media: v4l: omap3isp: Get the parallel bus type from DT

The OMAP3 ISP supports both external and embedded BT.656 synchronization
for parallel buses. It currently gets the bus type information from the
source subdev through the .g_mbus_config() operation, but should instead
get it from DT as that's the authoritative source of bus configuration
information.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Laurent Pinchart 2017-07-18 11:51:35 -04:00 committed by Mauro Carvalho Chehab
parent 52740975f3
commit c8dbe3181b
3 changed files with 4 additions and 7 deletions

View File

@ -2042,6 +2042,7 @@ static int isp_fwnode_parse(struct device *dev, struct fwnode_handle *fwnode,
!!(vep.bus.parallel.flags & V4L2_MBUS_FIELD_EVEN_LOW);
buscfg->bus.parallel.data_pol =
!!(vep.bus.parallel.flags & V4L2_MBUS_DATA_ACTIVE_LOW);
buscfg->bus.parallel.bt656 = vep.bus_type == V4L2_MBUS_BT656;
break;
case ISP_OF_PHY_CSIPHY1:

View File

@ -1139,15 +1139,9 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc)
pad = media_entity_remote_pad(&ccdc->pads[CCDC_PAD_SINK]);
sensor = media_entity_to_v4l2_subdev(pad->entity);
if (ccdc->input == CCDC_INPUT_PARALLEL) {
struct v4l2_mbus_config cfg;
int ret;
ret = v4l2_subdev_call(sensor, video, g_mbus_config, &cfg);
if (!ret)
ccdc->bt656 = cfg.type == V4L2_MBUS_BT656;
parcfg = &((struct isp_bus_cfg *)sensor->host_priv)
->bus.parallel;
ccdc->bt656 = parcfg->bt656;
}
/* CCDC_PAD_SINK */

View File

@ -46,6 +46,7 @@ enum isp_interface_type {
* 0 - Positive, 1 - Negative
* @data_pol: Data polarity
* 0 - Normal, 1 - One's complement
* @bt656: Data contain BT.656 embedded synchronization
*/
struct isp_parallel_cfg {
unsigned int data_lane_shift:3;
@ -54,6 +55,7 @@ struct isp_parallel_cfg {
unsigned int vs_pol:1;
unsigned int fld_pol:1;
unsigned int data_pol:1;
unsigned int bt656:1;
};
enum {