This deletes the realview boardfiles, consolidates a bit

around the Kconfig options and leaves the mach-realview
 directory nice and tidy, with all boards migrated over to
 Device Tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXsg/tAAoJEEEQszewGV1zyKIQAIMr5H6cSuUC2dyhnKbD47ts
 ARfe7AdKEWbdaPTOeJYr3bQXuLgtO+jTiybkbSgQtt+AQYiGhMU6SOSuUDtsyYT0
 hNLsqSBhCkEgQ7m9qjh2N6xCFsEi3ms/BBzQfI3RbMQBHjT3Et6YtUsYv8NpEvse
 O8BfXYcWOpvVvaEchZCdBLovV1wcRtwEKeJQVZybMqic1gr4eBGydxufZB8SvJMl
 raxysVPF0K/2PUeQJtzkj9mc2NO5k733Vid1Vnc2dtP2zO9Su9R7/iKY9IA89+mI
 q5KNkmwv73tdTXkIj9a8XqTStwEoJI45OjP5MVUXHCvr1S4GU4zO/uOyxjP6khqU
 10PYpJhEI+w8bs6IgBRVpT4vnBp3TGhdmtOEGBrxtaiWDhE89XnZVcromhKP7Gfm
 lvbZ5nUCmY/eKLZ8iaTlC/MDALXdAQQ6p7mBw5cnR4dvzQr46nPirVjtn32PHOSV
 a/eJUmu/SK404svNRIU+k+jy5BFCmrQh8dFDR+iRud8zAenLTuxY0B5zzAtt7fIC
 7X48D25c9IRXsh6aiYBxDj1oRT4bRgqhUbTAWH9RFIabS0J1LWdQUnXA7Zz8QhBE
 R0hO0kum2DnnAksjSaIiSDRCEf3qxYIabj5u+tC5jXoVPnYpPAn4wSQq6oTQQAFC
 7dhHfF0F5IyKWuc5kPA/
 =HWSr
 -----END PGP SIGNATURE-----

Merge tag 'realview-broomstick-sweep' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/cleanup

Merge "delete the RealView boardfiles" from Linus Walleij:

This deletes the realview boardfiles, consolidates a bit
around the Kconfig options and leaves the mach-realview
directory nice and tidy, with all boards migrated over to
Device Tree.

* tag 'realview-broomstick-sweep' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: realview: imply device tree boot
  ARM: realview: no need to select SMP_ON_UP explicitly
  ARM: realview: delete the RealView board files
This commit is contained in:
Arnd Bergmann 2016-09-02 18:12:09 +02:00
commit c964cdc369
27 changed files with 19 additions and 3790 deletions

View File

@ -278,10 +278,9 @@ config PHYS_OFFSET
ARCH_INTEGRATOR || \
ARCH_IOP13XX || \
ARCH_KS8695 || \
(ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
ARCH_REALVIEW
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x20000000 if ARCH_S5PV210
default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
default 0xc0000000 if ARCH_SA1100
help
Please provide the physical address corresponding to the

View File

@ -2,35 +2,30 @@ menuconfig ARCH_REALVIEW
bool "ARM Ltd. RealView family"
depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
select CLK_SP810
select COMMON_CLK_VERSATILE
select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
select HAVE_TCM
select ICST
select MACH_REALVIEW_EB if ARCH_MULTI_V5
select MFD_SYSCON
select PLAT_VERSATILE
select PLAT_VERSATILE_SCHED_CLOCK
select POWER_RESET
select POWER_RESET_VERSATILE
select POWER_SUPPLY
select SOC_REALVIEW
select USE_OF
help
This enables support for ARM Ltd RealView boards.
if ARCH_REALVIEW
config REALVIEW_DT
bool "Support RealView(R) Device Tree based boot"
select ARM_GIC
select CLK_SP810
select HAVE_SMP
select ICST
select MACH_REALVIEW_EB if ARCH_MULTI_V5
select MFD_SYSCON
select POWER_RESET
select POWER_RESET_VERSATILE
select POWER_SUPPLY
select SMP_ON_UP if SMP
select SOC_REALVIEW
select USE_OF
help
Include support for booting the ARM(R) RealView(R) evaluation
boards using a device tree machine description.
config MACH_REALVIEW_EB
bool "Support RealView(R) Emulation Baseboard"
select ARM_GIC
@ -60,8 +55,6 @@ config REALVIEW_EB_ARM1176
config REALVIEW_EB_A9MP
bool "Support Multicore Cortex-A9 Tile"
depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
@ -71,30 +64,15 @@ config REALVIEW_EB_A9MP
config REALVIEW_EB_ARM11MP
bool "Support ARM11MPCore Tile"
depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
Enable support for the ARM11MPCore tile fitted to the Realview(R)
Emulation Baseboard platform.
config REALVIEW_EB_ARM11MP_REVB
bool "Support ARM11MPCore RevB Tile"
depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6
help
Enable support for the ARM11MPCore Revision B tile on the
Realview(R) Emulation Baseboard platform. Since there are device
address differences, a kernel built with this option enabled is
not compatible with other revisions of the ARM11MPCore tile.
config MACH_REALVIEW_PB11MP
bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
depends on ARCH_MULTI_V6
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
@ -106,7 +84,6 @@ config MACH_REALVIEW_PB11MP
config MACH_REALVIEW_PB1176
bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
depends on ARCH_MULTI_V6
select ARM_GIC
select CPU_V6
select HAVE_TCM
select MIGHT_HAVE_CACHE_L2X0
@ -114,20 +91,9 @@ config MACH_REALVIEW_PB1176
Include support for the ARM(R) RealView(R) Platform Baseboard for
ARM1176JZF-S.
config REALVIEW_PB1176_SECURE_FLASH
bool "Allow access to the secure flash memory block"
depends on MACH_REALVIEW_PB1176
default n
help
Select this option if Linux will only run in secure mode on the
RealView PB1176 platform and access to the secure flash memory
block (64MB @ 0x3c000000) is required.
config MACH_REALVIEW_PBA8
bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
depends on ARCH_MULTI_V7
select ARM_GIC
select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView Platform Baseboard for
Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has
@ -136,10 +102,6 @@ config MACH_REALVIEW_PBA8
config MACH_REALVIEW_PBX
bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
depends on ARCH_MULTI_V7
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select ZONE_DMA
@ -147,16 +109,4 @@ config MACH_REALVIEW_PBX
Include support for the ARM(R) RealView(R) Platform Baseboard
Explore.
config REALVIEW_HIGH_PHYS_OFFSET
bool "High physical base address for the RealView platform"
depends on MMU && !MACH_REALVIEW_PB1176
default y
help
RealView boards other than PB1176 have the RAM available at
0x70000000, 256MB of which being mirrored at 0x00000000. If
the board supports 512MB of RAM, this option allows the
memory to be accessed contiguously at the high physical
offset. On the PBX board, disabling this option allows 1GB of
RAM to be used with HIGHMEM.
endif

View File

@ -3,16 +3,6 @@
#
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include
obj-y := core.o
obj-$(CONFIG_REALVIEW_DT) += realview-dt.o
obj-y += realview-dt.o
obj-$(CONFIG_SMP) += platsmp-dt.o
ifdef CONFIG_ATAGS
obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o
obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o
obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o
obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o
obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o
obj-$(CONFIG_SMP) += platsmp.o
endif
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o

View File

@ -1,94 +0,0 @@
/*
* Copyright (C) 2007 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_BOARD_EB_H
#define __ASM_ARCH_BOARD_EB_H
#include "platform.h"
/*
* RealView EB + ARM11MPCore peripheral addresses
*/
#define REALVIEW_EB_UART0_BASE 0x10009000 /* UART 0 */
#define REALVIEW_EB_UART1_BASE 0x1000A000 /* UART 1 */
#define REALVIEW_EB_UART2_BASE 0x1000B000 /* UART 2 */
#define REALVIEW_EB_UART3_BASE 0x1000C000 /* UART 3 */
#define REALVIEW_EB_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
#define REALVIEW_EB_WATCHDOG_BASE 0x10010000 /* watchdog interface */
#define REALVIEW_EB_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
#define REALVIEW_EB_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
#define REALVIEW_EB_GPIO0_BASE 0x10013000 /* GPIO port 0 */
#define REALVIEW_EB_RTC_BASE 0x10017000 /* Real Time Clock */
#define REALVIEW_EB_CLCD_BASE 0x10020000 /* CLCD */
#define REALVIEW_EB_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */
#define REALVIEW_EB_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */
#define REALVIEW_EB_SMC_BASE 0x10080000 /* Static memory controller */
#define REALVIEW_EB_FLASH_BASE 0x40000000
#define REALVIEW_EB_FLASH_SIZE SZ_64M
#define REALVIEW_EB_ETH_BASE 0x4E000000 /* Ethernet */
#define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */
#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x10100000
#define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */
#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */
#else
#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000
#define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */
#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */
#endif
#define REALVIEW_EB11MP_PRIV_MEM_SIZE SZ_8K
#define REALVIEW_EB11MP_PRIV_MEM_OFF(x) (REALVIEW_EB11MP_PRIV_MEM_BASE + (x))
#define REALVIEW_EB11MP_SCU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0) /* SCU registers */
#define REALVIEW_EB11MP_GIC_CPU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100) /* Generic interrupt controller CPU interface */
#define REALVIEW_EB11MP_TWD_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600)
#define REALVIEW_EB11MP_GIC_DIST_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000) /* Generic interrupt controller distributor */
/*
* Core tile identification (REALVIEW_SYS_PROCID)
*/
#define REALVIEW_EB_PROC_MASK 0xFF000000
#define REALVIEW_EB_PROC_ARM7TDMI 0x00000000
#define REALVIEW_EB_PROC_ARM9 0x02000000
#define REALVIEW_EB_PROC_ARM11 0x04000000
#define REALVIEW_EB_PROC_ARM11MP 0x06000000
#define REALVIEW_EB_PROC_A9MP 0x0C000000
#define check_eb_proc(proc_type) \
((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \
== proc_type)
#ifdef CONFIG_REALVIEW_EB_ARM11MP
#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
#else
#define core_tile_eb11mp() 0
#endif
#ifdef CONFIG_REALVIEW_EB_A9MP
#define core_tile_a9mp() check_eb_proc(REALVIEW_EB_PROC_A9MP)
#else
#define core_tile_a9mp() 0
#endif
#define machine_is_realview_eb_mp() \
(machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp()))
#endif /* __ASM_ARCH_BOARD_EB_H */

View File

@ -1,81 +0,0 @@
/*
* Copyright (C) 2008 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_BOARD_PB1176_H
#define __ASM_ARCH_BOARD_PB1176_H
#include "platform.h"
/*
* Peripheral addresses
*/
#define REALVIEW_PB1176_UART4_BASE 0x10009000 /* UART 4 */
#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */
#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */
#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */
#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
#define REALVIEW_PB1176_FLASH_BASE 0x30000000
#define REALVIEW_PB1176_FLASH_SIZE SZ_64M
#define REALVIEW_PB1176_SEC_FLASH_BASE 0x3C000000 /* Secure flash */
#define REALVIEW_PB1176_SEC_FLASH_SIZE SZ_64M
#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */
#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */
#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */
#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */
#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */
#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */
#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */
#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */
#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */
#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */
#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */
#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */
#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */
#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */
/*
* PCI regions
*/
#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */
#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */
#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */
#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */
#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */
#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */
#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */
#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */
#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */
#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */
#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */
#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */
#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */
#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */
#define REALVIEW_DC1176_ROM_BASE 0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */
#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */
#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */
#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
/*
* Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
*/
#define REALVIEW_PB1176_SYS_SOFT_RESET 0x0100
#endif /* __ASM_ARCH_BOARD_PB1176_H */

View File

@ -1,96 +0,0 @@
/*
* Copyright (C) 2008 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_BOARD_PB11MP_H
#define __ASM_ARCH_BOARD_PB11MP_H
#include "platform.h"
/*
* Peripheral addresses
*/
#define REALVIEW_PB11MP_UART0_BASE 0x10009000 /* UART 0 */
#define REALVIEW_PB11MP_UART1_BASE 0x1000A000 /* UART 1 */
#define REALVIEW_PB11MP_UART2_BASE 0x1000B000 /* UART 2 */
#define REALVIEW_PB11MP_UART3_BASE 0x1000C000 /* UART 3 */
#define REALVIEW_PB11MP_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
#define REALVIEW_PB11MP_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */
#define REALVIEW_PB11MP_WATCHDOG_BASE 0x10010000 /* watchdog interface */
#define REALVIEW_PB11MP_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
#define REALVIEW_PB11MP_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
#define REALVIEW_PB11MP_GPIO0_BASE 0x10013000 /* GPIO port 0 */
#define REALVIEW_PB11MP_RTC_BASE 0x10017000 /* Real Time Clock */
#define REALVIEW_PB11MP_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */
#define REALVIEW_PB11MP_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */
#define REALVIEW_PB11MP_SCTL_BASE 0x1001A000 /* System Controller */
#define REALVIEW_PB11MP_CLCD_BASE 0x10020000 /* CLCD */
#define REALVIEW_PB11MP_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */
#define REALVIEW_PB11MP_DMC_BASE 0x100E0000 /* DMC configuration */
#define REALVIEW_PB11MP_SMC_BASE 0x100E1000 /* SMC configuration */
#define REALVIEW_PB11MP_CAN_BASE 0x100E2000 /* CAN bus */
#define REALVIEW_PB11MP_CF_BASE 0x18000000 /* Compact flash */
#define REALVIEW_PB11MP_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */
#define REALVIEW_PB11MP_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
#define REALVIEW_PB11MP_FLASH0_BASE 0x40000000
#define REALVIEW_PB11MP_FLASH0_SIZE SZ_64M
#define REALVIEW_PB11MP_FLASH1_BASE 0x44000000
#define REALVIEW_PB11MP_FLASH1_SIZE SZ_64M
#define REALVIEW_PB11MP_ETH_BASE 0x4E000000 /* Ethernet */
#define REALVIEW_PB11MP_USB_BASE 0x4F000000 /* USB */
#define REALVIEW_PB11MP_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */
#define REALVIEW_PB11MP_LT_BASE 0xC0000000 /* Logic Tile expansion */
#define REALVIEW_PB11MP_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */
#define REALVIEW_PB11MP_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */
#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74
/*
* PB11MPCore PCI regions
*/
#define REALVIEW_PB11MP_PCI_BASE 0x90040000 /* PCI-X Unit base */
#define REALVIEW_PB11MP_PCI_IO_BASE 0x90050000 /* IO Region on AHB */
#define REALVIEW_PB11MP_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */
#define REALVIEW_PB11MP_PCI_BASE_SIZE 0x10000 /* 16 Kb */
#define REALVIEW_PB11MP_PCI_IO_SIZE 0x1000 /* 4 Kb */
#define REALVIEW_PB11MP_PCI_MEM_SIZE 0x20000000 /* 512 MB */
/*
* Testchip peripheral and fpga gic regions
*/
#define REALVIEW_TC11MP_PRIV_MEM_BASE 0x1F000000
#define REALVIEW_TC11MP_PRIV_MEM_SIZE SZ_8K
#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */
#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */
#define REALVIEW_TC11MP_TWD_BASE 0x1F000600
#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */
#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */
/*
* Values for REALVIEW_SYS_RESET_CTRL
*/
#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR 0x01
#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT 0x02
#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET 0x03
#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET 0x04
#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR 0x05
#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC 0x06
#define REALVIEW_PB11MP_SYS_CTRL_LED (1 << 0)
#endif /* __ASM_ARCH_BOARD_PB11MP_H */

View File

@ -1,71 +0,0 @@
/*
* Copyright (C) 2008 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_BOARD_PBA8_H
#define __ASM_ARCH_BOARD_PBA8_H
#include "platform.h"
/*
* Peripheral addresses
*/
#define REALVIEW_PBA8_UART0_BASE 0x10009000 /* UART 0 */
#define REALVIEW_PBA8_UART1_BASE 0x1000A000 /* UART 1 */
#define REALVIEW_PBA8_UART2_BASE 0x1000B000 /* UART 2 */
#define REALVIEW_PBA8_UART3_BASE 0x1000C000 /* UART 3 */
#define REALVIEW_PBA8_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
#define REALVIEW_PBA8_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */
#define REALVIEW_PBA8_WATCHDOG_BASE 0x10010000 /* watchdog interface */
#define REALVIEW_PBA8_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
#define REALVIEW_PBA8_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
#define REALVIEW_PBA8_GPIO0_BASE 0x10013000 /* GPIO port 0 */
#define REALVIEW_PBA8_RTC_BASE 0x10017000 /* Real Time Clock */
#define REALVIEW_PBA8_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */
#define REALVIEW_PBA8_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */
#define REALVIEW_PBA8_SCTL_BASE 0x1001A000 /* System Controller */
#define REALVIEW_PBA8_CLCD_BASE 0x10020000 /* CLCD */
#define REALVIEW_PBA8_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */
#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */
#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */
#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */
#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
#define REALVIEW_PBA8_FLASH0_BASE 0x40000000
#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M
#define REALVIEW_PBA8_FLASH1_BASE 0x44000000
#define REALVIEW_PBA8_FLASH1_SIZE SZ_64M
#define REALVIEW_PBA8_ETH_BASE 0x4E000000 /* Ethernet */
#define REALVIEW_PBA8_USB_BASE 0x4F000000 /* USB */
#define REALVIEW_PBA8_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */
#define REALVIEW_PBA8_LT_BASE 0xC0000000 /* Logic Tile expansion */
#define REALVIEW_PBA8_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */
#define REALVIEW_PBA8_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */
#define REALVIEW_PBA8_SYS_PLD_CTRL1 0x74
/*
* PBA8 PCI regions
*/
#define REALVIEW_PBA8_PCI_BASE 0x90040000 /* PCI-X Unit base */
#define REALVIEW_PBA8_PCI_IO_BASE 0x90050000 /* IO Region on AHB */
#define REALVIEW_PBA8_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */
#define REALVIEW_PBA8_PCI_BASE_SIZE 0x10000 /* 16 Kb */
#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */
#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */
#endif /* __ASM_ARCH_BOARD_PBA8_H */

View File

@ -1,106 +0,0 @@
/*
* Copyright (C) 2009 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_BOARD_PBX_H
#define __ASM_ARCH_BOARD_PBX_H
#include "platform.h"
/*
* Peripheral addresses
*/
#define REALVIEW_PBX_UART0_BASE 0x10009000 /* UART 0 */
#define REALVIEW_PBX_UART1_BASE 0x1000A000 /* UART 1 */
#define REALVIEW_PBX_UART2_BASE 0x1000B000 /* UART 2 */
#define REALVIEW_PBX_UART3_BASE 0x1000C000 /* UART 3 */
#define REALVIEW_PBX_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
#define REALVIEW_PBX_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */
#define REALVIEW_PBX_WATCHDOG_BASE 0x10010000 /* watchdog interface */
#define REALVIEW_PBX_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
#define REALVIEW_PBX_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
#define REALVIEW_PBX_GPIO0_BASE 0x10013000 /* GPIO port 0 */
#define REALVIEW_PBX_RTC_BASE 0x10017000 /* Real Time Clock */
#define REALVIEW_PBX_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */
#define REALVIEW_PBX_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */
#define REALVIEW_PBX_SCTL_BASE 0x1001A000 /* System Controller */
#define REALVIEW_PBX_CLCD_BASE 0x10020000 /* CLCD */
#define REALVIEW_PBX_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */
#define REALVIEW_PBX_DMC_BASE 0x100E0000 /* DMC configuration */
#define REALVIEW_PBX_SMC_BASE 0x100E1000 /* SMC configuration */
#define REALVIEW_PBX_CAN_BASE 0x100E2000 /* CAN bus */
#define REALVIEW_PBX_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
#define REALVIEW_PBX_FLASH0_BASE 0x40000000
#define REALVIEW_PBX_FLASH0_SIZE SZ_64M
#define REALVIEW_PBX_FLASH1_BASE 0x44000000
#define REALVIEW_PBX_FLASH1_SIZE SZ_64M
#define REALVIEW_PBX_ETH_BASE 0x4E000000 /* Ethernet */
#define REALVIEW_PBX_USB_BASE 0x4F000000 /* USB */
#define REALVIEW_PBX_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */
#define REALVIEW_PBX_LT_BASE 0xC0000000 /* Logic Tile expansion */
#define REALVIEW_PBX_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */
#define REALVIEW_PBX_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */
/*
* Tile-specific addresses
*/
#define REALVIEW_PBX_TILE_SCU_BASE 0x1F000000 /* SCU registers */
#define REALVIEW_PBX_TILE_GIC_CPU_BASE 0x1F000100 /* Private Generic interrupt controller CPU interface */
#define REALVIEW_PBX_TILE_TWD_BASE 0x1F000600
#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE 0x1F000700
#define REALVIEW_PBX_TILE_TWD_SIZE 0x00000100
#define REALVIEW_PBX_TILE_GIC_DIST_BASE 0x1F001000 /* Private Generic interrupt controller distributor */
#define REALVIEW_PBX_TILE_L220_BASE 0x1F002000 /* L220 registers */
#define REALVIEW_PBX_SYS_PLD_CTRL1 0x74
/*
* PBX PCI regions
*/
#define REALVIEW_PBX_PCI_BASE 0x90040000 /* PCI-X Unit base */
#define REALVIEW_PBX_PCI_IO_BASE 0x90050000 /* IO Region on AHB */
#define REALVIEW_PBX_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */
#define REALVIEW_PBX_PCI_BASE_SIZE 0x10000 /* 16 Kb */
#define REALVIEW_PBX_PCI_IO_SIZE 0x1000 /* 4 Kb */
#define REALVIEW_PBX_PCI_MEM_SIZE 0x20000000 /* 512 MB */
/*
* Core tile identification (REALVIEW_SYS_PROCID)
*/
#define REALVIEW_PBX_PROC_MASK 0xFF000000
#define REALVIEW_PBX_PROC_ARM7TDMI 0x00000000
#define REALVIEW_PBX_PROC_ARM9 0x02000000
#define REALVIEW_PBX_PROC_ARM11 0x04000000
#define REALVIEW_PBX_PROC_ARM11MP 0x06000000
#define REALVIEW_PBX_PROC_A9MP 0x0C000000
#define REALVIEW_PBX_PROC_A8 0x0E000000
#define check_pbx_proc(proc_type) \
((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
== proc_type)
#ifdef CONFIG_MACH_REALVIEW_PBX
#define core_tile_pbx11mp() check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
#define core_tile_pbxa9mp() check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
#define core_tile_pbxa8() check_pbx_proc(REALVIEW_PBX_PROC_A8)
#else
#define core_tile_pbx11mp() 0
#define core_tile_pbxa9mp() 0
#define core_tile_pbxa8() 0
#endif
#endif /* __ASM_ARCH_BOARD_PBX_H */

View File

@ -1,404 +0,0 @@
/*
* linux/arch/arm/mach-realview/core.c
*
* Copyright (C) 1999 - 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/smc91x.h>
#include <linux/ata_platform.h>
#include <linux/amba/mmci.h>
#include <linux/gfp.h>
#include <linux/mtd/physmap.h>
#include <linux/memblock.h>
#include <clocksource/timer-sp804.h>
#include "hardware.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware/icst.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include "platform.h"
#include <plat/sched_clock.h>
#include "core.h"
#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
static void realview_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
val = __raw_readl(REALVIEW_FLASHCTRL);
if (on)
val |= REALVIEW_FLASHPROG_FLVPPEN;
else
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
__raw_writel(val, REALVIEW_FLASHCTRL);
}
static struct physmap_flash_data realview_flash_data = {
.width = 4,
.set_vpp = realview_flash_set_vpp,
};
struct platform_device realview_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &realview_flash_data,
},
};
int realview_flash_register(struct resource *res, u32 num)
{
realview_flash_device.resource = res;
realview_flash_device.num_resources = num;
return platform_device_register(&realview_flash_device);
}
static struct smsc911x_platform_config smsc911x_config = {
.flags = SMSC911X_USE_32BIT,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct smc91x_platdata smc91x_platdata = {
.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
};
static struct platform_device realview_eth_device = {
.name = "smsc911x",
.id = 0,
.num_resources = 2,
};
int realview_eth_register(const char *name, struct resource *res)
{
if (name)
realview_eth_device.name = name;
realview_eth_device.resource = res;
if (strcmp(realview_eth_device.name, "smsc911x") == 0)
realview_eth_device.dev.platform_data = &smsc911x_config;
else
realview_eth_device.dev.platform_data = &smc91x_platdata;
return platform_device_register(&realview_eth_device);
}
struct platform_device realview_usb_device = {
.name = "isp1760",
.num_resources = 2,
};
int realview_usb_register(struct resource *res)
{
realview_usb_device.resource = res;
return platform_device_register(&realview_usb_device);
}
static struct pata_platform_info pata_platform_data = {
.ioport_shift = 1,
};
static struct resource pata_resources[] = {
[0] = {
.start = REALVIEW_CF_BASE,
.end = REALVIEW_CF_BASE + 0xff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = REALVIEW_CF_BASE + 0x100,
.end = REALVIEW_CF_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device realview_cf_device = {
.name = "pata_platform",
.id = -1,
.num_resources = ARRAY_SIZE(pata_resources),
.resource = pata_resources,
.dev = {
.platform_data = &pata_platform_data,
},
};
static struct resource realview_leds_resources[] = {
{
.start = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET,
.end = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET + 4,
.flags = IORESOURCE_MEM,
},
};
struct platform_device realview_leds_device = {
.name = "versatile-leds",
.id = -1,
.num_resources = ARRAY_SIZE(realview_leds_resources),
.resource = realview_leds_resources,
};
static struct resource realview_i2c_resource = {
.start = REALVIEW_I2C_BASE,
.end = REALVIEW_I2C_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
};
struct platform_device realview_i2c_device = {
.name = "versatile-i2c",
.id = 0,
.num_resources = 1,
.resource = &realview_i2c_resource,
};
static struct i2c_board_info realview_i2c_board_info[] = {
{
I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
},
};
static int __init realview_i2c_init(void)
{
return i2c_register_board_info(0, realview_i2c_board_info,
ARRAY_SIZE(realview_i2c_board_info));
}
arch_initcall(realview_i2c_init);
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
/*
* This is only used if GPIOLIB support is disabled
*/
static unsigned int realview_mmc_status(struct device *dev)
{
struct amba_device *adev = container_of(dev, struct amba_device, dev);
u32 mask;
if (machine_is_realview_pb1176()) {
static bool inserted = false;
/*
* The PB1176 does not have the status register,
* assume it is inserted at startup, then invert
* for each call so card insertion/removal will
* be detected anyway. This will not be called if
* GPIO on PL061 is active, which is the proper
* way to do this on the PB1176.
*/
inserted = !inserted;
return inserted ? 0 : 1;
}
if (adev->res.start == REALVIEW_MMCI0_BASE)
mask = 1;
else
mask = 2;
return readl(REALVIEW_SYSMCI) & mask;
}
struct mmci_platform_data realview_mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
.gpio_wp = 17,
.gpio_cd = 16,
.cd_invert = true,
};
struct mmci_platform_data realview_mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
.gpio_wp = 19,
.gpio_cd = 18,
.cd_invert = true,
};
void __init realview_init_early(void)
{
void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
}
/*
* CLCD support.
*/
#define SYS_CLCD_NLCDIOON (1 << 2)
#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
#define SYS_CLCD_ID_MASK (0x1f << 8)
#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
#define SYS_CLCD_ID_VGA (0x1f << 8)
/*
* Disable all display connectors on the interface module.
*/
static void realview_clcd_disable(struct clcd_fb *fb)
{
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
writel(val, sys_clcd);
}
/*
* Enable the relevant connector on the interface module.
*/
static void realview_clcd_enable(struct clcd_fb *fb)
{
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
u32 val;
/*
* Enable the PSUs
*/
val = readl(sys_clcd);
val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
writel(val, sys_clcd);
}
/*
* Detect which LCD panel is connected, and return the appropriate
* clcd_panel structure. Note: we do not have any information on
* the required timings for the 8.4in panel, so we presently assume
* VGA timings.
*/
static int realview_clcd_setup(struct clcd_fb *fb)
{
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
const char *panel_name, *vga_panel_name;
unsigned long framesize;
u32 val;
if (machine_is_realview_eb()) {
/* VGA, 16bpp */
framesize = 640 * 480 * 2;
vga_panel_name = "VGA";
} else {
/* XVGA, 16bpp */
framesize = 1024 * 768 * 2;
vga_panel_name = "XVGA";
}
val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
if (val == SYS_CLCD_ID_SANYO_3_8)
panel_name = "Sanyo TM38QV67A02A";
else if (val == SYS_CLCD_ID_SANYO_2_5)
panel_name = "Sanyo QVGA Portrait";
else if (val == SYS_CLCD_ID_EPSON_2_2)
panel_name = "Epson L2F50113T00";
else if (val == SYS_CLCD_ID_VGA)
panel_name = vga_panel_name;
else {
pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val);
panel_name = vga_panel_name;
}
fb->panel = versatile_clcd_get_panel(panel_name);
if (!fb->panel)
return -EINVAL;
return versatile_clcd_setup_dma(fb, framesize);
}
struct clcd_board clcd_plat_data = {
.name = "RealView",
.caps = CLCD_CAP_ALL,
.check = clcdfb_check,
.decode = clcdfb_decode,
.disable = realview_clcd_disable,
.enable = realview_clcd_enable,
.setup = realview_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
};
/*
* Where is the timer (VA)?
*/
void __iomem *timer0_va_base;
void __iomem *timer1_va_base;
void __iomem *timer2_va_base;
void __iomem *timer3_va_base;
/*
* Set up the clock source and clock events devices
*/
void __init realview_timer_init(unsigned int timer_irq)
{
u32 val;
/*
* set clock frequency:
* REALVIEW_REFCLK is 32KHz
* REALVIEW_TIMCLK is 1MHz
*/
val = readl(__io_address(REALVIEW_SCTL_BASE));
writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
(REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) |
(REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
(REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
__io_address(REALVIEW_SCTL_BASE));
/*
* Initialise to a known state (all timers off)
*/
sp804_timer_disable(timer0_va_base);
sp804_timer_disable(timer1_va_base);
sp804_timer_disable(timer2_va_base);
sp804_timer_disable(timer3_va_base);
sp804_clocksource_init(timer3_va_base, "timer3");
sp804_clockevents_init(timer0_va_base, timer_irq, "timer0");
}
/*
* Setup the memory banks.
*/
void realview_fixup(struct tag *tags, char **from)
{
/*
* Most RealView platforms have 512MB contiguous RAM at 0x70000000.
* Half of this is mirrored at 0.
*/
#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
memblock_add(0x70000000, SZ_512M);
#else
memblock_add(0, SZ_256M);
#endif
}

View File

@ -1,58 +0,0 @@
/*
* Copyright (C) 2004 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_REALVIEW_H
#define __ASM_ARCH_REALVIEW_H
#include <linux/amba/bus.h>
#include <linux/io.h>
#include <asm/setup.h>
#define APB_DEVICE(name, busid, base, plat) \
static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
#define AHB_DEVICE(name, busid, base, plat) \
static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
struct machine_desc;
extern struct platform_device realview_flash_device;
extern struct platform_device realview_cf_device;
extern struct platform_device realview_leds_device;
extern struct platform_device realview_i2c_device;
extern struct mmci_platform_data realview_mmc0_plat_data;
extern struct mmci_platform_data realview_mmc1_plat_data;
extern struct clcd_board clcd_plat_data;
extern void __iomem *timer0_va_base;
extern void __iomem *timer1_va_base;
extern void __iomem *timer2_va_base;
extern void __iomem *timer3_va_base;
extern void realview_timer_init(unsigned int timer_irq);
extern int realview_flash_register(struct resource *res, u32 num);
extern int realview_eth_register(const char *name, struct resource *res);
extern int realview_usb_register(struct resource *res);
extern void realview_init_early(void);
extern void realview_fixup(struct tag *tags, char **from);
extern const struct smp_operations realview_smp_ops;
extern void realview_cpu_die(unsigned int cpu);
#endif

View File

@ -1,40 +0,0 @@
/*
* This file contains the hardware definitions of the RealView boards.
*
* Copyright (C) 2003 ARM Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
/* macro to get at IO space when running virtually */
#ifdef CONFIG_MMU
/*
* Statically mapped addresses:
*
* 10xx xxxx -> fbxx xxxx
* 1exx xxxx -> fdxx xxxx
* 1fxx xxxx -> fexx xxxx
*/
#define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000)
#else
#define IO_ADDRESS(x) (x)
#endif
#define __io_address(n) IOMEM(IO_ADDRESS(n))
#endif

View File

@ -0,0 +1 @@
void realview_cpu_die(unsigned int cpu);

View File

@ -1,114 +0,0 @@
/*
* Copyright (C) 2007 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __MACH_IRQS_EB_H
#define __MACH_IRQS_EB_H
#define IRQ_LOCALTIMER 29
#define IRQ_EB_GIC_START 32
/*
* RealView EB interrupt sources
*/
#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */
#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */
#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */
#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */
#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */
#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */
#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */
#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */
#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */
/* 9 reserved */
#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */
#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */
#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */
#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */
#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */
#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */
#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */
#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */
#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */
#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */
#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */
#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */
#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */
#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */
#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */
#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */
#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */
#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */
#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */
#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */
#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */
#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */
/*
* RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
*/
#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0)
#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1)
#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2)
#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3)
#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4)
#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5)
#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6)
#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7)
#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8)
#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9)
#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */
#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */
#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */
#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */
#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14)
#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15)
#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17)
#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18)
#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19)
#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20)
#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21)
#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22)
#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23)
#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24)
#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25)
#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26)
#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27)
#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28)
#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29)
#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30)
#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31)
/*
* The 11MPcore tile leaves the following unconnected.
*/
#define IRQ_EB11MP_UART2 0
#define IRQ_EB11MP_UART3 0
#define IRQ_EB11MP_CLCD 0
#define IRQ_EB11MP_DMA 0
#define IRQ_EB11MP_WDOG 0
#define IRQ_EB11MP_GPIO0 0
#define IRQ_EB11MP_GPIO1 0
#define IRQ_EB11MP_GPIO2 0
#define IRQ_EB11MP_SCI 0
#define IRQ_EB11MP_SSP 0
#define NR_GIC_EB11MP 2
#endif /* __MACH_IRQS_EB_H */

View File

@ -1,77 +0,0 @@
/*
* Copyright (C) 2008 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __MACH_IRQS_PB1176_H
#define __MACH_IRQS_PB1176_H
#define IRQ_DC1176_GIC_START 32
#define IRQ_PB1176_GIC_START 64
/*
* ARM1176 DevChip interrupt sources (primary GIC)
*/
#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */
#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */
#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */
#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */
#define IRQ_DC1176_CORE_PMU (IRQ_DC1176_GIC_START + 7) /* Core PMU interrupt */
#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */
#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */
#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */
#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11)
#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12)
#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16)
#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */
#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */
#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */
#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */
#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */
/*
* RealView PB1176 interrupt sources (secondary GIC)
*/
#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */
#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */
#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */
#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */
#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5)
#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */
#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */
#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8)
#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9)
#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */
#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */
#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16)
#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */
#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22)
#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23)
#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
#define IRQ_PB1176_SCTL -1
#endif /* __MACH_IRQS_PB1176_H */

View File

@ -1,97 +0,0 @@
/*
* Copyright (C) 2008 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __MACH_IRQS_PB11MP_H
#define __MACH_IRQS_PB11MP_H
#define IRQ_LOCALTIMER 29
#define IRQ_TC11MP_GIC_START 32
#define IRQ_PB11MP_GIC_START 64
/*
* ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
*/
#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0)
#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1)
#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2)
#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3)
#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4)
#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5)
#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6)
#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7)
#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8)
#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9)
#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */
#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */
#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */
#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */
#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14)
#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15)
#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17)
#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18)
#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19)
#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20)
#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21)
#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22)
#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23)
#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24)
#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25)
#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26)
#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27)
#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28)
#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29)
#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30)
#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31)
/*
* RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
*/
#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */
#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */
#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */
#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */
#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */
#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */
#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */
/* 9 reserved */
#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */
#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */
#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */
#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */
#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */
#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */
#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */
#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */
#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */
#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */
#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */
#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */
#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */
#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */
#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */
#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */
#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */
#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */
#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */
#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */
#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */
#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */
#endif /* __MACH_IRQS_PB11MP_H */

View File

@ -1,71 +0,0 @@
/*
* Copyright (C) 2008 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __MACH_IRQS_PBA8_H
#define __MACH_IRQS_PBA8_H
#define IRQ_PBA8_GIC_START 32
/*
* PB-A8 on-board gic irq sources
*/
#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */
#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */
#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */
#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */
#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */
#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */
#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */
#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */
#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */
/* 9 reserved */
#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */
#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */
#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */
#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */
#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */
#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */
#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */
#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */
#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */
#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */
#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */
#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */
#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */
#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */
#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */
#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */
#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */
#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */
#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */
#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */
#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */
#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */
#define IRQ_PBA8_PMU (IRQ_PBA8_GIC_START + 47) /* Cortex-A8 PMU */
/* ... */
#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50)
#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51)
#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52)
#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53)
#define IRQ_PBA8_SMC -1
#define IRQ_PBA8_SCTL -1
#endif /* __MACH_IRQS_PBA8_H */

View File

@ -1,87 +0,0 @@
/*
* Copyright (C) 2009 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __MACH_IRQS_PBX_H
#define __MACH_IRQS_PBX_H
#define IRQ_LOCALTIMER 29
#define IRQ_PBX_GIC_START 32
/*
* PBX on-board gic irq sources
*/
#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */
#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */
#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */
#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */
#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */
#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */
#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */
#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */
#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */
/* 9 reserved */
#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */
#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */
#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */
#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */
#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */
#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */
#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */
#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */
#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */
#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */
#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */
#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */
#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */
#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */
#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */
#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */
#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */
#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */
#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */
#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */
#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */
#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */
#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */
#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33)
#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34)
#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35)
#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36)
#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37)
#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38)
#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39)
#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */
#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */
#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */
/* ... */
#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */
#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 45)
#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 46)
#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 47)
/* ... */
#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50)
#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51)
#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52)
#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53)
#define IRQ_PBX_SMC -1
#define IRQ_PBX_SCTL -1
#endif /* __MACH_IRQS_PBX_H */

View File

@ -1,247 +0,0 @@
/*
* Copyright (c) ARM Limited 2003. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_PLATFORM_H
#define __ASM_ARCH_PLATFORM_H
/*
* Memory definitions
*/
#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/
#define REALVIEW_BOOT_ROM_HI 0x30000000
#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */
#define REALVIEW_BOOT_ROM_SIZE SZ_64M
#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */
#define REALVIEW_SSRAM_SIZE SZ_2M
/*
* SDRAM
*/
#define REALVIEW_SDRAM_BASE 0x00000000
/*
* Logic expansion modules
*
*/
/* ------------------------------------------------------------------------
* RealView Registers
* ------------------------------------------------------------------------
*
*/
#define REALVIEW_SYS_ID_OFFSET 0x00
#define REALVIEW_SYS_SW_OFFSET 0x04
#define REALVIEW_SYS_LED_OFFSET 0x08
#define REALVIEW_SYS_OSC0_OFFSET 0x0C
#define REALVIEW_SYS_OSC1_OFFSET 0x10
#define REALVIEW_SYS_OSC2_OFFSET 0x14
#define REALVIEW_SYS_OSC3_OFFSET 0x18
#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */
#define REALVIEW_SYS_LOCK_OFFSET 0x20
#define REALVIEW_SYS_100HZ_OFFSET 0x24
#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28
#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C
#define REALVIEW_SYS_FLAGS_OFFSET 0x30
#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30
#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34
#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38
#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38
#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C
#define REALVIEW_SYS_RESETCTL_OFFSET 0x40
#define REALVIEW_SYS_PCICTL_OFFSET 0x44
#define REALVIEW_SYS_MCI_OFFSET 0x48
#define REALVIEW_SYS_FLASH_OFFSET 0x4C
#define REALVIEW_SYS_CLCD_OFFSET 0x50
#define REALVIEW_SYS_CLCDSER_OFFSET 0x54
#define REALVIEW_SYS_BOOTCS_OFFSET 0x58
#define REALVIEW_SYS_24MHz_OFFSET 0x5C
#define REALVIEW_SYS_MISC_OFFSET 0x60
#define REALVIEW_SYS_IOSEL_OFFSET 0x70
#define REALVIEW_SYS_PROCID_OFFSET 0x84
#define REALVIEW_SYS_TEST_OSC0_OFFSET 0xC0
#define REALVIEW_SYS_TEST_OSC1_OFFSET 0xC4
#define REALVIEW_SYS_TEST_OSC2_OFFSET 0xC8
#define REALVIEW_SYS_TEST_OSC3_OFFSET 0xCC
#define REALVIEW_SYS_TEST_OSC4_OFFSET 0xD0
#define REALVIEW_SYS_BASE 0x10000000
#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
#define REALVIEW_SYS_PROCID (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
/* ------------------------------------------------------------------------
* RealView control registers
* ------------------------------------------------------------------------
*/
/*
* REALVIEW_IDFIELD
*
* 31:24 = manufacturer (0x41 = ARM)
* 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
* 15:12 = FPGA (0x3 = XVC600 or XVC600E)
* 11:4 = build value
* 3:0 = revision number (0x1 = rev B (AHB))
*/
/*
* REALVIEW_SYS_LOCK
* control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL,
* SYS_CLD, SYS_BOOTCS
*/
#define REALVIEW_SYS_LOCK_LOCKED (1 << 16)
#define REALVIEW_SYS_LOCK_VAL 0xA05F /* Enable write access */
/*
* REALVIEW_SYS_FLASH
*/
#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */
/*
* REALVIEW_INTREG
* - used to acknowledge and control MMCI and UART interrupts
*/
#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */
#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */
#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */
/* write 1 to acknowledge and clear */
#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */
#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */
/*
* RealView common peripheral addresses
*/
#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */
#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */
#define REALVIEW_AACI_BASE 0x10004000 /* Audio */
#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */
#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */
#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */
#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */
#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */
#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */
#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */
#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */
#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */
/* PCI space */
#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */
#define REALVIEW_PCI_CFG_BASE 0x42000000
#define REALVIEW_PCI_MEM_BASE0 0x44000000
#define REALVIEW_PCI_MEM_BASE1 0x50000000
#define REALVIEW_PCI_MEM_BASE2 0x60000000
/* Sizes of above maps */
#define REALVIEW_PCI_BASE_SIZE 0x01000000
#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000
#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */
#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */
#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */
#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */
/*
* CompactFlash
*/
#define REALVIEW_CF_BASE 0x18000000 /* CompactFlash */
#define REALVIEW_CF_MEM_BASE 0x18003000 /* SMC for CompactFlash */
/*
* Disk on Chip
*/
#define REALVIEW_DOC_BASE 0x2C000000
#define REALVIEW_DOC_SIZE (16 << 20)
#define REALVIEW_DOC_PAGE_SIZE 512
#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE)
#define ERASE_UNIT_PAGES 32
#define START_PAGE 0x80
/*
* LED settings, bits [7:0]
*/
#define REALVIEW_SYS_LED0 (1 << 0)
#define REALVIEW_SYS_LED1 (1 << 1)
#define REALVIEW_SYS_LED2 (1 << 2)
#define REALVIEW_SYS_LED3 (1 << 3)
#define REALVIEW_SYS_LED4 (1 << 4)
#define REALVIEW_SYS_LED5 (1 << 5)
#define REALVIEW_SYS_LED6 (1 << 6)
#define REALVIEW_SYS_LED7 (1 << 7)
#define ALL_LEDS 0xFF
#define LED_BANK REALVIEW_SYS_LED
/*
* Control registers
*/
#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */
#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */
#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */
#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */
/*
* System controller bit assignment
*/
#define REALVIEW_REFCLK 0
#define REALVIEW_TIMCLK 1
#define REALVIEW_TIMER1_EnSel 15
#define REALVIEW_TIMER2_EnSel 17
#define REALVIEW_TIMER3_EnSel 19
#define REALVIEW_TIMER4_EnSel 21
#define REALVIEW_CSR_BASE 0x10000000
#define REALVIEW_CSR_SIZE 0x10000000
#endif /* __ASM_ARCH_PLATFORM_H */

View File

@ -17,8 +17,7 @@
#include <asm/smp_scu.h>
#include <plat/platsmp.h>
#include "core.h"
#include "hotplug.h"
#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30

View File

@ -1,86 +0,0 @@
/*
* linux/arch/arm/mach-realview/platsmp.c
*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <linux/io.h>
#include "hardware.h"
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
#include "board-eb.h"
#include "board-pb11mp.h"
#include "board-pbx.h"
#include <plat/platsmp.h>
#include "core.h"
static void __iomem *scu_base_addr(void)
{
if (machine_is_realview_eb_mp())
return __io_address(REALVIEW_EB11MP_SCU_BASE);
else if (machine_is_realview_pb11mp())
return __io_address(REALVIEW_TC11MP_SCU_BASE);
else if (machine_is_realview_pbx() &&
(core_tile_pbx11mp() || core_tile_pbxa9mp()))
return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
else
return (void __iomem *)0;
}
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
static void __init realview_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
}
static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base_addr());
/*
* Write the address of secondary startup into the
* system-wide flags register. The BootMonitor waits
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
__raw_writel(virt_to_phys(versatile_secondary_startup),
__io_address(REALVIEW_SYS_FLAGSSET));
}
const struct smp_operations realview_smp_ops __initconst = {
.smp_init_cpus = realview_smp_init_cpus,
.smp_prepare_cpus = realview_smp_prepare_cpus,
.smp_secondary_init = versatile_secondary_init,
.smp_boot_secondary = versatile_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = realview_cpu_die,
#endif
};

View File

@ -1,492 +0,0 @@
/*
* linux/arch/arm/mach-realview/realview_eb.c
*
* Copyright (C) 2004 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <linux/reboot.h>
#include "hardware.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/smp_twd.h>
#include <asm/system_info.h>
#include <asm/outercache.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "board-eb.h"
#include "irqs-eb.h"
#include "core.h"
static struct map_desc realview_eb_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(REALVIEW_SYS_BASE),
.pfn = __phys_to_pfn(REALVIEW_SYS_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE),
.pfn = __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE),
.pfn = __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
.pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE),
.pfn = __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE),
.pfn = __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
#ifdef CONFIG_DEBUG_LL
{
.virtual = IO_ADDRESS(REALVIEW_EB_UART0_BASE),
.pfn = __phys_to_pfn(REALVIEW_EB_UART0_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}
#endif
};
static struct map_desc realview_eb11mp_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE),
.pfn = __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE),
.length = REALVIEW_EB11MP_PRIV_MEM_SIZE,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_EB11MP_L220_BASE),
.pfn = __phys_to_pfn(REALVIEW_EB11MP_L220_BASE),
.length = SZ_8K,
.type = MT_DEVICE,
}
};
static void __init realview_eb_map_io(void)
{
iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
if (core_tile_eb11mp() || core_tile_a9mp())
iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
}
static struct pl061_platform_data gpio0_plat_data = {
.gpio_base = 0,
};
static struct pl061_platform_data gpio1_plat_data = {
.gpio_base = 8,
};
static struct pl061_platform_data gpio2_plat_data = {
.gpio_base = 16,
};
static struct pl022_ssp_controller ssp0_plat_data = {
.bus_id = 0,
.enable_dma = 0,
.num_chipselect = 1,
};
/*
* RealView EB AMBA devices
*/
/*
* These devices are connected via the core APB bridge
*/
#define GPIO2_IRQ { IRQ_EB_GPIO2 }
#define GPIO3_IRQ { IRQ_EB_GPIO3 }
#define AACI_IRQ { IRQ_EB_AACI }
#define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
#define KMI0_IRQ { IRQ_EB_KMI0 }
#define KMI1_IRQ { IRQ_EB_KMI1 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
#define EB_SMC_IRQ { }
#define MPMC_IRQ { }
#define EB_CLCD_IRQ { IRQ_EB_CLCD }
#define DMAC_IRQ { IRQ_EB_DMA }
/*
* These devices are connected via the core APB bridge
*/
#define SCTL_IRQ { }
#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG }
#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 }
#define GPIO1_IRQ { IRQ_EB_GPIO1 }
#define EB_RTC_IRQ { IRQ_EB_RTC }
/*
* These devices are connected via the DMA APB bridge
*/
#define SCI_IRQ { IRQ_EB_SCI }
#define EB_UART0_IRQ { IRQ_EB_UART0 }
#define EB_UART1_IRQ { IRQ_EB_UART1 }
#define EB_UART2_IRQ { IRQ_EB_UART2 }
#define EB_UART3_IRQ { IRQ_EB_UART3 }
#define EB_SSP_IRQ { IRQ_EB_SSP }
/* FPGA Primecells */
APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
/* DevChip Primecells */
AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL);
AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL);
AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
&uart0_device,
&uart1_device,
&uart2_device,
&uart3_device,
&smc_device,
&clcd_device,
&sctl_device,
&wdog_device,
&gpio0_device,
&gpio1_device,
&gpio2_device,
&rtc_device,
&sci0_device,
&ssp0_device,
&aaci_device,
&mmc0_device,
&kmi0_device,
&kmi1_device,
};
/*
* RealView EB platform devices
*/
static struct resource realview_eb_flash_resource = {
.start = REALVIEW_EB_FLASH_BASE,
.end = REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
static struct resource realview_eb_eth_resources[] = {
[0] = {
.start = REALVIEW_EB_ETH_BASE,
.end = REALVIEW_EB_ETH_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_EB_ETH,
.end = IRQ_EB_ETH,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
/*
* Detect and register the correct Ethernet device. RealView/EB rev D
* platforms use the newer SMSC LAN9118 Ethernet chip
*/
static int eth_device_register(void)
{
void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
const char *name = NULL;
u32 idrev;
if (!eth_addr)
return -ENOMEM;
idrev = readl(eth_addr + 0x50);
if ((idrev & 0xFFFF0000) != 0x01180000)
/* SMSC LAN9118 not present, use LAN91C111 instead */
name = "smc91x";
iounmap(eth_addr);
return realview_eth_register(name, realview_eb_eth_resources);
}
static struct resource realview_eb_isp1761_resources[] = {
[0] = {
.start = REALVIEW_EB_USB_BASE,
.end = REALVIEW_EB_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_EB_USB,
.end = IRQ_EB_USB,
.flags = IORESOURCE_IRQ,
},
};
static struct resource pmu_resources[] = {
[0] = {
.start = IRQ_EB11MP_PMU_CPU0,
.end = IRQ_EB11MP_PMU_CPU0,
.flags = IORESOURCE_IRQ,
},
[1] = {
.start = IRQ_EB11MP_PMU_CPU1,
.end = IRQ_EB11MP_PMU_CPU1,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_EB11MP_PMU_CPU2,
.end = IRQ_EB11MP_PMU_CPU2,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_EB11MP_PMU_CPU3,
.end = IRQ_EB11MP_PMU_CPU3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device pmu_device = {
.id = -1,
.num_resources = ARRAY_SIZE(pmu_resources),
.resource = pmu_resources,
};
static struct resource char_lcd_resources[] = {
{
.start = REALVIEW_CHAR_LCD_BASE,
.end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_EB_CHARLCD,
.end = IRQ_EB_CHARLCD,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device char_lcd_device = {
.name = "arm-charlcd",
.id = -1,
.num_resources = ARRAY_SIZE(char_lcd_resources),
.resource = char_lcd_resources,
};
static void __init gic_init_irq(void)
{
if (core_tile_eb11mp() || core_tile_a9mp()) {
unsigned int pldctrl;
/* new irq mode */
writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1);
pldctrl |= 0x00800000;
writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1);
writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
/* core tile GIC, primary */
gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE),
__io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
/* board GIC, secondary */
gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE),
__io_address(REALVIEW_EB_GIC_CPU_BASE));
gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
#endif
} else {
/* board GIC, primary */
gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE),
__io_address(REALVIEW_EB_GIC_CPU_BASE));
}
}
/*
* Fix up the IRQ numbers for the RealView EB/ARM11MPCore tile
*/
static void realview_eb11mp_fixup(void)
{
/* AMBA devices */
dmac_device.irq[0] = IRQ_EB11MP_DMA;
uart0_device.irq[0] = IRQ_EB11MP_UART0;
uart1_device.irq[0] = IRQ_EB11MP_UART1;
uart2_device.irq[0] = IRQ_EB11MP_UART2;
uart3_device.irq[0] = IRQ_EB11MP_UART3;
clcd_device.irq[0] = IRQ_EB11MP_CLCD;
wdog_device.irq[0] = IRQ_EB11MP_WDOG;
gpio0_device.irq[0] = IRQ_EB11MP_GPIO0;
gpio1_device.irq[0] = IRQ_EB11MP_GPIO1;
gpio2_device.irq[0] = IRQ_EB11MP_GPIO2;
rtc_device.irq[0] = IRQ_EB11MP_RTC;
sci0_device.irq[0] = IRQ_EB11MP_SCI;
ssp0_device.irq[0] = IRQ_EB11MP_SSP;
aaci_device.irq[0] = IRQ_EB11MP_AACI;
mmc0_device.irq[0] = IRQ_EB11MP_MMCI0A;
mmc0_device.irq[1] = IRQ_EB11MP_MMCI0B;
kmi0_device.irq[0] = IRQ_EB11MP_KMI0;
kmi1_device.irq[0] = IRQ_EB11MP_KMI1;
/* platform devices */
realview_eb_eth_resources[1].start = IRQ_EB11MP_ETH;
realview_eb_eth_resources[1].end = IRQ_EB11MP_ETH;
realview_eb_isp1761_resources[1].start = IRQ_EB11MP_USB;
realview_eb_isp1761_resources[1].end = IRQ_EB11MP_USB;
}
#ifdef CONFIG_HAVE_ARM_TWD
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
REALVIEW_EB11MP_TWD_BASE,
IRQ_LOCALTIMER);
static void __init realview_eb_twd_init(void)
{
if (core_tile_eb11mp() || core_tile_a9mp()) {
int err = twd_local_timer_register(&twd_local_timer);
if (err)
pr_err("twd_local_timer_register failed %d\n", err);
}
}
#else
#define realview_eb_twd_init() do { } while(0)
#endif
static void __init realview_eb_timer_init(void)
{
unsigned int timer_irq;
timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE);
timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20;
timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
if (core_tile_eb11mp() || core_tile_a9mp())
timer_irq = IRQ_EB11MP_TIMER0_1;
else
timer_irq = IRQ_EB_TIMER0_1;
realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(timer_irq);
realview_eb_twd_init();
}
static void realview_eb_restart(enum reboot_mode mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
/*
* To reset, we hit the on-board reset register
* in the system FPGA
*/
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
if (core_tile_eb11mp())
__raw_writel(0x0008, reset_ctrl);
dsb();
}
static void __init realview_eb_init(void)
{
int i;
if (core_tile_eb11mp() || core_tile_a9mp()) {
realview_eb11mp_fixup();
#ifdef CONFIG_CACHE_L2X0
/*
* The PL220 needs to be manually configured as the hardware
* doesn't report the correct sizes.
* 1MB (128KB/way), 8-way associativity, event monitor and
* parity enabled, ignore share bit, no force write allocate
* Bits: .... ...0 0111 1001 0000 .... .... ....
*/
l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
/*
* due to a bug in the l220 cache controller, we must not call
* the sync function. stub it out here instead!
*/
outer_cache.sync = NULL;
#endif
pmu_device.name = core_tile_a9mp() ? "armv7-pmu" : "armv6-pmu";
platform_device_register(&pmu_device);
}
realview_flash_register(&realview_eb_flash_resource, 1);
platform_device_register(&realview_i2c_device);
platform_device_register(&char_lcd_device);
platform_device_register(&realview_leds_device);
eth_device_register();
realview_usb_register(realview_eb_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
}
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.smp = smp_ops(realview_smp_ops),
.fixup = realview_fixup,
.map_io = realview_eb_map_io,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.init_time = realview_eb_timer_init,
.init_machine = realview_eb_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
.restart = realview_eb_restart,
MACHINE_END

View File

@ -1,395 +0,0 @@
/*
* linux/arch/arm/mach-realview/realview_pb1176.c
*
* Copyright (C) 2008 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <linux/reboot.h>
#include <linux/memblock.h>
#include "hardware.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "board-pb1176.h"
#include "irqs-pb1176.h"
#include "core.h"
static struct map_desc realview_pb1176_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(REALVIEW_SYS_BASE),
.pfn = __phys_to_pfn(REALVIEW_SYS_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PB1176_GIC_CPU_BASE),
.pfn = __phys_to_pfn(REALVIEW_PB1176_GIC_CPU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PB1176_GIC_DIST_BASE),
.pfn = __phys_to_pfn(REALVIEW_PB1176_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_DC1176_GIC_CPU_BASE),
.pfn = __phys_to_pfn(REALVIEW_DC1176_GIC_CPU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_DC1176_GIC_DIST_BASE),
.pfn = __phys_to_pfn(REALVIEW_DC1176_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
.pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PB1176_TIMER0_1_BASE),
.pfn = __phys_to_pfn(REALVIEW_PB1176_TIMER0_1_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PB1176_TIMER2_3_BASE),
.pfn = __phys_to_pfn(REALVIEW_PB1176_TIMER2_3_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PB1176_L220_BASE),
.pfn = __phys_to_pfn(REALVIEW_PB1176_L220_BASE),
.length = SZ_8K,
.type = MT_DEVICE,
},
#ifdef CONFIG_DEBUG_LL
{
.virtual = IO_ADDRESS(REALVIEW_PB1176_UART0_BASE),
.pfn = __phys_to_pfn(REALVIEW_PB1176_UART0_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
#endif
};
static void __init realview_pb1176_map_io(void)
{
iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
}
static struct pl061_platform_data gpio0_plat_data = {
.gpio_base = 0,
};
static struct pl061_platform_data gpio1_plat_data = {
.gpio_base = 8,
};
static struct pl061_platform_data gpio2_plat_data = {
.gpio_base = 16,
};
static struct pl022_ssp_controller ssp0_plat_data = {
.bus_id = 0,
.enable_dma = 0,
.num_chipselect = 1,
};
/*
* RealView PB1176 AMBA devices
*/
#define GPIO2_IRQ { IRQ_PB1176_GPIO2 }
#define GPIO3_IRQ { IRQ_PB1176_GPIO3 }
#define AACI_IRQ { IRQ_PB1176_AACI }
#define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
#define KMI0_IRQ { IRQ_PB1176_KMI0 }
#define KMI1_IRQ { IRQ_PB1176_KMI1 }
#define PB1176_SMC_IRQ { }
#define MPMC_IRQ { }
#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD }
#define SCTL_IRQ { }
#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG }
#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 }
#define GPIO1_IRQ { IRQ_PB1176_GPIO1 }
#define PB1176_RTC_IRQ { IRQ_DC1176_RTC }
#define SCI_IRQ { IRQ_PB1176_SCI }
#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 }
#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 }
#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 }
#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 }
#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 }
#define PB1176_SSP_IRQ { IRQ_DC1176_SSP }
/* FPGA Primecells */
APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
/* DevChip Primecells */
AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
&uart1_device,
&uart2_device,
&uart3_device,
&uart4_device,
&smc_device,
&clcd_device,
&sctl_device,
&wdog_device,
&gpio0_device,
&gpio1_device,
&gpio2_device,
&rtc_device,
&sci0_device,
&ssp0_device,
&aaci_device,
&mmc0_device,
&kmi0_device,
&kmi1_device,
};
/*
* RealView PB1176 platform devices
*/
static struct resource realview_pb1176_flash_resources[] = {
{
.start = REALVIEW_PB1176_FLASH_BASE,
.end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
{
.start = REALVIEW_PB1176_SEC_FLASH_BASE,
.end = REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
#endif
};
static struct physmap_flash_data pb1176_rom_pdata = {
.probe_type = "map_rom",
.width = 4,
.nr_parts = 0,
};
static struct resource pb1176_rom_resources[] = {
/*
* This exposes the PB1176 DevChip ROM as an MTD ROM mapping.
* The reference manual states that this is actually a pseudo-ROM
* programmed in NVRAM.
*/
{
.start = REALVIEW_DC1176_ROM_BASE,
.end = REALVIEW_DC1176_ROM_BASE + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device pb1176_rom_device = {
.name = "physmap-flash",
.id = -1,
.num_resources = ARRAY_SIZE(pb1176_rom_resources),
.resource = pb1176_rom_resources,
.dev = {
.platform_data = &pb1176_rom_pdata,
},
};
static struct resource realview_pb1176_smsc911x_resources[] = {
[0] = {
.start = REALVIEW_PB1176_ETH_BASE,
.end = REALVIEW_PB1176_ETH_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PB1176_ETH,
.end = IRQ_PB1176_ETH,
.flags = IORESOURCE_IRQ,
},
};
static struct resource realview_pb1176_isp1761_resources[] = {
[0] = {
.start = REALVIEW_PB1176_USB_BASE,
.end = REALVIEW_PB1176_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PB1176_USB,
.end = IRQ_PB1176_USB,
.flags = IORESOURCE_IRQ,
},
};
static struct resource pmu_resource = {
.start = IRQ_DC1176_CORE_PMU,
.end = IRQ_DC1176_CORE_PMU,
.flags = IORESOURCE_IRQ,
};
static struct platform_device pmu_device = {
.name = "armv6-pmu",
.id = -1,
.num_resources = 1,
.resource = &pmu_resource,
};
static struct resource char_lcd_resources[] = {
{
.start = REALVIEW_CHAR_LCD_BASE,
.end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PB1176_CHARLCD,
.end = IRQ_PB1176_CHARLCD,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device char_lcd_device = {
.name = "arm-charlcd",
.id = -1,
.num_resources = ARRAY_SIZE(char_lcd_resources),
.resource = char_lcd_resources,
};
static void __init gic_init_irq(void)
{
/* ARM1176 DevChip GIC, primary */
gic_init(0, IRQ_DC1176_GIC_START,
__io_address(REALVIEW_DC1176_GIC_DIST_BASE),
__io_address(REALVIEW_DC1176_GIC_CPU_BASE));
/* board GIC, secondary */
gic_init(1, IRQ_PB1176_GIC_START,
__io_address(REALVIEW_PB1176_GIC_DIST_BASE),
__io_address(REALVIEW_PB1176_GIC_CPU_BASE));
gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1);
}
static void __init realview_pb1176_timer_init(void)
{
timer0_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE);
timer1_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE) + 0x20;
timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
realview_clk_init(__io_address(REALVIEW_SYS_BASE), true);
realview_timer_init(IRQ_DC1176_TIMER0);
}
static void realview_pb1176_restart(enum reboot_mode mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
dsb();
}
static void realview_pb1176_fixup(struct tag *tags, char **from)
{
/*
* RealView PB1176 only has 128MB of RAM mapped at 0.
*/
memblock_add(0, SZ_128M);
}
static void __init realview_pb1176_init(void)
{
int i;
#ifdef CONFIG_CACHE_L2X0
/*
* The PL220 needs to be manually configured as the hardware
* doesn't report the correct sizes.
* 128kB (16kB/way), 8-way associativity, event monitor and
* parity enabled, ignore share bit, no force write allocate
* Bits: .... ...0 0111 0011 0000 .... .... ....
*/
l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
#endif
realview_flash_register(realview_pb1176_flash_resources,
ARRAY_SIZE(realview_pb1176_flash_resources));
platform_device_register(&pb1176_rom_device);
realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
platform_device_register(&realview_i2c_device);
realview_usb_register(realview_pb1176_isp1761_resources);
platform_device_register(&pmu_device);
platform_device_register(&char_lcd_device);
platform_device_register(&realview_leds_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
}
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.fixup = realview_pb1176_fixup,
.map_io = realview_pb1176_map_io,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.init_time = realview_pb1176_timer_init,
.init_machine = realview_pb1176_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
.restart = realview_pb1176_restart,
MACHINE_END

View File

@ -1,385 +0,0 @@
/*
* linux/arch/arm/mach-realview/realview_pb11mp.c
*
* Copyright (C) 2008 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <linux/reboot.h>
#include "hardware.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/smp_twd.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/outercache.h>
#include "board-pb11mp.h"
#include "irqs-pb11mp.h"
#include "core.h"
static struct map_desc realview_pb11mp_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(REALVIEW_SYS_BASE),
.pfn = __phys_to_pfn(REALVIEW_SYS_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PB11MP_GIC_CPU_BASE),
.pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_CPU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PB11MP_GIC_DIST_BASE),
.pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, { /* Maps the SCU, GIC CPU interface, TWD, GIC DIST */
.virtual = IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE),
.pfn = __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE),
.length = REALVIEW_TC11MP_PRIV_MEM_SIZE,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
.pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PB11MP_TIMER0_1_BASE),
.pfn = __phys_to_pfn(REALVIEW_PB11MP_TIMER0_1_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PB11MP_TIMER2_3_BASE),
.pfn = __phys_to_pfn(REALVIEW_PB11MP_TIMER2_3_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_TC11MP_L220_BASE),
.pfn = __phys_to_pfn(REALVIEW_TC11MP_L220_BASE),
.length = SZ_8K,
.type = MT_DEVICE,
},
#ifdef CONFIG_DEBUG_LL
{
.virtual = IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE),
.pfn = __phys_to_pfn(REALVIEW_PB11MP_UART0_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
#endif
};
static void __init realview_pb11mp_map_io(void)
{
iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
}
static struct pl061_platform_data gpio0_plat_data = {
.gpio_base = 0,
};
static struct pl061_platform_data gpio1_plat_data = {
.gpio_base = 8,
};
static struct pl061_platform_data gpio2_plat_data = {
.gpio_base = 16,
};
static struct pl022_ssp_controller ssp0_plat_data = {
.bus_id = 0,
.enable_dma = 0,
.num_chipselect = 1,
};
/*
* RealView PB11MPCore AMBA devices
*/
#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 }
#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 }
#define AACI_IRQ { IRQ_TC11MP_AACI }
#define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
#define KMI0_IRQ { IRQ_TC11MP_KMI0 }
#define KMI1_IRQ { IRQ_TC11MP_KMI1 }
#define PB11MP_SMC_IRQ { }
#define MPMC_IRQ { }
#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD }
#define DMAC_IRQ { IRQ_PB11MP_DMAC }
#define SCTL_IRQ { }
#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG }
#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 }
#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 }
#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC }
#define SCI_IRQ { IRQ_PB11MP_SCI }
#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 }
#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 }
#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 }
#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 }
#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP }
/* FPGA Primecells */
APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
/* DevChip Primecells */
AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
&uart0_device,
&uart1_device,
&uart2_device,
&uart3_device,
&smc_device,
&clcd_device,
&sctl_device,
&wdog_device,
&gpio0_device,
&gpio1_device,
&gpio2_device,
&rtc_device,
&sci0_device,
&ssp0_device,
&aaci_device,
&mmc0_device,
&kmi0_device,
&kmi1_device,
};
/*
* RealView PB11MPCore platform devices
*/
static struct resource realview_pb11mp_flash_resource[] = {
[0] = {
.start = REALVIEW_PB11MP_FLASH0_BASE,
.end = REALVIEW_PB11MP_FLASH0_BASE + REALVIEW_PB11MP_FLASH0_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = REALVIEW_PB11MP_FLASH1_BASE,
.end = REALVIEW_PB11MP_FLASH1_BASE + REALVIEW_PB11MP_FLASH1_SIZE - 1,
.flags = IORESOURCE_MEM,
},
};
static struct resource realview_pb11mp_smsc911x_resources[] = {
[0] = {
.start = REALVIEW_PB11MP_ETH_BASE,
.end = REALVIEW_PB11MP_ETH_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_TC11MP_ETH,
.end = IRQ_TC11MP_ETH,
.flags = IORESOURCE_IRQ,
},
};
static struct resource realview_pb11mp_isp1761_resources[] = {
[0] = {
.start = REALVIEW_PB11MP_USB_BASE,
.end = REALVIEW_PB11MP_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_TC11MP_USB,
.end = IRQ_TC11MP_USB,
.flags = IORESOURCE_IRQ,
},
};
static struct resource pmu_resources[] = {
[0] = {
.start = IRQ_TC11MP_PMU_CPU0,
.end = IRQ_TC11MP_PMU_CPU0,
.flags = IORESOURCE_IRQ,
},
[1] = {
.start = IRQ_TC11MP_PMU_CPU1,
.end = IRQ_TC11MP_PMU_CPU1,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_TC11MP_PMU_CPU2,
.end = IRQ_TC11MP_PMU_CPU2,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_TC11MP_PMU_CPU3,
.end = IRQ_TC11MP_PMU_CPU3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device pmu_device = {
.name = "armv6-pmu",
.id = -1,
.num_resources = ARRAY_SIZE(pmu_resources),
.resource = pmu_resources,
};
static void __init gic_init_irq(void)
{
unsigned int pldctrl;
/* new irq mode with no DCC */
writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1);
pldctrl |= 2 << 22;
writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1);
writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
/* ARM11MPCore test chip GIC, primary */
gic_init(0, 29, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE),
__io_address(REALVIEW_TC11MP_GIC_CPU_BASE));
/* board GIC, secondary */
gic_init(1, IRQ_PB11MP_GIC_START,
__io_address(REALVIEW_PB11MP_GIC_DIST_BASE),
__io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
}
#ifdef CONFIG_HAVE_ARM_TWD
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
REALVIEW_TC11MP_TWD_BASE,
IRQ_LOCALTIMER);
static void __init realview_pb11mp_twd_init(void)
{
int err = twd_local_timer_register(&twd_local_timer);
if (err)
pr_err("twd_local_timer_register failed %d\n", err);
}
#else
#define realview_pb11mp_twd_init() do {} while(0)
#endif
static void __init realview_pb11mp_timer_init(void)
{
timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE);
timer1_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE) + 0x20;
timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_TC11MP_TIMER0_1);
realview_pb11mp_twd_init();
}
static void realview_pb11mp_restart(enum reboot_mode mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
/*
* To reset, we hit the on-board reset register
* in the system FPGA
*/
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(0x0000, reset_ctrl);
__raw_writel(0x0004, reset_ctrl);
dsb();
}
static void __init realview_pb11mp_init(void)
{
int i;
#ifdef CONFIG_CACHE_L2X0
/*
* The PL220 needs to be manually configured as the hardware
* doesn't report the correct sizes.
* 1MB (128KB/way), 8-way associativity, event monitor and
* parity enabled, ignore share bit, no force write allocate
* Bits: .... ...0 0111 1001 0000 .... .... ....
*/
l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff);
/*
* due to a bug in the l220 cache controller, we must not call
* the sync function. stub it out here instead!
*/
outer_cache.sync = NULL;
#endif
realview_flash_register(realview_pb11mp_flash_resource,
ARRAY_SIZE(realview_pb11mp_flash_resource));
realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
platform_device_register(&realview_i2c_device);
platform_device_register(&realview_cf_device);
platform_device_register(&realview_leds_device);
realview_usb_register(realview_pb11mp_isp1761_resources);
platform_device_register(&pmu_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
}
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.smp = smp_ops(realview_smp_ops),
.fixup = realview_fixup,
.map_io = realview_pb11mp_map_io,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.init_time = realview_pb11mp_timer_init,
.init_machine = realview_pb11mp_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
.restart = realview_pb11mp_restart,
MACHINE_END

View File

@ -1,307 +0,0 @@
/*
* linux/arch/arm/mach-realview/realview_pba8.c
*
* Copyright (C) 2008 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <linux/reboot.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "hardware.h"
#include "board-pba8.h"
#include "irqs-pba8.h"
#include "core.h"
static struct map_desc realview_pba8_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(REALVIEW_SYS_BASE),
.pfn = __phys_to_pfn(REALVIEW_SYS_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_CPU_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_CPU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_DIST_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
.pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER0_1_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER0_1_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER2_3_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER2_3_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
#ifdef CONFIG_DEBUG_LL
{
.virtual = IO_ADDRESS(REALVIEW_PBA8_UART0_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBA8_UART0_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
#endif
};
static void __init realview_pba8_map_io(void)
{
iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
}
static struct pl061_platform_data gpio0_plat_data = {
.gpio_base = 0,
};
static struct pl061_platform_data gpio1_plat_data = {
.gpio_base = 8,
};
static struct pl061_platform_data gpio2_plat_data = {
.gpio_base = 16,
};
static struct pl022_ssp_controller ssp0_plat_data = {
.bus_id = 0,
.enable_dma = 0,
.num_chipselect = 1,
};
/*
* RealView PBA8Core AMBA devices
*/
#define GPIO2_IRQ { IRQ_PBA8_GPIO2 }
#define GPIO3_IRQ { IRQ_PBA8_GPIO3 }
#define AACI_IRQ { IRQ_PBA8_AACI }
#define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
#define KMI0_IRQ { IRQ_PBA8_KMI0 }
#define KMI1_IRQ { IRQ_PBA8_KMI1 }
#define PBA8_SMC_IRQ { }
#define MPMC_IRQ { }
#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD }
#define DMAC_IRQ { IRQ_PBA8_DMAC }
#define SCTL_IRQ { }
#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG }
#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 }
#define GPIO1_IRQ { IRQ_PBA8_GPIO1 }
#define PBA8_RTC_IRQ { IRQ_PBA8_RTC }
#define SCI_IRQ { IRQ_PBA8_SCI }
#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 }
#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 }
#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 }
#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 }
#define PBA8_SSP_IRQ { IRQ_PBA8_SSP }
/* FPGA Primecells */
APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
/* DevChip Primecells */
AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
&uart0_device,
&uart1_device,
&uart2_device,
&uart3_device,
&smc_device,
&clcd_device,
&sctl_device,
&wdog_device,
&gpio0_device,
&gpio1_device,
&gpio2_device,
&rtc_device,
&sci0_device,
&ssp0_device,
&aaci_device,
&mmc0_device,
&kmi0_device,
&kmi1_device,
};
/*
* RealView PB-A8 platform devices
*/
static struct resource realview_pba8_flash_resource[] = {
[0] = {
.start = REALVIEW_PBA8_FLASH0_BASE,
.end = REALVIEW_PBA8_FLASH0_BASE + REALVIEW_PBA8_FLASH0_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = REALVIEW_PBA8_FLASH1_BASE,
.end = REALVIEW_PBA8_FLASH1_BASE + REALVIEW_PBA8_FLASH1_SIZE - 1,
.flags = IORESOURCE_MEM,
},
};
static struct resource realview_pba8_smsc911x_resources[] = {
[0] = {
.start = REALVIEW_PBA8_ETH_BASE,
.end = REALVIEW_PBA8_ETH_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PBA8_ETH,
.end = IRQ_PBA8_ETH,
.flags = IORESOURCE_IRQ,
},
};
static struct resource realview_pba8_isp1761_resources[] = {
[0] = {
.start = REALVIEW_PBA8_USB_BASE,
.end = REALVIEW_PBA8_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PBA8_USB,
.end = IRQ_PBA8_USB,
.flags = IORESOURCE_IRQ,
},
};
static struct resource pmu_resource = {
.start = IRQ_PBA8_PMU,
.end = IRQ_PBA8_PMU,
.flags = IORESOURCE_IRQ,
};
static struct platform_device pmu_device = {
.name = "armv7-pmu",
.id = -1,
.num_resources = 1,
.resource = &pmu_resource,
};
static void __init gic_init_irq(void)
{
/* ARM PB-A8 on-board GIC */
gic_init(0, IRQ_PBA8_GIC_START,
__io_address(REALVIEW_PBA8_GIC_DIST_BASE),
__io_address(REALVIEW_PBA8_GIC_CPU_BASE));
}
static void __init realview_pba8_timer_init(void)
{
timer0_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE);
timer1_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE) + 0x20;
timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_PBA8_TIMER0_1);
}
static void realview_pba8_restart(enum reboot_mode mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
/*
* To reset, we hit the on-board reset register
* in the system FPGA
*/
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(0x0000, reset_ctrl);
__raw_writel(0x0004, reset_ctrl);
dsb();
}
static void __init realview_pba8_init(void)
{
int i;
realview_flash_register(realview_pba8_flash_resource,
ARRAY_SIZE(realview_pba8_flash_resource));
realview_eth_register(NULL, realview_pba8_smsc911x_resources);
platform_device_register(&realview_i2c_device);
platform_device_register(&realview_cf_device);
platform_device_register(&realview_leds_device);
realview_usb_register(realview_pba8_isp1761_resources);
platform_device_register(&pmu_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
}
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_pba8_map_io,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.init_time = realview_pba8_timer_init,
.init_machine = realview_pba8_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
.restart = realview_pba8_restart,
MACHINE_END

View File

@ -1,402 +0,0 @@
/*
* arch/arm/mach-realview/realview_pbx.c
*
* Copyright (C) 2009 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <linux/reboot.h>
#include <linux/memblock.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/smp_twd.h>
#include <asm/pgtable.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "hardware.h"
#include "board-pbx.h"
#include "irqs-pbx.h"
#include "core.h"
static struct map_desc realview_pbx_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(REALVIEW_SYS_BASE),
.pfn = __phys_to_pfn(REALVIEW_SYS_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
.pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
#ifdef CONFIG_DEBUG_LL
{
.virtual = IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
#endif
};
static struct map_desc realview_local_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
.length = SZ_8K,
.type = MT_DEVICE,
}
};
static void __init realview_pbx_map_io(void)
{
iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
if (core_tile_pbx11mp() || core_tile_pbxa9mp())
iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
}
static struct pl061_platform_data gpio0_plat_data = {
.gpio_base = 0,
};
static struct pl061_platform_data gpio1_plat_data = {
.gpio_base = 8,
};
static struct pl061_platform_data gpio2_plat_data = {
.gpio_base = 16,
};
static struct pl022_ssp_controller ssp0_plat_data = {
.bus_id = 0,
.enable_dma = 0,
.num_chipselect = 1,
};
/*
* RealView PBXCore AMBA devices
*/
#define GPIO2_IRQ { IRQ_PBX_GPIO2 }
#define GPIO3_IRQ { IRQ_PBX_GPIO3 }
#define AACI_IRQ { IRQ_PBX_AACI }
#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
#define KMI0_IRQ { IRQ_PBX_KMI0 }
#define KMI1_IRQ { IRQ_PBX_KMI1 }
#define PBX_SMC_IRQ { }
#define MPMC_IRQ { }
#define PBX_CLCD_IRQ { IRQ_PBX_CLCD }
#define DMAC_IRQ { IRQ_PBX_DMAC }
#define SCTL_IRQ { }
#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG }
#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 }
#define GPIO1_IRQ { IRQ_PBX_GPIO1 }
#define PBX_RTC_IRQ { IRQ_PBX_RTC }
#define SCI_IRQ { IRQ_PBX_SCI }
#define PBX_UART0_IRQ { IRQ_PBX_UART0 }
#define PBX_UART1_IRQ { IRQ_PBX_UART1 }
#define PBX_UART2_IRQ { IRQ_PBX_UART2 }
#define PBX_UART3_IRQ { IRQ_PBX_UART3 }
#define PBX_SSP_IRQ { IRQ_PBX_SSP }
/* FPGA Primecells */
APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
/* DevChip Primecells */
AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
&uart0_device,
&uart1_device,
&uart2_device,
&uart3_device,
&smc_device,
&clcd_device,
&sctl_device,
&wdog_device,
&gpio0_device,
&gpio1_device,
&gpio2_device,
&rtc_device,
&sci0_device,
&ssp0_device,
&aaci_device,
&mmc0_device,
&kmi0_device,
&kmi1_device,
};
/*
* RealView PB-X platform devices
*/
static struct resource realview_pbx_flash_resources[] = {
[0] = {
.start = REALVIEW_PBX_FLASH0_BASE,
.end = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = REALVIEW_PBX_FLASH1_BASE,
.end = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
.flags = IORESOURCE_MEM,
},
};
static struct resource realview_pbx_smsc911x_resources[] = {
[0] = {
.start = REALVIEW_PBX_ETH_BASE,
.end = REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PBX_ETH,
.end = IRQ_PBX_ETH,
.flags = IORESOURCE_IRQ,
},
};
static struct resource realview_pbx_isp1761_resources[] = {
[0] = {
.start = REALVIEW_PBX_USB_BASE,
.end = REALVIEW_PBX_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PBX_USB,
.end = IRQ_PBX_USB,
.flags = IORESOURCE_IRQ,
},
};
#ifdef CONFIG_CACHE_L2X0
static struct resource pmu_resources[] = {
[0] = {
.start = IRQ_PBX_PMU_CPU0,
.end = IRQ_PBX_PMU_CPU0,
.flags = IORESOURCE_IRQ,
},
[1] = {
.start = IRQ_PBX_PMU_CPU1,
.end = IRQ_PBX_PMU_CPU1,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_PBX_PMU_CPU2,
.end = IRQ_PBX_PMU_CPU2,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_PBX_PMU_CPU3,
.end = IRQ_PBX_PMU_CPU3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device pmu_device = {
.name = "armv7-pmu",
.id = -1,
.num_resources = ARRAY_SIZE(pmu_resources),
.resource = pmu_resources,
};
#endif
static void __init gic_init_irq(void)
{
/* ARM PBX on-board GIC */
if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
gic_init(0, 29, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
__io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
} else {
gic_init(0, IRQ_PBX_GIC_START,
__io_address(REALVIEW_PBX_GIC_DIST_BASE),
__io_address(REALVIEW_PBX_GIC_CPU_BASE));
}
}
#ifdef CONFIG_HAVE_ARM_TWD
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
REALVIEW_PBX_TILE_TWD_BASE,
IRQ_LOCALTIMER);
static void __init realview_pbx_twd_init(void)
{
int err = twd_local_timer_register(&twd_local_timer);
if (err)
pr_err("twd_local_timer_register failed %d\n", err);
}
#else
#define realview_pbx_twd_init() do { } while(0)
#endif
static void __init realview_pbx_timer_init(void)
{
timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_PBX_TIMER0_1);
realview_pbx_twd_init();
}
static void realview_pbx_fixup(struct tag *tags, char **from)
{
#ifdef CONFIG_SPARSEMEM
/*
* Memory configuration with SPARSEMEM enabled on RealView PBX (see
* asm/mach/memory.h for more information).
*/
memblock_add(0, SZ_256M);
memblock_add(0x20000000, SZ_512M);
memblock_add(0x80000000, SZ_256M);
#else
realview_fixup(tags, from);
#endif
}
static void realview_pbx_restart(enum reboot_mode mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
/*
* To reset, we hit the on-board reset register
* in the system FPGA
*/
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(0x00F0, reset_ctrl);
__raw_writel(0x00F4, reset_ctrl);
dsb();
}
static void __init realview_pbx_init(void)
{
int i;
#ifdef CONFIG_CACHE_L2X0
if (core_tile_pbxa9mp()) {
void __iomem *l2x0_base =
__io_address(REALVIEW_PBX_TILE_L220_BASE);
/* set RAM latencies to 1 cycle for eASIC */
writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
/* 16KB way size, 8-way associativity, parity disabled
* Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
platform_device_register(&pmu_device);
}
#endif
realview_flash_register(realview_pbx_flash_resources,
ARRAY_SIZE(realview_pbx_flash_resources));
realview_eth_register(NULL, realview_pbx_smsc911x_resources);
platform_device_register(&realview_i2c_device);
platform_device_register(&realview_cf_device);
platform_device_register(&realview_leds_device);
realview_usb_register(realview_pbx_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
}
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.smp = smp_ops(realview_smp_ops),
.fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.init_time = realview_pbx_timer_init,
.init_machine = realview_pbx_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
.restart = realview_pbx_restart,
MACHINE_END

View File

@ -25,7 +25,7 @@ obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi-nmi.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o
obj-$(CONFIG_ARM_GIC_PM) += irq-gic-pm.o
obj-$(CONFIG_REALVIEW_DT) += irq-gic-realview.o
obj-$(CONFIG_ARCH_REALVIEW) += irq-gic-realview.o
obj-$(CONFIG_ARM_GIC_V2M) += irq-gic-v2m.o
obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-common.o
obj-$(CONFIG_ARM_GIC_V3_ITS) += irq-gic-v3-its.o irq-gic-v3-its-pci-msi.o irq-gic-v3-its-platform-msi.o

View File

@ -78,7 +78,7 @@ config MTD_PHYSMAP_OF_VERSATILE
bool "Support ARM Versatile physmap OF"
depends on MTD_PHYSMAP_OF
depends on MFD_SYSCON
default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || REALVIEW_DT)
default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || ARCH_REALVIEW)
help
This provides some extra DT physmap parsing for the ARM Versatile
platforms, basically to add a VPP (write protection) callback so