diff --git a/arch/arc/Kbuild b/arch/arc/Kbuild new file mode 100644 index 000000000000..082d329d3245 --- /dev/null +++ b/arch/arc/Kbuild @@ -0,0 +1,2 @@ +obj-y += kernel/ +obj-y += mm/ diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig new file mode 100644 index 000000000000..b0b09aea98ff --- /dev/null +++ b/arch/arc/Kconfig @@ -0,0 +1,328 @@ +# +# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# + +config ARC + def_bool y + select ARCH_NO_VIRT_TO_BUS + # ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev + select DEVTMPFS if !INITRAMFS_SOURCE="" + select GENERIC_ATOMIC64 + select GENERIC_CLOCKEVENTS + select GENERIC_FIND_FIRST_BIT + # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP + select GENERIC_IRQ_SHOW + select GENERIC_PENDING_IRQ if SMP + select GENERIC_SMP_IDLE_THREAD + select HAVE_GENERIC_HARDIRQS + select MODULES_USE_ELF_RELA + +config SCHED_OMIT_FRAME_POINTER + def_bool y + +config GENERIC_CSUM + def_bool y + +config RWSEM_GENERIC_SPINLOCK + def_bool y + +config ARCH_FLATMEM_ENABLE + def_bool y + +config MMU + def_bool y + +config NO_IOPORT + def_bool y + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config GENERIC_HWEIGHT + def_bool y + +config BINFMT_ELF + def_bool y + +config HAVE_LATENCYTOP_SUPPORT + def_bool y + +config NO_DMA + def_bool n + +source "init/Kconfig" +source "kernel/Kconfig.freezer" + +menu "ARC Architecture Configuration" + +choice + prompt "ARC Platform" + default ARC_PLAT_FPGA_LEGACY + +config ARC_PLAT_FPGA_LEGACY + bool "\"Legacy\" ARC FPGA dev platform" + help + Support for ARC development platforms, provided by Synopsys. + These are based on FPGA or ISS. e.g. + - ARCAngel4 + - ML509 + - MetaWare ISS + +#New platform adds here +endchoice + +menu "ARC CPU Configuration" + +choice + prompt "ARC Core" + default ARC_CPU_770 + +config ARC_CPU_750D + bool "ARC750D" + help + Support for ARC750 core + +config ARC_CPU_770 + bool "ARC770" + select ARC_CPU_REL_4_10 + help + Support for ARC770 core introduced with Rel 4.10 (Summer 2011) + This core has a bunch of cool new features: + -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4) + Shared Address Spaces (for sharing TLB entires in MMU) + -Caches: New Prog Model, Region Flush + -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr + +endchoice + +config CPU_BIG_ENDIAN + bool "Enable Big Endian Mode" + default n + help + Build kernel for Big Endian Mode of ARC CPU + +menuconfig ARC_CACHE + bool "Enable Cache Support" + default y + +if ARC_CACHE + +config ARC_CACHE_LINE_SHIFT + int "Cache Line Length (as power of 2)" + range 5 7 + default "6" + help + Starting with ARC700 4.9, Cache line length is configurable, + This option specifies "N", with Line-len = 2 power N + So line lengths of 32, 64, 128 are specified by 5,6,7, respectively + Linux only supports same line lengths for I and D caches. + +config ARC_HAS_ICACHE + bool "Use Instruction Cache" + default y + +config ARC_HAS_DCACHE + bool "Use Data Cache" + default y + +config ARC_CACHE_PAGES + bool "Per Page Cache Control" + default y + depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE + help + This can be used to over-ride the global I/D Cache Enable on a + per-page basis (but only for pages accessed via MMU such as + Kernel Virtual address or User Virtual Address) + TLB entries have a per-page Cache Enable Bit. + Note that Global I/D ENABLE + Per Page DISABLE works but corollary + Global DISABLE + Per Page ENABLE won't work + +endif #ARC_CACHE + +config ARC_HAS_HW_MPY + bool "Use Hardware Multiplier (Normal or Faster XMAC)" + default y + help + Influences how gcc generates code for MPY operations. + If enabled, MPYxx insns are generated, provided by Standard/XMAC + Multipler. Otherwise software multipy lib is used + +choice + prompt "ARC700 MMU Version" + default ARC_MMU_V3 if ARC_CPU_770 + default ARC_MMU_V2 if ARC_CPU_750D + +config ARC_MMU_V1 + bool "MMU v1" + help + Orig ARC700 MMU + +config ARC_MMU_V2 + bool "MMU v2" + help + Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio + when 2 D-TLB and 1 I-TLB entries index into same 2way set. + +config ARC_MMU_V3 + bool "MMU v3" + depends on ARC_CPU_770 + help + Introduced with ARC700 4.10: New Features + Variable Page size (1k-16k), var JTLB size 128 x (2 or 4) + Shared Address Spaces (SASID) + +endchoice + + +choice + prompt "MMU Page Size" + default ARC_PAGE_SIZE_8K + +config ARC_PAGE_SIZE_8K + bool "8KB" + help + Choose between 8k vs 16k + +config ARC_PAGE_SIZE_16K + bool "16KB" + depends on ARC_MMU_V3 + +config ARC_PAGE_SIZE_4K + bool "4KB" + depends on ARC_MMU_V3 + +endchoice + +config ARC_FPU_SAVE_RESTORE + bool "Enable FPU state persistence across context switch" + default n + help + Double Precision Floating Point unit had dedictaed regs which + need to be saved/restored across context-switch. + Note that ARC FPU is overly simplistic, unlike say x86, which has + hardware pieces to allow software to conditionally save/restore, + based on actual usage of FPU by a task. Thus our implemn does + this for all tasks in system. + +menuconfig ARC_CPU_REL_4_10 + bool "Enable support for Rel 4.10 features" + default n + help + -ARC770 (and dependent features) enabled + -ARC750 also shares some of the new features with 770 + +config ARC_HAS_LLSC + bool "Insn: LLOCK/SCOND (efficient atomic ops)" + default y + depends on ARC_CPU_770 + # if SMP, enable LLSC ONLY if ARC implementation has coherent atomics + depends on !SMP || ARC_HAS_COH_LLSC + +config ARC_HAS_SWAPE + bool "Insn: SWAPE (endian-swap)" + default y + depends on ARC_CPU_REL_4_10 + +config ARC_HAS_RTSC + bool "Insn: RTSC (64-bit r/o cycle counter)" + default y + depends on ARC_CPU_REL_4_10 + +endmenu # "ARC CPU Configuration" + +menu "Platform Board Configuration" + +source "arch/arc/plat-arcfpga/Kconfig" + +#New platform adds here + +config ARC_PLAT_CLK + int "Clk speed in Hz" + default "80000000" + +config LINUX_LINK_BASE + hex "Linux Link Address" + default "0x80000000" + help + ARC700 divides the 32 bit phy address space into two equal halves + -Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU + -Upper 2G (0x8000_0000 onwards) is untranslated, for kernel + Typically Linux kernel is linked at the start of untransalted addr, + hence the default value of 0x8zs. + However some customers have peripherals mapped at this addr, so + Linux needs to be scooted a bit. + If you don't know what the above means, leave this setting alone. + +config ARC_PLAT_SDRAM_SIZE + hex "SD RAM Size" + default "0x10000000" + help + Implies the amount of SDRAM/DRAM Linux is going to claim/own. + The actual memory itself could be larger than this number. But for + all software purposes, this is the amt of memory. + +endmenu # "Platform Board Configuration" + +config ARC_STACK_NONEXEC + bool "Make stack non-executable" + default n + help + To disable the execute permissions of stack/heap of processes + which are enabled by default. + +config HZ + int "Timer Frequency" + default 100 + +menuconfig ARC_DBG + bool "ARC debugging" + default y + +config ARC_DBG_TLB_PARANOIA + bool "Paranoia Checks in Low Level TLB Handlers" + depends on ARC_DBG + default n + +config ARC_DBG_TLB_MISS_COUNT + bool "Profile TLB Misses" + default n + select DEBUG_FS + depends on ARC_DBG + help + Counts number of I and D TLB Misses and exports them via Debugfs + The counters can be cleared via Debugfs as well + +config CMDLINE + string "Kernel command line to built-in" + default "print-fatal-signals=1" + help + The default command line which will be appended to the optional + u-boot provided command line (see below) + +config CMDLINE_UBOOT + bool "Support U-boot kernel command line passing" + default n + help + If you are using U-boot (www.denx.de) and wish to pass the kernel + command line from the U-boot environment to the Linux kernel then + switch this option on. + ARC U-boot will setup the cmdline in RAM/flash and set r2 to point + to it. kernel startup code will copy the string into cmdline buffer + and also append CONFIG_CMDLINE. + +source "kernel/Kconfig.preempt" + +endmenu # "ARC Architecture Configuration" + +source "mm/Kconfig" +source "net/Kconfig" +source "drivers/Kconfig" +source "fs/Kconfig" +source "arch/arc/Kconfig.debug" +source "security/Kconfig" +source "crypto/Kconfig" +source "lib/Kconfig" diff --git a/arch/arc/Kconfig.debug b/arch/arc/Kconfig.debug new file mode 100644 index 000000000000..962c6099659e --- /dev/null +++ b/arch/arc/Kconfig.debug @@ -0,0 +1,34 @@ +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +config EARLY_PRINTK + bool "Early printk" if EMBEDDED + default y + help + Write kernel log output directly into the VGA buffer or to a serial + port. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation + it is not recommended because it looks ugly and doesn't cooperate + with klogd/syslogd or the X server. You should normally N here, + unless you want to debug such a crash. + +config DEBUG_STACKOVERFLOW + bool "Check for stack overflows" + depends on DEBUG_KERNEL + help + This option will cause messages to be printed if free stack space + drops below a certain limit. + +config 16KSTACKS + bool "Use 16Kb for kernel stacks instead of 8Kb" + help + If you say Y here the kernel will use a 16Kb stacksize for the + kernel stack attached to each process/thread. The default is 8K. + This increases the resident kernel footprint and will cause less + threads to run on the system and also increase the pressure + on the VM subsystem for higher order allocations. + +endmenu diff --git a/arch/arc/Makefile b/arch/arc/Makefile new file mode 100644 index 000000000000..4d52a3bb68a0 --- /dev/null +++ b/arch/arc/Makefile @@ -0,0 +1,115 @@ +# +# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# + +UTS_MACHINE := arc + +KBUILD_DEFCONFIG := fpga_defconfig + +# For ARC FPGA Platforms +platform-$(CONFIG_ARC_PLAT_FPGA_LEGACY) := arcfpga +#New platform adds here + +PLATFORM := $(platform-y) +export PLATFORM + +cflags-y += -Iarch/arc/plat-$(PLATFORM)/include +cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__ + +atleast_gcc44 := $(call cc-ifversion, -gt, 0402, y) +cflags-$(atleast_gcc44) += -fsection-anchors + +cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock +cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape +cflags-$(CONFIG_ARC_HAS_RTSC) += -mrtsc +cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables + +ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE +# Generic build system uses -O2, we want -O3 +cflags-y += -O3 +endif + +# small data is default for elf32 tool-chain. If not usable, disable it +# This also allows repurposing GP as scratch reg to gcc reg allocator +disable_small_data := y +cflags-$(disable_small_data) += -mno-sdata -fcall-used-gp + +cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mbig-endian +ldflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB + +# STAR 9000518362: +# arc-linux-uclibc-ld (buildroot) or arceb-elf32-ld (EZChip) don't accept +# --build-id w/o "-marclinux". +# Default arc-elf32-ld is OK +ldflags-y += -marclinux + +ARC_LIBGCC := -mA7 +cflags-$(CONFIG_ARC_HAS_HW_MPY) += -multcost=16 + +ifndef CONFIG_ARC_HAS_HW_MPY + cflags-y += -mno-mpy + +# newlib for ARC700 assumes MPY to be always present, which is generally true +# However, if someone really doesn't want MPY, we need to use the 600 ver +# which coupled with -mno-mpy will use mpy emulation +# With gcc 4.4.7, -mno-mpy is enough to make any other related adjustments, +# e.g. increased cost of MPY. With gcc 4.2.1 this had to be explicitly hinted + + ARC_LIBGCC := -marc600 + ifneq ($(atleast_gcc44),y) + cflags-y += -multcost=30 + endif +endif + +LIBGCC := $(shell $(CC) $(ARC_LIBGCC) $(cflags-y) --print-libgcc-file-name) + +# Modules with short calls might break for calls into builtin-kernel +KBUILD_CFLAGS_MODULE += -mlong-calls + +# Finally dump eveything into kernel build system +KBUILD_CFLAGS += $(cflags-y) +KBUILD_AFLAGS += $(KBUILD_CFLAGS) +LDFLAGS += $(ldflags-y) + +# Needed for Linker script preprocessing +KBUILD_CPPFLAGS += -Iarch/arc/plat-$(PLATFORM)/include + +head-y := arch/arc/kernel/head.o + +# See arch/arc/Kbuild for content of core part of the kernel +core-y += arch/arc/ + +# w/o this ifneq, make ARCH=arc clean was crapping out +ifneq ($(platform-y),) +core-y += arch/arc/plat-$(PLATFORM)/ +endif + +libs-y += arch/arc/lib/ $(LIBGCC) + +#default target for make without any arguements. +KBUILD_IMAGE := bootpImage + +all: $(KBUILD_IMAGE) +boot := arch/arc/boot + +bootpImage: vmlinux + +uImage: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +archclean: + $(Q)$(MAKE) $(clean)=$(boot) + +# Hacks to enable final link due to absence of link-time branch relexation +# and gcc choosing optimal(shorter) branches at -O3 +# +# vineetg Feb 2010: -mlong-calls switched off for overall kernel build +# However lib/decompress_inflate.o (.init.text) calls +# zlib_inflate_workspacesize (.text) causing relocation errors. +# Thus forcing all exten calls in this file to be long calls +export CFLAGS_decompress_inflate.o = -mmedium-calls +export CFLAGS_initramfs.o = -mmedium-calls diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile new file mode 100644 index 000000000000..7d514c24e095 --- /dev/null +++ b/arch/arc/boot/Makefile @@ -0,0 +1,26 @@ +targets := vmlinux.bin vmlinux.bin.gz uImage + +# uImage build relies on mkimage being availble on your host for ARC target +# You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage +# and make sure it's reacable from your PATH +MKIMAGE := $(srctree)/scripts/mkuboot.sh + +OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S + +LINUX_START_TEXT = $$(readelf -h vmlinux | \ + grep "Entry point address" | grep -o 0x.*) + +UIMAGE_LOADADDR = $(CONFIG_LINUX_LINK_BASE) +UIMAGE_ENTRYADDR = $(LINUX_START_TEXT) +UIMAGE_COMPRESSION = gzip + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,uimage) + +PHONY += FORCE diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild index a90a3c6c97e4..105ec1188aaf 100644 --- a/arch/arc/include/asm/Kbuild +++ b/arch/arc/include/asm/Kbuild @@ -33,6 +33,7 @@ generic-y += mman.h generic-y += msgbuf.h generic-y += param.h generic-y += parport.h +generic-y += pci.h generic-y += percpu.h generic-y += poll.h generic-y += posix_types.h diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile new file mode 100644 index 000000000000..6d834312f755 --- /dev/null +++ b/arch/arc/kernel/Makefile @@ -0,0 +1,16 @@ +# +# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. + +obj-y := arcksyms.o setup.o irq.o time.o reset.o ptrace.o entry.o process.o +obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o clk.o + +obj-$(CONFIG_ARC_FPU_SAVE_RESTORE) += fpu.o +CFLAGS_fpu.o += -mdpfp + +obj-y += ctx_sw_asm.o + +extra-y := vmlinux.lds head.o diff --git a/arch/arc/kernel/arcksyms.c b/arch/arc/kernel/arcksyms.c new file mode 100644 index 000000000000..4d9e77724bed --- /dev/null +++ b/arch/arc/kernel/arcksyms.c @@ -0,0 +1,56 @@ +/* + * arcksyms.c - Exporting symbols not exportable from their own sources + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + +/* libgcc functions, not part of kernel sources */ +extern void __ashldi3(void); +extern void __ashrdi3(void); +extern void __divsi3(void); +extern void __divsf3(void); +extern void __lshrdi3(void); +extern void __modsi3(void); +extern void __muldi3(void); +extern void __ucmpdi2(void); +extern void __udivsi3(void); +extern void __umodsi3(void); +extern void __cmpdi2(void); +extern void __fixunsdfsi(void); +extern void __muldf3(void); +extern void __divdf3(void); +extern void __floatunsidf(void); +extern void __floatunsisf(void); + +EXPORT_SYMBOL(__ashldi3); +EXPORT_SYMBOL(__ashrdi3); +EXPORT_SYMBOL(__divsi3); +EXPORT_SYMBOL(__divsf3); +EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(__modsi3); +EXPORT_SYMBOL(__muldi3); +EXPORT_SYMBOL(__ucmpdi2); +EXPORT_SYMBOL(__udivsi3); +EXPORT_SYMBOL(__umodsi3); +EXPORT_SYMBOL(__cmpdi2); +EXPORT_SYMBOL(__fixunsdfsi); +EXPORT_SYMBOL(__muldf3); +EXPORT_SYMBOL(__divdf3); +EXPORT_SYMBOL(__floatunsidf); +EXPORT_SYMBOL(__floatunsisf); + +/* ARC optimised assembler routines */ +EXPORT_SYMBOL(memset); +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(memcmp); +EXPORT_SYMBOL(strchr); +EXPORT_SYMBOL(strcpy); +EXPORT_SYMBOL(strcmp); +EXPORT_SYMBOL(strlen); diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c new file mode 100644 index 000000000000..64b2c2fa7b54 --- /dev/null +++ b/arch/arc/kernel/asm-offsets.c @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +int main(void) +{ + DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); + DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack)); + + BLANK(); + + DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); + DEFINE(THREAD_CALLEE_REG, offsetof(struct thread_struct, callee_reg)); + DEFINE(THREAD_FAULT_ADDR, + offsetof(struct thread_struct, fault_address)); + + BLANK(); + + DEFINE(THREAD_INFO_FLAGS, offsetof(struct thread_info, flags)); + DEFINE(THREAD_INFO_PREEMPT_COUNT, + offsetof(struct thread_info, preempt_count)); + + BLANK(); + + DEFINE(TASK_ACT_MM, offsetof(struct task_struct, active_mm)); + DEFINE(TASK_TGID, offsetof(struct task_struct, tgid)); + + DEFINE(MM_CTXT, offsetof(struct mm_struct, context)); + DEFINE(MM_PGD, offsetof(struct mm_struct, pgd)); + + DEFINE(MM_CTXT_ASID, offsetof(mm_context_t, asid)); + + BLANK(); + + DEFINE(PT_status32, offsetof(struct pt_regs, status32)); + DEFINE(PT_orig_r8, offsetof(struct pt_regs, orig_r8)); + DEFINE(PT_sp, offsetof(struct pt_regs, sp)); + DEFINE(PT_r0, offsetof(struct pt_regs, r0)); + DEFINE(PT_r1, offsetof(struct pt_regs, r1)); + DEFINE(PT_r2, offsetof(struct pt_regs, r2)); + DEFINE(PT_r3, offsetof(struct pt_regs, r3)); + DEFINE(PT_r4, offsetof(struct pt_regs, r4)); + DEFINE(PT_r5, offsetof(struct pt_regs, r5)); + DEFINE(PT_r6, offsetof(struct pt_regs, r6)); + DEFINE(PT_r7, offsetof(struct pt_regs, r7)); + + return 0; +} diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S new file mode 100644 index 000000000000..8c72bc37568b --- /dev/null +++ b/arch/arc/kernel/vmlinux.lds.S @@ -0,0 +1,116 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +OUTPUT_ARCH(arc) +ENTRY(_stext) + +#ifdef CONFIG_CPU_BIG_ENDIAN +jiffies = jiffies_64 + 4; +#else +jiffies = jiffies_64; +#endif + +SECTIONS +{ + . = CONFIG_LINUX_LINK_BASE; + + _int_vec_base_lds = .; + .vector : { + *(.vector) + . = ALIGN(PAGE_SIZE); + } + + /* + * The reason for having a seperate subsection .init.ramfs is to + * prevent objump from including it in kernel dumps + * + * Reason for having .init.ramfs above .init is to make sure that the + * binary blob is tucked away to one side, reducing the displacement + * between .init.text and .text, avoiding any possible relocation + * errors because of calls from .init.text to .text + * Yes such calls do exist. e.g. + * decompress_inflate.c:gunzip( ) -> zlib_inflate_workspace( ) + */ + + __init_begin = .; + + .init.ramfs : { INIT_RAM_FS } + + . = ALIGN(PAGE_SIZE); + _stext = .; + + HEAD_TEXT_SECTION + INIT_TEXT_SECTION(L1_CACHE_BYTES) + + /* INIT_DATA_SECTION open-coded: special INIT_RAM_FS handling */ + .init.data : { + INIT_DATA + INIT_SETUP(L1_CACHE_BYTES) + INIT_CALLS + CON_INITCALL + SECURITY_INITCALL + } + + PERCPU_SECTION(L1_CACHE_BYTES) + + /* + * .exit.text is discard at runtime, not link time, to deal with + * references from .debug_frame + * It will be init freed, being inside [__init_start : __init_end] + */ + .exit.text : { EXIT_TEXT } + .exit.data : { EXIT_DATA } + + . = ALIGN(PAGE_SIZE); + __init_end = .; + + .text : { + _text = .; + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + *(.fixup) + *(.gnu.warning) + } + EXCEPTION_TABLE(L1_CACHE_BYTES) + _etext = .; + + _sdata = .; + RO_DATA_SECTION(PAGE_SIZE) + + /* + * 1. this is .data essentially + * 2. THREAD_SIZE for init.task, must be kernel-stk sz aligned + */ + RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) + + _edata = .; + + BSS_SECTION(0, 0, 0) + + NOTES + + . = ALIGN(PAGE_SIZE); + _end = . ; + + STABS_DEBUG + DWARF_DEBUG + DISCARDS + + .arcextmap 0 : { + *(.gnu.linkonce.arcextmap.*) + *(.arcextmap.*) + } +} diff --git a/arch/arc/lib/Makefile b/arch/arc/lib/Makefile new file mode 100644 index 000000000000..db46e200baba --- /dev/null +++ b/arch/arc/lib/Makefile @@ -0,0 +1,9 @@ +# +# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. + +lib-y := strchr-700.o strcmp.o strcpy-700.o strlen.o +lib-y += memcmp.o memcpy-700.o memset.o diff --git a/arch/arc/mm/Makefile b/arch/arc/mm/Makefile new file mode 100644 index 000000000000..168dc146a8f6 --- /dev/null +++ b/arch/arc/mm/Makefile @@ -0,0 +1,10 @@ +# +# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# + +obj-y := extable.o ioremap.o dma.o fault.o init.o +obj-y += tlb.o tlbex.o cache_arc700.o diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig new file mode 100644 index 000000000000..7af3a4e7f7d2 --- /dev/null +++ b/arch/arc/plat-arcfpga/Kconfig @@ -0,0 +1,33 @@ +# +# Copyright (C) 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# + +if ARC_PLAT_FPGA_LEGACY + +choice + prompt "FPGA Board" + +config ARC_BOARD_ANGEL4 + bool "ARC Angel4" + help + ARC Angel4 FPGA Ref Platform (Xilinx Virtex Based) + +config ARC_BOARD_ML509 + bool "ML509" + help + ARC ML509 FPGA Ref Platform (Xilinx Virtex-5 Based) + +endchoice + +config ARC_SERIAL_BAUD + int "UART Baud rate" + default "115200" + depends on SERIAL_ARC || SERIAL_ARC_CONSOLE + help + Baud rate for the ARC UART + +endif diff --git a/arch/arc/plat-arcfpga/Makefile b/arch/arc/plat-arcfpga/Makefile new file mode 100644 index 000000000000..385eb9d83b63 --- /dev/null +++ b/arch/arc/plat-arcfpga/Makefile @@ -0,0 +1,9 @@ +# +# Copyright (C) 2011-2012 Synopsys, Inc. (www.synopsys.com) +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# + +obj-y := platform.o irq.o