usb: musb: split am35x to its own platform_driver

Just adding its own platform_driver, not really
using it yet.

When all HW glue layers are converted, more patches
will come to split power management code from musb_core
and move it completely to HW glue layer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Felipe Balbi 2010-12-02 09:06:51 +02:00
parent dc09886bfa
commit ce40c5767a
3 changed files with 86 additions and 1 deletions

View File

@ -93,6 +93,7 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)
if (cpu_is_omap243x()) {
musb_resources[0].start = OMAP243X_HS_BASE;
} else if (cpu_is_omap3517() || cpu_is_omap3505()) {
musb_device.name = "musb-am35x";
musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
musb_resources[1].start = INT_35XX_USBOTG_IRQ;
} else if (cpu_is_omap34xx()) {

View File

@ -17,10 +17,10 @@ musb_hdrc-$(CONFIG_DEBUG_FS) += musb_debugfs.o
musb_hdrc-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o
musb_hdrc-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
musb_hdrc-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o
musb_hdrc-$(CONFIG_USB_MUSB_AM35X) += am35x.o
musb_hdrc-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o
obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o
# the kconfig must guarantee that only one of the
# possible I/O schemes will be enabled at a time ...

View File

@ -29,6 +29,8 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <plat/control.h>
#include <plat/usb.h>
@ -535,3 +537,85 @@ const struct musb_platform_ops musb_ops = {
.set_vbus = am35x_musb_set_vbus,
};
static u64 am35x_dmamask = DMA_BIT_MASK(32);
static int __init am35x_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
int ret = -ENOMEM;
musb = platform_device_alloc("musb-hdrc", -1);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err0;
}
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &am35x_dmamask;
musb->dev.coherent_dma_mask = am35x_dmamask;
platform_set_drvdata(pdev, musb);
ret = platform_device_add_resources(musb, pdev->resource,
pdev->num_resources);
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
goto err1;
}
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
if (ret) {
dev_err(&pdev->dev, "failed to add platform_data\n");
goto err1;
}
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
goto err1;
}
return 0;
err1:
platform_device_put(musb);
err0:
return ret;
}
static int __exit am35x_remove(struct platform_device *pdev)
{
struct platform_device *musb = platform_get_drvdata(pdev);
platform_device_del(musb);
platform_device_put(musb);
return 0;
}
static struct platform_driver am35x_driver = {
.remove = __exit_p(am35x_remove),
.driver = {
.name = "musb-am35x",
},
};
MODULE_DESCRIPTION("AM35x MUSB Glue Layer");
MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
MODULE_LICENSE("GPL v2");
static int __init am35x_init(void)
{
return platform_driver_probe(&am35x_driver, am35x_probe);
}
subsys_initcall(am35x_init);
static void __exit am35x_exit(void)
{
platform_driver_unregister(&am35x_driver);
}
module_exit(am35x_exit);