ALSA: doc: ReSTize hdspm.txt
A simple conversion from a plain text file. Quite a few reformatting in the end due to the style of the original document. Put to cards directory. Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Takashi Iwai
parent
a02f5895ee
commit
c79b5bb0a3
|
|
@ -1,8 +1,10 @@
|
|||
=======================================
|
||||
Software Interface ALSA-DSP MADI Driver
|
||||
=======================================
|
||||
|
||||
(translated from German, so no good English ;-),
|
||||
2004 - winfried ritsch
|
||||
|
||||
2004 - winfried ritsch
|
||||
|
||||
|
||||
Full functionality has been added to the driver. Since some of
|
||||
|
|
@ -10,12 +12,13 @@ Software Interface ALSA-DSP MADI Driver
|
|||
special Controls are described and discussed below.
|
||||
|
||||
|
||||
hardware functionality:
|
||||
Hardware functionality
|
||||
======================
|
||||
|
||||
Audio transmission
|
||||
------------------
|
||||
|
||||
Audio transmission:
|
||||
|
||||
number of channels -- depends on transmission mode
|
||||
* number of channels -- depends on transmission mode
|
||||
|
||||
The number of channels chosen is from 1..Nmax. The reason to
|
||||
use for a lower number of channels is only resource allocation,
|
||||
|
|
@ -23,31 +26,34 @@ Software Interface ALSA-DSP MADI Driver
|
|||
allocated. So also the throughput of the PCI system can be
|
||||
scaled. (Only important for low performance boards).
|
||||
|
||||
Single Speed -- 1..64 channels
|
||||
* Single Speed -- 1..64 channels
|
||||
|
||||
.. note::
|
||||
(Note: Choosing the 56channel mode for transmission or as
|
||||
receiver, only 56 are transmitted/received over the MADI, but
|
||||
all 64 channels are available for the mixer, so channel count
|
||||
for the driver)
|
||||
|
||||
Double Speed -- 1..32 channels
|
||||
* Double Speed -- 1..32 channels
|
||||
|
||||
.. note::
|
||||
Note: Choosing the 56-channel mode for
|
||||
transmission/receive-mode , only 28 are transmitted/received
|
||||
over the MADI, but all 32 channels are available for the mixer,
|
||||
so channel count for the driver
|
||||
|
||||
|
||||
Quad Speed -- 1..16 channels
|
||||
* Quad Speed -- 1..16 channels
|
||||
|
||||
Note: Choosing the 56-channel mode for
|
||||
.. note::
|
||||
Choosing the 56-channel mode for
|
||||
transmission/receive-mode , only 14 are transmitted/received
|
||||
over the MADI, but all 16 channels are available for the mixer,
|
||||
so channel count for the driver
|
||||
|
||||
Format -- signed 32 Bit Little Endian (SNDRV_PCM_FMTBIT_S32_LE)
|
||||
* Format -- signed 32 Bit Little Endian (SNDRV_PCM_FMTBIT_S32_LE)
|
||||
|
||||
Sample Rates --
|
||||
* Sample Rates --
|
||||
|
||||
Single Speed -- 32000, 44100, 48000
|
||||
|
||||
|
|
@ -55,14 +61,13 @@ Software Interface ALSA-DSP MADI Driver
|
|||
|
||||
Quad Speed -- 128000, 176400, 192000 (untested)
|
||||
|
||||
access-mode -- MMAP (memory mapped), Not interleaved
|
||||
(PCM_NON-INTERLEAVED)
|
||||
* access-mode -- MMAP (memory mapped), Not interleaved (PCM_NON-INTERLEAVED)
|
||||
|
||||
buffer-sizes -- 64,128,256,512,1024,2048,8192 Samples
|
||||
* buffer-sizes -- 64,128,256,512,1024,2048,8192 Samples
|
||||
|
||||
fragments -- 2
|
||||
* fragments -- 2
|
||||
|
||||
Hardware-pointer -- 2 Modi
|
||||
* Hardware-pointer -- 2 Modi
|
||||
|
||||
|
||||
The Card supports the readout of the actual Buffer-pointer,
|
||||
|
|
@ -74,20 +79,21 @@ Software Interface ALSA-DSP MADI Driver
|
|||
precise-pointer.
|
||||
|
||||
|
||||
.. hint::
|
||||
(Hint: Experimenting I found that the pointer is maximum 64 to
|
||||
large never to small. So if you subtract 64 you always have a
|
||||
safe pointer for writing, which is used on this mode inside
|
||||
ALSA. In theory now you can get now a latency as low as 16
|
||||
Samples, which is a quarter of the interrupt possibilities.)
|
||||
|
||||
Precise Pointer -- off
|
||||
* Precise Pointer -- off
|
||||
interrupt used for pointer-calculation
|
||||
|
||||
Precise Pointer -- on
|
||||
* Precise Pointer -- on
|
||||
hardware pointer used.
|
||||
|
||||
Controller:
|
||||
|
||||
Controller
|
||||
----------
|
||||
|
||||
Since DSP-MADI-Mixer has 8152 Fader, it does not make sense to
|
||||
use the standard mixer-controls, since this would break most of
|
||||
|
|
@ -103,24 +109,24 @@ Software Interface ALSA-DSP MADI Driver
|
|||
or peak-meters over ioctl, or also to do only copying and no
|
||||
conversion. A test-application shows the usage of the controller.
|
||||
|
||||
Latency Controls --- not implemented !!!
|
||||
|
||||
* Latency Controls --- not implemented !!!
|
||||
|
||||
.. note::
|
||||
Note: Within the windows-driver the latency is accessible of a
|
||||
control-panel, but buffer-sizes are controlled with ALSA from
|
||||
hwparams-calls and should not be changed in run-state, I did not
|
||||
implement it here.
|
||||
|
||||
|
||||
System Clock -- suspended !!!!
|
||||
* System Clock -- suspended !!!!
|
||||
|
||||
Name -- "System Clock Mode"
|
||||
* Name -- "System Clock Mode"
|
||||
|
||||
Access -- Read Write
|
||||
|
||||
Values -- "Master" "Slave"
|
||||
* Access -- Read Write
|
||||
|
||||
* Values -- "Master" "Slave"
|
||||
|
||||
.. note::
|
||||
!!!! This is a hardware-function but is in conflict with the
|
||||
Clock-source controller, which is a kind of ALSA-standard. I
|
||||
makes sense to set the card to a special mode (master at some
|
||||
|
|
@ -128,106 +134,107 @@ Software Interface ALSA-DSP MADI Driver
|
|||
a studio should have working synchronisations setup. So use
|
||||
Clock-source-controller instead !!!!
|
||||
|
||||
Clock Source
|
||||
* Clock Source
|
||||
|
||||
Name -- "Sample Clock Source"
|
||||
* Name -- "Sample Clock Source"
|
||||
|
||||
Access -- Read Write
|
||||
* Access -- Read Write
|
||||
|
||||
Values -- "AutoSync", "Internal 32.0 kHz", "Internal 44.1 kHz",
|
||||
* Values -- "AutoSync", "Internal 32.0 kHz", "Internal 44.1 kHz",
|
||||
"Internal 48.0 kHz", "Internal 64.0 kHz", "Internal 88.2 kHz",
|
||||
"Internal 96.0 kHz"
|
||||
|
||||
Choose between Master at a specific Frequency and so also the
|
||||
Speed-mode or Slave (Autosync). Also see "Preferred Sync Ref"
|
||||
|
||||
|
||||
.. warning::
|
||||
!!!! This is no pure hardware function but was implemented by
|
||||
ALSA by some ALSA-drivers before, so I use it also. !!!
|
||||
|
||||
|
||||
Preferred Sync Ref
|
||||
* Preferred Sync Ref
|
||||
|
||||
Name -- "Preferred Sync Reference"
|
||||
* Name -- "Preferred Sync Reference"
|
||||
|
||||
Access -- Read Write
|
||||
* Access -- Read Write
|
||||
|
||||
Values -- "Word" "MADI"
|
||||
* Values -- "Word" "MADI"
|
||||
|
||||
|
||||
Within the Auto-sync-Mode the preferred Sync Source can be
|
||||
chosen. If it is not available another is used if possible.
|
||||
|
||||
.. note::
|
||||
Note: Since MADI has a much higher bit-rate than word-clock, the
|
||||
card should synchronise better in MADI Mode. But since the
|
||||
RME-PLL is very good, there are almost no problems with
|
||||
word-clock too. I never found a difference.
|
||||
|
||||
|
||||
TX 64 channel ---
|
||||
* TX 64 channel
|
||||
|
||||
Name -- "TX 64 channels mode"
|
||||
* Name -- "TX 64 channels mode"
|
||||
|
||||
Access -- Read Write
|
||||
* Access -- Read Write
|
||||
|
||||
Values -- 0 1
|
||||
* Values -- 0 1
|
||||
|
||||
Using 64-channel-modus (1) or 56-channel-modus for
|
||||
MADI-transmission (0).
|
||||
|
||||
|
||||
.. note::
|
||||
Note: This control is for output only. Input-mode is detected
|
||||
automatically from hardware sending MADI.
|
||||
|
||||
|
||||
Clear TMS ---
|
||||
* Clear TMS
|
||||
|
||||
Name -- "Clear Track Marker"
|
||||
* Name -- "Clear Track Marker"
|
||||
|
||||
Access -- Read Write
|
||||
* Access -- Read Write
|
||||
|
||||
Values -- 0 1
|
||||
* Values -- 0 1
|
||||
|
||||
|
||||
Don't use to lower 5 Audio-bits on AES as additional Bits.
|
||||
|
||||
|
||||
Safe Mode oder Auto Input ---
|
||||
* Safe Mode oder Auto Input
|
||||
|
||||
Name -- "Safe Mode"
|
||||
* Name -- "Safe Mode"
|
||||
|
||||
Access -- Read Write
|
||||
* Access -- Read Write
|
||||
|
||||
Values -- 0 1
|
||||
|
||||
(default on)
|
||||
* Values -- 0 1 (default on)
|
||||
|
||||
If on (1), then if either the optical or coaxial connection
|
||||
has a failure, there is a takeover to the working one, with no
|
||||
sample failure. Its only useful if you use the second as a
|
||||
backup connection.
|
||||
|
||||
Input ---
|
||||
* Input
|
||||
|
||||
Name -- "Input Select"
|
||||
* Name -- "Input Select"
|
||||
|
||||
Access -- Read Write
|
||||
* Access -- Read Write
|
||||
|
||||
Values -- optical coaxial
|
||||
* Values -- optical coaxial
|
||||
|
||||
|
||||
Choosing the Input, optical or coaxial. If Safe-mode is active,
|
||||
this is the preferred Input.
|
||||
|
||||
-------------- Mixer ----------------------
|
||||
|
||||
Mixer
|
||||
-----
|
||||
|
||||
Name -- "Mixer"
|
||||
* Mixer
|
||||
|
||||
Access -- Read Write
|
||||
* Name -- "Mixer"
|
||||
|
||||
Values - <channel-number 0-127> <Value 0-65535>
|
||||
* Access -- Read Write
|
||||
|
||||
* Values - <channel-number 0-127> <Value 0-65535>
|
||||
|
||||
|
||||
Here as a first value the channel-index is taken to get/set the
|
||||
|
|
@ -235,40 +242,41 @@ Software Interface ALSA-DSP MADI Driver
|
|||
fader and 64-127 the playback to outputs fader. Value 0
|
||||
is channel muted 0 and 32768 an amplification of 1.
|
||||
|
||||
Chn 1-64
|
||||
* Chn 1-64
|
||||
|
||||
fast mixer for the ALSA-mixer utils. The diagonal of the
|
||||
mixer-matrix is implemented from playback to output.
|
||||
|
||||
|
||||
Line Out
|
||||
* Line Out
|
||||
|
||||
Name -- "Line Out"
|
||||
* Name -- "Line Out"
|
||||
|
||||
Access -- Read Write
|
||||
* Access -- Read Write
|
||||
|
||||
Values -- 0 1
|
||||
* Values -- 0 1
|
||||
|
||||
Switching on and off the analog out, which has nothing to do
|
||||
with mixing or routing. the analog outs reflects channel 63,64.
|
||||
|
||||
|
||||
--- information (only read access):
|
||||
Information (only read access)
|
||||
------------------------------
|
||||
|
||||
Sample Rate
|
||||
* Sample Rate
|
||||
|
||||
Name -- "System Sample Rate"
|
||||
* Name -- "System Sample Rate"
|
||||
|
||||
Access -- Read-only
|
||||
* Access -- Read-only
|
||||
|
||||
getting the sample rate.
|
||||
|
||||
|
||||
External Rate measured
|
||||
* External Rate measured
|
||||
|
||||
Name -- "External Rate"
|
||||
* Name -- "External Rate"
|
||||
|
||||
Access -- Read only
|
||||
* Access -- Read only
|
||||
|
||||
|
||||
Should be "Autosync Rate", but Name used is
|
||||
|
|
@ -276,79 +284,86 @@ Software Interface ALSA-DSP MADI Driver
|
|||
reported.
|
||||
|
||||
|
||||
MADI Sync Status
|
||||
* MADI Sync Status
|
||||
|
||||
Name -- "MADI Sync Lock Status"
|
||||
* Name -- "MADI Sync Lock Status"
|
||||
|
||||
Access -- Read
|
||||
* Access -- Read
|
||||
|
||||
Values -- 0,1,2
|
||||
* Values -- 0,1,2
|
||||
|
||||
MADI-Input is 0=Unlocked, 1=Locked, or 2=Synced.
|
||||
|
||||
|
||||
Word Clock Sync Status
|
||||
* Word Clock Sync Status
|
||||
|
||||
Name -- "Word Clock Lock Status"
|
||||
* Name -- "Word Clock Lock Status"
|
||||
|
||||
Access -- Read
|
||||
* Access -- Read
|
||||
|
||||
Values -- 0,1,2
|
||||
* Values -- 0,1,2
|
||||
|
||||
Word Clock Input is 0=Unlocked, 1=Locked, or 2=Synced.
|
||||
|
||||
AutoSync
|
||||
* AutoSync
|
||||
|
||||
Name -- "AutoSync Reference"
|
||||
* Name -- "AutoSync Reference"
|
||||
|
||||
Access -- Read
|
||||
* Access -- Read
|
||||
|
||||
Values -- "WordClock", "MADI", "None"
|
||||
* Values -- "WordClock", "MADI", "None"
|
||||
|
||||
Sync-Reference is either "WordClock", "MADI" or none.
|
||||
|
||||
RX 64ch --- noch nicht implementiert
|
||||
* RX 64ch --- noch nicht implementiert
|
||||
|
||||
MADI-Receiver is in 64 channel mode oder 56 channel mode.
|
||||
|
||||
|
||||
AB_inp --- not tested
|
||||
* AB_inp --- not tested
|
||||
|
||||
Used input for Auto-Input.
|
||||
|
||||
|
||||
actual Buffer Position --- not implemented
|
||||
* actual Buffer Position --- not implemented
|
||||
|
||||
!!! this is a ALSA internal function, so no control is used !!!
|
||||
|
||||
|
||||
|
||||
Calling Parameter:
|
||||
Calling Parameter
|
||||
=================
|
||||
|
||||
index int array (min = 1, max = 8),
|
||||
"Index value for RME HDSPM interface." card-index within ALSA
|
||||
* index int array (min = 1, max = 8)
|
||||
|
||||
Index value for RME HDSPM interface. card-index within ALSA
|
||||
|
||||
note: ALSA-standard
|
||||
|
||||
id string array (min = 1, max = 8),
|
||||
"ID string for RME HDSPM interface."
|
||||
* id string array (min = 1, max = 8)
|
||||
|
||||
ID string for RME HDSPM interface.
|
||||
|
||||
note: ALSA-standard
|
||||
|
||||
enable int array (min = 1, max = 8),
|
||||
"Enable/disable specific HDSPM sound-cards."
|
||||
* enable int array (min = 1, max = 8)
|
||||
|
||||
Enable/disable specific HDSPM sound-cards.
|
||||
|
||||
note: ALSA-standard
|
||||
|
||||
precise_ptr int array (min = 1, max = 8),
|
||||
"Enable precise pointer, or disable."
|
||||
* precise_ptr int array (min = 1, max = 8)
|
||||
|
||||
Enable precise pointer, or disable.
|
||||
|
||||
.. note::
|
||||
note: Use only when the application supports this (which is a special case).
|
||||
|
||||
line_outs_monitor int array (min = 1, max = 8),
|
||||
"Send playback streams to analog outs by default."
|
||||
* line_outs_monitor int array (min = 1, max = 8)
|
||||
|
||||
Send playback streams to analog outs by default.
|
||||
|
||||
.. note::
|
||||
note: each playback channel is mixed to the same numbered output
|
||||
channel (routed). This is against the ALSA-convention, where all
|
||||
channels have to be muted on after loading the driver, but was
|
||||
|
|
@ -356,7 +371,9 @@ Calling Parameter:
|
|||
|
||||
|
||||
|
||||
enable_monitor int array (min = 1, max = 8),
|
||||
"Enable Analog Out on Channel 63/64 by default."
|
||||
* enable_monitor int array (min = 1, max = 8)
|
||||
|
||||
Enable Analog Out on Channel 63/64 by default.
|
||||
|
||||
.. note ::
|
||||
note: here the analog output is enabled (but not routed).
|
||||
|
|
@ -14,3 +14,4 @@ Card-Specific Information
|
|||
mixart
|
||||
bt87x
|
||||
maya44
|
||||
hdspm
|
||||
|
|
|
|||
Loading…
Reference in New Issue