hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ARM: ux500: Assign proper sensor IRQs for Snowball 

The Snowball gyro and magnetometer DRDY (data ready) lines are used
as interrupt triggers by the IIO subsystem, triggering new data
retrieveal on edges on this signal. Thus assign them as the primary
interrupt in the device tree. The "other interrupt" coming out of
the sensors is for alarms and similar complex events, the DRDY is
for periodic measures, which is what we want.

After this the generic_buffer tool from IIO tools gives a nice
stream of readings after enabling the desired channels in sysfs.

Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Linus Walleij 2015-11-05 10:18:14 +01:00
parent 250656b4bc
commit c80b4010d7
1 changed files with 4 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
arch/arm/boot/dts/ste-snowball.dts
View File

@ -281,7 +281,8 @@
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&magneto_snowball_mode>;
gpios = <&gpio5 5 0x4>; /* DRDY line */
interrupt-parent = <&gpio5>;
interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
};
l3g4200d@68 {
/* Gyroscope */
@ -292,9 +293,9 @@
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&gyro_snowball_mode>;
gpios = <&gpio5 6 0x4>; /* DRDY line */
interrupt-parent = <&gpio5>;
interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
<9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
};
lsp001wm@5c {
/* Barometer/pressure sensor */