hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

scsi: ufs: Change HCI macro to actual bit position 

Currently UFS HCI uses UFS_BIT() macro to get various bit position for
the hardware registers status bits. Which makes code longer instead of
shorter. This macro does not improve code readability as well.  Lets
re-write these macro definition with the actual bit position.

Suggested-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
Alim Akhtar 2017-10-03 20:51:22 +05:30 committed by Martin K. Petersen
parent f6cab3452b
commit cc81641a45
2 changed files with 42 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
drivers/scsi/ufs/ufshcd.h
View File

@ -546,13 +546,13 @@ struct ufs_hba {
bool is_irq_enabled;
/* Interrupt aggregation support is broken */
#define UFSHCD_QUIRK_BROKEN_INTR_AGGR UFS_BIT(0)
#define UFSHCD_QUIRK_BROKEN_INTR_AGGR 0x1
/*
* delay before each dme command is required as the unipro
* layer has shown instabilities
*/
#define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS UFS_BIT(1)
#define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS 0x2
/*
* If UFS host controller is having issue in processing LCC (Line
@ -561,21 +561,21 @@ struct ufs_hba {
* the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
* attribute of device to 0).
*/
#define UFSHCD_QUIRK_BROKEN_LCC UFS_BIT(2)
#define UFSHCD_QUIRK_BROKEN_LCC 0x4
/*
* The attribute PA_RXHSUNTERMCAP specifies whether or not the
* inbound Link supports unterminated line in HS mode. Setting this
* attribute to 1 fixes moving to HS gear.
*/
#define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP UFS_BIT(3)
#define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP 0x8
/*
* This quirk needs to be enabled if the host contoller only allows
* accessing the peer dme attributes in AUTO mode (FAST AUTO or
* SLOW AUTO).
*/
#define UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE UFS_BIT(4)
#define UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE 0x10
/*
* This quirk needs to be enabled if the host contoller doesn't
@ -583,13 +583,13 @@ struct ufs_hba {
* is enabled, standard UFS host driver will call the vendor specific
* ops (get_ufs_hci_version) to get the correct version.
*/
#define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION UFS_BIT(5)
#define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION 0x20
/*
* This quirk needs to be enabled if the host contoller regards
* resolution of the values of PRDTO and PRDTL in UTRD as byte.
*/
#define UFSHCD_QUIRK_PRDT_BYTE_GRAN UFS_BIT(7)
#define UFSHCD_QUIRK_PRDT_BYTE_GRAN 0x80
unsigned int quirks; /* Deviations from standard UFSHCI spec. */

66
drivers/scsi/ufs/ufshci.h
View File

@ -121,20 +121,23 @@ enum {
#define UFS_BIT(x) (1L << (x))
#define UTP_TRANSFER_REQ_COMPL UFS_BIT(0)
#define UIC_DME_END_PT_RESET UFS_BIT(1)
#define UIC_ERROR UFS_BIT(2)
#define UIC_TEST_MODE UFS_BIT(3)
#define UIC_POWER_MODE UFS_BIT(4)
#define UIC_HIBERNATE_EXIT UFS_BIT(5)
#define UIC_HIBERNATE_ENTER UFS_BIT(6)
#define UIC_LINK_LOST UFS_BIT(7)
#define UIC_LINK_STARTUP UFS_BIT(8)
#define UTP_TASK_REQ_COMPL UFS_BIT(9)
#define UIC_COMMAND_COMPL UFS_BIT(10)
#define DEVICE_FATAL_ERROR UFS_BIT(11)
#define CONTROLLER_FATAL_ERROR UFS_BIT(16)
#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17)
/*
* IS - Interrupt Status - 20h
*/
#define UTP_TRANSFER_REQ_COMPL 0x1
#define UIC_DME_END_PT_RESET 0x2
#define UIC_ERROR 0x4
#define UIC_TEST_MODE 0x8
#define UIC_POWER_MODE 0x10
#define UIC_HIBERNATE_EXIT 0x20
#define UIC_HIBERNATE_ENTER 0x40
#define UIC_LINK_LOST 0x80
#define UIC_LINK_STARTUP 0x100
#define UTP_TASK_REQ_COMPL 0x200
#define UIC_COMMAND_COMPL 0x400
#define DEVICE_FATAL_ERROR 0x800
#define CONTROLLER_FATAL_ERROR 0x10000
#define SYSTEM_BUS_FATAL_ERROR 0x20000
#define UFSHCD_UIC_PWR_MASK (UIC_HIBERNATE_ENTER |\
UIC_HIBERNATE_EXIT |\
@ -152,10 +155,10 @@ enum {
SYSTEM_BUS_FATAL_ERROR)
/* HCS - Host Controller Status 30h */
#define DEVICE_PRESENT UFS_BIT(0)
#define UTP_TRANSFER_REQ_LIST_READY UFS_BIT(1)
#define UTP_TASK_REQ_LIST_READY UFS_BIT(2)
#define UIC_COMMAND_READY UFS_BIT(3)
#define DEVICE_PRESENT 0x1
#define UTP_TRANSFER_REQ_LIST_READY 0x2
#define UTP_TASK_REQ_LIST_READY 0x4
#define UIC_COMMAND_READY 0x8
#define HOST_ERROR_INDICATOR UFS_BIT(4)
#define DEVICE_ERROR_INDICATOR UFS_BIT(5)
#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
@ -174,46 +177,47 @@ enum {
};
/* HCE - Host Controller Enable 34h */
#define CONTROLLER_ENABLE UFS_BIT(0)
#define CONTROLLER_ENABLE 0x1
#define CONTROLLER_DISABLE 0x0
#define CRYPTO_GENERAL_ENABLE UFS_BIT(1)
#define CRYPTO_GENERAL_ENABLE 0x2
/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
#define UIC_PHY_ADAPTER_LAYER_ERROR UFS_BIT(31)
#define UIC_PHY_ADAPTER_LAYER_ERROR 0x80000000
#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
#define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK 0xF
/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
#define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31)
#define UIC_DATA_LINK_LAYER_ERROR 0x80000000
#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF
#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED 0x0001
#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
/* UECN - Host UIC Error Code Network Layer 40h */
#define UIC_NETWORK_LAYER_ERROR UFS_BIT(31)
#define UIC_NETWORK_LAYER_ERROR 0x80000000
#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
/* UECT - Host UIC Error Code Transport Layer 44h */
#define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31)
#define UIC_TRANSPORT_LAYER_ERROR 0x80000000
#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
/* UECDME - Host UIC Error Code DME 48h */
#define UIC_DME_ERROR UFS_BIT(31)
#define UIC_DME_ERROR 0x80000000
#define UIC_DME_ERROR_CODE_MASK 0x1
/* UTRIACR - Interrupt Aggregation control register - 0x4Ch */
#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF
#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8)
#define INT_AGGR_COUNTER_AND_TIMER_RESET UFS_BIT(16)
#define INT_AGGR_STATUS_BIT UFS_BIT(20)
#define INT_AGGR_PARAM_WRITE UFS_BIT(24)
#define INT_AGGR_ENABLE UFS_BIT(31)
#define INT_AGGR_COUNTER_AND_TIMER_RESET 0x10000
#define INT_AGGR_STATUS_BIT 0x100000
#define INT_AGGR_PARAM_WRITE 0x1000000
#define INT_AGGR_ENABLE 0x80000000
/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT 0x1
/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
#define UTP_TASK_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
#define UTP_TASK_REQ_LIST_RUN_STOP_BIT 0x1
/* UICCMD - UIC Command */
#define COMMAND_OPCODE_MASK 0xFF