at86rf230: remove multiple dereferencing for irq

By holding the irq variable inside at86rf230_state_change we can squash
some multiple dereferencing for getting irq num.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This commit is contained in:
Alexander Aring 2015-03-01 21:55:31 +01:00 committed by Marcel Holtmann
parent 74de4c804c
commit cca990c85d
1 changed files with 14 additions and 11 deletions

View File

@ -62,6 +62,7 @@ struct at86rf2xx_chip_data {
struct at86rf230_state_change {
struct at86rf230_local *lp;
int irq;
struct spi_message msg;
struct spi_transfer trx;
@ -483,7 +484,7 @@ at86rf230_async_read_reg(struct at86rf230_local *lp, const u8 reg,
rc = spi_async(lp->spi, &ctx->msg);
if (rc) {
if (irq_enable)
enable_irq(lp->spi->irq);
enable_irq(ctx->irq);
at86rf230_async_error(lp, ctx, rc);
}
@ -667,7 +668,7 @@ at86rf230_async_state_change_start(void *context)
rc = spi_async(lp->spi, &ctx->msg);
if (rc) {
if (ctx->irq_enable)
enable_irq(lp->spi->irq);
enable_irq(ctx->irq);
at86rf230_async_error(lp, ctx, rc);
}
@ -726,7 +727,7 @@ at86rf230_tx_complete(void *context)
struct at86rf230_state_change *ctx = context;
struct at86rf230_local *lp = ctx->lp;
enable_irq(lp->spi->irq);
enable_irq(ctx->irq);
ieee802154_xmit_complete(lp->hw, lp->tx_skb, !lp->tx_aret);
}
@ -798,7 +799,7 @@ at86rf230_rx_read_frame_complete(void *context)
lqi = buf[2 + len];
memcpy(rx_local_buf, buf + 2, len);
enable_irq(lp->spi->irq);
enable_irq(ctx->irq);
skb = dev_alloc_skb(IEEE802154_MTU);
if (!skb) {
@ -811,8 +812,10 @@ at86rf230_rx_read_frame_complete(void *context)
}
static void
at86rf230_rx_read_frame(struct at86rf230_local *lp)
at86rf230_rx_read_frame(void *context)
{
struct at86rf230_state_change *ctx = context;
struct at86rf230_local *lp = ctx->lp;
int rc;
u8 *buf = lp->irq.buf;
@ -822,7 +825,7 @@ at86rf230_rx_read_frame(struct at86rf230_local *lp)
lp->irq.msg.complete = at86rf230_rx_read_frame_complete;
rc = spi_async(lp->spi, &lp->irq.msg);
if (rc) {
enable_irq(lp->spi->irq);
enable_irq(ctx->irq);
at86rf230_async_error(lp, &lp->irq, rc);
}
}
@ -830,16 +833,13 @@ at86rf230_rx_read_frame(struct at86rf230_local *lp)
static void
at86rf230_rx_trac_check(void *context)
{
struct at86rf230_state_change *ctx = context;
struct at86rf230_local *lp = ctx->lp;
/* Possible check on trac status here. This could be useful to make
* some stats why receive is failed. Not used at the moment, but it's
* maybe timing relevant. Datasheet doesn't say anything about this.
* The programming guide say do it so.
*/
at86rf230_rx_read_frame(lp);
at86rf230_rx_read_frame(context);
}
static void
@ -878,7 +878,7 @@ at86rf230_irq_status(void *context)
if (irq & IRQ_TRX_END) {
at86rf230_irq_trx_end(lp);
} else {
enable_irq(lp->spi->irq);
enable_irq(ctx->irq);
dev_err(&lp->spi->dev, "not supported irq %02x received\n",
irq);
}
@ -1539,6 +1539,7 @@ static void
at86rf230_setup_spi_messages(struct at86rf230_local *lp)
{
lp->state.lp = lp;
lp->state.irq = lp->spi->irq;
spi_message_init(&lp->state.msg);
lp->state.msg.context = &lp->state;
lp->state.trx.tx_buf = lp->state.buf;
@ -1546,6 +1547,7 @@ at86rf230_setup_spi_messages(struct at86rf230_local *lp)
spi_message_add_tail(&lp->state.trx, &lp->state.msg);
lp->irq.lp = lp;
lp->irq.irq = lp->spi->irq;
spi_message_init(&lp->irq.msg);
lp->irq.msg.context = &lp->irq;
lp->irq.trx.tx_buf = lp->irq.buf;
@ -1553,6 +1555,7 @@ at86rf230_setup_spi_messages(struct at86rf230_local *lp)
spi_message_add_tail(&lp->irq.trx, &lp->irq.msg);
lp->tx.lp = lp;
lp->tx.irq = lp->spi->irq;
spi_message_init(&lp->tx.msg);
lp->tx.msg.context = &lp->tx;
lp->tx.trx.tx_buf = lp->tx.buf;