hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'fixes' into next/fixes-non-critical 

Merge a set of fixes that we missed sending in before v4.0 release. These
will also be sent to -stable.

* fixes: (659 commits)
  ARM: at91/dt: sama5d3 xplained: add phy address for macb1
  kbuild: Create directory for target DTB
  ARM: mvebu: Disable CPU Idle on Armada 38x
  arm64: juno: Fix misleading name of UART reference clock
  ARM: dts: sunxi: Remove overclocked/overvoltaged OPP
  ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting
  ARM: socfpga: dts: fix spi1 interrupt
  ARM: dts: Fix gpio interrupts for dm816x
  ARM: dts: dra7: remove ti,hwmod property from pcie phy
  ARM: EXYNOS: Fix build breakage cpuidle on !SMP
  ARM: OMAP: dmtimer: disable pm runtime on remove
  ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
  ARM: dts: fix lid and power pin-functions for exynos5250-spring
  ARM: dts: fix mmc node updates for exynos5250-spring
  ARM: OMAP2+: Fix socbus family info for AM33xx devices
  ARM: dts: omap3: Add missing dmas for crypto
  + Linux 4.0-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2015-04-20 07:59:04 -07:00
parent 30a5c1894a 98b80987c9
commit cdaa8cf348
603 changed files with 6612 additions and 3578 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
Documentation/CodeOfConflict Normal file
View File

@ -0,0 +1,27 @@
Code of Conflict
----------------
The Linux kernel development effort is a very personal process compared
to "traditional" ways of developing software. Your code and ideas
behind it will be carefully reviewed, often resulting in critique and
criticism. The review will almost always require improvements to the
code before it can be included in the kernel. Know that this happens
because everyone involved wants to see the best possible solution for
the overall success of Linux. This development process has been proven
to create the most robust operating system kernel ever, and we do not
want to do anything to cause the quality of submission and eventual
result to ever decrease.
If however, anyone feels personally abused, threatened, or otherwise
uncomfortable due to this process, that is not acceptable. If so,
please contact the Linux Foundation's Technical Advisory Board at
<tab@lists.linux-foundation.org>, or the individual members, and they
will work to resolve the issue to the best of their ability. For more
information on who is on the Technical Advisory Board and what their
role is, please see:
http://www.linuxfoundation.org/programs/advisory-councils/tab
As a reviewer of code, please strive to keep things civil and focused on
the technical issues involved. We are all humans, and frustrations can
be high on both sides of the process. Try to keep in mind the immortal
words of Bill and Ted, "Be excellent to each other."

2
Documentation/devicetree/bindings/arm/exynos/power_domain.txt
View File

@ -22,6 +22,8 @@ Optional Properties:
- pclkN, clkN: Pairs of parent of input clock and input clock to the
devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
are supported currently.
- power-domains: phandle pointing to the parent power domain, for more details
see Documentation/devicetree/bindings/power/power_domain.txt
Node of a device using power domains must have a power-domains property
defined with a phandle to respective power domain.

4
Documentation/devicetree/bindings/arm/sti.txt
View File

@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties:
Required root node property:
compatible = "st,stih407";
Boards with the ST STiH410 SoC shall have the following properties:
Required root node property:
compatible = "st,stih410";
Boards with the ST STiH418 SoC shall have the following properties:
Required root node property:
compatible = "st,stih418";

1
Documentation/devicetree/bindings/i2c/i2c-imx.txt
View File

@ -7,6 +7,7 @@ Required properties:
- "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC
- reg : Should contain I2C/HS-I2C registers location and length
- interrupts : Should contain I2C/HS-I2C interrupt
- clocks : Should contain the I2C/HS-I2C clock specifier
Optional properties:
- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.

4
Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
View File

@ -27,6 +27,8 @@ property is used.
- amd,serdes-cdr-rate: CDR rate speed selection
- amd,serdes-pq-skew: PQ (data sampling) skew
- amd,serdes-tx-amp: TX amplitude boost
- amd,serdes-dfe-tap-config: DFE taps available to run
- amd,serdes-dfe-tap-enable: DFE taps to enable
Example:
xgbe_phy@e1240800 {
@ -41,4 +43,6 @@ Example:
amd,serdes-cdr-rate = <2>, <2>, <7>;
amd,serdes-pq-skew = <10>, <10>, <30>;
amd,serdes-tx-amp = <15>, <15>, <10>;
amd,serdes-dfe-tap-config = <3>, <3>, <1>;
amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
};

5
Documentation/devicetree/bindings/net/apm-xgene-enet.txt
View File

@ -4,7 +4,10 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in
APM X-Gene SoC.
Required properties for all the ethernet interfaces:
- compatible: Should be "apm,xgene-enet"
- compatible: Should state binding information from the following list,
- "apm,xgene-enet": RGMII based 1G interface
- "apm,xgene1-sgenet": SGMII based 1G interface
- "apm,xgene1-xgenet": XFI based 10G interface
- reg: Address and length of the register set for the device. It contains the
information of registers in the same order as described by reg-names
- reg-names: Should contain the register set names

29
Documentation/devicetree/bindings/power/power_domain.txt
View File

@ -19,6 +19,16 @@ Required properties:
providing multiple PM domains (e.g. power controllers), but can be any value
as specified by device tree binding documentation of particular provider.
Optional properties:
- power-domains : A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle.
Some power domains might be powered from another power domain (or have
other hardware specific dependencies). For representing such dependency
a standard PM domain consumer binding is used. When provided, all domains
created by the given provider should be subdomains of the domain
specified by this binding. More details about power domain specifier are
available in the next section.
Example:
power: power-controller@12340000 {
@ -30,6 +40,25 @@ Example:
The node above defines a power controller that is a PM domain provider and
expects one cell as its phandle argument.
Example 2:
parent: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12340000 0x1000>;
#power-domain-cells = <1>;
};
child: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12341000 0x1000>;
power-domains = <&parent 0>;
#power-domain-cells = <1>;
};
The nodes above define two power controllers: 'parent' and 'child'.
Domains created by the 'child' power controller are subdomains of '0' power
domain provided by the 'parent' power controller.
==PM domain consumers==
Required properties:

0
Documentation/devicetree/bindings/serial/of-serial.txt → Documentation/devicetree/bindings/serial/8250.txt
View File

19
Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt Normal file
View File

@ -0,0 +1,19 @@
ETRAX FS UART
Required properties:
- compatible : "axis,etraxfs-uart"
- reg: offset and length of the register set for the device.
- interrupts: device interrupt
Optional properties:
- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
line respectively.
Example:
serial@b00260000 {
compatible = "axis,etraxfs-uart";
reg = <0xb0026000 0x1000>;
interrupts = <68>;
status = "disabled";
};

16
Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
View File

@ -21,6 +21,18 @@ Optional properties:
- reg-io-width : the size (in bytes) of the IO accesses that should be
performed on the device. If this property is not present then single byte
accesses are used.
- dcd-override : Override the DCD modem status signal. This signal will always
be reported as active instead of being obtained from the modem status
register. Define this if your serial port does not use this pin.
- dsr-override : Override the DTS modem status signal. This signal will always
be reported as active instead of being obtained from the modem status
register. Define this if your serial port does not use this pin.
- cts-override : Override the CTS modem status signal. This signal will always
be reported as active instead of being obtained from the modem status
register. Define this if your serial port does not use this pin.
- ri-override : Override the RI modem status signal. This signal will always be
reported as inactive instead of being obtained from the modem status register.
Define this if your serial port does not use this pin.
Example:
@ -31,6 +43,10 @@ Example:
interrupts = <10>;
reg-shift = <2>;
reg-io-width = <4>;
dcd-override;
dsr-override;
cts-override;
ri-override;
};
Example with one clock:

3
Documentation/devicetree/bindings/submitting-patches.txt
View File

@ -12,6 +12,9 @@ I. For patch submitters
devicetree@vger.kernel.org
and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
all of the DT maintainers.
3) The Documentation/ portion of the patch should come in the series before
the code implementing the binding.

2
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -20,6 +20,7 @@ amlogic Amlogic, Inc.
ams AMS AG
amstaos AMS-Taos Inc.
apm Applied Micro Circuits Corporation (APM)
arasan Arasan Chip Systems
arm ARM Ltd.
armadeus ARMadeus Systems SARL
asahi-kasei Asahi Kasei Corp.
@ -27,6 +28,7 @@ atmel Atmel Corporation
auo AU Optronics Corporation
avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
axis Axis Communications AB
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
buffalo Buffalo, Inc.

5
Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
View File

@ -26,6 +26,11 @@ Optional properties:
- atmel,disable : Should be present if you want to disable the watchdog.
- atmel,idle-halt : Should be present if you want to stop the watchdog when
entering idle state.
CAUTION: This property should be used with care, it actually makes the
watchdog not counting when the CPU is in idle state, therefore the
watchdog reset time depends on mean CPU usage and will not reset at all
if the CPU stop working while it is in idle state, which is probably
not what you want.
- atmel,dbg-halt : Should be present if you want to stop the watchdog when
entering debug state.

22
Documentation/power/suspend-and-interrupts.txt
View File

@ -40,8 +40,10 @@ but also to IPIs and to some other special-purpose interrupts.
The IRQF_NO_SUSPEND flag is used to indicate that to the IRQ subsystem when
requesting a special-purpose interrupt. It causes suspend_device_irqs() to
leave the corresponding IRQ enabled so as to allow the interrupt to work all
the time as expected.
leave the corresponding IRQ enabled so as to allow the interrupt to work as
expected during the suspend-resume cycle, but does not guarantee that the
interrupt will wake the system from a suspended state -- for such cases it is
necessary to use enable_irq_wake().
Note that the IRQF_NO_SUSPEND flag affects the entire IRQ and not just one
user of it. Thus, if the IRQ is shared, all of the interrupt handlers installed
@ -110,8 +112,9 @@ any special interrupt handling logic for it to work.
IRQF_NO_SUSPEND and enable_irq_wake()
-------------------------------------
There are no valid reasons to use both enable_irq_wake() and the IRQF_NO_SUSPEND
flag on the same IRQ.
There are very few valid reasons to use both enable_irq_wake() and the
IRQF_NO_SUSPEND flag on the same IRQ, and it is never valid to use both for the
same device.
First of all, if the IRQ is not shared, the rules for handling IRQF_NO_SUSPEND
interrupts (interrupt handlers are invoked after suspend_device_irqs()) are
@ -120,4 +123,13 @@ handlers are not invoked after suspend_device_irqs()).
Second, both enable_irq_wake() and IRQF_NO_SUSPEND apply to entire IRQs and not
to individual interrupt handlers, so sharing an IRQ between a system wakeup
interrupt source and an IRQF_NO_SUSPEND interrupt source does not make sense.
interrupt source and an IRQF_NO_SUSPEND interrupt source does not generally
make sense.
In rare cases an IRQ can be shared between a wakeup device driver and an
IRQF_NO_SUSPEND user. In order for this to be safe, the wakeup device driver
must be able to discern spurious IRQs from genuine wakeup events (signalling
the latter to the core with pm_system_wakeup()), must use enable_irq_wake() to
ensure that the IRQ will function as a wakeup source, and must request the IRQ
with IRQF_COND_SUSPEND to tell the core that it meets these requirements. If
these requirements are not met, it is not valid to use IRQF_COND_SUSPEND.

28
MAINTAINERS
View File

@ -1030,6 +1030,16 @@ F: arch/arm/mach-mxs/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE VYBRID ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
M: Sascha Hauer <kernel@pengutronix.de>
R: Stefan Agner <stefan@agner.ch>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
F: arch/arm/mach-imx/*vf610*
F: arch/arm/boot/dts/vf*
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1188,6 +1198,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
M: Gregory Clement <gregory.clement@free-electrons.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-dove/
@ -1351,6 +1362,7 @@ F: drivers/i2c/busses/i2c-rk3x.c
F: drivers/*/*rockchip*
F: drivers/*/*/*rockchip*
F: sound/soc/rockchip/
N: rockchip
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene@kernel.org>
@ -2065,7 +2077,7 @@ F: include/net/bluetooth/
BONDING DRIVER
M: Jay Vosburgh <j.vosburgh@gmail.com>
M: Veaceslav Falico <vfalico@gmail.com>
M: Andy Gospodarek <andy@greyhouse.net>
M: Andy Gospodarek <gospo@cumulusnetworks.com>
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/bonding/
S: Supported
@ -2107,7 +2119,6 @@ F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
M: Christian Daudt <bcm@fixthebug.org>
M: Matt Porter <mporter@linaro.org>
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/mach-bcm
@ -2369,8 +2380,9 @@ F: arch/x86/include/asm/tce.h
CAN NETWORK LAYER
M: Oliver Hartkopp <socketcan@hartkopp.net>
M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
W: https://github.com/linux-can
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
@ -2386,7 +2398,7 @@ CAN NETWORK DRIVERS
M: Wolfgang Grandegger <wg@grandegger.com>
M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
W: https://github.com/linux-can
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
@ -8482,6 +8494,14 @@ S: Supported
L: netdev@vger.kernel.org
F: drivers/net/ethernet/samsung/sxgbe/
SAMSUNG THERMAL DRIVER
M: Lukasz Majewski <l.majewski@samsung.com>
L: linux-pm@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Supported
T: https://github.com/lmajewski/linux-samsung-thermal.git
F: drivers/thermal/samsung/
SAMSUNG USB2 PHY DRIVER
M: Kamil Debski <k.debski@samsung.com>
L: linux-kernel@vger.kernel.org

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 0
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc4
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*

14
arch/arc/include/asm/processor.h
View File

@ -47,9 +47,6 @@ struct thread_struct {
/* Forward declaration, a strange C thing */
struct task_struct;
/* Return saved PC of a blocked thread */
unsigned long thread_saved_pc(struct task_struct *t);
#define task_pt_regs(p) \
((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1)
@ -72,18 +69,21 @@ unsigned long thread_saved_pc(struct task_struct *t);
#define release_segments(mm) do { } while (0)
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->ret)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->sp)
/*
* Where abouts of Task's sp, fp, blink when it was last seen in kernel mode.
* Look in process.c for details of kernel stack layout
*/
#define KSTK_ESP(tsk) (tsk->thread.ksp)
#define TSK_K_ESP(tsk) (tsk->thread.ksp)
#define KSTK_REG(tsk, off) (*((unsigned int *)(KSTK_ESP(tsk) + \
#define TSK_K_REG(tsk, off) (*((unsigned int *)(TSK_K_ESP(tsk) + \
sizeof(struct callee_regs) + off)))
#define KSTK_BLINK(tsk) KSTK_REG(tsk, 4)
#define KSTK_FP(tsk) KSTK_REG(tsk, 0)
#define TSK_K_BLINK(tsk) TSK_K_REG(tsk, 4)
#define TSK_K_FP(tsk) TSK_K_REG(tsk, 0)
#define thread_saved_pc(tsk) TSK_K_BLINK(tsk)
extern void start_thread(struct pt_regs * regs, unsigned long pc,
unsigned long usp);

37
arch/arc/include/asm/stacktrace.h Normal file
View File

@ -0,0 +1,37 @@
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_STACKTRACE_H
#define __ASM_STACKTRACE_H
#include <linux/sched.h>
/**
* arc_unwind_core - Unwind the kernel mode stack for an execution context
* @tsk: NULL for current task, specific task otherwise
* @regs: pt_regs used to seed the unwinder {SP, FP, BLINK, PC}
* If NULL, use pt_regs of @tsk (if !NULL) otherwise
* use the current values of {SP, FP, BLINK, PC}
* @consumer_fn: Callback invoked for each frame unwound
* Returns 0 to continue unwinding, -1 to stop
* @arg: Arg to callback
*
* Returns the address of first function in stack
*
* Semantics:
* - synchronous unwinding (e.g. dump_stack): @tsk NULL, @regs NULL
* - Asynchronous unwinding of sleeping task: @tsk !NULL, @regs NULL
* - Asynchronous unwinding of intr/excp etc: @tsk !NULL, @regs !NULL
*/
notrace noinline unsigned int arc_unwind_core(
struct task_struct *tsk, struct pt_regs *regs,
int (*consumer_fn) (unsigned int, void *),
void *arg);
#endif /* __ASM_STACKTRACE_H */

23
arch/arc/kernel/process.c
View File

@ -192,29 +192,6 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
return 0;
}
/*
* API: expected by schedular Code: If thread is sleeping where is that.
* What is this good for? it will be always the scheduler or ret_from_fork.
* So we hard code that anyways.
*/
unsigned long thread_saved_pc(struct task_struct *t)
{
struct pt_regs *regs = task_pt_regs(t);
unsigned long blink = 0;
/*
* If the thread being queried for in not itself calling this, then it
* implies it is not executing, which in turn implies it is sleeping,
* which in turn implies it got switched OUT by the schedular.
* In that case, it's kernel mode blink can reliably retrieved as per
* the picture above (right above pt_regs).
*/
if (t != current && t->state != TASK_RUNNING)
blink = *((unsigned int *)regs - 1);
return blink;
}
int elf_check_arch(const struct elf32_hdr *x)
{
unsigned int eflags;

21
arch/arc/kernel/stacktrace.c
View File

@ -43,6 +43,10 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
struct pt_regs *regs,
struct unwind_frame_info *frame_info)
{
/*
* synchronous unwinding (e.g. dump_stack)
* - uses current values of SP and friends
*/
if (tsk == NULL && regs == NULL) {
unsigned long fp, sp, blink, ret;
frame_info->task = current;
@ -61,12 +65,17 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
frame_info->regs.r63 = ret;
frame_info->call_frame = 0;
} else if (regs == NULL) {
/*
* Asynchronous unwinding of sleeping task
* - Gets SP etc from task's pt_regs (saved bottom of kernel
* mode stack of task)
*/
frame_info->task = tsk;
frame_info->regs.r27 = KSTK_FP(tsk);
frame_info->regs.r28 = KSTK_ESP(tsk);
frame_info->regs.r31 = KSTK_BLINK(tsk);
frame_info->regs.r27 = TSK_K_FP(tsk);
frame_info->regs.r28 = TSK_K_ESP(tsk);
frame_info->regs.r31 = TSK_K_BLINK(tsk);
frame_info->regs.r63 = (unsigned int)__switch_to;
/* In the prologue of __switch_to, first FP is saved on stack
@ -83,6 +92,10 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
frame_info->call_frame = 0;
} else {
/*
* Asynchronous unwinding of intr/exception
* - Just uses the pt_regs passed
*/
frame_info->task = tsk;
frame_info->regs.r27 = regs->fp;
@ -95,7 +108,7 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
#endif
static noinline unsigned int
notrace noinline unsigned int
arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
int (*consumer_fn) (unsigned int, void *), void *arg)
{

2
arch/arc/kernel/unaligned.c
View File

@ -12,6 +12,7 @@
*/
#include <linux/types.h>
#include <linux/perf_event.h>
#include <linux/ptrace.h>
#include <linux/uaccess.h>
#include <asm/disasm.h>
@ -253,6 +254,7 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
}
}
perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, address);
return 0;
fault:

12
arch/arc/mm/fault.c
View File

@ -14,6 +14,7 @@
#include <linux/ptrace.h>
#include <linux/uaccess.h>
#include <linux/kdebug.h>
#include <linux/perf_event.h>
#include <asm/pgalloc.h>
#include <asm/mmu.h>
@ -139,13 +140,20 @@ good_area:
return;
}
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
if (likely(!(fault & VM_FAULT_ERROR))) {
if (flags & FAULT_FLAG_ALLOW_RETRY) {
/* To avoid updating stats twice for retry case */
if (fault & VM_FAULT_MAJOR)
if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
else
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
regs, address);
} else {
tsk->min_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
regs, address);
}
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;

1
arch/arm/Kconfig
View File

@ -619,6 +619,7 @@ config ARCH_PXA
select GENERIC_CLOCKEVENTS
select GPIO_PXA
select HAVE_IDE
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
select PLAT_PXA
select SPARSE_IRQ

1
arch/arm/Makefile
View File

@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN) += berlin
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EFM32) += efm32

8
arch/arm/boot/dts/am335x-bone-common.dtsi
View File

@ -301,3 +301,11 @@
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
};
&aes {
status = "okay";
};
&sham {
status = "okay";
};

8
arch/arm/boot/dts/am335x-bone.dts
View File

@ -24,11 +24,3 @@
&mmc1 {
vmmc-supply = <&ldo3_reg>;
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};

4
arch/arm/boot/dts/am335x-lxm.dts
View File

@ -328,6 +328,10 @@
dual_emac_res_vlan = <3>;
};
&phy_sel {
rmii-clock-ext;
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;

6
arch/arm/boot/dts/am33xx-clocks.dtsi
View File

@ -99,7 +99,7 @@
ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <0>;
reg = <0x0664>;
};
@ -107,7 +107,7 @@
ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <1>;
reg = <0x0664>;
};
@ -115,7 +115,7 @@
ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <2>;
reg = <0x0664>;
};

12
arch/arm/boot/dts/am43xx-clocks.dtsi
View File

@ -107,7 +107,7 @@
ehrpwm0_tbclk: ehrpwm0_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <0>;
reg = <0x0664>;
};
@ -115,7 +115,7 @@
ehrpwm1_tbclk: ehrpwm1_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <1>;
reg = <0x0664>;
};
@ -123,7 +123,7 @@
ehrpwm2_tbclk: ehrpwm2_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <2>;
reg = <0x0664>;
};
@ -131,7 +131,7 @@
ehrpwm3_tbclk: ehrpwm3_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <4>;
reg = <0x0664>;
};
@ -139,7 +139,7 @@
ehrpwm4_tbclk: ehrpwm4_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <5>;
reg = <0x0664>;
};
@ -147,7 +147,7 @@
ehrpwm5_tbclk: ehrpwm5_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <6>;
reg = <0x0664>;
};

6
arch/arm/boot/dts/at91-sama5d3_xplained.dts
View File

@ -167,7 +167,13 @@
macb1: ethernet@f802c000 {
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ethernet-phy@1 {
reg = <0x1>;
};
};
dbgu: serial@ffffee00 {

7
arch/arm/boot/dts/at91sam9260.dtsi
View File

@ -494,12 +494,12 @@
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */
<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */
<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
@ -853,7 +853,7 @@
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9260-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
@ -976,7 +976,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

9
arch/arm/boot/dts/at91sam9261.dtsi
View File

@ -124,11 +124,12 @@
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9261-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&udc_clk>, <&udpck>;
clock-names = "usb_clk", "udc_clk", "udpck";
clocks = <&udc_clk>, <&udpck>;
clock-names = "pclk", "hclk";
atmel,matrix = <&matrix>;
status = "disabled";
};
@ -262,7 +263,7 @@
};
matrix: matrix@ffffee00 {
compatible = "atmel,at91sam9260-bus-matrix";
compatible = "atmel,at91sam9260-bus-matrix", "syscon";
reg = <0xffffee00 0x200>;
};

5
arch/arm/boot/dts/at91sam9263.dtsi
View File

@ -69,7 +69,7 @@
sram1: sram@00500000 {
compatible = "mmio-sram";
reg = <0x00300000 0x4000>;
reg = <0x00500000 0x4000>;
};
ahb {
@ -856,7 +856,7 @@
};
usb1: gadget@fff78000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9263-udc";
reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
@ -905,7 +905,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

3
arch/arm/boot/dts/at91sam9g45.dtsi
View File

@ -1116,7 +1116,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1301,7 +1300,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
status = "disabled";
};

1
arch/arm/boot/dts/at91sam9n12.dtsi
View File

@ -894,7 +894,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

5
arch/arm/boot/dts/at91sam9x5.dtsi
View File

@ -1066,7 +1066,7 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&usb>, <&udphs_clk>;
clocks = <&utmi>, <&udphs_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
@ -1130,7 +1130,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1186,7 +1185,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};

19
arch/arm/boot/dts/dm8168-evm.dts
View File

@ -36,6 +36,20 @@
>;
};
mmc_pins: pinmux_mmc_pins {
pinctrl-single,pins = <
DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */
DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */
DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */
DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */
DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */
DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */
DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */
DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */
DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */
>;
};
usb0_pins: pinmux_usb0_pins {
pinctrl-single,pins = <
DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */
@ -137,7 +151,12 @@
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc_pins>;
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
/* At least dm8168-evm rev c won't support multipoint, later may */

18
arch/arm/boot/dts/dm816x.dtsi
View File

@ -150,17 +150,27 @@
};
gpio1: gpio@48032000 {
compatible = "ti,omap3-gpio";
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";
ti,gpio-always-on;
reg = <0x48032000 0x1000>;
interrupts = <97>;
interrupts = <96>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@4804c000 {
compatible = "ti,omap3-gpio";
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
ti,gpio-always-on;
reg = <0x4804c000 0x1000>;
interrupts = <99>;
interrupts = <98>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpmc: gpmc@50000000 {

10
arch/arm/boot/dts/dra7-evm.dts
View File

@ -263,17 +263,15 @@
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (MUX_MODE15) /* wakeup0.off */
0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
};

2
arch/arm/boot/dts/dra7.dtsi
View File

@ -1123,7 +1123,6 @@
"wkupclk", "refclk",
"div-clk", "phy-div";
#phy-cells = <0>;
ti,hwmods = "pcie1-phy";
};
pcie2_phy: pciephy@4a095000 {
@ -1142,7 +1141,6 @@
"wkupclk", "refclk",
"div-clk", "phy-div";
#phy-cells = <0>;
ti,hwmods = "pcie2-phy";
status = "disabled";
};
};

10
arch/arm/boot/dts/dra72-evm.dts
View File

@ -119,17 +119,15 @@
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (MUX_MODE15) /* wakeup0.off */
0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};

90
arch/arm/boot/dts/dra7xx-clocks.dtsi
View File

@ -243,10 +243,18 @@
ti,invert-autoidle-bit;
};
dpll_core_byp_mux: dpll_core_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x012c>;
};
dpll_core_ck: dpll_core_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-core-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
};
@ -309,10 +317,18 @@
clock-div = <1>;
};
dpll_dsp_byp_mux: dpll_dsp_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x0240>;
};
dpll_dsp_ck: dpll_dsp_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
};
@ -335,10 +351,18 @@
clock-div = <1>;
};
dpll_iva_byp_mux: dpll_iva_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x01ac>;
};
dpll_iva_ck: dpll_iva_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
};
@ -361,10 +385,18 @@
clock-div = <1>;
};
dpll_gpu_byp_mux: dpll_gpu_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x02e4>;
};
dpll_gpu_ck: dpll_gpu_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
};
@ -398,10 +430,18 @@
clock-div = <1>;
};
dpll_ddr_byp_mux: dpll_ddr_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x021c>;
};
dpll_ddr_ck: dpll_ddr_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
};
@ -416,10 +456,18 @@
ti,invert-autoidle-bit;
};
dpll_gmac_byp_mux: dpll_gmac_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x02b4>;
};
dpll_gmac_ck: dpll_gmac_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
};
@ -482,10 +530,18 @@
clock-div = <1>;
};
dpll_eve_byp_mux: dpll_eve_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x0290>;
};
dpll_eve_ck: dpll_eve_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
};
@ -1249,10 +1305,18 @@
clock-div = <1>;
};
dpll_per_byp_mux: dpll_per_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x014c>;
};
dpll_per_ck: dpll_per_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
};
@ -1275,10 +1339,18 @@
clock-div = <1>;
};
dpll_usb_byp_mux: dpll_usb_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x018c>;
};
dpll_usb_ck: dpll_usb_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-j-type-clock";
clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
};

2
arch/arm/boot/dts/exynos3250.dtsi
View File

@ -18,6 +18,7 @@
*/
#include "skeleton.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos3250.h>
/ {
@ -193,6 +194,7 @@
interrupts = <0 216 0>;
clocks = <&cmu CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
status = "disabled";
};

52
arch/arm/boot/dts/exynos4-cpu-thermal.dtsi Normal file
View File

@ -0,0 +1,52 @@
/*
* Device tree sources for Exynos4 thermal zone
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal.h>
/ {
thermal-zones {
cpu_thermal: cpu-thermal {
thermal-sensors = <&tmu 0>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu_alert0: cpu-alert-0 {
temperature = <70000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_alert1: cpu-alert-1 {
temperature = <95000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_alert2: cpu-alert-2 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_crit0: cpu-crit-0 {
temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
};
map1 {
trip = <&cpu_alert1>;
};
};
};
};
};

45
arch/arm/boot/dts/exynos4.dtsi
View File

@ -38,6 +38,7 @@
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
i2c8 = &i2c_8;
csis0 = &csis_0;
csis1 = &csis_1;
fimc0 = &fimc_0;
@ -104,6 +105,7 @@
compatible = "samsung,exynos4210-pd";
reg = <0x10023C20 0x20>;
#power-domain-cells = <0>;
power-domains = <&pd_lcd0>;
};
pd_cam: cam-power-domain@10023C00 {
@ -554,6 +556,22 @@
status = "disabled";
};
i2c_8: i2c@138E0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x138E0000 0x100>;
interrupts = <0 93 0>;
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
hdmi_i2c_phy: hdmiphy@38 {
compatible = "exynos4210-hdmiphy";
reg = <0x38>;
};
};
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
@ -663,6 +681,33 @@
status = "disabled";
};
tmu: tmu@100C0000 {
#include "exynos4412-tmu-sensor-conf.dtsi"
};
hdmi: hdmi@12D00000 {
compatible = "samsung,exynos4210-hdmi";
reg = <0x12D00000 0x70000>;
interrupts = <0 92 0>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
"mout_hdmi";
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
phy = <&hdmi_i2c_phy>;
power-domains = <&pd_tv>;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
};
mixer: mixer@12C10000 {
compatible = "samsung,exynos4210-mixer";
interrupts = <0 91 0>;
reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
power-domains = <&pd_tv>;
status = "disabled";
};
ppmu_dmc0: ppmu_dmc0@106a0000 {
compatible = "samsung,exynos-ppmu";
reg = <0x106a0000 0x2000>;

19
arch/arm/boot/dts/exynos4210-trats.dts
View File

@ -426,6 +426,25 @@
status = "okay";
};
tmu@100C0000 {
status = "okay";
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 2 2>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 4 4>;
};
};
};
};
camera {
pinctrl-names = "default";
pinctrl-0 = <>;

57
arch/arm/boot/dts/exynos4210-universal_c210.dts
View File

@ -505,6 +505,63 @@
assigned-clock-rates = <0>, <160000000>;
};
};
hdmi_en: voltage-regulator-hdmi-5v {
compatible = "regulator-fixed";
regulator-name = "HDMI_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpe0 1 0>;
enable-active-high;
};
hdmi_ddc: i2c-ddc {
compatible = "i2c-gpio";
gpios = <&gpe4 2 0 &gpe4 3 0>;
i2c-gpio,delay-us = <100>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&i2c_ddc_bus>;
pinctrl-names = "default";
status = "okay";
};
mixer@12C10000 {
status = "okay";
};
hdmi@12D00000 {
hpd-gpio = <&gpx3 7 0>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
hdmi-en-supply = <&hdmi_en>;
vdd-supply = <&ldo3_reg>;
vdd_osc-supply = <&ldo4_reg>;
vdd_pll-supply = <&ldo3_reg>;
ddc = <&hdmi_ddc>;
status = "okay";
};
i2c@138E0000 {
status = "okay";
};
};
&pinctrl_1 {
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <0>;
};
};
&pinctrl_0 {
i2c_ddc_bus: i2c-ddc-bus {
samsung,pins = "gpe4-2", "gpe4-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};
&mdma1 {

38
arch/arm/boot/dts/exynos4210.dtsi
View File

@ -21,6 +21,7 @@
#include "exynos4.dtsi"
#include "exynos4210-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
/ {
compatible = "samsung,exynos4210", "samsung,exynos4";
@ -35,10 +36,13 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@900 {
cpu0: cpu@900 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x900>;
cooling-min-level = <4>;
cooling-max-level = <2>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@901 {
@ -153,16 +157,38 @@
reg = <0x03860000 0x1000>;
};
tmu@100C0000 {
tmu: tmu@100C0000 {
compatible = "samsung,exynos4210-tmu";
interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>;
interrupts = <2 4>;
clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
samsung,tmu_gain = <15>;
samsung,tmu_reference_voltage = <7>;
status = "disabled";
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
trips {
cpu_alert0: cpu-alert-0 {
temperature = <85000>; /* millicelsius */
};
cpu_alert1: cpu-alert-1 {
temperature = <100000>; /* millicelsius */
};
cpu_alert2: cpu-alert-2 {
temperature = <110000>; /* millicelsius */
};
};
};
};
g2d@12800000 {
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
@ -203,6 +229,14 @@
};
};
mixer: mixer@12C10000 {
clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
"sclk_mixer";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
<&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
};
ppmu_lcd1: ppmu_lcd1@12240000 {
compatible = "samsung,exynos-ppmu";
reg = <0x12240000 0x2000>;

5
arch/arm/boot/dts/exynos4212.dtsi
View File

@ -26,10 +26,13 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@A00 {
cpu0: cpu@A00 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@A01 {

64
arch/arm/boot/dts/exynos4412-odroid-common.dtsi
View File

@ -249,6 +249,20 @@
regulator-always-on;
};
ldo8_reg: ldo@8 {
regulator-compatible = "LDO8";
regulator-name = "VDD10_HDMI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo10_reg: ldo@10 {
regulator-compatible = "LDO10";
regulator-name = "VDDQ_MIPIHSI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo11_reg: LDO11 {
regulator-name = "VDD18_ABB1_1.8V";
regulator-min-microvolt = <1800000>;
@ -411,6 +425,51 @@
ehci: ehci@12580000 {
status = "okay";
};
tmu@100C0000 {
vtmu-supply = <&ldo10_reg>;
status = "okay";
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 13 13>;
};
};
};
};
mixer: mixer@12C10000 {
status = "okay";
};
hdmi@12D00000 {
hpd-gpio = <&gpx3 7 0>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
ddc = <&hdmi_ddc>;
status = "okay";
};
hdmi_ddc: i2c@13880000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
};
i2c@138E0000 {
status = "okay";
};
};
&pinctrl_1 {
@ -425,4 +484,9 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <1>;
};
};

24
arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi Normal file
View File

@ -0,0 +1,24 @@
/*
* Device tree sources for Exynos4412 TMU sensor configuration
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <8>;
samsung,tmu_reference_voltage = <16>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <55>;
samsung,tmu_min_efuse_value = <40>;
samsung,tmu_max_efuse_value = <100>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <85>;
samsung,tmu_default_temp_offset = <50>;
samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;

15
arch/arm/boot/dts/exynos4412-trats2.dts
View File

@ -927,6 +927,21 @@
pulldown-ohm = <100000>; /* 100K */
io-channels = <&adc 2>; /* Battery temperature */
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 13 13>;
};
};
};
};
};
&pmu_system_controller {

5
arch/arm/boot/dts/exynos4412.dtsi
View File

@ -26,10 +26,13 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@A00 {
cpu0: cpu@A00 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@A01 {

12
arch/arm/boot/dts/exynos4x12.dtsi
View File

@ -19,6 +19,7 @@
#include "exynos4.dtsi"
#include "exynos4x12-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
/ {
aliases {
@ -297,4 +298,15 @@
clock-names = "tmu_apbif";
status = "disabled";
};
hdmi: hdmi@12D00000 {
compatible = "samsung,exynos4212-hdmi";
};
mixer: mixer@12C10000 {
compatible = "samsung,exynos4212-mixer";
clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
};
};

20
arch/arm/boot/dts/exynos5250-spring.dts
View File

@ -429,7 +429,6 @@
&mmc_0 {
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
@ -437,11 +436,8 @@
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
/*
@ -451,7 +447,6 @@
&mmc_1 {
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
@ -459,11 +454,8 @@
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
bus-width = <4>;
cap-sd-highspeed;
};
&pinctrl_0 {
@ -490,7 +482,7 @@
power_key_irq: power-key-irq {
samsung,pins = "gpx1-3";
samsung,pin-function = <0>;
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
@ -518,7 +510,7 @@
lid_irq: lid-irq {
samsung,pins = "gpx3-5";
samsung,pin-function = <0>;
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};

44
arch/arm/boot/dts/exynos5250.dtsi
View File

@ -20,7 +20,7 @@
#include <dt-bindings/clock/exynos5250.h>
#include "exynos5.dtsi"
#include "exynos5250-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos-audss-clk.h>
/ {
@ -58,11 +58,14 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1700000000>;
cooling-min-level = <15>;
cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
device_type = "cpu";
@ -102,6 +105,12 @@
#power-domain-cells = <0>;
};
pd_disp1: disp1-power-domain@100440A0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440A0 0x20>;
#power-domain-cells = <0>;
};
clock: clock-controller@10010000 {
compatible = "samsung,exynos5250-clock";
reg = <0x10010000 0x30000>;
@ -235,12 +244,32 @@
status = "disabled";
};
tmu@10060000 {
tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 9 9>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 15 15>;
};
};
};
};
serial@12C00000 {
@ -719,6 +748,7 @@
hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
interrupts = <0 95 0>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
@ -731,9 +761,11 @@
mixer {
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
};
dp_phy: video-phy@10040720 {
@ -743,6 +775,7 @@
};
dp: dp-controller@145B0000 {
power-domains = <&pd_disp1>;
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
@ -750,6 +783,7 @@
};
fimd: fimd@14400000 {
power-domains = <&pd_disp1>;
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};

35
arch/arm/boot/dts/exynos5420-trip-points.dtsi Normal file
View File

@ -0,0 +1,35 @@
/*
* Device tree sources for default Exynos5420 thermal zone definition
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu-alert-0 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-alert-1 {
temperature = <103000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-alert-2 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-crit-0 {
temperature = <1200000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};

33
arch/arm/boot/dts/exynos5420.dtsi
View File

@ -740,8 +740,9 @@
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
power-domains = <&disp_pd>;
};
@ -782,6 +783,7 @@
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu1: tmu@10064000 {
@ -790,6 +792,7 @@
interrupts = <0 183 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu2: tmu@10068000 {
@ -798,6 +801,7 @@
interrupts = <0 184 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu3: tmu@1006c000 {
@ -806,6 +810,7 @@
interrupts = <0 185 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_gpu: tmu@100a0000 {
@ -814,6 +819,30 @@
interrupts = <0 215 0>;
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmu_cpu0>;
#include "exynos5420-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmu_cpu1>;
#include "exynos5420-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmu_cpu2>;
#include "exynos5420-trip-points.dtsi"
};
cpu3_thermal: cpu3-thermal {
thermal-sensors = <&tmu_cpu3>;
#include "exynos5420-trip-points.dtsi"
};
gpu_thermal: gpu-thermal {
thermal-sensors = <&tmu_gpu>;
#include "exynos5420-trip-points.dtsi"
};
};
watchdog: watchdog@101D0000 {

24
arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi Normal file
View File

@ -0,0 +1,24 @@
/*
* Device tree sources for Exynos5440 TMU sensor configuration
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <5>;
samsung,tmu_reference_voltage = <16>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <0x5d2d>;
samsung,tmu_min_efuse_value = <16>;
samsung,tmu_max_efuse_value = <76>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <70>;
samsung,tmu_default_temp_offset = <25>;
samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;

25
arch/arm/boot/dts/exynos5440-trip-points.dtsi Normal file
View File

@ -0,0 +1,25 @@
/*
* Device tree sources for default Exynos5440 thermal zone definition
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu-alert-0 {
temperature = <100000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "active";
};
cpu-crit-0 {
temperature = <1050000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};

18
arch/arm/boot/dts/exynos5440.dtsi
View File

@ -219,6 +219,7 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
tmuctrl_1: tmuctrl@16011C {
@ -227,6 +228,7 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
tmuctrl_2: tmuctrl@160120 {
@ -235,6 +237,22 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmuctrl_0>;
#include "exynos5440-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmuctrl_1>;
#include "exynos5440-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmuctrl_2>;
#include "exynos5440-trip-points.dtsi"
};
};
sata@210000 {

2
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View File

@ -35,6 +35,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_usb_h1_vbus: regulator@1 {
@ -45,6 +46,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 29 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_audio: regulator@2 {

2
arch/arm/boot/dts/imx6sl-evk.dts
View File

@ -52,6 +52,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 0 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_usb_otg2_vbus: regulator@1 {
@ -62,6 +63,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 2 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_aud3v: regulator@2 {

4
arch/arm/boot/dts/omap3.dtsi
View File

@ -92,6 +92,8 @@
ti,hwmods = "aes";
reg = <0x480c5000 0x50>;
interrupts = <0>;
dmas = <&sdma 65 &sdma 66>;
dma-names = "tx", "rx";
};
prm: prm@48306000 {
@ -550,6 +552,8 @@
ti,hwmods = "sham";
reg = <0x480c3000 0x64>;
interrupts = <49>;
dmas = <&sdma 69>;
dma-names = "rx";
};
smartreflex_core: smartreflex@480cb000 {

2
arch/arm/boot/dts/omap5-core-thermal.dtsi
View File

@ -13,7 +13,7 @@
core_thermal: core_thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
/* sensor ID */
thermal-sensors = <&bandgap 2>;

2
arch/arm/boot/dts/omap5-gpu-thermal.dtsi
View File

@ -13,7 +13,7 @@
gpu_thermal: gpu_thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
/* sensor ID */
thermal-sensors = <&bandgap 1>;

4
arch/arm/boot/dts/omap5.dtsi
View File

@ -1079,4 +1079,8 @@
};
};
&cpu_thermal {
polling-delay = <500>; /* milliseconds */
};
/include/ "omap54xx-clocks.dtsi"

41
arch/arm/boot/dts/omap54xx-clocks.dtsi
View File

@ -167,10 +167,18 @@
ti,index-starts-at-one;
};
dpll_core_byp_mux: dpll_core_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x012c>;
};
dpll_core_ck: dpll_core_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-core-clock";
clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
};
@ -294,10 +302,18 @@
clock-div = <1>;
};
dpll_iva_byp_mux: dpll_iva_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x01ac>;
};
dpll_iva_ck: dpll_iva_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
};
@ -599,10 +615,19 @@
};
};
&cm_core_clocks {
dpll_per_byp_mux: dpll_per_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x014c>;
};
dpll_per_ck: dpll_per_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
};
@ -714,10 +739,18 @@
ti,index-starts-at-one;
};
dpll_usb_byp_mux: dpll_usb_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x018c>;
};
dpll_usb_ck: dpll_usb_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-j-type-clock";
clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
};

1
arch/arm/boot/dts/rk3288.dtsi
View File

@ -411,6 +411,7 @@
"mac_clk_rx", "mac_clk_tx",
"clk_mac_ref", "clk_mac_refout",
"aclk_mac", "pclk_mac";
status = "disabled";
};
usb_host0_ehci: usb@ff500000 {

3
arch/arm/boot/dts/sama5d3.dtsi
View File

@ -1248,7 +1248,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1416,7 +1415,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};

9
arch/arm/boot/dts/sama5d4.dtsi
View File

@ -66,6 +66,7 @@
gpio4 = &pioE;
tcb0 = &tcb0;
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c2 = &i2c2;
};
cpus {
@ -259,7 +260,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
@ -461,8 +462,8 @@
lcdck: lcdck {
#clock-cells = <0>;
reg = <4>;
clocks = <&smd>;
reg = <3>;
clocks = <&mck>;
};
smdck: smdck {
@ -770,7 +771,7 @@
reg = <50>;
};
lcd_clk: lcd_clk {
lcdc_clk: lcdc_clk {
#clock-cells = <0>;
reg = <51>;
};

8
arch/arm/boot/dts/socfpga.dtsi
View File

@ -660,7 +660,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfff01000 0x1000>;
interrupts = <0 156 4>;
interrupts = <0 155 4>;
num-cs = <4>;
clocks = <&spi_m_clk>;
status = "disabled";
@ -713,6 +713,9 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
dmas = <&pdma 28>,
<&pdma 29>;
dma-names = "tx", "rx";
};
uart1: serial1@ffc03000 {
@ -722,6 +725,9 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
dmas = <&pdma 30>,
<&pdma 31>;
dma-names = "tx", "rx";
};
rst: rstmgr@ffd05000 {

16
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
View File

@ -56,6 +56,22 @@
model = "Olimex A10-OLinuXino-LIME";
compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
cpus {
cpu0: cpu@0 {
/*
* The A10-Lime is known to be unstable
* when running at 1008 MHz
*/
operating-points = <
/* kHz uV */
912000 1350000
864000 1300000
624000 1250000
>;
cooling-max-level = <2>;
};
};
soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";

3
arch/arm/boot/dts/sun4i-a10.dtsi
View File

@ -75,7 +75,6 @@
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
1056000 1500000
1008000 1400000
912000 1350000
864000 1300000
@ -83,7 +82,7 @@
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <4>;
cooling-max-level = <3>;
};
};

3
arch/arm/boot/dts/sun5i-a13.dtsi
View File

@ -47,7 +47,6 @@
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
1104000 1500000
1008000 1400000
912000 1350000
864000 1300000
@ -57,7 +56,7 @@
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <6>;
cooling-max-level = <5>;
};
};

3
arch/arm/boot/dts/sun7i-a20.dtsi
View File

@ -105,7 +105,6 @@
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
1008000 1450000
960000 1400000
912000 1400000
864000 1300000
@ -116,7 +115,7 @@
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <7>;
cooling-max-level = <6>;
};
cpu@1 {

1
arch/arm/configs/at91_dt_defconfig
View File

@ -70,6 +70,7 @@ CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_DM9000=y

2
arch/arm/configs/multi_v7_defconfig
View File

@ -99,7 +99,7 @@ CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCI_RCAR_GEN2_PCIE=y
CONFIG_PCIEPORTBUS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_NR_CPUS=16
CONFIG_HIGHPTE=y
CONFIG_CMA=y
CONFIG_ARM_APPENDED_DTB=y

1
arch/arm/configs/omap2plus_defconfig
View File

@ -377,6 +377,7 @@ CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_OMAP_USB2=m
CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set

2
arch/arm/configs/sama5_defconfig
View File

@ -3,8 +3,6 @@
CONFIG_SYSVIPC=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y

1
arch/arm/configs/sunxi_defconfig
View File

@ -4,6 +4,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_PERF_EVENTS=y
CONFIG_ARCH_SUNXI=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y

2
arch/arm/configs/vexpress_defconfig
View File

@ -118,8 +118,8 @@ CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_ISP1760=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y

2
arch/arm/include/asm/kvm_mmu.h
View File

@ -207,7 +207,7 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached;
VM_BUG_ON(size & PAGE_MASK);
VM_BUG_ON(size & ~PAGE_MASK);
if (!need_flush && !icache_is_pipt())
goto vipt_cache;

5
arch/arm/include/debug/at91.S
View File

@ -18,8 +18,11 @@
#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
#endif
/* Keep in sync with mach-at91/include/mach/hardware.h */
#ifdef CONFIG_MMU
#define AT91_IO_P2V(x) ((x) - 0x01000000)
#else
#define AT91_IO_P2V(x) (x)
#endif
#define AT91_DBGU_SR (0x14) /* Status Register */
#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */

2
arch/arm/kvm/arm.c
View File

@ -540,7 +540,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
vcpu->mode = OUTSIDE_GUEST_MODE;
kvm_guest_exit();
trace_kvm_exit(*vcpu_pc(vcpu));
trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
/*
* We may have taken a host interrupt in HYP mode (ie
* while executing the guest). This interrupt is still

10
arch/arm/kvm/trace.h
View File

@ -25,18 +25,22 @@ TRACE_EVENT(kvm_entry,
);
TRACE_EVENT(kvm_exit,
TP_PROTO(unsigned long vcpu_pc),
TP_ARGS(vcpu_pc),
TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc),
TP_ARGS(exit_reason, vcpu_pc),
TP_STRUCT__entry(
__field( unsigned int, exit_reason )
__field( unsigned long, vcpu_pc )
),
TP_fast_assign(
__entry->exit_reason = exit_reason;
__entry->vcpu_pc = vcpu_pc;
),
TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx",
__entry->exit_reason,
__entry->vcpu_pc)
);
TRACE_EVENT(kvm_guest_fault,

22
arch/arm/mach-at91/pm.c
View File

@ -270,37 +270,35 @@ static void __init at91_pm_sram_init(void)
phys_addr_t sram_pbase;
unsigned long sram_base;
struct device_node *node;
struct platform_device *pdev;
struct platform_device *pdev = NULL;
node = of_find_compatible_node(NULL, NULL, "mmio-sram");
if (!node) {
pr_warn("%s: failed to find sram node!\n", __func__);
return;
for_each_compatible_node(node, NULL, "mmio-sram") {
pdev = of_find_device_by_node(node);
if (pdev) {
of_node_put(node);
break;
}
}
pdev = of_find_device_by_node(node);
if (!pdev) {
pr_warn("%s: failed to find sram device!\n", __func__);
goto put_node;
return;
}
sram_pool = dev_get_gen_pool(&pdev->dev);
if (!sram_pool) {
pr_warn("%s: sram pool unavailable!\n", __func__);
goto put_node;
return;
}
sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
if (!sram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
goto put_node;
return;
}
sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
put_node:
of_node_put(node);
}
#endif

2
arch/arm/mach-at91/pm.h
View File

@ -44,7 +44,7 @@ static inline void at91rm9200_standby(void)
" mcr p15, 0, %0, c7, c0, 4\n\t"
" str %5, [%1, %2]"
:
: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
"r" (1), "r" (AT91RM9200_SDRAMC_SRR),
"r" (lpr));
}

80
arch/arm/mach-at91/pm_slowclock.S
View File

@ -25,11 +25,6 @@
*/
#undef SLOWDOWN_MASTER_CLOCK
#define MCKRDY_TIMEOUT 1000
#define MOSCRDY_TIMEOUT 1000
#define PLLALOCK_TIMEOUT 1000
#define PLLBLOCK_TIMEOUT 1000
pmc .req r0
sdramc .req r1
ramc1 .req r2
@ -41,60 +36,42 @@ tmp2 .req r5
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
mov tmp2, #MCKRDY_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MCKRDY
beq 1b
2:
.endm
/*
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
mov tmp2, #MOSCRDY_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCS
beq 1b
2:
.endm
/*
* Wait until PLLA has locked.
*/
.macro wait_pllalock
mov tmp2, #PLLALOCK_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKA
beq 1b
2:
.endm
/*
* Wait until PLLB has locked.
*/
.macro wait_pllblock
mov tmp2, #PLLBLOCK_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKB
beq 1b
2:
.endm
.text
.arm
/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
* void __iomem *ramc1, int memctrl)
*/
@ -134,6 +111,16 @@ ddr_sr_enable:
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_sr_enable
/* LPDDR1 --> force DDR2 mode during self-refresh */
ldr tmp1, [sdramc, #AT91_DDRSDRC_MDR]
str tmp1, .saved_sam9_mdr
bic tmp1, tmp1, #~AT91_DDRSDRC_MD
cmp tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
biceq tmp1, tmp1, #AT91_DDRSDRC_MD
orreq tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
streq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
/* prepare for DDRAM self-refresh mode */
ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
str tmp1, .saved_sam9_lpr
@ -142,14 +129,26 @@ ddr_sr_enable:
/* figure out if we use the second ram controller */
cmp ramc1, #0
ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
strne tmp2, .saved_sam9_lpr1
bicne tmp2, #AT91_DDRSDRC_LPCB
orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
beq ddr_no_2nd_ctrl
ldr tmp2, [ramc1, #AT91_DDRSDRC_MDR]
str tmp2, .saved_sam9_mdr1
bic tmp2, tmp2, #~AT91_DDRSDRC_MD
cmp tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
biceq tmp2, tmp2, #AT91_DDRSDRC_MD
orreq tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
streq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
ldr tmp2, [ramc1, #AT91_DDRSDRC_LPR]
str tmp2, .saved_sam9_lpr1
bic tmp2, #AT91_DDRSDRC_LPCB
orr tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* Enable DDRAM self-refresh mode */
str tmp2, [ramc1, #AT91_DDRSDRC_LPR]
ddr_no_2nd_ctrl:
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
b sdr_sr_done
@ -208,6 +207,7 @@ sdr_sr_done:
/* Turn off the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Wait for interrupt */
@ -216,6 +216,7 @@ sdr_sr_done:
/* Turn on the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
wait_moscrdy
@ -280,12 +281,17 @@ sdr_sr_done:
*/
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_en_restore
/* Restore MDR in case of LPDDR1 */
ldr tmp1, .saved_sam9_mdr
str tmp1, [sdramc, #AT91_DDRSDRC_MDR]
/* Restore LPR on AT91 with DDRAM */
ldr tmp1, .saved_sam9_lpr
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
/* if we use the second ram controller */
cmp ramc1, #0
ldrne tmp2, .saved_sam9_mdr1
strne tmp2, [ramc1, #AT91_DDRSDRC_MDR]
ldrne tmp2, .saved_sam9_lpr1
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
@ -319,5 +325,11 @@ ram_restored:
.saved_sam9_lpr1:
.word 0
.saved_sam9_mdr:
.word 0
.saved_sam9_mdr1:
.word 0
ENTRY(at91_slow_clock_sz)
.word .-at91_slow_clock

2
arch/arm/mach-exynos/exynos.c
View File

@ -211,7 +211,7 @@ static void __init exynos_dt_machine_init(void)
if (!IS_ENABLED(CONFIG_SMP))
exynos_sysram_init();
#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE)
if (of_machine_is_compatible("samsung,exynos4210"))
exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
#endif

3
arch/arm/mach-exynos/platsmp.c
View File

@ -126,8 +126,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
*/
void exynos_cpu_power_down(int cpu)
{
if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") ||
of_machine_is_compatible("samsung,exynos5800"))) {
if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
/*
* Bypass power down for CPU0 during suspend. Check for
* the SYS_PWR_REG value to decide if we are suspending

2
arch/arm/mach-exynos/pm.c
View File

@ -181,6 +181,7 @@ void exynos_enter_aftr(void)
cpu_pm_exit();
}
#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE)
static atomic_t cpu1_wakeup = ATOMIC_INIT(0);
static int exynos_cpu0_enter_aftr(void)
@ -302,3 +303,4 @@ struct cpuidle_exynos_data cpuidle_coupled_exynos_data = {
.pre_enter_aftr = exynos_pre_enter_aftr,
.post_enter_aftr = exynos_post_enter_aftr,
};
#endif /* CONFIG_SMP && CONFIG_ARM_EXYNOS_CPUIDLE */

28
arch/arm/mach-exynos/pm_domains.c
View File

@ -161,6 +161,34 @@ no_clk:
of_genpd_add_provider_simple(np, &pd->pd);
}
/* Assign the child power domains to their parents */
for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
struct generic_pm_domain *child_domain, *parent_domain;
struct of_phandle_args args;
args.np = np;
args.args_count = 0;
child_domain = of_genpd_get_from_provider(&args);
if (!child_domain)
continue;
if (of_parse_phandle_with_args(np, "power-domains",
"#power-domain-cells", 0, &args) != 0)
continue;
parent_domain = of_genpd_get_from_provider(&args);
if (!parent_domain)
continue;
if (pm_genpd_add_subdomain(parent_domain, child_domain))
pr_warn("%s failed to add subdomain: %s\n",
parent_domain->name, child_domain->name);
else
pr_info("%s has as child subdomain: %s.\n",
parent_domain->name, child_domain->name);
of_node_put(np);
}
return 0;
}
arch_initcall(exynos4_pm_init_power_domain);

4
arch/arm/mach-exynos/suspend.c
View File

@ -87,8 +87,8 @@ static unsigned int exynos_pmu_spare3;
static u32 exynos_irqwake_intmask = 0xffffffff;
static const struct exynos_wkup_irq exynos3250_wkup_irq[] = {
{ 73, BIT(1) }, /* RTC alarm */
{ 74, BIT(2) }, /* RTC tick */
{ 105, BIT(1) }, /* RTC alarm */
{ 106, BIT(2) }, /* RTC tick */
{ /* sentinel */ },
};

5
arch/arm/mach-imx/mach-imx6q.c
View File

@ -211,8 +211,9 @@ static void __init imx6q_1588_init(void)
* set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad
* (external OSC), and we need to clear the bit.
*/
clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
IMX6Q_GPR1_ENET_CLK_SEL_PAD;
clksel = clk_is_match(ptp_clk, enet_ref) ?
IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
IMX6Q_GPR1_ENET_CLK_SEL_PAD;
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
if (!IS_ERR(gpr))
regmap_update_bits(gpr, IOMUXC_GPR1,

8
arch/arm/mach-msm/board-halibut.c
View File

@ -20,6 +20,7 @@
#include <linux/input.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -46,15 +47,20 @@ static struct resource smc91x_resources[] = {
[1] = {
.start = MSM_GPIO_TO_INT(49),
.end = MSM_GPIO_TO_INT(49),
.flags = IORESOURCE_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct smc91x_platdata smc91x_platdata = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev.platform_data = &smc91x_platdata,
};
static struct platform_device *devices[] __initdata = {

8
arch/arm/mach-msm/board-qsd8x50.c
View File

@ -22,6 +22,7 @@
#include <linux/usb/msm_hsusb.h>
#include <linux/err.h>
#include <linux/clkdev.h>
#include <linux/smc91x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -49,15 +50,20 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.flags = IORESOURCE_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct smc91x_platdata smc91x_platdata = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev.platform_data = &smc91x_platdata,
};
static int __init msm_init_smc91x(void)

16
arch/arm/mach-mvebu/pmsu.c
View File

@ -415,6 +415,9 @@ static __init int armada_38x_cpuidle_init(void)
void __iomem *mpsoc_base;
u32 reg;
pr_warn("CPU idle is currently broken on Armada 38x: disabling");
return 0;
np = of_find_compatible_node(NULL, NULL,
"marvell,armada-380-coherency-fabric");
if (!np)
@ -476,6 +479,16 @@ static int __init mvebu_v7_cpu_pm_init(void)
return 0;
of_node_put(np);
/*
* Currently the CPU idle support for Armada 38x is broken, as
* the CPU hotplug uses some of the CPU idle functions it is
* broken too, so let's disable it
*/
if (of_machine_is_compatible("marvell,armada380")) {
cpu_hotplug_disable();
pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling");
}
if (of_machine_is_compatible("marvell,armadaxp"))
ret = armada_xp_cpuidle_init();
else if (of_machine_is_compatible("marvell,armada370"))
@ -489,7 +502,8 @@ static int __init mvebu_v7_cpu_pm_init(void)
return ret;
mvebu_v7_pmsu_enable_l2_powerdown_onidle();
platform_device_register(&mvebu_v7_cpuidle_device);
if (mvebu_v7_cpuidle_device.name)
platform_device_register(&mvebu_v7_cpuidle_device);
cpu_pm_register_notifier(&mvebu_v7_cpu_pm_notifier);
return 0;

2
arch/arm/mach-omap2/id.c
View File

@ -720,6 +720,8 @@ static const char * __init omap_get_family(void)
return kasprintf(GFP_KERNEL, "OMAP4");
else if (soc_is_omap54xx())
return kasprintf(GFP_KERNEL, "OMAP5");
else if (soc_is_am33xx() || soc_is_am335x())
return kasprintf(GFP_KERNEL, "AM33xx");
else if (soc_is_am43xx())
return kasprintf(GFP_KERNEL, "AM43xx");
else if (soc_is_dra7xx())

10
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -1692,16 +1692,15 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
if (ret == -EBUSY)
pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);
if (!ret) {
if (oh->clkdm) {
/*
* Set the clockdomain to HW_AUTO, assuming that the
* previous state was HW_AUTO.
*/
if (oh->clkdm && hwsup)
if (hwsup)
clkdm_allow_idle(oh->clkdm);
} else {
if (oh->clkdm)
clkdm_hwmod_disable(oh->clkdm, oh);
clkdm_hwmod_disable(oh->clkdm, oh);
}
return ret;
@ -2698,6 +2697,7 @@ static int __init _register(struct omap_hwmod *oh)
INIT_LIST_HEAD(&oh->master_ports);
INIT_LIST_HEAD(&oh->slave_ports);
spin_lock_init(&oh->_lock);
lockdep_set_class(&oh->_lock, &oh->hwmod_key);
oh->_state = _HWMOD_STATE_REGISTERED;

Some files were not shown because too many files have changed in this diff Show More