From 1dd5ddc125b4625c3beb8e644ae872445d739bbc Mon Sep 17 00:00:00 2001 From: "Sergei A. Trusov" Date: Thu, 5 Mar 2020 19:53:06 -0800 Subject: [PATCH 01/26] Input: goodix - fix touch coordinates on Cube I15-TC The touchscreen on the Cube I15-TC don't match the default display, with 0,0 touches being reported when touching at the top-right of the screen. Add a quirk to invert the x coordinate. Reported-and-tested-by: Arkadiy Signed-off-by: Sergei A. Trusov Reviewed-by: Bastien Nocera Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 0403102e807e..37b35ab97beb 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -168,6 +168,22 @@ static const struct dmi_system_id nine_bytes_report[] = { {} }; +/* + * Those tablets have their x coordinate inverted + */ +static const struct dmi_system_id inverted_x_screen[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) + { + .ident = "Cube I15-TC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Cube"), + DMI_MATCH(DMI_PRODUCT_NAME, "I15-TC") + }, + }, +#endif + {} +}; + /** * goodix_i2c_read - read data from a register of the i2c slave device. * @@ -780,6 +796,12 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) "Non-standard 9-bytes report format quirk\n"); } + if (dmi_check_system(inverted_x_screen)) { + ts->prop.invert_x = true; + dev_dbg(&ts->client->dev, + "Applying 'inverted x screen' quirk\n"); + } + error = input_mt_init_slots(ts->input_dev, ts->max_touch_num, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); if (error) { From 061706716384f1633d3d5090b22a99f33f1fcf2f Mon Sep 17 00:00:00 2001 From: Johnny Chuang Date: Fri, 6 Mar 2020 10:05:20 -0800 Subject: [PATCH 02/26] Input: elants_i2c - report resolution information for touch major This patch supports reporting resolution for ABS_MT_TOUCH_MAJOR event. This information is needed in showing pressure/width radius. Signed-off-by: Johnny Chuang Reviewed-by: Harry Cutts Reviewed-by: Peter Hutterer Acked-by: Benjamin Tissoires Link: https://lore.kernel.org/r/1582766000-23023-1-git-send-email-johnny.chuang.emc@gmail.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/elants_i2c.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 491179967b29..14c577c16b16 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -1309,6 +1309,7 @@ static int elants_i2c_probe(struct i2c_client *client, input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0); input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res); input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res); + input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1); error = input_register_device(ts->input); if (error) { From 49db3997d82fe51655d75944fa68a08143782a5d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:12:10 -0700 Subject: [PATCH 03/26] Input: goodix - refactor IRQ pin GPIO accesses Suspending Goodix touchscreens requires changing the interrupt pin to output before sending them a power-down command. Followed by wiggling the interrupt pin to wake the device up, after which it is put back in input mode. So far we have only effectively supported this on devices which use devicetree. On X86 ACPI platforms both looking up the pins; and using a pin as both IRQ and GPIO is a bit more complicated. E.g. on some devices we cannot directly access the IRQ pin as GPIO and we need to call ACPI methods to control it instead. This commit adds a new irq_pin_access_method field to the goodix_chip_data struct and adds goodix_irq_direction_output and goodix_irq_direction_input helpers which together abstract the GPIO accesses to the IRQ pin. This is a preparation patch for adding support for properly suspending the touchscreen on X86 ACPI platforms. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Signed-off-by: Hans de Goede Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/20200307121505.3707-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 62 ++++++++++++++++++++++++------ 1 file changed, 51 insertions(+), 11 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 37b35ab97beb..f5e2e0956d74 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -31,6 +31,11 @@ struct goodix_ts_data; +enum goodix_irq_pin_access_method { + IRQ_PIN_ACCESS_NONE, + IRQ_PIN_ACCESS_GPIO, +}; + struct goodix_chip_data { u16 config_addr; int config_len; @@ -53,6 +58,7 @@ struct goodix_ts_data { const char *cfg_name; struct completion firmware_loading_complete; unsigned long irq_flags; + enum goodix_irq_pin_access_method irq_pin_access_method; unsigned int contact_size; }; @@ -518,17 +524,48 @@ static int goodix_send_cfg(struct goodix_ts_data *ts, return 0; } +static int goodix_irq_direction_output(struct goodix_ts_data *ts, + int value) +{ + switch (ts->irq_pin_access_method) { + case IRQ_PIN_ACCESS_NONE: + dev_err(&ts->client->dev, + "%s called without an irq_pin_access_method set\n", + __func__); + return -EINVAL; + case IRQ_PIN_ACCESS_GPIO: + return gpiod_direction_output(ts->gpiod_int, value); + } + + return -EINVAL; /* Never reached */ +} + +static int goodix_irq_direction_input(struct goodix_ts_data *ts) +{ + switch (ts->irq_pin_access_method) { + case IRQ_PIN_ACCESS_NONE: + dev_err(&ts->client->dev, + "%s called without an irq_pin_access_method set\n", + __func__); + return -EINVAL; + case IRQ_PIN_ACCESS_GPIO: + return gpiod_direction_input(ts->gpiod_int); + } + + return -EINVAL; /* Never reached */ +} + static int goodix_int_sync(struct goodix_ts_data *ts) { int error; - error = gpiod_direction_output(ts->gpiod_int, 0); + error = goodix_irq_direction_output(ts, 0); if (error) return error; msleep(50); /* T5: 50ms */ - error = gpiod_direction_input(ts->gpiod_int); + error = goodix_irq_direction_input(ts); if (error) return error; @@ -552,7 +589,7 @@ static int goodix_reset(struct goodix_ts_data *ts) msleep(20); /* T2: > 10ms */ /* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */ - error = gpiod_direction_output(ts->gpiod_int, ts->client->addr == 0x14); + error = goodix_irq_direction_output(ts, ts->client->addr == 0x14); if (error) return error; @@ -633,6 +670,9 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) ts->gpiod_rst = gpiod; + if (ts->gpiod_int && ts->gpiod_rst) + ts->irq_pin_access_method = IRQ_PIN_ACCESS_GPIO; + return 0; } @@ -911,7 +951,7 @@ static int goodix_ts_probe(struct i2c_client *client, if (error) return error; - if (ts->gpiod_int && ts->gpiod_rst) { + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) { /* reset the controller */ error = goodix_reset(ts); if (error) { @@ -934,7 +974,7 @@ static int goodix_ts_probe(struct i2c_client *client, ts->chip = goodix_get_chip_data(ts->id); - if (ts->gpiod_int && ts->gpiod_rst) { + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) { /* update device config */ ts->cfg_name = devm_kasprintf(&client->dev, GFP_KERNEL, "goodix_%d_cfg.bin", ts->id); @@ -965,7 +1005,7 @@ static int goodix_ts_remove(struct i2c_client *client) { struct goodix_ts_data *ts = i2c_get_clientdata(client); - if (ts->gpiod_int && ts->gpiod_rst) + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) wait_for_completion(&ts->firmware_loading_complete); return 0; @@ -978,7 +1018,7 @@ static int __maybe_unused goodix_suspend(struct device *dev) int error; /* We need gpio pins to suspend/resume */ - if (!ts->gpiod_int || !ts->gpiod_rst) { + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { disable_irq(client->irq); return 0; } @@ -989,7 +1029,7 @@ static int __maybe_unused goodix_suspend(struct device *dev) goodix_free_irq(ts); /* Output LOW on the INT pin for 5 ms */ - error = gpiod_direction_output(ts->gpiod_int, 0); + error = goodix_irq_direction_output(ts, 0); if (error) { goodix_request_irq(ts); return error; @@ -1001,7 +1041,7 @@ static int __maybe_unused goodix_suspend(struct device *dev) GOODIX_CMD_SCREEN_OFF); if (error) { dev_err(&ts->client->dev, "Screen off command failed\n"); - gpiod_direction_input(ts->gpiod_int); + goodix_irq_direction_input(ts); goodix_request_irq(ts); return -EAGAIN; } @@ -1021,7 +1061,7 @@ static int __maybe_unused goodix_resume(struct device *dev) struct goodix_ts_data *ts = i2c_get_clientdata(client); int error; - if (!ts->gpiod_int || !ts->gpiod_rst) { + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { enable_irq(client->irq); return 0; } @@ -1030,7 +1070,7 @@ static int __maybe_unused goodix_resume(struct device *dev) * Exit sleep mode by outputting HIGH level to INT pin * for 2ms~5ms. */ - error = gpiod_direction_output(ts->gpiod_int, 1); + error = goodix_irq_direction_output(ts, 1); if (error) return error; From e070a97b929b58b60d54ae924fe0469a1c7dab73 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:12:35 -0700 Subject: [PATCH 04/26] Input: goodix - make loading the config from disk independent from the GPIO setup At least on X86 ACPI platforms it is not necessary to load the touchscreen controller config from disk, if it needs to be loaded this has already been done by the BIOS / UEFI firmware. Even on other (e.g. devicetree) platforms the config-loading as currently done has the issue that the loaded cfg file is based on the controller model, but the actual cfg is device specific, so the cfg files are not part of linux-firmware and this can only work with a device specific OS image which includes the cfg file. And we do not need access to the GPIOs at all to load the config, if we do not have access we can still load the config. So all in all tying the decision to try to load the config from disk to being able to access the GPIOs is not desirable. This commit adds a new load_cfg_from_disk boolean to control the firmware loading instead. This commits sets the new bool to true when we set irq_pin_access_method to IRQ_PIN_ACCESS_GPIO, so there are no functional changes. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200307121505.3707-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index f5e2e0956d74..cb294615b060 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -56,6 +56,7 @@ struct goodix_ts_data { u16 id; u16 version; const char *cfg_name; + bool load_cfg_from_disk; struct completion firmware_loading_complete; unsigned long irq_flags; enum goodix_irq_pin_access_method irq_pin_access_method; @@ -670,8 +671,10 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) ts->gpiod_rst = gpiod; - if (ts->gpiod_int && ts->gpiod_rst) + if (ts->gpiod_int && ts->gpiod_rst) { + ts->load_cfg_from_disk = true; ts->irq_pin_access_method = IRQ_PIN_ACCESS_GPIO; + } return 0; } @@ -974,7 +977,7 @@ static int goodix_ts_probe(struct i2c_client *client, ts->chip = goodix_get_chip_data(ts->id); - if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) { + if (ts->load_cfg_from_disk) { /* update device config */ ts->cfg_name = devm_kasprintf(&client->dev, GFP_KERNEL, "goodix_%d_cfg.bin", ts->id); @@ -1005,7 +1008,7 @@ static int goodix_ts_remove(struct i2c_client *client) { struct goodix_ts_data *ts = i2c_get_clientdata(client); - if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) + if (ts->load_cfg_from_disk) wait_for_completion(&ts->firmware_loading_complete); return 0; @@ -1017,14 +1020,15 @@ static int __maybe_unused goodix_suspend(struct device *dev) struct goodix_ts_data *ts = i2c_get_clientdata(client); int error; + if (ts->load_cfg_from_disk) + wait_for_completion(&ts->firmware_loading_complete); + /* We need gpio pins to suspend/resume */ if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { disable_irq(client->irq); return 0; } - wait_for_completion(&ts->firmware_loading_complete); - /* Free IRQ as IRQ pin is used as output in the suspend sequence */ goodix_free_irq(ts); From 1921dacef72d5c1fd6a63bfffba3997f34935e7f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:23:04 -0700 Subject: [PATCH 05/26] Input: goodix - make resetting the controller at probe independent from the GPIO setup Before this commit we would always reset the controller at probe when we have access to the GPIOs which are necessary to do a reset. Doing the reset requires access to the GPIOs, but just because we have access to the GPIOs does not mean that we should always reset the controller at probe. On X86 ACPI platforms the BIOS / UEFI firmware will already have reset the controller and it will have loaded the device specific config into the controller. Doing the reset sometimes causes the controller to lose its configuration, so on X86 ACPI platforms this is not a good idea. This commit adds a new reset_controller_at_probe boolean to control the reset at probe behavior. This commits sets the new bool to true when we set irq_pin_access_method to IRQ_PIN_ACCESS_GPIO, so there are no functional changes. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200307121505.3707-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index cb294615b060..70212ea7c631 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -56,6 +56,7 @@ struct goodix_ts_data { u16 id; u16 version; const char *cfg_name; + bool reset_controller_at_probe; bool load_cfg_from_disk; struct completion firmware_loading_complete; unsigned long irq_flags; @@ -672,6 +673,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) ts->gpiod_rst = gpiod; if (ts->gpiod_int && ts->gpiod_rst) { + ts->reset_controller_at_probe = true; ts->load_cfg_from_disk = true; ts->irq_pin_access_method = IRQ_PIN_ACCESS_GPIO; } @@ -954,7 +956,7 @@ static int goodix_ts_probe(struct i2c_client *client, if (error) return error; - if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) { + if (ts->reset_controller_at_probe) { /* reset the controller */ error = goodix_reset(ts); if (error) { From a7d4b171660cadd0b410be132759267731da11bb Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:23:21 -0700 Subject: [PATCH 06/26] Input: goodix - add support for getting IRQ + reset GPIOs on Cherry Trail devices On most Cherry Trail (x86, UEFI + ACPI) devices the ACPI tables do not have a _DSD with a "daffd814-6eba-4d8c-8a91-bc9bbf4aa301" UUID, adding "irq-gpios" and "reset-gpios" mappings, so we cannot get the GPIOS by name without first manually adding mappings ourselves. These devices contain 1 GpioInt and 1 GpioIo resource in their _CRS table: Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { I2cSerialBusV2 (0x0014, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C2", 0x00, ResourceConsumer, , Exclusive, ) GpioInt (Edge, ActiveLow, Shared, PullDefault, 0x0000, "\\_SB.GPO1", 0x00, ResourceConsumer, , ) { // Pin list 0x0013 } GpioIo (Shared, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO1", 0x00, ResourceConsumer, , ) { // Pin list 0x0019 } }) Return (RBUF) /* \_SB_.PCI0.I2C2.TCS1._CRS.RBUF */ } There is no fixed order for these 2. This commit adds code to check that there is 1 of each as expected and then registers a mapping matching their order using devm_acpi_dev_add_driver_gpios(). This gives us access to both GPIOs allowing us to properly suspend the controller during suspend, and making it possible to reset the controller if necessary. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Signed-off-by: Hans de Goede Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/20200307121505.3707-4-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 128 ++++++++++++++++++++++++++++- 1 file changed, 124 insertions(+), 4 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 70212ea7c631..f7af5409f31c 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -34,6 +34,7 @@ struct goodix_ts_data; enum goodix_irq_pin_access_method { IRQ_PIN_ACCESS_NONE, IRQ_PIN_ACCESS_GPIO, + IRQ_PIN_ACCESS_ACPI_GPIO, }; struct goodix_chip_data { @@ -53,6 +54,8 @@ struct goodix_ts_data { struct regulator *vddio; struct gpio_desc *gpiod_int; struct gpio_desc *gpiod_rst; + int gpio_count; + int gpio_int_idx; u16 id; u16 version; const char *cfg_name; @@ -537,6 +540,12 @@ static int goodix_irq_direction_output(struct goodix_ts_data *ts, return -EINVAL; case IRQ_PIN_ACCESS_GPIO: return gpiod_direction_output(ts->gpiod_int, value); + case IRQ_PIN_ACCESS_ACPI_GPIO: + /* + * The IRQ pin triggers on a falling edge, so its gets marked + * as active-low, use output_raw to avoid the value inversion. + */ + return gpiod_direction_output_raw(ts->gpiod_int, value); } return -EINVAL; /* Never reached */ @@ -551,6 +560,7 @@ static int goodix_irq_direction_input(struct goodix_ts_data *ts) __func__); return -EINVAL; case IRQ_PIN_ACCESS_GPIO: + case IRQ_PIN_ACCESS_ACPI_GPIO: return gpiod_direction_input(ts->gpiod_int); } @@ -615,6 +625,94 @@ static int goodix_reset(struct goodix_ts_data *ts) return 0; } +#if defined CONFIG_X86 && defined CONFIG_ACPI +static const struct acpi_gpio_params first_gpio = { 0, 0, false }; +static const struct acpi_gpio_params second_gpio = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_goodix_int_first_gpios[] = { + { GOODIX_GPIO_INT_NAME "-gpios", &first_gpio, 1 }, + { GOODIX_GPIO_RST_NAME "-gpios", &second_gpio, 1 }, + { }, +}; + +static const struct acpi_gpio_mapping acpi_goodix_int_last_gpios[] = { + { GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 }, + { GOODIX_GPIO_INT_NAME "-gpios", &second_gpio, 1 }, + { }, +}; + +static int goodix_resource(struct acpi_resource *ares, void *data) +{ + struct goodix_ts_data *ts = data; + struct device *dev = &ts->client->dev; + struct acpi_resource_gpio *gpio; + + switch (ares->type) { + case ACPI_RESOURCE_TYPE_GPIO: + gpio = &ares->data.gpio; + if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) { + if (ts->gpio_int_idx == -1) { + ts->gpio_int_idx = ts->gpio_count; + } else { + dev_err(dev, "More then one GpioInt resource, ignoring ACPI GPIO resources\n"); + ts->gpio_int_idx = -2; + } + } + ts->gpio_count++; + break; + default: + break; + } + + return 0; +} + +/* + * This function gets called in case we fail to get the irq GPIO directly + * because the ACPI tables lack GPIO-name to APCI _CRS index mappings + * (no _DSD UUID daffd814-6eba-4d8c-8a91-bc9bbf4aa301 data). + * In that case we add our own mapping and then goodix_get_gpio_config() + * retries to get the GPIOs based on the added mapping. + */ +static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) +{ + const struct acpi_gpio_mapping *gpio_mapping = NULL; + struct device *dev = &ts->client->dev; + LIST_HEAD(resources); + int ret; + + ts->gpio_count = 0; + ts->gpio_int_idx = -1; + ret = acpi_dev_get_resources(ACPI_COMPANION(dev), &resources, + goodix_resource, ts); + if (ret < 0) { + dev_err(dev, "Error getting ACPI resources: %d\n", ret); + return ret; + } + + acpi_dev_free_resource_list(&resources); + + if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) { + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; + gpio_mapping = acpi_goodix_int_first_gpios; + } else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) { + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; + gpio_mapping = acpi_goodix_int_last_gpios; + } else { + dev_warn(dev, "Unexpected ACPI resources: gpio_count %d, gpio_int_idx %d\n", + ts->gpio_count, ts->gpio_int_idx); + return -EINVAL; + } + + return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping); +} +#else +static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) +{ + return -EINVAL; +} +#endif /* CONFIG_X86 && CONFIG_ACPI */ + /** * goodix_get_gpio_config - Get GPIO config from ACPI/DT * @@ -625,6 +723,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) int error; struct device *dev; struct gpio_desc *gpiod; + bool added_acpi_mappings = false; if (!ts->client) return -EINVAL; @@ -648,6 +747,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) return error; } +retry_get_irq_gpio: /* Get the interrupt GPIO pin number */ gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN); if (IS_ERR(gpiod)) { @@ -657,6 +757,11 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) GOODIX_GPIO_INT_NAME, error); return error; } + if (!gpiod && has_acpi_companion(dev) && !added_acpi_mappings) { + added_acpi_mappings = true; + if (goodix_add_acpi_gpio_mappings(ts) == 0) + goto retry_get_irq_gpio; + } ts->gpiod_int = gpiod; @@ -672,10 +777,25 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) ts->gpiod_rst = gpiod; - if (ts->gpiod_int && ts->gpiod_rst) { - ts->reset_controller_at_probe = true; - ts->load_cfg_from_disk = true; - ts->irq_pin_access_method = IRQ_PIN_ACCESS_GPIO; + switch (ts->irq_pin_access_method) { + case IRQ_PIN_ACCESS_ACPI_GPIO: + /* + * We end up here if goodix_add_acpi_gpio_mappings() has + * called devm_acpi_dev_add_driver_gpios() because the ACPI + * tables did not contain name to index mappings. + * Check that we successfully got both GPIOs after we've + * added our own acpi_gpio_mapping and if we did not get both + * GPIOs reset irq_pin_access_method to IRQ_PIN_ACCESS_NONE. + */ + if (!ts->gpiod_int || !ts->gpiod_rst) + ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE; + break; + default: + if (ts->gpiod_int && ts->gpiod_rst) { + ts->reset_controller_at_probe = true; + ts->load_cfg_from_disk = true; + ts->irq_pin_access_method = IRQ_PIN_ACCESS_GPIO; + } } return 0; From 67abd9eeb458f3d4f2bbc250e9d4d796fa18f26c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:23:35 -0700 Subject: [PATCH 07/26] Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices On most Bay Trail (x86, UEFI + ACPI) devices the ACPI tables do not have a _DSD with a "daffd814-6eba-4d8c-8a91-bc9bbf4aa301" UUID, adding "irq-gpios" and "reset-gpios" mappings, so we cannot get the GPIOS by name without first manually adding mappings ourselves. These devices contain 2 GpioIo resource in their _CRS table, on all 4 such devices which I have access to, the order of the 2 GPIOs is reset, int. Note that the GPIO to which the touchscreen controller irq pin is connected is configured in direct-irq mode on these Bay Trail devices, the pinctrl-baytrail.c driver still allows controlling the pin as a GPIO in this case, but this is not necessarily the case on other X86 ACPI platforms, nor do we have a guarantee that the GPIO order is the same elsewhere, so we limit the use of a _CRS table with 2 GpioIo resources to Bay Trail devices only. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200307121505.3707-5-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index f7af5409f31c..37862f7dfde3 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -626,6 +626,21 @@ static int goodix_reset(struct goodix_ts_data *ts) } #if defined CONFIG_X86 && defined CONFIG_ACPI +#include +#include + +static const struct x86_cpu_id baytrail_cpu_ids[] = { + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, X86_FEATURE_ANY, }, + {} +}; + +static inline bool is_byt(void) +{ + const struct x86_cpu_id *id = x86_match_cpu(baytrail_cpu_ids); + + return !!id; +} + static const struct acpi_gpio_params first_gpio = { 0, 0, false }; static const struct acpi_gpio_params second_gpio = { 1, 0, false }; @@ -698,6 +713,10 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) } else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) { ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; gpio_mapping = acpi_goodix_int_last_gpios; + } else if (is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) { + dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n"); + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; + gpio_mapping = acpi_goodix_int_last_gpios; } else { dev_warn(dev, "Unexpected ACPI resources: gpio_count %d, gpio_int_idx %d\n", ts->gpio_count, ts->gpio_int_idx); From c5fca485320e83b1bb964ad5559ec20f14c943be Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:24:31 -0700 Subject: [PATCH 08/26] Input: goodix - add support for controlling the IRQ pin through ACPI methods Some Apollo Lake (x86, UEFI + ACPI) devices only list the reset GPIO in their _CRS table and the bit-banging of the IRQ line necessary to wake-up the controller from suspend can be done by calling 2 Goodix custom / specific ACPI methods. This commit adds support for controlling the IRQ line in this matter, allowing us to properly suspend the touchscreen controller on such devices. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200307121505.3707-6-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 37862f7dfde3..8e31b4bc6275 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -35,6 +35,7 @@ enum goodix_irq_pin_access_method { IRQ_PIN_ACCESS_NONE, IRQ_PIN_ACCESS_GPIO, IRQ_PIN_ACCESS_ACPI_GPIO, + IRQ_PIN_ACCESS_ACPI_METHOD, }; struct goodix_chip_data { @@ -532,6 +533,9 @@ static int goodix_send_cfg(struct goodix_ts_data *ts, static int goodix_irq_direction_output(struct goodix_ts_data *ts, int value) { + struct device *dev = &ts->client->dev; + acpi_status status; + switch (ts->irq_pin_access_method) { case IRQ_PIN_ACCESS_NONE: dev_err(&ts->client->dev, @@ -546,6 +550,10 @@ static int goodix_irq_direction_output(struct goodix_ts_data *ts, * as active-low, use output_raw to avoid the value inversion. */ return gpiod_direction_output_raw(ts->gpiod_int, value); + case IRQ_PIN_ACCESS_ACPI_METHOD: + status = acpi_execute_simple_method(ACPI_HANDLE(dev), + "INTO", value); + return ACPI_SUCCESS(status) ? 0 : -EIO; } return -EINVAL; /* Never reached */ @@ -553,6 +561,9 @@ static int goodix_irq_direction_output(struct goodix_ts_data *ts, static int goodix_irq_direction_input(struct goodix_ts_data *ts) { + struct device *dev = &ts->client->dev; + acpi_status status; + switch (ts->irq_pin_access_method) { case IRQ_PIN_ACCESS_NONE: dev_err(&ts->client->dev, @@ -562,6 +573,10 @@ static int goodix_irq_direction_input(struct goodix_ts_data *ts) case IRQ_PIN_ACCESS_GPIO: case IRQ_PIN_ACCESS_ACPI_GPIO: return gpiod_direction_input(ts->gpiod_int); + case IRQ_PIN_ACCESS_ACPI_METHOD: + status = acpi_evaluate_object(ACPI_HANDLE(dev), "INTI", + NULL, NULL); + return ACPI_SUCCESS(status) ? 0 : -EIO; } return -EINVAL; /* Never reached */ @@ -656,6 +671,11 @@ static const struct acpi_gpio_mapping acpi_goodix_int_last_gpios[] = { { }, }; +static const struct acpi_gpio_mapping acpi_goodix_reset_only_gpios[] = { + { GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 }, + { }, +}; + static int goodix_resource(struct acpi_resource *ares, void *data) { struct goodix_ts_data *ts = data; @@ -713,6 +733,12 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) } else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) { ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; gpio_mapping = acpi_goodix_int_last_gpios; + } else if (ts->gpio_count == 1 && ts->gpio_int_idx == -1 && + acpi_has_method(ACPI_HANDLE(dev), "INTI") && + acpi_has_method(ACPI_HANDLE(dev), "INTO")) { + dev_info(dev, "Using ACPI INTI and INTO methods for IRQ pin access\n"); + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_METHOD; + gpio_mapping = acpi_goodix_reset_only_gpios; } else if (is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) { dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n"); ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; @@ -809,6 +835,10 @@ retry_get_irq_gpio: if (!ts->gpiod_int || !ts->gpiod_rst) ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE; break; + case IRQ_PIN_ACCESS_ACPI_METHOD: + if (!ts->gpiod_rst) + ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE; + break; default: if (ts->gpiod_int && ts->gpiod_rst) { ts->reset_controller_at_probe = true; From aebfc52c09499eb3885aa352bb17b103109b73df Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:29:10 -0700 Subject: [PATCH 09/26] Input: goodix - move defines to above struct goodix_ts_data declaration Move the defines to above the struct goodix_ts_data declaration, so that the MAX defines can be used inside the struct goodix_ts_data declaration. No functional changes, just moving a block of code. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200307121505.3707-7-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 60 +++++++++++++++--------------- 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 8e31b4bc6275..e03ecaf7b822 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -29,6 +29,36 @@ #include #include +#define GOODIX_GPIO_INT_NAME "irq" +#define GOODIX_GPIO_RST_NAME "reset" + +#define GOODIX_MAX_HEIGHT 4096 +#define GOODIX_MAX_WIDTH 4096 +#define GOODIX_INT_TRIGGER 1 +#define GOODIX_CONTACT_SIZE 8 +#define GOODIX_MAX_CONTACT_SIZE 9 +#define GOODIX_MAX_CONTACTS 10 + +#define GOODIX_CONFIG_MAX_LENGTH 240 +#define GOODIX_CONFIG_911_LENGTH 186 +#define GOODIX_CONFIG_967_LENGTH 228 + +/* Register defines */ +#define GOODIX_REG_COMMAND 0x8040 +#define GOODIX_CMD_SCREEN_OFF 0x05 + +#define GOODIX_READ_COOR_ADDR 0x814E +#define GOODIX_GT1X_REG_CONFIG_DATA 0x8050 +#define GOODIX_GT9X_REG_CONFIG_DATA 0x8047 +#define GOODIX_REG_ID 0x8140 + +#define GOODIX_BUFFER_STATUS_READY BIT(7) +#define GOODIX_BUFFER_STATUS_TIMEOUT 20 + +#define RESOLUTION_LOC 1 +#define MAX_CONTACTS_LOC 5 +#define TRIGGER_LOC 6 + struct goodix_ts_data; enum goodix_irq_pin_access_method { @@ -68,36 +98,6 @@ struct goodix_ts_data { unsigned int contact_size; }; -#define GOODIX_GPIO_INT_NAME "irq" -#define GOODIX_GPIO_RST_NAME "reset" - -#define GOODIX_MAX_HEIGHT 4096 -#define GOODIX_MAX_WIDTH 4096 -#define GOODIX_INT_TRIGGER 1 -#define GOODIX_CONTACT_SIZE 8 -#define GOODIX_MAX_CONTACT_SIZE 9 -#define GOODIX_MAX_CONTACTS 10 - -#define GOODIX_CONFIG_MAX_LENGTH 240 -#define GOODIX_CONFIG_911_LENGTH 186 -#define GOODIX_CONFIG_967_LENGTH 228 - -/* Register defines */ -#define GOODIX_REG_COMMAND 0x8040 -#define GOODIX_CMD_SCREEN_OFF 0x05 - -#define GOODIX_READ_COOR_ADDR 0x814E -#define GOODIX_GT1X_REG_CONFIG_DATA 0x8050 -#define GOODIX_GT9X_REG_CONFIG_DATA 0x8047 -#define GOODIX_REG_ID 0x8140 - -#define GOODIX_BUFFER_STATUS_READY BIT(7) -#define GOODIX_BUFFER_STATUS_TIMEOUT 20 - -#define RESOLUTION_LOC 1 -#define MAX_CONTACTS_LOC 5 -#define TRIGGER_LOC 6 - static int goodix_check_cfg_8(struct goodix_ts_data *ts, const struct firmware *cfg); static int goodix_check_cfg_16(struct goodix_ts_data *ts, From de956caed952c7b07a5a7137037f735bd42050ca Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:29:26 -0700 Subject: [PATCH 10/26] Input: goodix - save a copy of the config from goodix_read_config() Save a copy of the config in goodix_read_config(), this is a preparation patch for restoring the config if it was lost after a supend/resume cycle. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200307121505.3707-8-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 47 ++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 6 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index e03ecaf7b822..7e318938b723 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -72,6 +72,7 @@ struct goodix_chip_data { u16 config_addr; int config_len; int (*check_config)(struct goodix_ts_data *, const struct firmware *); + void (*calc_config_checksum)(struct goodix_ts_data *ts); }; struct goodix_ts_data { @@ -96,35 +97,42 @@ struct goodix_ts_data { unsigned long irq_flags; enum goodix_irq_pin_access_method irq_pin_access_method; unsigned int contact_size; + u8 config[GOODIX_CONFIG_MAX_LENGTH]; }; static int goodix_check_cfg_8(struct goodix_ts_data *ts, const struct firmware *cfg); static int goodix_check_cfg_16(struct goodix_ts_data *ts, const struct firmware *cfg); +static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts); +static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts); static const struct goodix_chip_data gt1x_chip_data = { .config_addr = GOODIX_GT1X_REG_CONFIG_DATA, .config_len = GOODIX_CONFIG_MAX_LENGTH, .check_config = goodix_check_cfg_16, + .calc_config_checksum = goodix_calc_cfg_checksum_16, }; static const struct goodix_chip_data gt911_chip_data = { .config_addr = GOODIX_GT9X_REG_CONFIG_DATA, .config_len = GOODIX_CONFIG_911_LENGTH, .check_config = goodix_check_cfg_8, + .calc_config_checksum = goodix_calc_cfg_checksum_8, }; static const struct goodix_chip_data gt967_chip_data = { .config_addr = GOODIX_GT9X_REG_CONFIG_DATA, .config_len = GOODIX_CONFIG_967_LENGTH, .check_config = goodix_check_cfg_8, + .calc_config_checksum = goodix_calc_cfg_checksum_8, }; static const struct goodix_chip_data gt9x_chip_data = { .config_addr = GOODIX_GT9X_REG_CONFIG_DATA, .config_len = GOODIX_CONFIG_MAX_LENGTH, .check_config = goodix_check_cfg_8, + .calc_config_checksum = goodix_calc_cfg_checksum_8, }; static const unsigned long goodix_irq_flags[] = { @@ -458,6 +466,19 @@ static int goodix_check_cfg_8(struct goodix_ts_data *ts, return 0; } +static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts) +{ + int i, raw_cfg_len = ts->chip->config_len - 2; + u8 check_sum = 0; + + for (i = 0; i < raw_cfg_len; i++) + check_sum += ts->config[i]; + check_sum = (~check_sum) + 1; + + ts->config[raw_cfg_len] = check_sum; + ts->config[raw_cfg_len + 1] = 1; /* Set "config_fresh" bit */ +} + static int goodix_check_cfg_16(struct goodix_ts_data *ts, const struct firmware *cfg) { @@ -482,6 +503,19 @@ static int goodix_check_cfg_16(struct goodix_ts_data *ts, return 0; } +static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts) +{ + int i, raw_cfg_len = ts->chip->config_len - 3; + u16 check_sum = 0; + + for (i = 0; i < raw_cfg_len; i += 2) + check_sum += get_unaligned_be16(&ts->config[i]); + check_sum = (~check_sum) + 1; + + put_unaligned_be16(check_sum, &ts->config[raw_cfg_len]); + ts->config[raw_cfg_len + 2] = 1; /* Set "config_fresh" bit */ +} + /** * goodix_check_cfg - Checks if config fw is valid * @@ -859,12 +893,11 @@ retry_get_irq_gpio: */ static void goodix_read_config(struct goodix_ts_data *ts) { - u8 config[GOODIX_CONFIG_MAX_LENGTH]; int x_max, y_max; int error; error = goodix_i2c_read(ts->client, ts->chip->config_addr, - config, ts->chip->config_len); + ts->config, ts->chip->config_len); if (error) { dev_warn(&ts->client->dev, "Error reading config: %d\n", error); @@ -873,15 +906,17 @@ static void goodix_read_config(struct goodix_ts_data *ts) return; } - ts->int_trigger_type = config[TRIGGER_LOC] & 0x03; - ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f; + ts->int_trigger_type = ts->config[TRIGGER_LOC] & 0x03; + ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f; - x_max = get_unaligned_le16(&config[RESOLUTION_LOC]); - y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]); + x_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC]); + y_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC + 2]); if (x_max && y_max) { input_abs_set_max(ts->input_dev, ABS_MT_POSITION_X, x_max - 1); input_abs_set_max(ts->input_dev, ABS_MT_POSITION_Y, y_max - 1); } + + ts->chip->calc_config_checksum(ts); } /** From 686e8a2489baf6dcbd87de07f37fef07a706dd41 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:33:16 -0700 Subject: [PATCH 11/26] Input: goodix - add minimum firmware size check Our goodix_check_cfg_* helpers do things like: int i, raw_cfg_len = cfg->size - 2; ... if (check_sum != cfg->data[raw_cfg_len]) { When cfg->size < 2, this will end up indexing the cfg->data array with a negative value, which will not end well. To fix this this commit adds a new GOODIX_CONFIG_MIN_LENGTH define and adds a minimum size check for firmware-config files using this new define. For consistency this commit also adds a new GOODIX_CONFIG_GT9X_LENGTH for the length used for recent gt9xx and gt1xxx chips, instead of using GOODIX_CONFIG_MAX_LENGTH for this, so that if other length defines get added in the future it will be clear that the MIN and MAX defines should contain the min and max values of all the other defines. Signed-off-by: Hans de Goede Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/20200307121505.3707-9-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 7e318938b723..7cca9998ab77 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -39,9 +39,11 @@ #define GOODIX_MAX_CONTACT_SIZE 9 #define GOODIX_MAX_CONTACTS 10 -#define GOODIX_CONFIG_MAX_LENGTH 240 +#define GOODIX_CONFIG_MIN_LENGTH 186 #define GOODIX_CONFIG_911_LENGTH 186 #define GOODIX_CONFIG_967_LENGTH 228 +#define GOODIX_CONFIG_GT9X_LENGTH 240 +#define GOODIX_CONFIG_MAX_LENGTH 240 /* Register defines */ #define GOODIX_REG_COMMAND 0x8040 @@ -109,7 +111,7 @@ static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts); static const struct goodix_chip_data gt1x_chip_data = { .config_addr = GOODIX_GT1X_REG_CONFIG_DATA, - .config_len = GOODIX_CONFIG_MAX_LENGTH, + .config_len = GOODIX_CONFIG_GT9X_LENGTH, .check_config = goodix_check_cfg_16, .calc_config_checksum = goodix_calc_cfg_checksum_16, }; @@ -130,7 +132,7 @@ static const struct goodix_chip_data gt967_chip_data = { static const struct goodix_chip_data gt9x_chip_data = { .config_addr = GOODIX_GT9X_REG_CONFIG_DATA, - .config_len = GOODIX_CONFIG_MAX_LENGTH, + .config_len = GOODIX_CONFIG_GT9X_LENGTH, .check_config = goodix_check_cfg_8, .calc_config_checksum = goodix_calc_cfg_checksum_8, }; @@ -525,7 +527,8 @@ static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts) static int goodix_check_cfg(struct goodix_ts_data *ts, const struct firmware *cfg) { - if (cfg->size > GOODIX_CONFIG_MAX_LENGTH) { + if (cfg->size < GOODIX_CONFIG_MIN_LENGTH || + cfg->size > GOODIX_CONFIG_MAX_LENGTH) { dev_err(&ts->client->dev, "The length of the config fw is not correct"); return -EINVAL; From 1a67448f1563c7fc5d3e19e6897e04a7b5424bf2 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:33:50 -0700 Subject: [PATCH 12/26] Input: goodix - make goodix_send_cfg() take a raw buffer as argument Make goodix_send_cfg() take a raw buffer as argument instead of a struct firmware *cfg, so that it can also be used to restore the config on resume if necessary. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200307121505.3707-10-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 48 ++++++++++++++---------------- 1 file changed, 22 insertions(+), 26 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 7cca9998ab77..958a5d65e374 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -73,7 +73,7 @@ enum goodix_irq_pin_access_method { struct goodix_chip_data { u16 config_addr; int config_len; - int (*check_config)(struct goodix_ts_data *, const struct firmware *); + int (*check_config)(struct goodix_ts_data *ts, const u8 *cfg, int len); void (*calc_config_checksum)(struct goodix_ts_data *ts); }; @@ -103,9 +103,9 @@ struct goodix_ts_data { }; static int goodix_check_cfg_8(struct goodix_ts_data *ts, - const struct firmware *cfg); + const u8 *cfg, int len); static int goodix_check_cfg_16(struct goodix_ts_data *ts, - const struct firmware *cfg); + const u8 *cfg, int len); static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts); static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts); @@ -444,22 +444,21 @@ static int goodix_request_irq(struct goodix_ts_data *ts) ts->irq_flags, ts->client->name, ts); } -static int goodix_check_cfg_8(struct goodix_ts_data *ts, - const struct firmware *cfg) +static int goodix_check_cfg_8(struct goodix_ts_data *ts, const u8 *cfg, int len) { - int i, raw_cfg_len = cfg->size - 2; + int i, raw_cfg_len = len - 2; u8 check_sum = 0; for (i = 0; i < raw_cfg_len; i++) - check_sum += cfg->data[i]; + check_sum += cfg[i]; check_sum = (~check_sum) + 1; - if (check_sum != cfg->data[raw_cfg_len]) { + if (check_sum != cfg[raw_cfg_len]) { dev_err(&ts->client->dev, "The checksum of the config fw is not correct"); return -EINVAL; } - if (cfg->data[raw_cfg_len + 1] != 1) { + if (cfg[raw_cfg_len + 1] != 1) { dev_err(&ts->client->dev, "Config fw must have Config_Fresh register set"); return -EINVAL; @@ -481,22 +480,22 @@ static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts) ts->config[raw_cfg_len + 1] = 1; /* Set "config_fresh" bit */ } -static int goodix_check_cfg_16(struct goodix_ts_data *ts, - const struct firmware *cfg) +static int goodix_check_cfg_16(struct goodix_ts_data *ts, const u8 *cfg, + int len) { - int i, raw_cfg_len = cfg->size - 3; + int i, raw_cfg_len = len - 3; u16 check_sum = 0; for (i = 0; i < raw_cfg_len; i += 2) - check_sum += get_unaligned_be16(&cfg->data[i]); + check_sum += get_unaligned_be16(&cfg[i]); check_sum = (~check_sum) + 1; - if (check_sum != get_unaligned_be16(&cfg->data[raw_cfg_len])) { + if (check_sum != get_unaligned_be16(&cfg[raw_cfg_len])) { dev_err(&ts->client->dev, "The checksum of the config fw is not correct"); return -EINVAL; } - if (cfg->data[raw_cfg_len + 2] != 1) { + if (cfg[raw_cfg_len + 2] != 1) { dev_err(&ts->client->dev, "Config fw must have Config_Fresh register set"); return -EINVAL; @@ -524,17 +523,16 @@ static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts) * @ts: goodix_ts_data pointer * @cfg: firmware config data */ -static int goodix_check_cfg(struct goodix_ts_data *ts, - const struct firmware *cfg) +static int goodix_check_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len) { - if (cfg->size < GOODIX_CONFIG_MIN_LENGTH || - cfg->size > GOODIX_CONFIG_MAX_LENGTH) { + if (len < GOODIX_CONFIG_MIN_LENGTH || + len > GOODIX_CONFIG_MAX_LENGTH) { dev_err(&ts->client->dev, "The length of the config fw is not correct"); return -EINVAL; } - return ts->chip->check_config(ts, cfg); + return ts->chip->check_config(ts, cfg, len); } /** @@ -543,17 +541,15 @@ static int goodix_check_cfg(struct goodix_ts_data *ts, * @ts: goodix_ts_data pointer * @cfg: config firmware to write to device */ -static int goodix_send_cfg(struct goodix_ts_data *ts, - const struct firmware *cfg) +static int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len) { int error; - error = goodix_check_cfg(ts, cfg); + error = goodix_check_cfg(ts, cfg, len); if (error) return error; - error = goodix_i2c_write(ts->client, ts->chip->config_addr, cfg->data, - cfg->size); + error = goodix_i2c_write(ts->client, ts->chip->config_addr, cfg, len); if (error) { dev_err(&ts->client->dev, "Failed to write config data: %d", error); @@ -1094,7 +1090,7 @@ static void goodix_config_cb(const struct firmware *cfg, void *ctx) if (cfg) { /* send device configuration to the firmware */ - error = goodix_send_cfg(ts, cfg); + error = goodix_send_cfg(ts, cfg->data, cfg->size); if (error) goto err_release_cfg; } From 273ec6bd9af56feabdc72405fa546ef92dc50bc9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:34:11 -0700 Subject: [PATCH 13/26] Input: goodix - restore config on resume if necessary Some devices, e.g the Trekstor Primetab S11B, lose there config over a suspend/resume cycle (likely the controller loses power during suspend). This commit reads back the config version on resume and if matches the expected config version it resets the controller and resends the config we read back and saved at probe time. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200307121505.3707-11-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 958a5d65e374..7811500ba3b5 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -1268,6 +1268,7 @@ static int __maybe_unused goodix_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct goodix_ts_data *ts = i2c_get_clientdata(client); + u8 config_ver; int error; if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { @@ -1289,6 +1290,27 @@ static int __maybe_unused goodix_resume(struct device *dev) if (error) return error; + error = goodix_i2c_read(ts->client, ts->chip->config_addr, + &config_ver, 1); + if (error) + dev_warn(dev, "Error reading config version: %d, resetting controller\n", + error); + else if (config_ver != ts->config[0]) + dev_info(dev, "Config version mismatch %d != %d, resetting controller\n", + config_ver, ts->config[0]); + + if (error != 0 || config_ver != ts->config[0]) { + error = goodix_reset(ts); + if (error) { + dev_err(dev, "Controller reset failed.\n"); + return error; + } + + error = goodix_send_cfg(ts, ts->config, ts->chip->config_len); + if (error) + return error; + } + error = goodix_request_irq(ts); if (error) return error; From 9e1f2d70ec3998e6d9948f8ac616db21fa4243d5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 24 Mar 2020 11:37:23 -0700 Subject: [PATCH 14/26] Input: goodix - try to reset the controller if the i2c-test fails On some ACPI/x86 devices (where we use one of the ACPI IRQ pin access methods) the firmware is buggy, it does not properly reset the controller at boot, and we cannot communicate with it. Normally on ACPI/x86 devices we do not want to reset the controller at probe time since in some cases this causes the controller to loose its configuration and this is loaded into it by the system's firmware. So on these systems we leave the reset_controller_at_probe flag unset, even though we have a access to both the IRQ and reset pins and thus could reset it. In the case of the buggy firmware we have to reset the controller to actually be able to talk to it. This commit adds a special case for this, if the goodix_i2c_test() fails, and we have not reset the controller yet; and we do have a way to reset the controller then retry the i2c-test after resetting the controller. This fixes the driver failing at probe on ACPI/x86 systems with this firmware bug. Reported-and-tested-by: Dmitry Mastykin Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200311191013.10826-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 7811500ba3b5..99a88bd3d212 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -1159,6 +1159,7 @@ static int goodix_ts_probe(struct i2c_client *client, if (error) return error; +reset: if (ts->reset_controller_at_probe) { /* reset the controller */ error = goodix_reset(ts); @@ -1170,6 +1171,12 @@ static int goodix_ts_probe(struct i2c_client *client, error = goodix_i2c_test(client); if (error) { + if (!ts->reset_controller_at_probe && + ts->irq_pin_access_method != IRQ_PIN_ACCESS_NONE) { + /* Retry after a controller reset */ + ts->reset_controller_at_probe = true; + goto reset; + } dev_err(&client->dev, "I2C communication failure: %d\n", error); return error; } From 24ef83f6e31d20fc121a7cd732b04b498475fca3 Mon Sep 17 00:00:00 2001 From: Dmitry Mastykin Date: Tue, 24 Mar 2020 11:38:28 -0700 Subject: [PATCH 15/26] Input: goodix - fix spurious key release events The goodix panel sends spurious interrupts after a 'finger up' event, which always cause a timeout. We were exiting the interrupt handler by reporting touch_num == 0, but this was still processed as valid and caused the code to use the uninitialised point_data, creating spurious key release events. Report an error from the interrupt handler so as to avoid processing invalid point_data further. Signed-off-by: Dmitry Mastykin Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/20200316075302.3759-2-dmastykin@astralinux.ru Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 99a88bd3d212..4cfebdde7d80 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -345,7 +345,7 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) * The Goodix panel will send spurious interrupts after a * 'finger up' event, which will always cause a timeout. */ - return 0; + return -ENOMSG; } static void goodix_ts_report_touch_8b(struct goodix_ts_data *ts, u8 *coor_data) From 492ee52c1cd4b6145bc39f73a20d2cf698eb33d2 Mon Sep 17 00:00:00 2001 From: Dmitry Mastykin Date: Tue, 24 Mar 2020 11:38:49 -0700 Subject: [PATCH 16/26] Input: goodix - add support for more then one touch-key Some devices with a goodix touchscreen have more then 1 capacitive touch-key. This commit replaces the current support for a single touch-key, which ignored the reported key-code. With support for up to 7 touch-keys, based upon checking the key-code which is post-fixed to any reported touch-data. KEY_LEFTMETA is assigned to the first touch-key (it will still be the default keycode for devices with a single touch-key). KEY_F1, KEY_F2... are assigned as default keycode for the other touch-keys. This commit also add supports for keycode remapping, so that systemd-udev's hwdb can be used to remap the codes to send keycodes to match the icons on the buttons for devices with more then 1 touch-key. Signed-off-by: Dmitry Mastykin Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/20200316075302.3759-1-dmastykin@astralinux.ru Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 62 +++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 4cfebdde7d80..9805372aba5d 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -38,6 +38,7 @@ #define GOODIX_CONTACT_SIZE 8 #define GOODIX_MAX_CONTACT_SIZE 9 #define GOODIX_MAX_CONTACTS 10 +#define GOODIX_MAX_KEYS 7 #define GOODIX_CONFIG_MIN_LENGTH 186 #define GOODIX_CONFIG_911_LENGTH 186 @@ -55,6 +56,7 @@ #define GOODIX_REG_ID 0x8140 #define GOODIX_BUFFER_STATUS_READY BIT(7) +#define GOODIX_HAVE_KEY BIT(4) #define GOODIX_BUFFER_STATUS_TIMEOUT 20 #define RESOLUTION_LOC 1 @@ -100,6 +102,7 @@ struct goodix_ts_data { enum goodix_irq_pin_access_method irq_pin_access_method; unsigned int contact_size; u8 config[GOODIX_CONFIG_MAX_LENGTH]; + unsigned short keymap[GOODIX_MAX_KEYS]; }; static int goodix_check_cfg_8(struct goodix_ts_data *ts, @@ -302,6 +305,13 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) unsigned long max_timeout; int touch_num; int error; + u16 addr = GOODIX_READ_COOR_ADDR; + /* + * We are going to read 1-byte header, + * ts->contact_size * max(1, touch_num) bytes of coordinates + * and 1-byte footer which contains the touch-key code. + */ + const int header_contact_keycode_size = 1 + ts->contact_size + 1; /* * The 'buffer status' bit, which indicates that the data is valid, is @@ -310,8 +320,8 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) */ max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT); do { - error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR, - data, ts->contact_size + 1); + error = goodix_i2c_read(ts->client, addr, data, + header_contact_keycode_size); if (error) { dev_err(&ts->client->dev, "I2C transfer error: %d\n", error); @@ -324,11 +334,10 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) return -EPROTO; if (touch_num > 1) { - data += 1 + ts->contact_size; + addr += header_contact_keycode_size; + data += header_contact_keycode_size; error = goodix_i2c_read(ts->client, - GOODIX_READ_COOR_ADDR + - 1 + ts->contact_size, - data, + addr, data, ts->contact_size * (touch_num - 1)); if (error) @@ -378,6 +387,25 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data) input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w); } +static void goodix_ts_report_key(struct goodix_ts_data *ts, u8 *data) +{ + int touch_num; + u8 key_value; + int i; + + if (data[0] & GOODIX_HAVE_KEY) { + touch_num = data[0] & 0x0f; + key_value = data[1 + ts->contact_size * touch_num]; + for (i = 0; i < GOODIX_MAX_KEYS; i++) + if (key_value & BIT(i)) + input_report_key(ts->input_dev, + ts->keymap[i], 1); + } else { + for (i = 0; i < GOODIX_MAX_KEYS; i++) + input_report_key(ts->input_dev, ts->keymap[i], 0); + } +} + /** * goodix_process_events - Process incoming events * @@ -388,7 +416,7 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data) */ static void goodix_process_events(struct goodix_ts_data *ts) { - u8 point_data[1 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; + u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; int touch_num; int i; @@ -396,11 +424,7 @@ static void goodix_process_events(struct goodix_ts_data *ts) if (touch_num < 0) return; - /* - * Bit 4 of the first byte reports the status of the capacitive - * Windows/Home button. - */ - input_report_key(ts->input_dev, KEY_LEFTMETA, point_data[0] & BIT(4)); + goodix_ts_report_key(ts, point_data); for (i = 0; i < touch_num; i++) if (ts->contact_size == 9) @@ -986,6 +1010,7 @@ static int goodix_i2c_test(struct i2c_client *client) static int goodix_configure_dev(struct goodix_ts_data *ts) { int error; + int i; ts->int_trigger_type = GOODIX_INT_TRIGGER; ts->max_touch_num = GOODIX_MAX_CONTACTS; @@ -1003,8 +1028,19 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) ts->input_dev->id.product = ts->id; ts->input_dev->id.version = ts->version; + ts->input_dev->keycode = ts->keymap; + ts->input_dev->keycodesize = sizeof(ts->keymap[0]); + ts->input_dev->keycodemax = GOODIX_MAX_KEYS; + /* Capacitive Windows/Home button on some devices */ - input_set_capability(ts->input_dev, EV_KEY, KEY_LEFTMETA); + for (i = 0; i < GOODIX_MAX_KEYS; ++i) { + if (i == 0) + ts->keymap[i] = KEY_LEFTMETA; + else + ts->keymap[i] = KEY_F1 + (i - 1); + + input_set_capability(ts->input_dev, EV_KEY, ts->keymap[i]); + } input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X); input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y); From 8c2327ef7999c00d69258f03ab35c280e4dcfe46 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 24 Mar 2020 11:57:46 -0700 Subject: [PATCH 17/26] dt-bindings: input: touchscreen: add compatible string for Goodix GT917S Goodix GT917S is a new touchscreen chip from Goodix. Add its compatible string to the device tree binding. Signed-off-by: Icenowy Zheng Acked-by: Rob Herring Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/20200228010146.12215-2-icenowy@aosc.io Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/input/touchscreen/goodix.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index d7c3262b2494..109e5ca8d6e8 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -21,6 +21,7 @@ properties: - goodix,gt911 - goodix,gt9110 - goodix,gt912 + - goodix,gt917s - goodix,gt927 - goodix,gt9271 - goodix,gt928 From cae102e2fc0832b0633fcb4e051cc1338b37145c Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 24 Mar 2020 11:57:58 -0700 Subject: [PATCH 18/26] Input: goodix - use string-based chip ID For Goodix GT917S chip, the chip ID string is "917S", which contains not only numbers now. Use string-based chip ID in the driver to support this chip and further chips with alphanumber ID. Signed-off-by: Icenowy Zheng Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/20200228010146.12215-3-icenowy@aosc.io Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 67 +++++++++++++++++------------- 1 file changed, 39 insertions(+), 28 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 9805372aba5d..ca5e82eb4e07 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -79,6 +79,13 @@ struct goodix_chip_data { void (*calc_config_checksum)(struct goodix_ts_data *ts); }; +struct goodix_chip_id { + const char *id; + const struct goodix_chip_data *data; +}; + +#define GOODIX_ID_MAX_LEN 4 + struct goodix_ts_data { struct i2c_client *client; struct input_dev *input_dev; @@ -92,7 +99,7 @@ struct goodix_ts_data { struct gpio_desc *gpiod_rst; int gpio_count; int gpio_int_idx; - u16 id; + char id[GOODIX_ID_MAX_LEN + 1]; u16 version; const char *cfg_name; bool reset_controller_at_probe; @@ -140,6 +147,22 @@ static const struct goodix_chip_data gt9x_chip_data = { .calc_config_checksum = goodix_calc_cfg_checksum_8, }; +static const struct goodix_chip_id goodix_chip_ids[] = { + { .id = "1151", .data = >1x_chip_data }, + { .id = "5663", .data = >1x_chip_data }, + { .id = "5688", .data = >1x_chip_data }, + + { .id = "911", .data = >911_chip_data }, + { .id = "9271", .data = >911_chip_data }, + { .id = "9110", .data = >911_chip_data }, + { .id = "927", .data = >911_chip_data }, + { .id = "928", .data = >911_chip_data }, + + { .id = "912", .data = >967_chip_data }, + { .id = "967", .data = >967_chip_data }, + { } +}; + static const unsigned long goodix_irq_flags[] = { IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, @@ -276,28 +299,16 @@ static int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value) return goodix_i2c_write(client, reg, &value, sizeof(value)); } -static const struct goodix_chip_data *goodix_get_chip_data(u16 id) +static const struct goodix_chip_data *goodix_get_chip_data(const char *id) { - switch (id) { - case 1151: - case 5663: - case 5688: - return >1x_chip_data; + unsigned int i; - case 911: - case 9271: - case 9110: - case 927: - case 928: - return >911_chip_data; - - case 912: - case 967: - return >967_chip_data; - - default: - return >9x_chip_data; + for (i = 0; goodix_chip_ids[i].id; i++) { + if (!strcmp(goodix_chip_ids[i].id, id)) + return goodix_chip_ids[i].data; } + + return >9x_chip_data; } static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) @@ -951,7 +962,7 @@ static int goodix_read_version(struct goodix_ts_data *ts) { int error; u8 buf[6]; - char id_str[5]; + char id_str[GOODIX_ID_MAX_LEN + 1]; error = goodix_i2c_read(ts->client, GOODIX_REG_ID, buf, sizeof(buf)); if (error) { @@ -959,14 +970,13 @@ static int goodix_read_version(struct goodix_ts_data *ts) return error; } - memcpy(id_str, buf, 4); - id_str[4] = 0; - if (kstrtou16(id_str, 10, &ts->id)) - ts->id = 0x1001; + memcpy(id_str, buf, GOODIX_ID_MAX_LEN); + id_str[GOODIX_ID_MAX_LEN] = 0; + strscpy(ts->id, id_str, GOODIX_ID_MAX_LEN + 1); ts->version = get_unaligned_le16(&buf[4]); - dev_info(&ts->client->dev, "ID %d, version: %04x\n", ts->id, + dev_info(&ts->client->dev, "ID %s, version: %04x\n", ts->id, ts->version); return 0; @@ -1025,7 +1035,8 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) ts->input_dev->phys = "input/ts"; ts->input_dev->id.bustype = BUS_I2C; ts->input_dev->id.vendor = 0x0416; - ts->input_dev->id.product = ts->id; + if (kstrtou16(ts->id, 10, &ts->input_dev->id.product)) + ts->input_dev->id.product = 0x1001; ts->input_dev->id.version = ts->version; ts->input_dev->keycode = ts->keymap; @@ -1228,7 +1239,7 @@ reset: if (ts->load_cfg_from_disk) { /* update device config */ ts->cfg_name = devm_kasprintf(&client->dev, GFP_KERNEL, - "goodix_%d_cfg.bin", ts->id); + "goodix_%s_cfg.bin", ts->id); if (!ts->cfg_name) return -ENOMEM; From b5e458af8a1447db78818fc273364ef88c2aa1dc Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 24 Mar 2020 12:25:58 -0700 Subject: [PATCH 19/26] Input: goodix - add support for Goodix GT917S Goodix GT917S is a touchscreen chip from Goodix that is in the GT1x family. Add its support by assigning the gt1x config to it. Signed-off-by: Icenowy Zheng Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/20200228010146.12215-4-icenowy@aosc.io Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index ca5e82eb4e07..973fb636cafc 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -151,6 +151,7 @@ static const struct goodix_chip_id goodix_chip_ids[] = { { .id = "1151", .data = >1x_chip_data }, { .id = "5663", .data = >1x_chip_data }, { .id = "5688", .data = >1x_chip_data }, + { .id = "917S", .data = >1x_chip_data }, { .id = "911", .data = >911_chip_data }, { .id = "9271", .data = >911_chip_data }, @@ -1397,6 +1398,7 @@ static const struct of_device_id goodix_of_match[] = { { .compatible = "goodix,gt911" }, { .compatible = "goodix,gt9110" }, { .compatible = "goodix,gt912" }, + { .compatible = "goodix,gt917s" }, { .compatible = "goodix,gt927" }, { .compatible = "goodix,gt9271" }, { .compatible = "goodix,gt928" }, From ec7f23e1d8adcd18dc3fc18c3b06daa681fe1e7e Mon Sep 17 00:00:00 2001 From: Yannick Fertre Date: Tue, 24 Mar 2020 12:30:19 -0700 Subject: [PATCH 20/26] dt-bindings: touchscreen: goodix: support of gt9147 Add support for it by adding compatible. The chip data on GT9147 is similar to GT912, like - config data register has 0x8047 address - config data register max len is 240 - config data checksum has 8-bit Signed-off-by: Yannick Fertre Acked-by: Rob Herring Link: https://lore.kernel.org/r/1583144308-3781-2-git-send-email-yannick.fertre@st.com Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/input/touchscreen/goodix.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index 109e5ca8d6e8..18cdaf0a90c1 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -21,6 +21,7 @@ properties: - goodix,gt911 - goodix,gt9110 - goodix,gt912 + - goodix,gt9147 - goodix,gt917s - goodix,gt927 - goodix,gt9271 From b9a1c116846e9ab9d4872d61604207cd5aef09b4 Mon Sep 17 00:00:00 2001 From: Yannick Fertre Date: Tue, 24 Mar 2020 12:32:27 -0700 Subject: [PATCH 21/26] Input: goodix - support gt9147 touchpanel Add support for it by adding compatible and supported chip data (default settings used). The chip data on GT9147 is similar to GT912, like - config data register has 0x8047 address - config data register max len is 240 - config data checksum has 8-bit Signed-off-by: Yannick Fertre Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/1583144308-3781-3-git-send-email-yannick.fertre@st.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 973fb636cafc..47f812b804c8 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -160,6 +160,7 @@ static const struct goodix_chip_id goodix_chip_ids[] = { { .id = "928", .data = >911_chip_data }, { .id = "912", .data = >967_chip_data }, + { .id = "9147", .data = >967_chip_data }, { .id = "967", .data = >967_chip_data }, { } }; @@ -1398,6 +1399,7 @@ static const struct of_device_id goodix_of_match[] = { { .compatible = "goodix,gt911" }, { .compatible = "goodix,gt9110" }, { .compatible = "goodix,gt912" }, + { .compatible = "goodix,gt9147" }, { .compatible = "goodix,gt917s" }, { .compatible = "goodix,gt927" }, { .compatible = "goodix,gt9271" }, From cc5117d6e4988e684f68ce5b5db312a3f0f943df Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 6 Mar 2020 17:11:46 -0800 Subject: [PATCH 22/26] Input: of_touchscreen - explicitly choose axis The 'axis + 1' calculation is implicit and potentially error prone. Moreover, few lines before the axis is set explicitly for both X and Y. Do the same when retrieving different properties for X and Y. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20200303180917.12563-1-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/of_touchscreen.c | 35 +++++++++++----------- 1 file changed, 17 insertions(+), 18 deletions(-) diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c index e16ec4c7043a..97342e14b4f1 100644 --- a/drivers/input/touchscreen/of_touchscreen.c +++ b/drivers/input/touchscreen/of_touchscreen.c @@ -66,7 +66,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, { struct device *dev = input->dev.parent; struct input_absinfo *absinfo; - unsigned int axis; + unsigned int axis, axis_x, axis_y; unsigned int minimum, maximum, fuzz; bool data_present; @@ -74,33 +74,34 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, if (!input->absinfo) return; - axis = multitouch ? ABS_MT_POSITION_X : ABS_X; + axis_x = multitouch ? ABS_MT_POSITION_X : ABS_X; + axis_y = multitouch ? ABS_MT_POSITION_Y : ABS_Y; + data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", - input_abs_get_min(input, axis), + input_abs_get_min(input, axis_x), &minimum) | touchscreen_get_prop_u32(dev, "touchscreen-size-x", input_abs_get_max(input, - axis) + 1, + axis_x) + 1, &maximum) | touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x", - input_abs_get_fuzz(input, axis), + input_abs_get_fuzz(input, axis_x), &fuzz); if (data_present) - touchscreen_set_params(input, axis, minimum, maximum - 1, fuzz); + touchscreen_set_params(input, axis_x, minimum, maximum - 1, fuzz); - axis = multitouch ? ABS_MT_POSITION_Y : ABS_Y; data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-y", - input_abs_get_min(input, axis), + input_abs_get_min(input, axis_y), &minimum) | touchscreen_get_prop_u32(dev, "touchscreen-size-y", input_abs_get_max(input, - axis) + 1, + axis_y) + 1, &maximum) | touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y", - input_abs_get_fuzz(input, axis), + input_abs_get_fuzz(input, axis_y), &fuzz); if (data_present) - touchscreen_set_params(input, axis, minimum, maximum - 1, fuzz); + touchscreen_set_params(input, axis_y, minimum, maximum - 1, fuzz); axis = multitouch ? ABS_MT_PRESSURE : ABS_PRESSURE; data_present = touchscreen_get_prop_u32(dev, @@ -117,15 +118,13 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, if (!prop) return; - axis = multitouch ? ABS_MT_POSITION_X : ABS_X; - - prop->max_x = input_abs_get_max(input, axis); - prop->max_y = input_abs_get_max(input, axis + 1); + prop->max_x = input_abs_get_max(input, axis_x); + prop->max_y = input_abs_get_max(input, axis_y); prop->invert_x = device_property_read_bool(dev, "touchscreen-inverted-x"); if (prop->invert_x) { - absinfo = &input->absinfo[axis]; + absinfo = &input->absinfo[axis_x]; absinfo->maximum -= absinfo->minimum; absinfo->minimum = 0; } @@ -133,7 +132,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, prop->invert_y = device_property_read_bool(dev, "touchscreen-inverted-y"); if (prop->invert_y) { - absinfo = &input->absinfo[axis + 1]; + absinfo = &input->absinfo[axis_y]; absinfo->maximum -= absinfo->minimum; absinfo->minimum = 0; } @@ -141,7 +140,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, prop->swap_x_y = device_property_read_bool(dev, "touchscreen-swapped-x-y"); if (prop->swap_x_y) - swap(input->absinfo[axis], input->absinfo[axis + 1]); + swap(input->absinfo[axis_x], input->absinfo[axis_y]); } EXPORT_SYMBOL(touchscreen_parse_properties); From 10ad4845cd3d760c191ab4ecef446b99a6b2c779 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Sat, 15 Feb 2020 15:47:48 -0800 Subject: [PATCH 23/26] dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema Convert the EDT-FT5x06 to DT schema using json-schema. Signed-off-by: Benjamin Gaignard Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20200207084657.31195-1-benjamin.gaignard@st.com Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/edt-ft5x06.txt | 77 ----------- .../input/touchscreen/edt-ft5x06.yaml | 125 ++++++++++++++++++ 2 files changed, 125 insertions(+), 77 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt create mode 100644 Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt deleted file mode 100644 index 0e57315e9cbd..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt +++ /dev/null @@ -1,77 +0,0 @@ -FocalTech EDT-FT5x06 Polytouch driver -===================================== - -There are 5 variants of the chip for various touch panel sizes -FT5206GE1 2.8" .. 3.8" -FT5306DE4 4.3" .. 7" -FT5406EE8 7" .. 8.9" -FT5506EEG 7" .. 8.9" -FT5726NEI 5.7” .. 11.6" - -The software interface is identical for all those chips, so that -currently there is no need for the driver to distinguish between the -different chips. Nevertheless distinct compatible strings are used so -that a distinction can be added if necessary without changing the DT -bindings. - - -Required properties: - - compatible: "edt,edt-ft5206" - or: "edt,edt-ft5306" - or: "edt,edt-ft5406" - or: "edt,edt-ft5506" - or: "evervision,ev-ft5726" - or: "focaltech,ft6236" - - - reg: I2C slave address of the chip (0x38) - - interrupts: interrupt specification for the touchdetect - interrupt - -Optional properties: - - reset-gpios: GPIO specification for the RESET input - - wake-gpios: GPIO specification for the WAKE input - - vcc-supply: Regulator that supplies the touchscreen - - - pinctrl-names: should be "default" - - pinctrl-0: a phandle pointing to the pin settings for the - control gpios - - - wakeup-source: If present the device will act as wakeup-source - - - threshold: allows setting the "click"-threshold in the range - from 0 to 80. - - - gain: allows setting the sensitivity in the range from 0 to - 31. Note that lower values indicate higher - sensitivity. - - - offset: allows setting the edge compensation in the range from - 0 to 31. - - - offset-x: Same as offset, but applies only to the horizontal position. - Range from 0 to 80, only supported by evervision,ev-ft5726 - devices. - - - offset-y: Same as offset, but applies only to the vertical position. - Range from 0 to 80, only supported by evervision,ev-ft5726 - devices. - - - touchscreen-size-x : See touchscreen.txt - - touchscreen-size-y : See touchscreen.txt - - touchscreen-fuzz-x : See touchscreen.txt - - touchscreen-fuzz-y : See touchscreen.txt - - touchscreen-inverted-x : See touchscreen.txt - - touchscreen-inverted-y : See touchscreen.txt - - touchscreen-swapped-x-y : See touchscreen.txt - -Example: - polytouch: edt-ft5x06@38 { - compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; - reg = <0x38>; - pinctrl-names = "default"; - pinctrl-0 = <&edt_ft5x06_pins>; - interrupt-parent = <&gpio2>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml new file mode 100644 index 000000000000..8d58709d4b47 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FocalTech EDT-FT5x06 Polytouch Bindings + +description: | + There are 5 variants of the chip for various touch panel sizes + FT5206GE1 2.8" .. 3.8" + FT5306DE4 4.3" .. 7" + FT5406EE8 7" .. 8.9" + FT5506EEG 7" .. 8.9" + FT5726NEI 5.7” .. 11.6" + +maintainers: + - Dmitry Torokhov + +allOf: + - $ref: touchscreen.yaml# + - if: + properties: + compatible: + contains: + enum: + - evervision,ev-ft5726 + + then: + properties: + offset-x: true + offset-y: true + +properties: + compatible: + enum: + - edt,edt-ft5206 + - edt,edt-ft5306 + - edt,edt-ft5406 + - edt,edt-ft5506 + - evervision,ev-ft5726 + - focaltech,ft6236 + + reg: + const: 0x38 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wake-gpios: + maxItems: 1 + + wakeup-source: true + + vcc-supply: + maxItems: 1 + + gain: + description: Allows setting the sensitivity in the range from 0 to 31. + Note that lower values indicate higher sensitivity. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 31 + + offset: + description: Allows setting the edge compensation in the range from 0 to 31. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 31 + + offset-x: + description: Same as offset, but applies only to the horizontal position. + Range from 0 to 80, only supported by evervision,ev-ft5726 devices. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 80 + + offset-y: + description: Same as offset, but applies only to the vertical position. + Range from 0 to 80, only supported by evervision,ev-ft5726 devices. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 80 + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + interrupt-controller: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + #include + i2c@00000000 { + #address-cells = <1>; + #size-cells = <0>; + edt-ft5x06@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; + }; + }; + +... From c9c20ee3cfce924e7b2a8138df2d6958c500858a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Apr 2020 12:53:36 -0700 Subject: [PATCH 24/26] Input: goodix - fix compilation when ACPI support is disabled acpi_evaluate_object() and acpi_execute_simple_method() are not part of the group of ACPI related functions which get stubbed by include/linux/acpi.h when ACPI support is disabled, so the IRQ_PIN_ACCESS_ACPI_METHOD handling code must be stubbed out. For consistency use the same #if condition as which is used to replace goodix_add_acpi_gpio_mappings with a stub. Fixes: c5fca485320e ("Input: goodix - add support for controlling the IRQ pin through ACPI methods") Reported-by: kbuild test robot Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200401014529.GL75430@dtor-ws [dtor: stubbed out the ACPI method accessors] Reviewed-by: Bastien Nocera Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 55 +++++++++++++++++++++++------- 1 file changed, 42 insertions(+), 13 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 47f812b804c8..02c75ea385e0 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -63,6 +63,11 @@ #define MAX_CONTACTS_LOC 5 #define TRIGGER_LOC 6 +/* Our special handling for GPIO accesses through ACPI is x86 specific */ +#if defined CONFIG_X86 && defined CONFIG_ACPI +#define ACPI_GPIO_SUPPORT +#endif + struct goodix_ts_data; enum goodix_irq_pin_access_method { @@ -600,12 +605,42 @@ static int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len) return 0; } -static int goodix_irq_direction_output(struct goodix_ts_data *ts, - int value) +#ifdef ACPI_GPIO_SUPPORT +static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts) { - struct device *dev = &ts->client->dev; + acpi_handle handle = ACPI_HANDLE(&ts->client->dev); acpi_status status; + status = acpi_evaluate_object(handle, "INTI", NULL, NULL); + return ACPI_SUCCESS(status) ? 0 : -EIO; +} + +static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value) +{ + acpi_handle handle = ACPI_HANDLE(&ts->client->dev); + acpi_status status; + + status = acpi_execute_simple_method(handle, "INTO", value); + return ACPI_SUCCESS(status) ? 0 : -EIO; +} +#else +static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts) +{ + dev_err(&ts->client->dev, + "%s called on device without ACPI support\n", __func__); + return -EINVAL; +} + +static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value) +{ + dev_err(&ts->client->dev, + "%s called on device without ACPI support\n", __func__); + return -EINVAL; +} +#endif + +static int goodix_irq_direction_output(struct goodix_ts_data *ts, int value) +{ switch (ts->irq_pin_access_method) { case IRQ_PIN_ACCESS_NONE: dev_err(&ts->client->dev, @@ -621,9 +656,7 @@ static int goodix_irq_direction_output(struct goodix_ts_data *ts, */ return gpiod_direction_output_raw(ts->gpiod_int, value); case IRQ_PIN_ACCESS_ACPI_METHOD: - status = acpi_execute_simple_method(ACPI_HANDLE(dev), - "INTO", value); - return ACPI_SUCCESS(status) ? 0 : -EIO; + return goodix_pin_acpi_output_method(ts, value); } return -EINVAL; /* Never reached */ @@ -631,9 +664,6 @@ static int goodix_irq_direction_output(struct goodix_ts_data *ts, static int goodix_irq_direction_input(struct goodix_ts_data *ts) { - struct device *dev = &ts->client->dev; - acpi_status status; - switch (ts->irq_pin_access_method) { case IRQ_PIN_ACCESS_NONE: dev_err(&ts->client->dev, @@ -641,12 +671,11 @@ static int goodix_irq_direction_input(struct goodix_ts_data *ts) __func__); return -EINVAL; case IRQ_PIN_ACCESS_GPIO: + return gpiod_direction_input(ts->gpiod_int); case IRQ_PIN_ACCESS_ACPI_GPIO: return gpiod_direction_input(ts->gpiod_int); case IRQ_PIN_ACCESS_ACPI_METHOD: - status = acpi_evaluate_object(ACPI_HANDLE(dev), "INTI", - NULL, NULL); - return ACPI_SUCCESS(status) ? 0 : -EIO; + return goodix_pin_acpi_direction_input(ts); } return -EINVAL; /* Never reached */ @@ -710,7 +739,7 @@ static int goodix_reset(struct goodix_ts_data *ts) return 0; } -#if defined CONFIG_X86 && defined CONFIG_ACPI +#ifdef ACPI_GPIO_SUPPORT #include #include From ebc68cedec4aead47d8d11623d013cca9bf8e825 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Apr 2020 13:23:06 -0700 Subject: [PATCH 25/26] Input: i8042 - add Acer Aspire 5738z to nomux list The Acer Aspire 5738z has a button to disable (and re-enable) the touchpad next to the touchpad. When this button is pressed a LED underneath indicates that the touchpad is disabled (and an event is send to userspace and GNOME shows its touchpad enabled / disable OSD thingie). So far so good, but after re-enabling the touchpad it no longer works. The laptop does not have an external ps2 port, so mux mode is not needed and disabling mux mode fixes the touchpad no longer working after toggling it off and back on again, so lets add this laptop model to the nomux list. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index dc974c288e88..08e919dbeb5d 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -530,6 +530,17 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo LaVie Z"), }, }, + { + /* + * Acer Aspire 5738z + * Touchpad stops working in mux mode when dis- + re-enabled + * with the touchpad enable/disable toggle hotkey + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"), + }, + }, { } }; From 3a8579629665bd6c0b37afcb2291080e959b885d Mon Sep 17 00:00:00 2001 From: Rajat Jain Date: Wed, 1 Apr 2020 13:24:11 -0700 Subject: [PATCH 26/26] Input: update SPDX tag for input-event-codes.h Replace the /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ with /* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ to help coreboot community consume this file without relaxing their licensing checks. Signed-off-by: Rajat Jain Link: https://lore.kernel.org/r/20200329172513.133548-1-rajatja@google.com Signed-off-by: Dmitry Torokhov --- include/uapi/linux/input-event-codes.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 0f1db1cccc3f..f6cc830b31f2 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Input event codes *