hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

pinctrl: aspeed: Allow disabling Port D and Port E loopback mode 

Port D and port E GPIO loopback modes are commonly enabled via hardware
straps for use with front-panel buttons.  When the BMC is powered
off or fails to boot, the front-panel buttons are directly connected to
the host chipset via the loopback to allow direct power-on and reset
control. Once the BMC has booted, the loopback mode must be disabled for
the BMC to take over control of host power-on and reset.

Disabling these loopback modes requires writing to the hardware strap
register which violates the current design of assuming the system
designer chose the strap settings for a specific reason and they should
be treated as read-only. Only the two bits of the strap register related
to these loopback modes are allowed to be written and comments have been
added to explain why.

Signed-off-by: Rick Altherr <raltherr@google.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Rick Altherr 2017-02-14 22:09:14 -08:00 committed by Linus Walleij
parent 3818e4a767
commit c825676b08
1 changed files with 12 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
drivers/pinctrl/aspeed/pinctrl-aspeed.c
View File

@ -198,9 +198,19 @@ static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
* them. This may mean that certain functions cannot be
* deconfigured and is the reason we re-evaluate after writing
* all descriptor bits.
*
* Port D and port E GPIO loopback modes are the only exception
* as those are commonly used with front-panel buttons to allow
* normal operation of the host when the BMC is powered off or
* fails to boot. Once the BMC has booted, the loopback mode
* must be disabled for the BMC to control host power-on and
* reset.
*/
if ((desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2) &&
desc->ip == ASPEED_IP_SCU)
if (desc->ip == ASPEED_IP_SCU && desc->reg == HW_STRAP1 &&
!(desc->mask & (BIT(21) | BIT(22))))
continue;
if (desc->ip == ASPEED_IP_SCU && desc->reg == HW_STRAP2)
continue;
ret = regmap_update_bits(maps[desc->ip], desc->reg,