diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index b4ee11198762..bdb22006f713 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1122,6 +1122,11 @@ the driver will use only 32-bit accessors to read/write the device registers. + liteuart, + Start an early console on a litex serial port at the + specified address. The serial port must already be + setup and configured. Options are not yet supported. + meson, Start an early, polled-mode console on a meson serial port at the specified address. The serial port must diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index 41f57c448621..a0bf061b80fe 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -10,7 +10,7 @@ maintainers: - devicetree@vger.kernel.org allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# - if: anyOf: - required: diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml new file mode 100644 index 000000000000..1c826fcf5828 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/8250_omap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs + +maintainers: + - Vignesh Raghavendra + +allOf: + - $ref: /schemas/serial/serial.yaml# + - $ref: /schemas/serial/rs485.yaml# + +properties: + compatible: + oneOf: + - enum: + - ti,am3352-uart + - ti,am4372-uart + - ti,am654-uart + - ti,dra742-uart + - ti,omap2-uart + - ti,omap3-uart + - ti,omap4-uart + - items: + - enum: + - ti,am64-uart + - ti,j721e-uart + - const: ti,am654-uart + + ti,hwmods: + description: + Must be "uart", n being the instance number (1-based) + This property is applicable only on legacy platforms mainly omap2/3 + and ti81xx and should not be used on other platforms. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + description: + First entry is module IRQ required for normal IO operation. + Second entry is optional and corresponds to system wakeup IRQ + where supported. + + clocks: + maxItems: 1 + + clock-names: + const: fclk + + rts-gpios: true + cts-gpios: true + dtr-gpios: true + dsr-gpios: true + rng-gpios: true + dcd-gpios: true + rs485-rts-delay: true + rs485-rts-active-low: true + rs485-rx-during-tx: true + rs485-rts-active-high: true + linux,rs485-enabled-at-boot-time: true + rts-gpio: true + power-domains: true + clock-frequency: true + current-speed: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +if: + properties: + compatible: + oneOf: + - const: ti,omap2-uart + - const: ti,omap3-uart + - const: ti,omap4-uart + +then: + properties: + ti,hwmods: + items: + - pattern: "^uart([1-9])$" + +else: + properties: + ti,hwmods: false + +examples: + - | + serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + dmas = <&sdma 81 &sdma 82>; + dma-names = "tx", "rx"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml index 75ebc9952a99..7487aa6ef849 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml @@ -55,6 +55,11 @@ properties: - const: pclk - const: baud + fifo-size: + description: The fifo size supported by the UART channel. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [64, 128] + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml index 46c62745f901..6d176588df47 100644 --- a/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml +++ b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml @@ -10,7 +10,7 @@ maintainers: - Al Cooper allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# description: |+ The Broadcom UART is based on the basic 8250 UART but with diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml index 2b06c6ce4a75..9d949296a142 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml @@ -71,6 +71,18 @@ properties: received, and that the peripheral should invert its input using the INVR registers. + fsl,dma-info: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + description: | + First cell contains the size of DMA buffer chunks, second cell contains + the amount of chunks used for the device. Multiplying both numbers is + the total size of memory used for receiving data. + When not being configured the system will use default settings, which + are sensible for most use cases. If you need low latency processing on + slow connections this needs to be configured appropriately. + uart-has-rtscts: true rs485-rts-delay: true diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml index 7748d8c3bab8..b432d4dff730 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml @@ -10,7 +10,7 @@ maintainers: - Paul Cercueil allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index b7e0e32b9ac6..2d0dbdf32d1d 100644 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt @@ -5,10 +5,10 @@ Required properties: - compatible: - "marvell,armada-3700-uart" for the standard variant of the UART (32 bytes FIFO, no DMA, level interrupts, 8-bit access to the - FIFO, baudrate limited to 230400). + FIFO), called also UART1. - "marvell,armada-3700-uart-ext" for the extended variant of the UART (128 bytes FIFO, DMA, front interrupts, 8-bit or 32-bit - accesses to the FIFO, baudrate unlimited by the dividers). + accesses to the FIFO), called also UART2. - reg: offset and length of the register set for the device. - clocks: UART reference clock used to derive the baudrate. If no clock is provided (possible only with the "marvell,armada-3700-uart" @@ -33,7 +33,7 @@ Required properties: Example: uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x200>; + reg = <0x12000 0x18>; clocks = <&xtalclk>; interrupts = , diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt deleted file mode 100644 index c2db8cabf2ab..000000000000 --- a/Documentation/devicetree/bindings/serial/omap_serial.txt +++ /dev/null @@ -1,40 +0,0 @@ -OMAP UART controller - -Required properties: -- compatible : should be "ti,am64-uart", "ti,am654-uart" for AM64 controllers -- compatible : should be "ti,j721e-uart", "ti,am654-uart" for J721E controllers -- compatible : should be "ti,am654-uart" for AM654 controllers -- compatible : should be "ti,omap2-uart" for OMAP2 controllers -- compatible : should be "ti,omap3-uart" for OMAP3 controllers -- compatible : should be "ti,omap4-uart" for OMAP4 controllers -- compatible : should be "ti,am4372-uart" for AM437x controllers -- compatible : should be "ti,am3352-uart" for AM335x controllers -- compatible : should be "ti,dra742-uart" for DRA7x controllers -- reg : address and length of the register space -- interrupts or interrupts-extended : Should contain the uart interrupt - specifier or both the interrupt - controller phandle and interrupt - specifier. -- ti,hwmods : Must be "uart", n being the instance number (1-based) - -Optional properties: -- clock-frequency : frequency of the clock input to the UART -- dmas : DMA specifier, consisting of a phandle to the DMA controller - node and a DMA channel number. -- dma-names : "rx" for receive channel, "tx" for transmit channel. -- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt -- rs485-rts-active-high: drive RTS high when sending (default is low). -- clocks: phandle to the functional clock as per - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Example: - - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - reg = <0x49042000 0x400>; - interrupts = <80>; - dmas = <&sdma 81 &sdma 82>; - dma-names = "tx", "rx"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index 1f8e9f2644b6..5ea00f8a283d 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -10,7 +10,7 @@ maintainers: - Rob Herring allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# # Need a custom select here or 'arm,primecell' will match on lots of nodes select: @@ -24,12 +24,9 @@ select: properties: compatible: - oneOf: - - items: - - const: arm,pl011 - - const: arm,primecell - - items: - - const: arm,primecell + items: + - const: arm,pl011 + - const: arm,primecell reg: maxItems: 1 @@ -103,7 +100,7 @@ dependencies: poll-rate-ms: [ auto-poll ] poll-timeout-ms: [ auto-poll ] -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml index a344369285b6..a644e5af12b2 100644 --- a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml +++ b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml @@ -10,7 +10,7 @@ maintainers: - Oleksij Rempel allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# properties: compatible: @@ -35,7 +35,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml index 82aefdb0d45e..e98ec48fee46 100644 --- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml @@ -35,7 +35,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 22d76829f7ae..6b8731f7f2fb 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -64,6 +64,10 @@ properties: - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2 - const: renesas,scif # generic SCIF compatible UART + - items: + - enum: + - renesas,scif-r9a07g044 # RZ/G2{L,LC} + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 3ec3822bd114..f064e5b76cf1 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -81,7 +81,7 @@ required: unevaluatedProperties: false allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# - if: properties: diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 2fdf4ed198da..c75ba3fb6465 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -23,6 +23,8 @@ properties: $nodename: pattern: "^serial(@.*)?$" + label: true + cts-gpios: maxItems: 1 description: diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml index 5fa94dacbba9..09aae43f65a7 100644 --- a/Documentation/devicetree/bindings/serial/sifive-serial.yaml +++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml @@ -12,7 +12,7 @@ maintainers: - Palmer Dabbelt allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# properties: compatible: @@ -49,7 +49,7 @@ required: - interrupts - clocks -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 87ef1e218152..b49fda5e608f 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -10,7 +10,7 @@ maintainers: - Rob Herring allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# properties: compatible: @@ -23,6 +23,7 @@ properties: - items: - enum: - rockchip,px30-uart + - rockchip,rk1808-uart - rockchip,rk3036-uart - rockchip,rk3066-uart - rockchip,rk3188-uart @@ -31,6 +32,7 @@ properties: - rockchip,rk3328-uart - rockchip,rk3368-uart - rockchip,rk3399-uart + - rockchip,rk3568-uart - rockchip,rv1108-uart - const: snps,dw-apb-uart - items: diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 71a6426bc558..f50f4ca893a0 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -112,8 +112,7 @@ required: - interrupts - clocks -additionalProperties: - type: object +unevaluatedProperties: false examples: - | diff --git a/Documentation/driver-api/serial/moxa-smartio.rst b/Documentation/driver-api/serial/moxa-smartio.rst index 156100f17c3f..af25bc5cc3e6 100644 --- a/Documentation/driver-api/serial/moxa-smartio.rst +++ b/Documentation/driver-api/serial/moxa-smartio.rst @@ -2,14 +2,8 @@ MOXA Smartio/Industio Family Device Driver Installation Guide ============================================================= -.. note:: - - This file is outdated. It needs some care in order to make it - updated to Kernel 5.0 and upper - Copyright (C) 2008, Moxa Inc. - -Date: 01/21/2008 +Copyright (C) 2021, Jiri Slaby .. Content @@ -17,12 +11,7 @@ Date: 01/21/2008 2. System Requirement 3. Installation 3.1 Hardware installation - 3.2 Driver files - 3.3 Device naming convention - 3.4 Module driver configuration - 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x. - 3.6 Custom configuration - 3.7 Verify driver installation + 3.2 Device naming convention 4. Utilities 5. Setserial 6. Troubleshooting @@ -31,14 +20,13 @@ Date: 01/21/2008 ^^^^^^^^^^^^^^^ The Smartio/Industio/UPCI family Linux driver supports following multiport - boards. + boards: - 2 ports multiport board CP-102U, CP-102UL, CP-102UF CP-132U-I, CP-132UL, CP-132, CP-132I, CP132S, CP-132IS, - CI-132, CI-132I, CI-132IS, - (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S) + (CP-102, CP-102S) - 4 ports multiport board CP-104EL, @@ -46,10 +34,7 @@ Date: 01/21/2008 CP-134U, CP-134U-I, C104H/PCI, C104HS/PCI, CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL, - C104H, C104HS, - CI-104J, CI-104JS, - CI-134, CI-134I, CI-134IS, - (C114HI, CT-114I, C104P), + (C114HI, CT-114I), POS-104UL, CB-114, CB-134I @@ -58,15 +43,10 @@ Date: 01/21/2008 CP-118EL, CP-168EL, CP-118U, CP-168U, C168H/PCI, - C168H, C168HS, - (C168P), CB-108 - This driver and installation procedure have been developed upon Linux Kernel - 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order - to maintain compatibility, this version has also been properly tested with - RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem - occurs, please contact Moxa at support@moxa.com.tw. + If a compatibility problem occurs, please contact Moxa at + support@moxa.com.tw. In addition to device driver, useful utilities are also provided in this version. They are: @@ -78,22 +58,19 @@ Date: 01/21/2008 Monitor program to observe data count and line status signals. - msterm A simple terminal program which is useful in testing serial ports. - - io-irq.exe - Configuration program to setup ISA boards. Please note that - this program can only be executed under DOS. All the drivers and utilities are published in form of source code under GNU General Public License in this version. Please refer to GNU General Public License announcement in each source code file for more detail. - In Moxa's Web sites, you may always find latest driver at http://www.moxa.com/. + In Moxa's Web sites, you may always find the latest driver at + https://www.moxa.com/. - This version of driver can be installed as Loadable Module (Module driver) - or built-in into kernel (Static driver). You may refer to following - installation procedure for suitable one. Before you install the driver, + This version of driver can be installed as a Loadable Module (Module driver) + or built-in into kernel (Static driver). Before you install the driver, please refer to hardware installation procedure in the User's Manual. - We assume the user should be familiar with following documents. + We assume the user should be familiar with following documents: - Serial-HOWTO - Kernel-HOWTO @@ -101,9 +78,6 @@ Date: 01/21/2008 2. System Requirement ^^^^^^^^^^^^^^^^^^^^^ - - Hardware platform: Intel x86 machine - - Kernel version: 2.4.x or 2.6.x - - gcc version 2.72 or later - Maximum 4 boards can be installed in combination 3. Installation @@ -112,23 +86,12 @@ Date: 01/21/2008 3.1 Hardware installation ========================= - There are two types of buses, ISA and PCI, for Smartio/Industio - family multiport board. - -ISA board ---------- - - You'll have to configure CAP address, I/O address, Interrupt Vector - as well as IRQ before installing this driver. Please refer to hardware - installation procedure in User's Manual before proceed any further. - Please make sure the JP1 is open after the ISA board is set properly. - PCI/UPCI board -------------- - You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict - with other ISA devices. Please refer to hardware installation - procedure in User's Manual in advance. + You may need to adjust IRQ usage in BIOS to avoid IRQ conflict with other + ISA devices. Please refer to hardware installation procedure in User's + Manual in advance. PCI IRQ Sharing --------------- @@ -138,42 +101,11 @@ PCI IRQ Sharing together on one system and they can share the same IRQ. -3.2 Driver files -================ - The driver file may be obtained from ftp, CD-ROM or floppy disk. The - first step, anyway, is to copy driver file "mxser.tgz" into specified - directory. e.g. /moxa. The execute commands as below:: - - # cd / - # mkdir moxa - # cd /moxa - # tar xvf /dev/fd0 - -or:: - - # cd / - # mkdir moxa - # cd /moxa - # cp /mnt/cdrom//mxser.tgz . - # tar xvfz mxser.tgz - - -3.3 Device naming convention +3.2 Device naming convention ============================ - You may find all the driver and utilities files in /moxa/mxser. - Following installation procedure depends on the model you'd like to - run the driver. If you prefer module driver, please refer to 3.4. - If static driver is required, please refer to 3.5. - -Dialin and callout port ------------------------ - - This driver remains traditional serial device properties. There are - two special file name for each serial port. One is dial-in port - which is named "ttyMxx". For callout port, the naming convention - is "cumxx". + The device node is named "ttyMxx". Device naming when more than 2 boards installed ----------------------------------------------- @@ -181,322 +113,13 @@ Device naming when more than 2 boards installed Naming convention for each Smartio/Industio multiport board is pre-defined as below. - ============ =============== ============== - Board Num. Dial-in Port Callout port - 1st board ttyM0 - ttyM7 cum0 - cum7 - 2nd board ttyM8 - ttyM15 cum8 - cum15 - 3rd board ttyM16 - ttyM23 cum16 - cum23 - 4th board ttyM24 - ttym31 cum24 - cum31 - ============ =============== ============== - -.. note:: - - Under Kernel 2.6 and upper, the cum Device is Obsolete. So use ttyM* - device instead. - -Board sequence --------------- - - This driver will activate ISA boards according to the parameter set - in the driver. After all specified ISA board activated, PCI board - will be installed in the system automatically driven. - Therefore the board number is sorted by the CAP address of ISA boards. - For PCI boards, their sequence will be after ISA boards and C168H/PCI - has higher priority than C104H/PCI boards. - -3.4 Module driver configuration -=============================== - - Module driver is easiest way to install. If you prefer static driver - installation, please skip this paragraph. - - - ------------- Prepare to use the MOXA driver -------------------- - -3.4.1 Create tty device with correct major number -------------------------------------------------- - - Before using MOXA driver, your system must have the tty devices - which are created with driver's major number. We offer one shell - script "msmknod" to simplify the procedure. - This step is only needed to be executed once. But you still - need to do this procedure when: - - a. You change the driver's major number. Please refer the "3.7" - section. - b. Your total installed MOXA boards number is changed. Maybe you - add/delete one MOXA board. - c. You want to change the tty name. This needs to modify the - shell script "msmknod" - - The procedure is:: - - # cd /moxa/mxser/driver - # ./msmknod - - This shell script will require the major number for dial-in - device and callout device to create tty device. You also need - to specify the total installed MOXA board number. Default major - numbers for dial-in device and callout device are 30, 35. If - you need to change to other number, please refer section "3.7" - for more detailed procedure. - Msmknod will delete any special files occupying the same device - naming. - -3.4.2 Build the MOXA driver and utilities ------------------------------------------ - - Before using the MOXA driver and utilities, you need compile the - all the source code. This step is only need to be executed once. - But you still re-compile the source code if you modify the source - code. For example, if you change the driver's major number (see - "3.7" section), then you need to do this step again. - - Find "Makefile" in /moxa/mxser, then run - - # make clean; make install - - ..note:: - - For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1: - # make clean; make installsp1 - - For Red Hat Enterprise Linux AS4/ES4/WS4: - # make clean; make installsp2 - - The driver files "mxser.o" and utilities will be properly compiled - and copied to system directories respectively. - -------------- Load MOXA driver-------------------- - -3.4.3 Load the MOXA driver --------------------------- - - :: - - # modprobe mxser - - will activate the module driver. You may run "lsmod" to check - if "mxser" is activated. If the MOXA board is ISA board, the - is needed. Please refer to section "3.4.5" for more - information. - -------------- Load MOXA driver on boot -------------------- - -3.4.4 Load the mxser driver ---------------------------- - - - For the above description, you may manually execute - "modprobe mxser" to activate this driver and run - "rmmod mxser" to remove it. - - However, it's better to have a boot time configuration to - eliminate manual operation. Boot time configuration can be - achieved by rc file. We offer one "rc.mxser" file to simplify - the procedure under "moxa/mxser/driver". - - But if you use ISA board, please modify the "modprobe ..." command - to add the argument (see "3.4.5" section). After modifying the - rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser" - manually to make sure the modification is ok. If any error - encountered, please try to modify again. If the modification is - completed, follow the below step. - - Run following command for setting rc files:: - - # cd /moxa/mxser/driver - # cp ./rc.mxser /etc/rc.d - # cd /etc/rc.d - - Check "rc.serial" is existed or not. If "rc.serial" doesn't exist, - create it by vi, run "chmod 755 rc.serial" to change the permission. - - Add "/etc/rc.d/rc.mxser" in last line. - - Reboot and check if moxa.o activated by "lsmod" command. - -3.4.5. specify CAP address --------------------------- - - If you'd like to drive Smartio/Industio ISA boards in the system, - you'll have to add parameter to specify CAP address of given - board while activating "mxser.o". The format for parameters are - as follows.:: - - modprobe mxser ioaddr=0x???,0x???,0x???,0x??? - | | | | - | | | +- 4th ISA board - | | +------ 3rd ISA board - | +------------ 2nd ISA board - +-------------------1st ISA board - -3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x -================================================================ - - Note: - To use static driver, you must install the linux kernel - source package. - -3.5.1 Backup the built-in driver in the kernel ----------------------------------------------- - - :: - - # cd /usr/src/linux/drivers/char - # mv mxser.c mxser.c.old - - For Red Hat 7.x user, you need to create link: - # cd /usr/src - # ln -s linux-2.4 linux - -3.5.2 Create link ------------------ - :: - - # cd /usr/src/linux/drivers/char - # ln -s /moxa/mxser/driver/mxser.c mxser.c - -3.5.3 Add CAP address list for ISA boards. ------------------------------------------- - - For PCI boards user, please skip this step. - - In module mode, the CAP address for ISA board is given by - parameter. In static driver configuration, you'll have to - assign it within driver's source code. If you will not - install any ISA boards, you may skip to next portion. - The instructions to modify driver source code are as - below. - - a. run:: - - # cd /moxa/mxser/driver - # vi mxser.c - - b. Find the array mxserBoardCAP[] as below:: - - static int mxserBoardCAP[] = {0x00, 0x00, 0x00, 0x00}; - - c. Change the address within this array using vi. For - example, to driver 2 ISA boards with CAP address - 0x280 and 0x180 as 1st and 2nd board. Just to change - the source code as follows:: - - static int mxserBoardCAP[] = {0x280, 0x180, 0x00, 0x00}; - -3.5.4 Setup kernel configuration --------------------------------- - - Configure the kernel:: - - # cd /usr/src/linux - # make menuconfig - - You will go into a menu-driven system. Please select [Character - devices][Non-standard serial port support], enable the [Moxa - SmartIO support] driver with "[*]" for built-in (not "[M]"), then - select [Exit] to exit this program. - -3.5.5 Rebuild kernel --------------------- - - The following are for Linux kernel rebuilding, for your - reference only. - - For appropriate details, please refer to the Linux document: - - a. Run the following commands:: - - cd /usr/src/linux - make clean # take a few minutes - make dep # take a few minutes - make bzImage # take probably 10-20 minutes - make install # copy boot image to correct position - - f. Please make sure the boot kernel (vmlinuz) is in the - correct position. - g. If you use 'lilo' utility, you should check /etc/lilo.conf - 'image' item specified the path which is the 'vmlinuz' path, - or you will load wrong (or old) boot kernel image (vmlinuz). - After checking /etc/lilo.conf, please run "lilo". - - Note that if the result of "make bzImage" is ERROR, then you have to - go back to Linux configuration Setup. Type "make menuconfig" in - directory /usr/src/linux. - - -3.5.6 Make tty device and special file --------------------------------------- - - :: - # cd /moxa/mxser/driver - # ./msmknod - -3.5.7 Make utility ------------------- - - :: - - # cd /moxa/mxser/utility - # make clean; make install - -3.5.8 Reboot ------------- - - - -3.6 Custom configuration -======================== - - Although this driver already provides you default configuration, you - still can change the device name and major number. The instruction to - change these parameters are shown as below. - -a. Change Device name - - If you'd like to use other device names instead of default naming - convention, all you have to do is to modify the internal code - within the shell script "msmknod". First, you have to open "msmknod" - by vi. Locate each line contains "ttyM" and "cum" and change them - to the device name you desired. "msmknod" creates the device names - you need next time executed. - -b. Change Major number - - If major number 30 and 35 had been occupied, you may have to select - 2 free major numbers for this driver. There are 3 steps to change - major numbers. - -3.6.1 Find free major numbers ------------------------------ - - In /proc/devices, you may find all the major numbers occupied - in the system. Please select 2 major numbers that are available. - e.g. 40, 45. - -3.6.2 Create special files --------------------------- - - Run /moxa/mxser/driver/msmknod to create special files with - specified major numbers. - -3.6.3 Modify driver with new major number ------------------------------------------ - - Run vi to open /moxa/mxser/driver/mxser.c. Locate the line - contains "MXSERMAJOR". Change the content as below:: - - #define MXSERMAJOR 40 - #define MXSERCUMAJOR 45 - - 3.6.4 Run "make clean; make install" in /moxa/mxser/driver. - -3.7 Verify driver installation -============================== - - You may refer to /var/log/messages to check the latest status - log reported by this driver whenever it's activated. + ============ =============== + Board Num. Device node + 1st board ttyM0 - ttyM7 + 2nd board ttyM8 - ttyM15 + 3rd board ttyM16 - ttyM23 + 4th board ttyM24 - ttyM31 + ============ =============== 4. Utilities ^^^^^^^^^^^^ @@ -505,14 +128,11 @@ b. Change Major number msterm. These 3 utilities are released in form of source code. They should be compiled into executable file and copied into /usr/bin. - Before using these utilities, please load driver (refer 3.4 & 3.5) and - make sure you had run the "msmknod" utility. - msdiag - Diagnostic =================== This utility provides the function to display what Moxa Smartio/Industio - board found by driver in the system. + board was found by the driver in the system. msmon - Port Monitoring ======================= @@ -542,23 +162,23 @@ msterm - Terminal Emulation Supported Setserial parameters are listed as below. - ============== ========================================================= - uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) - close_delay set the amount of time(in 1/100 of a second) that DTR + ============== ============================================================= + uart set UART type(16450 --> disable FIFO, 16550A --> enable FIFO) + close_delay set the amount of time (in 1/100 of a second) that DTR should be kept low while being closed. - closing_wait set the amount of time(in 1/100 of a second) that the + closing_wait set the amount of time (in 1/100 of a second) that the serial port should wait for data to be drained while - being closed, before the receiver is disable. - spd_hi Use 57.6kb when the application requests 38.4kb. - spd_vhi Use 115.2kb when the application requests 38.4kb. - spd_shi Use 230.4kb when the application requests 38.4kb. - spd_warp Use 460.8kb when the application requests 38.4kb. - spd_normal Use 38.4kb when the application requests 38.4kb. - spd_cust Use the custom divisor to set the speed when the + being closed, before the receiver is disabled. + spd_hi Use 57.6kb when the application requests 38.4kb. + spd_vhi Use 115.2kb when the application requests 38.4kb. + spd_shi Use 230.4kb when the application requests 38.4kb. + spd_warp Use 460.8kb when the application requests 38.4kb. + spd_normal Use 38.4kb when the application requests 38.4kb. + spd_cust Use the custom divisor to set the speed when the application requests 38.4kb. - divisor This option set the custom division. - baud_base This option set the base baud rate. - ============== ========================================================= + divisor This option sets the custom division. + baud_base This option sets the base baud rate. + ============== ============================================================= 6. Troubleshooting ^^^^^^^^^^^^^^^^^^ @@ -575,41 +195,3 @@ msterm - Terminal Emulation Solution: To avoid this problem, please unplug fifth and after board, because Moxa driver supports up to 4 boards. - - Error msg: - Request_irq fail, IRQ(?) may be conflict with another device. - - Solution: - Other PCI or ISA devices occupy the assigned IRQ. If you are not sure - which device causes the situation, please check /proc/interrupts to find - free IRQ and simply change another free IRQ for Moxa board. - - Error msg: - Board #: C1xx Series(CAP=xxx) interrupt number invalid. - - Solution: - Each port within the same multiport board shares the same IRQ. Please set - one IRQ (IRQ doesn't equal to zero) for one Moxa board. - - Error msg: - No interrupt vector be set for Moxa ISA board(CAP=xxx). - - Solution: - Moxa ISA board needs an interrupt vector.Please refer to user's manual - "Hardware Installation" chapter to set interrupt vector. - - Error msg: - Couldn't install MOXA Smartio/Industio family driver! - - Solution: - Load Moxa driver fail, the major number may conflict with other devices. - Please refer to previous section 3.7 to change a free major number for - Moxa driver. - - Error msg: - Couldn't install MOXA Smartio/Industio family callout driver! - - Solution: - Load Moxa callout driver fail, the callout device major number may - conflict with other devices. Please refer to previous section 3.7 to - change a free callout device major number for Moxa driver. diff --git a/Documentation/networking/caif/caif.rst b/Documentation/networking/caif/caif.rst index 81a14373d780..d922d419c513 100644 --- a/Documentation/networking/caif/caif.rst +++ b/Documentation/networking/caif/caif.rst @@ -69,9 +69,9 @@ There are debugfs parameters provided for serial communication. - 0x01 - tty->warned is on. - 0x04 - tty->packed is on. - - 0x08 - tty->flow_stopped is on. + - 0x08 - tty->flow.tco_stopped is on. - 0x10 - tty->hw_stopped is on. - - 0x20 - tty->stopped is on. + - 0x20 - tty->flow.stopped is on. * last_tx_msg: Binary blob Prints the last transmitted frame. diff --git a/MAINTAINERS b/MAINTAINERS index f2bfabc9bc64..3298f4592ce7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12527,7 +12527,8 @@ S: Maintained F: drivers/net/phy/motorcomm.c MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD -S: Orphan +M: Jiri Slaby +S: Maintained F: Documentation/driver-api/serial/moxa-smartio.rst F: drivers/tty/mxser.* @@ -18771,9 +18772,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git F: Documentation/driver-api/serial/ F: drivers/tty/ F: drivers/tty/serial/serial_core.c +F: include/linux/selection.h F: include/linux/serial.h F: include/linux/serial_core.h -F: include/linux/tty.h +F: include/linux/sysrq.h +F: include/linux/tty*.h +F: include/linux/vt.h +F: include/linux/vt_*.h F: include/uapi/linux/serial.h F: include/uapi/linux/serial_core.h F: include/uapi/linux/tty.h diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c index 438b10c44d73..fc03471a0b0f 100644 --- a/arch/alpha/kernel/srmcons.c +++ b/arch/alpha/kernel/srmcons.c @@ -142,18 +142,12 @@ srmcons_write(struct tty_struct *tty, return count; } -static int +static unsigned int srmcons_write_room(struct tty_struct *tty) { return 512; } -static int -srmcons_chars_in_buffer(struct tty_struct *tty) -{ - return 0; -} - static int srmcons_open(struct tty_struct *tty, struct file *filp) { @@ -200,7 +194,6 @@ static const struct tty_operations srmcons_ops = { .close = srmcons_close, .write = srmcons_write, .write_room = srmcons_write_room, - .chars_in_buffer= srmcons_chars_in_buffer, }; static int __init diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index be040b6a02fa..5a5fa6190a52 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -651,6 +651,7 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + fsl,dma-info = <24 20>; status = "okay"; }; @@ -670,6 +671,7 @@ &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; + fsl,dma-info = <4096 4>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 456dcd4a7793..6ffbb099fcac 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -134,7 +134,7 @@ uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x200>; + reg = <0x12000 0x18>; clocks = <&xtalclk>; interrupts = , diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c index 57e8c8fb5eba..92636c89d65b 100644 --- a/arch/m68k/emu/nfcon.c +++ b/arch/m68k/emu/nfcon.c @@ -85,7 +85,7 @@ static int nfcon_tty_put_char(struct tty_struct *tty, unsigned char ch) return 1; } -static int nfcon_tty_write_room(struct tty_struct *tty) +static unsigned int nfcon_tty_write_room(struct tty_struct *tty) { return 64; } diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c index 11e9527c6e44..ee7471984fe7 100644 --- a/arch/mips/mti-malta/malta-platform.c +++ b/arch/mips/mti-malta/malta-platform.c @@ -33,7 +33,8 @@ .irq = int, \ .uartclk = 1843200, \ .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | \ + UPF_MAGIC_MULTIPLIER, \ .regshift = 0, \ } diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c index 7ed404c60a9e..39ccad063533 100644 --- a/arch/parisc/kernel/pdc_cons.c +++ b/arch/parisc/kernel/pdc_cons.c @@ -103,22 +103,16 @@ static int pdc_console_tty_write(struct tty_struct *tty, const unsigned char *bu return count; } -static int pdc_console_tty_write_room(struct tty_struct *tty) +static unsigned int pdc_console_tty_write_room(struct tty_struct *tty) { return 32768; /* no limit, no buffer used */ } -static int pdc_console_tty_chars_in_buffer(struct tty_struct *tty) -{ - return 0; /* no buffer */ -} - static const struct tty_operations pdc_console_tty_ops = { .open = pdc_console_tty_open, .close = pdc_console_tty_close, .write = pdc_console_tty_write, .write_room = pdc_console_tty_write_room, - .chars_in_buffer = pdc_console_tty_chars_in_buffer, }; static void pdc_console_poll(struct timer_list *unused) diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 1fd9d1260f9e..ee09f7bb6ea9 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -621,7 +621,6 @@ CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_VIRTIO=m CONFIG_NVRAM=y CONFIG_DTLK=m -CONFIG_R3964=m CONFIG_CARDMAN_4000=m CONFIG_CARDMAN_4040=m CONFIG_IPWIRELESS=m diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 1c70a31e7c5b..fbc623d2cc07 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -32,7 +32,7 @@ static irqreturn_t line_interrupt(int irq, void *data) * * Should be called while holding line->lock (this does not modify data). */ -static int write_room(struct line *line) +static unsigned int write_room(struct line *line) { int n; @@ -47,11 +47,11 @@ static int write_room(struct line *line) return n - 1; } -int line_write_room(struct tty_struct *tty) +unsigned int line_write_room(struct tty_struct *tty) { struct line *line = tty->driver_data; unsigned long flags; - int room; + unsigned int room; spin_lock_irqsave(&line->lock, flags); room = write_room(line); @@ -60,11 +60,11 @@ int line_write_room(struct tty_struct *tty) return room; } -int line_chars_in_buffer(struct tty_struct *tty) +unsigned int line_chars_in_buffer(struct tty_struct *tty) { struct line *line = tty->driver_data; unsigned long flags; - int ret; + unsigned int ret; spin_lock_irqsave(&line->lock, flags); /* write_room subtracts 1 for the needed NULL, so we readd it.*/ @@ -211,11 +211,6 @@ out_up: return ret; } -void line_set_termios(struct tty_struct *tty, struct ktermios * old) -{ - /* nothing */ -} - void line_throttle(struct tty_struct *tty) { struct line *line = tty->driver_data; diff --git a/arch/um/drivers/line.h b/arch/um/drivers/line.h index 01d21e76144f..bdb16b96e76f 100644 --- a/arch/um/drivers/line.h +++ b/arch/um/drivers/line.h @@ -66,11 +66,10 @@ extern int line_setup(char **conf, unsigned nlines, char **def, char *init, char *name); extern int line_write(struct tty_struct *tty, const unsigned char *buf, int len); -extern void line_set_termios(struct tty_struct *tty, struct ktermios * old); -extern int line_chars_in_buffer(struct tty_struct *tty); +extern unsigned int line_chars_in_buffer(struct tty_struct *tty); extern void line_flush_buffer(struct tty_struct *tty); extern void line_flush_chars(struct tty_struct *tty); -extern int line_write_room(struct tty_struct *tty); +extern unsigned int line_write_room(struct tty_struct *tty); extern void line_throttle(struct tty_struct *tty); extern void line_unthrottle(struct tty_struct *tty); diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index 6476b28d7c5e..41eae2e8fb65 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -99,7 +99,6 @@ static const struct tty_operations ssl_ops = { .chars_in_buffer = line_chars_in_buffer, .flush_buffer = line_flush_buffer, .flush_chars = line_flush_chars, - .set_termios = line_set_termios, .throttle = line_throttle, .unthrottle = line_unthrottle, .install = ssl_install, diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 37b127941e6f..e8b762f4d8c2 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -106,7 +106,6 @@ static const struct tty_operations console_ops = { .chars_in_buffer = line_chars_in_buffer, .flush_buffer = line_flush_buffer, .flush_chars = line_flush_chars, - .set_termios = line_set_termios, .throttle = line_throttle, .unthrottle = line_unthrottle, .hangup = line_hangup, diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index a3dda25a4e45..21184488c277 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -100,18 +100,12 @@ static void rs_flush_chars(struct tty_struct *tty) { } -static int rs_write_room(struct tty_struct *tty) +static unsigned int rs_write_room(struct tty_struct *tty) { /* Let's say iss can always accept 2K characters.. */ return 2 * 1024; } -static int rs_chars_in_buffer(struct tty_struct *tty) -{ - /* the iss doesn't buffer characters */ - return 0; -} - static void rs_hangup(struct tty_struct *tty) { /* Stub, once again.. */ @@ -135,7 +129,6 @@ static const struct tty_operations serial_ops = { .put_char = rs_put_char, .flush_chars = rs_flush_chars, .write_room = rs_write_room, - .chars_in_buffer = rs_chars_in_buffer, .hangup = rs_hangup, .wait_until_sent = rs_wait_until_sent, .proc_show = rs_proc_show, diff --git a/drivers/accessibility/speakup/spk_ttyio.c b/drivers/accessibility/speakup/spk_ttyio.c index 2e39fcf492d8..0d1f397cd896 100644 --- a/drivers/accessibility/speakup/spk_ttyio.c +++ b/drivers/accessibility/speakup/spk_ttyio.c @@ -72,7 +72,8 @@ static void spk_ttyio_ldisc_close(struct tty_struct *tty) } static int spk_ttyio_receive_buf2(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) + const unsigned char *cp, + const char *fp, int count) { struct spk_ldisc_data *ldisc_data = tty->disc_data; struct spk_synth *synth = ldisc_data->synth; @@ -104,6 +105,7 @@ static int spk_ttyio_receive_buf2(struct tty_struct *tty, static struct tty_ldisc_ops spk_ttyio_ldisc_ops = { .owner = THIS_MODULE, + .num = N_SPEAKUP, .name = "speakup_ldisc", .open = spk_ttyio_ldisc_open, .close = spk_ttyio_ldisc_close, @@ -211,14 +213,13 @@ static int spk_ttyio_initialise_ldisc(struct spk_synth *synth) void spk_ttyio_register_ldisc(void) { - if (tty_register_ldisc(N_SPEAKUP, &spk_ttyio_ldisc_ops)) + if (tty_register_ldisc(&spk_ttyio_ldisc_ops)) pr_warn("speakup: Error registering line discipline. Most synths won't work.\n"); } void spk_ttyio_unregister_ldisc(void) { - if (tty_unregister_ldisc(N_SPEAKUP)) - pr_warn("speakup: Couldn't unregister ldisc\n"); + tty_unregister_ldisc(&spk_ttyio_ldisc_ops); } static int spk_ttyio_out(struct spk_synth *in_synth, const char ch) diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 71a4ca505e09..5ed2cfa7da1d 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -593,7 +593,7 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty) * Return Value: None */ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, - char *flags, int count) + const char *flags, int count) { struct hci_uart *hu = tty->disc_data; @@ -821,6 +821,7 @@ static __poll_t hci_uart_tty_poll(struct tty_struct *tty, static struct tty_ldisc_ops hci_uart_ldisc = { .owner = THIS_MODULE, + .num = N_HCI, .name = "n_hci", .open = hci_uart_tty_open, .close = hci_uart_tty_close, @@ -840,7 +841,7 @@ static int __init hci_uart_init(void) BT_INFO("HCI UART driver ver %s", VERSION); /* Register the tty discipline */ - err = tty_register_ldisc(N_HCI, &hci_uart_ldisc); + err = tty_register_ldisc(&hci_uart_ldisc); if (err) { BT_ERR("HCI line discipline registration failed. (%d)", err); return err; @@ -882,8 +883,6 @@ static int __init hci_uart_init(void) static void __exit hci_uart_exit(void) { - int err; - #ifdef CONFIG_BT_HCIUART_H4 h4_deinit(); #endif @@ -915,10 +914,7 @@ static void __exit hci_uart_exit(void) mrvl_deinit(); #endif - /* Release tty registration of line discipline */ - err = tty_unregister_ldisc(N_HCI); - if (err) - BT_ERR("Can't unregister HCI line discipline (%d)", err); + tty_unregister_ldisc(&hci_uart_ldisc); } module_init(hci_uart_init); diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 8e516aad632b..ea3ead00f30f 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -218,19 +218,6 @@ config XILINX_HWICAP If unsure, say N. -config R3964 - tristate "Siemens R3964 line discipline" - depends on TTY && BROKEN - help - This driver allows synchronous communication with devices using the - Siemens R3964 packet protocol. Unless you are dealing with special - hardware like PLCs, you are unlikely to need this. - - To compile this driver as a module, choose M here: the - module will be called n_r3964. - - If unsure, say N. - config APPLICOM tristate "Applicom intelligent fieldbus card support" depends on PCI diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 3287a7627ed0..6eaefea0520e 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -985,7 +985,7 @@ static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty) else #endif { - if (tty && (tty->stopped || tty->hw_stopped)) { + if (tty && (tty->flow.stopped || tty->hw_stopped)) { tx_stop(info); return; } @@ -1005,7 +1005,7 @@ static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty) if (!info->tx_active) return; } else { - if (tty && (tty->stopped || tty->hw_stopped)) { + if (tty && (tty->flow.stopped || tty->hw_stopped)) { tx_stop(info); return; } @@ -1419,13 +1419,7 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty) /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: info->params.data_bits = 5; break; - case CS6: info->params.data_bits = 6; break; - case CS7: info->params.data_bits = 7; break; - case CS8: info->params.data_bits = 8; break; - default: info->params.data_bits = 7; break; - } + info->params.data_bits = tty_get_char_size(cflag); if (cflag & CSTOPB) info->params.stop_bits = 2; @@ -1525,7 +1519,7 @@ static void mgslpc_flush_chars(struct tty_struct *tty) if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars")) return; - if (info->tx_count <= 0 || tty->stopped || + if (info->tx_count <= 0 || tty->flow.stopped || tty->hw_stopped || !info->tx_buf) return; @@ -1594,7 +1588,7 @@ static int mgslpc_write(struct tty_struct * tty, ret += c; } start: - if (info->tx_count && !tty->stopped && !tty->hw_stopped) { + if (info->tx_count && !tty->flow.stopped && !tty->hw_stopped) { spin_lock_irqsave(&info->lock, flags); if (!info->tx_active) tx_start(info, tty); @@ -1609,7 +1603,7 @@ cleanup: /* Return the count of free bytes in transmit buffer */ -static int mgslpc_write_room(struct tty_struct *tty) +static unsigned int mgslpc_write_room(struct tty_struct *tty) { MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; int ret; @@ -1637,10 +1631,10 @@ static int mgslpc_write_room(struct tty_struct *tty) /* Return the count of bytes in transmit buffer */ -static int mgslpc_chars_in_buffer(struct tty_struct *tty) +static unsigned int mgslpc_chars_in_buffer(struct tty_struct *tty) { MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - int rc; + unsigned int rc; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_chars_in_buffer(%s)\n", @@ -1655,7 +1649,7 @@ static int mgslpc_chars_in_buffer(struct tty_struct *tty) rc = info->tx_count; if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n", + printk("%s(%d):mgslpc_chars_in_buffer(%s)=%u\n", __FILE__, __LINE__, info->device_name, rc); return rc; diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c index 93f5d11c830b..230b2c9b3e3c 100644 --- a/drivers/char/ttyprintk.c +++ b/drivers/char/ttyprintk.c @@ -52,12 +52,7 @@ static void tpk_flush(void) static int tpk_printk(const unsigned char *buf, int count) { - int i = tpk_curr; - - if (buf == NULL) { - tpk_flush(); - return i; - } + int i; for (i = 0; i < count; i++) { if (tpk_curr >= TPK_STR_SIZE) { @@ -100,12 +95,6 @@ static int tpk_open(struct tty_struct *tty, struct file *filp) static void tpk_close(struct tty_struct *tty, struct file *filp) { struct ttyprintk_port *tpkp = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&tpkp->spinlock, flags); - /* flush tpk_printk buffer */ - tpk_printk(NULL, 0); - spin_unlock_irqrestore(&tpkp->spinlock, flags); tty_port_close(&tpkp->port, tty, filp); } @@ -120,7 +109,6 @@ static int tpk_write(struct tty_struct *tty, unsigned long flags; int ret; - /* exclusive use of tpk_printk within this tty */ spin_lock_irqsave(&tpkp->spinlock, flags); ret = tpk_printk(buf, count); @@ -132,32 +120,11 @@ static int tpk_write(struct tty_struct *tty, /* * TTY operations write_room function. */ -static int tpk_write_room(struct tty_struct *tty) +static unsigned int tpk_write_room(struct tty_struct *tty) { return TPK_MAX_ROOM; } -/* - * TTY operations ioctl function. - */ -static int tpk_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct ttyprintk_port *tpkp = tty->driver_data; - - if (!tpkp) - return -EINVAL; - - switch (cmd) { - /* Stop TIOCCONS */ - case TIOCCONS: - return -EOPNOTSUPP; - default: - return -ENOIOCTLCMD; - } - return 0; -} - /* * TTY operations hangup function. */ @@ -168,16 +135,31 @@ static void tpk_hangup(struct tty_struct *tty) tty_port_hangup(&tpkp->port); } +/* + * TTY port operations shutdown function. + */ +static void tpk_port_shutdown(struct tty_port *tport) +{ + struct ttyprintk_port *tpkp = + container_of(tport, struct ttyprintk_port, port); + unsigned long flags; + + spin_lock_irqsave(&tpkp->spinlock, flags); + tpk_flush(); + spin_unlock_irqrestore(&tpkp->spinlock, flags); +} + static const struct tty_operations ttyprintk_ops = { .open = tpk_open, .close = tpk_close, .write = tpk_write, .write_room = tpk_write_room, - .ioctl = tpk_ioctl, .hangup = tpk_hangup, }; -static const struct tty_port_operations null_ops = { }; +static const struct tty_port_operations tpk_port_ops = { + .shutdown = tpk_port_shutdown, +}; static struct tty_driver *ttyprintk_driver; @@ -195,7 +177,7 @@ static int __init ttyprintk_init(void) return PTR_ERR(ttyprintk_driver); tty_port_init(&tpk_port.port); - tpk_port.port.ops = &null_ops; + tpk_port.port.ops = &tpk_port_ops; ttyprintk_driver->driver_name = "ttyprintk"; ttyprintk_driver->name = "ttyprintk"; diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index 33e9d9bfd036..7fbbe00e3553 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -114,7 +114,8 @@ static void serport_ldisc_close(struct tty_struct *tty) * 'interrupt' routine. */ -static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) +static void serport_ldisc_receive(struct tty_struct *tty, + const unsigned char *cp, const char *fp, int count) { struct serport *serport = (struct serport*) tty->disc_data; unsigned long flags; @@ -273,6 +274,7 @@ static void serport_ldisc_write_wakeup(struct tty_struct * tty) static struct tty_ldisc_ops serport_ldisc = { .owner = THIS_MODULE, + .num = N_MOUSE, .name = "input", .open = serport_ldisc_open, .close = serport_ldisc_close, @@ -293,7 +295,7 @@ static struct tty_ldisc_ops serport_ldisc = { static int __init serport_init(void) { int retval; - retval = tty_register_ldisc(N_MOUSE, &serport_ldisc); + retval = tty_register_ldisc(&serport_ldisc); if (retval) printk(KERN_ERR "serport.c: Error registering line discipline.\n"); @@ -302,7 +304,7 @@ static int __init serport_init(void) static void __exit serport_exit(void) { - tty_unregister_ldisc(N_MOUSE); + tty_unregister_ldisc(&serport_ldisc); } module_init(serport_init); diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index 2a3a94f72dfb..20fa02c81070 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -458,14 +458,14 @@ static int ipoctal_write_tty(struct tty_struct *tty, return char_copied; } -static int ipoctal_write_room(struct tty_struct *tty) +static unsigned int ipoctal_write_room(struct tty_struct *tty) { struct ipoctal_channel *channel = tty->driver_data; return PAGE_SIZE - channel->nb_bytes; } -static int ipoctal_chars_in_buffer(struct tty_struct *tty) +static unsigned int ipoctal_chars_in_buffer(struct tty_struct *tty) { struct ipoctal_channel *channel = tty->driver_data; diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index fdf87acccd06..d5f9261fa879 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -1158,8 +1158,6 @@ static void capinc_tty_flush_chars(struct tty_struct *tty) struct capiminor *mp = tty->driver_data; struct sk_buff *skb; - pr_debug("capinc_tty_flush_chars\n"); - spin_lock_bh(&mp->outlock); skb = mp->outskb; if (skb) { @@ -1175,18 +1173,18 @@ static void capinc_tty_flush_chars(struct tty_struct *tty) handle_minor_recv(mp); } -static int capinc_tty_write_room(struct tty_struct *tty) +static unsigned int capinc_tty_write_room(struct tty_struct *tty) { struct capiminor *mp = tty->driver_data; - int room; + unsigned int room; room = CAPINC_MAX_SENDQUEUE-skb_queue_len(&mp->outqueue); room *= CAPI_MAX_BLKSIZE; - pr_debug("capinc_tty_write_room = %d\n", room); + pr_debug("capinc_tty_write_room = %u\n", room); return room; } -static int capinc_tty_chars_in_buffer(struct tty_struct *tty) +static unsigned int capinc_tty_chars_in_buffer(struct tty_struct *tty) { struct capiminor *mp = tty->driver_data; @@ -1197,15 +1195,9 @@ static int capinc_tty_chars_in_buffer(struct tty_struct *tty) return mp->outbytes; } -static void capinc_tty_set_termios(struct tty_struct *tty, struct ktermios *old) -{ - pr_debug("capinc_tty_set_termios\n"); -} - static void capinc_tty_throttle(struct tty_struct *tty) { struct capiminor *mp = tty->driver_data; - pr_debug("capinc_tty_throttle\n"); mp->ttyinstop = 1; } @@ -1213,7 +1205,6 @@ static void capinc_tty_unthrottle(struct tty_struct *tty) { struct capiminor *mp = tty->driver_data; - pr_debug("capinc_tty_unthrottle\n"); mp->ttyinstop = 0; handle_minor_recv(mp); } @@ -1222,7 +1213,6 @@ static void capinc_tty_stop(struct tty_struct *tty) { struct capiminor *mp = tty->driver_data; - pr_debug("capinc_tty_stop\n"); mp->ttyoutstop = 1; } @@ -1230,7 +1220,6 @@ static void capinc_tty_start(struct tty_struct *tty) { struct capiminor *mp = tty->driver_data; - pr_debug("capinc_tty_start\n"); mp->ttyoutstop = 0; handle_minor_send(mp); } @@ -1239,26 +1228,9 @@ static void capinc_tty_hangup(struct tty_struct *tty) { struct capiminor *mp = tty->driver_data; - pr_debug("capinc_tty_hangup\n"); tty_port_hangup(&mp->port); } -static int capinc_tty_break_ctl(struct tty_struct *tty, int state) -{ - pr_debug("capinc_tty_break_ctl(%d)\n", state); - return 0; -} - -static void capinc_tty_flush_buffer(struct tty_struct *tty) -{ - pr_debug("capinc_tty_flush_buffer\n"); -} - -static void capinc_tty_set_ldisc(struct tty_struct *tty) -{ - pr_debug("capinc_tty_set_ldisc\n"); -} - static void capinc_tty_send_xchar(struct tty_struct *tty, char ch) { pr_debug("capinc_tty_send_xchar(%d)\n", ch); @@ -1272,15 +1244,11 @@ static const struct tty_operations capinc_ops = { .flush_chars = capinc_tty_flush_chars, .write_room = capinc_tty_write_room, .chars_in_buffer = capinc_tty_chars_in_buffer, - .set_termios = capinc_tty_set_termios, .throttle = capinc_tty_throttle, .unthrottle = capinc_tty_unthrottle, .stop = capinc_tty_stop, .start = capinc_tty_start, .hangup = capinc_tty_hangup, - .break_ctl = capinc_tty_break_ctl, - .flush_buffer = capinc_tty_flush_buffer, - .set_ldisc = capinc_tty_set_ldisc, .send_xchar = capinc_tty_send_xchar, .install = capinc_tty_install, .cleanup = capinc_tty_cleanup, diff --git a/drivers/misc/bcm-vk/bcm_vk_tty.c b/drivers/misc/bcm-vk/bcm_vk_tty.c index 4d02692ecfc7..dae9eeed84a2 100644 --- a/drivers/misc/bcm-vk/bcm_vk_tty.c +++ b/drivers/misc/bcm-vk/bcm_vk_tty.c @@ -214,7 +214,7 @@ static int bcm_vk_tty_write(struct tty_struct *tty, return count; } -static int bcm_vk_tty_write_room(struct tty_struct *tty) +static unsigned int bcm_vk_tty_write_room(struct tty_struct *tty) { struct bcm_vk *vk = dev_get_drvdata(tty->dev); diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index 071844b58073..7f6976a9f508 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -52,13 +52,12 @@ static void remove_channel_from_table(struct st_data_s *st_gdata, */ int st_get_uart_wr_room(struct st_data_s *st_gdata) { - struct tty_struct *tty; if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) { pr_err("tty unavailable to perform write"); return -1; } - tty = st_gdata->tty; - return tty->ops->write_room(tty); + + return tty_write_room(st_gdata->tty); } /* @@ -798,7 +797,7 @@ static void st_tty_close(struct tty_struct *tty) } static void st_tty_receive(struct tty_struct *tty, const unsigned char *data, - char *tty_flags, int count) + const char *tty_flags, int count) { #ifdef VERBOSE print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE, @@ -845,6 +844,7 @@ static void st_tty_flush_buffer(struct tty_struct *tty) } static struct tty_ldisc_ops st_ldisc_ops = { + .num = N_TI_WL, .name = "n_st", .open = st_tty_open, .close = st_tty_close, @@ -860,7 +860,7 @@ int st_core_init(struct st_data_s **core_data) struct st_data_s *st_gdata; long err; - err = tty_register_ldisc(N_TI_WL, &st_ldisc_ops); + err = tty_register_ldisc(&st_ldisc_ops); if (err) { pr_err("error registering %d line discipline %ld", N_TI_WL, err); @@ -871,11 +871,8 @@ int st_core_init(struct st_data_s **core_data) st_gdata = kzalloc(sizeof(struct st_data_s), GFP_KERNEL); if (!st_gdata) { pr_err("memory allocation failed"); - err = tty_unregister_ldisc(N_TI_WL); - if (err) - pr_err("unable to un-register ldisc %ld", err); err = -ENOMEM; - return err; + goto err_unreg_ldisc; } /* Initialize ST TxQ and Tx waitQ queue head. All BT/FM/GPS module skb's @@ -890,17 +887,18 @@ int st_core_init(struct st_data_s **core_data) err = st_ll_init(st_gdata); if (err) { pr_err("error during st_ll initialization(%ld)", err); - kfree(st_gdata); - err = tty_unregister_ldisc(N_TI_WL); - if (err) - pr_err("unable to un-register ldisc"); - return err; + goto err_free_gdata; } INIT_WORK(&st_gdata->work_write_wakeup, work_fn_write_wakeup); *core_data = st_gdata; return 0; +err_free_gdata: + kfree(st_gdata); +err_unreg_ldisc: + tty_unregister_ldisc(&st_ldisc_ops); + return err; } void st_core_exit(struct st_data_s *st_gdata) @@ -918,9 +916,7 @@ void st_core_exit(struct st_data_s *st_gdata) kfree_skb(st_gdata->rx_skb); kfree_skb(st_gdata->tx_skb); /* TTY ldisc cleanup */ - err = tty_unregister_ldisc(N_TI_WL); - if (err) - pr_err("unable to un-register ldisc %ld", err); + tty_unregister_ldisc(&st_ldisc_ops); /* free the global data pointer */ kfree(st_gdata); } diff --git a/drivers/mmc/core/sdio_uart.c b/drivers/mmc/core/sdio_uart.c index be4067281caa..c36242b86b1d 100644 --- a/drivers/mmc/core/sdio_uart.c +++ b/drivers/mmc/core/sdio_uart.c @@ -439,7 +439,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) tty = tty_port_tty_get(&port->port); if (tty == NULL || !kfifo_len(xmit) || - tty->stopped || tty->hw_stopped) { + tty->flow.stopped || tty->hw_stopped) { sdio_uart_stop_tx(port); tty_kref_put(tty); return; @@ -797,13 +797,13 @@ static int sdio_uart_write(struct tty_struct *tty, const unsigned char *buf, return ret; } -static int sdio_uart_write_room(struct tty_struct *tty) +static unsigned int sdio_uart_write_room(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; return FIFO_SIZE - kfifo_len(&port->xmit_fifo); } -static int sdio_uart_chars_in_buffer(struct tty_struct *tty) +static unsigned int sdio_uart_chars_in_buffer(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; return kfifo_len(&port->xmit_fifo); diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c index 4ffbfd534f18..2a7af611d43a 100644 --- a/drivers/net/caif/caif_serial.c +++ b/drivers/net/caif/caif_serial.c @@ -87,9 +87,9 @@ static void ldisc_tx_wakeup(struct tty_struct *tty); static inline void update_tty_status(struct ser_device *ser) { ser->tty_status = - ser->tty->stopped << 5 | - ser->tty->flow_stopped << 3 | - ser->tty->packet << 2; + ser->tty->flow.stopped << 5 | + ser->tty->flow.tco_stopped << 3 | + ser->tty->ctrl.packet << 2; } static inline void debugfs_init(struct ser_device *ser, struct tty_struct *tty) { @@ -159,7 +159,7 @@ static inline void debugfs_tx(struct ser_device *ser, const u8 *data, int size) #endif static void ldisc_receive(struct tty_struct *tty, const u8 *data, - char *flags, int count) + const char *flags, int count) { struct sk_buff *skb = NULL; struct ser_device *ser; @@ -380,6 +380,7 @@ static void ldisc_close(struct tty_struct *tty) /* The line discipline structure. */ static struct tty_ldisc_ops caif_ldisc = { .owner = THIS_MODULE, + .num = N_CAIF, .name = "n_caif", .open = ldisc_open, .close = ldisc_close, @@ -429,7 +430,7 @@ static int __init caif_ser_init(void) { int ret; - ret = tty_register_ldisc(N_CAIF, &caif_ldisc); + ret = tty_register_ldisc(&caif_ldisc); if (ret < 0) pr_err("cannot register CAIF ldisc=%d err=%d\n", N_CAIF, ret); @@ -444,7 +445,7 @@ static void __exit caif_ser_exit(void) spin_unlock(&ser_lock); ser_release(NULL); cancel_work_sync(&ser_release_work); - tty_unregister_ldisc(N_CAIF); + tty_unregister_ldisc(&caif_ldisc); debugfs_remove_recursive(debugfsdir); } diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index 31ba6664503d..d42ec7d1bc14 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -467,7 +467,8 @@ static void slc_setup(struct net_device *dev) */ static void slcan_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) + const unsigned char *cp, const char *fp, + int count) { struct slcan *sl = (struct slcan *) tty->disc_data; @@ -697,6 +698,7 @@ static int slcan_ioctl(struct tty_struct *tty, struct file *file, static struct tty_ldisc_ops slc_ldisc = { .owner = THIS_MODULE, + .num = N_SLCAN, .name = "slcan", .open = slcan_open, .close = slcan_close, @@ -721,7 +723,7 @@ static int __init slcan_init(void) return -ENOMEM; /* Fill in our line protocol discipline, and register it */ - status = tty_register_ldisc(N_SLCAN, &slc_ldisc); + status = tty_register_ldisc(&slc_ldisc); if (status) { printk(KERN_ERR "slcan: can't register line discipline\n"); kfree(slcan_devs); @@ -782,9 +784,7 @@ static void __exit slcan_exit(void) kfree(slcan_devs); slcan_devs = NULL; - i = tty_unregister_ldisc(N_SLCAN); - if (i) - printk(KERN_ERR "slcan: can't unregister ldisc (err %d)\n", i); + tty_unregister_ldisc(&slc_ldisc); } module_init(slcan_init); diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index a15cc5e50290..fcf3af76b6d7 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -428,7 +428,7 @@ out: * and sent on to some IP layer for further processing. */ static void sixpack_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) + const unsigned char *cp, const char *fp, int count) { struct sixpack *sp; int count1; @@ -742,6 +742,7 @@ static int sixpack_ioctl(struct tty_struct *tty, struct file *file, static struct tty_ldisc_ops sp_ldisc = { .owner = THIS_MODULE, + .num = N_6PACK, .name = "6pack", .open = sixpack_open, .close = sixpack_close, @@ -764,21 +765,16 @@ static int __init sixpack_init_driver(void) printk(msg_banner); /* Register the provided line protocol discipline */ - if ((status = tty_register_ldisc(N_6PACK, &sp_ldisc)) != 0) + status = tty_register_ldisc(&sp_ldisc); + if (status) printk(msg_regfail, status); return status; } -static const char msg_unregfail[] = KERN_ERR \ - "6pack: can't unregister line discipline (err = %d)\n"; - static void __exit sixpack_exit_driver(void) { - int ret; - - if ((ret = tty_unregister_ldisc(N_6PACK))) - printk(msg_unregfail, ret); + tty_unregister_ldisc(&sp_ldisc); } /* encode an AX.25 packet into 6pack */ diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index b99128669bc8..8666110bec55 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -872,7 +872,7 @@ static int mkiss_ioctl(struct tty_struct *tty, struct file *file, * and sent on to the AX.25 layer for further processing. */ static void mkiss_receive_buf(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) + const char *fp, int count) { struct mkiss *ax = mkiss_get(tty); @@ -934,6 +934,7 @@ out: static struct tty_ldisc_ops ax_ldisc = { .owner = THIS_MODULE, + .num = N_AX25, .name = "mkiss", .open = mkiss_open, .close = mkiss_close, @@ -953,22 +954,16 @@ static int __init mkiss_init_driver(void) printk(banner); - status = tty_register_ldisc(N_AX25, &ax_ldisc); + status = tty_register_ldisc(&ax_ldisc); if (status != 0) printk(msg_regfail, status); return status; } -static const char msg_unregfail[] = KERN_ERR \ - "mkiss: can't unregister line discipline (err = %d)\n"; - static void __exit mkiss_exit_driver(void) { - int ret; - - if ((ret = tty_unregister_ldisc(N_AX25))) - printk(msg_unregfail, ret); + tty_unregister_ldisc(&ax_ldisc); } MODULE_AUTHOR("Ralf Baechle DL5RB "); diff --git a/drivers/net/ppp/ppp_async.c b/drivers/net/ppp/ppp_async.c index 8b41aa3fb64e..29a93d6bfe37 100644 --- a/drivers/net/ppp/ppp_async.c +++ b/drivers/net/ppp/ppp_async.c @@ -98,7 +98,7 @@ static int ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb); static int ppp_async_push(struct asyncppp *ap); static void ppp_async_flush_output(struct asyncppp *ap); static void ppp_async_input(struct asyncppp *ap, const unsigned char *buf, - char *flags, int count); + const char *flags, int count); static int ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd, unsigned long arg); static void ppp_async_process(struct tasklet_struct *t); @@ -340,7 +340,7 @@ ppp_asynctty_poll(struct tty_struct *tty, struct file *file, poll_table *wait) /* May sleep, don't call from interrupt level or with interrupts disabled */ static void ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf, - char *cflags, int count) + const char *cflags, int count) { struct asyncppp *ap = ap_get(tty); unsigned long flags; @@ -372,6 +372,7 @@ ppp_asynctty_wakeup(struct tty_struct *tty) static struct tty_ldisc_ops ppp_ldisc = { .owner = THIS_MODULE, + .num = N_PPP, .name = "ppp", .open = ppp_asynctty_open, .close = ppp_asynctty_close, @@ -389,7 +390,7 @@ ppp_async_init(void) { int err; - err = tty_register_ldisc(N_PPP, &ppp_ldisc); + err = tty_register_ldisc(&ppp_ldisc); if (err != 0) printk(KERN_ERR "PPP_async: error %d registering line disc.\n", err); @@ -829,7 +830,7 @@ process_input_packet(struct asyncppp *ap) static void ppp_async_input(struct asyncppp *ap, const unsigned char *buf, - char *flags, int count) + const char *flags, int count) { struct sk_buff *skb; int c, i, j, n, s, f; @@ -1015,8 +1016,7 @@ static void async_lcp_peek(struct asyncppp *ap, unsigned char *data, static void __exit ppp_async_cleanup(void) { - if (tty_unregister_ldisc(N_PPP) != 0) - printk(KERN_ERR "failed to unregister PPP line discipline\n"); + tty_unregister_ldisc(&ppp_ldisc); } module_init(ppp_async_init); diff --git a/drivers/net/ppp/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c index 576b6a93bf23..af3e048695b6 100644 --- a/drivers/net/ppp/ppp_synctty.c +++ b/drivers/net/ppp/ppp_synctty.c @@ -94,7 +94,7 @@ static void ppp_sync_process(struct tasklet_struct *t); static int ppp_sync_push(struct syncppp *ap); static void ppp_sync_flush_output(struct syncppp *ap); static void ppp_sync_input(struct syncppp *ap, const unsigned char *buf, - char *flags, int count); + const char *flags, int count); static const struct ppp_channel_ops sync_ops = { .start_xmit = ppp_sync_send, @@ -333,7 +333,7 @@ ppp_sync_poll(struct tty_struct *tty, struct file *file, poll_table *wait) /* May sleep, don't call from interrupt level or with interrupts disabled */ static void ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf, - char *cflags, int count) + const char *cflags, int count) { struct syncppp *ap = sp_get(tty); unsigned long flags; @@ -365,6 +365,7 @@ ppp_sync_wakeup(struct tty_struct *tty) static struct tty_ldisc_ops ppp_sync_ldisc = { .owner = THIS_MODULE, + .num = N_SYNC_PPP, .name = "pppsync", .open = ppp_sync_open, .close = ppp_sync_close, @@ -382,7 +383,7 @@ ppp_sync_init(void) { int err; - err = tty_register_ldisc(N_SYNC_PPP, &ppp_sync_ldisc); + err = tty_register_ldisc(&ppp_sync_ldisc); if (err != 0) printk(KERN_ERR "PPP_sync: error %d registering line disc.\n", err); @@ -665,7 +666,7 @@ ppp_sync_flush_output(struct syncppp *ap) */ static void ppp_sync_input(struct syncppp *ap, const unsigned char *buf, - char *flags, int count) + const char *flags, int count) { struct sk_buff *skb; unsigned char *p; @@ -726,8 +727,7 @@ err: static void __exit ppp_sync_cleanup(void) { - if (tty_unregister_ldisc(N_SYNC_PPP) != 0) - printk(KERN_ERR "failed to unregister Sync PPP line discipline\n"); + tty_unregister_ldisc(&ppp_sync_ldisc); } module_init(ppp_sync_init); diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 1ab124eba8eb..dc84cb844319 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -685,7 +685,7 @@ static void sl_setup(struct net_device *dev) */ static void slip_receive_buf(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) + const char *fp, int count) { struct slip *sl = tty->disc_data; @@ -1263,6 +1263,7 @@ static int sl_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) static struct tty_ldisc_ops sl_ldisc = { .owner = THIS_MODULE, + .num = N_SLIP, .name = "slip", .open = slip_open, .close = slip_close, @@ -1298,7 +1299,7 @@ static int __init slip_init(void) return -ENOMEM; /* Fill in our line protocol discipline, and register it */ - status = tty_register_ldisc(N_SLIP, &sl_ldisc); + status = tty_register_ldisc(&sl_ldisc); if (status != 0) { printk(KERN_ERR "SLIP: can't register line discipline (err = %d)\n", status); kfree(slip_devs); @@ -1359,9 +1360,7 @@ static void __exit slip_exit(void) kfree(slip_devs); slip_devs = NULL; - i = tty_unregister_ldisc(N_SLIP); - if (i != 0) - printk(KERN_ERR "SLIP: can't unregister line discipline (err = %d)\n", i); + tty_unregister_ldisc(&sl_ldisc); } module_init(slip_init); diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 54ef8492ca01..63006838bdcc 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1356,10 +1356,10 @@ out: } /* how much room is there for writing */ -static int hso_serial_write_room(struct tty_struct *tty) +static unsigned int hso_serial_write_room(struct tty_struct *tty) { struct hso_serial *serial = tty->driver_data; - int room; + unsigned int room; unsigned long flags; spin_lock_irqsave(&serial->serial_lock, flags); @@ -1403,11 +1403,11 @@ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) } /* how many characters in the buffer */ -static int hso_serial_chars_in_buffer(struct tty_struct *tty) +static unsigned int hso_serial_chars_in_buffer(struct tty_struct *tty) { struct hso_serial *serial = tty->driver_data; - int chars; unsigned long flags; + unsigned int chars; /* sanity check */ if (serial == NULL) diff --git a/drivers/pps/clients/pps-ldisc.c b/drivers/pps/clients/pps-ldisc.c index bf26cc56b863..d73c4c2ed4e1 100644 --- a/drivers/pps/clients/pps-ldisc.c +++ b/drivers/pps/clients/pps-ldisc.c @@ -112,12 +112,13 @@ static int __init pps_tty_init(void) /* Init PPS_TTY data */ pps_ldisc_ops.owner = THIS_MODULE; + pps_ldisc_ops.num = N_PPS; pps_ldisc_ops.name = "pps_tty"; pps_ldisc_ops.dcd_change = pps_tty_dcd_change; pps_ldisc_ops.open = pps_tty_open; pps_ldisc_ops.close = pps_tty_close; - err = tty_register_ldisc(N_PPS, &pps_ldisc_ops); + err = tty_register_ldisc(&pps_ldisc_ops); if (err) pr_err("can't register PPS line discipline\n"); else @@ -128,13 +129,7 @@ static int __init pps_tty_init(void) static void __exit pps_tty_cleanup(void) { - int err; - - err = tty_unregister_ldisc(N_PPS); - if (err) - pr_err("can't unregister PPS line discipline\n"); - else - pr_info("PPS line discipline removed\n"); + tty_unregister_ldisc(&pps_ldisc_ops); } module_init(pps_tty_init); diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 02523f4e29f4..67c0009ca545 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -925,7 +925,7 @@ static void tty3215_close(struct tty_struct *tty, struct file * filp) /* * Returns the amount of free space in the output buffer. */ -static int tty3215_write_room(struct tty_struct *tty) +static unsigned int tty3215_write_room(struct tty_struct *tty) { struct raw3215_info *raw = tty->driver_data; @@ -981,7 +981,7 @@ static void tty3215_flush_chars(struct tty_struct *tty) /* * Returns the number of characters in the output buffer */ -static int tty3215_chars_in_buffer(struct tty_struct *tty) +static unsigned int tty3215_chars_in_buffer(struct tty_struct *tty) { struct raw3215_info *raw = tty->driver_data; diff --git a/drivers/s390/char/sclp_rw.c b/drivers/s390/char/sclp_rw.c index de44c15fe03a..1690326553b1 100644 --- a/drivers/s390/char/sclp_rw.c +++ b/drivers/s390/char/sclp_rw.c @@ -318,10 +318,10 @@ sclp_buffer_space(struct sclp_buffer *buffer) /* * Return number of characters in buffer */ -int +unsigned int sclp_chars_in_buffer(struct sclp_buffer *buffer) { - int count; + unsigned int count; count = buffer->char_sum; if (buffer->current_line != NULL) diff --git a/drivers/s390/char/sclp_rw.h b/drivers/s390/char/sclp_rw.h index a9127489f224..9b779ee4f979 100644 --- a/drivers/s390/char/sclp_rw.h +++ b/drivers/s390/char/sclp_rw.h @@ -86,6 +86,6 @@ void *sclp_unmake_buffer(struct sclp_buffer *); int sclp_buffer_space(struct sclp_buffer *); int sclp_write(struct sclp_buffer *buffer, const unsigned char *, int); int sclp_emit_buffer(struct sclp_buffer *,void (*)(struct sclp_buffer *,int)); -int sclp_chars_in_buffer(struct sclp_buffer *); +unsigned int sclp_chars_in_buffer(struct sclp_buffer *); #endif /* __SCLP_RW_H__ */ diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c index f5591bf82a8f..6be9de8ed37d 100644 --- a/drivers/s390/char/sclp_tty.c +++ b/drivers/s390/char/sclp_tty.c @@ -86,12 +86,12 @@ sclp_tty_close(struct tty_struct *tty, struct file *filp) * a string of newlines. Every newline creates a new message which * needs 82 bytes. */ -static int +static unsigned int sclp_tty_write_room (struct tty_struct *tty) { unsigned long flags; struct list_head *l; - int count; + unsigned int count; spin_lock_irqsave(&sclp_tty_lock, flags); count = 0; @@ -280,15 +280,14 @@ sclp_tty_flush_chars(struct tty_struct *tty) * characters in the write buffer (will not be written as long as there is a * final line feed missing). */ -static int +static unsigned int sclp_tty_chars_in_buffer(struct tty_struct *tty) { unsigned long flags; struct sclp_buffer *t; - int count; + unsigned int count = 0; spin_lock_irqsave(&sclp_tty_lock, flags); - count = 0; if (sclp_ttybuf != NULL) count = sclp_chars_in_buffer(sclp_ttybuf); list_for_each_entry(t, &sclp_tty_outqueue, list) { diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index fa40057fd18d..da2496306c04 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -604,12 +604,12 @@ sclp_vt220_flush_chars(struct tty_struct *tty) * to change as output buffers get emptied, or if the output flow * control is acted. */ -static int +static unsigned int sclp_vt220_write_room(struct tty_struct *tty) { unsigned long flags; struct list_head *l; - int count; + unsigned int count; spin_lock_irqsave(&sclp_vt220_lock, flags); count = 0; @@ -624,16 +624,15 @@ sclp_vt220_write_room(struct tty_struct *tty) /* * Return number of buffered chars. */ -static int +static unsigned int sclp_vt220_chars_in_buffer(struct tty_struct *tty) { unsigned long flags; struct list_head *l; struct sclp_vt220_request *r; - int count; + unsigned int count = 0; spin_lock_irqsave(&sclp_vt220_lock, flags); - count = 0; if (sclp_vt220_current_request != NULL) count = sclp_vt220_chars_stored(sclp_vt220_current_request); list_for_each(l, &sclp_vt220_outqueue) { diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index 307a80f85c07..adc33846bf8e 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -1071,7 +1071,7 @@ static void tty3270_cleanup(struct tty_struct *tty) /* * We always have room. */ -static int +static unsigned int tty3270_write_room(struct tty_struct *tty) { return INT_MAX; @@ -1640,7 +1640,7 @@ tty3270_do_write(struct tty3270 *tp, struct tty_struct *tty, int i_msg, i; spin_lock_bh(&tp->view.lock); - for (i_msg = 0; !tty->stopped && i_msg < count; i_msg++) { + for (i_msg = 0; !tty->flow.stopped && i_msg < count; i_msg++) { if (tp->esc_state != 0) { /* Continue escape sequence. */ tty3270_escape_sequence(tp, buf[i_msg]); @@ -1756,22 +1756,6 @@ tty3270_flush_chars(struct tty_struct *tty) } } -/* - * Returns the number of characters in the output buffer. This is - * used in tty_wait_until_sent to wait until all characters have - * appeared on the screen. - */ -static int -tty3270_chars_in_buffer(struct tty_struct *tty) -{ - return 0; -} - -static void -tty3270_flush_buffer(struct tty_struct *tty) -{ -} - /* * Check for visible/invisible input switches */ @@ -1892,8 +1876,6 @@ static const struct tty_operations tty3270_ops = { .put_char = tty3270_put_char, .flush_chars = tty3270_flush_chars, .write_room = tty3270_write_room, - .chars_in_buffer = tty3270_chars_in_buffer, - .flush_buffer = tty3270_flush_buffer, .throttle = tty3270_throttle, .unthrottle = tty3270_unthrottle, .hangup = tty3270_hangup, diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c index 9ade8e7a68ba..38a280e876c2 100644 --- a/drivers/staging/fwserial/fwserial.c +++ b/drivers/staging/fwserial/fwserial.c @@ -721,7 +721,7 @@ static int fwtty_tx(struct fwtty_port *port, bool drain) /* try to write as many dma transactions out as possible */ n = -EAGAIN; - while (!tty->stopped && !tty->hw_stopped && + while (!tty->flow.stopped && !tty->hw_stopped && !test_bit(STOP_TX, &port->flags)) { txn = kmem_cache_alloc(fwtty_txn_cache, GFP_ATOMIC); if (!txn) { @@ -1112,30 +1112,30 @@ static int fwtty_write(struct tty_struct *tty, const unsigned char *buf, int c) return (n < 0) ? 0 : n; } -static int fwtty_write_room(struct tty_struct *tty) +static unsigned int fwtty_write_room(struct tty_struct *tty) { struct fwtty_port *port = tty->driver_data; - int n; + unsigned int n; spin_lock_bh(&port->lock); n = dma_fifo_avail(&port->tx_fifo); spin_unlock_bh(&port->lock); - fwtty_dbg(port, "%d\n", n); + fwtty_dbg(port, "%u\n", n); return n; } -static int fwtty_chars_in_buffer(struct tty_struct *tty) +static unsigned int fwtty_chars_in_buffer(struct tty_struct *tty) { struct fwtty_port *port = tty->driver_data; - int n; + unsigned int n; spin_lock_bh(&port->lock); n = dma_fifo_level(&port->tx_fifo); spin_unlock_bh(&port->lock); - fwtty_dbg(port, "%d\n", n); + fwtty_dbg(port, "%u\n", n); return n; } diff --git a/drivers/staging/gdm724x/gdm_tty.c b/drivers/staging/gdm724x/gdm_tty.c index 0ccc8c24e754..279de2cd9c4a 100644 --- a/drivers/staging/gdm724x/gdm_tty.c +++ b/drivers/staging/gdm724x/gdm_tty.c @@ -183,7 +183,7 @@ static int gdm_tty_write(struct tty_struct *tty, const unsigned char *buf, return len; } -static int gdm_tty_write_room(struct tty_struct *tty) +static unsigned int gdm_tty_write_room(struct tty_struct *tty) { struct gdm *gdm = tty->driver_data; diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c index b1e63f7798b0..73f01ed1e5b7 100644 --- a/drivers/staging/greybus/uart.c +++ b/drivers/staging/greybus/uart.c @@ -440,7 +440,7 @@ static int gb_tty_write(struct tty_struct *tty, const unsigned char *buf, return count; } -static int gb_tty_write_room(struct tty_struct *tty) +static unsigned int gb_tty_write_room(struct tty_struct *tty) { struct gb_tty *gb_tty = tty->driver_data; unsigned long flags; @@ -457,11 +457,11 @@ static int gb_tty_write_room(struct tty_struct *tty) return room; } -static int gb_tty_chars_in_buffer(struct tty_struct *tty) +static unsigned int gb_tty_chars_in_buffer(struct tty_struct *tty) { struct gb_tty *gb_tty = tty->driver_data; unsigned long flags; - int chars; + unsigned int chars; spin_lock_irqsave(&gb_tty->write_lock, flags); chars = kfifo_len(&gb_tty->write_fifo); @@ -494,21 +494,7 @@ static void gb_tty_set_termios(struct tty_struct *tty, (termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; - switch (termios->c_cflag & CSIZE) { - case CS5: - newline.data_bits = 5; - break; - case CS6: - newline.data_bits = 6; - break; - case CS7: - newline.data_bits = 7; - break; - case CS8: - default: - newline.data_bits = 8; - break; - } + newline.data_bits = tty_get_char_size(termios->c_cflag); /* FIXME: needs to clear unsupported bits in the termios */ gb_tty->clocal = ((termios->c_cflag & CLOCAL) != 0); diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index f6a7fd6d3bb6..476c11278235 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -204,7 +204,7 @@ config MOXA_INTELLIO config MOXA_SMARTIO tristate "Moxa SmartIO support v. 2.0" - depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) + depends on SERIAL_NONSTANDARD && PCI help Say Y here if you have a Moxa SmartIO multiport serial card and/or want to help develop a new version of this driver. diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index c7054f5117c3..a2bd75fbaaa4 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_AUDIT) += tty_audit.o obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o obj-$(CONFIG_N_HDLC) += n_hdlc.o obj-$(CONFIG_N_GSM) += n_gsm.o -obj-$(CONFIG_R3964) += n_r3964.o obj-y += vt/ obj-$(CONFIG_HVC_DRIVER) += hvc/ diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index ca48ce5a0862..5ec19c48fb7a 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -148,7 +148,7 @@ static __inline__ void rtsdtr_ctrl(int bits) * ------------------------------------------------------------ * rs_stop() and rs_start() * - * This routines are called before setting or resetting tty->stopped. + * This routines are called before setting or resetting tty->flow.stopped. * They enable or disable transmitter interrupts, as necessary. * ------------------------------------------------------------ */ @@ -309,7 +309,7 @@ static void transmit_chars(struct serial_state *info) return; } if (info->xmit.head == info->xmit.tail - || info->tport.tty->stopped + || info->tport.tty->flow.stopped || info->tport.tty->hw_stopped) { info->IER &= ~UART_IER_THRI; custom.intena = IF_TBE; @@ -768,7 +768,7 @@ static void rs_flush_chars(struct tty_struct *tty) unsigned long flags; if (info->xmit.head == info->xmit.tail - || tty->stopped + || tty->flow.stopped || tty->hw_stopped || !info->xmit.buf) return; @@ -812,7 +812,7 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count local_irq_restore(flags); if (info->xmit.head != info->xmit.tail - && !tty->stopped + && !tty->flow.stopped && !tty->hw_stopped && !(info->IER & UART_IER_THRI)) { info->IER |= UART_IER_THRI; @@ -827,14 +827,14 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count return ret; } -static int rs_write_room(struct tty_struct *tty) +static unsigned int rs_write_room(struct tty_struct *tty) { struct serial_state *info = tty->driver_data; return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); } -static int rs_chars_in_buffer(struct tty_struct *tty) +static unsigned int rs_chars_in_buffer(struct tty_struct *tty) { struct serial_state *info = tty->driver_data; diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 3c6dd06ec5fb..445e5ff9b36d 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -536,11 +536,11 @@ static void ehv_bc_tty_close(struct tty_struct *ttys, struct file *filp) * how much write room the driver can guarantee will be sent OR BUFFERED. This * driver MUST honor the return value. */ -static int ehv_bc_tty_write_room(struct tty_struct *ttys) +static unsigned int ehv_bc_tty_write_room(struct tty_struct *ttys) { struct ehv_bc_data *bc = ttys->driver_data; unsigned long flags; - int count; + unsigned int count; spin_lock_irqsave(&bc->lock, flags); count = CIRC_SPACE(bc->head, bc->tail, BUF_SIZE); diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c index cd23a4b05c8f..ccb683a6e6f5 100644 --- a/drivers/tty/goldfish.c +++ b/drivers/tty/goldfish.c @@ -193,12 +193,12 @@ static int goldfish_tty_write(struct tty_struct *tty, const unsigned char *buf, return count; } -static int goldfish_tty_write_room(struct tty_struct *tty) +static unsigned int goldfish_tty_write_room(struct tty_struct *tty) { return 0x10000; } -static int goldfish_tty_chars_in_buffer(struct tty_struct *tty) +static unsigned int goldfish_tty_chars_in_buffer(struct tty_struct *tty) { struct goldfish_tty *qtty = &goldfish_ttys[tty->index]; void __iomem *base = qtty->base; diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index cdcc64ea2554..5bb8c4e44961 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -292,7 +292,7 @@ int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops) if (vtermnos[index] != -1) return -1; - /* make sure no no tty has been registered in this index */ + /* make sure no tty has been registered in this index */ hp = hvc_get_by_index(index); if (hp) { tty_port_put(&hp->port); @@ -586,7 +586,7 @@ static void hvc_set_winsz(struct work_struct *work) * how much write room the driver can guarantee will be sent OR BUFFERED. This * driver MUST honor the return value. */ -static int hvc_write_room(struct tty_struct *tty) +static unsigned int hvc_write_room(struct tty_struct *tty) { struct hvc_struct *hp = tty->driver_data; @@ -596,7 +596,7 @@ static int hvc_write_room(struct tty_struct *tty) return hp->outbuf_size - hp->n_outbuf; } -static int hvc_chars_in_buffer(struct tty_struct *tty) +static unsigned int hvc_chars_in_buffer(struct tty_struct *tty) { struct hvc_struct *hp = tty->driver_data; @@ -620,7 +620,7 @@ static u32 timeout = MIN_TIMEOUT; /* * Maximum number of bytes to get from the console driver if hvc_poll is * called from driver (and can't sleep). Any more than this and we break - * and start polling with khvcd. This value was derived from from an OpenBMC + * and start polling with khvcd. This value was derived from an OpenBMC * console with the OPAL driver that results in about 0.25ms interrupts off * latency. */ diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c index 297fa7b38b65..82a76cac94de 100644 --- a/drivers/tty/hvc/hvc_iucv.c +++ b/drivers/tty/hvc/hvc_iucv.c @@ -438,8 +438,6 @@ static void hvc_iucv_sndbuf_work(struct work_struct *work) struct hvc_iucv_private *priv; priv = container_of(work, struct hvc_iucv_private, sndbuf_work.work); - if (!priv) - return; spin_lock_bh(&priv->lock); hvc_iucv_send(priv); diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index 197988c55e0c..fe5e6b4f43de 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -1376,7 +1376,7 @@ static int hvcs_write(struct tty_struct *tty, * absolutely WILL BUFFER if we can't send it. This driver MUST honor the * return value, hence the reason for hvcs_struct buffering. */ -static int hvcs_write_room(struct tty_struct *tty) +static unsigned int hvcs_write_room(struct tty_struct *tty) { struct hvcs_struct *hvcsd = tty->driver_data; @@ -1386,7 +1386,7 @@ static int hvcs_write_room(struct tty_struct *tty) return HVCS_BUFF_LEN - hvcsd->chars_in_buffer; } -static int hvcs_chars_in_buffer(struct tty_struct *tty) +static unsigned int hvcs_chars_in_buffer(struct tty_struct *tty) { struct hvcs_struct *hvcsd = tty->driver_data; diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index e8c58f9bd263..bfc15279d5bc 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -890,14 +890,14 @@ out: spin_unlock_irqrestore(&hp->lock, flags); } -static int hvsi_write_room(struct tty_struct *tty) +static unsigned int hvsi_write_room(struct tty_struct *tty) { struct hvsi_struct *hp = tty->driver_data; return N_OUTBUF - hp->n_outbuf; } -static int hvsi_chars_in_buffer(struct tty_struct *tty) +static unsigned int hvsi_chars_in_buffer(struct tty_struct *tty) { struct hvsi_struct *hp = tty->driver_data; @@ -929,7 +929,7 @@ static int hvsi_write(struct tty_struct *tty, * will see there is no room in outbuf and return. */ while ((count > 0) && (hvsi_write_room(tty) > 0)) { - int chunksize = min(count, hvsi_write_room(tty)); + int chunksize = min_t(int, count, hvsi_write_room(tty)); BUG_ON(hp->n_outbuf < 0); memcpy(hp->outbuf + hp->n_outbuf, source, chunksize); diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c index 99bb2f149ff5..e3a5a5ba752c 100644 --- a/drivers/tty/ipwireless/tty.c +++ b/drivers/tty/ipwireless/tty.c @@ -54,7 +54,6 @@ struct ipw_tty { unsigned int control_lines; struct mutex ipw_tty_mutex; int tx_bytes_queued; - int closing; }; static struct ipw_tty *ttys[IPWIRELESS_PCMCIA_MINORS]; @@ -228,7 +227,7 @@ static int ipw_write(struct tty_struct *linux_tty, return count; } -static int ipw_write_room(struct tty_struct *linux_tty) +static unsigned int ipw_write_room(struct tty_struct *linux_tty) { struct ipw_tty *tty = linux_tty->driver_data; int room; @@ -270,7 +269,7 @@ static int ipwireless_set_serial_info(struct tty_struct *linux_tty, return 0; /* Keeps the PCMCIA scripts happy. */ } -static int ipw_chars_in_buffer(struct tty_struct *linux_tty) +static unsigned int ipw_chars_in_buffer(struct tty_struct *linux_tty) { struct ipw_tty *tty = linux_tty->driver_data; @@ -525,7 +524,6 @@ void ipwireless_tty_free(struct ipw_tty *tty) printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": deregistering %s device ttyIPWp%d\n", tty_type_name(ttyj->tty_type), j); - ttyj->closing = 1; if (ttyj->port.tty != NULL) { mutex_unlock(&ttyj->ipw_tty_mutex); tty_vhangup(ttyj->port.tty); diff --git a/drivers/tty/mips_ejtag_fdc.c b/drivers/tty/mips_ejtag_fdc.c index a8e19b4833bf..3b5915b94fac 100644 --- a/drivers/tty/mips_ejtag_fdc.c +++ b/drivers/tty/mips_ejtag_fdc.c @@ -840,11 +840,11 @@ static int mips_ejtag_fdc_tty_write(struct tty_struct *tty, return total; } -static int mips_ejtag_fdc_tty_write_room(struct tty_struct *tty) +static unsigned int mips_ejtag_fdc_tty_write_room(struct tty_struct *tty) { struct mips_ejtag_fdc_tty_port *dport = tty->driver_data; struct mips_ejtag_fdc_tty *priv = dport->driver; - int room; + unsigned int room; /* Report the space in the xmit buffer */ spin_lock(&dport->xmit_lock); @@ -854,10 +854,10 @@ static int mips_ejtag_fdc_tty_write_room(struct tty_struct *tty) return room; } -static int mips_ejtag_fdc_tty_chars_in_buffer(struct tty_struct *tty) +static unsigned int mips_ejtag_fdc_tty_chars_in_buffer(struct tty_struct *tty) { struct mips_ejtag_fdc_tty_port *dport = tty->driver_data; - int chars; + unsigned int chars; /* Report the number of bytes in the xmit buffer */ spin_lock(&dport->xmit_lock); diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index 4d4f15b5cd29..64b18177c790 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -188,9 +188,9 @@ module_param(ttymajor, int, 0); static int moxa_open(struct tty_struct *, struct file *); static void moxa_close(struct tty_struct *, struct file *); static int moxa_write(struct tty_struct *, const unsigned char *, int); -static int moxa_write_room(struct tty_struct *); +static unsigned int moxa_write_room(struct tty_struct *); static void moxa_flush_buffer(struct tty_struct *); -static int moxa_chars_in_buffer(struct tty_struct *); +static unsigned int moxa_chars_in_buffer(struct tty_struct *); static void moxa_set_termios(struct tty_struct *, struct ktermios *); static void moxa_stop(struct tty_struct *); static void moxa_start(struct tty_struct *); @@ -216,9 +216,9 @@ static int MoxaPortLineStatus(struct moxa_port *); static void MoxaPortFlushData(struct moxa_port *, int); static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int); static int MoxaPortReadData(struct moxa_port *); -static int MoxaPortTxQueue(struct moxa_port *); +static unsigned int MoxaPortTxQueue(struct moxa_port *); static int MoxaPortRxQueue(struct moxa_port *); -static int MoxaPortTxFree(struct moxa_port *); +static unsigned int MoxaPortTxFree(struct moxa_port *); static void MoxaPortTxDisable(struct moxa_port *); static void MoxaPortTxEnable(struct moxa_port *); static int moxa_get_serial_info(struct tty_struct *, struct serial_struct *); @@ -1217,11 +1217,11 @@ static int moxa_write(struct tty_struct *tty, return len; } -static int moxa_write_room(struct tty_struct *tty) +static unsigned int moxa_write_room(struct tty_struct *tty) { struct moxa_port *ch; - if (tty->stopped) + if (tty->flow.stopped) return 0; ch = tty->driver_data; if (ch == NULL) @@ -1239,10 +1239,10 @@ static void moxa_flush_buffer(struct tty_struct *tty) tty_wakeup(tty); } -static int moxa_chars_in_buffer(struct tty_struct *tty) +static unsigned int moxa_chars_in_buffer(struct tty_struct *tty) { struct moxa_port *ch = tty->driver_data; - int chars; + unsigned int chars; chars = MoxaPortTxQueue(ch); if (chars) @@ -1374,7 +1374,7 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle, clear_bit(EMPTYWAIT, &p->statusflags); tty_wakeup(tty); } - if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped && + if (test_bit(LOWWAIT, &p->statusflags) && !tty->flow.stopped && MoxaPortTxQueue(p) <= WAKEUP_CHARS) { clear_bit(LOWWAIT, &p->statusflags); tty_wakeup(tty); @@ -1981,7 +1981,7 @@ static int MoxaPortReadData(struct moxa_port *port) } -static int MoxaPortTxQueue(struct moxa_port *port) +static unsigned int MoxaPortTxQueue(struct moxa_port *port) { void __iomem *ofsAddr = port->tableAddr; u16 rptr, wptr, mask; @@ -1992,7 +1992,7 @@ static int MoxaPortTxQueue(struct moxa_port *port) return (wptr - rptr) & mask; } -static int MoxaPortTxFree(struct moxa_port *port) +static unsigned int MoxaPortTxFree(struct moxa_port *port) { void __iomem *ofsAddr = port->tableAddr; u16 rptr, wptr, mask; diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 16a852ecbe8a..900ccb2ca166 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -41,9 +41,112 @@ #include #include -#include "mxser.h" +/* + * Semi-public control interfaces + */ + +/* + * MOXA ioctls + */ + +#define MOXA 0x400 +#define MOXA_SET_OP_MODE (MOXA + 66) +#define MOXA_GET_OP_MODE (MOXA + 67) + +#define RS232_MODE 0 +#define RS485_2WIRE_MODE 1 +#define RS422_MODE 2 +#define RS485_4WIRE_MODE 3 +#define OP_MODE_MASK 3 + +/* --------------------------------------------------- */ + +/* + * Follow just what Moxa Must chip defines. + * + * When LCR register (offset 0x03) is written the following value, the Must chip + * will enter enhanced mode. And a write to EFR (offset 0x02) bit 6,7 will + * change bank. + */ +#define MOXA_MUST_ENTER_ENHANCED 0xBF + +/* when enhanced mode is enabled, access to general bank register */ +#define MOXA_MUST_GDL_REGISTER 0x07 +#define MOXA_MUST_GDL_MASK 0x7F +#define MOXA_MUST_GDL_HAS_BAD_DATA 0x80 + +#define MOXA_MUST_LSR_RERR 0x80 /* error in receive FIFO */ +/* enhanced register bank select and enhanced mode setting register */ +/* This works only when LCR register equals to 0xBF */ +#define MOXA_MUST_EFR_REGISTER 0x02 +#define MOXA_MUST_EFR_EFRB_ENABLE 0x10 /* enhanced mode enable */ +/* enhanced register bank set 0, 1, 2 */ +#define MOXA_MUST_EFR_BANK0 0x00 +#define MOXA_MUST_EFR_BANK1 0x40 +#define MOXA_MUST_EFR_BANK2 0x80 +#define MOXA_MUST_EFR_BANK3 0xC0 +#define MOXA_MUST_EFR_BANK_MASK 0xC0 + +/* set XON1 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XON1_REGISTER 0x04 + +/* set XON2 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XON2_REGISTER 0x05 + +/* set XOFF1 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XOFF1_REGISTER 0x06 + +/* set XOFF2 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XOFF2_REGISTER 0x07 + +#define MOXA_MUST_RBRTL_REGISTER 0x04 +#define MOXA_MUST_RBRTH_REGISTER 0x05 +#define MOXA_MUST_RBRTI_REGISTER 0x06 +#define MOXA_MUST_THRTL_REGISTER 0x07 +#define MOXA_MUST_ENUM_REGISTER 0x04 +#define MOXA_MUST_HWID_REGISTER 0x05 +#define MOXA_MUST_ECR_REGISTER 0x06 +#define MOXA_MUST_CSR_REGISTER 0x07 + +#define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20 /* good data mode enable */ +#define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10 /* only good data put into RxFIFO */ + +#define MOXA_MUST_IER_ECTSI 0x80 /* enable CTS interrupt */ +#define MOXA_MUST_IER_ERTSI 0x40 /* enable RTS interrupt */ +#define MOXA_MUST_IER_XINT 0x20 /* enable Xon/Xoff interrupt */ +#define MOXA_MUST_IER_EGDAI 0x10 /* enable GDA interrupt */ + +#define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI) + +/* GDA interrupt pending */ +#define MOXA_MUST_IIR_GDA 0x1C +#define MOXA_MUST_IIR_RDA 0x04 +#define MOXA_MUST_IIR_RTO 0x0C +#define MOXA_MUST_IIR_LSR 0x06 + +/* received Xon/Xoff or specical interrupt pending */ +#define MOXA_MUST_IIR_XSC 0x10 + +/* RTS/CTS change state interrupt pending */ +#define MOXA_MUST_IIR_RTSCTS 0x20 +#define MOXA_MUST_IIR_MASK 0x3E + +#define MOXA_MUST_MCR_XON_FLAG 0x40 +#define MOXA_MUST_MCR_XON_ANY 0x80 +#define MOXA_MUST_MCR_TX_XON 0x08 + +#define MOXA_MUST_EFR_SF_MASK 0x0F /* software flow control on chip mask value */ +#define MOXA_MUST_EFR_SF_TX1 0x08 /* send Xon1/Xoff1 */ +#define MOXA_MUST_EFR_SF_TX2 0x04 /* send Xon2/Xoff2 */ +#define MOXA_MUST_EFR_SF_TX12 0x0C /* send Xon1,Xon2/Xoff1,Xoff2 */ +#define MOXA_MUST_EFR_SF_TX_NO 0x00 /* don't send Xon/Xoff */ +#define MOXA_MUST_EFR_SF_TX_MASK 0x0C /* Tx software flow control mask */ +#define MOXA_MUST_EFR_SF_RX_NO 0x00 /* don't receive Xon/Xoff */ +#define MOXA_MUST_EFR_SF_RX1 0x02 /* receive Xon1/Xoff1 */ +#define MOXA_MUST_EFR_SF_RX2 0x01 /* receive Xon2/Xoff2 */ +#define MOXA_MUST_EFR_SF_RX12 0x03 /* receive Xon1,Xon2/Xoff1,Xoff2 */ +#define MOXA_MUST_EFR_SF_RX_MASK 0x03 /* Rx software flow control mask */ -#define MXSER_VERSION "2.0.5" /* 1.14 */ #define MXSERMAJOR 174 #define MXSER_BOARDS 4 /* Max. boards */ @@ -51,15 +154,10 @@ #define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) #define MXSER_ISR_PASS_LIMIT 100 -/*CheckIsMoxaMust return value*/ -#define MOXA_OTHER_UART 0x00 -#define MOXA_MUST_MU150_HWID 0x01 -#define MOXA_MUST_MU860_HWID 0x02 - #define WAKEUP_CHARS 256 -#define UART_MCR_AFE 0x20 -#define UART_LSR_SPECIAL 0x1E +#define MXSER_BAUD_BASE 921600 +#define MXSER_CUSTOM_DIVISOR (MXSER_BAUD_BASE * 16) #define PCI_DEVICE_ID_POS104UL 0x1044 #define PCI_DEVICE_ID_CB108 0x1080 @@ -70,151 +168,71 @@ #define PCI_DEVICE_ID_CB134I 0x1341 #define PCI_DEVICE_ID_CP138U 0x1380 +#define MXSER_NPORTS(ddata) ((ddata) & 0xffU) +#define MXSER_HIGHBAUD 0x0100 -#define C168_ASIC_ID 1 -#define C104_ASIC_ID 2 -#define C102_ASIC_ID 0xB -#define CI132_ASIC_ID 4 -#define CI134_ASIC_ID 3 -#define CI104J_ASIC_ID 5 +enum mxser_must_hwid { + MOXA_OTHER_UART = 0x00, + MOXA_MUST_MU150_HWID = 0x01, + MOXA_MUST_MU860_HWID = 0x02, +}; -#define MXSER_HIGHBAUD 1 -#define MXSER_HAS2 2 - -/* This is only for PCI */ static const struct { - int type; - int tx_fifo; - int rx_fifo; - int xmit_fifo_size; - int rx_high_water; - int rx_trigger; - int rx_low_water; - long max_baud; + u8 type; + u8 fifo_size; + u8 rx_high_water; + u8 rx_low_water; + speed_t max_baud; } Gpci_uart_info[] = { - {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, - {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, - {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} + { MOXA_OTHER_UART, 16, 14, 1, 921600 }, + { MOXA_MUST_MU150_HWID, 64, 48, 16, 230400 }, + { MOXA_MUST_MU860_HWID, 128, 96, 32, 921600 } }; #define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info) -struct mxser_cardinfo { - char *name; - unsigned int nports; - unsigned int flags; -}; - -static const struct mxser_cardinfo mxser_cards[] = { -/* 0*/ { "C168 series", 8, }, - { "C104 series", 4, }, - { "CI-104J series", 4, }, - { "C168H/PCI series", 8, }, - { "C104H/PCI series", 4, }, -/* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */ - { "CI-132 series", 4, MXSER_HAS2 }, - { "CI-134 series", 4, }, - { "CP-132 series", 2, }, - { "CP-114 series", 4, }, -/*10*/ { "CT-114 series", 4, }, - { "CP-102 series", 2, MXSER_HIGHBAUD }, - { "CP-104U series", 4, }, - { "CP-168U series", 8, }, - { "CP-132U series", 2, }, -/*15*/ { "CP-134U series", 4, }, - { "CP-104JU series", 4, }, - { "Moxa UC7000 Serial", 8, }, /* RC7000 */ - { "CP-118U series", 8, }, - { "CP-102UL series", 2, }, -/*20*/ { "CP-102U series", 2, }, - { "CP-118EL series", 8, }, - { "CP-168EL series", 8, }, - { "CP-104EL series", 4, }, - { "CB-108 series", 8, }, -/*25*/ { "CB-114 series", 4, }, - { "CB-134I series", 4, }, - { "CP-138U series", 8, }, - { "POS-104UL series", 4, }, - { "CP-114UL series", 4, }, -/*30*/ { "CP-102UF series", 2, }, - { "CP-112UL series", 2, }, -}; /* driver_data correspond to the lines in the structure above see also ISA probe function before you change something */ static const struct pci_device_id mxser_pcibrds[] = { - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 8 }, { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL), .driver_data = 31 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 2 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 2 | MXSER_HIGHBAUD }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 8 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 2 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 8 }, /* RC7000 */ + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 8 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 2 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 2 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 8 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 8 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 8 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 8 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 2 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL), .driver_data = 2 }, { } }; MODULE_DEVICE_TABLE(pci, mxser_pcibrds); -static unsigned long ioaddr[MXSER_BOARDS]; static int ttymajor = MXSERMAJOR; /* Variables for insmod */ MODULE_AUTHOR("Casper Yang"); MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); -module_param_hw_array(ioaddr, ulong, ioport, NULL, 0); -MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board"); module_param(ttymajor, int, 0); MODULE_LICENSE("GPL"); -struct mxser_log { - int tick; - unsigned long rxcnt[MXSER_PORTS]; - unsigned long txcnt[MXSER_PORTS]; -}; - -struct mxser_mon { - unsigned long rxcnt; - unsigned long txcnt; - unsigned long up_rxcnt; - unsigned long up_txcnt; - int modem_status; - unsigned char hold_reason; -}; - -struct mxser_mon_ext { - unsigned long rx_cnt[32]; - unsigned long tx_cnt[32]; - unsigned long up_rxcnt[32]; - unsigned long up_txcnt[32]; - int modem_status[32]; - - long baudrate[32]; - int databits[32]; - int stopbits[32]; - int parity[32]; - int flowctrl[32]; - int fifo[32]; - int iftype[32]; -}; - struct mxser_board; struct mxser_port { @@ -223,274 +241,147 @@ struct mxser_port { unsigned long ioaddr; unsigned long opmode_ioaddr; - int max_baud; - int rx_high_water; - int rx_trigger; /* Rx fifo trigger level */ - int rx_low_water; - int baud_base; /* max. speed */ + u8 rx_high_water; + u8 rx_low_water; int type; /* UART type */ - int x_char; /* xon/xoff character */ - int IER; /* Interrupt Enable Register */ - int MCR; /* Modem control register */ + unsigned char x_char; /* xon/xoff character */ + u8 IER; /* Interrupt Enable Register */ + u8 MCR; /* Modem control register */ - unsigned char stop_rx; unsigned char ldisc_stop_rx; - int custom_divisor; - unsigned char err_shadow; - struct async_icount icount; /* kernel counters for 4 input interrupts */ unsigned int timeout; - int read_status_mask; - int ignore_status_mask; - unsigned int xmit_fifo_size; - int xmit_head; - int xmit_tail; - int xmit_cnt; + u8 read_status_mask; + u8 ignore_status_mask; + u8 xmit_fifo_size; + unsigned int xmit_head; + unsigned int xmit_tail; + unsigned int xmit_cnt; int closing; - struct ktermios normal_termios; - - struct mxser_mon mon_data; - spinlock_t slock; }; struct mxser_board { unsigned int idx; + unsigned short nports; int irq; - const struct mxser_cardinfo *info; unsigned long vector; - unsigned long vector_mask; - int chip_flag; - int uart_type; + enum mxser_must_hwid must_hwid; + speed_t max_baud; - struct mxser_port ports[MXSER_PORTS_PER_BOARD]; + struct mxser_port ports[]; }; -struct mxser_mstatus { - tcflag_t cflag; - int cts; - int dsr; - int ri; - int dcd; -}; - -static struct mxser_board mxser_boards[MXSER_BOARDS]; +static DECLARE_BITMAP(mxser_boards, MXSER_BOARDS); static struct tty_driver *mxvar_sdriver; -static struct mxser_log mxvar_log; -static int mxser_set_baud_method[MXSER_PORTS + 1]; -static void mxser_enable_must_enchance_mode(unsigned long baseio) +static u8 __mxser_must_set_EFR(unsigned long baseio, u8 clear, u8 set, + bool restore_LCR) { - u8 oldlcr; - u8 efr; + u8 oldlcr, efr; oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENHANCED, baseio + UART_LCR); efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr |= MOXA_MUST_EFR_EFRB_ENABLE; + efr &= ~clear; + efr |= set; outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); + + if (restore_LCR) + outb(oldlcr, baseio + UART_LCR); + + return oldlcr; } -#ifdef CONFIG_PCI -static void mxser_disable_must_enchance_mode(unsigned long baseio) +static u8 mxser_must_select_bank(unsigned long baseio, u8 bank) { - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); + return __mxser_must_set_EFR(baseio, MOXA_MUST_EFR_BANK_MASK, bank, + false); } -#endif static void mxser_set_must_xon1_value(unsigned long baseio, u8 value) { - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK0; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK0); outb(value, baseio + MOXA_MUST_XON1_REGISTER); outb(oldlcr, baseio + UART_LCR); } static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value) { - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK0; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK0); outb(value, baseio + MOXA_MUST_XOFF1_REGISTER); outb(oldlcr, baseio + UART_LCR); } static void mxser_set_must_fifo_value(struct mxser_port *info) { - u8 oldlcr; - u8 efr; - - oldlcr = inb(info->ioaddr + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR); - - efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK1; - - outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER); - outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER); - outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER); - outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER); + u8 oldlcr = mxser_must_select_bank(info->ioaddr, MOXA_MUST_EFR_BANK1); + outb(info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER); + outb(info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTI_REGISTER); + outb(info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER); outb(oldlcr, info->ioaddr + UART_LCR); } static void mxser_set_must_enum_value(unsigned long baseio, u8 value) { - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK2; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK2); outb(value, baseio + MOXA_MUST_ENUM_REGISTER); outb(oldlcr, baseio + UART_LCR); } -#ifdef CONFIG_PCI -static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId) +static u8 mxser_get_must_hardware_id(unsigned long baseio) { - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK2; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - *pId = inb(baseio + MOXA_MUST_HWID_REGISTER); + u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK2); + u8 id = inb(baseio + MOXA_MUST_HWID_REGISTER); outb(oldlcr, baseio + UART_LCR); -} -#endif -static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_MASK; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); + return id; } -static void mxser_enable_must_tx_software_flow_control(unsigned long baseio) +static void mxser_must_set_EFR(unsigned long baseio, u8 clear, u8 set) { - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_TX_MASK; - efr |= MOXA_MUST_EFR_SF_TX1; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); + __mxser_must_set_EFR(baseio, clear, set, true); } -static void mxser_disable_must_tx_software_flow_control(unsigned long baseio) +static void mxser_must_set_enhance_mode(unsigned long baseio, bool enable) { - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_TX_MASK; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); + mxser_must_set_EFR(baseio, + enable ? 0 : MOXA_MUST_EFR_EFRB_ENABLE, + enable ? MOXA_MUST_EFR_EFRB_ENABLE : 0); } -static void mxser_enable_must_rx_software_flow_control(unsigned long baseio) +static void mxser_must_no_sw_flow_control(unsigned long baseio) { - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_RX_MASK; - efr |= MOXA_MUST_EFR_SF_RX1; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); + mxser_must_set_EFR(baseio, MOXA_MUST_EFR_SF_MASK, 0); } -static void mxser_disable_must_rx_software_flow_control(unsigned long baseio) +static void mxser_must_set_tx_sw_flow_control(unsigned long baseio, bool enable) { - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_RX_MASK; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); + mxser_must_set_EFR(baseio, MOXA_MUST_EFR_SF_TX_MASK, + enable ? MOXA_MUST_EFR_SF_TX1 : 0); } -#ifdef CONFIG_PCI -static int CheckIsMoxaMust(unsigned long io) +static void mxser_must_set_rx_sw_flow_control(unsigned long baseio, bool enable) +{ + mxser_must_set_EFR(baseio, MOXA_MUST_EFR_SF_RX_MASK, + enable ? MOXA_MUST_EFR_SF_RX1 : 0); +} + +static enum mxser_must_hwid mxser_must_get_hwid(unsigned long io) { u8 oldmcr, hwid; int i; outb(0, io + UART_LCR); - mxser_disable_must_enchance_mode(io); + mxser_must_set_enhance_mode(io, false); oldmcr = inb(io + UART_MCR); outb(0, io + UART_MCR); mxser_set_must_xon1_value(io, 0x11); @@ -499,49 +390,59 @@ static int CheckIsMoxaMust(unsigned long io) return MOXA_OTHER_UART; } - mxser_get_must_hardware_id(io, &hwid); - for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */ + hwid = mxser_get_must_hardware_id(io); + for (i = 1; i < UART_INFO_NUM; i++) /* 0 = OTHER_UART */ if (hwid == Gpci_uart_info[i].type) - return (int)hwid; - } + return hwid; + return MOXA_OTHER_UART; } -#endif -static void process_txrx_fifo(struct mxser_port *info) +static bool mxser_16550A_or_MUST(struct mxser_port *info) { - int i; + return info->type == PORT_16550A || info->board->must_hwid; +} - if ((info->type == PORT_16450) || (info->type == PORT_8250)) { - info->rx_trigger = 1; +static void mxser_process_txrx_fifo(struct mxser_port *info) +{ + unsigned int i; + + if (info->type == PORT_16450 || info->type == PORT_8250) { info->rx_high_water = 1; info->rx_low_water = 1; info->xmit_fifo_size = 1; - } else - for (i = 0; i < UART_INFO_NUM; i++) - if (info->board->chip_flag == Gpci_uart_info[i].type) { - info->rx_trigger = Gpci_uart_info[i].rx_trigger; - info->rx_low_water = Gpci_uart_info[i].rx_low_water; - info->rx_high_water = Gpci_uart_info[i].rx_high_water; - info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; - break; - } + return; + } + + for (i = 0; i < UART_INFO_NUM; i++) + if (info->board->must_hwid == Gpci_uart_info[i].type) { + info->rx_low_water = Gpci_uart_info[i].rx_low_water; + info->rx_high_water = Gpci_uart_info[i].rx_high_water; + info->xmit_fifo_size = Gpci_uart_info[i].fifo_size; + break; + } } -static unsigned char mxser_get_msr(int baseaddr, int mode, int port) +static void __mxser_start_tx(struct mxser_port *info) { - static unsigned char mxser_msr[MXSER_PORTS + 1]; - unsigned char status = 0; + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); +} - status = inb(baseaddr + UART_MSR); +static void mxser_start_tx(struct mxser_port *info) +{ + unsigned long flags; - mxser_msr[port] &= 0x0F; - mxser_msr[port] |= status; - status = mxser_msr[port]; - if (mode) - mxser_msr[port] = 0; + spin_lock_irqsave(&info->slock, flags); + __mxser_start_tx(info); + spin_unlock_irqrestore(&info->slock, flags); +} - return status; +static void __mxser_stop_tx(struct mxser_port *info) +{ + info->IER &= ~UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); } static int mxser_carrier_raised(struct tty_port *port) @@ -554,38 +455,36 @@ static void mxser_dtr_rts(struct tty_port *port, int on) { struct mxser_port *mp = container_of(port, struct mxser_port, port); unsigned long flags; + u8 mcr; spin_lock_irqsave(&mp->slock, flags); + mcr = inb(mp->ioaddr + UART_MCR); if (on) - outb(inb(mp->ioaddr + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + mcr |= UART_MCR_DTR | UART_MCR_RTS; else - outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS), - mp->ioaddr + UART_MCR); + mcr &= ~(UART_MCR_DTR | UART_MCR_RTS); + outb(mcr, mp->ioaddr + UART_MCR); spin_unlock_irqrestore(&mp->slock, flags); } -static int mxser_set_baud(struct tty_struct *tty, long newspd) +static int mxser_set_baud(struct tty_struct *tty, speed_t newspd) { struct mxser_port *info = tty->driver_data; unsigned int quot = 0, baud; unsigned char cval; u64 timeout; - if (!info->ioaddr) - return -1; - - if (newspd > info->max_baud) + if (newspd > info->board->max_baud) return -1; if (newspd == 134) { - quot = 2 * info->baud_base / 269; + quot = 2 * MXSER_BAUD_BASE / 269; tty_encode_baud_rate(tty, 134, 134); } else if (newspd) { - quot = info->baud_base / newspd; + quot = MXSER_BAUD_BASE / newspd; if (quot == 0) quot = 1; - baud = info->baud_base/quot; + baud = MXSER_BAUD_BASE / quot; tty_encode_baud_rate(tty, baud, baud); } else { quot = 0; @@ -596,7 +495,7 @@ static int mxser_set_baud(struct tty_struct *tty, long newspd) * u64 domain */ timeout = (u64)info->xmit_fifo_size * HZ * 10 * quot; - do_div(timeout, info->baud_base); + do_div(timeout, MXSER_BAUD_BASE); info->timeout = timeout + HZ / 50; /* Add .02 seconds of slop */ if (quot) { @@ -618,7 +517,7 @@ static int mxser_set_baud(struct tty_struct *tty, long newspd) #ifdef BOTHER if (C_BAUD(tty) == BOTHER) { - quot = info->baud_base % newspd; + quot = MXSER_BAUD_BASE % newspd; quot *= 8; if (quot % newspd > newspd / 2) { quot /= newspd; @@ -634,6 +533,28 @@ static int mxser_set_baud(struct tty_struct *tty, long newspd) return 0; } +static void mxser_handle_cts(struct tty_struct *tty, struct mxser_port *info, + u8 msr) +{ + bool cts = msr & UART_MSR_CTS; + + if (tty->hw_stopped) { + if (cts) { + tty->hw_stopped = 0; + + if (!mxser_16550A_or_MUST(info)) + __mxser_start_tx(info); + tty_wakeup(tty); + } + return; + } else if (cts) + return; + + tty->hw_stopped = 1; + if (!mxser_16550A_or_MUST(info)) + __mxser_stop_tx(info); +} + /* * This routine is called to set the UART divisor registers to match * the specified baud rate for a serial port. @@ -642,35 +563,30 @@ static void mxser_change_speed(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; unsigned cflag, cval, fcr; - unsigned char status; cflag = tty->termios.c_cflag; - if (!info->ioaddr) - return; - if (mxser_set_baud_method[tty->index] == 0) - mxser_set_baud(tty, tty_get_baud_rate(tty)); + mxser_set_baud(tty, tty_get_baud_rate(tty)); /* byte size and parity */ switch (cflag & CSIZE) { + default: case CS5: - cval = 0x00; + cval = UART_LCR_WLEN5; break; case CS6: - cval = 0x01; + cval = UART_LCR_WLEN6; break; case CS7: - cval = 0x02; + cval = UART_LCR_WLEN7; break; case CS8: - cval = 0x03; + cval = UART_LCR_WLEN8; break; - default: - cval = 0x00; - break; /* too keep GCC shut... */ } + if (cflag & CSTOPB) - cval |= 0x04; + cval |= UART_LCR_STOP; if (cflag & PARENB) cval |= UART_LCR_PARITY; if (!(cflag & PARODD)) @@ -679,7 +595,7 @@ static void mxser_change_speed(struct tty_struct *tty) cval |= UART_LCR_SPAR; if ((info->type == PORT_8250) || (info->type == PORT_16450)) { - if (info->board->chip_flag) { + if (info->board->must_hwid) { fcr = UART_FCR_ENABLE_FIFO; fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; mxser_set_must_fifo_value(info); @@ -687,11 +603,11 @@ static void mxser_change_speed(struct tty_struct *tty) fcr = 0; } else { fcr = UART_FCR_ENABLE_FIFO; - if (info->board->chip_flag) { + if (info->board->must_hwid) { fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; mxser_set_must_fifo_value(info); } else { - switch (info->rx_trigger) { + switch (info->rx_high_water) { case 1: fcr |= UART_FCR_TRIGGER_1; break; @@ -714,35 +630,11 @@ static void mxser_change_speed(struct tty_struct *tty) tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); if (cflag & CRTSCTS) { info->IER |= UART_IER_MSI; - if ((info->type == PORT_16550A) || (info->board->chip_flag)) { + if (mxser_16550A_or_MUST(info)) { info->MCR |= UART_MCR_AFE; } else { - status = inb(info->ioaddr + UART_MSR); - if (tty->hw_stopped) { - if (status & UART_MSR_CTS) { - tty->hw_stopped = 0; - if (info->type != PORT_16550A && - !info->board->chip_flag) { - outb(info->IER & ~UART_IER_THRI, - info->ioaddr + - UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + - UART_IER); - } - tty_wakeup(tty); - } - } else { - if (!(status & UART_MSR_CTS)) { - tty->hw_stopped = 1; - if ((info->type != PORT_16550A) && - (!info->board->chip_flag)) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->ioaddr + - UART_IER); - } - } - } + mxser_handle_cts(tty, info, + inb(info->ioaddr + UART_MSR)); } } outb(info->MCR, info->ioaddr + UART_MCR); @@ -780,23 +672,11 @@ static void mxser_change_speed(struct tty_struct *tty) UART_LSR_FE; } } - if (info->board->chip_flag) { + if (info->board->must_hwid) { mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty)); mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty)); - if (I_IXON(tty)) { - mxser_enable_must_rx_software_flow_control( - info->ioaddr); - } else { - mxser_disable_must_rx_software_flow_control( - info->ioaddr); - } - if (I_IXOFF(tty)) { - mxser_enable_must_tx_software_flow_control( - info->ioaddr); - } else { - mxser_disable_must_tx_software_flow_control( - info->ioaddr); - } + mxser_must_set_rx_sw_flow_control(info->ioaddr, I_IXON(tty)); + mxser_must_set_tx_sw_flow_control(info->ioaddr, I_IXOFF(tty)); } @@ -816,7 +696,6 @@ static void mxser_check_modem_status(struct tty_struct *tty, port->icount.dcd++; if (status & UART_MSR_DCTS) port->icount.cts++; - port->mon_data.modem_status = status; wake_up_interruptible(&port->port.delta_msr_wait); if (tty_port_check_carrier(&port->port) && (status & UART_MSR_DDCD)) { @@ -824,33 +703,8 @@ static void mxser_check_modem_status(struct tty_struct *tty, wake_up_interruptible(&port->port.open_wait); } - if (tty_port_cts_enabled(&port->port)) { - if (tty->hw_stopped) { - if (status & UART_MSR_CTS) { - tty->hw_stopped = 0; - - if ((port->type != PORT_16550A) && - (!port->board->chip_flag)) { - outb(port->IER & ~UART_IER_THRI, - port->ioaddr + UART_IER); - port->IER |= UART_IER_THRI; - outb(port->IER, port->ioaddr + - UART_IER); - } - tty_wakeup(tty); - } - } else { - if (!(status & UART_MSR_CTS)) { - tty->hw_stopped = 1; - if (port->type != PORT_16550A && - !port->board->chip_flag) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + - UART_IER); - } - } - } - } + if (tty_port_cts_enabled(&port->port)) + mxser_handle_cts(tty, port, status); } static int mxser_activate(struct tty_port *port, struct tty_struct *tty) @@ -865,7 +719,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty) spin_lock_irqsave(&info->slock, flags); - if (!info->ioaddr || !info->type) { + if (!info->type) { set_bit(TTY_IO_ERROR, &tty->flags); free_page(page); spin_unlock_irqrestore(&info->slock, flags); @@ -877,7 +731,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty) * Clear the FIFO buffers and disable them * (they will be reenabled in mxser_change_speed()) */ - if (info->board->chip_flag) + if (info->board->must_hwid) outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR); @@ -919,7 +773,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty) */ info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; - if (info->board->chip_flag) + if (info->board->must_hwid) info->IER |= MOXA_MUST_IER_EGDAI; outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */ @@ -971,7 +825,7 @@ static void mxser_shutdown_port(struct tty_port *port) outb(0x00, info->ioaddr + UART_IER); /* clear Rx/Tx FIFO's */ - if (info->board->chip_flag) + if (info->board->must_hwid) outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | MOXA_MUST_FCR_GDA_MODE_ENABLE, info->ioaddr + UART_FCR); @@ -983,8 +837,8 @@ static void mxser_shutdown_port(struct tty_port *port) (void) inb(info->ioaddr + UART_RX); - if (info->board->chip_flag) - SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); + if (info->board->must_hwid) + mxser_must_no_sw_flow_control(info->ioaddr); spin_unlock_irqrestore(&info->slock, flags); } @@ -997,18 +851,12 @@ static void mxser_shutdown_port(struct tty_port *port) */ static int mxser_open(struct tty_struct *tty, struct file *filp) { - struct mxser_port *info; - int line; + struct tty_port *tport = tty->port; + struct mxser_port *port = container_of(tport, struct mxser_port, port); - line = tty->index; - if (line == MXSER_PORTS) - return 0; - info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD]; - if (!info->ioaddr) - return -ENODEV; + tty->driver_data = port; - tty->driver_data = info; - return tty_port_open(&info->port, tty, filp); + return tty_port_open(tport, tty, filp); } static void mxser_flush_buffer(struct tty_struct *tty) @@ -1043,7 +891,7 @@ static void mxser_close_port(struct tty_port *port) * line status register. */ info->IER &= ~UART_IER_RLSI; - if (info->board->chip_flag) + if (info->board->must_hwid) info->IER &= ~MOXA_MUST_RECV_ISR; outb(info->IER, info->ioaddr + UART_IER); @@ -1071,7 +919,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) struct mxser_port *info = tty->driver_data; struct tty_port *port = &info->port; - if (tty->index == MXSER_PORTS || info == NULL) + if (info == NULL) return; if (tty_port_close_start(port, tty, filp) == 0) return; @@ -1118,18 +966,10 @@ static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int cou total += c; } - if (info->xmit_cnt && !tty->stopped) { - if (!tty->hw_stopped || - (info->type == PORT_16550A) || - (info->board->chip_flag)) { - spin_lock_irqsave(&info->slock, flags); - outb(info->IER & ~UART_IER_THRI, info->ioaddr + - UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } + if (info->xmit_cnt && !tty->flow.stopped) + if (!tty->hw_stopped || mxser_16550A_or_MUST(info)) + mxser_start_tx(info); + return total; } @@ -1149,17 +989,7 @@ static int mxser_put_char(struct tty_struct *tty, unsigned char ch) info->xmit_head &= SERIAL_XMIT_SIZE - 1; info->xmit_cnt++; spin_unlock_irqrestore(&info->slock, flags); - if (!tty->stopped) { - if (!tty->hw_stopped || - (info->type == PORT_16550A) || - info->board->chip_flag) { - spin_lock_irqsave(&info->slock, flags); - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } + return 1; } @@ -1167,23 +997,15 @@ static int mxser_put_char(struct tty_struct *tty, unsigned char ch) static void mxser_flush_chars(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; - unsigned long flags; - if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf || - (tty->hw_stopped && info->type != PORT_16550A && - !info->board->chip_flag)) + if (!info->xmit_cnt || tty->flow.stopped || !info->port.xmit_buf || + (tty->hw_stopped && !mxser_16550A_or_MUST(info))) return; - spin_lock_irqsave(&info->slock, flags); - - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - - spin_unlock_irqrestore(&info->slock, flags); + mxser_start_tx(info); } -static int mxser_write_room(struct tty_struct *tty) +static unsigned int mxser_write_room(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; int ret; @@ -1192,7 +1014,7 @@ static int mxser_write_room(struct tty_struct *tty) return ret < 0 ? 0 : ret; } -static int mxser_chars_in_buffer(struct tty_struct *tty) +static unsigned int mxser_chars_in_buffer(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; return info->xmit_cnt; @@ -1210,9 +1032,6 @@ static int mxser_get_serial_info(struct tty_struct *tty, struct tty_port *port = &info->port; unsigned int closing_wait, close_delay; - if (tty->index == MXSER_PORTS) - return -ENOTTY; - mutex_lock(&port->mutex); close_delay = jiffies_to_msecs(info->port.close_delay) / 10; @@ -1225,10 +1044,10 @@ static int mxser_get_serial_info(struct tty_struct *tty, ss->port = info->ioaddr, ss->irq = info->board->irq, ss->flags = info->port.flags, - ss->baud_base = info->baud_base, + ss->baud_base = MXSER_BAUD_BASE, ss->close_delay = close_delay; ss->closing_wait = closing_wait; - ss->custom_divisor = info->custom_divisor, + ss->custom_divisor = MXSER_CUSTOM_DIVISOR, mutex_unlock(&port->mutex); return 0; } @@ -1240,19 +1059,13 @@ static int mxser_set_serial_info(struct tty_struct *tty, struct tty_port *port = &info->port; speed_t baud; unsigned long sl_flags; - unsigned int flags, close_delay, closing_wait; + unsigned int old_speed, close_delay, closing_wait; int retval = 0; - if (tty->index == MXSER_PORTS) - return -ENOTTY; if (tty_io_error(tty)) return -EIO; mutex_lock(&port->mutex); - if (!info->ioaddr) { - mutex_unlock(&port->mutex); - return -ENODEV; - } if (ss->irq != info->board->irq || ss->port != info->ioaddr) { @@ -1260,7 +1073,7 @@ static int mxser_set_serial_info(struct tty_struct *tty, return -EINVAL; } - flags = port->flags & ASYNC_SPD_MASK; + old_speed = port->flags & ASYNC_SPD_MASK; close_delay = msecs_to_jiffies(ss->close_delay * 10); closing_wait = ss->closing_wait; @@ -1268,15 +1081,15 @@ static int mxser_set_serial_info(struct tty_struct *tty, closing_wait = msecs_to_jiffies(closing_wait * 10); if (!capable(CAP_SYS_ADMIN)) { - if ((ss->baud_base != info->baud_base) || - (close_delay != info->port.close_delay) || - (closing_wait != info->port.closing_wait) || - ((ss->flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) { + if ((ss->baud_base != MXSER_BAUD_BASE) || + (close_delay != port->close_delay) || + (closing_wait != port->closing_wait) || + ((ss->flags & ~ASYNC_USR_MASK) != (port->flags & ~ASYNC_USR_MASK))) { mutex_unlock(&port->mutex); return -EPERM; } - info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) | - (ss->flags & ASYNC_USR_MASK)); + port->flags = (port->flags & ~ASYNC_USR_MASK) | + (ss->flags & ASYNC_USR_MASK); } else { /* * OK, past this point, all the error checking has been done. @@ -1287,9 +1100,9 @@ static int mxser_set_serial_info(struct tty_struct *tty, port->close_delay = close_delay; port->closing_wait = closing_wait; if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && - (ss->baud_base != info->baud_base || + (ss->baud_base != MXSER_BAUD_BASE || ss->custom_divisor != - info->custom_divisor)) { + MXSER_CUSTOM_DIVISOR)) { if (ss->custom_divisor == 0) { mutex_unlock(&port->mutex); return -EINVAL; @@ -1300,11 +1113,11 @@ static int mxser_set_serial_info(struct tty_struct *tty, info->type = ss->type; - process_txrx_fifo(info); + mxser_process_txrx_fifo(info); } if (tty_port_initialized(port)) { - if (flags != (port->flags & ASYNC_SPD_MASK)) { + if (old_speed != (port->flags & ASYNC_SPD_MASK)) { spin_lock_irqsave(&info->slock, sl_flags); mxser_change_speed(tty); spin_unlock_irqrestore(&info->slock, sl_flags); @@ -1348,19 +1161,16 @@ static int mxser_tiocmget(struct tty_struct *tty) unsigned char control, status; unsigned long flags; - - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; if (tty_io_error(tty)) return -EIO; - control = info->MCR; - spin_lock_irqsave(&info->slock, flags); + control = info->MCR; status = inb(info->ioaddr + UART_MSR); if (status & UART_MSR_ANY_DELTA) mxser_check_modem_status(tty, info, status); spin_unlock_irqrestore(&info->slock, flags); + return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | @@ -1375,9 +1185,6 @@ static int mxser_tiocmset(struct tty_struct *tty, struct mxser_port *info = tty->driver_data; unsigned long flags; - - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; if (tty_io_error(tty)) return -EIO; @@ -1398,267 +1205,6 @@ static int mxser_tiocmset(struct tty_struct *tty, return 0; } -static int __init mxser_program_mode(int port) -{ - int id, i, j, n; - - outb(0, port); - outb(0, port); - outb(0, port); - (void)inb(port); - (void)inb(port); - outb(0, port); - (void)inb(port); - - id = inb(port + 1) & 0x1F; - if ((id != C168_ASIC_ID) && - (id != C104_ASIC_ID) && - (id != C102_ASIC_ID) && - (id != CI132_ASIC_ID) && - (id != CI134_ASIC_ID) && - (id != CI104J_ASIC_ID)) - return -1; - for (i = 0, j = 0; i < 4; i++) { - n = inb(port + 2); - if (n == 'M') { - j = 1; - } else if ((j == 1) && (n == 1)) { - j = 2; - break; - } else - j = 0; - } - if (j != 2) - id = -2; - return id; -} - -static void __init mxser_normal_mode(int port) -{ - int i, n; - - outb(0xA5, port + 1); - outb(0x80, port + 3); - outb(12, port + 0); /* 9600 bps */ - outb(0, port + 1); - outb(0x03, port + 3); /* 8 data bits */ - outb(0x13, port + 4); /* loop back mode */ - for (i = 0; i < 16; i++) { - n = inb(port + 5); - if ((n & 0x61) == 0x60) - break; - if ((n & 1) == 1) - (void)inb(port); - } - outb(0x00, port + 4); -} - -#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ -#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ -#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ -#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ -#define EN_CCMD 0x000 /* Chip's command register */ -#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ -#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ -#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ -#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ -#define EN0_DCFG 0x00E /* Data configuration reg WR */ -#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ -#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ -#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ -static int __init mxser_read_register(int port, unsigned short *regs) -{ - int i, k, value, id; - unsigned int j; - - id = mxser_program_mode(port); - if (id < 0) - return id; - for (i = 0; i < 14; i++) { - k = (i & 0x3F) | 0x180; - for (j = 0x100; j > 0; j >>= 1) { - outb(CHIP_CS, port); - if (k & j) { - outb(CHIP_CS | CHIP_DO, port); - outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ - } else { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ - } - } - (void)inb(port); - value = 0; - for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); - if (inb(port) & CHIP_DI) - value |= j; - } - regs[i] = value; - outb(0, port); - } - mxser_normal_mode(port); - return id; -} - -static int mxser_ioctl_special(unsigned int cmd, void __user *argp) -{ - struct mxser_port *ip; - struct tty_port *port; - struct tty_struct *tty; - int result, status; - unsigned int i, j; - int ret = 0; - - switch (cmd) { - case MOXA_GET_MAJOR: - printk_ratelimited(KERN_WARNING "mxser: '%s' uses deprecated ioctl " - "%x (GET_MAJOR), fix your userspace\n", - current->comm, cmd); - return put_user(ttymajor, (int __user *)argp); - - case MOXA_CHKPORTENABLE: - result = 0; - for (i = 0; i < MXSER_BOARDS; i++) - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) - if (mxser_boards[i].ports[j].ioaddr) - result |= (1 << i); - return put_user(result, (unsigned long __user *)argp); - case MOXA_GETDATACOUNT: - /* The receive side is locked by port->slock but it isn't - clear that an exact snapshot is worth copying here */ - if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) - ret = -EFAULT; - return ret; - case MOXA_GETMSTATUS: { - struct mxser_mstatus ms, __user *msu = argp; - for (i = 0; i < MXSER_BOARDS; i++) - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { - ip = &mxser_boards[i].ports[j]; - port = &ip->port; - memset(&ms, 0, sizeof(ms)); - - mutex_lock(&port->mutex); - if (!ip->ioaddr) - goto copy; - - tty = tty_port_tty_get(port); - - if (!tty) - ms.cflag = ip->normal_termios.c_cflag; - else - ms.cflag = tty->termios.c_cflag; - tty_kref_put(tty); - spin_lock_irq(&ip->slock); - status = inb(ip->ioaddr + UART_MSR); - spin_unlock_irq(&ip->slock); - if (status & UART_MSR_DCD) - ms.dcd = 1; - if (status & UART_MSR_DSR) - ms.dsr = 1; - if (status & UART_MSR_CTS) - ms.cts = 1; - copy: - mutex_unlock(&port->mutex); - if (copy_to_user(msu, &ms, sizeof(ms))) - return -EFAULT; - msu++; - } - return 0; - } - case MOXA_ASPP_MON_EXT: { - struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */ - unsigned int cflag, iflag, p; - u8 opmode; - - me = kzalloc(sizeof(*me), GFP_KERNEL); - if (!me) - return -ENOMEM; - - for (i = 0, p = 0; i < MXSER_BOARDS; i++) { - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) { - if (p >= ARRAY_SIZE(me->rx_cnt)) { - i = MXSER_BOARDS; - break; - } - ip = &mxser_boards[i].ports[j]; - port = &ip->port; - - mutex_lock(&port->mutex); - if (!ip->ioaddr) { - mutex_unlock(&port->mutex); - continue; - } - - spin_lock_irq(&ip->slock); - status = mxser_get_msr(ip->ioaddr, 0, p); - - if (status & UART_MSR_TERI) - ip->icount.rng++; - if (status & UART_MSR_DDSR) - ip->icount.dsr++; - if (status & UART_MSR_DDCD) - ip->icount.dcd++; - if (status & UART_MSR_DCTS) - ip->icount.cts++; - - ip->mon_data.modem_status = status; - me->rx_cnt[p] = ip->mon_data.rxcnt; - me->tx_cnt[p] = ip->mon_data.txcnt; - me->up_rxcnt[p] = ip->mon_data.up_rxcnt; - me->up_txcnt[p] = ip->mon_data.up_txcnt; - me->modem_status[p] = - ip->mon_data.modem_status; - spin_unlock_irq(&ip->slock); - - tty = tty_port_tty_get(&ip->port); - - if (!tty) { - cflag = ip->normal_termios.c_cflag; - iflag = ip->normal_termios.c_iflag; - me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios); - } else { - cflag = tty->termios.c_cflag; - iflag = tty->termios.c_iflag; - me->baudrate[p] = tty_get_baud_rate(tty); - } - tty_kref_put(tty); - - me->databits[p] = cflag & CSIZE; - me->stopbits[p] = cflag & CSTOPB; - me->parity[p] = cflag & (PARENB | PARODD | - CMSPAR); - - if (cflag & CRTSCTS) - me->flowctrl[p] |= 0x03; - - if (iflag & (IXON | IXOFF)) - me->flowctrl[p] |= 0x0C; - - if (ip->type == PORT_16550A) - me->fifo[p] = 1; - - if (ip->board->chip_flag == MOXA_MUST_MU860_HWID) { - opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); - opmode &= OP_MODE_MASK; - } else { - opmode = RS232_MODE; - } - me->iftype[p] = opmode; - mutex_unlock(&port->mutex); - } - } - if (copy_to_user(argp, me, sizeof(*me))) - ret = -EFAULT; - kfree(me); - return ret; - } - default: - return -ENOIOCTLCMD; - } - return 0; -} - static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, struct async_icount *cprev) { @@ -1680,6 +1226,41 @@ static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, return ret; } +/* We should likely switch to TIOCGRS485/TIOCSRS485. */ +static int mxser_ioctl_op_mode(struct mxser_port *port, int index, bool set, + int __user *u_opmode) +{ + int opmode, p = index % 4; + int shiftbit = p * 2; + u8 val; + + if (port->board->must_hwid != MOXA_MUST_MU860_HWID) + return -EFAULT; + + if (set) { + if (get_user(opmode, u_opmode)) + return -EFAULT; + + if (opmode & ~OP_MODE_MASK) + return -EINVAL; + + spin_lock_irq(&port->slock); + val = inb(port->opmode_ioaddr); + val &= ~(OP_MODE_MASK << shiftbit); + val |= (opmode << shiftbit); + outb(val, port->opmode_ioaddr); + spin_unlock_irq(&port->slock); + + return 0; + } + + spin_lock_irq(&port->slock); + opmode = inb(port->opmode_ioaddr) >> shiftbit; + spin_unlock_irq(&port->slock); + + return put_user(opmode & OP_MODE_MASK, u_opmode); +} + static int mxser_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { @@ -1688,47 +1269,9 @@ static int mxser_ioctl(struct tty_struct *tty, unsigned long flags; void __user *argp = (void __user *)arg; - if (tty->index == MXSER_PORTS) - return mxser_ioctl_special(cmd, argp); - - if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { - int p; - unsigned long opmode; - static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; - int shiftbit; - unsigned char val, mask; - - if (info->board->chip_flag != MOXA_MUST_MU860_HWID) - return -EFAULT; - - p = tty->index % 4; - if (cmd == MOXA_SET_OP_MODE) { - if (get_user(opmode, (int __user *) argp)) - return -EFAULT; - if (opmode != RS232_MODE && - opmode != RS485_2WIRE_MODE && - opmode != RS422_MODE && - opmode != RS485_4WIRE_MODE) - return -EFAULT; - mask = ModeMask[p]; - shiftbit = p * 2; - spin_lock_irq(&info->slock); - val = inb(info->opmode_ioaddr); - val &= mask; - val |= (opmode << shiftbit); - outb(val, info->opmode_ioaddr); - spin_unlock_irq(&info->slock); - } else { - shiftbit = p * 2; - spin_lock_irq(&info->slock); - opmode = inb(info->opmode_ioaddr) >> shiftbit; - spin_unlock_irq(&info->slock); - opmode &= OP_MODE_MASK; - if (put_user(opmode, (int __user *)argp)) - return -EFAULT; - } - return 0; - } + if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) + return mxser_ioctl_op_mode(info, tty->index, + cmd == MOXA_SET_OP_MODE, argp); if (cmd != TIOCMIWAIT && tty_io_error(tty)) return -EIO; @@ -1749,72 +1292,6 @@ static int mxser_ioctl(struct tty_struct *tty, return wait_event_interruptible(info->port.delta_msr_wait, mxser_cflags_changed(info, arg, &cnow)); - case MOXA_HighSpeedOn: - return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); - case MOXA_SDS_RSTICOUNTER: - spin_lock_irq(&info->slock); - info->mon_data.rxcnt = 0; - info->mon_data.txcnt = 0; - spin_unlock_irq(&info->slock); - return 0; - - case MOXA_ASPP_OQUEUE:{ - int len, lsr; - - len = mxser_chars_in_buffer(tty); - spin_lock_irq(&info->slock); - lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE; - spin_unlock_irq(&info->slock); - len += (lsr ? 0 : 1); - - return put_user(len, (int __user *)argp); - } - case MOXA_ASPP_MON: { - int mcr, status; - - spin_lock_irq(&info->slock); - status = mxser_get_msr(info->ioaddr, 1, tty->index); - mxser_check_modem_status(tty, info, status); - - mcr = inb(info->ioaddr + UART_MCR); - spin_unlock_irq(&info->slock); - - if (mcr & MOXA_MUST_MCR_XON_FLAG) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; - - if (mcr & MOXA_MUST_MCR_TX_XON) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; - - if (tty->hw_stopped) - info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; - else - info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; - - if (copy_to_user(argp, &info->mon_data, - sizeof(struct mxser_mon))) - return -EFAULT; - - return 0; - } - case MOXA_ASPP_LSTATUS: { - if (put_user(info->err_shadow, (unsigned char __user *)argp)) - return -EFAULT; - - info->err_shadow = 0; - return 0; - } - case MOXA_SET_BAUD_METHOD: { - int method; - - if (get_user(method, (int __user *)argp)) - return -EFAULT; - mxser_set_baud_method[tty->index] = method; - return put_user(method, (int __user *)argp); - } default: return -ENOIOCTLCMD; } @@ -1860,7 +1337,7 @@ static void mxser_stoprx(struct tty_struct *tty) info->ldisc_stop_rx = 1; if (I_IXOFF(tty)) { - if (info->board->chip_flag) { + if (info->board->must_hwid) { info->IER &= ~MOXA_MUST_RECV_ISR; outb(info->IER, info->ioaddr + UART_IER); } else { @@ -1896,7 +1373,7 @@ static void mxser_unthrottle(struct tty_struct *tty) if (info->x_char) info->x_char = 0; else { - if (info->board->chip_flag) { + if (info->board->must_hwid) { info->IER |= MOXA_MUST_RECV_ISR; outb(info->IER, info->ioaddr + UART_IER); } else { @@ -1917,7 +1394,7 @@ static void mxser_unthrottle(struct tty_struct *tty) /* * mxser_stop() and mxser_start() * - * This routines are called before setting or resetting tty->stopped. + * This routines are called before setting or resetting tty->flow.stopped. * They enable or disable transmitter interrupts, as necessary. */ static void mxser_stop(struct tty_struct *tty) @@ -1926,10 +1403,8 @@ static void mxser_stop(struct tty_struct *tty) unsigned long flags; spin_lock_irqsave(&info->slock, flags); - if (info->IER & UART_IER_THRI) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } + if (info->IER & UART_IER_THRI) + __mxser_stop_tx(info); spin_unlock_irqrestore(&info->slock, flags); } @@ -1939,11 +1414,8 @@ static void mxser_start(struct tty_struct *tty) unsigned long flags; spin_lock_irqsave(&info->slock, flags); - if (info->xmit_cnt && info->port.xmit_buf) { - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } + if (info->xmit_cnt && info->port.xmit_buf) + __mxser_start_tx(info); spin_unlock_irqrestore(&info->slock, flags); } @@ -1963,12 +1435,11 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi /* Handle sw stopped */ if ((old_termios->c_iflag & IXON) && !I_IXON(tty)) { - tty->stopped = 0; + tty->flow.stopped = 0; - if (info->board->chip_flag) { + if (info->board->must_hwid) { spin_lock_irqsave(&info->slock, flags); - mxser_disable_must_rx_software_flow_control( - info->ioaddr); + mxser_must_set_rx_sw_flow_control(info->ioaddr, false); spin_unlock_irqrestore(&info->slock, flags); } @@ -2051,88 +1522,92 @@ static int mxser_rs_break(struct tty_struct *tty, int break_state) { struct mxser_port *info = tty->driver_data; unsigned long flags; + u8 lcr; spin_lock_irqsave(&info->slock, flags); + lcr = inb(info->ioaddr + UART_LCR); if (break_state == -1) - outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, - info->ioaddr + UART_LCR); + lcr |= UART_LCR_SBC; else - outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, - info->ioaddr + UART_LCR); + lcr &= ~UART_LCR_SBC; + outb(lcr, info->ioaddr + UART_LCR); spin_unlock_irqrestore(&info->slock, flags); + return 0; } -static void mxser_receive_chars(struct tty_struct *tty, - struct mxser_port *port, int *status) +static bool mxser_receive_chars_new(struct tty_struct *tty, + struct mxser_port *port, u8 status) { - unsigned char ch, gdl; - int ignored = 0; - int cnt = 0; - int recv_room; - int max = 256; + enum mxser_must_hwid hwid = port->board->must_hwid; + u8 gdl; - recv_room = tty->receive_room; - if (recv_room == 0 && !port->ldisc_stop_rx) + if (hwid == MOXA_OTHER_UART) + return false; + if (status & UART_LSR_BRK_ERROR_BITS) + return false; + if (hwid == MOXA_MUST_MU860_HWID && (status & MOXA_MUST_LSR_RERR)) + return false; + if (status & MOXA_MUST_LSR_RERR) + return false; + + gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); + if (hwid == MOXA_MUST_MU150_HWID) + gdl &= MOXA_MUST_GDL_MASK; + + if (gdl >= tty->receive_room && !port->ldisc_stop_rx) mxser_stoprx(tty); - if (port->board->chip_flag != MOXA_OTHER_UART) { - if (*status & UART_LSR_SPECIAL) - goto intr_old; - if (port->board->chip_flag == MOXA_MUST_MU860_HWID && - (*status & MOXA_MUST_LSR_RERR)) - goto intr_old; - if (*status & MOXA_MUST_LSR_RERR) - goto intr_old; - - gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); - - if (port->board->chip_flag == MOXA_MUST_MU150_HWID) - gdl &= MOXA_MUST_GDL_MASK; - if (gdl >= recv_room) { - if (!port->ldisc_stop_rx) - mxser_stoprx(tty); - } - while (gdl--) { - ch = inb(port->ioaddr + UART_RX); - tty_insert_flip_char(&port->port, ch, 0); - cnt++; - } - goto end_intr; + while (gdl--) { + u8 ch = inb(port->ioaddr + UART_RX); + tty_insert_flip_char(&port->port, ch, 0); } -intr_old: + + return true; +} + +static u8 mxser_receive_chars_old(struct tty_struct *tty, + struct mxser_port *port, u8 status) +{ + enum mxser_must_hwid hwid = port->board->must_hwid; + int recv_room = tty->receive_room; + int ignored = 0; + int max = 256; + int cnt = 0; + u8 ch; do { if (max-- < 0) break; ch = inb(port->ioaddr + UART_RX); - if (port->board->chip_flag && (*status & UART_LSR_OE)) - outb(0x23, port->ioaddr + UART_FCR); - *status &= port->read_status_mask; - if (*status & port->ignore_status_mask) { + if (hwid && (status & UART_LSR_OE)) + outb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + MOXA_MUST_FCR_GDA_MODE_ENABLE, + port->ioaddr + UART_FCR); + status &= port->read_status_mask; + if (status & port->ignore_status_mask) { if (++ignored > 100) break; } else { char flag = 0; - if (*status & UART_LSR_SPECIAL) { - if (*status & UART_LSR_BI) { + if (status & UART_LSR_BRK_ERROR_BITS) { + if (status & UART_LSR_BI) { flag = TTY_BREAK; port->icount.brk++; if (port->port.flags & ASYNC_SAK) do_SAK(tty); - } else if (*status & UART_LSR_PE) { + } else if (status & UART_LSR_PE) { flag = TTY_PARITY; port->icount.parity++; - } else if (*status & UART_LSR_FE) { + } else if (status & UART_LSR_FE) { flag = TTY_FRAME; port->icount.frame++; - } else if (*status & UART_LSR_OE) { + } else if (status & UART_LSR_OE) { flag = TTY_OVERRUN; port->icount.overrun++; - } else - flag = TTY_BREAK; + } } tty_insert_flip_char(&port->port, ch, flag); cnt++; @@ -2144,18 +1619,27 @@ intr_old: } - if (port->board->chip_flag) + if (hwid) break; - *status = inb(port->ioaddr + UART_LSR); - } while (*status & UART_LSR_DR); + status = inb(port->ioaddr + UART_LSR); + } while (status & UART_LSR_DR); -end_intr: - mxvar_log.rxcnt[tty->index] += cnt; - port->mon_data.rxcnt += cnt; - port->mon_data.up_rxcnt += cnt; + return status; +} + +static u8 mxser_receive_chars(struct tty_struct *tty, + struct mxser_port *port, u8 status) +{ + if (tty->receive_room == 0 && !port->ldisc_stop_rx) + mxser_stoprx(tty); + + if (!mxser_receive_chars_new(tty, port, status)) + status = mxser_receive_chars_old(tty, port, status); tty_flip_buffer_push(&port->port); + + return status; } static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port) @@ -2165,9 +1649,6 @@ static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port if (port->x_char) { outb(port->x_char, port->ioaddr + UART_TX); port->x_char = 0; - mxvar_log.txcnt[tty->index]++; - port->mon_data.txcnt++; - port->mon_data.up_txcnt++; port->icount.tx++; return; } @@ -2175,12 +1656,9 @@ static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port if (port->port.xmit_buf == NULL) return; - if (port->xmit_cnt <= 0 || tty->stopped || - (tty->hw_stopped && - (port->type != PORT_16550A) && - (!port->board->chip_flag))) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + UART_IER); + if (!port->xmit_cnt || tty->flow.stopped || + (tty->hw_stopped && !mxser_16550A_or_MUST(port))) { + __mxser_stop_tx(port); return; } @@ -2190,22 +1668,72 @@ static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port outb(port->port.xmit_buf[port->xmit_tail++], port->ioaddr + UART_TX); port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1); - if (--port->xmit_cnt <= 0) + if (!--port->xmit_cnt) break; } while (--count > 0); - mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt); - port->mon_data.txcnt += (cnt - port->xmit_cnt); - port->mon_data.up_txcnt += (cnt - port->xmit_cnt); port->icount.tx += (cnt - port->xmit_cnt); if (port->xmit_cnt < WAKEUP_CHARS) tty_wakeup(tty); - if (port->xmit_cnt <= 0) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + UART_IER); + if (!port->xmit_cnt) + __mxser_stop_tx(port); +} + +static bool mxser_port_isr(struct mxser_port *port) +{ + struct tty_struct *tty; + u8 iir, msr, status; + bool error = false; + + iir = inb(port->ioaddr + UART_IIR); + if (iir & UART_IIR_NO_INT) + return true; + + iir &= MOXA_MUST_IIR_MASK; + tty = tty_port_tty_get(&port->port); + if (!tty || port->closing || !tty_port_initialized(&port->port)) { + status = inb(port->ioaddr + UART_LSR); + outb(MOXA_MUST_FCR_GDA_MODE_ENABLE | UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + port->ioaddr + UART_FCR); + inb(port->ioaddr + UART_MSR); + + error = true; + goto put_tty; } + + status = inb(port->ioaddr + UART_LSR); + + if (port->board->must_hwid) { + if (iir == MOXA_MUST_IIR_GDA || + iir == MOXA_MUST_IIR_RDA || + iir == MOXA_MUST_IIR_RTO || + iir == MOXA_MUST_IIR_LSR) + status = mxser_receive_chars(tty, port, status); + } else { + status &= port->read_status_mask; + if (status & UART_LSR_DR) + status = mxser_receive_chars(tty, port, status); + } + + msr = inb(port->ioaddr + UART_MSR); + if (msr & UART_MSR_ANY_DELTA) + mxser_check_modem_status(tty, port, msr); + + if (port->board->must_hwid) { + if (iir == 0x02 && (status & UART_LSR_THRE)) + mxser_transmit_chars(tty, port); + } else { + if (status & UART_LSR_THRE) + mxser_transmit_chars(tty, port); + } + +put_tty: + tty_kref_put(tty); + + return error; } /* @@ -2213,33 +1741,21 @@ static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port */ static irqreturn_t mxser_interrupt(int irq, void *dev_id) { - int status, iir, i; - struct mxser_board *brd = NULL; + struct mxser_board *brd = dev_id; struct mxser_port *port; - int max, irqbits, bits, msr; unsigned int int_cnt, pass_counter = 0; + unsigned int i, max = brd->nports; int handled = IRQ_NONE; - struct tty_struct *tty; + u8 irqbits, bits, mask = BIT(max) - 1; - for (i = 0; i < MXSER_BOARDS; i++) - if (dev_id == &mxser_boards[i]) { - brd = dev_id; - break; - } - - if (i == MXSER_BOARDS) - goto irq_stop; - if (brd == NULL) - goto irq_stop; - max = brd->info->nports; while (pass_counter++ < MXSER_ISR_PASS_LIMIT) { - irqbits = inb(brd->vector) & brd->vector_mask; - if (irqbits == brd->vector_mask) + irqbits = inb(brd->vector) & mask; + if (irqbits == mask) break; handled = IRQ_HANDLED; for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { - if (irqbits == brd->vector_mask) + if (irqbits == mask) break; if (bits & irqbits) continue; @@ -2248,65 +1764,13 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id) int_cnt = 0; spin_lock(&port->slock); do { - iir = inb(port->ioaddr + UART_IIR); - if (iir & UART_IIR_NO_INT) + if (mxser_port_isr(port)) break; - iir &= MOXA_MUST_IIR_MASK; - tty = tty_port_tty_get(&port->port); - if (!tty || port->closing || - !tty_port_initialized(&port->port)) { - status = inb(port->ioaddr + UART_LSR); - outb(0x27, port->ioaddr + UART_FCR); - inb(port->ioaddr + UART_MSR); - tty_kref_put(tty); - break; - } - - status = inb(port->ioaddr + UART_LSR); - - if (status & UART_LSR_PE) - port->err_shadow |= NPPI_NOTIFY_PARITY; - if (status & UART_LSR_FE) - port->err_shadow |= NPPI_NOTIFY_FRAMING; - if (status & UART_LSR_OE) - port->err_shadow |= - NPPI_NOTIFY_HW_OVERRUN; - if (status & UART_LSR_BI) - port->err_shadow |= NPPI_NOTIFY_BREAK; - - if (port->board->chip_flag) { - if (iir == MOXA_MUST_IIR_GDA || - iir == MOXA_MUST_IIR_RDA || - iir == MOXA_MUST_IIR_RTO || - iir == MOXA_MUST_IIR_LSR) - mxser_receive_chars(tty, port, - &status); - - } else { - status &= port->read_status_mask; - if (status & UART_LSR_DR) - mxser_receive_chars(tty, port, - &status); - } - msr = inb(port->ioaddr + UART_MSR); - if (msr & UART_MSR_ANY_DELTA) - mxser_check_modem_status(tty, port, msr); - - if (port->board->chip_flag) { - if (iir == 0x02 && (status & - UART_LSR_THRE)) - mxser_transmit_chars(tty, port); - } else { - if (status & UART_LSR_THRE) - mxser_transmit_chars(tty, port); - } - tty_kref_put(tty); } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); spin_unlock(&port->slock); } } -irq_stop: return handled; } @@ -2346,254 +1810,103 @@ static const struct tty_port_operations mxser_port_ops = { * The MOXA Smartio/Industio serial driver boot-time initialization code! */ -static bool allow_overlapping_vector; -module_param(allow_overlapping_vector, bool, S_IRUGO); -MODULE_PARM_DESC(allow_overlapping_vector, "whether we allow ISA cards to be configured such that vector overlabs IO ports (default=no)"); - -static bool mxser_overlapping_vector(struct mxser_board *brd) -{ - return allow_overlapping_vector && - brd->vector >= brd->ports[0].ioaddr && - brd->vector < brd->ports[0].ioaddr + 8 * brd->info->nports; -} - -static int mxser_request_vector(struct mxser_board *brd) -{ - if (mxser_overlapping_vector(brd)) - return 0; - return request_region(brd->vector, 1, "mxser(vector)") ? 0 : -EIO; -} - -static void mxser_release_vector(struct mxser_board *brd) -{ - if (mxser_overlapping_vector(brd)) - return; - release_region(brd->vector, 1); -} - -static void mxser_release_ISA_res(struct mxser_board *brd) -{ - release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); - mxser_release_vector(brd); -} - -static int mxser_initbrd(struct mxser_board *brd) +static void mxser_initbrd(struct mxser_board *brd, bool high_baud) { struct mxser_port *info; unsigned int i; - int retval; + bool is_mu860; - printk(KERN_INFO "mxser: max. baud rate = %d bps\n", - brd->ports[0].max_baud); + brd->must_hwid = mxser_must_get_hwid(brd->ports[0].ioaddr); + is_mu860 = brd->must_hwid == MOXA_MUST_MU860_HWID; - for (i = 0; i < brd->info->nports; i++) { + for (i = 0; i < UART_INFO_NUM; i++) { + if (Gpci_uart_info[i].type == brd->must_hwid) { + brd->max_baud = Gpci_uart_info[i].max_baud; + + /* exception....CP-102 */ + if (high_baud) + brd->max_baud = 921600; + break; + } + } + + if (is_mu860) { + /* set to RS232 mode by default */ + outb(0, brd->vector + 4); + outb(0, brd->vector + 0x0c); + } + + for (i = 0; i < brd->nports; i++) { info = &brd->ports[i]; + if (is_mu860) { + if (i < 4) + info->opmode_ioaddr = brd->vector + 4; + else + info->opmode_ioaddr = brd->vector + 0x0c; + } tty_port_init(&info->port); info->port.ops = &mxser_port_ops; info->board = brd; - info->stop_rx = 0; info->ldisc_stop_rx = 0; /* Enhance mode enabled here */ - if (brd->chip_flag != MOXA_OTHER_UART) - mxser_enable_must_enchance_mode(info->ioaddr); + if (brd->must_hwid != MOXA_OTHER_UART) + mxser_must_set_enhance_mode(info->ioaddr, true); - info->type = brd->uart_type; + info->type = PORT_16550A; - process_txrx_fifo(info); + mxser_process_txrx_fifo(info); - info->custom_divisor = info->baud_base * 16; info->port.close_delay = 5 * HZ / 10; info->port.closing_wait = 30 * HZ; - info->normal_termios = mxvar_sdriver->init_termios; - memset(&info->mon_data, 0, sizeof(struct mxser_mon)); - info->err_shadow = 0; spin_lock_init(&info->slock); /* before set INT ISR, disable all int */ outb(inb(info->ioaddr + UART_IER) & 0xf0, info->ioaddr + UART_IER); } - - retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", - brd); - if (retval) { - for (i = 0; i < brd->info->nports; i++) - tty_port_destroy(&brd->ports[i].port); - printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may " - "conflict with another device.\n", - brd->info->name, brd->irq); - } - - return retval; -} - -static void mxser_board_remove(struct mxser_board *brd) -{ - unsigned int i; - - for (i = 0; i < brd->info->nports; i++) { - tty_unregister_device(mxvar_sdriver, brd->idx + i); - tty_port_destroy(&brd->ports[i].port); - } - free_irq(brd->irq, brd); -} - -static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) -{ - int id, i, bits, ret; - unsigned short regs[16], irq; - unsigned char scratch, scratch2; - - brd->chip_flag = MOXA_OTHER_UART; - - id = mxser_read_register(cap, regs); - switch (id) { - case C168_ASIC_ID: - brd->info = &mxser_cards[0]; - break; - case C104_ASIC_ID: - brd->info = &mxser_cards[1]; - break; - case CI104J_ASIC_ID: - brd->info = &mxser_cards[2]; - break; - case C102_ASIC_ID: - brd->info = &mxser_cards[5]; - break; - case CI132_ASIC_ID: - brd->info = &mxser_cards[6]; - break; - case CI134_ASIC_ID: - brd->info = &mxser_cards[7]; - break; - default: - return 0; - } - - irq = 0; - /* some ISA cards have 2 ports, but we want to see them as 4-port (why?) - Flag-hack checks if configuration should be read as 2-port here. */ - if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - if (irq != (regs[9] & 0xFF00)) - goto err_irqconflict; - } else if (brd->info->nports == 4) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if (irq != regs[9]) - goto err_irqconflict; - } else if (brd->info->nports == 8) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if ((irq != regs[9]) || (irq != regs[10])) - goto err_irqconflict; - } - - if (!irq) { - printk(KERN_ERR "mxser: interrupt number unset\n"); - return -EIO; - } - brd->irq = ((int)(irq & 0xF000) >> 12); - for (i = 0; i < 8; i++) - brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8; - if ((regs[12] & 0x80) == 0) { - printk(KERN_ERR "mxser: invalid interrupt vector\n"); - return -EIO; - } - brd->vector = (int)regs[11]; /* interrupt vector */ - if (id == 1) - brd->vector_mask = 0x00FF; - else - brd->vector_mask = 0x000F; - for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { - if (regs[12] & bits) { - brd->ports[i].baud_base = 921600; - brd->ports[i].max_baud = 921600; - } else { - brd->ports[i].baud_base = 115200; - brd->ports[i].max_baud = 115200; - } - } - scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); - outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); - outb(0, cap + UART_EFR); /* EFR is the same as FCR */ - outb(scratch2, cap + UART_LCR); - outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); - scratch = inb(cap + UART_IIR); - - if (scratch & 0xC0) - brd->uart_type = PORT_16550A; - else - brd->uart_type = PORT_16450; - if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports, - "mxser(IO)")) { - printk(KERN_ERR "mxser: can't request ports I/O region: " - "0x%.8lx-0x%.8lx\n", - brd->ports[0].ioaddr, brd->ports[0].ioaddr + - 8 * brd->info->nports - 1); - return -EIO; - } - - ret = mxser_request_vector(brd); - if (ret) { - release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); - printk(KERN_ERR "mxser: can't request interrupt vector region: " - "0x%.8lx-0x%.8lx\n", - brd->ports[0].ioaddr, brd->ports[0].ioaddr + - 8 * brd->info->nports - 1); - return ret; - } - return brd->info->nports; - -err_irqconflict: - printk(KERN_ERR "mxser: invalid interrupt number\n"); - return -EIO; } static int mxser_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { -#ifdef CONFIG_PCI struct mxser_board *brd; - unsigned int i, j; + unsigned int i, base; unsigned long ioaddress; + unsigned short nports = MXSER_NPORTS(ent->driver_data); struct device *tty_dev; int retval = -EINVAL; - for (i = 0; i < MXSER_BOARDS; i++) - if (mxser_boards[i].info == NULL) - break; - + i = find_first_zero_bit(mxser_boards, MXSER_BOARDS); if (i >= MXSER_BOARDS) { dev_err(&pdev->dev, "too many boards found (maximum %d), board " "not configured\n", MXSER_BOARDS); goto err; } - brd = &mxser_boards[i]; - brd->idx = i * MXSER_PORTS_PER_BOARD; - dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n", - mxser_cards[ent->driver_data].name, - pdev->bus->number, PCI_SLOT(pdev->devfn)); + brd = devm_kzalloc(&pdev->dev, struct_size(brd, ports, nports), + GFP_KERNEL); + if (!brd) + goto err; - retval = pci_enable_device(pdev); + brd->idx = i; + __set_bit(brd->idx, mxser_boards); + base = i * MXSER_PORTS_PER_BOARD; + + retval = pcim_enable_device(pdev); if (retval) { dev_err(&pdev->dev, "PCI enable failed\n"); - goto err; + goto err_zero; } /* io address */ ioaddress = pci_resource_start(pdev, 2); retval = pci_request_region(pdev, 2, "mxser(IO)"); if (retval) - goto err_dis; + goto err_zero; - brd->info = &mxser_cards[ent->driver_data]; - for (i = 0; i < brd->info->nports; i++) + brd->nports = nports; + for (i = 0; i < nports; i++) brd->ports[i].ioaddr = ioaddress + 8 * i; /* vector */ @@ -2606,53 +1919,23 @@ static int mxser_probe(struct pci_dev *pdev, /* irq */ brd->irq = pdev->irq; - brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr); - brd->uart_type = PORT_16550A; - brd->vector_mask = 0; + mxser_initbrd(brd, ent->driver_data & MXSER_HIGHBAUD); - for (i = 0; i < brd->info->nports; i++) { - for (j = 0; j < UART_INFO_NUM; j++) { - if (Gpci_uart_info[j].type == brd->chip_flag) { - brd->ports[i].max_baud = - Gpci_uart_info[j].max_baud; - - /* exception....CP-102 */ - if (brd->info->flags & MXSER_HIGHBAUD) - brd->ports[i].max_baud = 921600; - break; - } - } + retval = devm_request_irq(&pdev->dev, brd->irq, mxser_interrupt, + IRQF_SHARED, "mxser", brd); + if (retval) { + dev_err(&pdev->dev, "request irq failed"); + goto err_relbrd; } - if (brd->chip_flag == MOXA_MUST_MU860_HWID) { - for (i = 0; i < brd->info->nports; i++) { - if (i < 4) - brd->ports[i].opmode_ioaddr = ioaddress + 4; - else - brd->ports[i].opmode_ioaddr = ioaddress + 0x0c; - } - outb(0, ioaddress + 4); /* default set to RS232 mode */ - outb(0, ioaddress + 0x0c); /* default set to RS232 mode */ - } - - for (i = 0; i < brd->info->nports; i++) { - brd->vector_mask |= (1 << i); - brd->ports[i].baud_base = 921600; - } - - /* mxser_initbrd will hook ISR. */ - retval = mxser_initbrd(brd); - if (retval) - goto err_rel3; - - for (i = 0; i < brd->info->nports; i++) { + for (i = 0; i < nports; i++) { tty_dev = tty_port_register_device(&brd->ports[i].port, - mxvar_sdriver, brd->idx + i, &pdev->dev); + mxvar_sdriver, base + i, &pdev->dev); if (IS_ERR(tty_dev)) { retval = PTR_ERR(tty_dev); for (; i > 0; i--) tty_unregister_device(mxvar_sdriver, - brd->idx + i - 1); + base + i - 1); goto err_relbrd; } } @@ -2661,35 +1944,25 @@ static int mxser_probe(struct pci_dev *pdev, return 0; err_relbrd: - for (i = 0; i < brd->info->nports; i++) + for (i = 0; i < nports; i++) tty_port_destroy(&brd->ports[i].port); - free_irq(brd->irq, brd); -err_rel3: - pci_release_region(pdev, 3); err_zero: - brd->info = NULL; - pci_release_region(pdev, 2); -err_dis: - pci_disable_device(pdev); + __clear_bit(brd->idx, mxser_boards); err: return retval; -#else - return -ENODEV; -#endif } static void mxser_remove(struct pci_dev *pdev) { -#ifdef CONFIG_PCI struct mxser_board *brd = pci_get_drvdata(pdev); + unsigned int i, base = brd->idx * MXSER_PORTS_PER_BOARD; - mxser_board_remove(brd); + for (i = 0; i < brd->nports; i++) { + tty_unregister_device(mxvar_sdriver, base + i); + tty_port_destroy(&brd->ports[i].port); + } - pci_release_region(pdev, 2); - pci_release_region(pdev, 3); - pci_disable_device(pdev); - brd->info = NULL; -#endif + __clear_bit(brd->idx, mxser_boards); } static struct pci_driver mxser_driver = { @@ -2701,18 +1974,12 @@ static struct pci_driver mxser_driver = { static int __init mxser_module_init(void) { - struct mxser_board *brd; - struct device *tty_dev; - unsigned int b, i, m; int retval; - mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); + mxvar_sdriver = alloc_tty_driver(MXSER_PORTS); if (!mxvar_sdriver) return -ENOMEM; - printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", - MXSER_VERSION); - /* Initialize the tty_driver structure */ mxvar_sdriver->name = "ttyMI"; mxvar_sdriver->major = ttymajor; @@ -2731,57 +1998,10 @@ static int __init mxser_module_init(void) goto err_put; } - /* Start finding ISA boards here */ - for (m = 0, b = 0; b < MXSER_BOARDS; b++) { - if (!ioaddr[b]) - continue; - - brd = &mxser_boards[m]; - retval = mxser_get_ISA_conf(ioaddr[b], brd); - if (retval <= 0) { - brd->info = NULL; - continue; - } - - printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n", - brd->info->name, ioaddr[b]); - - /* mxser_initbrd will hook ISR. */ - if (mxser_initbrd(brd) < 0) { - mxser_release_ISA_res(brd); - brd->info = NULL; - continue; - } - - brd->idx = m * MXSER_PORTS_PER_BOARD; - for (i = 0; i < brd->info->nports; i++) { - tty_dev = tty_port_register_device(&brd->ports[i].port, - mxvar_sdriver, brd->idx + i, NULL); - if (IS_ERR(tty_dev)) { - for (; i > 0; i--) - tty_unregister_device(mxvar_sdriver, - brd->idx + i - 1); - for (i = 0; i < brd->info->nports; i++) - tty_port_destroy(&brd->ports[i].port); - free_irq(brd->irq, brd); - mxser_release_ISA_res(brd); - brd->info = NULL; - break; - } - } - if (brd->info == NULL) - continue; - - m++; - } - retval = pci_register_driver(&mxser_driver); if (retval) { printk(KERN_ERR "mxser: can't register pci driver\n"); - if (!m) { - retval = -ENODEV; - goto err_unr; - } /* else: we have some ISA cards under control */ + goto err_unr; } return 0; @@ -2794,19 +2014,9 @@ err_put: static void __exit mxser_module_exit(void) { - unsigned int i; - pci_unregister_driver(&mxser_driver); - - for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */ - if (mxser_boards[i].info != NULL) - mxser_board_remove(&mxser_boards[i]); tty_unregister_driver(mxvar_sdriver); put_tty_driver(mxvar_sdriver); - - for (i = 0; i < MXSER_BOARDS; i++) - if (mxser_boards[i].info != NULL) - mxser_release_ISA_res(&mxser_boards[i]); } module_init(mxser_module_init); diff --git a/drivers/tty/mxser.h b/drivers/tty/mxser.h deleted file mode 100644 index e6cb15626567..000000000000 --- a/drivers/tty/mxser.h +++ /dev/null @@ -1,151 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _MXSER_H -#define _MXSER_H - -/* - * Semi-public control interfaces - */ - -/* - * MOXA ioctls - */ - -#define MOXA 0x400 -#define MOXA_GETDATACOUNT (MOXA + 23) -#define MOXA_DIAGNOSE (MOXA + 50) -#define MOXA_CHKPORTENABLE (MOXA + 60) -#define MOXA_HighSpeedOn (MOXA + 61) -#define MOXA_GET_MAJOR (MOXA + 63) -#define MOXA_GETMSTATUS (MOXA + 65) -#define MOXA_SET_OP_MODE (MOXA + 66) -#define MOXA_GET_OP_MODE (MOXA + 67) - -#define RS232_MODE 0 -#define RS485_2WIRE_MODE 1 -#define RS422_MODE 2 -#define RS485_4WIRE_MODE 3 -#define OP_MODE_MASK 3 - -#define MOXA_SDS_RSTICOUNTER (MOXA + 69) -#define MOXA_ASPP_OQUEUE (MOXA + 70) -#define MOXA_ASPP_MON (MOXA + 73) -#define MOXA_ASPP_LSTATUS (MOXA + 74) -#define MOXA_ASPP_MON_EXT (MOXA + 75) -#define MOXA_SET_BAUD_METHOD (MOXA + 76) - -/* --------------------------------------------------- */ - -#define NPPI_NOTIFY_PARITY 0x01 -#define NPPI_NOTIFY_FRAMING 0x02 -#define NPPI_NOTIFY_HW_OVERRUN 0x04 -#define NPPI_NOTIFY_SW_OVERRUN 0x08 -#define NPPI_NOTIFY_BREAK 0x10 - -#define NPPI_NOTIFY_CTSHOLD 0x01 /* Tx hold by CTS low */ -#define NPPI_NOTIFY_DSRHOLD 0x02 /* Tx hold by DSR low */ -#define NPPI_NOTIFY_XOFFHOLD 0x08 /* Tx hold by Xoff received */ -#define NPPI_NOTIFY_XOFFXENT 0x10 /* Xoff Sent */ - -/* follow just for Moxa Must chip define. */ -/* */ -/* when LCR register (offset 0x03) write following value, */ -/* the Must chip will enter enchance mode. And write value */ -/* on EFR (offset 0x02) bit 6,7 to change bank. */ -#define MOXA_MUST_ENTER_ENCHANCE 0xBF - -/* when enhance mode enable, access on general bank register */ -#define MOXA_MUST_GDL_REGISTER 0x07 -#define MOXA_MUST_GDL_MASK 0x7F -#define MOXA_MUST_GDL_HAS_BAD_DATA 0x80 - -#define MOXA_MUST_LSR_RERR 0x80 /* error in receive FIFO */ -/* enchance register bank select and enchance mode setting register */ -/* when LCR register equal to 0xBF */ -#define MOXA_MUST_EFR_REGISTER 0x02 -/* enchance mode enable */ -#define MOXA_MUST_EFR_EFRB_ENABLE 0x10 -/* enchance reister bank set 0, 1, 2 */ -#define MOXA_MUST_EFR_BANK0 0x00 -#define MOXA_MUST_EFR_BANK1 0x40 -#define MOXA_MUST_EFR_BANK2 0x80 -#define MOXA_MUST_EFR_BANK3 0xC0 -#define MOXA_MUST_EFR_BANK_MASK 0xC0 - -/* set XON1 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XON1_REGISTER 0x04 - -/* set XON2 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XON2_REGISTER 0x05 - -/* set XOFF1 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XOFF1_REGISTER 0x06 - -/* set XOFF2 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XOFF2_REGISTER 0x07 - -#define MOXA_MUST_RBRTL_REGISTER 0x04 -#define MOXA_MUST_RBRTH_REGISTER 0x05 -#define MOXA_MUST_RBRTI_REGISTER 0x06 -#define MOXA_MUST_THRTL_REGISTER 0x07 -#define MOXA_MUST_ENUM_REGISTER 0x04 -#define MOXA_MUST_HWID_REGISTER 0x05 -#define MOXA_MUST_ECR_REGISTER 0x06 -#define MOXA_MUST_CSR_REGISTER 0x07 - -/* good data mode enable */ -#define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20 -/* only good data put into RxFIFO */ -#define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10 - -/* enable CTS interrupt */ -#define MOXA_MUST_IER_ECTSI 0x80 -/* enable RTS interrupt */ -#define MOXA_MUST_IER_ERTSI 0x40 -/* enable Xon/Xoff interrupt */ -#define MOXA_MUST_IER_XINT 0x20 -/* enable GDA interrupt */ -#define MOXA_MUST_IER_EGDAI 0x10 - -#define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI) - -/* GDA interrupt pending */ -#define MOXA_MUST_IIR_GDA 0x1C -#define MOXA_MUST_IIR_RDA 0x04 -#define MOXA_MUST_IIR_RTO 0x0C -#define MOXA_MUST_IIR_LSR 0x06 - -/* received Xon/Xoff or specical interrupt pending */ -#define MOXA_MUST_IIR_XSC 0x10 - -/* RTS/CTS change state interrupt pending */ -#define MOXA_MUST_IIR_RTSCTS 0x20 -#define MOXA_MUST_IIR_MASK 0x3E - -#define MOXA_MUST_MCR_XON_FLAG 0x40 -#define MOXA_MUST_MCR_XON_ANY 0x80 -#define MOXA_MUST_MCR_TX_XON 0x08 - -/* software flow control on chip mask value */ -#define MOXA_MUST_EFR_SF_MASK 0x0F -/* send Xon1/Xoff1 */ -#define MOXA_MUST_EFR_SF_TX1 0x08 -/* send Xon2/Xoff2 */ -#define MOXA_MUST_EFR_SF_TX2 0x04 -/* send Xon1,Xon2/Xoff1,Xoff2 */ -#define MOXA_MUST_EFR_SF_TX12 0x0C -/* don't send Xon/Xoff */ -#define MOXA_MUST_EFR_SF_TX_NO 0x00 -/* Tx software flow control mask */ -#define MOXA_MUST_EFR_SF_TX_MASK 0x0C -/* don't receive Xon/Xoff */ -#define MOXA_MUST_EFR_SF_RX_NO 0x00 -/* receive Xon1/Xoff1 */ -#define MOXA_MUST_EFR_SF_RX1 0x02 -/* receive Xon2/Xoff2 */ -#define MOXA_MUST_EFR_SF_RX2 0x01 -/* receive Xon1,Xon2/Xoff1,Xoff2 */ -#define MOXA_MUST_EFR_SF_RX12 0x03 -/* Rx software flow control mask */ -#define MOXA_MUST_EFR_SF_RX_MASK 0x03 - -#endif diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 5fea02cfb0cc..e907b7a5cab5 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -512,7 +512,7 @@ static void gsm_print_packet(const char *hdr, int addr, int cr, */ /** - * gsm_stuff_packet - bytestuff a packet + * gsm_stuff_frame - bytestuff a packet * @input: input buffer * @output: output buffer * @len: length of input @@ -1594,7 +1594,7 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen) } /** - * gsm_dlci_control - data arrived on control channel + * gsm_dlci_command - data arrived on control channel * @dlci: channel * @data: block of bytes received * @len: length of received block @@ -2424,7 +2424,7 @@ static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) } static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) + const char *fp, int count) { struct gsm_mux *gsm = tty->disc_data; char flags = TTY_NORMAL; @@ -2557,6 +2557,8 @@ static void gsmld_write_wakeup(struct tty_struct *tty) * @file: file object * @buf: userspace buffer pointer * @nr: size of I/O + * @cookie: unused + * @offset: unused * * Perform reads for the line discipline. We are guaranteed that the * line discipline will not be closed under us but we may get multiple @@ -2857,6 +2859,7 @@ static int gsm_create_network(struct gsm_dlci *dlci, struct gsm_netconfig *nc) /* Line discipline for real tty */ static struct tty_ldisc_ops tty_ldisc_packet = { .owner = THIS_MODULE, + .num = N_GSM0710, .name = "n_gsm", .open = gsmld_open, .close = gsmld_close, @@ -3055,7 +3058,7 @@ static int gsmtty_write(struct tty_struct *tty, const unsigned char *buf, return sent; } -static int gsmtty_write_room(struct tty_struct *tty) +static unsigned int gsmtty_write_room(struct tty_struct *tty) { struct gsm_dlci *dlci = tty->driver_data; if (dlci->state == DLCI_CLOSED) @@ -3063,7 +3066,7 @@ static int gsmtty_write_room(struct tty_struct *tty) return TX_SIZE - kfifo_len(&dlci->fifo); } -static int gsmtty_chars_in_buffer(struct tty_struct *tty) +static unsigned int gsmtty_chars_in_buffer(struct tty_struct *tty) { struct gsm_dlci *dlci = tty->driver_data; if (dlci->state == DLCI_CLOSED) @@ -3242,7 +3245,7 @@ static const struct tty_operations gsmtty_ops = { static int __init gsm_init(void) { /* Fill in our line protocol discipline, and register it */ - int status = tty_register_ldisc(N_GSM0710, &tty_ldisc_packet); + int status = tty_register_ldisc(&tty_ldisc_packet); if (status != 0) { pr_err("n_gsm: can't register line discipline (err = %d)\n", status); @@ -3251,9 +3254,9 @@ static int __init gsm_init(void) gsm_tty_driver = alloc_tty_driver(256); if (!gsm_tty_driver) { - tty_unregister_ldisc(N_GSM0710); pr_err("gsm_init: tty allocation failed.\n"); - return -EINVAL; + status = -ENOMEM; + goto err_unreg_ldisc; } gsm_tty_driver->driver_name = "gsmtty"; gsm_tty_driver->name = "gsmtty"; @@ -3269,22 +3272,23 @@ static int __init gsm_init(void) tty_set_operations(gsm_tty_driver, &gsmtty_ops); if (tty_register_driver(gsm_tty_driver)) { - put_tty_driver(gsm_tty_driver); - tty_unregister_ldisc(N_GSM0710); pr_err("gsm_init: tty registration failed.\n"); - return -EBUSY; + status = -EBUSY; + goto err_put_driver; } pr_debug("gsm_init: loaded as %d,%d.\n", gsm_tty_driver->major, gsm_tty_driver->minor_start); return 0; +err_put_driver: + put_tty_driver(gsm_tty_driver); +err_unreg_ldisc: + tty_unregister_ldisc(&tty_ldisc_packet); + return status; } static void __exit gsm_exit(void) { - int status = tty_unregister_ldisc(N_GSM0710); - if (status != 0) - pr_err("n_gsm: can't unregister line discipline (err = %d)\n", - status); + tty_unregister_ldisc(&tty_ldisc_packet); tty_unregister_driver(gsm_tty_driver); put_tty_driver(gsm_tty_driver); } diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index b0f33e8ac819..580a37b3fe1b 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -358,7 +358,7 @@ static void n_hdlc_tty_wakeup(struct tty_struct *tty) * interpreted as one HDLC frame. */ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, - char *flags, int count) + const char *flags, int count) { register struct n_hdlc *n_hdlc = tty->disc_data; register struct n_hdlc_buf *buf; @@ -411,8 +411,10 @@ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, * n_hdlc_tty_read - Called to retrieve one frame of data (if available) * @tty: pointer to tty instance data * @file: pointer to open file object - * @buf: pointer to returned data buffer + * @kbuf: pointer to returned data buffer * @nr: size of returned data buffer + * @cookie: stored rbuf from previous run + * @offset: offset into the data buffer * * Returns the number of bytes returned or error code. */ @@ -788,6 +790,7 @@ static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *buf_list) static struct tty_ldisc_ops n_hdlc_ldisc = { .owner = THIS_MODULE, + .num = N_HDLC, .name = "hdlc", .open = n_hdlc_tty_open, .close = n_hdlc_tty_close, @@ -807,7 +810,7 @@ static int __init n_hdlc_init(void) /* range check maxframe arg */ maxframe = clamp(maxframe, 4096, MAX_HDLC_FRAME_SIZE); - status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc); + status = tty_register_ldisc(&n_hdlc_ldisc); if (!status) pr_info("N_HDLC line discipline registered with maxframe=%d\n", maxframe); @@ -821,14 +824,7 @@ static int __init n_hdlc_init(void) static void __exit n_hdlc_exit(void) { - /* Release tty registration of line discipline */ - int status = tty_unregister_ldisc(N_HDLC); - - if (status) - pr_err("N_HDLC: can't unregister line discipline (err = %d)\n", - status); - else - pr_info("N_HDLC: line discipline unregistered\n"); + tty_unregister_ldisc(&n_hdlc_ldisc); } module_init(n_hdlc_init); diff --git a/drivers/tty/n_null.c b/drivers/tty/n_null.c index b8f67b5f1ef8..f913b665af72 100644 --- a/drivers/tty/n_null.c +++ b/drivers/tty/n_null.c @@ -33,13 +33,14 @@ static ssize_t n_null_write(struct tty_struct *tty, struct file *file, } static void n_null_receivebuf(struct tty_struct *tty, - const unsigned char *cp, char *fp, + const unsigned char *cp, const char *fp, int cnt) { } static struct tty_ldisc_ops null_ldisc = { .owner = THIS_MODULE, + .num = N_NULL, .name = "n_null", .open = n_null_open, .close = n_null_close, @@ -50,13 +51,13 @@ static struct tty_ldisc_ops null_ldisc = { static int __init n_null_init(void) { - BUG_ON(tty_register_ldisc(N_NULL, &null_ldisc)); + BUG_ON(tty_register_ldisc(&null_ldisc)); return 0; } static void __exit n_null_exit(void) { - tty_unregister_ldisc(N_NULL); + tty_unregister_ldisc(&null_ldisc); } module_init(n_null_init); diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c deleted file mode 100644 index 2eb76ea1d88d..000000000000 --- a/drivers/tty/n_r3964.c +++ /dev/null @@ -1,1283 +0,0 @@ -// SPDX-License-Identifier: GPL-1.0+ -/* r3964 linediscipline for linux - * - * ----------------------------------------------------------- - * Copyright by - * Philips Automation Projects - * Kassel (Germany) - * ----------------------------------------------------------- - * Author: - * L. Haag - * - * $Log: n_r3964.c,v $ - * Revision 1.10 2001/03/18 13:02:24 dwmw2 - * Fix timer usage, use spinlocks properly. - * - * Revision 1.9 2001/03/18 12:52:14 dwmw2 - * Merge changes in 2.4.2 - * - * Revision 1.8 2000/03/23 14:14:54 dwmw2 - * Fix race in sleeping in r3964_read() - * - * Revision 1.7 1999/28/08 11:41:50 dwmw2 - * Port to 2.3 kernel - * - * Revision 1.6 1998/09/30 00:40:40 dwmw2 - * Fixed compilation on 2.0.x kernels - * Updated to newly registered tty-ldisc number 9 - * - * Revision 1.5 1998/09/04 21:57:36 dwmw2 - * Signal handling bug fixes, port to 2.1.x. - * - * Revision 1.4 1998/04/02 20:26:59 lhaag - * select, blocking, ... - * - * Revision 1.3 1998/02/12 18:58:43 root - * fixed some memory leaks - * calculation of checksum characters - * - * Revision 1.2 1998/02/07 13:03:34 root - * ioctl read_telegram - * - * Revision 1.1 1998/02/06 19:21:03 root - * Initial revision - * - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* used in new tty drivers */ -#include /* used in new tty drivers */ -#include -#include -#include -#include -#include - -/*#define DEBUG_QUEUE*/ - -/* Log successful handshake and protocol operations */ -/*#define DEBUG_PROTO_S*/ - -/* Log handshake and protocol errors: */ -/*#define DEBUG_PROTO_E*/ - -/* Log Linediscipline operations (open, close, read, write...): */ -/*#define DEBUG_LDISC*/ - -/* Log module and memory operations (init, cleanup; kmalloc, kfree): */ -/*#define DEBUG_MODUL*/ - -/* Macro helpers for debug output: */ -#define TRACE(format, args...) printk("r3964: " format "\n" , ## args) - -#ifdef DEBUG_MODUL -#define TRACE_M(format, args...) printk("r3964: " format "\n" , ## args) -#else -#define TRACE_M(fmt, arg...) do {} while (0) -#endif -#ifdef DEBUG_PROTO_S -#define TRACE_PS(format, args...) printk("r3964: " format "\n" , ## args) -#else -#define TRACE_PS(fmt, arg...) do {} while (0) -#endif -#ifdef DEBUG_PROTO_E -#define TRACE_PE(format, args...) printk("r3964: " format "\n" , ## args) -#else -#define TRACE_PE(fmt, arg...) do {} while (0) -#endif -#ifdef DEBUG_LDISC -#define TRACE_L(format, args...) printk("r3964: " format "\n" , ## args) -#else -#define TRACE_L(fmt, arg...) do {} while (0) -#endif -#ifdef DEBUG_QUEUE -#define TRACE_Q(format, args...) printk("r3964: " format "\n" , ## args) -#else -#define TRACE_Q(fmt, arg...) do {} while (0) -#endif -static void add_tx_queue(struct r3964_info *, struct r3964_block_header *); -static void remove_from_tx_queue(struct r3964_info *pInfo, int error_code); -static void put_char(struct r3964_info *pInfo, unsigned char ch); -static void trigger_transmit(struct r3964_info *pInfo); -static void retry_transmit(struct r3964_info *pInfo); -static void transmit_block(struct r3964_info *pInfo); -static void receive_char(struct r3964_info *pInfo, const unsigned char c); -static void receive_error(struct r3964_info *pInfo, const char flag); -static void on_timeout(struct timer_list *t); -static int enable_signals(struct r3964_info *pInfo, struct pid *pid, int arg); -static int read_telegram(struct r3964_info *pInfo, struct pid *pid, - unsigned char __user * buf); -static void add_msg(struct r3964_client_info *pClient, int msg_id, int arg, - int error_code, struct r3964_block_header *pBlock); -static struct r3964_message *remove_msg(struct r3964_info *pInfo, - struct r3964_client_info *pClient); -static void remove_client_block(struct r3964_info *pInfo, - struct r3964_client_info *pClient); - -static int r3964_open(struct tty_struct *tty); -static void r3964_close(struct tty_struct *tty); -static ssize_t r3964_read(struct tty_struct *tty, struct file *file, - void *cookie, unsigned char *buf, size_t nr); -static ssize_t r3964_write(struct tty_struct *tty, struct file *file, - const unsigned char *buf, size_t nr); -static int r3964_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg); -#ifdef CONFIG_COMPAT -static int r3964_compat_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg); -#endif -static void r3964_set_termios(struct tty_struct *tty, struct ktermios *old); -static __poll_t r3964_poll(struct tty_struct *tty, struct file *file, - struct poll_table_struct *wait); -static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count); - -static struct tty_ldisc_ops tty_ldisc_N_R3964 = { - .owner = THIS_MODULE, - .name = "R3964", - .open = r3964_open, - .close = r3964_close, - .read = r3964_read, - .write = r3964_write, - .ioctl = r3964_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = r3964_compat_ioctl, -#endif - .set_termios = r3964_set_termios, - .poll = r3964_poll, - .receive_buf = r3964_receive_buf, -}; - -static void dump_block(const unsigned char *block, unsigned int length) -{ - unsigned int i, j; - char linebuf[16 * 3 + 1]; - - for (i = 0; i < length; i += 16) { - for (j = 0; (j < 16) && (j + i < length); j++) { - sprintf(linebuf + 3 * j, "%02x ", block[i + j]); - } - linebuf[3 * j] = '\0'; - TRACE_PS("%s", linebuf); - } -} - -/************************************************************* - * Driver initialisation - *************************************************************/ - -/************************************************************* - * Module support routines - *************************************************************/ - -static void __exit r3964_exit(void) -{ - int status; - - TRACE_M("cleanup_module()"); - - status = tty_unregister_ldisc(N_R3964); - - if (status != 0) { - printk(KERN_ERR "r3964: error unregistering linediscipline: " - "%d\n", status); - } else { - TRACE_L("linediscipline successfully unregistered"); - } -} - -static int __init r3964_init(void) -{ - int status; - - printk("r3964: Philips r3964 Driver $Revision: 1.10 $\n"); - - /* - * Register the tty line discipline - */ - - status = tty_register_ldisc(N_R3964, &tty_ldisc_N_R3964); - if (status == 0) { - TRACE_L("line discipline %d registered", N_R3964); - TRACE_L("flags=%x num=%x", tty_ldisc_N_R3964.flags, - tty_ldisc_N_R3964.num); - TRACE_L("open=%p", tty_ldisc_N_R3964.open); - TRACE_L("tty_ldisc_N_R3964 = %p", &tty_ldisc_N_R3964); - } else { - printk(KERN_ERR "r3964: error registering line discipline: " - "%d\n", status); - } - return status; -} - -module_init(r3964_init); -module_exit(r3964_exit); - -/************************************************************* - * Protocol implementation routines - *************************************************************/ - -static void add_tx_queue(struct r3964_info *pInfo, - struct r3964_block_header *pHeader) -{ - unsigned long flags; - - spin_lock_irqsave(&pInfo->lock, flags); - - pHeader->next = NULL; - - if (pInfo->tx_last == NULL) { - pInfo->tx_first = pInfo->tx_last = pHeader; - } else { - pInfo->tx_last->next = pHeader; - pInfo->tx_last = pHeader; - } - - spin_unlock_irqrestore(&pInfo->lock, flags); - - TRACE_Q("add_tx_queue %p, length %d, tx_first = %p", - pHeader, pHeader->length, pInfo->tx_first); -} - -static void remove_from_tx_queue(struct r3964_info *pInfo, int error_code) -{ - struct r3964_block_header *pHeader; - unsigned long flags; -#ifdef DEBUG_QUEUE - struct r3964_block_header *pDump; -#endif - - pHeader = pInfo->tx_first; - - if (pHeader == NULL) - return; - -#ifdef DEBUG_QUEUE - printk("r3964: remove_from_tx_queue: %p, length %u - ", - pHeader, pHeader->length); - for (pDump = pHeader; pDump; pDump = pDump->next) - printk("%p ", pDump); - printk("\n"); -#endif - - if (pHeader->owner) { - if (error_code) { - add_msg(pHeader->owner, R3964_MSG_ACK, 0, - error_code, NULL); - } else { - add_msg(pHeader->owner, R3964_MSG_ACK, pHeader->length, - error_code, NULL); - } - wake_up_interruptible(&pInfo->tty->read_wait); - } - - spin_lock_irqsave(&pInfo->lock, flags); - - pInfo->tx_first = pHeader->next; - if (pInfo->tx_first == NULL) { - pInfo->tx_last = NULL; - } - - spin_unlock_irqrestore(&pInfo->lock, flags); - - kfree(pHeader); - TRACE_M("remove_from_tx_queue - kfree %p", pHeader); - - TRACE_Q("remove_from_tx_queue: tx_first = %p, tx_last = %p", - pInfo->tx_first, pInfo->tx_last); -} - -static void add_rx_queue(struct r3964_info *pInfo, - struct r3964_block_header *pHeader) -{ - unsigned long flags; - - spin_lock_irqsave(&pInfo->lock, flags); - - pHeader->next = NULL; - - if (pInfo->rx_last == NULL) { - pInfo->rx_first = pInfo->rx_last = pHeader; - } else { - pInfo->rx_last->next = pHeader; - pInfo->rx_last = pHeader; - } - pInfo->blocks_in_rx_queue++; - - spin_unlock_irqrestore(&pInfo->lock, flags); - - TRACE_Q("add_rx_queue: %p, length = %d, rx_first = %p, count = %d", - pHeader, pHeader->length, - pInfo->rx_first, pInfo->blocks_in_rx_queue); -} - -static void remove_from_rx_queue(struct r3964_info *pInfo, - struct r3964_block_header *pHeader) -{ - unsigned long flags; - struct r3964_block_header *pFind; - - if (pHeader == NULL) - return; - - TRACE_Q("remove_from_rx_queue: rx_first = %p, rx_last = %p, count = %d", - pInfo->rx_first, pInfo->rx_last, pInfo->blocks_in_rx_queue); - TRACE_Q("remove_from_rx_queue: %p, length %u", - pHeader, pHeader->length); - - spin_lock_irqsave(&pInfo->lock, flags); - - if (pInfo->rx_first == pHeader) { - /* Remove the first block in the linked list: */ - pInfo->rx_first = pHeader->next; - - if (pInfo->rx_first == NULL) { - pInfo->rx_last = NULL; - } - pInfo->blocks_in_rx_queue--; - } else { - /* Find block to remove: */ - for (pFind = pInfo->rx_first; pFind; pFind = pFind->next) { - if (pFind->next == pHeader) { - /* Got it. */ - pFind->next = pHeader->next; - pInfo->blocks_in_rx_queue--; - if (pFind->next == NULL) { - /* Oh, removed the last one! */ - pInfo->rx_last = pFind; - } - break; - } - } - } - - spin_unlock_irqrestore(&pInfo->lock, flags); - - kfree(pHeader); - TRACE_M("remove_from_rx_queue - kfree %p", pHeader); - - TRACE_Q("remove_from_rx_queue: rx_first = %p, rx_last = %p, count = %d", - pInfo->rx_first, pInfo->rx_last, pInfo->blocks_in_rx_queue); -} - -static void put_char(struct r3964_info *pInfo, unsigned char ch) -{ - struct tty_struct *tty = pInfo->tty; - /* FIXME: put_char should not be called from an IRQ */ - tty_put_char(tty, ch); - pInfo->bcc ^= ch; -} - -static void flush(struct r3964_info *pInfo) -{ - struct tty_struct *tty = pInfo->tty; - - if (tty == NULL || tty->ops->flush_chars == NULL) - return; - tty->ops->flush_chars(tty); -} - -static void trigger_transmit(struct r3964_info *pInfo) -{ - unsigned long flags; - - spin_lock_irqsave(&pInfo->lock, flags); - - if ((pInfo->state == R3964_IDLE) && (pInfo->tx_first != NULL)) { - pInfo->state = R3964_TX_REQUEST; - pInfo->nRetry = 0; - pInfo->flags &= ~R3964_ERROR; - mod_timer(&pInfo->tmr, jiffies + R3964_TO_QVZ); - - spin_unlock_irqrestore(&pInfo->lock, flags); - - TRACE_PS("trigger_transmit - sent STX"); - - put_char(pInfo, STX); - flush(pInfo); - - pInfo->bcc = 0; - } else { - spin_unlock_irqrestore(&pInfo->lock, flags); - } -} - -static void retry_transmit(struct r3964_info *pInfo) -{ - if (pInfo->nRetry < R3964_MAX_RETRIES) { - TRACE_PE("transmission failed. Retry #%d", pInfo->nRetry); - pInfo->bcc = 0; - put_char(pInfo, STX); - flush(pInfo); - pInfo->state = R3964_TX_REQUEST; - pInfo->nRetry++; - mod_timer(&pInfo->tmr, jiffies + R3964_TO_QVZ); - } else { - TRACE_PE("transmission failed after %d retries", - R3964_MAX_RETRIES); - - remove_from_tx_queue(pInfo, R3964_TX_FAIL); - - put_char(pInfo, NAK); - flush(pInfo); - pInfo->state = R3964_IDLE; - - trigger_transmit(pInfo); - } -} - -static void transmit_block(struct r3964_info *pInfo) -{ - struct tty_struct *tty = pInfo->tty; - struct r3964_block_header *pBlock = pInfo->tx_first; - int room = 0; - - if (tty == NULL || pBlock == NULL) { - return; - } - - room = tty_write_room(tty); - - TRACE_PS("transmit_block %p, room %d, length %d", - pBlock, room, pBlock->length); - - while (pInfo->tx_position < pBlock->length) { - if (room < 2) - break; - - if (pBlock->data[pInfo->tx_position] == DLE) { - /* send additional DLE char: */ - put_char(pInfo, DLE); - } - put_char(pInfo, pBlock->data[pInfo->tx_position++]); - - room--; - } - - if ((pInfo->tx_position == pBlock->length) && (room >= 3)) { - put_char(pInfo, DLE); - put_char(pInfo, ETX); - if (pInfo->flags & R3964_BCC) { - put_char(pInfo, pInfo->bcc); - } - pInfo->state = R3964_WAIT_FOR_TX_ACK; - mod_timer(&pInfo->tmr, jiffies + R3964_TO_QVZ); - } - flush(pInfo); -} - -static void on_receive_block(struct r3964_info *pInfo) -{ - unsigned int length; - struct r3964_client_info *pClient; - struct r3964_block_header *pBlock; - - length = pInfo->rx_position; - - /* compare byte checksum characters: */ - if (pInfo->flags & R3964_BCC) { - if (pInfo->bcc != pInfo->last_rx) { - TRACE_PE("checksum error - got %x but expected %x", - pInfo->last_rx, pInfo->bcc); - pInfo->flags |= R3964_CHECKSUM; - } - } - - /* check for errors (parity, overrun,...): */ - if (pInfo->flags & R3964_ERROR) { - TRACE_PE("on_receive_block - transmission failed error %x", - pInfo->flags & R3964_ERROR); - - put_char(pInfo, NAK); - flush(pInfo); - if (pInfo->nRetry < R3964_MAX_RETRIES) { - pInfo->state = R3964_WAIT_FOR_RX_REPEAT; - pInfo->nRetry++; - mod_timer(&pInfo->tmr, jiffies + R3964_TO_RX_PANIC); - } else { - TRACE_PE("on_receive_block - failed after max retries"); - pInfo->state = R3964_IDLE; - } - return; - } - - /* received block; submit DLE: */ - put_char(pInfo, DLE); - flush(pInfo); - del_timer_sync(&pInfo->tmr); - TRACE_PS(" rx success: got %d chars", length); - - /* prepare struct r3964_block_header: */ - pBlock = kmalloc(length + sizeof(struct r3964_block_header), - GFP_KERNEL); - TRACE_M("on_receive_block - kmalloc %p", pBlock); - - if (pBlock == NULL) - return; - - pBlock->length = length; - pBlock->data = ((unsigned char *)pBlock) + - sizeof(struct r3964_block_header); - pBlock->locks = 0; - pBlock->next = NULL; - pBlock->owner = NULL; - - memcpy(pBlock->data, pInfo->rx_buf, length); - - /* queue block into rx_queue: */ - add_rx_queue(pInfo, pBlock); - - /* notify attached client processes: */ - for (pClient = pInfo->firstClient; pClient; pClient = pClient->next) { - if (pClient->sig_flags & R3964_SIG_DATA) { - add_msg(pClient, R3964_MSG_DATA, length, R3964_OK, - pBlock); - } - } - wake_up_interruptible(&pInfo->tty->read_wait); - - pInfo->state = R3964_IDLE; - - trigger_transmit(pInfo); -} - -static void receive_char(struct r3964_info *pInfo, const unsigned char c) -{ - switch (pInfo->state) { - case R3964_TX_REQUEST: - if (c == DLE) { - TRACE_PS("TX_REQUEST - got DLE"); - - pInfo->state = R3964_TRANSMITTING; - pInfo->tx_position = 0; - - transmit_block(pInfo); - } else if (c == STX) { - if (pInfo->nRetry == 0) { - TRACE_PE("TX_REQUEST - init conflict"); - if (pInfo->priority == R3964_SLAVE) { - goto start_receiving; - } - } else { - TRACE_PE("TX_REQUEST - secondary init " - "conflict!? Switching to SLAVE mode " - "for next rx."); - goto start_receiving; - } - } else { - TRACE_PE("TX_REQUEST - char != DLE: %x", c); - retry_transmit(pInfo); - } - break; - case R3964_TRANSMITTING: - if (c == NAK) { - TRACE_PE("TRANSMITTING - got NAK"); - retry_transmit(pInfo); - } else { - TRACE_PE("TRANSMITTING - got invalid char"); - - pInfo->state = R3964_WAIT_ZVZ_BEFORE_TX_RETRY; - mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ); - } - break; - case R3964_WAIT_FOR_TX_ACK: - if (c == DLE) { - TRACE_PS("WAIT_FOR_TX_ACK - got DLE"); - remove_from_tx_queue(pInfo, R3964_OK); - - pInfo->state = R3964_IDLE; - trigger_transmit(pInfo); - } else { - retry_transmit(pInfo); - } - break; - case R3964_WAIT_FOR_RX_REPEAT: - case R3964_IDLE: - if (c == STX) { - /* Prevent rx_queue from overflow: */ - if (pInfo->blocks_in_rx_queue >= - R3964_MAX_BLOCKS_IN_RX_QUEUE) { - TRACE_PE("IDLE - got STX but no space in " - "rx_queue!"); - pInfo->state = R3964_WAIT_FOR_RX_BUF; - mod_timer(&pInfo->tmr, - jiffies + R3964_TO_NO_BUF); - break; - } -start_receiving: - /* Ok, start receiving: */ - TRACE_PS("IDLE - got STX"); - pInfo->rx_position = 0; - pInfo->last_rx = 0; - pInfo->flags &= ~R3964_ERROR; - pInfo->state = R3964_RECEIVING; - mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ); - pInfo->nRetry = 0; - put_char(pInfo, DLE); - flush(pInfo); - pInfo->bcc = 0; - } - break; - case R3964_RECEIVING: - if (pInfo->rx_position < RX_BUF_SIZE) { - pInfo->bcc ^= c; - - if (c == DLE) { - if (pInfo->last_rx == DLE) { - pInfo->last_rx = 0; - goto char_to_buf; - } - pInfo->last_rx = DLE; - break; - } else if ((c == ETX) && (pInfo->last_rx == DLE)) { - if (pInfo->flags & R3964_BCC) { - pInfo->state = R3964_WAIT_FOR_BCC; - mod_timer(&pInfo->tmr, - jiffies + R3964_TO_ZVZ); - } else { - on_receive_block(pInfo); - } - } else { - pInfo->last_rx = c; -char_to_buf: - pInfo->rx_buf[pInfo->rx_position++] = c; - mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ); - } - } - /* else: overflow-msg? BUF_SIZE>MTU; should not happen? */ - break; - case R3964_WAIT_FOR_BCC: - pInfo->last_rx = c; - on_receive_block(pInfo); - break; - } -} - -static void receive_error(struct r3964_info *pInfo, const char flag) -{ - switch (flag) { - case TTY_NORMAL: - break; - case TTY_BREAK: - TRACE_PE("received break"); - pInfo->flags |= R3964_BREAK; - break; - case TTY_PARITY: - TRACE_PE("parity error"); - pInfo->flags |= R3964_PARITY; - break; - case TTY_FRAME: - TRACE_PE("frame error"); - pInfo->flags |= R3964_FRAME; - break; - case TTY_OVERRUN: - TRACE_PE("frame overrun"); - pInfo->flags |= R3964_OVERRUN; - break; - default: - TRACE_PE("receive_error - unknown flag %d", flag); - pInfo->flags |= R3964_UNKNOWN; - break; - } -} - -static void on_timeout(struct timer_list *t) -{ - struct r3964_info *pInfo = from_timer(pInfo, t, tmr); - - switch (pInfo->state) { - case R3964_TX_REQUEST: - TRACE_PE("TX_REQUEST - timeout"); - retry_transmit(pInfo); - break; - case R3964_WAIT_ZVZ_BEFORE_TX_RETRY: - put_char(pInfo, NAK); - flush(pInfo); - retry_transmit(pInfo); - break; - case R3964_WAIT_FOR_TX_ACK: - TRACE_PE("WAIT_FOR_TX_ACK - timeout"); - retry_transmit(pInfo); - break; - case R3964_WAIT_FOR_RX_BUF: - TRACE_PE("WAIT_FOR_RX_BUF - timeout"); - put_char(pInfo, NAK); - flush(pInfo); - pInfo->state = R3964_IDLE; - break; - case R3964_RECEIVING: - TRACE_PE("RECEIVING - timeout after %d chars", - pInfo->rx_position); - put_char(pInfo, NAK); - flush(pInfo); - pInfo->state = R3964_IDLE; - break; - case R3964_WAIT_FOR_RX_REPEAT: - TRACE_PE("WAIT_FOR_RX_REPEAT - timeout"); - pInfo->state = R3964_IDLE; - break; - case R3964_WAIT_FOR_BCC: - TRACE_PE("WAIT_FOR_BCC - timeout"); - put_char(pInfo, NAK); - flush(pInfo); - pInfo->state = R3964_IDLE; - break; - } -} - -static struct r3964_client_info *findClient(struct r3964_info *pInfo, - struct pid *pid) -{ - struct r3964_client_info *pClient; - - for (pClient = pInfo->firstClient; pClient; pClient = pClient->next) { - if (pClient->pid == pid) { - return pClient; - } - } - return NULL; -} - -static int enable_signals(struct r3964_info *pInfo, struct pid *pid, int arg) -{ - struct r3964_client_info *pClient; - struct r3964_client_info **ppClient; - struct r3964_message *pMsg; - - if ((arg & R3964_SIG_ALL) == 0) { - /* Remove client from client list */ - for (ppClient = &pInfo->firstClient; *ppClient; - ppClient = &(*ppClient)->next) { - pClient = *ppClient; - - if (pClient->pid == pid) { - TRACE_PS("removing client %d from client list", - pid_nr(pid)); - *ppClient = pClient->next; - while (pClient->msg_count) { - pMsg = remove_msg(pInfo, pClient); - if (pMsg) { - kfree(pMsg); - TRACE_M("enable_signals - msg " - "kfree %p", pMsg); - } - } - put_pid(pClient->pid); - kfree(pClient); - TRACE_M("enable_signals - kfree %p", pClient); - return 0; - } - } - return -EINVAL; - } else { - pClient = findClient(pInfo, pid); - if (pClient) { - /* update signal options */ - pClient->sig_flags = arg; - } else { - /* add client to client list */ - pClient = kmalloc(sizeof(struct r3964_client_info), - GFP_KERNEL); - TRACE_M("enable_signals - kmalloc %p", pClient); - if (pClient == NULL) - return -ENOMEM; - - TRACE_PS("add client %d to client list", pid_nr(pid)); - spin_lock_init(&pClient->lock); - pClient->sig_flags = arg; - pClient->pid = get_pid(pid); - pClient->next = pInfo->firstClient; - pClient->first_msg = NULL; - pClient->last_msg = NULL; - pClient->next_block_to_read = NULL; - pClient->msg_count = 0; - pInfo->firstClient = pClient; - } - } - - return 0; -} - -static int read_telegram(struct r3964_info *pInfo, struct pid *pid, - unsigned char __user * buf) -{ - struct r3964_client_info *pClient; - struct r3964_block_header *block; - - if (!buf) { - return -EINVAL; - } - - pClient = findClient(pInfo, pid); - if (pClient == NULL) { - return -EINVAL; - } - - block = pClient->next_block_to_read; - if (!block) { - return 0; - } else { - if (copy_to_user(buf, block->data, block->length)) - return -EFAULT; - - remove_client_block(pInfo, pClient); - return block->length; - } - - return -EINVAL; -} - -static void add_msg(struct r3964_client_info *pClient, int msg_id, int arg, - int error_code, struct r3964_block_header *pBlock) -{ - struct r3964_message *pMsg; - unsigned long flags; - - if (pClient->msg_count < R3964_MAX_MSG_COUNT - 1) { -queue_the_message: - - pMsg = kmalloc(sizeof(struct r3964_message), - error_code ? GFP_ATOMIC : GFP_KERNEL); - TRACE_M("add_msg - kmalloc %p", pMsg); - if (pMsg == NULL) { - return; - } - - spin_lock_irqsave(&pClient->lock, flags); - - pMsg->msg_id = msg_id; - pMsg->arg = arg; - pMsg->error_code = error_code; - pMsg->block = pBlock; - pMsg->next = NULL; - - if (pClient->last_msg == NULL) { - pClient->first_msg = pClient->last_msg = pMsg; - } else { - pClient->last_msg->next = pMsg; - pClient->last_msg = pMsg; - } - - pClient->msg_count++; - - if (pBlock != NULL) { - pBlock->locks++; - } - spin_unlock_irqrestore(&pClient->lock, flags); - } else { - if ((pClient->last_msg->msg_id == R3964_MSG_ACK) - && (pClient->last_msg->error_code == R3964_OVERFLOW)) { - pClient->last_msg->arg++; - TRACE_PE("add_msg - inc prev OVERFLOW-msg"); - } else { - msg_id = R3964_MSG_ACK; - arg = 0; - error_code = R3964_OVERFLOW; - pBlock = NULL; - TRACE_PE("add_msg - queue OVERFLOW-msg"); - goto queue_the_message; - } - } - /* Send SIGIO signal to client process: */ - if (pClient->sig_flags & R3964_USE_SIGIO) { - kill_pid(pClient->pid, SIGIO, 1); - } -} - -static struct r3964_message *remove_msg(struct r3964_info *pInfo, - struct r3964_client_info *pClient) -{ - struct r3964_message *pMsg = NULL; - unsigned long flags; - - if (pClient->first_msg) { - spin_lock_irqsave(&pClient->lock, flags); - - pMsg = pClient->first_msg; - pClient->first_msg = pMsg->next; - if (pClient->first_msg == NULL) { - pClient->last_msg = NULL; - } - - pClient->msg_count--; - if (pMsg->block) { - remove_client_block(pInfo, pClient); - pClient->next_block_to_read = pMsg->block; - } - spin_unlock_irqrestore(&pClient->lock, flags); - } - return pMsg; -} - -static void remove_client_block(struct r3964_info *pInfo, - struct r3964_client_info *pClient) -{ - struct r3964_block_header *block; - - TRACE_PS("remove_client_block PID %d", pid_nr(pClient->pid)); - - block = pClient->next_block_to_read; - if (block) { - block->locks--; - if (block->locks == 0) { - remove_from_rx_queue(pInfo, block); - } - } - pClient->next_block_to_read = NULL; -} - -/************************************************************* - * Line discipline routines - *************************************************************/ - -static int r3964_open(struct tty_struct *tty) -{ - struct r3964_info *pInfo; - - TRACE_L("open"); - TRACE_L("tty=%p, PID=%d, disc_data=%p", - tty, current->pid, tty->disc_data); - - pInfo = kmalloc(sizeof(struct r3964_info), GFP_KERNEL); - TRACE_M("r3964_open - info kmalloc %p", pInfo); - - if (!pInfo) { - printk(KERN_ERR "r3964: failed to alloc info structure\n"); - return -ENOMEM; - } - - pInfo->rx_buf = kmalloc(RX_BUF_SIZE, GFP_KERNEL); - TRACE_M("r3964_open - rx_buf kmalloc %p", pInfo->rx_buf); - - if (!pInfo->rx_buf) { - printk(KERN_ERR "r3964: failed to alloc receive buffer\n"); - kfree(pInfo); - TRACE_M("r3964_open - info kfree %p", pInfo); - return -ENOMEM; - } - - pInfo->tx_buf = kmalloc(TX_BUF_SIZE, GFP_KERNEL); - TRACE_M("r3964_open - tx_buf kmalloc %p", pInfo->tx_buf); - - if (!pInfo->tx_buf) { - printk(KERN_ERR "r3964: failed to alloc transmit buffer\n"); - kfree(pInfo->rx_buf); - TRACE_M("r3964_open - rx_buf kfree %p", pInfo->rx_buf); - kfree(pInfo); - TRACE_M("r3964_open - info kfree %p", pInfo); - return -ENOMEM; - } - - spin_lock_init(&pInfo->lock); - mutex_init(&pInfo->read_lock); - pInfo->tty = tty; - pInfo->priority = R3964_MASTER; - pInfo->rx_first = pInfo->rx_last = NULL; - pInfo->tx_first = pInfo->tx_last = NULL; - pInfo->rx_position = 0; - pInfo->tx_position = 0; - pInfo->last_rx = 0; - pInfo->blocks_in_rx_queue = 0; - pInfo->firstClient = NULL; - pInfo->state = R3964_IDLE; - pInfo->flags = R3964_DEBUG; - pInfo->nRetry = 0; - - tty->disc_data = pInfo; - tty->receive_room = 65536; - - timer_setup(&pInfo->tmr, on_timeout, 0); - - return 0; -} - -static void r3964_close(struct tty_struct *tty) -{ - struct r3964_info *pInfo = tty->disc_data; - struct r3964_client_info *pClient, *pNext; - struct r3964_message *pMsg; - struct r3964_block_header *pHeader, *pNextHeader; - unsigned long flags; - - TRACE_L("close"); - - /* - * Make sure that our task queue isn't activated. If it - * is, take it out of the linked list. - */ - del_timer_sync(&pInfo->tmr); - - /* Remove client-structs and message queues: */ - pClient = pInfo->firstClient; - while (pClient) { - pNext = pClient->next; - while (pClient->msg_count) { - pMsg = remove_msg(pInfo, pClient); - if (pMsg) { - kfree(pMsg); - TRACE_M("r3964_close - msg kfree %p", pMsg); - } - } - put_pid(pClient->pid); - kfree(pClient); - TRACE_M("r3964_close - client kfree %p", pClient); - pClient = pNext; - } - /* Remove jobs from tx_queue: */ - spin_lock_irqsave(&pInfo->lock, flags); - pHeader = pInfo->tx_first; - pInfo->tx_first = pInfo->tx_last = NULL; - spin_unlock_irqrestore(&pInfo->lock, flags); - - while (pHeader) { - pNextHeader = pHeader->next; - kfree(pHeader); - pHeader = pNextHeader; - } - - /* Free buffers: */ - kfree(pInfo->rx_buf); - TRACE_M("r3964_close - rx_buf kfree %p", pInfo->rx_buf); - kfree(pInfo->tx_buf); - TRACE_M("r3964_close - tx_buf kfree %p", pInfo->tx_buf); - kfree(pInfo); - TRACE_M("r3964_close - info kfree %p", pInfo); -} - -static ssize_t r3964_read(struct tty_struct *tty, struct file *file, - unsigned char *kbuf, size_t nr, - void **cookie, unsigned long offset) -{ - struct r3964_info *pInfo = tty->disc_data; - struct r3964_client_info *pClient; - struct r3964_message *pMsg; - struct r3964_client_message theMsg; - int ret; - - TRACE_L("read()"); - - /* - * Internal serialization of reads. - */ - if (file->f_flags & O_NONBLOCK) { - if (!mutex_trylock(&pInfo->read_lock)) - return -EAGAIN; - } else { - if (mutex_lock_interruptible(&pInfo->read_lock)) - return -ERESTARTSYS; - } - - pClient = findClient(pInfo, task_pid(current)); - if (pClient) { - pMsg = remove_msg(pInfo, pClient); - if (pMsg == NULL) { - /* no messages available. */ - if (tty_io_nonblock(tty, file)) { - ret = -EAGAIN; - goto unlock; - } - /* block until there is a message: */ - wait_event_interruptible(tty->read_wait, - (pMsg = remove_msg(pInfo, pClient))); - } - - /* If we still haven't got a message, we must have been signalled */ - - if (!pMsg) { - ret = -EINTR; - goto unlock; - } - - /* deliver msg to client process: */ - theMsg.msg_id = pMsg->msg_id; - theMsg.arg = pMsg->arg; - theMsg.error_code = pMsg->error_code; - ret = sizeof(struct r3964_client_message); - - kfree(pMsg); - TRACE_M("r3964_read - msg kfree %p", pMsg); - - memcpy(kbuf, &theMsg, ret); - - TRACE_PS("read - return %d", ret); - goto unlock; - } - ret = -EPERM; -unlock: - mutex_unlock(&pInfo->read_lock); - return ret; -} - -static ssize_t r3964_write(struct tty_struct *tty, struct file *file, - const unsigned char *data, size_t count) -{ - struct r3964_info *pInfo = tty->disc_data; - struct r3964_block_header *pHeader; - struct r3964_client_info *pClient; - unsigned char *new_data; - - TRACE_L("write request, %d characters", count); -/* - * Verify the pointers - */ - - if (!pInfo) - return -EIO; - -/* - * Ensure that the caller does not wish to send too much. - */ - if (count > R3964_MTU) { - if (pInfo->flags & R3964_DEBUG) { - TRACE_L(KERN_WARNING "r3964_write: truncating user " - "packet from %u to mtu %d", count, R3964_MTU); - } - count = R3964_MTU; - } -/* - * Allocate a buffer for the data and copy it from the buffer with header prepended - */ - new_data = kmalloc(count + sizeof(struct r3964_block_header), - GFP_KERNEL); - TRACE_M("r3964_write - kmalloc %p", new_data); - if (new_data == NULL) { - if (pInfo->flags & R3964_DEBUG) { - printk(KERN_ERR "r3964_write: no memory\n"); - } - return -ENOSPC; - } - - pHeader = (struct r3964_block_header *)new_data; - pHeader->data = new_data + sizeof(struct r3964_block_header); - pHeader->length = count; - pHeader->locks = 0; - pHeader->owner = NULL; - - pClient = findClient(pInfo, task_pid(current)); - if (pClient) { - pHeader->owner = pClient; - } - - memcpy(pHeader->data, data, count); /* We already verified this */ - - if (pInfo->flags & R3964_DEBUG) { - dump_block(pHeader->data, count); - } - -/* - * Add buffer to transmit-queue: - */ - add_tx_queue(pInfo, pHeader); - trigger_transmit(pInfo); - - return 0; -} - -static int r3964_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct r3964_info *pInfo = tty->disc_data; - if (pInfo == NULL) - return -EINVAL; - switch (cmd) { - case R3964_ENABLE_SIGNALS: - return enable_signals(pInfo, task_pid(current), arg); - case R3964_SETPRIORITY: - if (arg < R3964_MASTER || arg > R3964_SLAVE) - return -EINVAL; - pInfo->priority = arg & 0xff; - return 0; - case R3964_USE_BCC: - if (arg) - pInfo->flags |= R3964_BCC; - else - pInfo->flags &= ~R3964_BCC; - return 0; - case R3964_READ_TELEGRAM: - return read_telegram(pInfo, task_pid(current), - (unsigned char __user *)arg); - default: - return -ENOIOCTLCMD; - } -} - -#ifdef CONFIG_COMPAT -static int r3964_compat_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - switch (cmd) { - case R3964_ENABLE_SIGNALS: - case R3964_SETPRIORITY: - case R3964_USE_BCC: - return r3964_ioctl(tty, file, cmd, arg); - default: - return -ENOIOCTLCMD; - } -} -#endif - -static void r3964_set_termios(struct tty_struct *tty, struct ktermios *old) -{ - TRACE_L("set_termios"); -} - -/* Called without the kernel lock held - fine */ -static __poll_t r3964_poll(struct tty_struct *tty, struct file *file, - struct poll_table_struct *wait) -{ - struct r3964_info *pInfo = tty->disc_data; - struct r3964_client_info *pClient; - struct r3964_message *pMsg = NULL; - unsigned long flags; - __poll_t result = EPOLLOUT; - - TRACE_L("POLL"); - - pClient = findClient(pInfo, task_pid(current)); - if (pClient) { - poll_wait(file, &tty->read_wait, wait); - spin_lock_irqsave(&pInfo->lock, flags); - pMsg = pClient->first_msg; - spin_unlock_irqrestore(&pInfo->lock, flags); - if (pMsg) - result |= EPOLLIN | EPOLLRDNORM; - } else { - result = -EINVAL; - } - return result; -} - -static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) -{ - struct r3964_info *pInfo = tty->disc_data; - const unsigned char *p; - char *f, flags = TTY_NORMAL; - int i; - - for (i = count, p = cp, f = fp; i; i--, p++) { - if (f) - flags = *f++; - if (flags == TTY_NORMAL) { - receive_char(pInfo, *p); - } else { - receive_error(pInfo, flags); - } - - } -} - -MODULE_LICENSE("GPL"); -MODULE_ALIAS_LDISC(N_R3964); diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 9686c5d10571..0ec93f1a61f5 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -342,10 +342,10 @@ static void n_tty_packet_mode_flush(struct tty_struct *tty) { unsigned long flags; - if (tty->link->packet) { - spin_lock_irqsave(&tty->ctrl_lock, flags); - tty->ctrl_status |= TIOCPKT_FLUSHREAD; - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + if (tty->link->ctrl.packet) { + spin_lock_irqsave(&tty->ctrl.lock, flags); + tty->ctrl.pktstatus |= TIOCPKT_FLUSHREAD; + spin_unlock_irqrestore(&tty->ctrl.lock, flags); wake_up_interruptible(&tty->link->read_wait); } } @@ -361,7 +361,7 @@ static void n_tty_packet_mode_flush(struct tty_struct *tty) * Holds termios_rwsem to exclude producer/consumer while * buffer indices are reset. * - * Locking: ctrl_lock, exclusive termios_rwsem + * Locking: ctrl.lock, exclusive termios_rwsem */ static void n_tty_flush_buffer(struct tty_struct *tty) @@ -1103,7 +1103,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) * buffer is 'output'. The signal is processed first to alert any current * readers or writers to discontinue and exit their i/o loops. * - * Locking: ctrl_lock + * Locking: ctrl.lock */ static void __isig(int sig, struct tty_struct *tty) @@ -1245,7 +1245,6 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c) commit_echoes(tty); } else process_echoes(tty); - return; } /** @@ -1260,12 +1259,8 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c) * n_tty_receive_buf()/producer path: * caller holds non-exclusive termios_rwsem * publishes canon_head if canonical mode is active - * - * Returns 1 if LNEXT was received, else returns 0 */ - -static int -n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) +static void n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) { struct n_tty_data *ldata = tty->disc_data; @@ -1273,35 +1268,35 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) if (c == START_CHAR(tty)) { start_tty(tty); process_echoes(tty); - return 0; + return; } if (c == STOP_CHAR(tty)) { stop_tty(tty); - return 0; + return; } } if (L_ISIG(tty)) { if (c == INTR_CHAR(tty)) { n_tty_receive_signal_char(tty, SIGINT, c); - return 0; + return; } else if (c == QUIT_CHAR(tty)) { n_tty_receive_signal_char(tty, SIGQUIT, c); - return 0; + return; } else if (c == SUSP_CHAR(tty)) { n_tty_receive_signal_char(tty, SIGTSTP, c); - return 0; + return; } } - if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) { + if (tty->flow.stopped && !tty->flow.tco_stopped && I_IXON(tty) && I_IXANY(tty)) { start_tty(tty); process_echoes(tty); } if (c == '\r') { if (I_IGNCR(tty)) - return 0; + return; if (I_ICRNL(tty)) c = '\n'; } else if (c == '\n' && I_INLCR(tty)) @@ -1312,7 +1307,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) { eraser(c, tty); commit_echoes(tty); - return 0; + return; } if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) { ldata->lnext = 1; @@ -1324,7 +1319,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) commit_echoes(tty); } } - return 1; + return; } if (c == REPRINT_CHAR(tty) && L_ECHO(tty) && L_IEXTEN(tty)) { size_t tail = ldata->canon_head; @@ -1337,7 +1332,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) tail++; } commit_echoes(tty); - return 0; + return; } if (c == '\n') { if (L_ECHO(tty) || L_ECHONL(tty)) { @@ -1375,7 +1370,7 @@ handle_newline: smp_store_release(&ldata->canon_head, ldata->read_head); kill_fasync(&tty->fasync, SIGIO, POLL_IN); wake_up_interruptible_poll(&tty->read_wait, EPOLLIN); - return 0; + return; } } @@ -1397,15 +1392,13 @@ handle_newline: put_tty_queue(c, ldata); put_tty_queue(c, ldata); - return 0; } -static inline void -n_tty_receive_char_inline(struct tty_struct *tty, unsigned char c) +static void n_tty_receive_char(struct tty_struct *tty, unsigned char c) { struct n_tty_data *ldata = tty->disc_data; - if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) { + if (tty->flow.stopped && !tty->flow.tco_stopped && I_IXON(tty) && I_IXANY(tty)) { start_tty(tty); process_echoes(tty); } @@ -1423,31 +1416,6 @@ n_tty_receive_char_inline(struct tty_struct *tty, unsigned char c) put_tty_queue(c, ldata); } -static void n_tty_receive_char(struct tty_struct *tty, unsigned char c) -{ - n_tty_receive_char_inline(tty, c); -} - -static inline void -n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c) -{ - struct n_tty_data *ldata = tty->disc_data; - - if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) { - start_tty(tty); - process_echoes(tty); - } - if (L_ECHO(tty)) { - finish_erasing(ldata); - /* Record the column of first canon char. */ - if (ldata->canon_head == ldata->read_head) - echo_set_canon_col(ldata); - echo_char(c, tty); - commit_echoes(tty); - } - put_tty_queue(c, ldata); -} - static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c) { if (I_ISTRIP(tty)) @@ -1459,7 +1427,7 @@ static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c) if (c == STOP_CHAR(tty)) stop_tty(tty); else if (c == START_CHAR(tty) || - (tty->stopped && !tty->flow_stopped && I_IXANY(tty) && + (tty->flow.stopped && !tty->flow.tco_stopped && I_IXANY(tty) && c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty))) { start_tty(tty); @@ -1506,7 +1474,7 @@ n_tty_receive_char_lnext(struct tty_struct *tty, unsigned char c, char flag) static void n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) + const char *fp, int count) { struct n_tty_data *ldata = tty->disc_data; size_t n, head; @@ -1526,7 +1494,7 @@ n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp, static void n_tty_receive_buf_raw(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) + const char *fp, int count) { struct n_tty_data *ldata = tty->disc_data; char flag = TTY_NORMAL; @@ -1543,7 +1511,7 @@ n_tty_receive_buf_raw(struct tty_struct *tty, const unsigned char *cp, static void n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) + const char *fp, int count) { char flag = TTY_NORMAL; @@ -1555,68 +1523,46 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp, } } -static void -n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) +static void n_tty_receive_buf_standard(struct tty_struct *tty, + const unsigned char *cp, const char *fp, int count) { struct n_tty_data *ldata = tty->disc_data; char flag = TTY_NORMAL; while (count--) { + unsigned char c = *cp++; + if (fp) flag = *fp++; - if (likely(flag == TTY_NORMAL)) { - unsigned char c = *cp++; - if (I_ISTRIP(tty)) - c &= 0x7f; - if (I_IUCLC(tty) && L_IEXTEN(tty)) - c = tolower(c); - if (L_EXTPROC(tty)) { - put_tty_queue(c, ldata); - continue; - } - if (!test_bit(c, ldata->char_map)) - n_tty_receive_char_inline(tty, c); - else if (n_tty_receive_char_special(tty, c) && count) { - if (fp) - flag = *fp++; - n_tty_receive_char_lnext(tty, *cp++, flag); - count--; - } - } else - n_tty_receive_char_flagged(tty, *cp++, flag); - } -} + if (ldata->lnext) { + n_tty_receive_char_lnext(tty, c, flag); + continue; + } -static void -n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) -{ - struct n_tty_data *ldata = tty->disc_data; - char flag = TTY_NORMAL; + if (unlikely(flag != TTY_NORMAL)) { + n_tty_receive_char_flagged(tty, c, flag); + continue; + } - while (count--) { - if (fp) - flag = *fp++; - if (likely(flag == TTY_NORMAL)) { - unsigned char c = *cp++; + if (I_ISTRIP(tty)) + c &= 0x7f; + if (I_IUCLC(tty) && L_IEXTEN(tty)) + c = tolower(c); + if (L_EXTPROC(tty)) { + put_tty_queue(c, ldata); + continue; + } - if (!test_bit(c, ldata->char_map)) - n_tty_receive_char_fast(tty, c); - else if (n_tty_receive_char_special(tty, c) && count) { - if (fp) - flag = *fp++; - n_tty_receive_char_lnext(tty, *cp++, flag); - count--; - } - } else - n_tty_receive_char_flagged(tty, *cp++, flag); + if (test_bit(c, ldata->char_map)) + n_tty_receive_char_special(tty, c); + else + n_tty_receive_char(tty, c); } } static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) + const char *fp, int count) { struct n_tty_data *ldata = tty->disc_data; bool preops = I_ISTRIP(tty) || (I_IUCLC(tty) && L_IEXTEN(tty)); @@ -1628,19 +1574,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, else if (tty->closing && !L_EXTPROC(tty)) n_tty_receive_buf_closing(tty, cp, fp, count); else { - if (ldata->lnext) { - char flag = TTY_NORMAL; - - if (fp) - flag = *fp++; - n_tty_receive_char_lnext(tty, *cp++, flag); - count--; - } - - if (!preops && !I_PARMRK(tty)) - n_tty_receive_buf_fast(tty, cp, fp, count); - else - n_tty_receive_buf_standard(tty, cp, fp, count); + n_tty_receive_buf_standard(tty, cp, fp, count); flush_echoes(tty); if (tty->ops->flush_chars) @@ -1695,7 +1629,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, */ static int n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count, int flow) + const char *fp, int count, int flow) { struct n_tty_data *ldata = tty->disc_data; int room, n, rcvd = 0, overflow; @@ -1764,13 +1698,13 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp, } static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) + const char *fp, int count) { n_tty_receive_buf_common(tty, cp, fp, count, 0); } static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) + const char *fp, int count) { return n_tty_receive_buf_common(tty, cp, fp, count, 1); } @@ -1863,7 +1797,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) * Fix tty hang when I_IXON(tty) is cleared, but the tty * been stopped by STOP_CHAR(tty) before it. */ - if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) { + if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow.tco_stopped) { start_tty(tty); process_echoes(tty); } @@ -2091,7 +2025,7 @@ static bool canon_copy_from_read_buf(struct tty_struct *tty, * * Locking: redirected write test is safe * current->signal->tty check is safe - * ctrl_lock to safely reference tty->pgrp + * ctrl.lock to safely reference tty->ctrl.pgrp */ static int job_control(struct tty_struct *tty, struct file *file) @@ -2138,7 +2072,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, int minimum, time; ssize_t retval = 0; long timeout; - int packet; + bool packet; size_t tail; /* @@ -2194,20 +2128,20 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, } } - packet = tty->packet; + packet = tty->ctrl.packet; tail = ldata->read_tail; add_wait_queue(&tty->read_wait, &wait); while (nr) { /* First test for status change. */ - if (packet && tty->link->ctrl_status) { + if (packet && tty->link->ctrl.pktstatus) { unsigned char cs; if (kb != kbuf) break; - spin_lock_irq(&tty->link->ctrl_lock); - cs = tty->link->ctrl_status; - tty->link->ctrl_status = 0; - spin_unlock_irq(&tty->link->ctrl_lock); + spin_lock_irq(&tty->link->ctrl.lock); + cs = tty->link->ctrl.pktstatus; + tty->link->ctrl.pktstatus = 0; + spin_unlock_irq(&tty->link->ctrl.lock); *kb++ = cs; nr--; break; @@ -2434,7 +2368,7 @@ static __poll_t n_tty_poll(struct tty_struct *tty, struct file *file, if (input_available_p(tty, 1)) mask |= EPOLLIN | EPOLLRDNORM; } - if (tty->packet && tty->link->ctrl_status) + if (tty->ctrl.packet && tty->link->ctrl.pktstatus) mask |= EPOLLPRI | EPOLLIN | EPOLLRDNORM; if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) mask |= EPOLLHUP; @@ -2490,6 +2424,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file, static struct tty_ldisc_ops n_tty_ops = { .owner = THIS_MODULE, + .num = N_TTY, .name = "n_tty", .open = n_tty_open, .close = n_tty_close, @@ -2515,11 +2450,11 @@ void n_tty_inherit_ops(struct tty_ldisc_ops *ops) { *ops = n_tty_ops; ops->owner = NULL; - ops->refcount = ops->flags = 0; + ops->flags = 0; } EXPORT_SYMBOL_GPL(n_tty_inherit_ops); void __init n_tty_init(void) { - tty_register_ldisc(N_TTY, &n_tty_ops); + tty_register_ldisc(&n_tty_ops); } diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index 9a2d78ace49b..0c80f25c8c3d 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -1378,7 +1378,7 @@ static int nozomi_card_init(struct pci_dev *pdev, NOZOMI_NAME, dc); if (unlikely(ret)) { dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq); - goto err_free_kfifo; + goto err_free_all_kfifo; } DBG1("base_addr: %p", dc->base_addr); @@ -1416,12 +1416,15 @@ static int nozomi_card_init(struct pci_dev *pdev, return 0; err_free_tty: - for (i = 0; i < MAX_PORT; ++i) { + for (i--; i >= 0; i--) { tty_unregister_device(ntty_driver, dc->index_start + i); tty_port_destroy(&dc->port[i].port); } + free_irq(pdev->irq, dc); +err_free_all_kfifo: + i = MAX_PORT; err_free_kfifo: - for (i = 0; i < MAX_PORT; i++) + for (i--; i >= PORT_MDM; i--) kfifo_free(&dc->port[i].fifo_ul); err_free_sbuf: kfree(dc->send_buf); @@ -1636,10 +1639,10 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, * If the port is unplugged report lots of room and let the bits * dribble away so we don't block anything. */ -static int ntty_write_room(struct tty_struct *tty) +static unsigned int ntty_write_room(struct tty_struct *tty) { struct port *port = tty->driver_data; - int room = 4096; + unsigned int room = 4096; const struct nozomi *dc = get_dc_by_tty(tty); if (dc) @@ -1776,20 +1779,15 @@ static void ntty_throttle(struct tty_struct *tty) } /* Returns number of chars in buffer, called by tty layer */ -static s32 ntty_chars_in_buffer(struct tty_struct *tty) +static unsigned int ntty_chars_in_buffer(struct tty_struct *tty) { struct port *port = tty->driver_data; struct nozomi *dc = get_dc_by_tty(tty); - s32 rval = 0; - if (unlikely(!dc || !port)) { - goto exit_in_buffer; - } + if (unlikely(!dc || !port)) + return 0; - rval = kfifo_len(&port->fifo_ul); - -exit_in_buffer: - return rval; + return kfifo_len(&port->fifo_ul); } static const struct tty_port_operations noz_tty_port_ops = { diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 9b5d4ae5d8f2..74bfabe5b453 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -57,9 +57,9 @@ static void pty_close(struct tty_struct *tty, struct file *filp) set_bit(TTY_IO_ERROR, &tty->flags); wake_up_interruptible(&tty->read_wait); wake_up_interruptible(&tty->write_wait); - spin_lock_irq(&tty->ctrl_lock); - tty->packet = 0; - spin_unlock_irq(&tty->ctrl_lock); + spin_lock_irq(&tty->ctrl.lock); + tty->ctrl.packet = false; + spin_unlock_irq(&tty->ctrl.lock); /* Review - krefs on tty_link ?? */ if (!tty->link) return; @@ -113,7 +113,7 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c) struct tty_struct *to = tty->link; unsigned long flags; - if (tty->stopped) + if (tty->flow.stopped) return 0; if (c > 0) { @@ -136,26 +136,13 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c) * the other device. */ -static int pty_write_room(struct tty_struct *tty) +static unsigned int pty_write_room(struct tty_struct *tty) { - if (tty->stopped) + if (tty->flow.stopped) return 0; return tty_buffer_space_avail(tty->link->port); } -/** - * pty_chars_in_buffer - characters currently in our tx queue - * @tty: our tty - * - * Report how much we have in the transmit queue. As everything is - * instantly at the other end this is easy to implement. - */ - -static int pty_chars_in_buffer(struct tty_struct *tty) -{ - return 0; -} - /* Set the lock flag on a pty */ static int pty_set_lock(struct tty_struct *tty, int __user *arg) { @@ -185,16 +172,16 @@ static int pty_set_pktmode(struct tty_struct *tty, int __user *arg) if (get_user(pktmode, arg)) return -EFAULT; - spin_lock_irq(&tty->ctrl_lock); + spin_lock_irq(&tty->ctrl.lock); if (pktmode) { - if (!tty->packet) { - tty->link->ctrl_status = 0; + if (!tty->ctrl.packet) { + tty->link->ctrl.pktstatus = 0; smp_mb(); - tty->packet = 1; + tty->ctrl.packet = true; } } else - tty->packet = 0; - spin_unlock_irq(&tty->ctrl_lock); + tty->ctrl.packet = false; + spin_unlock_irq(&tty->ctrl.lock); return 0; } @@ -202,7 +189,7 @@ static int pty_set_pktmode(struct tty_struct *tty, int __user *arg) /* Get the packet mode of a pty */ static int pty_get_pktmode(struct tty_struct *tty, int __user *arg) { - int pktmode = tty->packet; + int pktmode = tty->ctrl.packet; return put_user(pktmode, arg); } @@ -232,11 +219,11 @@ static void pty_flush_buffer(struct tty_struct *tty) return; tty_buffer_flush(to, NULL); - if (to->packet) { - spin_lock_irq(&tty->ctrl_lock); - tty->ctrl_status |= TIOCPKT_FLUSHWRITE; + if (to->ctrl.packet) { + spin_lock_irq(&tty->ctrl.lock); + tty->ctrl.pktstatus |= TIOCPKT_FLUSHWRITE; wake_up_interruptible(&to->read_wait); - spin_unlock_irq(&tty->ctrl_lock); + spin_unlock_irq(&tty->ctrl.lock); } } @@ -266,7 +253,7 @@ static void pty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { /* See if packet mode change of state. */ - if (tty->link && tty->link->packet) { + if (tty->link && tty->link->ctrl.packet) { int extproc = (old_termios->c_lflag & EXTPROC) | L_EXTPROC(tty); int old_flow = ((old_termios->c_iflag & IXON) && (old_termios->c_cc[VSTOP] == '\023') && @@ -275,17 +262,17 @@ static void pty_set_termios(struct tty_struct *tty, STOP_CHAR(tty) == '\023' && START_CHAR(tty) == '\021'); if ((old_flow != new_flow) || extproc) { - spin_lock_irq(&tty->ctrl_lock); + spin_lock_irq(&tty->ctrl.lock); if (old_flow != new_flow) { - tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP); + tty->ctrl.pktstatus &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP); if (new_flow) - tty->ctrl_status |= TIOCPKT_DOSTOP; + tty->ctrl.pktstatus |= TIOCPKT_DOSTOP; else - tty->ctrl_status |= TIOCPKT_NOSTOP; + tty->ctrl.pktstatus |= TIOCPKT_NOSTOP; } if (extproc) - tty->ctrl_status |= TIOCPKT_IOCTL; - spin_unlock_irq(&tty->ctrl_lock); + tty->ctrl.pktstatus |= TIOCPKT_IOCTL; + spin_unlock_irq(&tty->ctrl.lock); wake_up_interruptible(&tty->link->read_wait); } } @@ -295,7 +282,7 @@ static void pty_set_termios(struct tty_struct *tty, } /** - * pty_do_resize - resize event + * pty_resize - resize event * @tty: tty being resized * @ws: window size being set. * @@ -346,11 +333,11 @@ static void pty_start(struct tty_struct *tty) { unsigned long flags; - if (tty->link && tty->link->packet) { - spin_lock_irqsave(&tty->ctrl_lock, flags); - tty->ctrl_status &= ~TIOCPKT_STOP; - tty->ctrl_status |= TIOCPKT_START; - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + if (tty->link && tty->link->ctrl.packet) { + spin_lock_irqsave(&tty->ctrl.lock, flags); + tty->ctrl.pktstatus &= ~TIOCPKT_STOP; + tty->ctrl.pktstatus |= TIOCPKT_START; + spin_unlock_irqrestore(&tty->ctrl.lock, flags); wake_up_interruptible_poll(&tty->link->read_wait, EPOLLIN); } } @@ -359,11 +346,11 @@ static void pty_stop(struct tty_struct *tty) { unsigned long flags; - if (tty->link && tty->link->packet) { - spin_lock_irqsave(&tty->ctrl_lock, flags); - tty->ctrl_status &= ~TIOCPKT_START; - tty->ctrl_status |= TIOCPKT_STOP; - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + if (tty->link && tty->link->ctrl.packet) { + spin_lock_irqsave(&tty->ctrl.lock, flags); + tty->ctrl.pktstatus &= ~TIOCPKT_START; + tty->ctrl.pktstatus |= TIOCPKT_STOP; + spin_unlock_irqrestore(&tty->ctrl.lock, flags); wake_up_interruptible_poll(&tty->link->read_wait, EPOLLIN); } } @@ -525,7 +512,6 @@ static const struct tty_operations master_pty_ops_bsd = { .write = pty_write, .write_room = pty_write_room, .flush_buffer = pty_flush_buffer, - .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .ioctl = pty_bsd_ioctl, .compat_ioctl = pty_bsd_compat_ioctl, @@ -541,7 +527,6 @@ static const struct tty_operations slave_pty_ops_bsd = { .write = pty_write, .write_room = pty_write_room, .flush_buffer = pty_flush_buffer, - .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .cleanup = pty_cleanup, @@ -626,7 +611,7 @@ static struct cdev ptmx_cdev; */ int ptm_open_peer(struct file *master, struct tty_struct *tty, int flags) { - int fd = -1; + int fd; struct file *filp; int retval = -EINVAL; struct path path; @@ -776,7 +761,6 @@ static const struct tty_operations ptm_unix98_ops = { .write = pty_write, .write_room = pty_write_room, .flush_buffer = pty_flush_buffer, - .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .ioctl = pty_unix98_ioctl, .compat_ioctl = pty_unix98_compat_ioctl, @@ -794,7 +778,6 @@ static const struct tty_operations pty_unix98_ops = { .write = pty_write, .write_room = pty_write_room, .flush_buffer = pty_flush_buffer, - .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .start = pty_start, diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c index aead0c0c9796..9cdfcfe07e87 100644 --- a/drivers/tty/serdev/core.c +++ b/drivers/tty/serdev/core.c @@ -798,7 +798,7 @@ void serdev_controller_remove(struct serdev_controller *ctrl) EXPORT_SYMBOL_GPL(serdev_controller_remove); /** - * serdev_driver_register() - Register client driver with serdev core + * __serdev_device_driver_register() - Register client driver with serdev core * @sdrv: client driver to be associated with client-device. * @owner: client driver owner to set. * diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index d035d08cb987..4caab8714e2c 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -34,7 +34,6 @@ struct aspeed_vuart { struct device *dev; - void __iomem *regs; struct clk *clk; int line; struct timer_list unthrottle_timer; @@ -64,14 +63,24 @@ static const int unthrottle_timeout = HZ/10; * different system (though most of them use 3f8/4). */ +static inline u8 aspeed_vuart_readb(struct aspeed_vuart *vuart, u8 reg) +{ + return readb(vuart->port->port.membase + reg); +} + +static inline void aspeed_vuart_writeb(struct aspeed_vuart *vuart, u8 val, u8 reg) +{ + writeb(val, vuart->port->port.membase + reg); +} + static ssize_t lpc_address_show(struct device *dev, struct device_attribute *attr, char *buf) { struct aspeed_vuart *vuart = dev_get_drvdata(dev); u16 addr; - addr = (readb(vuart->regs + ASPEED_VUART_ADDRH) << 8) | - (readb(vuart->regs + ASPEED_VUART_ADDRL)); + addr = (aspeed_vuart_readb(vuart, ASPEED_VUART_ADDRH) << 8) | + (aspeed_vuart_readb(vuart, ASPEED_VUART_ADDRL)); return snprintf(buf, PAGE_SIZE - 1, "0x%x\n", addr); } @@ -81,8 +90,8 @@ static int aspeed_vuart_set_lpc_address(struct aspeed_vuart *vuart, u32 addr) if (addr > U16_MAX) return -EINVAL; - writeb(addr >> 8, vuart->regs + ASPEED_VUART_ADDRH); - writeb(addr >> 0, vuart->regs + ASPEED_VUART_ADDRL); + aspeed_vuart_writeb(vuart, addr >> 8, ASPEED_VUART_ADDRH); + aspeed_vuart_writeb(vuart, addr >> 0, ASPEED_VUART_ADDRL); return 0; } @@ -111,7 +120,7 @@ static ssize_t sirq_show(struct device *dev, struct aspeed_vuart *vuart = dev_get_drvdata(dev); u8 reg; - reg = readb(vuart->regs + ASPEED_VUART_GCRB); + reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRB); reg &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK; reg >>= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT; @@ -128,10 +137,10 @@ static int aspeed_vuart_set_sirq(struct aspeed_vuart *vuart, u32 sirq) sirq <<= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT; sirq &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK; - reg = readb(vuart->regs + ASPEED_VUART_GCRB); + reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRB); reg &= ~ASPEED_VUART_GCRB_HOST_SIRQ_MASK; reg |= sirq; - writeb(reg, vuart->regs + ASPEED_VUART_GCRB); + aspeed_vuart_writeb(vuart, reg, ASPEED_VUART_GCRB); return 0; } @@ -159,7 +168,7 @@ static ssize_t sirq_polarity_show(struct device *dev, struct aspeed_vuart *vuart = dev_get_drvdata(dev); u8 reg; - reg = readb(vuart->regs + ASPEED_VUART_GCRA); + reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRA); reg &= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY; return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg ? 1 : 0); @@ -168,14 +177,14 @@ static ssize_t sirq_polarity_show(struct device *dev, static void aspeed_vuart_set_sirq_polarity(struct aspeed_vuart *vuart, bool polarity) { - u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA); + u8 reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRA); if (polarity) reg |= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY; else reg &= ~ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY; - writeb(reg, vuart->regs + ASPEED_VUART_GCRA); + aspeed_vuart_writeb(vuart, reg, ASPEED_VUART_GCRA); } static ssize_t sirq_polarity_store(struct device *dev, @@ -210,14 +219,14 @@ static const struct attribute_group aspeed_vuart_attr_group = { static void aspeed_vuart_set_enabled(struct aspeed_vuart *vuart, bool enabled) { - u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA); + u8 reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRA); if (enabled) reg |= ASPEED_VUART_GCRA_VUART_EN; else reg &= ~ASPEED_VUART_GCRA_VUART_EN; - writeb(reg, vuart->regs + ASPEED_VUART_GCRA); + aspeed_vuart_writeb(vuart, reg, ASPEED_VUART_GCRA); } static void aspeed_vuart_set_host_tx_discard(struct aspeed_vuart *vuart, @@ -225,7 +234,7 @@ static void aspeed_vuart_set_host_tx_discard(struct aspeed_vuart *vuart, { u8 reg; - reg = readb(vuart->regs + ASPEED_VUART_GCRA); + reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRA); /* If the DISABLE_HOST_TX_DISCARD bit is set, discard is disabled */ if (!discard) @@ -233,7 +242,7 @@ static void aspeed_vuart_set_host_tx_discard(struct aspeed_vuart *vuart, else reg &= ~ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD; - writeb(reg, vuart->regs + ASPEED_VUART_GCRA); + aspeed_vuart_writeb(vuart, reg, ASPEED_VUART_GCRA); } static int aspeed_vuart_startup(struct uart_port *uart_port) @@ -320,7 +329,7 @@ static int aspeed_vuart_handle_irq(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); unsigned int iir, lsr; - int space, count; + unsigned int space, count; iir = serial_port_in(port, UART_IIR); @@ -339,14 +348,12 @@ static int aspeed_vuart_handle_irq(struct uart_port *port) struct aspeed_vuart *vuart = port->private_data; __aspeed_vuart_set_throttle(up, true); - if (!timer_pending(&vuart->unthrottle_timer)) { - vuart->port = up; + if (!timer_pending(&vuart->unthrottle_timer)) mod_timer(&vuart->unthrottle_timer, jiffies + unthrottle_timeout); - } } else { - count = min(space, 256); + count = min(space, 256U); do { serial8250_read_char(up, lsr); @@ -421,13 +428,9 @@ static int aspeed_vuart_probe(struct platform_device *pdev) timer_setup(&vuart->unthrottle_timer, aspeed_vuart_unthrottle_exp, 0); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - vuart->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(vuart->regs)) - return PTR_ERR(vuart->regs); memset(&port, 0, sizeof(port)); port.port.private_data = vuart; - port.port.membase = vuart->regs; port.port.mapbase = res->start; port.port.mapsize = resource_size(res); port.port.startup = aspeed_vuart_startup; @@ -485,7 +488,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev) port.port.iotype = UPIO_MEM; port.port.type = PORT_16550A; port.port.uartclk = clk; - port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF + port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST; if (of_property_read_bool(np, "no-loopback-test")) @@ -502,6 +505,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev) goto err_clk_disable; vuart->line = rc; + vuart->port = serial8250_get_port(vuart->line); rc = of_parse_phandle_with_fixed_args( np, "aspeed,sirq-polarity-sense", 2, 0, diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index cae61d1ebec5..1ce193daea7f 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -172,7 +172,6 @@ static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) static int serial_link_irq_chain(struct uart_8250_port *up) { struct hlist_head *h; - struct hlist_node *n; struct irq_info *i; int ret; @@ -180,13 +179,11 @@ static int serial_link_irq_chain(struct uart_8250_port *up) h = &irq_lists[up->port.irq % NR_IRQ_HASH]; - hlist_for_each(n, h) { - i = hlist_entry(n, struct irq_info, node); + hlist_for_each_entry(i, h, node) if (i->irq == up->port.irq) break; - } - if (n == NULL) { + if (i == NULL) { i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); if (i == NULL) { mutex_unlock(&hash_mutex); @@ -220,25 +217,18 @@ static int serial_link_irq_chain(struct uart_8250_port *up) static void serial_unlink_irq_chain(struct uart_8250_port *up) { - /* - * yes, some broken gcc emit "warning: 'i' may be used uninitialized" - * but no, we are not going to take a patch that assigns NULL below. - */ struct irq_info *i; - struct hlist_node *n; struct hlist_head *h; mutex_lock(&hash_mutex); h = &irq_lists[up->port.irq % NR_IRQ_HASH]; - hlist_for_each(n, h) { - i = hlist_entry(n, struct irq_info, node); + hlist_for_each_entry(i, h, node) if (i->irq == up->port.irq) break; - } - BUG_ON(n == NULL); + BUG_ON(i == NULL); BUG_ON(i->head == NULL); if (list_empty(i->head)) @@ -331,9 +321,9 @@ static int univ8250_setup_irq(struct uart_8250_port *up) * hardware interrupt, we use a timer-based system. The original * driver used to do this with IRQ0. */ - if (!port->irq) { + if (!port->irq) mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); - } else + else retval = serial_link_irq_chain(up); return retval; @@ -762,6 +752,7 @@ void serial8250_suspend_port(int line) if (!console_suspend_enabled && uart_console(port) && port->type != PORT_8250) { unsigned char canary = 0xa5; + serial_out(up, UART_SCR, canary); if (serial_in(up, UART_SCR) == canary) up->canary = canary; @@ -915,7 +906,7 @@ static struct platform_device *serial8250_isa_devs; */ static DEFINE_MUTEX(serial_mutex); -static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) +static struct uart_8250_port *serial8250_find_match_or_unused(const struct uart_port *port) { int i; @@ -980,7 +971,7 @@ static void serial_8250_overrun_backoff_work(struct work_struct *work) * * On success the port is ready to use and the line number is returned. */ -int serial8250_register_8250_port(struct uart_8250_port *up) +int serial8250_register_8250_port(const struct uart_8250_port *up) { struct uart_8250_port *uart; int ret = -ENOSPC; diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index bd4e9f6ac29c..3ffeedc29c83 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -501,23 +501,27 @@ static const struct dmi_system_id exar_platforms[] = { {} }; +static const struct exar8250_platform *exar_get_platform(void) +{ + const struct dmi_system_id *dmi_match; + + dmi_match = dmi_first_match(exar_platforms); + if (dmi_match) + return dmi_match->driver_data; + + return &exar8250_default_platform; +} + static int pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, struct uart_8250_port *port, int idx) { - const struct exar8250_platform *platform; - const struct dmi_system_id *dmi_match; + const struct exar8250_platform *platform = exar_get_platform(); unsigned int offset = idx * 0x400; unsigned int baud = 7812500; u8 __iomem *p; int ret; - dmi_match = dmi_first_match(exar_platforms); - if (dmi_match) - platform = dmi_match->driver_data; - else - platform = &exar8250_default_platform; - port->port.uartclk = baud * 16; port->port.rs485_config = platform->rs485_config; diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 0b077b45d6a9..bce28729dd7b 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -192,6 +192,10 @@ static int of_platform_serial_probe(struct platform_device *ofdev) u32 tx_threshold; int ret; + if (IS_ENABLED(CONFIG_SERIAL_8250_BCM7271) && + of_device_is_compatible(ofdev->dev.of_node, "brcm,bcm7271-uart")) + return -ENODEV; + port_type = (unsigned long)of_device_get_match_data(&ofdev->dev); if (port_type == PORT_UNKNOWN) return -EINVAL; diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 8ac11eaeca51..79418d4beb48 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -43,6 +43,7 @@ #define UART_ERRATA_CLOCK_DISABLE (1 << 3) #define UART_HAS_EFR2 BIT(4) #define UART_HAS_RHR_IT_DIS BIT(5) +#define UART_RX_TIMEOUT_QUIRK BIT(6) #define OMAP_UART_FCR_RX_TRIG 6 #define OMAP_UART_FCR_TX_TRIG 4 @@ -104,6 +105,9 @@ #define UART_OMAP_EFR2 0x23 #define UART_OMAP_EFR2_TIMEOUT_BEHAVE BIT(6) +/* RX FIFO occupancy indicator */ +#define UART_OMAP_RX_LVL 0x64 + struct omap8250_priv { int line; u8 habit; @@ -611,6 +615,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port); static irqreturn_t omap8250_irq(int irq, void *dev_id) { struct uart_port *port = dev_id; + struct omap8250_priv *priv = port->private_data; struct uart_8250_port *up = up_to_u8250p(port); unsigned int iir; int ret; @@ -625,6 +630,18 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id) serial8250_rpm_get(up); iir = serial_port_in(port, UART_IIR); ret = serial8250_handle_irq(port, iir); + + /* + * On K3 SoCs, it is observed that RX TIMEOUT is signalled after + * FIFO has been drained, in which case a dummy read of RX FIFO + * is required to clear RX TIMEOUT condition. + */ + if (priv->habit & UART_RX_TIMEOUT_QUIRK && + (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT && + serial_port_in(port, UART_OMAP_RX_LVL) == 0) { + serial_port_in(port, UART_RX); + } + serial8250_rpm_put(up); return IRQ_RETVAL(ret); @@ -813,7 +830,7 @@ static void __dma_rx_do_complete(struct uart_8250_port *p) poll_count--) cpu_relax(); - if (!poll_count) + if (poll_count == -1) dev_err(p->port.dev, "teardown incomplete\n"); } } @@ -1218,7 +1235,8 @@ static struct omap8250_dma_params am33xx_dma = { static struct omap8250_platdata am654_platdata = { .dma_params = &am654_dma, - .habit = UART_HAS_EFR2 | UART_HAS_RHR_IT_DIS, + .habit = UART_HAS_EFR2 | UART_HAS_RHR_IT_DIS | + UART_RX_TIMEOUT_QUIRK, }; static struct omap8250_platdata am33xx_platdata = { diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 780cc99732b6..75827b608fdb 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -2851,7 +2851,7 @@ enum pci_board_num_t { pbn_b0_2_1843200, pbn_b0_4_1843200, - pbn_b0_1_4000000, + pbn_b0_1_3906250, pbn_b0_bt_1_115200, pbn_b0_bt_2_115200, @@ -2931,10 +2931,10 @@ enum pci_board_num_t { pbn_plx_romulus, pbn_endrun_2_4000000, pbn_oxsemi, - pbn_oxsemi_1_4000000, - pbn_oxsemi_2_4000000, - pbn_oxsemi_4_4000000, - pbn_oxsemi_8_4000000, + pbn_oxsemi_1_3906250, + pbn_oxsemi_2_3906250, + pbn_oxsemi_4_3906250, + pbn_oxsemi_8_3906250, pbn_intel_i960, pbn_sgi_ioc3, pbn_computone_4, @@ -2972,6 +2972,10 @@ enum pci_board_num_t { pbn_sunix_pci_4s, pbn_sunix_pci_8s, pbn_sunix_pci_16s, + pbn_titan_1_4000000, + pbn_titan_2_4000000, + pbn_titan_4_4000000, + pbn_titan_8_4000000, pbn_moxa8250_2p, pbn_moxa8250_4p, pbn_moxa8250_8p, @@ -3077,10 +3081,10 @@ static struct pciserial_board pci_boards[] = { .uart_offset = 8, }, - [pbn_b0_1_4000000] = { + [pbn_b0_1_3906250] = { .flags = FL_BASE0, .num_ports = 1, - .base_baud = 4000000, + .base_baud = 3906250, .uart_offset = 8, }, @@ -3475,31 +3479,31 @@ static struct pciserial_board pci_boards[] = { .base_baud = 115200, .uart_offset = 8, }, - [pbn_oxsemi_1_4000000] = { + [pbn_oxsemi_1_3906250] = { .flags = FL_BASE0, .num_ports = 1, - .base_baud = 4000000, + .base_baud = 3906250, .uart_offset = 0x200, .first_offset = 0x1000, }, - [pbn_oxsemi_2_4000000] = { + [pbn_oxsemi_2_3906250] = { .flags = FL_BASE0, .num_ports = 2, - .base_baud = 4000000, + .base_baud = 3906250, .uart_offset = 0x200, .first_offset = 0x1000, }, - [pbn_oxsemi_4_4000000] = { + [pbn_oxsemi_4_3906250] = { .flags = FL_BASE0, .num_ports = 4, - .base_baud = 4000000, + .base_baud = 3906250, .uart_offset = 0x200, .first_offset = 0x1000, }, - [pbn_oxsemi_8_4000000] = { + [pbn_oxsemi_8_3906250] = { .flags = FL_BASE0, .num_ports = 8, - .base_baud = 4000000, + .base_baud = 3906250, .uart_offset = 0x200, .first_offset = 0x1000, }, @@ -3759,6 +3763,34 @@ static struct pciserial_board pci_boards[] = { .base_baud = 921600, .uart_offset = 0x8, }, + [pbn_titan_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_titan_2_4000000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_titan_4_4000000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_titan_8_4000000] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, [pbn_moxa8250_2p] = { .flags = FL_BASE1, .num_ports = 2, @@ -4478,158 +4510,158 @@ static const struct pci_device_id serial_pci_tbl[] = { */ { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, + pbn_b0_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, + pbn_b0_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, + pbn_b0_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, + pbn_b0_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, + pbn_b0_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, + pbn_b0_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, + pbn_b0_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, + pbn_b0_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, + pbn_oxsemi_2_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, + pbn_oxsemi_2_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_4_4000000 }, + pbn_oxsemi_4_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_4_4000000 }, + pbn_oxsemi_4_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_8_4000000 }, + pbn_oxsemi_8_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_8_4000000 }, + pbn_oxsemi_8_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, /* * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado */ { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_oxsemi_1_3906250 }, { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, - pbn_oxsemi_2_4000000 }, + pbn_oxsemi_2_3906250 }, { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, - pbn_oxsemi_4_4000000 }, + pbn_oxsemi_4_3906250 }, { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, - pbn_oxsemi_8_4000000 }, + pbn_oxsemi_8_3906250 }, /* * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado */ { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM, PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, + pbn_oxsemi_2_3906250 }, /* * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, @@ -4703,22 +4735,22 @@ static const struct pci_device_id serial_pci_tbl[] = { pbn_b0_4_921600 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, + pbn_titan_1_4000000 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, + pbn_titan_2_4000000 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_4_4000000 }, + pbn_titan_4_4000000 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_8_4000000 }, + pbn_titan_8_4000000 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, + pbn_titan_2_4000000 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, + pbn_titan_2_4000000 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_921600 }, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index fc5ab2032282..2164290cbd31 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2512,19 +2512,45 @@ static unsigned int serial8250_do_get_divisor(struct uart_port *port, unsigned int baud, unsigned int *frac) { + upf_t magic_multiplier = port->flags & UPF_MAGIC_MULTIPLIER; struct uart_8250_port *up = up_to_u8250p(port); unsigned int quot; /* - * Handle magic divisors for baud rates above baud_base on - * SMSC SuperIO chips. + * Handle magic divisors for baud rates above baud_base on SMSC + * Super I/O chips. We clamp custom rates from clk/6 and clk/12 + * up to clk/4 (0x8001) and clk/8 (0x8002) respectively. These + * magic divisors actually reprogram the baud rate generator's + * reference clock derived from chips's 14.318MHz clock input. * + * Documentation claims that with these magic divisors the base + * frequencies of 7.3728MHz and 3.6864MHz are used respectively + * for the extra baud rates of 460800bps and 230400bps rather + * than the usual base frequency of 1.8462MHz. However empirical + * evidence contradicts that. + * + * Instead bit 7 of the DLM register (bit 15 of the divisor) is + * effectively used as a clock prescaler selection bit for the + * base frequency of 7.3728MHz, always used. If set to 0, then + * the base frequency is divided by 4 for use by the Baud Rate + * Generator, for the usual arrangement where the value of 1 of + * the divisor produces the baud rate of 115200bps. Conversely, + * if set to 1 and high-speed operation has been enabled with the + * Serial Port Mode Register in the Device Configuration Space, + * then the base frequency is supplied directly to the Baud Rate + * Generator, so for the divisor values of 0x8001, 0x8002, 0x8003, + * 0x8004, etc. the respective baud rates produced are 460800bps, + * 230400bps, 153600bps, 115200bps, etc. + * + * In all cases only low 15 bits of the divisor are used to divide + * the baud base and therefore 32767 is the maximum divisor value + * possible, even though documentation says that the programmable + * Baud Rate Generator is capable of dividing the internal PLL + * clock by any divisor from 1 to 65535. */ - if ((port->flags & UPF_MAGIC_MULTIPLIER) && - baud == (port->uartclk/4)) + if (magic_multiplier && baud >= port->uartclk / 6) quot = 0x8001; - else if ((port->flags & UPF_MAGIC_MULTIPLIER) && - baud == (port->uartclk/8)) + else if (magic_multiplier && baud >= port->uartclk / 12) quot = 0x8002; else if (up->port.type == PORT_NPCM) quot = npcm_get_divisor(up, baud); @@ -2629,6 +2655,21 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, struct ktermios *old) { unsigned int tolerance = port->uartclk / 100; + unsigned int min; + unsigned int max; + + /* + * Handle magic divisors for baud rates above baud_base on SMSC + * Super I/O chips. Enable custom rates of clk/4 and clk/8, but + * disable divisor values beyond 32767, which are unavailable. + */ + if (port->flags & UPF_MAGIC_MULTIPLIER) { + min = port->uartclk / 16 / UART_DIV_MAX >> 1; + max = (port->uartclk + tolerance) / 4; + } else { + min = port->uartclk / 16 / UART_DIV_MAX; + max = (port->uartclk + tolerance) / 16; + } /* * Ask the core to calculate the divisor for us. @@ -2636,9 +2677,7 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, * slower than nominal still match standard baud rates without * causing transmission errors. */ - return uart_get_baud_rate(port, termios, old, - port->uartclk / 16 / UART_DIV_MAX, - (port->uartclk + tolerance) / 16); + return uart_get_baud_rate(port, termios, old, min, max); } /* diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 63ea9c4da3d5..dc2ef05a10eb 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -306,6 +306,7 @@ static int serial_resume(struct pcmcia_device *link) static int serial_probe(struct pcmcia_device *link) { struct serial_info *info; + int ret; dev_dbg(&link->dev, "serial_attach()\n"); @@ -320,7 +321,15 @@ static int serial_probe(struct pcmcia_device *link) if (do_sound) link->config_flags |= CONF_ENABLE_SPKR; - return serial_config(link); + ret = serial_config(link); + if (ret) + goto free_info; + + return 0; + +free_info: + kfree(info); + return ret; } static void serial_detach(struct pcmcia_device *link) @@ -777,6 +786,7 @@ static const struct pcmcia_device_id serial_ids[] = { PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), + PCMCIA_DEVICE_PROD_ID12("Option International", "GSM-Ready 56K/ISDN", 0x9d7cd6f5, 0xb23844aa), PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), @@ -804,7 +814,6 @@ static const struct pcmcia_device_id serial_ids[] = { PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), - PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b), PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83), PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490), diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 682f9171c82c..24282ad99d85 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1553,6 +1553,7 @@ config SERIAL_LITEUART_CONSOLE bool "LiteUART serial port console support" depends on SERIAL_LITEUART=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON help Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial controller from LiteX SoC builder as the system console diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 78682c12156a..e14f3378b8a0 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1062,7 +1062,7 @@ static void pl011_dma_rx_poll(struct timer_list *t) struct tty_port *port = &uap->port.state->port; struct pl011_dmarx_data *dmarx = &uap->dmarx; struct dma_chan *rxchan = uap->dmarx.chan; - unsigned long flags = 0; + unsigned long flags; unsigned int dmataken = 0; unsigned int size = 0; struct pl011_sgbuf *sgbuf; diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index 1a9444b6b57e..596217d10d5c 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -149,7 +149,7 @@ static unsigned int arc_serial_tx_empty(struct uart_port *port) /* * Driver internal routine, used by both tty(serial core) as well as tx-isr * -Called under spinlock in either cases - * -also tty->stopped has already been checked + * -also tty->flow.stopped has already been checked * = by uart_start( ) before calling us * = tx_ist checks that too before calling */ diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 058886d9045b..249ea35088d2 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -30,9 +30,9 @@ #include #include #include +#include #include -#include #include #define PDC_BUFFER_SIZE 512 diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 58aaa533203b..c719aa2b1832 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -524,24 +524,7 @@ static void cpm_uart_set_termios(struct uart_port *port, scval = 0; /* byte size */ - switch (termios->c_cflag & CSIZE) { - case CS5: - bits = 5; - break; - case CS6: - bits = 6; - break; - case CS7: - bits = 7; - break; - case CS8: - bits = 8; - break; - /* Never happens, but GCC is too dumb to figure it out */ - default: - bits = 8; - break; - } + bits = tty_get_char_size(termios->c_cflag); sbits = bits - 5; if (termios->c_cflag & CSTOPB) { diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c index 4552742c3859..e9edabc5a211 100644 --- a/drivers/tty/serial/dz.c +++ b/drivers/tty/serial/dz.c @@ -47,8 +47,8 @@ #include #include +#include #include -#include #include #include @@ -115,7 +115,7 @@ static void dz_out(struct dz_port *dport, unsigned offset, u16 value) * rs_stop () and rs_start () * * These routines are called before setting or resetting - * tty->stopped. They enable or disable transmitter interrupts, + * tty->flow.stopped. They enable or disable transmitter interrupts, * as necessary. * ------------------------------------------------------------ */ diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 794035041744..508128ddfa01 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -824,21 +824,18 @@ static unsigned int lpuart32_tx_empty(struct uart_port *port) static void lpuart_txint(struct lpuart_port *sport) { - unsigned long flags; - - spin_lock_irqsave(&sport->port.lock, flags); + spin_lock(&sport->port.lock); lpuart_transmit_buffer(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); + spin_unlock(&sport->port.lock); } static void lpuart_rxint(struct lpuart_port *sport) { unsigned int flg, ignored = 0, overrun = 0; struct tty_port *port = &sport->port.state->port; - unsigned long flags; unsigned char rx, sr; - spin_lock_irqsave(&sport->port.lock, flags); + spin_lock(&sport->port.lock); while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) { flg = TTY_NORMAL; @@ -850,7 +847,7 @@ static void lpuart_rxint(struct lpuart_port *sport) sr = readb(sport->port.membase + UARTSR1); rx = readb(sport->port.membase + UARTDR); - if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) + if (uart_prepare_sysrq_char(&sport->port, rx)) continue; if (sr & (UARTSR1_PE | UARTSR1_OR | UARTSR1_FE)) { @@ -896,28 +893,26 @@ out: writeb(UARTSFIFO_RXOF, sport->port.membase + UARTSFIFO); } - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_unlock_and_check_sysrq(&sport->port); tty_flip_buffer_push(port); } static void lpuart32_txint(struct lpuart_port *sport) { - unsigned long flags; - - spin_lock_irqsave(&sport->port.lock, flags); + spin_lock(&sport->port.lock); lpuart32_transmit_buffer(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); + spin_unlock(&sport->port.lock); } static void lpuart32_rxint(struct lpuart_port *sport) { unsigned int flg, ignored = 0; struct tty_port *port = &sport->port.state->port; - unsigned long flags; unsigned long rx, sr; + bool is_break; - spin_lock_irqsave(&sport->port.lock, flags); + spin_lock(&sport->port.lock); while (!(lpuart32_read(&sport->port, UARTFIFO) & UARTFIFO_RXEMPT)) { flg = TTY_NORMAL; @@ -928,16 +923,29 @@ static void lpuart32_rxint(struct lpuart_port *sport) */ sr = lpuart32_read(&sport->port, UARTSTAT); rx = lpuart32_read(&sport->port, UARTDATA); - rx &= 0x3ff; + rx &= UARTDATA_MASK; - if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) + /* + * The LPUART can't distinguish between a break and a framing error, + * thus we assume it is a break if the received data is zero. + */ + is_break = (sr & UARTSTAT_FE) && !rx; + + if (is_break && uart_handle_break(&sport->port)) + continue; + + if (uart_prepare_sysrq_char(&sport->port, rx)) continue; if (sr & (UARTSTAT_PE | UARTSTAT_OR | UARTSTAT_FE)) { - if (sr & UARTSTAT_PE) - sport->port.icount.parity++; - else if (sr & UARTSTAT_FE) + if (sr & UARTSTAT_PE) { + if (is_break) + sport->port.icount.brk++; + else + sport->port.icount.parity++; + } else if (sr & UARTSTAT_FE) { sport->port.icount.frame++; + } if (sr & UARTSTAT_OR) sport->port.icount.overrun++; @@ -950,22 +958,24 @@ static void lpuart32_rxint(struct lpuart_port *sport) sr &= sport->port.read_status_mask; - if (sr & UARTSTAT_PE) - flg = TTY_PARITY; - else if (sr & UARTSTAT_FE) + if (sr & UARTSTAT_PE) { + if (is_break) + flg = TTY_BREAK; + else + flg = TTY_PARITY; + } else if (sr & UARTSTAT_FE) { flg = TTY_FRAME; + } if (sr & UARTSTAT_OR) flg = TTY_OVERRUN; - - sport->port.sysrq = 0; } tty_insert_flip_char(port, rx, flg); } out: - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_unlock_and_check_sysrq(&sport->port); tty_flip_buffer_push(port); } @@ -1393,58 +1403,54 @@ static int lpuart32_config_rs485(struct uart_port *port, static unsigned int lpuart_get_mctrl(struct uart_port *port) { - unsigned int temp = 0; - unsigned char reg; + unsigned int mctrl = 0; + u8 reg; - reg = readb(port->membase + UARTMODEM); - if (reg & UARTMODEM_TXCTSE) - temp |= TIOCM_CTS; + reg = readb(port->membase + UARTCR1); + if (reg & UARTCR1_LOOPS) + mctrl |= TIOCM_LOOP; - if (reg & UARTMODEM_RXRTSE) - temp |= TIOCM_RTS; - - return temp; + return mctrl; } static unsigned int lpuart32_get_mctrl(struct uart_port *port) { - unsigned int temp = 0; - unsigned long reg; + unsigned int mctrl = 0; + u32 reg; - reg = lpuart32_read(port, UARTMODIR); - if (reg & UARTMODIR_TXCTSE) - temp |= TIOCM_CTS; + reg = lpuart32_read(port, UARTCTRL); + if (reg & UARTCTRL_LOOPS) + mctrl |= TIOCM_LOOP; - if (reg & UARTMODIR_RXRTSE) - temp |= TIOCM_RTS; - - return temp; + return mctrl; } static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl) { - unsigned char temp; - struct lpuart_port *sport = container_of(port, - struct lpuart_port, port); + u8 reg; - /* Make sure RXRTSE bit is not set when RS485 is enabled */ - if (!(sport->port.rs485.flags & SER_RS485_ENABLED)) { - temp = readb(sport->port.membase + UARTMODEM) & - ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + reg = readb(port->membase + UARTCR1); - if (mctrl & TIOCM_RTS) - temp |= UARTMODEM_RXRTSE; + /* for internal loopback we need LOOPS=1 and RSRC=0 */ + reg &= ~(UARTCR1_LOOPS | UARTCR1_RSRC); + if (mctrl & TIOCM_LOOP) + reg |= UARTCR1_LOOPS; - if (mctrl & TIOCM_CTS) - temp |= UARTMODEM_TXCTSE; - - writeb(temp, port->membase + UARTMODEM); - } + writeb(reg, port->membase + UARTCR1); } static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl) { + u32 reg; + reg = lpuart32_read(port, UARTCTRL); + + /* for internal loopback we need LOOPS=1 and RSRC=0 */ + reg &= ~(UARTCTRL_LOOPS | UARTCTRL_RSRC); + if (mctrl & TIOCM_LOOP) + reg |= UARTCTRL_LOOPS; + + lpuart32_write(port, reg, UARTCTRL); } static void lpuart_break_ctl(struct uart_port *port, int break_state) @@ -1581,6 +1587,9 @@ static void lpuart_tx_dma_startup(struct lpuart_port *sport) u32 uartbaud; int ret; + if (uart_console(&sport->port)) + goto err; + if (!sport->dma_tx_chan) goto err; @@ -1610,6 +1619,9 @@ static void lpuart_rx_dma_startup(struct lpuart_port *sport) int ret; unsigned char cr3; + if (uart_console(&sport->port)) + goto err; + if (!sport->dma_rx_chan) goto err; @@ -1625,7 +1637,7 @@ static void lpuart_rx_dma_startup(struct lpuart_port *sport) sport->lpuart_dma_rx_use = true; rx_dma_timer_init(sport); - if (sport->port.has_sysrq) { + if (sport->port.has_sysrq && !lpuart_is_32(sport)) { cr3 = readb(sport->port.membase + UARTCR3); cr3 |= UARTCR3_FEIE; writeb(cr3, sport->port.membase + UARTCR3); @@ -2278,7 +2290,7 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count) unsigned long flags; int locked = 1; - if (sport->port.sysrq || oops_in_progress) + if (oops_in_progress) locked = spin_trylock_irqsave(&sport->port.lock, flags); else spin_lock_irqsave(&sport->port.lock, flags); @@ -2308,7 +2320,7 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count) unsigned long flags; int locked = 1; - if (sport->port.sysrq || oops_in_progress) + if (oops_in_progress) locked = spin_trylock_irqsave(&sport->port.lock, flags); else spin_lock_irqsave(&sport->port.lock, flags); @@ -2414,6 +2426,9 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud, bd = lpuart32_read(&sport->port, UARTBAUD); bd &= UARTBAUD_SBR_MASK; + if (!bd) + return; + sbr = bd; uartclk = lpuart_get_baud_clk_rate(sport); /* diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index 9e9abfc4824a..03a2fe9f4c9a 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -37,7 +37,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 7d5a8dfa3e91..8b121cd869e9 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -225,6 +225,8 @@ struct imx_port { struct scatterlist rx_sgl, tx_sgl[2]; void *rx_buf; struct circ_buf rx_ring; + unsigned int rx_buf_size; + unsigned int rx_period_length; unsigned int rx_periods; dma_cookie_t rx_cookie; unsigned int tx_bytes; @@ -1183,10 +1185,6 @@ static void imx_uart_dma_rx_callback(void *data) } } -/* RX DMA buffer periods */ -#define RX_DMA_PERIODS 16 -#define RX_BUF_SIZE (RX_DMA_PERIODS * PAGE_SIZE / 4) - static int imx_uart_start_rx_dma(struct imx_port *sport) { struct scatterlist *sgl = &sport->rx_sgl; @@ -1197,9 +1195,8 @@ static int imx_uart_start_rx_dma(struct imx_port *sport) sport->rx_ring.head = 0; sport->rx_ring.tail = 0; - sport->rx_periods = RX_DMA_PERIODS; - sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE); + sg_init_one(sgl, sport->rx_buf, sport->rx_buf_size); ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE); if (ret == 0) { dev_err(dev, "DMA mapping error for RX.\n"); @@ -1316,7 +1313,8 @@ static int imx_uart_dma_init(struct imx_port *sport) goto err; } - sport->rx_buf = kzalloc(RX_BUF_SIZE, GFP_KERNEL); + sport->rx_buf_size = sport->rx_period_length * sport->rx_periods; + sport->rx_buf = kzalloc(sport->rx_buf_size, GFP_KERNEL); if (!sport->rx_buf) { ret = -ENOMEM; goto err; @@ -1975,8 +1973,8 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count) { struct imx_port *sport = imx_uart_ports[co->index]; struct imx_port_ucrs old_ucr; + unsigned long flags; unsigned int ucr1; - unsigned long flags = 0; int locked = 1; if (sport->port.sysrq) @@ -2179,11 +2177,16 @@ static enum hrtimer_restart imx_trigger_stop_tx(struct hrtimer *t) return HRTIMER_NORESTART; } +/* Default RX DMA buffer configuration */ +#define RX_DMA_PERIODS 16 +#define RX_DMA_PERIOD_LEN (PAGE_SIZE / 4) + static int imx_uart_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct imx_port *sport; void __iomem *base; + u32 dma_buf_conf[2]; int ret = 0; u32 ucr1; struct resource *res; @@ -2218,6 +2221,14 @@ static int imx_uart_probe(struct platform_device *pdev) if (of_get_property(np, "fsl,inverted-rx", NULL)) sport->inverted_rx = 1; + if (!of_property_read_u32_array(np, "fsl,dma-info", dma_buf_conf, 2)) { + sport->rx_period_length = dma_buf_conf[0]; + sport->rx_periods = dma_buf_conf[1]; + } else { + sport->rx_period_length = RX_DMA_PERIOD_LEN; + sport->rx_periods = RX_DMA_PERIODS; + } + if (sport->port.line >= ARRAY_SIZE(imx_uart_ports)) { dev_err(&pdev->dev, "serial%d out of range\n", sport->port.line); diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c index 86fff69d7e7c..f4dc5fe4ba92 100644 --- a/drivers/tty/serial/ip22zilog.c +++ b/drivers/tty/serial/ip22zilog.c @@ -31,7 +31,7 @@ #include #include -#include +#include #include #include #include diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c index db059b66438e..3e7c6ee8e4b3 100644 --- a/drivers/tty/serial/kgdb_nmi.c +++ b/drivers/tty/serial/kgdb_nmi.c @@ -115,7 +115,7 @@ static void kgdb_tty_recv(int ch) static int kgdb_nmi_poll_one_knock(void) { static int n; - int c = -1; + int c; const char *magic = kgdb_nmi_magic; size_t m = strlen(magic); bool printch = false; @@ -298,7 +298,7 @@ static void kgdb_nmi_tty_hangup(struct tty_struct *tty) tty_port_hangup(&priv->port); } -static int kgdb_nmi_tty_write_room(struct tty_struct *tty) +static unsigned int kgdb_nmi_tty_write_room(struct tty_struct *tty) { /* Actually, we can handle any amount as we use polled writes. */ return 2048; diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c index 0b06770642cb..dbc0559a9157 100644 --- a/drivers/tty/serial/liteuart.c +++ b/drivers/tty/serial/liteuart.c @@ -370,6 +370,27 @@ static int __init liteuart_console_init(void) return 0; } console_initcall(liteuart_console_init); + +static void early_liteuart_write(struct console *console, const char *s, + unsigned int count) +{ + struct earlycon_device *device = console->data; + struct uart_port *port = &device->port; + + uart_console_write(port, s, count, liteuart_putchar); +} + +static int __init early_liteuart_setup(struct earlycon_device *device, + const char *options) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = early_liteuart_write; + return 0; +} + +OF_EARLYCON_DECLARE(liteuart, "litex,liteuart", early_liteuart_setup); #endif /* CONFIG_SERIAL_LITEUART_CONSOLE */ static int __init liteuart_init(void) diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 3cbc757d7be7..0c1e4df52215 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -552,7 +552,7 @@ static int max310x_update_best_err(unsigned long f, long *besterr) return 1; } -static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s, +static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s, unsigned long freq, bool xtal) { unsigned int div, clksrc, pllcfg = 0; @@ -618,7 +618,7 @@ static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s, } } - return (int)bestfreq; + return bestfreq; } static void max310x_batch_write(struct uart_port *port, u8 *txbuf, unsigned int len) @@ -1253,9 +1253,10 @@ static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset, static int max310x_probe(struct device *dev, const struct max310x_devtype *devtype, struct regmap *regmap, int irq) { - int i, ret, fmin, fmax, freq, uartclk; + int i, ret, fmin, fmax, freq; struct max310x_port *s; - bool xtal = false; + u32 uartclk = 0; + bool xtal; if (IS_ERR(regmap)) return PTR_ERR(regmap); @@ -1267,24 +1268,20 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty return -ENOMEM; } + /* Always ask for fixed clock rate from a property. */ + device_property_read_u32(dev, "clock-frequency", &uartclk); + s->clk = devm_clk_get_optional(dev, "osc"); if (IS_ERR(s->clk)) return PTR_ERR(s->clk); if (s->clk) { - fmin = 500000; - fmax = 35000000; + xtal = false; } else { s->clk = devm_clk_get_optional(dev, "xtal"); if (IS_ERR(s->clk)) return PTR_ERR(s->clk); - if (s->clk) { - fmin = 1000000; - fmax = 4000000; - xtal = true; - } else { - dev_err(dev, "Cannot get clock\n"); - return -EINVAL; - } + + xtal = true; } ret = clk_prepare_enable(s->clk); @@ -1292,6 +1289,21 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty return ret; freq = clk_get_rate(s->clk); + if (freq == 0) + freq = uartclk; + if (freq == 0) { + dev_err(dev, "Cannot get clock rate\n"); + return -EINVAL; + } + + if (xtal) { + fmin = 1000000; + fmax = 4000000; + } else { + fmin = 500000; + fmax = 35000000; + } + /* Check frequency limits */ if (freq < fmin || freq > fmax) { ret = -ERANGE; diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 529cd0289056..efee3935917f 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -715,13 +715,15 @@ static int meson_uart_probe(struct platform_device *pdev) { struct resource *res_mem, *res_irq; struct uart_port *port; + u32 fifosize = 64; /* Default is 64, 128 for EE UART_0 */ int ret = 0; - int id = -1; if (pdev->dev.of_node) pdev->id = of_alias_get_id(pdev->dev.of_node, "serial"); if (pdev->id < 0) { + int id; + for (id = AML_UART_PORT_OFFSET; id < AML_UART_PORT_NUM; id++) { if (!meson_ports[id]) { pdev->id = id; @@ -741,6 +743,8 @@ static int meson_uart_probe(struct platform_device *pdev) if (!res_irq) return -ENODEV; + of_property_read_u32(pdev->dev.of_node, "fifo-size", &fifosize); + if (meson_ports[pdev->id]) { dev_err(&pdev->dev, "port %d already allocated\n", pdev->id); return -EBUSY; @@ -770,7 +774,7 @@ static int meson_uart_probe(struct platform_device *pdev) port->type = PORT_MESON; port->x_char = 0; port->ops = &meson_uart_ops; - port->fifosize = 64; + port->fifosize = fifosize; meson_ports[pdev->id] = port; platform_set_drvdata(pdev, port); diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c index 47ab280f553b..be640d9863cd 100644 --- a/drivers/tty/serial/mux.c +++ b/drivers/tty/serial/mux.c @@ -21,7 +21,7 @@ #include #include /* for udelay */ #include -#include +#include #include #include diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 51b0ecabf2ec..231de29a6452 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -128,7 +128,6 @@ struct mvebu_uart { struct uart_port *port; struct clk *clk; int irq[UART_IRQ_COUNT]; - unsigned char __iomem *nb; struct mvebu_uart_driver_data *data; #if defined(CONFIG_PM) struct mvebu_uart_pm_regs pm_regs; @@ -445,12 +444,11 @@ static void mvebu_uart_shutdown(struct uart_port *port) static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) { - struct mvebu_uart *mvuart = to_mvuart(port); unsigned int d_divisor, m_divisor; u32 brdv, osamp; - if (IS_ERR(mvuart->clk)) - return -PTR_ERR(mvuart->clk); + if (!port->uartclk) + return -EOPNOTSUPP; /* * The baudrate is derived from the UART clock thanks to two divisors: @@ -463,7 +461,7 @@ static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) * makes use of D to configure the desired baudrate. */ m_divisor = OSAMP_DEFAULT_DIVISOR; - d_divisor = DIV_ROUND_UP(port->uartclk, baud * m_divisor); + d_divisor = DIV_ROUND_CLOSEST(port->uartclk, baud * m_divisor); brdv = readl(port->membase + UART_BRDV); brdv &= ~BRDV_BAUD_MASK; @@ -482,7 +480,7 @@ static void mvebu_uart_set_termios(struct uart_port *port, struct ktermios *old) { unsigned long flags; - unsigned int baud; + unsigned int baud, min_baud, max_baud; spin_lock_irqsave(&port->lock, flags); @@ -501,16 +499,21 @@ static void mvebu_uart_set_termios(struct uart_port *port, port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR; /* + * Maximal divisor is 1023 * 16 when using default (x16) scheme. * Maximum achievable frequency with simple baudrate divisor is 230400. * Since the error per bit frame would be of more than 15%, achieving * higher frequencies would require to implement the fractional divisor * feature. */ - baud = uart_get_baud_rate(port, termios, old, 0, 230400); + min_baud = DIV_ROUND_UP(port->uartclk, 1023 * 16); + max_baud = 230400; + + baud = uart_get_baud_rate(port, termios, old, min_baud, max_baud); if (mvebu_uart_baud_rate_set(port, baud)) { /* No clock available, baudrate cannot be changed */ if (old) - baud = uart_get_baud_rate(port, old, NULL, 0, 230400); + baud = uart_get_baud_rate(port, old, NULL, + min_baud, max_baud); } else { tty_termios_encode_baud_rate(termios, baud, baud); uart_update_timeout(port, termios->c_cflag, baud); @@ -617,7 +620,7 @@ static void mvebu_uart_putc(struct uart_port *port, int c) static void mvebu_uart_putc_early_write(struct console *con, const char *s, - unsigned n) + unsigned int n) { struct earlycon_device *dev = con->data; diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index f414d6acad69..ac45f3386e97 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -87,7 +87,7 @@ #define AUART_LINECTRL_BAUD_DIVFRAC(v) (((v) & 0x3f) << 8) #define AUART_LINECTRL_SPS (1 << 7) #define AUART_LINECTRL_WLEN_MASK 0x00000060 -#define AUART_LINECTRL_WLEN(v) (((v) & 0x3) << 5) +#define AUART_LINECTRL_WLEN(v) ((((v) - 5) & 0x3) << 5) #define AUART_LINECTRL_FEN (1 << 4) #define AUART_LINECTRL_STP2 (1 << 3) #define AUART_LINECTRL_EPS (1 << 2) @@ -962,7 +962,7 @@ static void mxs_auart_settermios(struct uart_port *u, struct ktermios *old) { struct mxs_auart_port *s = to_auart_port(u); - u32 bm, ctrl, ctrl2, div; + u32 ctrl, ctrl2, div; unsigned int cflag, baud, baud_min, baud_max; cflag = termios->c_cflag; @@ -970,25 +970,7 @@ static void mxs_auart_settermios(struct uart_port *u, ctrl = AUART_LINECTRL_FEN; ctrl2 = mxs_read(s, REG_CTRL2); - /* byte size */ - switch (cflag & CSIZE) { - case CS5: - bm = 0; - break; - case CS6: - bm = 1; - break; - case CS7: - bm = 2; - break; - case CS8: - bm = 3; - break; - default: - return; - } - - ctrl |= AUART_LINECTRL_WLEN(bm); + ctrl |= AUART_LINECTRL_WLEN(tty_get_char_size(cflag)); /* parity */ if (cflag & PARENB) { @@ -1403,7 +1385,7 @@ auart_console_get_options(struct mxs_auart_port *s, int *baud, *parity = 'o'; } - if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(2)) + if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(7)) *bits = 7; else *bits = 8; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 84e8158088cd..9e81b09ba08e 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -626,7 +626,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id) static unsigned int serial_omap_tx_empty(struct uart_port *port) { struct uart_omap_port *up = to_uart_omap_port(port); - unsigned long flags = 0; + unsigned long flags; unsigned int ret = 0; pm_runtime_get_sync(up->dev); @@ -704,7 +704,7 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) static void serial_omap_break_ctl(struct uart_port *port, int break_state) { struct uart_omap_port *up = to_uart_omap_port(port); - unsigned long flags = 0; + unsigned long flags; dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line); pm_runtime_get_sync(up->dev); @@ -722,7 +722,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state) static int serial_omap_startup(struct uart_port *port) { struct uart_omap_port *up = to_uart_omap_port(port); - unsigned long flags = 0; + unsigned long flags; int retval; /* @@ -797,7 +797,7 @@ static int serial_omap_startup(struct uart_port *port) static void serial_omap_shutdown(struct uart_port *port) { struct uart_omap_port *up = to_uart_omap_port(port); - unsigned long flags = 0; + unsigned long flags; dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line); @@ -845,7 +845,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, { struct uart_omap_port *up = to_uart_omap_port(port); unsigned char cval = 0; - unsigned long flags = 0; + unsigned long flags; unsigned int baud, quot; switch (termios->c_cflag & CSIZE) { diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index d6aef8a1f0a4..12ce150b0ad4 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -47,7 +47,7 @@ #include #include #include -#include +#include #include #ifdef CONFIG_PPC_PMAC diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 23d729ed3bf6..aedc38893e6c 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1050,21 +1050,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, } /* bits per char */ - switch (termios->c_cflag & CSIZE) { - case CS5: - bits_per_char = 5; - break; - case CS6: - bits_per_char = 6; - break; - case CS7: - bits_per_char = 7; - break; - case CS8: - default: - bits_per_char = 8; - break; - } + bits_per_char = tty_get_char_size(termios->c_cflag); /* stop bits */ if (termios->c_cflag & CSTOPB) @@ -1338,7 +1324,7 @@ static const struct uart_ops qcom_geni_uart_pops = { static int qcom_geni_serial_probe(struct platform_device *pdev) { int ret = 0; - int line = -1; + int line; struct qcom_geni_serial_port *port; struct uart_port *uport; struct resource *res; @@ -1354,7 +1340,9 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) line = of_alias_get_id(pdev->dev.of_node, "serial"); } else { drv = &qcom_geni_uart_driver; - line = of_alias_get_id(pdev->dev.of_node, "hsuart"); + line = of_alias_get_id(pdev->dev.of_node, "serial"); + if (line == -ENODEV) /* compat with non-standard aliases */ + line = of_alias_get_id(pdev->dev.of_node, "hsuart"); } port = get_port_from_line(line, console); diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index d9e4b67a12a0..9fbc61151c2e 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -2220,8 +2220,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) default: dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n", prop); - ret = -EINVAL; - break; + return -EINVAL; } } } diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c index 22c7bc90b104..738df6d9c0d9 100644 --- a/drivers/tty/serial/sb1250-duart.c +++ b/drivers/tty/serial/sb1250-duart.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 9adb8362578c..acbb615dd28f 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1208,8 +1208,16 @@ static int sc16is7xx_probe(struct device *dev, /* Always ask for fixed clock rate from a property. */ device_property_read_u32(dev, "clock-frequency", &uartclk); - s->clk = devm_clk_get(dev, NULL); - if (IS_ERR(s->clk)) { + s->clk = devm_clk_get_optional(dev, NULL); + if (IS_ERR(s->clk)) + return PTR_ERR(s->clk); + + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; + + freq = clk_get_rate(s->clk); + if (freq == 0) { if (uartclk) freq = uartclk; if (pfreq) @@ -1217,13 +1225,7 @@ static int sc16is7xx_probe(struct device *dev, if (freq) dev_dbg(dev, "Clock frequency: %luHz\n", freq); else - return PTR_ERR(s->clk); - } else { - ret = clk_prepare_enable(s->clk); - if (ret) - return ret; - - freq = clk_get_rate(s->clk); + return -EINVAL; } s->regmap = regmap; @@ -1358,8 +1360,7 @@ out_thread: kthread_stop(s->kworker_task); out_clk: - if (!IS_ERR(s->clk)) - clk_disable_unprepare(s->clk); + clk_disable_unprepare(s->clk); return ret; } @@ -1383,8 +1384,7 @@ static int sc16is7xx_remove(struct device *dev) kthread_flush_worker(&s->kworker); kthread_stop(s->kworker_task); - if (!IS_ERR(s->clk)) - clk_disable_unprepare(s->clk); + clk_disable_unprepare(s->clk); return 0; } diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 18ff85a83f80..69092deba11f 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -184,8 +184,8 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, int init_hw) { struct uart_port *uport = uart_port_check(state); + unsigned long flags; unsigned long page; - unsigned long flags = 0; int retval = 0; if (uport->type == PORT_UNKNOWN) @@ -275,7 +275,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) { struct uart_port *uport = uart_port_check(state); struct tty_port *port = &state->port; - unsigned long flags = 0; + unsigned long flags; char *xmit_buf = NULL; /* @@ -334,39 +334,15 @@ void uart_update_timeout(struct uart_port *port, unsigned int cflag, unsigned int baud) { - unsigned int bits; + unsigned int size; - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - bits = 7; - break; - case CS6: - bits = 8; - break; - case CS7: - bits = 9; - break; - default: - bits = 10; - break; /* CS8 */ - } - - if (cflag & CSTOPB) - bits++; - if (cflag & PARENB) - bits++; - - /* - * The total number of bits to be transmitted in the fifo. - */ - bits = bits * port->fifosize; + size = tty_get_frame_size(cflag) * port->fifosize; /* * Figure the timeout to send the above number of bits. * Add .02 seconds of slop */ - port->timeout = (HZ * bits) / baud + HZ/50; + port->timeout = (HZ * size) / baud + HZ/50; } EXPORT_SYMBOL(uart_update_timeout); @@ -616,12 +592,12 @@ static int uart_write(struct tty_struct *tty, return ret; } -static int uart_write_room(struct tty_struct *tty) +static unsigned int uart_write_room(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct uart_port *port; unsigned long flags; - int ret; + unsigned int ret; port = uart_port_lock(state, flags); ret = uart_circ_chars_free(&state->xmit); @@ -629,12 +605,12 @@ static int uart_write_room(struct tty_struct *tty) return ret; } -static int uart_chars_in_buffer(struct tty_struct *tty) +static unsigned int uart_chars_in_buffer(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct uart_port *port; unsigned long flags; - int ret; + unsigned int ret; port = uart_port_lock(state, flags); ret = uart_circ_chars_pending(&state->xmit); @@ -3029,26 +3005,28 @@ out: /* * Are the two ports equivalent? */ -int uart_match_port(struct uart_port *port1, struct uart_port *port2) +bool uart_match_port(const struct uart_port *port1, + const struct uart_port *port2) { if (port1->iotype != port2->iotype) - return 0; + return false; switch (port1->iotype) { case UPIO_PORT: - return (port1->iobase == port2->iobase); + return port1->iobase == port2->iobase; case UPIO_HUB6: - return (port1->iobase == port2->iobase) && - (port1->hub6 == port2->hub6); + return port1->iobase == port2->iobase && + port1->hub6 == port2->hub6; case UPIO_MEM: case UPIO_MEM16: case UPIO_MEM32: case UPIO_MEM32BE: case UPIO_AU: case UPIO_TSI: - return (port1->mapbase == port2->mapbase); + return port1->mapbase == port2->mapbase; } - return 0; + + return false; } EXPORT_SYMBOL(uart_match_port); diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index 0a7e5b74bc1d..aaca4fe38486 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -24,7 +24,7 @@ #include #include -#include +#include static char *serial_version = "1.11"; static char *serial_name = "TX39/49 Serial driver"; diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 4baf1316ea72..07eb56294371 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -289,7 +289,7 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = { }, /* - * The "SCIFA" that is in RZ/T and RZ/A2. + * The "SCIFA" that is in RZ/A2, RZ/G2L and RZ/T. * It looks like a normal SCIF with FIFO data, but with a * compressed address space. Also, the break out of interrupts * are different: ERI/BRI, RXI, TXI, TEI, DRI. @@ -306,6 +306,7 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = { [SCFDR] = { 0x0E, 16 }, [SCSPTR] = { 0x10, 16 }, [SCLSR] = { 0x12, 16 }, + [SEMR] = { 0x14, 8 }, }, .fifosize = 16, .overrun_reg = SCLSR, @@ -610,6 +611,14 @@ static void sci_stop_tx(struct uart_port *port) ctrl &= ~SCSCR_TIE; serial_port_out(port, SCSCR, ctrl); + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + if (to_sci_port(port)->chan_tx && + !dma_submit_error(to_sci_port(port)->cookie_tx)) { + dmaengine_terminate_async(to_sci_port(port)->chan_tx); + to_sci_port(port)->cookie_tx = -EINVAL; + } +#endif } static void sci_start_rx(struct uart_port *port) @@ -840,9 +849,6 @@ static void sci_transmit_chars(struct uart_port *port) } -/* On SH3, SCIF may read end-of-break as a space->mark char */ -#define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); }) - static void sci_receive_chars(struct uart_port *port) { struct tty_port *tport = &port->state->port; @@ -2494,25 +2500,10 @@ done: uart_update_timeout(port, termios->c_cflag, baud); /* byte size and parity */ - switch (termios->c_cflag & CSIZE) { - case CS5: - bits = 7; - break; - case CS6: - bits = 8; - break; - case CS7: - bits = 9; - break; - default: - bits = 10; - break; - } + bits = tty_get_frame_size(termios->c_cflag); - if (termios->c_cflag & CSTOPB) - bits++; - if (termios->c_cflag & PARENB) - bits++; + if (sci_getreg(port, SEMR)->size) + serial_port_out(port, SEMR, 0); if (best_clk >= 0) { if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) @@ -3170,6 +3161,10 @@ static const struct of_device_id of_sci_match[] = { .compatible = "renesas,scif-r7s9210", .data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE), }, + { + .compatible = "renesas,scif-r9a07g044", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE), + }, /* Family-specific types */ { .compatible = "renesas,rcar-gen1-scif", @@ -3452,6 +3447,7 @@ static int __init rzscifa_early_console_setup(struct earlycon_device *device, port_cfg.regtype = SCIx_RZ_SCIFA_REGTYPE; return early_console_setup(device, PORT_SCIF); } + static int __init scifa_early_console_setup(struct earlycon_device *device, const char *opt) { @@ -3471,6 +3467,7 @@ static int __init hscif_early_console_setup(struct earlycon_device *device, OF_EARLYCON_DECLARE(sci, "renesas,sci", sci_early_console_setup); OF_EARLYCON_DECLARE(scif, "renesas,scif", scif_early_console_setup); OF_EARLYCON_DECLARE(scif, "renesas,scif-r7s9210", rzscifa_early_console_setup); +OF_EARLYCON_DECLARE(scif, "renesas,scif-r9a07g044", rzscifa_early_console_setup); OF_EARLYCON_DECLARE(scifa, "renesas,scifa", scifa_early_console_setup); OF_EARLYCON_DECLARE(scifb, "renesas,scifb", scifb_early_console_setup); OF_EARLYCON_DECLARE(hscif, "renesas,hscif", hscif_early_console_setup); diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index c0dfe4382898..c0ae78632dda 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -31,6 +31,7 @@ enum { SCCKS, /* BRG Clock Select Register */ HSRTRGR, /* Rx FIFO Data Count Trigger Register */ HSTTRGR, /* Tx FIFO Data Count Trigger Register */ + SEMR, /* Serial extended mode register */ SCIx_NR_REGS, }; diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index e7048515a79c..87e480cc8206 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -65,7 +65,7 @@ static struct uart_driver asc_uart_driver; /* ASC_RXBUF */ #define ASC_RXBUF_PE 0x100 #define ASC_RXBUF_FE 0x200 -/** +/* * Some of status comes from higher bits of the character and some come from * the status register. Combining both of them in to single status using dummy * bits. @@ -478,7 +478,7 @@ static void asc_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { struct asc_port *ascport = to_asc_port(port); - unsigned long flags = 0; + unsigned long flags; u32 ctl; switch (state) { diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index c2ae7b392b86..ef793b3b4591 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -718,36 +718,6 @@ static void stm32_usart_shutdown(struct uart_port *port) free_irq(port->irq, port); } -static unsigned int stm32_usart_get_databits(struct ktermios *termios) -{ - unsigned int bits; - - tcflag_t cflag = termios->c_cflag; - - switch (cflag & CSIZE) { - /* - * CSIZE settings are not necessarily supported in hardware. - * CSIZE unsupported configurations are handled here to set word length - * to 8 bits word as default configuration and to print debug message. - */ - case CS5: - bits = 5; - break; - case CS6: - bits = 6; - break; - case CS7: - bits = 7; - break; - /* default including CS8 */ - default: - bits = 8; - break; - } - - return bits; -} - static void stm32_usart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -805,7 +775,7 @@ static void stm32_usart_set_termios(struct uart_port *port, if (cflag & CSTOPB) cr2 |= USART_CR2_STOP_2B; - bits = stm32_usart_get_databits(termios); + bits = tty_get_char_size(cflag); stm32_port->rdr_mask = (BIT(bits) - 1); if (cflag & PARENB) { @@ -980,7 +950,7 @@ static void stm32_usart_pm(struct uart_port *port, unsigned int state, struct stm32_port, port); const struct stm32_usart_offsets *ofs = &stm32port->info->ofs; const struct stm32_usart_config *cfg = &stm32port->info->cfg; - unsigned long flags = 0; + unsigned long flags; switch (state) { case UART_PM_STATE_ON: @@ -1182,6 +1152,14 @@ static const struct of_device_id stm32_match[] = { MODULE_DEVICE_TABLE(of, stm32_match); #endif +static void stm32_usart_of_dma_rx_remove(struct stm32_port *stm32port, + struct platform_device *pdev) +{ + if (stm32port->rx_buf) + dma_free_coherent(&pdev->dev, RX_BUF_L, stm32port->rx_buf, + stm32port->rx_dma_buf); +} + static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, struct platform_device *pdev) { @@ -1199,19 +1177,11 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, if (uart_console(port)) return -ENODEV; - /* Request DMA RX channel */ - stm32port->rx_ch = dma_request_slave_channel(dev, "rx"); - if (!stm32port->rx_ch) { - dev_info(dev, "rx dma alloc failed\n"); - return -ENODEV; - } stm32port->rx_buf = dma_alloc_coherent(&pdev->dev, RX_BUF_L, &stm32port->rx_dma_buf, GFP_KERNEL); - if (!stm32port->rx_buf) { - ret = -ENOMEM; - goto alloc_err; - } + if (!stm32port->rx_buf) + return -ENOMEM; /* Configure DMA channel */ memset(&config, 0, sizeof(config)); @@ -1221,8 +1191,8 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, ret = dmaengine_slave_config(stm32port->rx_ch, &config); if (ret < 0) { dev_err(dev, "rx dma channel config failed\n"); - ret = -ENODEV; - goto config_err; + stm32_usart_of_dma_rx_remove(stm32port, pdev); + return ret; } /* Prepare a DMA cyclic transaction */ @@ -1232,8 +1202,8 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, DMA_PREP_INTERRUPT); if (!desc) { dev_err(dev, "rx dma prep cyclic failed\n"); - ret = -ENODEV; - goto config_err; + stm32_usart_of_dma_rx_remove(stm32port, pdev); + return -ENODEV; } /* No callback as dma buffer is drained on usart interrupt */ @@ -1244,24 +1214,22 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, ret = dma_submit_error(dmaengine_submit(desc)); if (ret) { dmaengine_terminate_sync(stm32port->rx_ch); - goto config_err; + stm32_usart_of_dma_rx_remove(stm32port, pdev); + return ret; } /* Issue pending DMA requests */ dma_async_issue_pending(stm32port->rx_ch); return 0; +} -config_err: - dma_free_coherent(&pdev->dev, - RX_BUF_L, stm32port->rx_buf, - stm32port->rx_dma_buf); - -alloc_err: - dma_release_channel(stm32port->rx_ch); - stm32port->rx_ch = NULL; - - return ret; +static void stm32_usart_of_dma_tx_remove(struct stm32_port *stm32port, + struct platform_device *pdev) +{ + if (stm32port->tx_buf) + dma_free_coherent(&pdev->dev, TX_BUF_L, stm32port->tx_buf, + stm32port->tx_dma_buf); } static int stm32_usart_of_dma_tx_probe(struct stm32_port *stm32port, @@ -1275,19 +1243,11 @@ static int stm32_usart_of_dma_tx_probe(struct stm32_port *stm32port, stm32port->tx_dma_busy = false; - /* Request DMA TX channel */ - stm32port->tx_ch = dma_request_slave_channel(dev, "tx"); - if (!stm32port->tx_ch) { - dev_info(dev, "tx dma alloc failed\n"); - return -ENODEV; - } stm32port->tx_buf = dma_alloc_coherent(&pdev->dev, TX_BUF_L, &stm32port->tx_dma_buf, GFP_KERNEL); - if (!stm32port->tx_buf) { - ret = -ENOMEM; - goto alloc_err; - } + if (!stm32port->tx_buf) + return -ENOMEM; /* Configure DMA channel */ memset(&config, 0, sizeof(config)); @@ -1297,22 +1257,11 @@ static int stm32_usart_of_dma_tx_probe(struct stm32_port *stm32port, ret = dmaengine_slave_config(stm32port->tx_ch, &config); if (ret < 0) { dev_err(dev, "tx dma channel config failed\n"); - ret = -ENODEV; - goto config_err; + stm32_usart_of_dma_tx_remove(stm32port, pdev); + return ret; } return 0; - -config_err: - dma_free_coherent(&pdev->dev, - TX_BUF_L, stm32port->tx_buf, - stm32port->tx_dma_buf); - -alloc_err: - dma_release_channel(stm32port->tx_ch); - stm32port->tx_ch = NULL; - - return ret; } static int stm32_usart_serial_probe(struct platform_device *pdev) @@ -1336,16 +1285,43 @@ static int stm32_usart_serial_probe(struct platform_device *pdev) device_set_wakeup_capable(&pdev->dev, true); ret = dev_pm_set_wake_irq(&pdev->dev, stm32port->port.irq); if (ret) - goto err_nowup; + goto err_deinit_port; } - ret = stm32_usart_of_dma_rx_probe(stm32port, pdev); - if (ret) - dev_info(&pdev->dev, "interrupt mode used for rx (no dma)\n"); + stm32port->rx_ch = dma_request_chan(&pdev->dev, "rx"); + if (PTR_ERR(stm32port->rx_ch) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_wakeirq; + } + /* Fall back in interrupt mode for any non-deferral error */ + if (IS_ERR(stm32port->rx_ch)) + stm32port->rx_ch = NULL; - ret = stm32_usart_of_dma_tx_probe(stm32port, pdev); - if (ret) - dev_info(&pdev->dev, "interrupt mode used for tx (no dma)\n"); + stm32port->tx_ch = dma_request_chan(&pdev->dev, "tx"); + if (PTR_ERR(stm32port->tx_ch) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_dma_rx; + } + /* Fall back in interrupt mode for any non-deferral error */ + if (IS_ERR(stm32port->tx_ch)) + stm32port->tx_ch = NULL; + + if (stm32port->rx_ch && stm32_usart_of_dma_rx_probe(stm32port, pdev)) { + /* Fall back in interrupt mode */ + dma_release_channel(stm32port->rx_ch); + stm32port->rx_ch = NULL; + } + + if (stm32port->tx_ch && stm32_usart_of_dma_tx_probe(stm32port, pdev)) { + /* Fall back in interrupt mode */ + dma_release_channel(stm32port->tx_ch); + stm32port->tx_ch = NULL; + } + + if (!stm32port->rx_ch) + dev_info(&pdev->dev, "interrupt mode for rx (no dma)\n"); + if (!stm32port->tx_ch) + dev_info(&pdev->dev, "interrupt mode for tx (no dma)\n"); platform_set_drvdata(pdev, &stm32port->port); @@ -1366,30 +1342,23 @@ err_port: pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - if (stm32port->rx_ch) { - dmaengine_terminate_async(stm32port->rx_ch); - dma_release_channel(stm32port->rx_ch); - } - - if (stm32port->rx_dma_buf) - dma_free_coherent(&pdev->dev, - RX_BUF_L, stm32port->rx_buf, - stm32port->rx_dma_buf); - if (stm32port->tx_ch) { - dmaengine_terminate_async(stm32port->tx_ch); + stm32_usart_of_dma_tx_remove(stm32port, pdev); dma_release_channel(stm32port->tx_ch); } - if (stm32port->tx_dma_buf) - dma_free_coherent(&pdev->dev, - TX_BUF_L, stm32port->tx_buf, - stm32port->tx_dma_buf); + if (stm32port->rx_ch) + stm32_usart_of_dma_rx_remove(stm32port, pdev); +err_dma_rx: + if (stm32port->rx_ch) + dma_release_channel(stm32port->rx_ch); + +err_wakeirq: if (stm32port->wakeup_src) dev_pm_clear_wake_irq(&pdev->dev); -err_nowup: +err_deinit_port: if (stm32port->wakeup_src) device_set_wakeup_capable(&pdev->dev, false); @@ -1416,27 +1385,19 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR); - if (stm32_port->rx_ch) { - dmaengine_terminate_async(stm32_port->rx_ch); - dma_release_channel(stm32_port->rx_ch); - } - - if (stm32_port->rx_dma_buf) - dma_free_coherent(&pdev->dev, - RX_BUF_L, stm32_port->rx_buf, - stm32_port->rx_dma_buf); - - stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); - if (stm32_port->tx_ch) { dmaengine_terminate_async(stm32_port->tx_ch); + stm32_usart_of_dma_tx_remove(stm32_port, pdev); dma_release_channel(stm32_port->tx_ch); } - if (stm32_port->tx_dma_buf) - dma_free_coherent(&pdev->dev, - TX_BUF_L, stm32_port->tx_buf, - stm32_port->tx_dma_buf); + if (stm32_port->rx_ch) { + dmaengine_terminate_async(stm32_port->rx_ch); + stm32_usart_of_dma_rx_remove(stm32_port, pdev); + dma_release_channel(stm32_port->rx_ch); + } + + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); if (stm32_port->wakeup_src) { dev_pm_clear_wake_irq(&pdev->dev); diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index bab551f46963..92e572634009 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -35,7 +35,7 @@ #include #include -#include +#include #include #include #include diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 12c2468f2b0e..425a016f9db7 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -39,7 +39,7 @@ #include #include -#include +#include #include #include #include diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index 001e19d7c17d..1a54e3e52ed6 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -35,7 +35,7 @@ #include #include -#include +#include #include #include #include diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c index 52687c65ad74..4877c54c613d 100644 --- a/drivers/tty/serial/tegra-tcu.c +++ b/drivers/tty/serial/tegra-tcu.c @@ -195,13 +195,6 @@ static int tegra_tcu_probe(struct platform_device *pdev) return err; } - tcu->rx = mbox_request_channel_byname(&tcu->rx_client, "rx"); - if (IS_ERR(tcu->rx)) { - err = PTR_ERR(tcu->rx); - dev_err(&pdev->dev, "failed to get rx mailbox: %d\n", err); - goto free_tx; - } - #if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE) /* setup the console */ strcpy(tcu->console.name, "ttyTCU"); @@ -226,7 +219,7 @@ static int tegra_tcu_probe(struct platform_device *pdev) if (err) { dev_err(&pdev->dev, "failed to register UART driver: %d\n", err); - goto free_rx; + goto free_tx; } /* setup the port */ @@ -246,6 +239,17 @@ static int tegra_tcu_probe(struct platform_device *pdev) goto unregister_uart; } + /* + * Request RX channel after creating port to ensure tcu->port + * is ready for any immediate incoming bytes. + */ + tcu->rx = mbox_request_channel_byname(&tcu->rx_client, "rx"); + if (IS_ERR(tcu->rx)) { + err = PTR_ERR(tcu->rx); + dev_err(&pdev->dev, "failed to get rx mailbox: %d\n", err); + goto remove_uart_port; + } + platform_set_drvdata(pdev, tcu); #if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE) register_console(&tcu->console); @@ -253,10 +257,10 @@ static int tegra_tcu_probe(struct platform_device *pdev) return 0; +remove_uart_port: + uart_remove_one_port(&tcu->driver, &tcu->port); unregister_uart: uart_unregister_driver(&tcu->driver); -free_rx: - mbox_free_channel(tcu->rx); free_tx: mbox_free_channel(tcu->tx); @@ -270,9 +274,9 @@ static int tegra_tcu_remove(struct platform_device *pdev) #if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE) unregister_console(&tcu->console); #endif + mbox_free_channel(tcu->rx); uart_remove_one_port(&tcu->driver, &tcu->port); uart_unregister_driver(&tcu->driver); - mbox_free_channel(tcu->rx); mbox_free_channel(tcu->tx); return 0; diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index f42ccc40ffa6..a5f15f22d9ef 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -505,21 +505,23 @@ static void ulite_console_write(struct console *co, const char *s, static int ulite_console_setup(struct console *co, char *options) { - struct uart_port *port; + struct uart_port *port = NULL; int baud = 9600; int bits = 8; int parity = 'n'; int flow = 'n'; - - port = console_port; + if (co->index >= 0 && co->index < ULITE_NR_UARTS) + port = ulite_ports + co->index; /* Has the device been initialized yet? */ - if (!port->mapbase) { + if (!port || !port->mapbase) { pr_debug("console on ttyUL%i not present\n", co->index); return -ENODEV; } + console_port = port; + /* not initialized yet? */ if (!port->membase) { if (ulite_request_port(port)) @@ -655,17 +657,6 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq, dev_set_drvdata(dev, port); -#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE - /* - * If console hasn't been found yet try to assign this port - * because it is required to be assigned for console setup function. - * If register_console() don't assign value, then console_port pointer - * is cleanup. - */ - if (ulite_uart_driver.cons->index == -1) - console_port = port; -#endif - /* Register the port */ rc = uart_add_one_port(&ulite_uart_driver, port); if (rc) { @@ -675,12 +666,6 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq, return rc; } -#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE - /* This is not port which is used for console that's why clean it up */ - if (ulite_uart_driver.cons->index == -1) - console_port = NULL; -#endif - return 0; } diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c index eeb4b6568776..647198b1e2b9 100644 --- a/drivers/tty/serial/vr41xx_siu.c +++ b/drivers/tty/serial/vr41xx_siu.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 67a2db621e2b..962e522ccc45 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -484,7 +484,7 @@ static unsigned int cdns_uart_set_baud_rate(struct uart_port *port, #ifdef CONFIG_COMMON_CLK /** - * cdns_uart_clk_notitifer_cb - Clock notifier callback + * cdns_uart_clk_notifier_cb - Clock notifier callback * @nb: Notifier block * @event: Notify event * @data: Notifier data @@ -497,8 +497,8 @@ static int cdns_uart_clk_notifier_cb(struct notifier_block *nb, struct uart_port *port; int locked = 0; struct clk_notifier_data *ndata = data; - unsigned long flags = 0; struct cdns_uart *cdns_uart = to_cdns_uart(nb); + unsigned long flags; port = cdns_uart->port; if (port->suspended) @@ -1149,7 +1149,7 @@ static void cdns_uart_console_putchar(struct uart_port *port, int ch) } static void cdns_early_write(struct console *con, const char *s, - unsigned n) + unsigned int n) { struct earlycon_device *dev = con->data; @@ -1210,7 +1210,7 @@ static void cdns_uart_console_write(struct console *co, const char *s, unsigned int count) { struct uart_port *port = console_port; - unsigned long flags = 0; + unsigned long flags; unsigned int imr, ctrl; int locked = 1; @@ -1308,7 +1308,7 @@ static int cdns_uart_suspend(struct device *device) may_wake = device_may_wakeup(device); if (console_suspend_enabled && uart_console(port) && may_wake) { - unsigned long flags = 0; + unsigned long flags; spin_lock_irqsave(&port->lock, flags); /* Empty the receive FIFO 1st before making changes */ @@ -1339,7 +1339,7 @@ static int cdns_uart_resume(struct device *device) { struct uart_port *port = dev_get_drvdata(device); struct cdns_uart *cdns_uart = port->private_data; - unsigned long flags = 0; + unsigned long flags; u32 ctrl_reg; int may_wake; diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 5523cf7bd1c2..5bb928b7873e 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -768,7 +768,7 @@ static int write(struct tty_struct *tty, if (!info->tx_buf || (count > info->max_frame_size)) return -EIO; - if (!count || tty->stopped || tty->hw_stopped) + if (!count || tty->flow.stopped || tty->hw_stopped) return 0; spin_lock_irqsave(&info->lock, flags); @@ -868,15 +868,15 @@ exit: DBGINFO(("%s wait_until_sent exit\n", info->device_name)); } -static int write_room(struct tty_struct *tty) +static unsigned int write_room(struct tty_struct *tty) { struct slgt_info *info = tty->driver_data; - int ret; + unsigned int ret; if (sanity_check(info, tty->name, "write_room")) return 0; ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; - DBGINFO(("%s write_room=%d\n", info->device_name, ret)); + DBGINFO(("%s write_room=%u\n", info->device_name, ret)); return ret; } @@ -889,7 +889,7 @@ static void flush_chars(struct tty_struct *tty) return; DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count)); - if (info->tx_count <= 0 || tty->stopped || + if (info->tx_count <= 0 || tty->flow.stopped || tty->hw_stopped || !info->tx_buf) return; @@ -1254,14 +1254,14 @@ static int synclink_gt_proc_show(struct seq_file *m, void *v) /* * return count of bytes in transmit buffer */ -static int chars_in_buffer(struct tty_struct *tty) +static unsigned int chars_in_buffer(struct tty_struct *tty) { struct slgt_info *info = tty->driver_data; - int count; + unsigned int count; if (sanity_check(info, tty->name, "chars_in_buffer")) return 0; count = tbuf_bytes(info); - DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count)); + DBGINFO(("%s chars_in_buffer()=%u\n", info->device_name, count)); return count; } @@ -2241,7 +2241,7 @@ static void isr_txeom(struct slgt_info *info, unsigned short status) else #endif { - if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { + if (info->port.tty && (info->port.tty->flow.stopped || info->port.tty->hw_stopped)) { tx_stop(info); return; } @@ -2465,14 +2465,7 @@ static void change_params(struct slgt_info *info) /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: info->params.data_bits = 5; break; - case CS6: info->params.data_bits = 6; break; - case CS7: info->params.data_bits = 7; break; - case CS8: info->params.data_bits = 8; break; - default: info->params.data_bits = 7; break; - } - + info->params.data_bits = tty_get_char_size(cflag); info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1; if (cflag & PARENB) diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c index 48b5de659c77..426b1252781a 100644 --- a/drivers/tty/tty_baudrate.c +++ b/drivers/tty/tty_baudrate.c @@ -147,7 +147,7 @@ void tty_termios_encode_baud_rate(struct ktermios *termios, int iclose = ibaud/50, oclose = obaud/50; int ibinput = 0; - if (obaud == 0) /* CD dropped */ + if (obaud == 0) /* CD dropped */ ibaud = 0; /* Clear ibaud to be sure */ termios->c_ispeed = ibaud; @@ -159,8 +159,9 @@ void tty_termios_encode_baud_rate(struct ktermios *termios, #endif #ifdef BOTHER /* If the user asked for a precise weird speed give a precise weird - answer. If they asked for a Bfoo speed they may have problems - digesting non-exact replies so fuzz a bit */ + * answer. If they asked for a Bfoo speed they may have problems + * digesting non-exact replies so fuzz a bit. + */ if ((termios->c_cflag & CBAUD) == BOTHER) { oclose = 0; @@ -191,7 +192,8 @@ void tty_termios_encode_baud_rate(struct ktermios *termios, if (ibaud - iclose <= baud_table[i] && ibaud + iclose >= baud_table[i]) { /* For the case input == output don't set IBAUD bits - if the user didn't do so */ + * if the user didn't do so. + */ if (ofound == i && !ibinput) ifound = i; #ifdef IBSHIFT @@ -211,7 +213,8 @@ void tty_termios_encode_baud_rate(struct ktermios *termios, if (ofound == -1) termios->c_cflag |= BOTHER; /* Set exact input bits only if the input and output differ or the - user already did */ + * user already did. + */ if (ifound == -1 && (ibaud != obaud || ibinput)) termios->c_cflag |= (BOTHER << IBSHIFT); #else diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 9733469a14b2..635d0af229b7 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -32,8 +32,8 @@ * We default to dicing tty buffer allocations to this many characters * in order to avoid multiple page allocations. We know the size of * tty_buffer itself but it must also be taken into account that the - * the buffer is 256 byte aligned. See tty_buffer_find for the allocation - * logic this must match + * buffer is 256 byte aligned. See tty_buffer_find for the allocation + * logic this must match. */ #define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF) @@ -88,9 +88,10 @@ EXPORT_SYMBOL_GPL(tty_buffer_unlock_exclusive); * pre-allocate if memory guarantee is required). */ -int tty_buffer_space_avail(struct tty_port *port) +unsigned int tty_buffer_space_avail(struct tty_port *port) { int space = port->buf.mem_limit - atomic_read(&port->buf.mem_used); + return max(space, 0); } EXPORT_SYMBOL_GPL(tty_buffer_space_avail); @@ -169,7 +170,8 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size) } /* Should possibly check if this fails for the largest buffer we - have queued and recycle that ? */ + * have queued and recycle that ? + */ if (atomic_read(&port->buf.mem_used) > port->buf.mem_limit) return NULL; p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC); @@ -242,7 +244,7 @@ void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld) } /** - * tty_buffer_request_room - grow tty buffer if needed + * __tty_buffer_request_room - grow tty buffer if needed * @port: tty port * @size: size desired * @flags: buffer flags if new buffer allocated (default = 0) @@ -312,11 +314,13 @@ int tty_insert_flip_string_fixed_flag(struct tty_port *port, const unsigned char *chars, char flag, size_t size) { int copied = 0; + do { int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE); int flags = (flag == TTY_NORMAL) ? TTYB_NORMAL : 0; int space = __tty_buffer_request_room(port, goal, flags); struct tty_buffer *tb = port->buf.tail; + if (unlikely(space == 0)) break; memcpy(char_buf_ptr(tb, tb->used), chars, space); @@ -326,7 +330,8 @@ int tty_insert_flip_string_fixed_flag(struct tty_port *port, copied += space; chars += space; /* There is a small chance that we need to split the data over - several buffers. If this is the case we must loop */ + * several buffers. If this is the case we must loop. + */ } while (unlikely(size > copied)); return copied; } @@ -348,10 +353,12 @@ int tty_insert_flip_string_flags(struct tty_port *port, const unsigned char *chars, const char *flags, size_t size) { int copied = 0; + do { int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE); int space = tty_buffer_request_room(port, goal); struct tty_buffer *tb = port->buf.tail; + if (unlikely(space == 0)) break; memcpy(char_buf_ptr(tb, tb->used), chars, space); @@ -361,7 +368,8 @@ int tty_insert_flip_string_flags(struct tty_port *port, chars += space; flags += space; /* There is a small chance that we need to split the data over - several buffers. If this is the case we must loop */ + * several buffers. If this is the case we must loop. + */ } while (unlikely(size > copied)); return copied; } @@ -431,8 +439,10 @@ int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars, size_t size) { int space = __tty_buffer_request_room(port, size, TTYB_NORMAL); + if (likely(space)) { struct tty_buffer *tb = port->buf.tail; + *chars = char_buf_ptr(tb, tb->used); if (~tb->flags & TTYB_NORMAL) memset(flag_buf_ptr(tb, tb->used), TTY_NORMAL, space); @@ -455,7 +465,7 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string); * Returns the number of bytes processed */ int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p, - char *f, int count) + const char *f, int count) { if (ld->ops->receive_buf2) count = ld->ops->receive_buf2(ld->tty, p, f, count); @@ -472,7 +482,7 @@ static int receive_buf(struct tty_port *port, struct tty_buffer *head, int count) { unsigned char *p = char_buf_ptr(head, head->read); - char *f = NULL; + const char *f = NULL; int n; if (~head->flags & TTYB_NORMAL) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 5b5e99604989..26debec26b4e 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -33,7 +33,7 @@ * -- Nick Holloway , 27th May 1993. * * Rewrote canonical mode and added more termios flags. - * -- julian@uhunix.uhcc.hawaii.edu (J. Cowley), 13Jan94 + * -- julian@uhunix.uhcc.hawaii.edu (J. Cowley), 13Jan94 * * Reorganized FASYNC support so mouse code can share it. * -- ctm@ardi.com, 9Sep95 @@ -131,12 +131,12 @@ struct ktermios tty_std_termios = { /* for the benefit of tty drivers */ .c_ospeed = 38400, /* .c_line = N_TTY, */ }; - EXPORT_SYMBOL(tty_std_termios); /* This list gets poked at by procfs and various bits of boot up code. This - could do with some rationalisation such as pulling the tty proc function - into this file */ + * could do with some rationalisation such as pulling the tty proc function + * into this file. + */ LIST_HEAD(tty_drivers); /* linked list of tty drivers */ @@ -248,7 +248,6 @@ const char *tty_name(const struct tty_struct *tty) return "NULL tty"; return tty->name; } - EXPORT_SYMBOL(tty_name); const char *tty_driver_name(const struct tty_struct *tty) @@ -320,6 +319,7 @@ static struct tty_driver *get_tty_driver(dev_t device, int *index) list_for_each_entry(p, &tty_drivers, tty_drivers) { dev_t base = MKDEV(p->major, p->minor_start); + if (device < base || device >= base + p->num) continue; *index = device - base; @@ -537,7 +537,6 @@ void tty_wakeup(struct tty_struct *tty) } wake_up_interruptible_poll(&tty->write_wait, EPOLLOUT); } - EXPORT_SYMBOL_GPL(tty_wakeup); /** @@ -613,8 +612,9 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) set_bit(TTY_HUPPING, &tty->flags); /* inuse_filps is protected by the single tty lock, - this really needs to change if we want to flush the - workqueue with the lock held */ + * this really needs to change if we want to flush the + * workqueue with the lock held. + */ check_tty_count(tty, "tty_hangup"); spin_lock(&tty->files_lock); @@ -638,15 +638,15 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) tty_ldisc_hangup(tty, cons_filp != NULL); - spin_lock_irq(&tty->ctrl_lock); + spin_lock_irq(&tty->ctrl.lock); clear_bit(TTY_THROTTLED, &tty->flags); clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); - put_pid(tty->session); - put_pid(tty->pgrp); - tty->session = NULL; - tty->pgrp = NULL; - tty->ctrl_status = 0; - spin_unlock_irq(&tty->ctrl_lock); + put_pid(tty->ctrl.session); + put_pid(tty->ctrl.pgrp); + tty->ctrl.session = NULL; + tty->ctrl.pgrp = NULL; + tty->ctrl.pktstatus = 0; + spin_unlock_irq(&tty->ctrl.lock); /* * If one of the devices matches a console pointer, we @@ -694,7 +694,6 @@ void tty_hangup(struct tty_struct *tty) tty_debug_hangup(tty, "hangup\n"); schedule_work(&tty->hangup_work); } - EXPORT_SYMBOL(tty_hangup); /** @@ -711,7 +710,6 @@ void tty_vhangup(struct tty_struct *tty) tty_debug_hangup(tty, "vhangup\n"); __tty_hangup(tty, 0); } - EXPORT_SYMBOL(tty_vhangup); @@ -761,9 +759,17 @@ int tty_hung_up_p(struct file *filp) { return (filp && filp->f_op == &hung_up_tty_fops); } - EXPORT_SYMBOL(tty_hung_up_p); +void __stop_tty(struct tty_struct *tty) +{ + if (tty->flow.stopped) + return; + tty->flow.stopped = true; + if (tty->ops->stop) + tty->ops->stop(tty); +} + /** * stop_tty - propagate flow control * @tty: tty to stop @@ -778,28 +784,28 @@ EXPORT_SYMBOL(tty_hung_up_p); * but not always. * * Locking: - * flow_lock + * flow.lock */ - -void __stop_tty(struct tty_struct *tty) -{ - if (tty->stopped) - return; - tty->stopped = 1; - if (tty->ops->stop) - tty->ops->stop(tty); -} - void stop_tty(struct tty_struct *tty) { unsigned long flags; - spin_lock_irqsave(&tty->flow_lock, flags); + spin_lock_irqsave(&tty->flow.lock, flags); __stop_tty(tty); - spin_unlock_irqrestore(&tty->flow_lock, flags); + spin_unlock_irqrestore(&tty->flow.lock, flags); } EXPORT_SYMBOL(stop_tty); +void __start_tty(struct tty_struct *tty) +{ + if (!tty->flow.stopped || tty->flow.tco_stopped) + return; + tty->flow.stopped = false; + if (tty->ops->start) + tty->ops->start(tty); + tty_wakeup(tty); +} + /** * start_tty - propagate flow control * @tty: tty to start @@ -809,26 +815,15 @@ EXPORT_SYMBOL(stop_tty); * start method is invoked and the line discipline woken. * * Locking: - * flow_lock + * flow.lock */ - -void __start_tty(struct tty_struct *tty) -{ - if (!tty->stopped || tty->flow_stopped) - return; - tty->stopped = 0; - if (tty->ops->start) - tty->ops->start(tty); - tty_wakeup(tty); -} - void start_tty(struct tty_struct *tty) { unsigned long flags; - spin_lock_irqsave(&tty->flow_lock, flags); + spin_lock_irqsave(&tty->flow.lock, flags); __start_tty(tty); - spin_unlock_irqrestore(&tty->flow_lock, flags); + spin_unlock_irqrestore(&tty->flow.lock, flags); } EXPORT_SYMBOL(start_tty); @@ -914,10 +909,8 @@ static int iterate_tty_read(struct tty_ldisc *ld, struct tty_struct *tty, /** * tty_read - read method for tty device files - * @file: pointer to tty file - * @buf: user buffer - * @count: size of user buffer - * @ppos: unused + * @iocb: kernel I/O control block + * @to: destination for the data read * * Perform the read system call function on this terminal device. Checks * for hung up devices before calling the line discipline method. @@ -941,7 +934,8 @@ static ssize_t tty_read(struct kiocb *iocb, struct iov_iter *to) return -EIO; /* We want to wait for the line discipline to sort out in this - situation */ + * situation. + */ ld = tty_ldisc_ref_wait(tty); if (!ld) return hung_up_tty_read(iocb, to); @@ -1033,6 +1027,7 @@ static inline ssize_t do_tty_write( /* Do the write .. */ for (;;) { size_t size = count; + if (size > chunk) size = chunk; @@ -1091,36 +1086,18 @@ void tty_write_message(struct tty_struct *tty, char *msg) tty_unlock(tty); tty_write_unlock(tty); } - return; } - -/** - * tty_write - write method for tty device file - * @file: tty file pointer - * @buf: user data to write - * @count: bytes to write - * @ppos: unused - * - * Write data to a tty device via the line discipline. - * - * Locking: - * Locks the line discipline as required - * Writes to the tty driver are serialized by the atomic_write_lock - * and are then processed in chunks to the device. The line discipline - * write method will not be invoked in parallel for each device. - */ - static ssize_t file_tty_write(struct file *file, struct kiocb *iocb, struct iov_iter *from) { struct tty_struct *tty = file_tty(file); - struct tty_ldisc *ld; + struct tty_ldisc *ld; ssize_t ret; if (tty_paranoia_check(tty, file_inode(file), "tty_write")) return -EIO; if (!tty || !tty->ops->write || tty_io_error(tty)) - return -EIO; + return -EIO; /* Short term debug to catch buggy drivers */ if (tty->ops->write_room == NULL) tty_err(tty, "missing write_room method\n"); @@ -1135,6 +1112,20 @@ static ssize_t file_tty_write(struct file *file, struct kiocb *iocb, struct iov_ return ret; } +/** + * tty_write - write method for tty device file + * @iocb: kernel I/O control block + * @from: iov_iter with data to write + * + * Write data to a tty device via the line discipline. + * + * Locking: + * Locks the line discipline as required + * Writes to the tty driver are serialized by the atomic_write_lock + * and are then processed in chunks to the device. The line + * discipline write method will not be invoked in parallel for + * each device. + */ static ssize_t tty_write(struct kiocb *iocb, struct iov_iter *from) { return file_tty_write(iocb->ki_filp, iocb, from); @@ -1150,11 +1141,12 @@ ssize_t redirected_tty_write(struct kiocb *iocb, struct iov_iter *iter) spin_unlock(&redirect_lock); /* - * We know the redirected tty is just another tty, we can can + * We know the redirected tty is just another tty, we can * call file_tty_write() directly with that file pointer. */ if (p) { ssize_t res; + res = file_tty_write(p, iocb, iter); fput(p); return res; @@ -1172,7 +1164,7 @@ ssize_t redirected_tty_write(struct kiocb *iocb, struct iov_iter *iter) int tty_send_xchar(struct tty_struct *tty, char ch) { - int was_stopped = tty->stopped; + bool was_stopped = tty->flow.stopped; if (tty->ops->send_xchar) { down_read(&tty->termios_rwsem); @@ -1559,8 +1551,8 @@ static void release_one_tty(struct work_struct *work) list_del_init(&tty->tty_files); spin_unlock(&tty->files_lock); - put_pid(tty->pgrp); - put_pid(tty->session); + put_pid(tty->ctrl.pgrp); + put_pid(tty->ctrl.session); free_tty_struct(tty); } @@ -1569,7 +1561,8 @@ static void queue_release_one_tty(struct kref *kref) struct tty_struct *tty = container_of(kref, struct tty_struct, kref); /* The hangup queue is now free so we can reuse it rather than - waste a chunk of memory for each port */ + * waste a chunk of memory for each port. + */ INIT_WORK(&tty->hangup_work, release_one_tty); schedule_work(&tty->hangup_work); } @@ -1861,9 +1854,9 @@ int tty_release(struct inode *inode, struct file *filp) */ if (!tty->count) { read_lock(&tasklist_lock); - session_clear_tty(tty->session); + session_clear_tty(tty->ctrl.session); if (o_tty) - session_clear_tty(o_tty->session); + session_clear_tty(o_tty->ctrl.session); read_unlock(&tasklist_lock); } @@ -1874,7 +1867,8 @@ int tty_release(struct inode *inode, struct file *filp) tty_unlock(tty); /* At this point, the tty->count == 0 should ensure a dead tty - cannot be re-opened by a racing opener */ + * cannot be re-opened by a racing opener. + */ if (!final) return 0; @@ -1928,8 +1922,8 @@ static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp) * @index: index for the device in the @return driver * @return: driver for this inode (with increased refcount) * - * If @return is not erroneous, the caller is responsible to decrement the - * refcount by tty_driver_kref_put. + * If @return is not erroneous, the caller is responsible to decrement the + * refcount by tty_driver_kref_put. * * Locking: tty_mutex protects get_tty_driver */ @@ -1942,6 +1936,7 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp, #ifdef CONFIG_VT case MKDEV(TTY_MAJOR, 0): { extern struct tty_driver *console_driver; + driver = tty_driver_kref_get(console_driver); *index = fg_console; break; @@ -1949,6 +1944,7 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp, #endif case MKDEV(TTYAUX_MAJOR, 1): { struct tty_driver *console_driver = console_device(index); + if (console_driver) { driver = tty_driver_kref_get(console_driver); if (driver && filp) { @@ -2250,16 +2246,16 @@ static int __tty_fasync(int fd, struct file *filp, int on) enum pid_type type; struct pid *pid; - spin_lock_irqsave(&tty->ctrl_lock, flags); - if (tty->pgrp) { - pid = tty->pgrp; + spin_lock_irqsave(&tty->ctrl.lock, flags); + if (tty->ctrl.pgrp) { + pid = tty->ctrl.pgrp; type = PIDTYPE_PGID; } else { pid = task_pid(current); type = PIDTYPE_TGID; } get_pid(pid); - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + spin_unlock_irqrestore(&tty->ctrl.lock, flags); __f_setown(filp, pid, type, 0); put_pid(pid); retval = 0; @@ -2336,7 +2332,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) err = copy_to_user(arg, &tty->winsize, sizeof(*arg)); mutex_unlock(&tty->winsize_mutex); - return err ? -EFAULT: 0; + return err ? -EFAULT : 0; } /** @@ -2381,13 +2377,14 @@ EXPORT_SYMBOL(tty_do_resize); * * Locking: * Driver dependent. The default do_resize method takes the - * tty termios mutex and ctrl_lock. The console takes its own lock + * tty termios mutex and ctrl.lock. The console takes its own lock * then calls into the default method. */ static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg) { struct winsize tmp_ws; + if (copy_from_user(&tmp_ws, arg, sizeof(*arg))) return -EFAULT; @@ -2412,6 +2409,7 @@ static int tioccons(struct file *file) return -EPERM; if (file->f_op->write_iter == redirected_tty_write) { struct file *f; + spin_lock(&redirect_lock); f = redirect; redirect = NULL; @@ -2734,6 +2732,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCGEXCL: { int excl = test_bit(TTY_EXCLUSIVE, &tty->flags); + return put_user(excl, (int __user *)p); } case TIOCGETD: @@ -2748,6 +2747,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCGDEV: { unsigned int ret = new_encode_dev(tty_devnum(real_tty)); + return put_user(ret, (unsigned int __user *)p); } /* @@ -3006,7 +3006,7 @@ static int this_tty(const void *t, struct file *file, unsigned fd) return 0; return file_tty(file) != t ? 0 : fd + 1; } - + /* * This implements the "Secure Attention Key" --- the idea is to * prevent trojan horses by killing all processes associated with this @@ -3039,9 +3039,9 @@ void __do_SAK(struct tty_struct *tty) if (!tty) return; - spin_lock_irqsave(&tty->ctrl_lock, flags); - session = get_pid(tty->session); - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + spin_lock_irqsave(&tty->ctrl.lock, flags); + session = get_pid(tty->ctrl.session); + spin_unlock_irqrestore(&tty->ctrl.lock, flags); tty_ldisc_flush(tty); @@ -3096,13 +3096,13 @@ void do_SAK(struct tty_struct *tty) return; schedule_work(&tty->SAK_work); } - EXPORT_SYMBOL(do_SAK); /* Must put_device() after it's unused! */ static struct device *tty_get_device(struct tty_struct *tty) { dev_t devt = tty_devnum(tty); + return class_find_device_by_devt(tty_class, devt); } @@ -3129,8 +3129,8 @@ struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx) kfree(tty); return NULL; } - tty->session = NULL; - tty->pgrp = NULL; + tty->ctrl.session = NULL; + tty->ctrl.pgrp = NULL; mutex_init(&tty->legacy_mutex); mutex_init(&tty->throttle_mutex); init_rwsem(&tty->termios_rwsem); @@ -3140,8 +3140,8 @@ struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx) init_waitqueue_head(&tty->read_wait); INIT_WORK(&tty->hangup_work, do_tty_hangup); mutex_init(&tty->atomic_write_lock); - spin_lock_init(&tty->ctrl_lock); - spin_lock_init(&tty->flow_lock); + spin_lock_init(&tty->ctrl.lock); + spin_lock_init(&tty->flow.lock); spin_lock_init(&tty->files_lock); INIT_LIST_HEAD(&tty->tty_files); INIT_WORK(&tty->SAK_work, do_SAK_work); @@ -3317,11 +3317,11 @@ err_put: EXPORT_SYMBOL_GPL(tty_register_device_attr); /** - * tty_unregister_device - unregister a tty device - * @driver: the tty driver that describes the tty device - * @index: the index in the tty driver for this tty device + * tty_unregister_device - unregister a tty device + * @driver: the tty driver that describes the tty device + * @index: the index in the tty driver for this tty device * - * If a tty device is registered with a call to tty_register_device() then + * If a tty device is registered with a call to tty_register_device() then * this function must be called when the tty device is gone. * * Locking: ?? diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 41f7449d0464..507a25d692bb 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -54,7 +54,7 @@ * to be no queue on the device. */ -int tty_chars_in_buffer(struct tty_struct *tty) +unsigned int tty_chars_in_buffer(struct tty_struct *tty) { if (tty->ops->chars_in_buffer) return tty->ops->chars_in_buffer(tty); @@ -73,7 +73,7 @@ EXPORT_SYMBOL(tty_chars_in_buffer); * returned and data may be lost as there will be no flow control. */ -int tty_write_room(struct tty_struct *tty) +unsigned int tty_write_room(struct tty_struct *tty) { if (tty->ops->write_room) return tty->ops->write_room(tty); @@ -96,28 +96,6 @@ void tty_driver_flush_buffer(struct tty_struct *tty) } EXPORT_SYMBOL(tty_driver_flush_buffer); -/** - * tty_throttle - flow control - * @tty: terminal - * - * Indicate that a tty should stop transmitting data down the stack. - * Takes the termios rwsem to protect against parallel throttle/unthrottle - * and also to ensure the driver can consistently reference its own - * termios data at this point when implementing software flow control. - */ - -void tty_throttle(struct tty_struct *tty) -{ - down_write(&tty->termios_rwsem); - /* check TTY_THROTTLED first so it indicates our state */ - if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) && - tty->ops->throttle) - tty->ops->throttle(tty); - tty->flow_change = 0; - up_write(&tty->termios_rwsem); -} -EXPORT_SYMBOL(tty_throttle); - /** * tty_unthrottle - flow control * @tty: terminal @@ -146,10 +124,11 @@ EXPORT_SYMBOL(tty_unthrottle); * tty_throttle_safe - flow control * @tty: terminal * - * Similar to tty_throttle() but will only attempt throttle - * if tty->flow_change is TTY_THROTTLE_SAFE. Prevents an accidental - * throttle due to race conditions when throttling is conditional - * on factors evaluated prior to throttling. + * Indicate that a tty should stop transmitting data down the stack. + * tty_throttle_safe will only attempt throttle if tty->flow_change is + * TTY_THROTTLE_SAFE. Prevents an accidental throttle due to race + * conditions when throttling is conditional on factors evaluated prior to + * throttling. * * Returns 0 if tty is throttled (or was already throttled) */ @@ -300,6 +279,51 @@ int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b) } EXPORT_SYMBOL(tty_termios_hw_change); +/** + * tty_get_char_size - get size of a character + * @cflag: termios cflag value + * + * Get the size (in bits) of a character depending on @cflag's %CSIZE + * setting. + */ +unsigned char tty_get_char_size(unsigned int cflag) +{ + switch (cflag & CSIZE) { + case CS5: + return 5; + case CS6: + return 6; + case CS7: + return 7; + case CS8: + default: + return 8; + } +} +EXPORT_SYMBOL_GPL(tty_get_char_size); + +/** + * tty_get_frame_size - get size of a frame + * @cflag: termios cflag value + * + * Get the size (in bits) of a frame depending on @cflag's %CSIZE, %CSTOPB, + * and %PARENB setting. The result is a sum of character size, start and + * stop bits -- one bit each -- second stop bit (if set), and parity bit + * (if set). + */ +unsigned char tty_get_frame_size(unsigned int cflag) +{ + unsigned char bits = 2 + tty_get_char_size(cflag); + + if (cflag & CSTOPB) + bits++; + if (cflag & PARENB) + bits++; + + return bits; +} +EXPORT_SYMBOL_GPL(tty_get_frame_size); + /** * tty_set_termios - update termios values * @tty: tty to update @@ -846,20 +870,20 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, return retval; switch (arg) { case TCOOFF: - spin_lock_irq(&tty->flow_lock); - if (!tty->flow_stopped) { - tty->flow_stopped = 1; + spin_lock_irq(&tty->flow.lock); + if (!tty->flow.tco_stopped) { + tty->flow.tco_stopped = true; __stop_tty(tty); } - spin_unlock_irq(&tty->flow_lock); + spin_unlock_irq(&tty->flow.lock); break; case TCOON: - spin_lock_irq(&tty->flow_lock); - if (tty->flow_stopped) { - tty->flow_stopped = 0; + spin_lock_irq(&tty->flow.lock); + if (tty->flow.tco_stopped) { + tty->flow.tco_stopped = false; __start_tty(tty); } - spin_unlock_irq(&tty->flow_lock); + spin_unlock_irq(&tty->flow.lock); break; case TCIOFF: if (STOP_CHAR(tty) != __DISABLED_CHAR) diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c index 7813dc910a19..80b86a7992b5 100644 --- a/drivers/tty/tty_jobctrl.c +++ b/drivers/tty/tty_jobctrl.c @@ -20,7 +20,7 @@ static int is_ignored(int sig) } /** - * tty_check_change - check for POSIX terminal changes + * __tty_check_change - check for POSIX terminal changes * @tty: tty to check * @sig: signal to send * @@ -28,7 +28,7 @@ static int is_ignored(int sig) * not in the foreground, send a SIGTTOU. If the signal is blocked or * ignored, go ahead and perform the operation. (POSIX 7.2) * - * Locking: ctrl_lock + * Locking: ctrl.lock */ int __tty_check_change(struct tty_struct *tty, int sig) { @@ -42,9 +42,9 @@ int __tty_check_change(struct tty_struct *tty, int sig) rcu_read_lock(); pgrp = task_pgrp(current); - spin_lock_irqsave(&tty->ctrl_lock, flags); - tty_pgrp = tty->pgrp; - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + spin_lock_irqsave(&tty->ctrl.lock, flags); + tty_pgrp = tty->ctrl.pgrp; + spin_unlock_irqrestore(&tty->ctrl.lock, flags); if (tty_pgrp && pgrp != tty_pgrp) { if (is_ignored(sig)) { @@ -85,7 +85,7 @@ void proc_clear_tty(struct task_struct *p) } /** - * proc_set_tty - set the controlling terminal + * __proc_set_tty - set the controlling terminal * @tty: tty structure * * Only callable by the session leader and only if it does not already have @@ -99,16 +99,16 @@ static void __proc_set_tty(struct tty_struct *tty) { unsigned long flags; - spin_lock_irqsave(&tty->ctrl_lock, flags); + spin_lock_irqsave(&tty->ctrl.lock, flags); /* * The session and fg pgrp references will be non-NULL if * tiocsctty() is stealing the controlling tty */ - put_pid(tty->session); - put_pid(tty->pgrp); - tty->pgrp = get_pid(task_pgrp(current)); - tty->session = get_pid(task_session(current)); - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + put_pid(tty->ctrl.session); + put_pid(tty->ctrl.pgrp); + tty->ctrl.pgrp = get_pid(task_pgrp(current)); + tty->ctrl.session = get_pid(task_session(current)); + spin_unlock_irqrestore(&tty->ctrl.lock, flags); if (current->signal->tty) { tty_debug(tty, "current tty %s not NULL!!\n", current->signal->tty->name); @@ -135,7 +135,7 @@ void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty) spin_lock_irq(¤t->sighand->siglock); if (current->signal->leader && !current->signal->tty && - tty->session == NULL) { + tty->ctrl.session == NULL) { /* * Don't let a process that only has write access to the tty * obtain the privileges associated with having a tty as @@ -200,8 +200,8 @@ int tty_signal_session_leader(struct tty_struct *tty, int exit_session) struct pid *tty_pgrp = NULL; read_lock(&tasklist_lock); - if (tty->session) { - do_each_pid_task(tty->session, PIDTYPE_SID, p) { + if (tty->ctrl.session) { + do_each_pid_task(tty->ctrl.session, PIDTYPE_SID, p) { spin_lock_irq(&p->sighand->siglock); if (p->signal->tty == tty) { p->signal->tty = NULL; @@ -218,13 +218,14 @@ int tty_signal_session_leader(struct tty_struct *tty, int exit_session) __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p); __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p); put_pid(p->signal->tty_old_pgrp); /* A noop */ - spin_lock(&tty->ctrl_lock); - tty_pgrp = get_pid(tty->pgrp); - if (tty->pgrp) - p->signal->tty_old_pgrp = get_pid(tty->pgrp); - spin_unlock(&tty->ctrl_lock); + spin_lock(&tty->ctrl.lock); + tty_pgrp = get_pid(tty->ctrl.pgrp); + if (tty->ctrl.pgrp) + p->signal->tty_old_pgrp = + get_pid(tty->ctrl.pgrp); + spin_unlock(&tty->ctrl.lock); spin_unlock_irq(&p->sighand->siglock); - } while_each_pid_task(tty->session, PIDTYPE_SID, p); + } while_each_pid_task(tty->ctrl.session, PIDTYPE_SID, p); } read_unlock(&tasklist_lock); @@ -309,12 +310,12 @@ void disassociate_ctty(int on_exit) unsigned long flags; tty_lock(tty); - spin_lock_irqsave(&tty->ctrl_lock, flags); - put_pid(tty->session); - put_pid(tty->pgrp); - tty->session = NULL; - tty->pgrp = NULL; - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + spin_lock_irqsave(&tty->ctrl.lock, flags); + put_pid(tty->ctrl.session); + put_pid(tty->ctrl.pgrp); + tty->ctrl.session = NULL; + tty->ctrl.pgrp = NULL; + spin_unlock_irqrestore(&tty->ctrl.lock, flags); tty_unlock(tty); tty_kref_put(tty); } @@ -363,7 +364,8 @@ static int tiocsctty(struct tty_struct *tty, struct file *file, int arg) tty_lock(tty); read_lock(&tasklist_lock); - if (current->signal->leader && (task_session(current) == tty->session)) + if (current->signal->leader && + task_session(current) == tty->ctrl.session) goto unlock; /* @@ -375,7 +377,7 @@ static int tiocsctty(struct tty_struct *tty, struct file *file, int arg) goto unlock; } - if (tty->session) { + if (tty->ctrl.session) { /* * This tty is already the controlling * tty for another session group! @@ -384,7 +386,7 @@ static int tiocsctty(struct tty_struct *tty, struct file *file, int arg) /* * Steal it away */ - session_clear_tty(tty->session); + session_clear_tty(tty->ctrl.session); } else { ret = -EPERM; goto unlock; @@ -416,9 +418,9 @@ struct pid *tty_get_pgrp(struct tty_struct *tty) unsigned long flags; struct pid *pgrp; - spin_lock_irqsave(&tty->ctrl_lock, flags); - pgrp = get_pid(tty->pgrp); - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + spin_lock_irqsave(&tty->ctrl.lock, flags); + pgrp = get_pid(tty->ctrl.pgrp); + spin_unlock_irqrestore(&tty->ctrl.lock, flags); return pgrp; } @@ -499,10 +501,10 @@ static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t if (pgrp_nr < 0) return -EINVAL; - spin_lock_irq(&real_tty->ctrl_lock); + spin_lock_irq(&real_tty->ctrl.lock); if (!current->signal->tty || (current->signal->tty != real_tty) || - (real_tty->session != task_session(current))) { + (real_tty->ctrl.session != task_session(current))) { retval = -ENOTTY; goto out_unlock_ctrl; } @@ -515,12 +517,12 @@ static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t if (session_of_pgrp(pgrp) != task_session(current)) goto out_unlock; retval = 0; - put_pid(real_tty->pgrp); - real_tty->pgrp = get_pid(pgrp); + put_pid(real_tty->ctrl.pgrp); + real_tty->ctrl.pgrp = get_pid(pgrp); out_unlock: rcu_read_unlock(); out_unlock_ctrl: - spin_unlock_irq(&real_tty->ctrl_lock); + spin_unlock_irq(&real_tty->ctrl.lock); return retval; } @@ -545,16 +547,16 @@ static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t _ if (tty == real_tty && current->signal->tty != real_tty) return -ENOTTY; - spin_lock_irqsave(&real_tty->ctrl_lock, flags); - if (!real_tty->session) + spin_lock_irqsave(&real_tty->ctrl.lock, flags); + if (!real_tty->ctrl.session) goto err; - sid = pid_vnr(real_tty->session); - spin_unlock_irqrestore(&real_tty->ctrl_lock, flags); + sid = pid_vnr(real_tty->ctrl.session); + spin_unlock_irqrestore(&real_tty->ctrl.lock, flags); return put_user(sid, p); err: - spin_unlock_irqrestore(&real_tty->ctrl_lock, flags); + spin_unlock_irqrestore(&real_tty->ctrl.lock, flags); return -ENOTTY; } diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 03f414172f34..756a4bfa6a69 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -48,7 +48,6 @@ static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS]; /** * tty_register_ldisc - install a line discipline - * @disc: ldisc number * @new_ldisc: pointer to the ldisc object * * Installs a new line discipline into the kernel. The discipline @@ -59,18 +58,16 @@ static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS]; * takes tty_ldiscs_lock to guard against ldisc races */ -int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc) +int tty_register_ldisc(struct tty_ldisc_ops *new_ldisc) { unsigned long flags; int ret = 0; - if (disc < N_TTY || disc >= NR_LDISCS) + if (new_ldisc->num < N_TTY || new_ldisc->num >= NR_LDISCS) return -EINVAL; raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); - tty_ldiscs[disc] = new_ldisc; - new_ldisc->num = disc; - new_ldisc->refcount = 0; + tty_ldiscs[new_ldisc->num] = new_ldisc; raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); return ret; @@ -79,7 +76,7 @@ EXPORT_SYMBOL(tty_register_ldisc); /** * tty_unregister_ldisc - unload a line discipline - * @disc: ldisc number + * @ldisc: ldisc number * * Remove a line discipline from the kernel providing it is not * currently in use. @@ -88,22 +85,13 @@ EXPORT_SYMBOL(tty_register_ldisc); * takes tty_ldiscs_lock to guard against ldisc races */ -int tty_unregister_ldisc(int disc) +void tty_unregister_ldisc(struct tty_ldisc_ops *ldisc) { unsigned long flags; - int ret = 0; - - if (disc < N_TTY || disc >= NR_LDISCS) - return -EINVAL; raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); - if (tty_ldiscs[disc]->refcount) - ret = -EBUSY; - else - tty_ldiscs[disc] = NULL; + tty_ldiscs[ldisc->num] = NULL; raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); - - return ret; } EXPORT_SYMBOL(tty_unregister_ldisc); @@ -117,10 +105,8 @@ static struct tty_ldisc_ops *get_ldops(int disc) ldops = tty_ldiscs[disc]; if (ldops) { ret = ERR_PTR(-EAGAIN); - if (try_module_get(ldops->owner)) { - ldops->refcount++; + if (try_module_get(ldops->owner)) ret = ldops; - } } raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); return ret; @@ -131,7 +117,6 @@ static void put_ldops(struct tty_ldisc_ops *ldops) unsigned long flags; raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); - ldops->refcount--; module_put(ldops->owner); raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); } diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 303c198fbf5c..2f1061a9d926 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -468,7 +468,8 @@ int tty_port_block_til_ready(struct tty_port *port, DEFINE_WAIT(wait); /* if non-blocking mode is set we can pass directly to open unless - the port has just hung up or is in another error state */ + * the port has just hung up or is in another error state. + */ if (tty_io_error(tty)) { tty_port_set_active(port, 1); return 0; @@ -485,8 +486,9 @@ int tty_port_block_til_ready(struct tty_port *port, do_clocal = 1; /* Block waiting until we can proceed. We may need to wait for the - carrier, but we must also wait for any close that is in progress - before the next open may complete */ + * carrier, but we must also wait for any close that is in progress + * before the next open may complete. + */ retval = 0; @@ -503,7 +505,8 @@ int tty_port_block_til_ready(struct tty_port *port, prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); /* Check for a hangup or uninitialised port. - Return accordingly */ + * Return accordingly. + */ if (tty_hung_up_p(filp) || !tty_port_initialized(port)) { if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; @@ -530,7 +533,8 @@ int tty_port_block_til_ready(struct tty_port *port, finish_wait(&port->open_wait, &wait); /* Update counts. A parallel hangup will have set count to zero and - we must not mess that up further */ + * we must not mess that up further. + */ spin_lock_irqsave(&port->lock, flags); if (!tty_hung_up_p(filp)) port->count++; @@ -587,7 +591,7 @@ int tty_port_close_start(struct tty_port *port, if (tty_port_initialized(port)) { /* Don't block on a stalled port, just pull the chain */ - if (tty->flow_stopped) + if (tty->flow.tco_stopped) tty_driver_flush_buffer(tty); if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, port->closing_wait); @@ -688,6 +692,7 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty, clear_bit(TTY_IO_ERROR, &tty->flags); if (port->ops->activate) { int retval = port->ops->activate(port, tty); + if (retval) { mutex_unlock(&port->mutex); return retval; @@ -698,5 +703,4 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty, mutex_unlock(&port->mutex); return tty_port_block_til_ready(port, tty, filp); } - EXPORT_SYMBOL(tty_port_open); diff --git a/drivers/tty/ttynull.c b/drivers/tty/ttynull.c index 17f05b7eb6d3..af3311a24917 100644 --- a/drivers/tty/ttynull.c +++ b/drivers/tty/ttynull.c @@ -35,7 +35,7 @@ static int ttynull_write(struct tty_struct *tty, const unsigned char *buf, return count; } -static int ttynull_write_room(struct tty_struct *tty) +static unsigned int ttynull_write_room(struct tty_struct *tty) { return 65536; } diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c index 0c9b291ef307..d06bcc3b4c07 100644 --- a/drivers/tty/vcc.c +++ b/drivers/tty/vcc.c @@ -473,9 +473,9 @@ static struct vio_version vcc_versions[] = { static struct tty_port_operations vcc_port_ops = { 0 }; -static ssize_t vcc_sysfs_domain_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static ssize_t domain_show(struct device *dev, + struct device_attribute *attr, + char *buf) { struct vcc_port *port; int rv; @@ -505,9 +505,9 @@ static int vcc_send_ctl(struct vcc_port *port, int ctl) return rv; } -static ssize_t vcc_sysfs_break_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t break_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct vcc_port *port; unsigned long flags; @@ -530,8 +530,8 @@ static ssize_t vcc_sysfs_break_store(struct device *dev, return rv; } -static DEVICE_ATTR(domain, 0400, vcc_sysfs_domain_show, NULL); -static DEVICE_ATTR(break, 0200, NULL, vcc_sysfs_break_store); +static DEVICE_ATTR_ADMIN_RO(domain); +static DEVICE_ATTR_WO(break); static struct attribute *vcc_sysfs_entries[] = { &dev_attr_domain.attr, @@ -868,10 +868,10 @@ static int vcc_write(struct tty_struct *tty, const unsigned char *buf, return total_sent ? total_sent : rv; } -static int vcc_write_room(struct tty_struct *tty) +static unsigned int vcc_write_room(struct tty_struct *tty) { struct vcc_port *port; - u64 num; + unsigned int num; port = vcc_get_ne(tty->index); if (unlikely(!port)) { @@ -886,10 +886,10 @@ static int vcc_write_room(struct tty_struct *tty) return num; } -static int vcc_chars_in_buffer(struct tty_struct *tty) +static unsigned int vcc_chars_in_buffer(struct tty_struct *tty) { struct vcc_port *port; - u64 num; + unsigned int num; port = vcc_get_ne(tty->index); if (unlikely(!port)) { diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 5d2309742718..4b0d69042ceb 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -515,7 +515,7 @@ static void fn_hold(struct vc_data *vc) * these routines are also activated by ^S/^Q. * (And SCROLLOCK can also be set by the ioctl KDSKBLED.) */ - if (tty->stopped) + if (tty->flow.stopped) start_tty(tty); else stop_tty(tty); diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index f245a5acf7e9..f7755e73696e 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -33,7 +33,7 @@ #include /* Don't take this from : 011-015 on the screen aren't spaces */ -#define isspace(c) ((c) == ' ') +#define is_space_on_vt(c) ((c) == ' ') /* FIXME: all this needs locking */ static struct vc_selection { @@ -109,7 +109,7 @@ static inline int inword(const u32 c) } /** - * set loadlut - load the LUT table + * sel_loadlut() - load the LUT table * @p: user table * * Load the LUT table from user space. The caller must hold the console @@ -209,7 +209,7 @@ static int vc_selection_store_chars(struct vc_data *vc, bool unicode) bp += store_utf8(c, bp); else *bp++ = c; - if (!isspace(c)) + if (!is_space_on_vt(c)) obp = bp; if (!((i + 2) % vc->vc_size_row)) { /* strip trailing blanks from line and add newline, @@ -238,9 +238,9 @@ static int vc_do_selection(struct vc_data *vc, unsigned short mode, int ps, new_sel_end = pe; break; case TIOCL_SELWORD: /* word-by-word selection */ - spc = isspace(sel_pos(ps, unicode)); + spc = is_space_on_vt(sel_pos(ps, unicode)); for (new_sel_start = ps; ; ps -= 2) { - if ((spc && !isspace(sel_pos(ps, unicode))) || + if ((spc && !is_space_on_vt(sel_pos(ps, unicode))) || (!spc && !inword(sel_pos(ps, unicode)))) break; new_sel_start = ps; @@ -248,9 +248,9 @@ static int vc_do_selection(struct vc_data *vc, unsigned short mode, int ps, break; } - spc = isspace(sel_pos(pe, unicode)); + spc = is_space_on_vt(sel_pos(pe, unicode)); for (new_sel_end = pe; ; pe += 2) { - if ((spc && !isspace(sel_pos(pe, unicode))) || + if ((spc && !is_space_on_vt(sel_pos(pe, unicode))) || (!spc && !inword(sel_pos(pe, unicode)))) break; new_sel_end = pe; @@ -276,12 +276,12 @@ static int vc_do_selection(struct vc_data *vc, unsigned short mode, int ps, /* select to end of line if on trailing space */ if (new_sel_end > new_sel_start && !atedge(new_sel_end, vc->vc_size_row) && - isspace(sel_pos(new_sel_end, unicode))) { + is_space_on_vt(sel_pos(new_sel_end, unicode))) { for (pe = new_sel_end + 2; ; pe += 2) - if (!isspace(sel_pos(pe, unicode)) || + if (!is_space_on_vt(sel_pos(pe, unicode)) || atedge(pe, vc->vc_size_row)) break; - if (isspace(sel_pos(pe, unicode))) + if (is_space_on_vt(sel_pos(pe, unicode))) new_sel_end = pe; } if (vc_sel.start == -1) /* no current selection */ diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index fa1548d4f94b..ef981d3b7bb4 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1189,7 +1189,7 @@ static inline int resize_screen(struct vc_data *vc, int width, int height, * information and perform any necessary signal handling. * * Caller must hold the console semaphore. Takes the termios rwsem and - * ctrl_lock of the tty IFF a tty is passed. + * ctrl.lock of the tty IFF a tty is passed. */ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, @@ -1355,7 +1355,7 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) * the actual work. * * Takes the console sem and the called methods then take the tty - * termios_rwsem and the tty ctrl_lock in that order. + * termios_rwsem and the tty ctrl.lock in that order. */ static int vt_resize(struct tty_struct *tty, struct winsize *ws) { @@ -2888,7 +2888,7 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co param.vc = vc; - while (!tty->stopped && count) { + while (!tty->flow.stopped && count) { int orig = *buf; buf++; n++; @@ -3260,23 +3260,16 @@ static int con_write(struct tty_struct *tty, const unsigned char *buf, int count static int con_put_char(struct tty_struct *tty, unsigned char ch) { - if (in_interrupt()) - return 0; /* n_r3964 calls put_char() from interrupt context */ return do_con_write(tty, &ch, 1); } -static int con_write_room(struct tty_struct *tty) +static unsigned int con_write_room(struct tty_struct *tty) { - if (tty->stopped) + if (tty->flow.stopped) return 0; return 32768; /* No limit, really; we're not buffering */ } -static int con_chars_in_buffer(struct tty_struct *tty) -{ - return 0; /* we're not buffering */ -} - /* * con_throttle and con_unthrottle are only used for * paste_selection(), which has to stuff in a large number of @@ -3523,7 +3516,6 @@ static const struct tty_operations con_ops = { .write_room = con_write_room, .put_char = con_put_char, .flush_chars = con_flush_chars, - .chars_in_buffer = con_chars_in_buffer, .ioctl = vt_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = vt_compat_ioctl, diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index ca7a61190dd9..c9954eb56e00 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -838,7 +838,7 @@ static int acm_tty_write(struct tty_struct *tty, return count; } -static int acm_tty_write_room(struct tty_struct *tty) +static unsigned int acm_tty_write_room(struct tty_struct *tty) { struct acm *acm = tty->driver_data; /* @@ -848,7 +848,7 @@ static int acm_tty_write_room(struct tty_struct *tty) return acm_wb_is_avail(acm) ? acm->writesize : 0; } -static int acm_tty_chars_in_buffer(struct tty_struct *tty) +static unsigned int acm_tty_chars_in_buffer(struct tty_struct *tty) { struct acm *acm = tty->driver_data; /* @@ -1056,21 +1056,8 @@ static void acm_tty_set_termios(struct tty_struct *tty, newline.bParityType = termios->c_cflag & PARENB ? (termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; - switch (termios->c_cflag & CSIZE) { - case CS5: - newline.bDataBits = 5; - break; - case CS6: - newline.bDataBits = 6; - break; - case CS7: - newline.bDataBits = 7; - break; - case CS8: - default: - newline.bDataBits = 8; - break; - } + newline.bDataBits = tty_get_char_size(termios->c_cflag); + /* FIXME: Needs to clear unsupported bits in the termios */ acm->clocal = ((termios->c_cflag & CLOCAL) != 0); diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 1e59204ec7aa..bffef8e47dac 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -774,34 +774,34 @@ static void gs_flush_chars(struct tty_struct *tty) spin_unlock_irqrestore(&port->port_lock, flags); } -static int gs_write_room(struct tty_struct *tty) +static unsigned int gs_write_room(struct tty_struct *tty) { struct gs_port *port = tty->driver_data; unsigned long flags; - int room = 0; + unsigned int room = 0; spin_lock_irqsave(&port->port_lock, flags); if (port->port_usb) room = kfifo_avail(&port->port_write_buf); spin_unlock_irqrestore(&port->port_lock, flags); - pr_vdebug("gs_write_room: (%d,%p) room=%d\n", + pr_vdebug("gs_write_room: (%d,%p) room=%u\n", port->port_num, tty, room); return room; } -static int gs_chars_in_buffer(struct tty_struct *tty) +static unsigned int gs_chars_in_buffer(struct tty_struct *tty) { struct gs_port *port = tty->driver_data; unsigned long flags; - int chars = 0; + unsigned int chars; spin_lock_irqsave(&port->port_lock, flags); chars = kfifo_len(&port->port_write_buf); spin_unlock_irqrestore(&port->port_lock, flags); - pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%d\n", + pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%u\n", port->port_num, tty, chars); return chars; diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index ae4e4ab638b5..bef104511352 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -240,11 +240,11 @@ static void dbc_tty_flush_chars(struct tty_struct *tty) spin_unlock_irqrestore(&port->port_lock, flags); } -static int dbc_tty_write_room(struct tty_struct *tty) +static unsigned int dbc_tty_write_room(struct tty_struct *tty) { struct dbc_port *port = tty->driver_data; unsigned long flags; - int room = 0; + unsigned int room; spin_lock_irqsave(&port->port_lock, flags); room = kfifo_avail(&port->write_fifo); @@ -253,11 +253,11 @@ static int dbc_tty_write_room(struct tty_struct *tty) return room; } -static int dbc_tty_chars_in_buffer(struct tty_struct *tty) +static unsigned int dbc_tty_chars_in_buffer(struct tty_struct *tty) { struct dbc_port *port = tty->driver_data; unsigned long flags; - int chars = 0; + unsigned int chars; spin_lock_irqsave(&port->port_lock, flags); chars = kfifo_len(&port->write_fifo); diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index ed9193f3bb1a..8107e4b5b03b 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -356,25 +356,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty, /* set the number of data bits */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - switch (cflag & CSIZE) { - case CS5: - urb_value = BELKIN_SA_DATA_BITS(5); - break; - case CS6: - urb_value = BELKIN_SA_DATA_BITS(6); - break; - case CS7: - urb_value = BELKIN_SA_DATA_BITS(7); - break; - case CS8: - urb_value = BELKIN_SA_DATA_BITS(8); - break; - default: - dev_dbg(&port->dev, - "CSIZE was not CS5-CS8, using default of 8\n"); - urb_value = BELKIN_SA_DATA_BITS(8); - break; - } + urb_value = BELKIN_SA_DATA_BITS(tty_get_char_size(cflag)); if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0) dev_err(&port->dev, "Set data bits error\n"); } diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 166ee2286fda..55f23df03e0b 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -326,7 +326,7 @@ static int cypress_serial_control(struct tty_struct *tty, /* fill the feature_buffer with new configuration */ put_unaligned_le32(new_baudrate, feature_buffer); - feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */ + feature_buffer[4] |= data_bits - 5; /* assign data bits in 2 bit space ( max 3 ) */ /* 1 bit gap */ feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */ feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */ @@ -887,23 +887,8 @@ static void cypress_set_termios(struct tty_struct *tty, } else parity_enable = parity_type = 0; - switch (cflag & CSIZE) { - case CS5: - data_bits = 0; - break; - case CS6: - data_bits = 1; - break; - case CS7: - data_bits = 2; - break; - case CS8: - data_bits = 3; - break; - default: - dev_err(dev, "%s - CSIZE was set, but not CS5-CS8\n", __func__); - data_bits = 3; - } + data_bits = tty_get_char_size(cflag); + spin_lock_irqsave(&priv->lock, flags); oldlines = priv->line_control; if ((cflag & CBAUD) == B0) { diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 940050c31482..2f2f5047452b 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -789,20 +789,7 @@ static void pl2303_set_termios(struct tty_struct *tty, pl2303_get_line_request(port, buf); - switch (C_CSIZE(tty)) { - case CS5: - buf[6] = 5; - break; - case CS6: - buf[6] = 6; - break; - case CS7: - buf[6] = 7; - break; - default: - case CS8: - buf[6] = 8; - } + buf[6] = tty_get_char_size(tty->termios.c_cflag); dev_dbg(&port->dev, "data bits = %d\n", buf[6]); /* For reference buf[0]:buf[3] baud rate value */ diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 98b33b1b5357..eeb441c77207 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -376,7 +376,7 @@ exit: return retval; } -static int serial_write_room(struct tty_struct *tty) +static unsigned int serial_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -385,7 +385,7 @@ static int serial_write_room(struct tty_struct *tty) return port->serial->type->write_room(tty); } -static int serial_chars_in_buffer(struct tty_struct *tty) +static unsigned int serial_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 5116ed9db3eb..da65d14c9ed5 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -625,14 +625,7 @@ static void firm_setup_port(struct tty_struct *tty) port_settings.port = port->port_number + 1; - /* get the byte size */ - switch (cflag & CSIZE) { - case CS5: port_settings.bits = 5; break; - case CS6: port_settings.bits = 6; break; - case CS7: port_settings.bits = 7; break; - default: - case CS8: port_settings.bits = 8; break; - } + port_settings.bits = tty_get_char_size(cflag); dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits); /* determine the parity */ diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h deleted file mode 100644 index 90a803aa42e8..000000000000 --- a/include/linux/n_r3964.h +++ /dev/null @@ -1,175 +0,0 @@ -/* r3964 linediscipline for linux - * - * ----------------------------------------------------------- - * Copyright by - * Philips Automation Projects - * Kassel (Germany) - * ----------------------------------------------------------- - * This software may be used and distributed according to the terms of - * the GNU General Public License, incorporated herein by reference. - * - * Author: - * L. Haag - * - * $Log: r3964.h,v $ - * Revision 1.4 2005/12/21 19:54:24 Kurt Huwig - * Fixed HZ usage on 2.6 kernels - * Removed unnecessary include - * - * Revision 1.3 2001/03/18 13:02:24 dwmw2 - * Fix timer usage, use spinlocks properly. - * - * Revision 1.2 2001/03/18 12:53:15 dwmw2 - * Merge changes in 2.4.2 - * - * Revision 1.1.1.1 1998/10/13 16:43:14 dwmw2 - * This'll screw the version control - * - * Revision 1.6 1998/09/30 00:40:38 dwmw2 - * Updated to use kernel's N_R3964 if available - * - * Revision 1.4 1998/04/02 20:29:44 lhaag - * select, blocking, ... - * - * Revision 1.3 1998/02/12 18:58:43 root - * fixed some memory leaks - * calculation of checksum characters - * - * Revision 1.2 1998/02/07 13:03:17 root - * ioctl read_telegram - * - * Revision 1.1 1998/02/06 19:19:43 root - * Initial revision - * - * - */ -#ifndef __LINUX_N_R3964_H__ -#define __LINUX_N_R3964_H__ - - -#include -#include - -/* - * Common ascii handshake characters: - */ - -#define STX 0x02 -#define ETX 0x03 -#define DLE 0x10 -#define NAK 0x15 - -/* - * Timeouts (from milliseconds to jiffies) - */ - -#define R3964_TO_QVZ ((550)*HZ/1000) -#define R3964_TO_ZVZ ((220)*HZ/1000) -#define R3964_TO_NO_BUF ((400)*HZ/1000) -#define R3964_NO_TX_ROOM ((100)*HZ/1000) -#define R3964_TO_RX_PANIC ((4000)*HZ/1000) -#define R3964_MAX_RETRIES 5 - - -enum { R3964_IDLE, - R3964_TX_REQUEST, R3964_TRANSMITTING, - R3964_WAIT_ZVZ_BEFORE_TX_RETRY, R3964_WAIT_FOR_TX_ACK, - R3964_WAIT_FOR_RX_BUF, - R3964_RECEIVING, R3964_WAIT_FOR_BCC, R3964_WAIT_FOR_RX_REPEAT - }; - -/* - * All open file-handles are 'clients' and are stored in a linked list: - */ - -struct r3964_message; - -struct r3964_client_info { - spinlock_t lock; - struct pid *pid; - unsigned int sig_flags; - - struct r3964_client_info *next; - - struct r3964_message *first_msg; - struct r3964_message *last_msg; - struct r3964_block_header *next_block_to_read; - int msg_count; -}; - - - -struct r3964_block_header; - -/* internal version of client_message: */ -struct r3964_message { - int msg_id; - int arg; - int error_code; - struct r3964_block_header *block; - struct r3964_message *next; -}; - -/* - * Header of received block in rx_buf/tx_buf: - */ - -struct r3964_block_header -{ - unsigned int length; /* length in chars without header */ - unsigned char *data; /* usually data is located - immediately behind this struct */ - unsigned int locks; /* only used in rx_buffer */ - - struct r3964_block_header *next; - struct r3964_client_info *owner; /* =NULL in rx_buffer */ -}; - -/* - * If rx_buf hasn't enough space to store R3964_MTU chars, - * we will reject all incoming STX-requests by sending NAK. - */ - -#define RX_BUF_SIZE 4000 -#define TX_BUF_SIZE 4000 -#define R3964_MAX_BLOCKS_IN_RX_QUEUE 100 - -#define R3964_PARITY 0x0001 -#define R3964_FRAME 0x0002 -#define R3964_OVERRUN 0x0004 -#define R3964_UNKNOWN 0x0008 -#define R3964_BREAK 0x0010 -#define R3964_CHECKSUM 0x0020 -#define R3964_ERROR 0x003f -#define R3964_BCC 0x4000 -#define R3964_DEBUG 0x8000 - - -struct r3964_info { - spinlock_t lock; - struct tty_struct *tty; - unsigned char priority; - unsigned char *rx_buf; /* ring buffer */ - unsigned char *tx_buf; - - struct r3964_block_header *rx_first; - struct r3964_block_header *rx_last; - struct r3964_block_header *tx_first; - struct r3964_block_header *tx_last; - unsigned int tx_position; - unsigned int rx_position; - unsigned char last_rx; - unsigned char bcc; - unsigned int blocks_in_rx_queue; - - struct mutex read_lock; /* serialize r3964_read */ - - struct r3964_client_info *firstClient; - unsigned int state; - unsigned int flags; - - struct timer_list tmr; - int nRetry; -}; - -#endif diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 9e655055112d..5db211f43b29 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -146,7 +146,7 @@ static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up) return container_of(up, struct uart_8250_port, port); } -int serial8250_register_8250_port(struct uart_8250_port *); +int serial8250_register_8250_port(const struct uart_8250_port *); void serial8250_unregister_port(int line); void serial8250_suspend_port(int line); void serial8250_resume_port(int line); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index d7ed00f1594e..52d7fb92a69d 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -408,7 +408,8 @@ int uart_register_driver(struct uart_driver *uart); void uart_unregister_driver(struct uart_driver *uart); int uart_add_one_port(struct uart_driver *reg, struct uart_port *port); int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port); -int uart_match_port(struct uart_port *port1, struct uart_port *port2); +bool uart_match_port(const struct uart_port *port1, + const struct uart_port *port2); /* * Power Management @@ -428,7 +429,7 @@ int uart_resume_port(struct uart_driver *reg, struct uart_port *port); static inline int uart_tx_stopped(struct uart_port *port) { struct tty_struct *tty = port->state->port.tty; - if ((tty && tty->stopped) || port->hw_stopped) + if ((tty && tty->flow.stopped) || port->hw_stopped) return 1; return 0; } diff --git a/include/linux/tty.h b/include/linux/tty.h index e5d6b1f28823..19dc1097e09c 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -243,20 +243,29 @@ struct tty_port { #define TTY_PORT_KOPENED 5 /* device exclusively opened by kernel */ -/* - * Where all of the state associated with a tty is kept while the tty - * is open. Since the termios state should be kept even if the tty - * has been closed --- for things like the baud rate, etc --- it is - * not stored here, but rather a pointer to the real state is stored - * here. Possible the winsize structure should have the same - * treatment, but (1) the default 80x24 is usually right and (2) it's - * most often used by a windowing system, which will set the correct - * size each time the window is created or resized anyway. - * - TYT, 9/14/92 - */ - struct tty_operations; +/** + * struct tty_struct - state associated with a tty while open + * + * @flow.lock: lock for flow members + * @flow.stopped: tty stopped/started by tty_stop/tty_start + * @flow.tco_stopped: tty stopped/started by TCOOFF/TCOON ioctls (it has + * precedense over @flow.stopped) + * @flow.unused: alignment for Alpha, so that no members other than @flow.* are + * modified by the same 64b word store. The @flow's __aligned is + * there for the very same reason. + * @ctrl.lock: lock for ctrl members + * @ctrl.pgrp: process group of this tty (setpgrp(2)) + * @ctrl.session: session of this tty (setsid(2)). Writes are protected by both + * @ctrl.lock and legacy mutex, readers must use at least one of + * them. + * @ctrl.pktstatus: packet mode status (bitwise OR of TIOCPKT_* constants) + * @ctrl.packet: packet mode enabled + * + * All of the state associated with a tty while the tty is open. Persistent + * storage for tty devices is referenced here as @port in struct tty_port. + */ struct tty_struct { int magic; struct kref kref; @@ -274,27 +283,30 @@ struct tty_struct { struct mutex throttle_mutex; struct rw_semaphore termios_rwsem; struct mutex winsize_mutex; - spinlock_t ctrl_lock; - spinlock_t flow_lock; /* Termios values are protected by the termios rwsem */ struct ktermios termios, termios_locked; char name[64]; - struct pid *pgrp; /* Protected by ctrl lock */ - /* - * Writes protected by both ctrl lock and legacy mutex, readers must use - * at least one of them. - */ - struct pid *session; unsigned long flags; int count; struct winsize winsize; /* winsize_mutex */ - unsigned long stopped:1, /* flow_lock */ - flow_stopped:1, - unused:BITS_PER_LONG - 2; + + struct { + spinlock_t lock; + bool stopped; + bool tco_stopped; + unsigned long unused[0]; + } __aligned(sizeof(unsigned long)) flow; + + struct { + spinlock_t lock; + struct pid *pgrp; + struct pid *session; + unsigned char pktstatus; + bool packet; + unsigned long unused[0]; + } __aligned(sizeof(unsigned long)) ctrl; + int hw_stopped; - unsigned long ctrl_status:8, /* ctrl_lock */ - packet:1, - unused_ctrl:BITS_PER_LONG - 9; unsigned int receive_room; /* Bytes free for queue */ int flow_change; @@ -446,10 +458,9 @@ extern void tty_unregister_device(struct tty_driver *driver, unsigned index); extern void tty_write_message(struct tty_struct *tty, char *msg); extern int tty_send_xchar(struct tty_struct *tty, char ch); extern int tty_put_char(struct tty_struct *tty, unsigned char c); -extern int tty_chars_in_buffer(struct tty_struct *tty); -extern int tty_write_room(struct tty_struct *tty); +extern unsigned int tty_chars_in_buffer(struct tty_struct *tty); +extern unsigned int tty_write_room(struct tty_struct *tty); extern void tty_driver_flush_buffer(struct tty_struct *tty); -extern void tty_throttle(struct tty_struct *tty); extern void tty_unthrottle(struct tty_struct *tty); extern int tty_throttle_safe(struct tty_struct *tty); extern int tty_unthrottle_safe(struct tty_struct *tty); @@ -484,6 +495,9 @@ static inline speed_t tty_get_baud_rate(struct tty_struct *tty) return tty_termios_baud_rate(&tty->termios); } +unsigned char tty_get_char_size(unsigned int cflag); +unsigned char tty_get_frame_size(unsigned int cflag); + extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); extern int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b); extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); @@ -624,11 +638,11 @@ static inline int tty_port_users(struct tty_port *port) return port->count + port->blocked_open; } -extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc); -extern int tty_unregister_ldisc(int disc); +extern int tty_register_ldisc(struct tty_ldisc_ops *new_ldisc); +extern void tty_unregister_ldisc(struct tty_ldisc_ops *ldisc); extern int tty_set_ldisc(struct tty_struct *tty, int disc); extern int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p, - char *f, int count); + const char *f, int count); /* n_tty.c */ extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops); diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 2f719b471d52..448f8ee6db6e 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -89,7 +89,7 @@ * * Note: Do not call this function directly, call tty_driver_flush_chars * - * int (*write_room)(struct tty_struct *tty); + * unsigned int (*write_room)(struct tty_struct *tty); * * This routine returns the numbers of characters the tty driver * will accept for queuing to be written. This number is subject @@ -136,7 +136,7 @@ * the line discipline are close to full, and it should somehow * signal that no more characters should be sent to the tty. * - * Optional: Always invoke via tty_throttle(), called under the + * Optional: Always invoke via tty_throttle_safe(), called under the * termios lock. * * void (*unthrottle)(struct tty_struct * tty); @@ -153,7 +153,7 @@ * This routine notifies the tty driver that it should stop * outputting characters to the tty device. * - * Called with ->flow_lock held. Serialized with start() method. + * Called with ->flow.lock held. Serialized with start() method. * * Optional: * @@ -164,7 +164,7 @@ * This routine notifies the tty driver that it resume sending * characters to the tty device. * - * Called with ->flow_lock held. Serialized with stop() method. + * Called with ->flow.lock held. Serialized with stop() method. * * Optional: * @@ -256,8 +256,8 @@ struct tty_operations { const unsigned char *buf, int count); int (*put_char)(struct tty_struct *tty, unsigned char ch); void (*flush_chars)(struct tty_struct *tty); - int (*write_room)(struct tty_struct *tty); - int (*chars_in_buffer)(struct tty_struct *tty); + unsigned int (*write_room)(struct tty_struct *tty); + unsigned int (*chars_in_buffer)(struct tty_struct *tty); int (*ioctl)(struct tty_struct *tty, unsigned int cmd, unsigned long arg); long (*compat_ioctl)(struct tty_struct *tty, diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h index 767f62086bd9..67d78dc553e1 100644 --- a/include/linux/tty_flip.h +++ b/include/linux/tty_flip.h @@ -2,8 +2,10 @@ #ifndef _LINUX_TTY_FLIP_H #define _LINUX_TTY_FLIP_H +#include + extern int tty_buffer_set_limit(struct tty_port *port, int limit); -extern int tty_buffer_space_avail(struct tty_port *port); +extern unsigned int tty_buffer_space_avail(struct tty_port *port); extern int tty_buffer_request_room(struct tty_port *port, size_t size); extern int tty_insert_flip_string_flags(struct tty_port *port, const unsigned char *chars, const char *flags, size_t size); diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index 31284b55bd4f..fbe9de278629 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -201,15 +201,13 @@ struct tty_ldisc_ops { * The following routines are called from below. */ void (*receive_buf)(struct tty_struct *, const unsigned char *cp, - char *fp, int count); + const char *fp, int count); void (*write_wakeup)(struct tty_struct *); void (*dcd_change)(struct tty_struct *, unsigned int); int (*receive_buf2)(struct tty_struct *, const unsigned char *cp, - char *fp, int count); + const char *fp, int count); struct module *owner; - - int refcount; }; struct tty_ldisc { diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 94e7a315479c..0da94a6dee15 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -166,7 +166,6 @@ int vt_get_kbd_mode_bit(int console, int bit); void vt_set_kbd_mode_bit(int console, int bit); void vt_clr_kbd_mode_bit(int console, int bit); void vt_set_led_state(int console, int leds); -void vt_set_led_state(int console, int leds); void vt_kbd_con_start(int console); void vt_kbd_con_stop(int console); diff --git a/include/uapi/linux/n_r3964.h b/include/uapi/linux/n_r3964.h deleted file mode 100644 index 6bbd18520f30..000000000000 --- a/include/uapi/linux/n_r3964.h +++ /dev/null @@ -1,99 +0,0 @@ -/* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */ -/* r3964 linediscipline for linux - * - * ----------------------------------------------------------- - * Copyright by - * Philips Automation Projects - * Kassel (Germany) - * ----------------------------------------------------------- - * This software may be used and distributed according to the terms of - * the GNU General Public License, incorporated herein by reference. - * - * Author: - * L. Haag - * - * $Log: r3964.h,v $ - * Revision 1.4 2005/12/21 19:54:24 Kurt Huwig - * Fixed HZ usage on 2.6 kernels - * Removed unnecessary include - * - * Revision 1.3 2001/03/18 13:02:24 dwmw2 - * Fix timer usage, use spinlocks properly. - * - * Revision 1.2 2001/03/18 12:53:15 dwmw2 - * Merge changes in 2.4.2 - * - * Revision 1.1.1.1 1998/10/13 16:43:14 dwmw2 - * This'll screw the version control - * - * Revision 1.6 1998/09/30 00:40:38 dwmw2 - * Updated to use kernel's N_R3964 if available - * - * Revision 1.4 1998/04/02 20:29:44 lhaag - * select, blocking, ... - * - * Revision 1.3 1998/02/12 18:58:43 root - * fixed some memory leaks - * calculation of checksum characters - * - * Revision 1.2 1998/02/07 13:03:17 root - * ioctl read_telegram - * - * Revision 1.1 1998/02/06 19:19:43 root - * Initial revision - * - * - */ - -#ifndef _UAPI__LINUX_N_R3964_H__ -#define _UAPI__LINUX_N_R3964_H__ - -/* line disciplines for r3964 protocol */ - - -/* - * Ioctl-commands - */ - -#define R3964_ENABLE_SIGNALS 0x5301 -#define R3964_SETPRIORITY 0x5302 -#define R3964_USE_BCC 0x5303 -#define R3964_READ_TELEGRAM 0x5304 - -/* Options for R3964_SETPRIORITY */ -#define R3964_MASTER 0 -#define R3964_SLAVE 1 - -/* Options for R3964_ENABLE_SIGNALS */ -#define R3964_SIG_ACK 0x0001 -#define R3964_SIG_DATA 0x0002 -#define R3964_SIG_ALL 0x000f -#define R3964_SIG_NONE 0x0000 -#define R3964_USE_SIGIO 0x1000 - -/* - * r3964 operation states: - */ - -/* types for msg_id: */ -enum {R3964_MSG_ACK=1, R3964_MSG_DATA }; - -#define R3964_MAX_MSG_COUNT 32 - -/* error codes for client messages */ -#define R3964_OK 0 /* no error. */ -#define R3964_TX_FAIL -1 /* transmission error, block NOT sent */ -#define R3964_OVERFLOW -2 /* msg queue overflow */ - -/* the client gets this struct when calling read(fd,...): */ -struct r3964_client_message { - int msg_id; - int arg; - int error_code; -}; - -#define R3964_MTU 256 - - - -#endif /* _UAPI__LINUX_N_R3964_H__ */ diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 8cb53e10a985..4e095746e002 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -809,7 +809,7 @@ static int rfcomm_tty_write(struct tty_struct *tty, const unsigned char *buf, in return sent; } -static int rfcomm_tty_write_room(struct tty_struct *tty) +static unsigned int rfcomm_tty_write_room(struct tty_struct *tty) { struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data; int room = 0; @@ -1012,7 +1012,7 @@ static void rfcomm_tty_unthrottle(struct tty_struct *tty) rfcomm_dlc_unthrottle(dev->dlc); } -static int rfcomm_tty_chars_in_buffer(struct tty_struct *tty) +static unsigned int rfcomm_tty_chars_in_buffer(struct tty_struct *tty) { struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data; diff --git a/net/nfc/nci/uart.c b/net/nfc/nci/uart.c index 1248faf4d6df..502e7a3f8948 100644 --- a/net/nfc/nci/uart.c +++ b/net/nfc/nci/uart.c @@ -308,7 +308,7 @@ static int nci_uart_default_recv_buf(struct nci_uart *nu, const u8 *data, * Return Value: None */ static void nci_uart_tty_receive(struct tty_struct *tty, const u8 *data, - char *flags, int count) + const char *flags, int count) { struct nci_uart *nu = (void *)tty->disc_data; @@ -442,6 +442,7 @@ EXPORT_SYMBOL_GPL(nci_uart_set_config); static struct tty_ldisc_ops nci_uart_ldisc = { .owner = THIS_MODULE, + .num = N_NCI, .name = "n_nci", .open = nci_uart_tty_open, .close = nci_uart_tty_close, @@ -456,12 +457,12 @@ static struct tty_ldisc_ops nci_uart_ldisc = { static int __init nci_uart_init(void) { - return tty_register_ldisc(N_NCI, &nci_uart_ldisc); + return tty_register_ldisc(&nci_uart_ldisc); } static void __exit nci_uart_exit(void) { - tty_unregister_ldisc(N_NCI); + tty_unregister_ldisc(&nci_uart_ldisc); } module_init(nci_uart_init); diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c index 61dfa86d444d..ec8d6e74b467 100644 --- a/sound/soc/codecs/cx20442.c +++ b/sound/soc/codecs/cx20442.c @@ -259,8 +259,8 @@ static int v253_hangup(struct tty_struct *tty) } /* Line discipline .receive_buf() */ -static void v253_receive(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void v253_receive(struct tty_struct *tty, const unsigned char *cp, + const char *fp, int count) { struct snd_soc_component *component = tty->disc_data; struct cx20442_priv *cx20442; diff --git a/sound/soc/ti/ams-delta.c b/sound/soc/ti/ams-delta.c index aba0017e870b..ecd24d412a9b 100644 --- a/sound/soc/ti/ams-delta.c +++ b/sound/soc/ti/ams-delta.c @@ -337,8 +337,8 @@ static int cx81801_hangup(struct tty_struct *tty) } /* Line discipline .receive_buf() */ -static void cx81801_receive(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void cx81801_receive(struct tty_struct *tty, const unsigned char *cp, + const char *fp, int count) { struct snd_soc_component *component = tty->disc_data; const unsigned char *c; @@ -396,6 +396,7 @@ static void cx81801_wakeup(struct tty_struct *tty) static struct tty_ldisc_ops cx81801_ops = { .name = "cx81801", + .num = N_V253, .owner = THIS_MODULE, .open = cx81801_open, .close = cx81801_close, @@ -503,7 +504,7 @@ static int ams_delta_cx20442_init(struct snd_soc_pcm_runtime *rtd) } /* Register optional line discipline for over the modem control */ - ret = tty_register_ldisc(N_V253, &cx81801_ops); + ret = tty_register_ldisc(&cx81801_ops); if (ret) { dev_warn(card->dev, "Failed to register line discipline, " @@ -582,9 +583,7 @@ static int ams_delta_remove(struct platform_device *pdev) { struct snd_soc_card *card = platform_get_drvdata(pdev); - if (tty_unregister_ldisc(N_V253) != 0) - dev_warn(&pdev->dev, - "failed to unregister V253 line discipline\n"); + tty_unregister_ldisc(&cx81801_ops); snd_soc_unregister_card(card); card->dev = NULL;