diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index d45be05640ea..9e7efe542f69 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -125,6 +125,18 @@ config KEYSTONE_REMOTEPROC It's safe to say N here if you're not interested in the Keystone DSPs or just want to use a bare minimum kernel. +config PRU_REMOTEPROC + tristate "TI PRU remoteproc support" + depends on TI_PRUSS + default TI_PRUSS + help + Support for TI PRU remote processors present within a PRU-ICSS + subsystem via the remote processor framework. + + Say Y or M here to support the Programmable Realtime Unit (PRU) + processors on various TI SoCs. It's safe to say N here if you're + not interested in the PRU or if you are unsure. + config QCOM_PIL_INFO tristate diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index da2ace4ec86c..bb26c9e4ef9c 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o +obj-$(CONFIG_PRU_REMOTEPROC) += pru_rproc.o obj-$(CONFIG_QCOM_PIL_INFO) += qcom_pil_info.o obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c new file mode 100644 index 000000000000..d33392bbd8af --- /dev/null +++ b/drivers/remoteproc/pru_rproc.c @@ -0,0 +1,433 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PRU-ICSS remoteproc driver for various TI SoCs + * + * Copyright (C) 2014-2020 Texas Instruments Incorporated - https://www.ti.com/ + * + * Author(s): + * Suman Anna + * Andrew F. Davis + * Grzegorz Jaszczyk for Texas Instruments + */ + +#include +#include +#include +#include +#include + +#include "remoteproc_internal.h" +#include "remoteproc_elf_helpers.h" + +/* PRU_ICSS_PRU_CTRL registers */ +#define PRU_CTRL_CTRL 0x0000 +#define PRU_CTRL_STS 0x0004 + +/* CTRL register bit-fields */ +#define CTRL_CTRL_SOFT_RST_N BIT(0) +#define CTRL_CTRL_EN BIT(1) +#define CTRL_CTRL_SLEEPING BIT(2) +#define CTRL_CTRL_CTR_EN BIT(3) +#define CTRL_CTRL_SINGLE_STEP BIT(8) +#define CTRL_CTRL_RUNSTATE BIT(15) + +/* PRU Core IRAM address masks */ +#define PRU_IRAM_ADDR_MASK 0x3ffff +#define PRU0_IRAM_ADDR_MASK 0x34000 +#define PRU1_IRAM_ADDR_MASK 0x38000 + +/* PRU device addresses for various type of PRU RAMs */ +#define PRU_IRAM_DA 0 /* Instruction RAM */ +#define PRU_PDRAM_DA 0 /* Primary Data RAM */ +#define PRU_SDRAM_DA 0x2000 /* Secondary Data RAM */ +#define PRU_SHRDRAM_DA 0x10000 /* Shared Data RAM */ + +/** + * enum pru_iomem - PRU core memory/register range identifiers + * + * @PRU_IOMEM_IRAM: PRU Instruction RAM range + * @PRU_IOMEM_CTRL: PRU Control register range + * @PRU_IOMEM_DEBUG: PRU Debug register range + * @PRU_IOMEM_MAX: just keep this one at the end + */ +enum pru_iomem { + PRU_IOMEM_IRAM = 0, + PRU_IOMEM_CTRL, + PRU_IOMEM_DEBUG, + PRU_IOMEM_MAX, +}; + +/** + * struct pru_rproc - PRU remoteproc structure + * @id: id of the PRU core within the PRUSS + * @dev: PRU core device pointer + * @pruss: back-reference to parent PRUSS structure + * @rproc: remoteproc pointer for this PRU core + * @mem_regions: data for each of the PRU memory regions + * @fw_name: name of firmware image used during loading + */ +struct pru_rproc { + int id; + struct device *dev; + struct pruss *pruss; + struct rproc *rproc; + struct pruss_mem_region mem_regions[PRU_IOMEM_MAX]; + const char *fw_name; +}; + +static inline u32 pru_control_read_reg(struct pru_rproc *pru, unsigned int reg) +{ + return readl_relaxed(pru->mem_regions[PRU_IOMEM_CTRL].va + reg); +} + +static inline +void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val) +{ + writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg); +} + +static int pru_rproc_start(struct rproc *rproc) +{ + struct device *dev = &rproc->dev; + struct pru_rproc *pru = rproc->priv; + u32 val; + + dev_dbg(dev, "starting PRU%d: entry-point = 0x%llx\n", + pru->id, (rproc->bootaddr >> 2)); + + val = CTRL_CTRL_EN | ((rproc->bootaddr >> 2) << 16); + pru_control_write_reg(pru, PRU_CTRL_CTRL, val); + + return 0; +} + +static int pru_rproc_stop(struct rproc *rproc) +{ + struct device *dev = &rproc->dev; + struct pru_rproc *pru = rproc->priv; + u32 val; + + dev_dbg(dev, "stopping PRU%d\n", pru->id); + + val = pru_control_read_reg(pru, PRU_CTRL_CTRL); + val &= ~CTRL_CTRL_EN; + pru_control_write_reg(pru, PRU_CTRL_CTRL, val); + + return 0; +} + +/* + * Convert PRU device address (data spaces only) to kernel virtual address. + * + * Each PRU has access to all data memories within the PRUSS, accessible at + * different ranges. So, look through both its primary and secondary Data + * RAMs as well as any shared Data RAM to convert a PRU device address to + * kernel virtual address. Data RAM0 is primary Data RAM for PRU0 and Data + * RAM1 is primary Data RAM for PRU1. + */ +static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len) +{ + struct pruss_mem_region dram0, dram1, shrd_ram; + struct pruss *pruss = pru->pruss; + u32 offset; + void *va = NULL; + + if (len == 0) + return NULL; + + dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0]; + dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1]; + /* PRU1 has its local RAM addresses reversed */ + if (pru->id == 1) + swap(dram0, dram1); + shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2]; + + if (da >= PRU_PDRAM_DA && da + len <= PRU_PDRAM_DA + dram0.size) { + offset = da - PRU_PDRAM_DA; + va = (__force void *)(dram0.va + offset); + } else if (da >= PRU_SDRAM_DA && + da + len <= PRU_SDRAM_DA + dram1.size) { + offset = da - PRU_SDRAM_DA; + va = (__force void *)(dram1.va + offset); + } else if (da >= PRU_SHRDRAM_DA && + da + len <= PRU_SHRDRAM_DA + shrd_ram.size) { + offset = da - PRU_SHRDRAM_DA; + va = (__force void *)(shrd_ram.va + offset); + } + + return va; +} + +/* + * Convert PRU device address (instruction space) to kernel virtual address. + * + * A PRU does not have an unified address space. Each PRU has its very own + * private Instruction RAM, and its device address is identical to that of + * its primary Data RAM device address. + */ +static void *pru_i_da_to_va(struct pru_rproc *pru, u32 da, size_t len) +{ + u32 offset; + void *va = NULL; + + if (len == 0) + return NULL; + + if (da >= PRU_IRAM_DA && + da + len <= PRU_IRAM_DA + pru->mem_regions[PRU_IOMEM_IRAM].size) { + offset = da - PRU_IRAM_DA; + va = (__force void *)(pru->mem_regions[PRU_IOMEM_IRAM].va + + offset); + } + + return va; +} + +/* + * Provide address translations for only PRU Data RAMs through the remoteproc + * core for any PRU client drivers. The PRU Instruction RAM access is restricted + * only to the PRU loader code. + */ +static void *pru_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len) +{ + struct pru_rproc *pru = rproc->priv; + + return pru_d_da_to_va(pru, da, len); +} + +/* PRU-specific address translator used by PRU loader. */ +static void *pru_da_to_va(struct rproc *rproc, u64 da, size_t len, bool is_iram) +{ + struct pru_rproc *pru = rproc->priv; + void *va; + + if (is_iram) + va = pru_i_da_to_va(pru, da, len); + else + va = pru_d_da_to_va(pru, da, len); + + return va; +} + +static struct rproc_ops pru_rproc_ops = { + .start = pru_rproc_start, + .stop = pru_rproc_stop, + .da_to_va = pru_rproc_da_to_va, +}; + +static int +pru_rproc_load_elf_segments(struct rproc *rproc, const struct firmware *fw) +{ + struct device *dev = &rproc->dev; + struct elf32_hdr *ehdr; + struct elf32_phdr *phdr; + int i, ret = 0; + const u8 *elf_data = fw->data; + + ehdr = (struct elf32_hdr *)elf_data; + phdr = (struct elf32_phdr *)(elf_data + ehdr->e_phoff); + + /* go through the available ELF segments */ + for (i = 0; i < ehdr->e_phnum; i++, phdr++) { + u32 da = phdr->p_paddr; + u32 memsz = phdr->p_memsz; + u32 filesz = phdr->p_filesz; + u32 offset = phdr->p_offset; + bool is_iram; + void *ptr; + + if (phdr->p_type != PT_LOAD || !filesz) + continue; + + dev_dbg(dev, "phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n", + phdr->p_type, da, memsz, filesz); + + if (filesz > memsz) { + dev_err(dev, "bad phdr filesz 0x%x memsz 0x%x\n", + filesz, memsz); + ret = -EINVAL; + break; + } + + if (offset + filesz > fw->size) { + dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n", + offset + filesz, fw->size); + ret = -EINVAL; + break; + } + + /* grab the kernel address for this device address */ + is_iram = phdr->p_flags & PF_X; + ptr = pru_da_to_va(rproc, da, memsz, is_iram); + if (!ptr) { + dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz); + ret = -EINVAL; + break; + } + + memcpy(ptr, elf_data + phdr->p_offset, filesz); + + /* skip the memzero logic performed by remoteproc ELF loader */ + } + + return ret; +} + +/* + * Use a custom parse_fw callback function for dealing with PRU firmware + * specific sections. + */ +static int pru_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) +{ + int ret; + + /* load optional rsc table */ + ret = rproc_elf_load_rsc_table(rproc, fw); + if (ret == -EINVAL) + dev_dbg(&rproc->dev, "no resource table found for this fw\n"); + else if (ret) + return ret; + + return 0; +} + +/* + * Compute PRU id based on the IRAM addresses. The PRU IRAMs are + * always at a particular offset within the PRUSS address space. + */ +static int pru_rproc_set_id(struct pru_rproc *pru) +{ + int ret = 0; + + switch (pru->mem_regions[PRU_IOMEM_IRAM].pa & PRU_IRAM_ADDR_MASK) { + case PRU0_IRAM_ADDR_MASK: + pru->id = 0; + break; + case PRU1_IRAM_ADDR_MASK: + pru->id = 1; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int pru_rproc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct platform_device *ppdev = to_platform_device(dev->parent); + struct pru_rproc *pru; + const char *fw_name; + struct rproc *rproc = NULL; + struct resource *res; + int i, ret; + const char *mem_names[PRU_IOMEM_MAX] = { "iram", "control", "debug" }; + + ret = of_property_read_string(np, "firmware-name", &fw_name); + if (ret) { + dev_err(dev, "unable to retrieve firmware-name %d\n", ret); + return ret; + } + + rproc = devm_rproc_alloc(dev, pdev->name, &pru_rproc_ops, fw_name, + sizeof(*pru)); + if (!rproc) { + dev_err(dev, "rproc_alloc failed\n"); + return -ENOMEM; + } + /* use a custom load function to deal with PRU-specific quirks */ + rproc->ops->load = pru_rproc_load_elf_segments; + + /* use a custom parse function to deal with PRU-specific resources */ + rproc->ops->parse_fw = pru_rproc_parse_fw; + + /* error recovery is not supported for PRUs */ + rproc->recovery_disabled = true; + + /* + * rproc_add will auto-boot the processor normally, but this is not + * desired with PRU client driven boot-flow methodology. A PRU + * application/client driver will boot the corresponding PRU + * remote-processor as part of its state machine either through the + * remoteproc sysfs interface or through the equivalent kernel API. + */ + rproc->auto_boot = false; + + pru = rproc->priv; + pru->dev = dev; + pru->pruss = platform_get_drvdata(ppdev); + pru->rproc = rproc; + pru->fw_name = fw_name; + + for (i = 0; i < ARRAY_SIZE(mem_names); i++) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + mem_names[i]); + pru->mem_regions[i].va = devm_ioremap_resource(dev, res); + if (IS_ERR(pru->mem_regions[i].va)) { + dev_err(dev, "failed to parse and map memory resource %d %s\n", + i, mem_names[i]); + ret = PTR_ERR(pru->mem_regions[i].va); + return ret; + } + pru->mem_regions[i].pa = res->start; + pru->mem_regions[i].size = resource_size(res); + + dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %pK\n", + mem_names[i], &pru->mem_regions[i].pa, + pru->mem_regions[i].size, pru->mem_regions[i].va); + } + + ret = pru_rproc_set_id(pru); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, rproc); + + ret = devm_rproc_add(dev, pru->rproc); + if (ret) { + dev_err(dev, "rproc_add failed: %d\n", ret); + return ret; + } + + dev_dbg(dev, "PRU rproc node %pOF probed successfully\n", np); + + return 0; +} + +static int pru_rproc_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rproc *rproc = platform_get_drvdata(pdev); + + dev_dbg(dev, "%s: removing rproc %s\n", __func__, rproc->name); + + return 0; +} + +static const struct of_device_id pru_rproc_match[] = { + { .compatible = "ti,am3356-pru", }, + { .compatible = "ti,am4376-pru", }, + { .compatible = "ti,am5728-pru", }, + { .compatible = "ti,k2g-pru", }, + {}, +}; +MODULE_DEVICE_TABLE(of, pru_rproc_match); + +static struct platform_driver pru_rproc_driver = { + .driver = { + .name = "pru-rproc", + .of_match_table = pru_rproc_match, + .suppress_bind_attrs = true, + }, + .probe = pru_rproc_probe, + .remove = pru_rproc_remove, +}; +module_platform_driver(pru_rproc_driver); + +MODULE_AUTHOR("Suman Anna "); +MODULE_AUTHOR("Andrew F. Davis "); +MODULE_AUTHOR("Grzegorz Jaszczyk "); +MODULE_DESCRIPTION("PRU-ICSS Remote Processor Driver"); +MODULE_LICENSE("GPL v2");