Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 mm changes from Ingo Molnar:
 "Misc smaller fixes:

   - a parse_setup_data() boot crash fix

   - a memblock and an __early_ioremap cleanup

   - turn the always-on CONFIG_ARCH_MEMORY_PROBE=y into a configurable
     option and turn it off - it's an unrobust debug facility, it
     shouldn't be enabled by default"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: avoid remapping data in parse_setup_data()
  x86: Use memblock_set_current_limit() to set limit for memblock.
  mm: Remove unused variable idx0 in __early_ioremap()
  mm/hotplug, x86: Disable ARCH_MEMORY_PROBE by default

Documentation/memory-hotplug.txt

@@ -210,13 +210,15 @@ If memory device is found, memory hotplug code will be called.
 
 4.2 Notify memory hot-add event by hand
 ------------
-In some environments, especially virtualized environment, firmware will not
-notify memory hotplug event to the kernel. For such environment, "probe"
-interface is supported. This interface depends on CONFIG_ARCH_MEMORY_PROBE.
+On powerpc, the firmware does not notify a memory hotplug event to the kernel.
+Therefore, "probe" interface is supported to notify the event to the kernel.
+This interface depends on CONFIG_ARCH_MEMORY_PROBE.
 
-Now, CONFIG_ARCH_MEMORY_PROBE is supported only by powerpc but it does not
-contain highly architecture codes. Please add config if you need "probe"
-interface.
+CONFIG_ARCH_MEMORY_PROBE is supported on powerpc only. On x86, this config
+option is disabled by default since ACPI notifies a memory hotplug event to
+the kernel, which performs its hotplug operation as the result. Please
+enable this option if you need the "probe" interface for testing purposes
+on x86.
 
 Probe interface is located at
 /sys/devices/system/memory/probe

arch/x86/Kconfig

@@ -1344,8 +1344,12 @@ config ARCH_SELECT_MEMORY_MODEL
 	depends on ARCH_SPARSEMEM_ENABLE
 
 config ARCH_MEMORY_PROBE
-	def_bool y
+	bool "Enable sysfs memory/probe interface"
 	depends on X86_64 && MEMORY_HOTPLUG
+	help
+	  This option enables a sysfs memory/probe interface for testing.
+	  See Documentation/memory-hotplug.txt for more information.
+	  If you are unsure how to answer this question, answer N.
 
 config ARCH_PROC_KCORE_TEXT
 	def_bool y

arch/x86/include/asm/e820.h

@@ -29,7 +29,7 @@ extern void e820_setup_gap(void);
 extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
 			unsigned long start_addr, unsigned long long end_addr);
 struct setup_data;
-extern void parse_e820_ext(struct setup_data *data);
+extern void parse_e820_ext(u64 phys_addr, u32 data_len);
 
 #if defined(CONFIG_X86_64) || \
 	(defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))

arch/x86/kernel/e820.c

@@ -658,15 +658,18 @@ __init void e820_setup_gap(void)
  * boot_params.e820_map, others are passed via SETUP_E820_EXT node of
  * linked list of struct setup_data, which is parsed here.
  */
-void __init parse_e820_ext(struct setup_data *sdata)
+void __init parse_e820_ext(u64 phys_addr, u32 data_len)
 {
 	int entries;
 	struct e820entry *extmap;
+	struct setup_data *sdata;
 
+	sdata = early_memremap(phys_addr, data_len);
 	entries = sdata->len / sizeof(struct e820entry);
 	extmap = (struct e820entry *)(sdata->data);
 	__append_e820_map(extmap, entries);
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+	early_iounmap(sdata, data_len);
 	printk(KERN_INFO "e820: extended physical RAM map:\n");
 	e820_print_map("extended");
 }

arch/x86/kernel/setup.c

@@ -426,25 +426,23 @@ static void __init reserve_initrd(void)
 static void __init parse_setup_data(void)
 {
 	struct setup_data *data;
-	u64 pa_data;
+	u64 pa_data, pa_next;
 
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
-		u32 data_len, map_len;
+		u32 data_len, map_len, data_type;
 
 		map_len = max(PAGE_SIZE - (pa_data & ~PAGE_MASK),
 			      (u64)sizeof(struct setup_data));
 		data = early_memremap(pa_data, map_len);
 		data_len = data->len + sizeof(struct setup_data);
-		if (data_len > map_len) {
+		data_type = data->type;
+		pa_next = data->next;
 		early_iounmap(data, map_len);
-			data = early_memremap(pa_data, data_len);
-			map_len = data_len;
-		}
 
-		switch (data->type) {
+		switch (data_type) {
 		case SETUP_E820_EXT:
-			parse_e820_ext(data);
+			parse_e820_ext(pa_data, data_len);
 			break;
 		case SETUP_DTB:
 			add_dtb(pa_data);
@@ -452,8 +450,7 @@ static void __init parse_setup_data(void)
 		default:
 			break;
 		}
-		pa_data = data->next;
-		early_iounmap(data, map_len);
+		pa_data = pa_next;
 	}
 }
 
@@ -1070,7 +1067,7 @@ void __init setup_arch(char **cmdline_p)
 
 	cleanup_highmap();
 
-	memblock.current_limit = ISA_END_ADDRESS;
+	memblock_set_current_limit(ISA_END_ADDRESS);
 	memblock_x86_fill();
 
 	/*
@@ -1103,7 +1100,7 @@ void __init setup_arch(char **cmdline_p)
 
 	setup_real_mode();
 
-	memblock.current_limit = get_max_mapped();
+	memblock_set_current_limit(get_max_mapped());
 	dma_contiguous_reserve(0);
 
 	/*

arch/x86/mm/ioremap.c

@@ -487,7 +487,7 @@ __early_ioremap(resource_size_t phys_addr, unsigned long size, pgprot_t prot)
 	unsigned long offset;
 	resource_size_t last_addr;
 	unsigned int nrpages;
-	enum fixed_addresses idx0, idx;
+	enum fixed_addresses idx;
 	int i, slot;
 
 	WARN_ON(system_state != SYSTEM_BOOTING);
@@ -540,8 +540,7 @@ __early_ioremap(resource_size_t phys_addr, unsigned long size, pgprot_t prot)
 	/*
 	 * Ok, go for it..
 	 */
-	idx0 = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot;
-	idx = idx0;
+	idx = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot;
 	while (nrpages > 0) {
 		early_set_fixmap(idx, phys_addr, prot);
 		phys_addr += PAGE_SIZE;