hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

EDAC/i10nm: Retrieve and print retry_rd_err_log registers 

Retrieve and print retry_rd_err_log registers like the earlier change:
commit e80634a75a ("EDAC, skx: Retrieve and print retry_rd_err_log registers")

This is a little trickier than on Skylake because of potential
interference with BIOS use of the same registers. The default
behavior is to ignore these registers.

A module parameter retry_rd_err_log(default=0) controls the mode of operation:
- 0=off  : Default.
- 1=bios : Linux doesn't reset any control bits, but just reports values.
           This is "no harm" mode, but it may miss reporting some data.
- 2=linux: Linux tries to take control and resets mode bits,
           clears valid/UC bits after reading. This should be
           more reliable (especially if BIOS interference is reduced
           by disabling eMCA reporting mode in BIOS setup).

Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210818175701.1611513-3-tony.luck@intel.com
This commit is contained in:
Youquan Song 2021-08-18 10:57:01 -07:00 committed by Tony Luck
parent 2294a7299f
commit cf4e6d52f5
4 changed files with 157 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

146
drivers/edac/i10nm_base.c
View File

@ -42,6 +42,12 @@
#define I10NM_GET_AMAP(m, i) \
readl((m)->mbase + ((m)->hbm_mc ? 0x814 : 0x20814) + \
(i) * (m)->chan_mmio_sz)
#define I10NM_GET_REG32(m, i, offset) \
readl((m)->mbase + (i) * (m)->chan_mmio_sz + (offset))
#define I10NM_GET_REG64(m, i, offset) \
readq((m)->mbase + (i) * (m)->chan_mmio_sz + (offset))
#define I10NM_SET_REG32(m, i, offset, v) \
writel(v, (m)->mbase + (i) * (m)->chan_mmio_sz + (offset))
#define I10NM_GET_SCK_MMIO_BASE(reg) (GET_BITFIELD(reg, 0, 28) << 23)
#define I10NM_GET_IMC_MMIO_OFFSET(reg) (GET_BITFIELD(reg, 0, 10) << 12)
@ -58,8 +64,125 @@
#define I10NM_SAD_ENABLE(reg) GET_BITFIELD(reg, 0, 0)
#define I10NM_SAD_NM_CACHEABLE(reg) GET_BITFIELD(reg, 5, 5)
#define RETRY_RD_ERR_LOG_UC BIT(1)
#define RETRY_RD_ERR_LOG_NOOVER BIT(14)
#define RETRY_RD_ERR_LOG_EN BIT(15)
#define RETRY_RD_ERR_LOG_NOOVER_UC (BIT(14) | BIT(1))
#define RETRY_RD_ERR_LOG_OVER_UC_V (BIT(2) | BIT(1) | BIT(0))
static struct list_head *i10nm_edac_list;
static struct res_config *res_cfg;
static int retry_rd_err_log;
static u32 offsets_scrub_icx[] = {0x22c60, 0x22c54, 0x22c5c, 0x22c58, 0x22c28, 0x20ed8};
static u32 offsets_scrub_spr[] = {0x22c60, 0x22c54, 0x22f08, 0x22c58, 0x22c28, 0x20ed8};
static u32 offsets_demand_icx[] = {0x22e54, 0x22e60, 0x22e64, 0x22e58, 0x22e5c, 0x20ee0};
static u32 offsets_demand_spr[] = {0x22e54, 0x22e60, 0x22f10, 0x22e58, 0x22e5c, 0x20ee0};
static void __enable_retry_rd_err_log(struct skx_imc *imc, int chan, bool enable)
{
u32 s, d;
if (!imc->mbase)
return;
s = I10NM_GET_REG32(imc, chan, res_cfg->offsets_scrub[0]);
d = I10NM_GET_REG32(imc, chan, res_cfg->offsets_demand[0]);
if (enable) {
/* Save default configurations */
imc->chan[chan].retry_rd_err_log_s = s;
imc->chan[chan].retry_rd_err_log_d = d;
s &= ~RETRY_RD_ERR_LOG_NOOVER_UC;
s |= RETRY_RD_ERR_LOG_EN;
d &= ~RETRY_RD_ERR_LOG_NOOVER_UC;
d |= RETRY_RD_ERR_LOG_EN;
} else {
/* Restore default configurations */
if (imc->chan[chan].retry_rd_err_log_s & RETRY_RD_ERR_LOG_UC)
s |= RETRY_RD_ERR_LOG_UC;
if (imc->chan[chan].retry_rd_err_log_s & RETRY_RD_ERR_LOG_NOOVER)
s |= RETRY_RD_ERR_LOG_NOOVER;
if (!(imc->chan[chan].retry_rd_err_log_s & RETRY_RD_ERR_LOG_EN))
s &= ~RETRY_RD_ERR_LOG_EN;
if (imc->chan[chan].retry_rd_err_log_d & RETRY_RD_ERR_LOG_UC)
d |= RETRY_RD_ERR_LOG_UC;
if (imc->chan[chan].retry_rd_err_log_d & RETRY_RD_ERR_LOG_NOOVER)
d |= RETRY_RD_ERR_LOG_NOOVER;
if (!(imc->chan[chan].retry_rd_err_log_d & RETRY_RD_ERR_LOG_EN))
d &= ~RETRY_RD_ERR_LOG_EN;
}
I10NM_SET_REG32(imc, chan, res_cfg->offsets_scrub[0], s);
I10NM_SET_REG32(imc, chan, res_cfg->offsets_demand[0], d);
}
static void enable_retry_rd_err_log(bool enable)
{
struct skx_dev *d;
int i, j;
edac_dbg(2, "\n");
list_for_each_entry(d, i10nm_edac_list, list)
for (i = 0; i < I10NM_NUM_IMC; i++)
for (j = 0; j < I10NM_NUM_CHANNELS; j++)
__enable_retry_rd_err_log(&d->imc[i], j, enable);
}
static void show_retry_rd_err_log(struct decoded_addr *res, char *msg,
int len, bool scrub_err)
{
struct skx_imc *imc = &res->dev->imc[res->imc];
u32 log0, log1, log2, log3, log4;
u32 corr0, corr1, corr2, corr3;
u64 log2a, log5;
u32 *offsets;
int n;
if (!imc->mbase)
return;
offsets = scrub_err ? res_cfg->offsets_scrub : res_cfg->offsets_demand;
log0 = I10NM_GET_REG32(imc, res->channel, offsets[0]);
log1 = I10NM_GET_REG32(imc, res->channel, offsets[1]);
log3 = I10NM_GET_REG32(imc, res->channel, offsets[3]);
log4 = I10NM_GET_REG32(imc, res->channel, offsets[4]);
log5 = I10NM_GET_REG64(imc, res->channel, offsets[5]);
if (res_cfg->type == SPR) {
log2a = I10NM_GET_REG64(imc, res->channel, offsets[2]);
n = snprintf(msg, len, " retry_rd_err_log[%.8x %.8x %.16llx %.8x %.8x %.16llx]",
log0, log1, log2a, log3, log4, log5);
} else {
log2 = I10NM_GET_REG32(imc, res->channel, offsets[2]);
n = snprintf(msg, len, " retry_rd_err_log[%.8x %.8x %.8x %.8x %.8x %.16llx]",
log0, log1, log2, log3, log4, log5);
}
corr0 = I10NM_GET_REG32(imc, res->channel, 0x22c18);
corr1 = I10NM_GET_REG32(imc, res->channel, 0x22c1c);
corr2 = I10NM_GET_REG32(imc, res->channel, 0x22c20);
corr3 = I10NM_GET_REG32(imc, res->channel, 0x22c24);
if (len - n > 0)
snprintf(msg + n, len - n,
" correrrcnt[%.4x %.4x %.4x %.4x %.4x %.4x %.4x %.4x]",
corr0 & 0xffff, corr0 >> 16,
corr1 & 0xffff, corr1 >> 16,
corr2 & 0xffff, corr2 >> 16,
corr3 & 0xffff, corr3 >> 16);
/* Clear status bits */
if (retry_rd_err_log == 2 && (log0 & RETRY_RD_ERR_LOG_OVER_UC_V)) {
log0 &= ~RETRY_RD_ERR_LOG_OVER_UC_V;
I10NM_SET_REG32(imc, res->channel, offsets[0], log0);
}
}
static struct pci_dev *pci_get_dev_wrapper(int dom, unsigned int bus,
unsigned int dev, unsigned int fun)
{
@ -263,6 +386,8 @@ static struct res_config i10nm_cfg0 = {
.ddr_chan_mmio_sz = 0x4000,
.sad_all_devfn = PCI_DEVFN(29, 0),
.sad_all_offset = 0x108,
.offsets_scrub = offsets_scrub_icx,
.offsets_demand = offsets_demand_icx,
};
static struct res_config i10nm_cfg1 = {
@ -272,6 +397,8 @@ static struct res_config i10nm_cfg1 = {
.ddr_chan_mmio_sz = 0x4000,
.sad_all_devfn = PCI_DEVFN(29, 0),
.sad_all_offset = 0x108,
.offsets_scrub = offsets_scrub_icx,
.offsets_demand = offsets_demand_icx,
};
static struct res_config spr_cfg = {
@ -283,6 +410,8 @@ static struct res_config spr_cfg = {
.support_ddr5 = true,
.sad_all_devfn = PCI_DEVFN(10, 0),
.sad_all_offset = 0x300,
.offsets_scrub = offsets_scrub_spr,
.offsets_demand = offsets_demand_spr,
};
static const struct x86_cpu_id i10nm_cpuids[] = {
@ -422,6 +551,7 @@ static int __init i10nm_init(void)
return -ENODEV;
cfg = (struct res_config *)id->driver_data;
res_cfg = cfg;
rc = skx_get_hi_lo(0x09a2, off, &tolm, &tohm);
if (rc)
@ -486,6 +616,12 @@ static int __init i10nm_init(void)
mce_register_decode_chain(&i10nm_mce_dec);
setup_i10nm_debug();
if (retry_rd_err_log && res_cfg->offsets_scrub && res_cfg->offsets_demand) {
skx_set_decode(NULL, show_retry_rd_err_log);
if (retry_rd_err_log == 2)
enable_retry_rd_err_log(true);
}
i10nm_printk(KERN_INFO, "%s\n", I10NM_REVISION);
return 0;
@ -497,6 +633,13 @@ fail:
static void __exit i10nm_exit(void)
{
edac_dbg(2, "\n");
if (retry_rd_err_log && res_cfg->offsets_scrub && res_cfg->offsets_demand) {
skx_set_decode(NULL, NULL);
if (retry_rd_err_log == 2)
enable_retry_rd_err_log(false);
}
teardown_i10nm_debug();
mce_unregister_decode_chain(&i10nm_mce_dec);
skx_adxl_put();
@ -506,5 +649,8 @@ static void __exit i10nm_exit(void)
module_init(i10nm_init);
module_exit(i10nm_exit);
module_param(retry_rd_err_log, int, 0444);
MODULE_PARM_DESC(retry_rd_err_log, "retry_rd_err_log: 0=off(default), 1=bios(Linux doesn't reset any control bits, but just reports values.), 2=linux(Linux tries to take control and resets mode bits, clear valid/UC bits after reading.)");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MC Driver for Intel 10nm server processors");

3
drivers/edac/skx_base.c
View File

@ -230,7 +230,8 @@ static int skx_get_dimm_config(struct mem_ctl_info *mci, struct res_config *cfg)
#define SKX_ILV_TARGET(tgt) ((tgt) & 7)
static void skx_show_retry_rd_err_log(struct decoded_addr *res,
char *msg, int len)
char *msg, int len,
bool scrub_err)
{
u32 log0, log1, log2, log3, log4;
u32 corr0, corr1, corr2, corr3;

4
drivers/edac/skx_common.c
View File

@ -532,6 +532,7 @@ static void skx_mce_output_error(struct mem_ctl_info *mci,
bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
bool overflow = GET_BITFIELD(m->status, 62, 62);
bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
bool scrub_err = false;
bool recoverable;
int len;
u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
@ -583,6 +584,7 @@ static void skx_mce_output_error(struct mem_ctl_info *mci,
break;
case 4:
optype = "memory scrubbing error";
scrub_err = true;
break;
default:
optype = "reserved";
@ -605,7 +607,7 @@ static void skx_mce_output_error(struct mem_ctl_info *mci,
}
if (skx_show_retry_rd_err_log)
skx_show_retry_rd_err_log(res, skx_msg + len, MSG_SIZE - len);
skx_show_retry_rd_err_log(res, skx_msg + len, MSG_SIZE - len, scrub_err);
edac_dbg(0, "%s\n", skx_msg);

7
drivers/edac/skx_common.h
View File

@ -80,6 +80,8 @@ struct skx_dev {
struct skx_channel {
struct pci_dev *cdev;
struct pci_dev *edev;
u32 retry_rd_err_log_s;
u32 retry_rd_err_log_d;
struct skx_dimm {
u8 close_pg;
u8 bank_xor_enable;
@ -150,12 +152,15 @@ struct res_config {
/* SAD device number and function number */
unsigned int sad_all_devfn;
int sad_all_offset;
/* Offsets of retry_rd_err_log registers */
u32 *offsets_scrub;
u32 *offsets_demand;
};
typedef int (*get_dimm_config_f)(struct mem_ctl_info *mci,
struct res_config *cfg);
typedef bool (*skx_decode_f)(struct decoded_addr *res);
typedef void (*skx_show_retry_log_f)(struct decoded_addr *res, char *msg, int len);
typedef void (*skx_show_retry_log_f)(struct decoded_addr *res, char *msg, int len, bool scrub_err);
int __init skx_adxl_get(void);
void __exit skx_adxl_put(void);