[ARM] 3405/1: lpd7a40x: CPLD ssp driver
Patch from Marc Singer Driver for operating SSP devices through LPD7A40X CPLD chip. This driver is used by the audio codecs. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Marc Singer
Russell King
parent
903e2bbda9
commit
c97898614b
|
|
@ -14,6 +14,7 @@ config MACH_LPD7A400
|
||||||
bool "LPD7A400 Card Engine"
|
bool "LPD7A400 Card Engine"
|
||||||
select ARCH_LH7A400
|
select ARCH_LH7A400
|
||||||
# select IDE_POLL
|
# select IDE_POLL
|
||||||
|
select HAS_TOUCHSCREEN_ADS7843_LH7
|
||||||
help
|
help
|
||||||
Say Y here if you are using Logic Product Development's
|
Say Y here if you are using Logic Product Development's
|
||||||
LPD7A400 CardEngine. For the time being, the LPD7A400 and
|
LPD7A400 CardEngine. For the time being, the LPD7A400 and
|
||||||
|
|
@ -23,6 +24,7 @@ config MACH_LPD7A404
|
||||||
bool "LPD7A404 Card Engine"
|
bool "LPD7A404 Card Engine"
|
||||||
select ARCH_LH7A404
|
select ARCH_LH7A404
|
||||||
# select IDE_POLL
|
# select IDE_POLL
|
||||||
|
select HAS_TOUCHSCREEN_ADC_LH7
|
||||||
help
|
help
|
||||||
Say Y here if you are using Logic Product Development's
|
Say Y here if you are using Logic Product Development's
|
||||||
LPD7A404 CardEngine. For the time being, the LPD7A400 and
|
LPD7A404 CardEngine. For the time being, the LPD7A400 and
|
||||||
|
|
@ -34,6 +36,9 @@ config ARCH_LH7A400
|
||||||
config ARCH_LH7A404
|
config ARCH_LH7A404
|
||||||
bool
|
bool
|
||||||
|
|
||||||
|
config LPD7A40X_CPLD_SSP
|
||||||
|
bool
|
||||||
|
|
||||||
config LH7A40X_CONTIGMEM
|
config LH7A40X_CONTIGMEM
|
||||||
bool "Disable NUMA Support"
|
bool "Disable NUMA Support"
|
||||||
depends on ARCH_LH7A40X
|
depends on ARCH_LH7A40X
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,343 @@
|
||||||
|
/* arch/arm/mach-lh7a40x/ssp-cpld.c
|
||||||
|
*
|
||||||
|
* Copyright (C) 2004,2005 Marc Singer
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License
|
||||||
|
* version 2 as published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* SSP/SPI driver for the CardEngine CPLD.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* NOTES
|
||||||
|
-----
|
||||||
|
|
||||||
|
o *** This driver is cribbed from the 7952x implementation.
|
||||||
|
Some comments may not apply.
|
||||||
|
|
||||||
|
o This driver contains sufficient logic to control either the
|
||||||
|
serial EEPROMs or the audio codec. It is included in the kernel
|
||||||
|
to support the codec. The EEPROMs are really the responsibility
|
||||||
|
of the boot loader and should probably be left alone.
|
||||||
|
|
||||||
|
o The code must be augmented to cope with multiple, simultaneous
|
||||||
|
clients.
|
||||||
|
o The audio codec writes to the codec chip whenever playback
|
||||||
|
starts.
|
||||||
|
o The touchscreen driver writes to the ads chip every time it
|
||||||
|
samples.
|
||||||
|
o The audio codec must write 16 bits, but the touch chip writes
|
||||||
|
are 8 bits long.
|
||||||
|
o We need to be able to keep these configurations separate while
|
||||||
|
simultaneously active.
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
//#include <linux/sched.h>
|
||||||
|
#include <linux/errno.h>
|
||||||
|
#include <linux/interrupt.h>
|
||||||
|
//#include <linux/ioport.h>
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/delay.h>
|
||||||
|
#include <linux/spinlock.h>
|
||||||
|
|
||||||
|
#include <asm/io.h>
|
||||||
|
#include <asm/irq.h>
|
||||||
|
#include <asm/hardware.h>
|
||||||
|
|
||||||
|
#include <asm/arch/ssp.h>
|
||||||
|
|
||||||
|
//#define TALK
|
||||||
|
|
||||||
|
#if defined (TALK)
|
||||||
|
#define PRINTK(f...) printk (f)
|
||||||
|
#else
|
||||||
|
#define PRINTK(f...) do {} while (0)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined (CONFIG_ARCH_LH7A400)
|
||||||
|
# define CPLD_SPID __REGP16(CPLD06_VIRT) /* SPI data */
|
||||||
|
# define CPLD_SPIC __REGP16(CPLD08_VIRT) /* SPI control */
|
||||||
|
# define CPLD_SPIC_CS_CODEC (1<<0)
|
||||||
|
# define CPLD_SPIC_CS_TOUCH (1<<1)
|
||||||
|
# define CPLD_SPIC_WRITE (0<<2)
|
||||||
|
# define CPLD_SPIC_READ (1<<2)
|
||||||
|
# define CPLD_SPIC_DONE (1<<3) /* r/o */
|
||||||
|
# define CPLD_SPIC_LOAD (1<<4)
|
||||||
|
# define CPLD_SPIC_START (1<<4)
|
||||||
|
# define CPLD_SPIC_LOADED (1<<5) /* r/o */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define CPLD_SPI __REGP16(CPLD0A_VIRT) /* SPI operation */
|
||||||
|
#define CPLD_SPI_CS_EEPROM (1<<3)
|
||||||
|
#define CPLD_SPI_SCLK (1<<2)
|
||||||
|
#define CPLD_SPI_TX_SHIFT (1)
|
||||||
|
#define CPLD_SPI_TX (1<<CPLD_SPI_TX_SHIFT)
|
||||||
|
#define CPLD_SPI_RX_SHIFT (0)
|
||||||
|
#define CPLD_SPI_RX (1<<CPLD_SPI_RX_SHIFT)
|
||||||
|
|
||||||
|
/* *** FIXME: these timing values are substantially larger than the
|
||||||
|
*** chip requires. We may implement an nsleep () function. */
|
||||||
|
#define T_SKH 1 /* Clock time high (us) */
|
||||||
|
#define T_SKL 1 /* Clock time low (us) */
|
||||||
|
#define T_CS 1 /* Minimum chip select low time (us) */
|
||||||
|
#define T_CSS 1 /* Minimum chip select setup time (us) */
|
||||||
|
#define T_DIS 1 /* Data setup time (us) */
|
||||||
|
|
||||||
|
/* EEPROM SPI bits */
|
||||||
|
#define P_START (1<<9)
|
||||||
|
#define P_WRITE (1<<7)
|
||||||
|
#define P_READ (2<<7)
|
||||||
|
#define P_ERASE (3<<7)
|
||||||
|
#define P_EWDS (0<<7)
|
||||||
|
#define P_WRAL (0<<7)
|
||||||
|
#define P_ERAL (0<<7)
|
||||||
|
#define P_EWEN (0<<7)
|
||||||
|
#define P_A_EWDS (0<<5)
|
||||||
|
#define P_A_WRAL (1<<5)
|
||||||
|
#define P_A_ERAL (2<<5)
|
||||||
|
#define P_A_EWEN (3<<5)
|
||||||
|
|
||||||
|
struct ssp_configuration {
|
||||||
|
int device;
|
||||||
|
int mode;
|
||||||
|
int speed;
|
||||||
|
int frame_size_write;
|
||||||
|
int frame_size_read;
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct ssp_configuration ssp_configuration;
|
||||||
|
static spinlock_t ssp_lock;
|
||||||
|
|
||||||
|
static void enable_cs (void)
|
||||||
|
{
|
||||||
|
switch (ssp_configuration.device) {
|
||||||
|
case DEVICE_EEPROM:
|
||||||
|
CPLD_SPI |= CPLD_SPI_CS_EEPROM;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
udelay (T_CSS);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void disable_cs (void)
|
||||||
|
{
|
||||||
|
switch (ssp_configuration.device) {
|
||||||
|
case DEVICE_EEPROM:
|
||||||
|
CPLD_SPI &= ~CPLD_SPI_CS_EEPROM;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
udelay (T_CS);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void pulse_clock (void)
|
||||||
|
{
|
||||||
|
CPLD_SPI |= CPLD_SPI_SCLK;
|
||||||
|
udelay (T_SKH);
|
||||||
|
CPLD_SPI &= ~CPLD_SPI_SCLK;
|
||||||
|
udelay (T_SKL);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/* execute_spi_command
|
||||||
|
|
||||||
|
sends an spi command to a device. It first sends cwrite bits from
|
||||||
|
v. If cread is greater than zero it will read cread bits
|
||||||
|
(discarding the leading 0 bit) and return them. If cread is less
|
||||||
|
than zero it will check for completetion status and return 0 on
|
||||||
|
success or -1 on timeout. If cread is zero it does nothing other
|
||||||
|
than sending the command.
|
||||||
|
|
||||||
|
On the LPD7A400, we can only read or write multiples of 8 bits on
|
||||||
|
the codec and the touch screen device. Here, we round up.
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
static int execute_spi_command (int v, int cwrite, int cread)
|
||||||
|
{
|
||||||
|
unsigned long l = 0;
|
||||||
|
|
||||||
|
#if defined (CONFIG_MACH_LPD7A400)
|
||||||
|
/* The codec and touch devices cannot be bit-banged. Instead,
|
||||||
|
* the CPLD provides an eight-bit shift register and a crude
|
||||||
|
* interface. */
|
||||||
|
if ( ssp_configuration.device == DEVICE_CODEC
|
||||||
|
|| ssp_configuration.device == DEVICE_TOUCH) {
|
||||||
|
int select = 0;
|
||||||
|
|
||||||
|
PRINTK ("spi(%d %d.%d) 0x%04x",
|
||||||
|
ssp_configuration.device, cwrite, cread,
|
||||||
|
v);
|
||||||
|
#if defined (TALK)
|
||||||
|
if (ssp_configuration.device == DEVICE_CODEC)
|
||||||
|
PRINTK (" 0x%03x -> %2d", v & 0x1ff, (v >> 9) & 0x7f);
|
||||||
|
#endif
|
||||||
|
PRINTK ("\n");
|
||||||
|
|
||||||
|
if (ssp_configuration.device == DEVICE_CODEC)
|
||||||
|
select = CPLD_SPIC_CS_CODEC;
|
||||||
|
if (ssp_configuration.device == DEVICE_TOUCH)
|
||||||
|
select = CPLD_SPIC_CS_TOUCH;
|
||||||
|
if (cwrite) {
|
||||||
|
for (cwrite = (cwrite + 7)/8; cwrite-- > 0; ) {
|
||||||
|
CPLD_SPID = (v >> (8*cwrite)) & 0xff;
|
||||||
|
CPLD_SPIC = select | CPLD_SPIC_LOAD;
|
||||||
|
while (!(CPLD_SPIC & CPLD_SPIC_LOADED))
|
||||||
|
;
|
||||||
|
CPLD_SPIC = select;
|
||||||
|
while (!(CPLD_SPIC & CPLD_SPIC_DONE))
|
||||||
|
;
|
||||||
|
}
|
||||||
|
v = 0;
|
||||||
|
}
|
||||||
|
if (cread) {
|
||||||
|
mdelay (2); /* *** FIXME: required by ads7843? */
|
||||||
|
v = 0;
|
||||||
|
for (cread = (cread + 7)/8; cread-- > 0;) {
|
||||||
|
CPLD_SPID = 0;
|
||||||
|
CPLD_SPIC = select | CPLD_SPIC_READ
|
||||||
|
| CPLD_SPIC_START;
|
||||||
|
while (!(CPLD_SPIC & CPLD_SPIC_LOADED))
|
||||||
|
;
|
||||||
|
CPLD_SPIC = select | CPLD_SPIC_READ;
|
||||||
|
while (!(CPLD_SPIC & CPLD_SPIC_DONE))
|
||||||
|
;
|
||||||
|
v = (v << 8) | CPLD_SPID;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
return v;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
PRINTK ("spi(%d) 0x%04x -> 0x%x\r\n", ssp_configuration.device,
|
||||||
|
v & 0x1ff, (v >> 9) & 0x7f);
|
||||||
|
|
||||||
|
enable_cs ();
|
||||||
|
|
||||||
|
v <<= CPLD_SPI_TX_SHIFT; /* Correction for position of SPI_TX bit */
|
||||||
|
while (cwrite--) {
|
||||||
|
CPLD_SPI
|
||||||
|
= (CPLD_SPI & ~CPLD_SPI_TX)
|
||||||
|
| ((v >> cwrite) & CPLD_SPI_TX);
|
||||||
|
udelay (T_DIS);
|
||||||
|
pulse_clock ();
|
||||||
|
}
|
||||||
|
|
||||||
|
if (cread < 0) {
|
||||||
|
int delay = 10;
|
||||||
|
disable_cs ();
|
||||||
|
udelay (1);
|
||||||
|
enable_cs ();
|
||||||
|
|
||||||
|
l = -1;
|
||||||
|
do {
|
||||||
|
if (CPLD_SPI & CPLD_SPI_RX) {
|
||||||
|
l = 0;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
} while (udelay (1), --delay);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
/* We pulse the clock before the data to skip the leading zero. */
|
||||||
|
while (cread-- > 0) {
|
||||||
|
pulse_clock ();
|
||||||
|
l = (l<<1)
|
||||||
|
| (((CPLD_SPI & CPLD_SPI_RX)
|
||||||
|
>> CPLD_SPI_RX_SHIFT) & 0x1);
|
||||||
|
}
|
||||||
|
|
||||||
|
disable_cs ();
|
||||||
|
return l;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ssp_init (void)
|
||||||
|
{
|
||||||
|
spin_lock_init (&ssp_lock);
|
||||||
|
memset (&ssp_configuration, 0, sizeof (ssp_configuration));
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/* ssp_chip_select
|
||||||
|
|
||||||
|
drops the chip select line for the CPLD shift-register controlled
|
||||||
|
devices. It doesn't enable chip
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
static void ssp_chip_select (int enable)
|
||||||
|
{
|
||||||
|
#if defined (CONFIG_MACH_LPD7A400)
|
||||||
|
int select;
|
||||||
|
|
||||||
|
if (ssp_configuration.device == DEVICE_CODEC)
|
||||||
|
select = CPLD_SPIC_CS_CODEC;
|
||||||
|
else if (ssp_configuration.device == DEVICE_TOUCH)
|
||||||
|
select = CPLD_SPIC_CS_TOUCH;
|
||||||
|
else
|
||||||
|
return;
|
||||||
|
|
||||||
|
if (enable)
|
||||||
|
CPLD_SPIC = select;
|
||||||
|
else
|
||||||
|
CPLD_SPIC = 0;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ssp_acquire (void)
|
||||||
|
{
|
||||||
|
spin_lock (&ssp_lock);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ssp_release (void)
|
||||||
|
{
|
||||||
|
ssp_chip_select (0); /* just in case */
|
||||||
|
spin_unlock (&ssp_lock);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ssp_configure (int device, int mode, int speed,
|
||||||
|
int frame_size_write, int frame_size_read)
|
||||||
|
{
|
||||||
|
ssp_configuration.device = device;
|
||||||
|
ssp_configuration.mode = mode;
|
||||||
|
ssp_configuration.speed = speed;
|
||||||
|
ssp_configuration.frame_size_write = frame_size_write;
|
||||||
|
ssp_configuration.frame_size_read = frame_size_read;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ssp_read (void)
|
||||||
|
{
|
||||||
|
return execute_spi_command (0, 0, ssp_configuration.frame_size_read);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ssp_write (u16 data)
|
||||||
|
{
|
||||||
|
execute_spi_command (data, ssp_configuration.frame_size_write, 0);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ssp_write_read (u16 data)
|
||||||
|
{
|
||||||
|
return execute_spi_command (data, ssp_configuration.frame_size_write,
|
||||||
|
ssp_configuration.frame_size_read);
|
||||||
|
}
|
||||||
|
|
||||||
|
struct ssp_driver lh7a40x_cpld_ssp_driver = {
|
||||||
|
.init = ssp_init,
|
||||||
|
.acquire = ssp_acquire,
|
||||||
|
.release = ssp_release,
|
||||||
|
.configure = ssp_configure,
|
||||||
|
.chip_select = ssp_chip_select,
|
||||||
|
.read = ssp_read,
|
||||||
|
.write = ssp_write,
|
||||||
|
.write_read = ssp_write_read,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Marc Singer");
|
||||||
|
MODULE_DESCRIPTION("LPD7A40X CPLD SPI driver");
|
||||||
|
MODULE_LICENSE("GPL");
|
||||||
Loading…
Reference in New Issue