hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'next/late' with mainline 

* next/late: (25 commits)
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  clk: samsung: exynos5433: Add data for 250MHz and 278MHz PLL rates
  clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ARM64: dts: meson-gxbb-vega-s95: Add LED
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2017-03-02 17:52:44 +01:00
parent b2e3c4319d 3e011039a3
commit d4b80d9aac
26 changed files with 842 additions and 233 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/arm/amlogic.txt
View File

@ -40,6 +40,8 @@ Board compatible values:
- "hardkernel,odroid-c2" (Meson gxbb)
- "amlogic,p200" (Meson gxbb)
- "amlogic,p201" (Meson gxbb)
- "wetek,hub" (Meson gxbb)
- "wetek,play2" (Meson gxbb)
- "amlogic,p212" (Meson gxl s905x)
- "amlogic,p230" (Meson gxl s905d)
- "amlogic,p231" (Meson gxl s905d)

1
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -329,6 +329,7 @@ virtio Virtual I/O Device Specification, developed by the OASIS consortium
vivante Vivante Corporation
voipac Voipac Technologies s.r.o.
wd Western Digital Corp.
wetek WeTek Electronics, limited.
wexler Wexler
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics

8
arch/arm64/boot/dts/amlogic/Makefile
View File

@ -5,12 +5,14 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
always := $(dtb-y)

68
arch/arm64/boot/dts/amlogic/meson-gx.dtsi
View File

@ -83,6 +83,7 @@
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
cpu1: cpu@1 {
@ -91,6 +92,7 @@
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
cpu2: cpu@2 {
@ -99,6 +101,7 @@
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
cpu3: cpu@3 {
@ -107,6 +110,7 @@
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
l2: l2-cache0 {
@ -171,6 +175,28 @@
};
};
scpi {
compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
mboxes = <&mailbox 1 &mailbox 2>;
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
clock-output-names = "vcpu";
};
};
scpi_sensors: sensors {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
@ -229,6 +255,14 @@
status = "disabled";
};
saradc: adc@8680 {
compatible = "amlogic,meson-saradc";
reg = <0x0 0x8680 0x0 0x34>;
#io-channel-cells = <1>;
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>;
@ -282,6 +316,25 @@
#address-cells = <0>;
};
sram: sram@c8000000 {
compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
reg = <0x0 0xc8000000 0x0 0x14000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0xc8000000 0x14000>;
cpu_scp_lpri: scp-shmem@0 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13000 0x400>;
};
cpu_scp_hpri: scp-shmem@200 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13400 0x400>;
};
};
aobus: aobus@c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
@ -297,6 +350,21 @@
status = "disabled";
};
uart_AO_B: serial@4e0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004e0 0x0 0x14>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
pwm_AO_ab: pwm@550 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x00550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;

50
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
View File

@ -45,10 +45,55 @@
/dts-v1/;
#include "meson-gxbb-p20x.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "amlogic,p200", "amlogic,meson-gxbb";
model = "Amlogic Meson GXBB P200 Development Board";
avdd18_usb_adc: regulator-avdd18_usb_adc {
compatible = "regulator-fixed";
regulator-name = "AVDD18_USB_ADC";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
adc_keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
button-home {
label = "Home";
linux,code = <KEY_HOME>;
press-threshold-microvolt = <900000>; /* 50% */
};
button-esc {
label = "Esc";
linux,code = <KEY_ESC>;
press-threshold-microvolt = <684000>; /* 38% */
};
button-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
press-threshold-microvolt = <468000>; /* 26% */
};
button-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
press-threshold-microvolt = <252000>; /* 14% */
};
button-menu {
label = "Menu";
linux,code = <KEY_MENU>;
press-threshold-microvolt = <0>; /* 0% */
};
};
};
&i2c_B {
@ -56,3 +101,8 @@
pinctrl-0 = <&i2c_b_pins>;
pinctrl-names = "default";
};
&saradc {
status = "okay";
vref-supply = <&avdd18_usb_adc>;
};

11
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
View File

@ -53,6 +53,17 @@
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
blue {
label = "vega-s95:blue:on";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
};
};
usb_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed";

66
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts Normal file
View File

@ -0,0 +1,66 @@
/*
* Copyright (c) 2016 BayLibre, Inc.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxbb-p20x.dtsi"
/ {
compatible = "wetek,hub", "amlogic,meson-gxbb";
model = "WeTek Hub";
leds {
compatible = "gpio-leds";
system {
label = "wetek-play:system-status";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
};
};
cvbs-connector {
status = "disabled";
};
};

94
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts Normal file
View File

@ -0,0 +1,94 @@
/*
* Copyright (c) 2016 BayLibre, Inc.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxbb-p20x.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "wetek,play2", "amlogic,meson-gxbb";
model = "WeTek Play 2";
leds {
compatible = "gpio-leds";
system {
label = "wetek-play:system-status";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
};
wifi {
label = "wetek-play:wifi-status";
gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
ethernet {
label = "wetek-play:ethernet-status";
gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button@0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
};
};
};
&i2c_A {
status = "okay";
pinctrl-0 = <&i2c_a_pins>;
pinctrl-names = "default";
};

128
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
View File

@ -50,28 +50,6 @@
/ {
compatible = "amlogic,meson-gxbb";
scpi {
compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
mboxes = <&mailbox 1 &mailbox 2>;
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
clock-output-names = "vcpu";
};
};
scpi_sensors: sensors {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
soc {
usb0_phy: phy@c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy";
@ -93,25 +71,6 @@
status = "disabled";
};
sram: sram@c8000000 {
compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
reg = <0x0 0xc8000000 0x0 0x14000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0xc8000000 0x14000>;
cpu_scp_lpri: scp-shmem@0 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13000 0x400>;
};
cpu_scp_hpri: scp-shmem@200 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13400 0x400>;
};
};
usb0: usb@c9000000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9000000 0x0 0x40000>;
@ -138,22 +97,6 @@
};
};
&cpu0 {
clocks = <&scpi_dvfs 0>;
};
&cpu1 {
clocks = <&scpi_dvfs 0>;
};
&cpu2 {
clocks = <&scpi_dvfs 0>;
};
&cpu3 {
clocks = <&scpi_dvfs 0>;
};
&cbus {
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
@ -195,6 +138,29 @@
};
};
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
};
};
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
@ -340,6 +306,14 @@
};
};
uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
@ -348,6 +322,14 @@
};
};
uart_b_cts_rts_pins: uart_b_cts_rts {
mux {
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
@ -356,6 +338,14 @@
};
};
uart_c_cts_rts_pins: uart_c_cts_rts {
mux {
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
@ -463,6 +453,20 @@
function = "pwm_f_y";
};
};
hdmi_hpd_pins: hdmi_hpd {
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
};
};
hdmi_i2c_pins: hdmi_i2c {
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
};
};
};
};
@ -486,6 +490,16 @@
clocks = <&clkc CLKID_I2C>;
};
&saradc {
compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
<&clkc CLKID_SAR_ADC>,
<&clkc CLKID_SANA>,
<&clkc CLKID_SAR_ADC_CLK>,
<&clkc CLKID_SAR_ADC_SEL>;
clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
};
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,

0
arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts → arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
View File

78
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
View File

@ -88,12 +88,42 @@
};
};
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
};
};
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
};
};
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
};
};
};
};
@ -163,6 +193,14 @@
};
};
uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
@ -171,6 +209,14 @@
};
};
uart_b_cts_rts_pins: uart_b_cts_rts {
mux {
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
@ -179,6 +225,14 @@
};
};
uart_c_cts_rts_pins: uart_c_cts_rts {
mux {
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
@ -229,6 +283,20 @@
function = "pwm_e";
};
};
hdmi_hpd_pins: hdmi_hpd {
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
};
};
hdmi_i2c_pins: hdmi_i2c {
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
};
};
};
eth-phy-mux {
@ -279,6 +347,16 @@
clocks = <&clkc CLKID_I2C>;
};
&saradc {
compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
<&clkc CLKID_SAR_ADC>,
<&clkc CLKID_SANA>,
<&clkc CLKID_SAR_ADC_CLK>,
<&clkc CLKID_SAR_ADC_SEL>;
clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
};
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,

0
arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts → arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
View File

0
arch/arm64/boot/dts/amlogic/meson-gxm-s912-q201.dts → arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
View File

14
arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
View File

@ -85,6 +85,7 @@
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
};
cpu5: cpu@101 {
@ -93,6 +94,7 @@
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
};
cpu6: cpu@102 {
@ -101,6 +103,7 @@
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
};
cpu7: cpu@103 {
@ -109,10 +112,21 @@
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
};
};
};
&saradc {
compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
};
&scpi_dvfs {
clock-indices = <0 1>;
clock-output-names = "vbig", "vlittle";
};
&vpu {
compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
};

12
arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
View File

@ -217,18 +217,6 @@
assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
};
&cmu_disp {
assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
<&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
assigned-clock-parents = <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
<0>,
<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
assigned-clock-rates = <0>, <400000000>;
};
&cmu_fsys {
assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
<&cmu_top CLK_MOUT_SCLK_USBHOST30>,

34
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
View File

@ -18,6 +18,40 @@
compatible = "samsung,tm2", "samsung,exynos5433";
};
&cmu_disp {
/*
* TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
* clocks properties for DISP CMU for each board to keep them together
* for easier review and maintenance.
*/
assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
<&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
<&cmu_disp CLK_MOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
assigned-clock-parents = <0>, <0>,
<&cmu_mif CLK_ACLK_DISP_333>,
<&cmu_mif CLK_SCLK_DSIM0_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
<&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
assigned-clock-rates = <250000000>, <400000000>;
};
&hsi2c_9 {
status = "okay";

34
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
View File

@ -18,6 +18,40 @@
compatible = "samsung,tm2e", "samsung,exynos5433";
};
&cmu_disp {
/*
* TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
* clocks properties for DISP CMU for each board to keep them together
* for easier review and maintenance.
*/
assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
<&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
<&cmu_disp CLK_MOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
assigned-clock-parents = <0>, <0>,
<&cmu_mif CLK_ACLK_DISP_333>,
<&cmu_mif CLK_SCLK_DSIM0_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
<&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
assigned-clock-rates = <278000000>, <400000000>;
};
&ldo31_reg {
regulator-name = "TSP_VDD_1.8V_AP";
regulator-min-microvolt = <1800000>;

49
arch/arm64/boot/dts/exynos/exynos7-espresso.dts
View File

@ -13,6 +13,7 @@
#include "exynos7.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@ -32,6 +33,29 @@
device_type = "memory";
reg = <0x0 0x40000000 0x0 0xC0000000>;
};
usb30_vbus_reg: regulator-usb30 {
compatible = "regulator-fixed";
regulator-name = "VBUS_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb30_vbus_en>;
enable-active-high;
};
usb3drd_boost_5v: regulator-usb3drd-boost {
compatible = "regulator-fixed";
regulator-name = "VUSB_VBUS_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3drd_boost_en>;
enable-active-high;
};
};
&fin_pll {
@ -328,8 +352,8 @@
&pinctrl_alive {
pmic_irq: pmic-irq {
samsung,pins = "gpa0-2";
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
@ -365,3 +389,24 @@
vqmmc-supply = <&ldo2_reg>;
disable-wp;
};
&pinctrl_bus1 {
usb30_vbus_en: usb30-vbus-en {
samsung,pins = "gph1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
usb3drd_boost_en: usb3drd-boost-en {
samsung,pins = "gpf4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
&usbdrd_phy {
vbus-supply = <&usb30_vbus_reg>;
vbus-boost-supply = <&usb3drd_boost_5v>;
};

302
arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
View File

@ -12,6 +12,8 @@
* published by the Free Software Foundation.
*/
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_alive {
gpa0: gpa0 {
gpio-controller;
@ -187,163 +189,163 @@
hs_i2c10_bus: hs-i2c10-bus {
samsung,pins = "gpb0-1", "gpb0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c11_bus: hs-i2c11-bus {
samsung,pins = "gpb0-3", "gpb0-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c2_bus: hs-i2c2-bus {
samsung,pins = "gpd0-3", "gpd0-2";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_data: uart0-data {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_data: uart2-data {
samsung,pins = "gpd1-4", "gpd1-5";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c3_bus: hs-i2c3-bus {
samsung,pins = "gpd1-3", "gpd1-2";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c0_bus: hs-i2c0-bus {
samsung,pins = "gpd2-1", "gpd2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c1_bus: hs-i2c1-bus {
samsung,pins = "gpd2-3", "gpd2-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c9_bus: hs-i2c9-bus {
samsung,pins = "gpd2-7", "gpd2-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpd2-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpd2-5";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out {
samsung,pins = "gpd2-6";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out {
samsung,pins = "gpd2-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c8_bus: hs-i2c8-bus {
samsung,pins = "gpd5-3", "gpd5-2";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart3_data: uart3-data {
samsung,pins = "gpd5-0", "gpd5-1";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus {
samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c4_bus: hs-i2c4-bus {
samsung,pins = "gpg3-1", "gpg3-0";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c5_bus: hs-i2c5-bus {
samsung,pins = "gpg3-3", "gpg3-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@ -358,9 +360,9 @@
hs_i2c6_bus: hs-i2c6-bus {
samsung,pins = "gpj0-1", "gpj0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@ -375,9 +377,9 @@
hs_i2c7_bus: hs-i2c7-bus {
samsung,pins = "gpj1-1", "gpj1-0";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@ -392,9 +394,9 @@
spi3_bus: spi3-bus {
samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@ -409,9 +411,9 @@
spi4_bus: spi4-bus {
samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@ -426,37 +428,37 @@
sd2_clk: sd2-clk {
samsung,pins = "gpr4-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpr4-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpr4-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpr4-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
@ -495,107 +497,107 @@
sd0_clk: sd0-clk {
samsung,pins = "gpr0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <4>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpr0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <4>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_ds: sd0-ds {
samsung,pins = "gpr0-2";
samsung,pin-function = <2>;
samsung,pin-pud = <1>;
samsung,pin-drv = <4>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_qrdy: sd0-qrdy {
samsung,pins = "gpr0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <1>;
samsung,pin-drv = <4>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpr1-0";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <4>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <4>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <4>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpr2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <2>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpr2-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <2>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_ds: sd1-ds {
samsung,pins = "gpr2-2";
samsung,pin-function = <2>;
samsung,pin-pud = <1>;
samsung,pin-drv = <6>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
sd1_qrdy: sd1-qrdy {
samsung,pins = "gpr2-3";
samsung,pin-function = <2>;
samsung,pin-pud = <1>;
samsung,pin-drv = <6>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
sd1_int: sd1-int {
samsung,pins = "gpr2-4";
samsung,pin-function = <2>;
samsung,pin-pud = <1>;
samsung,pin-drv = <6>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpr3-0";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <2>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <2>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_bus8: sd1-bus-width8 {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <2>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
};
@ -682,22 +684,22 @@
spi5_bus: spi5-bus {
samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
ufs_refclk_out: ufs-refclk-out {
samsung,pins = "gpg2-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <2>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
};
ufs_rst_n: ufs-rst-n {
samsung,pins = "gph1-5";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};

34
arch/arm64/boot/dts/exynos/exynos7.dtsi
View File

@ -603,6 +603,40 @@
#include "exynos7-trip-points.dtsi"
};
};
usbdrd_phy: phy@15500000 {
compatible = "samsung,exynos7-usbdrd-phy";
reg = <0x15500000 0x100>;
clocks = <&clock_fsys0 ACLK_USBDRD300>,
<&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>,
<&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
<&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>,
<&clock_fsys0 SCLK_USBDRD300_REFCLK>;
clock-names = "phy", "ref", "phy_pipe",
"phy_utmi", "itp";
samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <1>;
};
usbdrd3 {
compatible = "samsung,exynos7-dwusb3";
clocks = <&clock_fsys0 ACLK_USBDRD300>,
<&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
<&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>;
clock-names = "usbdrd30", "usbdrd30_susp_clk",
"usbdrd30_axius_clk";
#address-cells = <1>;
#size-cells = <1>;
ranges;
dwc3@15400000 {
compatible = "snps,dwc3";
reg = <0x15400000 0x10000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
};
};
};
};

48
drivers/clk/meson/gxbb.c
View File

@ -564,6 +564,46 @@ static struct clk_gate gxbb_clk81 = {
},
};
static struct clk_mux gxbb_sar_adc_clk_sel = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.mask = 0x3,
.shift = 9,
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_sel",
.ops = &clk_mux_ops,
/* NOTE: The datasheet doesn't list the parents for bit 10 */
.parent_names = (const char *[]){ "xtal", "clk81", },
.num_parents = 2,
},
};
static struct clk_divider gxbb_sar_adc_clk_div = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.shift = 0,
.width = 8,
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_div",
.ops = &clk_divider_ops,
.parent_names = (const char *[]){ "sar_adc_clk_sel" },
.num_parents = 1,
},
};
static struct clk_gate gxbb_sar_adc_clk = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.bit_idx = 8,
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk",
.ops = &clk_gate_ops,
.parent_names = (const char *[]){ "sar_adc_clk_div" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
/* Everything Else (EE) domain gates */
static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
@ -754,6 +794,9 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
[CLKID_SD_EMMC_A] = &gxbb_emmc_a.hw,
[CLKID_SD_EMMC_B] = &gxbb_emmc_b.hw,
[CLKID_SD_EMMC_C] = &gxbb_emmc_c.hw,
[CLKID_SAR_ADC_CLK] = &gxbb_sar_adc_clk.hw,
[CLKID_SAR_ADC_SEL] = &gxbb_sar_adc_clk_sel.hw,
[CLKID_SAR_ADC_DIV] = &gxbb_sar_adc_clk_div.hw,
},
.num = NR_CLKS,
};
@ -856,6 +899,7 @@ static struct clk_gate *gxbb_clk_gates[] = {
&gxbb_emmc_a,
&gxbb_emmc_b,
&gxbb_emmc_c,
&gxbb_sar_adc_clk,
};
static int gxbb_clkc_probe(struct platform_device *pdev)
@ -888,6 +932,10 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
gxbb_mpeg_clk_sel.reg = clk_base + (u64)gxbb_mpeg_clk_sel.reg;
gxbb_mpeg_clk_div.reg = clk_base + (u64)gxbb_mpeg_clk_div.reg;
/* Populate the base address for the SAR ADC clks */
gxbb_sar_adc_clk_sel.reg = clk_base + (u64)gxbb_sar_adc_clk_sel.reg;
gxbb_sar_adc_clk_div.reg = clk_base + (u64)gxbb_sar_adc_clk_div.reg;
/* Populate base address for gates */
for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++)
gxbb_clk_gates[i]->reg = clk_base +

15
drivers/clk/meson/gxbb.h
View File

@ -191,7 +191,7 @@
#define CLKID_PERIPHS 20
#define CLKID_SPICC 21
/* CLKID_I2C */
#define CLKID_SAR_ADC 23
/* #define CLKID_SAR_ADC */
#define CLKID_SMART_CARD 24
#define CLKID_RNG0 25
#define CLKID_UART0 26
@ -204,7 +204,7 @@
#define CLKID_ASSIST_MISC 33
/* CLKID_SPI */
#define CLKID_I2S_SPDIF 35
#define CLKID_ETH 36
/* CLKID_ETH */
#define CLKID_DEMUX 37
#define CLKID_AIU_GLUE 38
#define CLKID_IEC958 39
@ -231,13 +231,13 @@
#define CLKID_AHB_DATA_BUS 60
#define CLKID_AHB_CTRL_BUS 61
#define CLKID_HDMI_INTR_SYNC 62
#define CLKID_HDMI_PCLK 63
/* CLKID_HDMI_PCLK */
/* CLKID_USB1_DDR_BRIDGE */
/* CLKID_USB0_DDR_BRIDGE */
#define CLKID_MMC_PCLK 66
#define CLKID_DVIN 67
#define CLKID_UART2 68
#define CLKID_SANA 69
/* #define CLKID_SANA */
#define CLKID_VPU_INTR 70
#define CLKID_SEC_AHB_AHB3_BRIDGE 71
#define CLKID_CLK81_A53 72
@ -245,7 +245,7 @@
#define CLKID_VCLK2_VENCI1 74
#define CLKID_VCLK2_VENCP0 75
#define CLKID_VCLK2_VENCP1 76
#define CLKID_GCLK_VENCI_INT0 77
/* CLKID_GCLK_VENCI_INT0 */
#define CLKID_GCLK_VENCI_INT 78
#define CLKID_DAC_CLK 79
#define CLKID_AOCLK_GATE 80
@ -265,8 +265,11 @@
/* CLKID_SD_EMMC_A */
/* CLKID_SD_EMMC_B */
/* CLKID_SD_EMMC_C */
/* CLKID_SAR_ADC_CLK */
/* CLKID_SAR_ADC_SEL */
#define CLKID_SAR_ADC_DIV 99
#define NR_CLKS 97
#define NR_CLKS 100
/* include the CLKIDs that have been made part of the stable DT binding */
#include <dt-bindings/clock/gxbb-clkc.h>

8
drivers/clk/samsung/clk-exynos5433.c
View File

@ -739,7 +739,9 @@ static const struct samsung_pll_rate_table exynos5443_pll_rates[] __initconst =
PLL_35XX_RATE(350000000U, 350, 6, 2),
PLL_35XX_RATE(333000000U, 222, 4, 2),
PLL_35XX_RATE(300000000U, 500, 5, 3),
PLL_35XX_RATE(278000000U, 556, 6, 3),
PLL_35XX_RATE(266000000U, 532, 6, 3),
PLL_35XX_RATE(250000000U, 500, 6, 3),
PLL_35XX_RATE(200000000U, 400, 6, 3),
PLL_35XX_RATE(166000000U, 332, 6, 3),
PLL_35XX_RATE(160000000U, 320, 6, 3),
@ -2559,8 +2561,10 @@ static const struct samsung_fixed_rate_clock disp_fixed_clks[] __initconst = {
FRATE(0, "phyclk_mipidphy1_bitclkdiv8_phy", NULL, 0, 188000000),
FRATE(0, "phyclk_mipidphy1_rxclkesc0_phy", NULL, 0, 100000000),
/* PHY clocks from MIPI_DPHY0 */
FRATE(0, "phyclk_mipidphy0_bitclkdiv8_phy", NULL, 0, 188000000),
FRATE(0, "phyclk_mipidphy0_rxclkesc0_phy", NULL, 0, 100000000),
FRATE(CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY, "phyclk_mipidphy0_bitclkdiv8_phy",
NULL, 0, 188000000),
FRATE(CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY, "phyclk_mipidphy0_rxclkesc0_phy",
NULL, 0, 100000000),
/* PHY clocks from HDMI_PHY */
FRATE(CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY, "phyclk_hdmiphy_tmds_clko_phy",
NULL, 0, 300000000),

5
include/dt-bindings/clock/exynos5433.h
View File

@ -771,7 +771,10 @@
#define CLK_PCLK_DECON 113
#define DISP_NR_CLK 114
#define CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY 114
#define CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY 115
#define DISP_NR_CLK 116
/* CMU_AUD */
#define CLK_MOUT_AUD_PLL_USER 1

6
include/dt-bindings/clock/gxbb-clkc.h
View File

@ -14,15 +14,21 @@
#define CLKID_MPLL2 15
#define CLKID_SPI 34
#define CLKID_I2C 22
#define CLKID_SAR_ADC 23
#define CLKID_ETH 36
#define CLKID_USB0 50
#define CLKID_USB1 51
#define CLKID_USB 55
#define CLKID_HDMI_PCLK 63
#define CLKID_USB1_DDR_BRIDGE 64
#define CLKID_USB0_DDR_BRIDGE 65
#define CLKID_SANA 69
#define CLKID_GCLK_VENCI_INT0 77
#define CLKID_AO_I2C 93
#define CLKID_SD_EMMC_A 94
#define CLKID_SD_EMMC_B 95
#define CLKID_SD_EMMC_C 96
#define CLKID_SAR_ADC_CLK 97
#define CLKID_SAR_ADC_SEL 98
#endif /* __GXBB_CLKC_H */

8
include/dt-bindings/pinctrl/samsung.h
View File

@ -68,4 +68,12 @@
#define EXYNOS_PIN_FUNC_6 6
#define EXYNOS_PIN_FUNC_F 0xf
/* Drive strengths for Exynos7 FSYS1 block */
#define EXYNOS7_FSYS1_PIN_DRV_LV1 0
#define EXYNOS7_FSYS1_PIN_DRV_LV2 4
#define EXYNOS7_FSYS1_PIN_DRV_LV3 2
#define EXYNOS7_FSYS1_PIN_DRV_LV4 6
#define EXYNOS7_FSYS1_PIN_DRV_LV5 1
#define EXYNOS7_FSYS1_PIN_DRV_LV6 5
#endif /* __DT_BINDINGS_PINCTRL_SAMSUNG_H__ */