usb: host: ohci-st: Add OHCI driver support for ST STB devices
This patch adds the glue code required to ensure the on-chip OHCI controller works on STi consumer electronics SoC's from STMicroelectronics. It mainly manages the setting and enabling of the relevant clocks and manages the reset / power signals to the IP block. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Peter Griffin
Greg Kroah-Hartman
parent
e47c5a0906
commit
d115837259
|
|
@ -761,6 +761,14 @@ config USB_HCD_SSB
|
|||
|
||||
If unsure, say N.
|
||||
|
||||
config USB_HCD_ST
|
||||
tristate "ST USB driver for ST SoC Series"
|
||||
depends on ARCH_STI && OF
|
||||
select GENERIC_PHY
|
||||
help
|
||||
Enable support for the on-chip OHCI & EHCI controller found on
|
||||
STMicroelectronics consumer electronics SoC's.
|
||||
|
||||
config USB_HCD_TEST_MODE
|
||||
bool "HCD test mode support"
|
||||
---help---
|
||||
|
|
|
|||
|
|
@ -77,3 +77,4 @@ obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
|
|||
obj-$(CONFIG_USB_FUSBH200_HCD) += fusbh200-hcd.o
|
||||
obj-$(CONFIG_USB_FOTG210_HCD) += fotg210-hcd.o
|
||||
obj-$(CONFIG_USB_MAX3421_HCD) += max3421-hcd.o
|
||||
obj-$(CONFIG_USB_HCD_ST) += ehci-st.o ohci-st.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,349 @@
|
|||
/*
|
||||
* ST OHCI driver
|
||||
*
|
||||
* Copyright (C) 2014 STMicroelectronics – All Rights Reserved
|
||||
*
|
||||
* Author: Peter Griffin <peter.griffin@linaro.org>
|
||||
*
|
||||
* Derived from ohci-platform.c
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/hrtimer.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/phy/phy.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/reset.h>
|
||||
#include <linux/usb/ohci_pdriver.h>
|
||||
#include <linux/usb.h>
|
||||
#include <linux/usb/hcd.h>
|
||||
|
||||
#include "ohci.h"
|
||||
|
||||
#define USB_MAX_CLKS 3
|
||||
|
||||
struct st_ohci_platform_priv {
|
||||
struct clk *clks[USB_MAX_CLKS];
|
||||
struct clk *clk48;
|
||||
struct reset_control *rst;
|
||||
struct reset_control *pwr;
|
||||
struct phy *phy;
|
||||
};
|
||||
|
||||
#define DRIVER_DESC "OHCI STMicroelectronics driver"
|
||||
|
||||
#define hcd_to_ohci_priv(h) \
|
||||
((struct st_ohci_platform_priv *)hcd_to_ohci(h)->priv)
|
||||
|
||||
static const char hcd_name[] = "ohci-st";
|
||||
|
||||
static int st_ohci_platform_power_on(struct platform_device *dev)
|
||||
{
|
||||
struct usb_hcd *hcd = platform_get_drvdata(dev);
|
||||
struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
|
||||
int clk, ret;
|
||||
|
||||
ret = reset_control_deassert(priv->pwr);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = reset_control_deassert(priv->rst);
|
||||
if (ret)
|
||||
goto err_assert_power;
|
||||
|
||||
/* some SoCs don't have a dedicated 48Mhz clock, but those that do
|
||||
need the rate to be explicitly set */
|
||||
if (priv->clk48) {
|
||||
ret = clk_set_rate(priv->clk48, 48000000);
|
||||
if (ret)
|
||||
goto err_assert_reset;
|
||||
}
|
||||
|
||||
for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) {
|
||||
ret = clk_prepare_enable(priv->clks[clk]);
|
||||
if (ret)
|
||||
goto err_disable_clks;
|
||||
}
|
||||
|
||||
ret = phy_init(priv->phy);
|
||||
if (ret)
|
||||
goto err_disable_clks;
|
||||
|
||||
ret = phy_power_on(priv->phy);
|
||||
if (ret)
|
||||
goto err_exit_phy;
|
||||
|
||||
return 0;
|
||||
|
||||
err_exit_phy:
|
||||
phy_exit(priv->phy);
|
||||
err_disable_clks:
|
||||
while (--clk >= 0)
|
||||
clk_disable_unprepare(priv->clks[clk]);
|
||||
err_assert_reset:
|
||||
reset_control_assert(priv->rst);
|
||||
err_assert_power:
|
||||
reset_control_assert(priv->pwr);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void st_ohci_platform_power_off(struct platform_device *dev)
|
||||
{
|
||||
struct usb_hcd *hcd = platform_get_drvdata(dev);
|
||||
struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
|
||||
|
||||
int clk;
|
||||
|
||||
reset_control_assert(priv->pwr);
|
||||
|
||||
reset_control_assert(priv->rst);
|
||||
|
||||
phy_power_off(priv->phy);
|
||||
|
||||
phy_exit(priv->phy);
|
||||
|
||||
for (clk = USB_MAX_CLKS - 1; clk >= 0; clk--)
|
||||
if (priv->clks[clk])
|
||||
clk_disable_unprepare(priv->clks[clk]);
|
||||
}
|
||||
|
||||
static struct hc_driver __read_mostly ohci_platform_hc_driver;
|
||||
|
||||
static const struct ohci_driver_overrides platform_overrides __initconst = {
|
||||
.product_desc = "ST OHCI controller",
|
||||
.extra_priv_size = sizeof(struct st_ohci_platform_priv),
|
||||
};
|
||||
|
||||
static struct usb_ohci_pdata ohci_platform_defaults = {
|
||||
.power_on = st_ohci_platform_power_on,
|
||||
.power_suspend = st_ohci_platform_power_off,
|
||||
.power_off = st_ohci_platform_power_off,
|
||||
};
|
||||
|
||||
static int st_ohci_platform_probe(struct platform_device *dev)
|
||||
{
|
||||
struct usb_hcd *hcd;
|
||||
struct resource *res_mem;
|
||||
struct usb_ohci_pdata *pdata = &ohci_platform_defaults;
|
||||
struct st_ohci_platform_priv *priv;
|
||||
struct ohci_hcd *ohci;
|
||||
int err, irq, clk = 0;
|
||||
|
||||
if (usb_disabled())
|
||||
return -ENODEV;
|
||||
|
||||
irq = platform_get_irq(dev, 0);
|
||||
if (irq < 0) {
|
||||
dev_err(&dev->dev, "no irq provided");
|
||||
return irq;
|
||||
}
|
||||
|
||||
res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
||||
if (!res_mem) {
|
||||
dev_err(&dev->dev, "no memory resource provided");
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
|
||||
dev_name(&dev->dev));
|
||||
if (!hcd)
|
||||
return -ENOMEM;
|
||||
|
||||
platform_set_drvdata(dev, hcd);
|
||||
dev->dev.platform_data = pdata;
|
||||
priv = hcd_to_ohci_priv(hcd);
|
||||
ohci = hcd_to_ohci(hcd);
|
||||
|
||||
priv->phy = devm_phy_get(&dev->dev, "usb");
|
||||
if (IS_ERR(priv->phy)) {
|
||||
err = PTR_ERR(priv->phy);
|
||||
goto err_put_hcd;
|
||||
}
|
||||
|
||||
for (clk = 0; clk < USB_MAX_CLKS; clk++) {
|
||||
priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
|
||||
if (IS_ERR(priv->clks[clk])) {
|
||||
err = PTR_ERR(priv->clks[clk]);
|
||||
if (err == -EPROBE_DEFER)
|
||||
goto err_put_clks;
|
||||
priv->clks[clk] = NULL;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/* some SoCs don't have a dedicated 48Mhz clock, but those that
|
||||
do need the rate to be explicitly set */
|
||||
priv->clk48 = devm_clk_get(&dev->dev, "clk48");
|
||||
if (IS_ERR(priv->clk48)) {
|
||||
dev_info(&dev->dev, "48MHz clk not found\n");
|
||||
priv->clk48 = NULL;
|
||||
}
|
||||
|
||||
priv->pwr = devm_reset_control_get_optional(&dev->dev, "power");
|
||||
if (IS_ERR(priv->pwr)) {
|
||||
err = PTR_ERR(priv->pwr);
|
||||
goto err_put_clks;
|
||||
}
|
||||
|
||||
priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset");
|
||||
if (IS_ERR(priv->rst)) {
|
||||
err = PTR_ERR(priv->rst);
|
||||
goto err_put_clks;
|
||||
}
|
||||
|
||||
if (pdata->power_on) {
|
||||
err = pdata->power_on(dev);
|
||||
if (err < 0)
|
||||
goto err_power;
|
||||
}
|
||||
|
||||
hcd->rsrc_start = res_mem->start;
|
||||
hcd->rsrc_len = resource_size(res_mem);
|
||||
|
||||
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
|
||||
if (IS_ERR(hcd->regs)) {
|
||||
err = PTR_ERR(hcd->regs);
|
||||
goto err_power;
|
||||
}
|
||||
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
||||
if (err)
|
||||
goto err_power;
|
||||
|
||||
device_wakeup_enable(hcd->self.controller);
|
||||
|
||||
platform_set_drvdata(dev, hcd);
|
||||
|
||||
return err;
|
||||
|
||||
err_power:
|
||||
if (pdata->power_off)
|
||||
pdata->power_off(dev);
|
||||
|
||||
err_put_clks:
|
||||
while (--clk >= 0)
|
||||
clk_put(priv->clks[clk]);
|
||||
err_put_hcd:
|
||||
if (pdata == &ohci_platform_defaults)
|
||||
dev->dev.platform_data = NULL;
|
||||
|
||||
usb_put_hcd(hcd);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static int st_ohci_platform_remove(struct platform_device *dev)
|
||||
{
|
||||
struct usb_hcd *hcd = platform_get_drvdata(dev);
|
||||
struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
|
||||
struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
|
||||
int clk;
|
||||
|
||||
usb_remove_hcd(hcd);
|
||||
|
||||
if (pdata->power_off)
|
||||
pdata->power_off(dev);
|
||||
|
||||
|
||||
for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++)
|
||||
clk_put(priv->clks[clk]);
|
||||
|
||||
usb_put_hcd(hcd);
|
||||
|
||||
if (pdata == &ohci_platform_defaults)
|
||||
dev->dev.platform_data = NULL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
|
||||
static int st_ohci_suspend(struct device *dev)
|
||||
{
|
||||
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
||||
struct usb_ohci_pdata *pdata = dev->platform_data;
|
||||
struct platform_device *pdev =
|
||||
container_of(dev, struct platform_device, dev);
|
||||
bool do_wakeup = device_may_wakeup(dev);
|
||||
int ret;
|
||||
|
||||
ret = ohci_suspend(hcd, do_wakeup);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (pdata->power_suspend)
|
||||
pdata->power_suspend(pdev);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int st_ohci_resume(struct device *dev)
|
||||
{
|
||||
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
||||
struct usb_ohci_pdata *pdata = dev_get_platdata(dev);
|
||||
struct platform_device *pdev =
|
||||
container_of(dev, struct platform_device, dev);
|
||||
int err;
|
||||
|
||||
if (pdata->power_on) {
|
||||
err = pdata->power_on(pdev);
|
||||
if (err < 0)
|
||||
return err;
|
||||
}
|
||||
|
||||
ohci_resume(hcd, false);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(st_ohci_pm_ops, st_ohci_suspend, st_ohci_resume);
|
||||
|
||||
#endif /* CONFIG_PM_SLEEP */
|
||||
|
||||
static const struct of_device_id st_ohci_platform_ids[] = {
|
||||
{ .compatible = "st,st-ohci-300x", },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, st_ohci_platform_ids);
|
||||
|
||||
static struct platform_driver ohci_platform_driver = {
|
||||
.probe = st_ohci_platform_probe,
|
||||
.remove = st_ohci_platform_remove,
|
||||
.shutdown = usb_hcd_platform_shutdown,
|
||||
.driver = {
|
||||
.name = "st-ohci",
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
.pm = &st_ohci_pm_ops,
|
||||
#endif
|
||||
.of_match_table = st_ohci_platform_ids,
|
||||
}
|
||||
};
|
||||
|
||||
static int __init ohci_platform_init(void)
|
||||
{
|
||||
if (usb_disabled())
|
||||
return -ENODEV;
|
||||
|
||||
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
|
||||
|
||||
ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides);
|
||||
return platform_driver_register(&ohci_platform_driver);
|
||||
}
|
||||
module_init(ohci_platform_init);
|
||||
|
||||
static void __exit ohci_platform_cleanup(void)
|
||||
{
|
||||
platform_driver_unregister(&ohci_platform_driver);
|
||||
}
|
||||
module_exit(ohci_platform_cleanup);
|
||||
|
||||
MODULE_DESCRIPTION(DRIVER_DESC);
|
||||
MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue