x86: remove end_pfn in 64bit

and use max_pfn directly.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Yinghai Lu 2008-06-24 22:14:09 -07:00 committed by Ingo Molnar
parent f47f9d538e
commit c987d12f84
14 changed files with 29 additions and 31 deletions

View File

@ -407,7 +407,9 @@ void __init gart_iommu_hole_init(void)
agp_aper_base == aper_base &&
agp_aper_order == aper_order) {
/* the same between two setting from NB and agp */
if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) {
if (!no_iommu &&
max_pfn > MAX_DMA32_PFN &&
!printed_gart_size_msg) {
printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n");
printk(KERN_ERR "please increase GART size in your BIOS setup\n");
printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n");
@ -448,7 +450,7 @@ out:
/* Got the aperture from the AGP bridge */
} else if (swiotlb && !valid_agp) {
/* Do nothing */
} else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
} else if ((!no_iommu && max_pfn > MAX_DMA32_PFN) ||
force_iommu ||
valid_agp ||
fallback_aper_force) {

View File

@ -527,7 +527,7 @@ __init void e820_setup_gap(void)
#ifdef CONFIG_X86_64
if (!found) {
gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024;
gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
"address range\n"
KERN_ERR "PCI: Unassigned devices with 32bit resource "

View File

@ -50,7 +50,7 @@ static void __init fix_hypertransport_config(int num, int slot, int func)
static void __init via_bugs(int num, int slot, int func)
{
#ifdef CONFIG_GART_IOMMU
if ((end_pfn > MAX_DMA32_PFN || force_iommu) &&
if ((max_pfn > MAX_DMA32_PFN || force_iommu) &&
!gart_iommu_aperture_allowed) {
printk(KERN_INFO
"Looks like a VIA chipset. Disabling IOMMU."

View File

@ -110,7 +110,7 @@ static int init_pgtable(struct kimage *image, unsigned long start_pgtable)
{
pgd_t *level4p;
level4p = (pgd_t *)__va(start_pgtable);
return init_level4_page(image, level4p, 0, end_pfn << PAGE_SHIFT);
return init_level4_page(image, level4p, 0, max_pfn << PAGE_SHIFT);
}
static void set_idt(void *newidt, u16 limit)

View File

@ -1394,7 +1394,7 @@ void __init detect_calgary(void)
return;
}
specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE);
specified_table_size = determine_tce_table_size(max_pfn * PAGE_SIZE);
for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
struct calgary_bus_info *info = &bus_info[bus];
@ -1459,7 +1459,7 @@ int __init calgary_iommu_init(void)
if (ret) {
printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
"falling back to no_iommu\n", ret);
if (end_pfn > MAX_DMA32_PFN)
if (max_pfn > MAX_DMA32_PFN)
printk(KERN_ERR "WARNING more than 4GB of memory, "
"32bit PCI may malfunction.\n");
return ret;

View File

@ -75,7 +75,7 @@ early_param("dma32_size", parse_dma32_size_opt);
void __init dma32_reserve_bootmem(void)
{
unsigned long size, align;
if (end_pfn <= MAX_DMA32_PFN)
if (max_pfn <= MAX_DMA32_PFN)
return;
/*
@ -94,7 +94,7 @@ void __init dma32_reserve_bootmem(void)
static void __init dma32_free_bootmem(void)
{
if (end_pfn <= MAX_DMA32_PFN)
if (max_pfn <= MAX_DMA32_PFN)
return;
if (!dma32_bootmem_ptr)

View File

@ -751,10 +751,10 @@ void __init gart_iommu_init(void)
return;
if (no_iommu ||
(!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
(!force_iommu && max_pfn <= MAX_DMA32_PFN) ||
!gart_iommu_aperture ||
(no_agp && init_k8_gatt(&info) < 0)) {
if (end_pfn > MAX_DMA32_PFN) {
if (max_pfn > MAX_DMA32_PFN) {
printk(KERN_WARNING "More than 4GB of memory "
"but GART IOMMU not available.\n"
KERN_WARNING "falling back to iommu=soft.\n");

View File

@ -38,7 +38,7 @@ const struct dma_mapping_ops swiotlb_dma_ops = {
void __init pci_swiotlb_init(void)
{
/* don't initialize swiotlb if iommu=off (no_iommu=1) */
if (!iommu_detected && !no_iommu && end_pfn > MAX_DMA32_PFN)
if (!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN)
swiotlb = 1;
if (swiotlb_force)
swiotlb = 1;

View File

@ -48,11 +48,6 @@
#include <asm/numa.h>
#include <asm/cacheflush.h>
/*
* PFN of last memory page.
*/
unsigned long end_pfn;
/*
* end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
* The direct mapping extends to max_pfn_mapped, so that we can directly access
@ -586,9 +581,9 @@ void __init paging_init(void)
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
max_zone_pfns[ZONE_NORMAL] = end_pfn;
max_zone_pfns[ZONE_NORMAL] = max_pfn;
memory_present(0, 0, end_pfn);
memory_present(0, 0, max_pfn);
sparse_init();
free_area_init_nodes(max_zone_pfns);
}
@ -670,8 +665,8 @@ void __init mem_init(void)
#else
totalram_pages = free_all_bootmem();
#endif
reservedpages = end_pfn - totalram_pages -
absent_pages_in_range(0, end_pfn);
reservedpages = max_pfn - totalram_pages -
absent_pages_in_range(0, max_pfn);
after_bootmem = 1;
codesize = (unsigned long) &_etext - (unsigned long) &_text;
@ -690,7 +685,7 @@ void __init mem_init(void)
printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
"%ldk reserved, %ldk data, %ldk init)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
end_pfn << (PAGE_SHIFT-10),
max_pfn << (PAGE_SHIFT-10),
codesize >> 10,
reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
@ -784,7 +779,7 @@ int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
#endif
unsigned long pfn = phys >> PAGE_SHIFT;
if (pfn >= end_pfn) {
if (pfn >= max_pfn) {
/*
* This can happen with kdump kernels when accessing
* firmware tables:

View File

@ -143,8 +143,8 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
limit |= (1<<24)-1;
limit++;
if (limit > end_pfn << PAGE_SHIFT)
limit = end_pfn << PAGE_SHIFT;
if (limit > max_pfn << PAGE_SHIFT)
limit = max_pfn << PAGE_SHIFT;
if (limit <= base)
continue;

View File

@ -86,7 +86,7 @@ static int __init allocate_cachealigned_memnodemap(void)
addr = 0x8000;
nodemap_size = round_up(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES);
nodemap_addr = find_e820_area(addr, end_pfn<<PAGE_SHIFT,
nodemap_addr = find_e820_area(addr, max_pfn<<PAGE_SHIFT,
nodemap_size, L1_CACHE_BYTES);
if (nodemap_addr == -1UL) {
printk(KERN_ERR
@ -579,7 +579,7 @@ void __init paging_init(void)
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
max_zone_pfns[ZONE_NORMAL] = end_pfn;
max_zone_pfns[ZONE_NORMAL] = max_pfn;
sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();

View File

@ -299,7 +299,7 @@ static int __init nodes_cover_memory(const struct bootnode *nodes)
pxmram = 0;
}
e820ram = end_pfn - absent_pages_in_range(0, end_pfn);
e820ram = max_pfn - absent_pages_in_range(0, max_pfn);
/* We seem to lose 3 pages somewhere. Allow a bit of slack. */
if ((long)(e820ram - pxmram) >= 1*1024*1024) {
printk(KERN_ERR

View File

@ -83,7 +83,7 @@ static int set_up_temporary_mappings(void)
/* Set up the direct mapping from scratch */
start = (unsigned long)pfn_to_kaddr(0);
end = (unsigned long)pfn_to_kaddr(end_pfn);
end = (unsigned long)pfn_to_kaddr(max_pfn);
for (; start < end; start = next) {
pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC);

View File

@ -58,7 +58,8 @@
void clear_page(void *page);
void copy_page(void *to, void *from);
extern unsigned long end_pfn;
/* duplicated to the one in bootmem.h */
extern unsigned long max_pfn;
extern unsigned long phys_base;
extern unsigned long __phys_addr(unsigned long);
@ -87,7 +88,7 @@ extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) ((pfn) < end_pfn)
#define pfn_valid(pfn) ((pfn) < max_pfn)
#endif