Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "Two new touchpad drivers - Cypress APA I2C Trackpad and Cypress PS/2
  touchpad and a big update to ALPS driver from Kevin Cernekee that adds
  support for "Rushmore" touchpads and paves way for adding support for
  "Dolphin" touchpads.

  There is also a new input driver for Goldfish emulator and also
  Android keyreset driver was folded into SysRq code.

  A few more drivers were updated with device tree bindings and others
  got some small cleanups and fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits)
  Input: cyttsp-spi - remove duplicate MODULE_ALIAS()
  Input: tsc2005 - add MODULE_ALIAS
  Input: tegra-kbc - require CONFIG_OF, remove platform data
  Input: synaptics - initialize pointer emulation usage
  Input: MT - do not apply filtering on emulated events
  Input: bma150 - make some defines public and fix some comments
  Input: bma150 - fix checking pm_runtime_get_sync() return value
  Input: ALPS - enable trackstick on Rushmore touchpads
  Input: ALPS - add support for "Rushmore" touchpads
  Input: ALPS - make the V3 packet field decoder "pluggable"
  Input: ALPS - move pixel and bitmap info into alps_data struct
  Input: ALPS - fix command mode check
  Input: ALPS - rework detection of Pinnacle AGx touchpads
  Input: ALPS - move {addr,nibble}_command settings into alps_set_defaults()
  Input: ALPS - use function pointers for different protocol handlers
  Input: ALPS - rework detection sequence
  Input: ALPS - introduce helper function for repeated commands
  Input: ALPS - move alps_get_model() down below hw_init code
  Input: ALPS - copy "model" info into alps_data struct
  Input: ALPS - document the alps.h data structures
  ...

Documentation/devicetree/bindings/input/imx-keypad.txt

@@ -0,0 +1,53 @@
+* Freescale i.MX Keypad Port(KPP) device tree bindings
+
+The KPP is designed to interface with a keypad matrix with 2-point contact
+or 3-point contact keys. The KPP is designed to simplify the software task
+of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
+and decoding one or multiple keys pressed simultaneously on a keypad.
+
+Required SoC Specific Properties:
+- compatible: Should be "fsl,<soc>-kpp".
+
+- reg: Physical base address of the KPP and length of memory mapped
+  region.
+
+- interrupts: The KPP interrupt number to the CPU(s).
+
+- clocks: The clock provided by the SoC to the KPP. Some SoCs use dummy
+clock(The clock for the KPP is provided by the SoCs automatically).
+
+Required Board Specific Properties:
+- pinctrl-names: The definition can be found at
+pinctrl/pinctrl-bindings.txt.
+
+- pinctrl-0: The definition can be found at
+pinctrl/pinctrl-bindings.txt.
+
+- linux,keymap: The definition can be found at
+bindings/input/matrix-keymap.txt.
+
+Example:
+kpp: kpp@73f94000 {
+	compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
+	reg = <0x73f94000 0x4000>;
+	interrupts = <60>;
+	clocks = <&clks 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_1>;
+	linux,keymap = <0x00000067	/* KEY_UP */
+			0x0001006c	/* KEY_DOWN */
+			0x00020072	/* KEY_VOLUMEDOWN */
+			0x00030066	/* KEY_HOME */
+			0x0100006a	/* KEY_RIGHT */
+			0x01010069	/* KEY_LEFT */
+			0x0102001c	/* KEY_ENTER */
+			0x01030073	/* KEY_VOLUMEUP */
+			0x02000040	/* KEY_F6 */
+			0x02010042	/* KEY_F8 */
+			0x02020043	/* KEY_F9 */
+			0x02030044	/* KEY_F10 */
+			0x0300003b	/* KEY_F1 */
+			0x0301003c	/* KEY_F2 */
+			0x0302003d	/* KEY_F3 */
+			0x03030074>;	/* KEY_POWER */
+};

Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt

@@ -1,7 +1,18 @@
 * Tegra keyboard controller
+The key controller has maximum 24 pins to make matrix keypad. Any pin
+can be configured as row or column. The maximum column pin can be 8
+and maximum row pins can be 16 for Tegra20/Tegra30.
 
 Required properties:
 - compatible: "nvidia,tegra20-kbc"
+- reg: Register base address of KBC.
+- interrupts: Interrupt number for the KBC.
+- nvidia,kbc-row-pins: The KBC pins which are configured as row. This is an
+  array of pin numbers which is used as rows.
+- nvidia,kbc-col-pins: The KBC pins which are configured as column. This is an
+  array of pin numbers which is used as column.
+- linux,keymap: The keymap for keys as described in the binding document
+  devicetree/bindings/input/matrix-keymap.txt.
 
 Optional properties, in addition to those specified by the shared
 matrix-keyboard bindings:
@@ -19,5 +30,16 @@ Example:
 keyboard: keyboard {
 	compatible = "nvidia,tegra20-kbc";
 	reg = <0x7000e200 0x100>;
+	interrupts = <0 85 0x04>;
 	nvidia,ghost-filter;
+	nvidia,debounce-delay-ms = <640>;
+	nvidia,kbc-row-pins = <0 1 2>;    /* pin 0, 1, 2 as rows */
+	nvidia,kbc-col-pins = <11 12 13>; /* pin 11, 12, 13 as columns */
+	linux,keymap = <0x00000074
+			0x00010067
+			0x00020066
+			0x01010068
+			0x02000069
+			0x02010070
+			0x02020071>;
 };

drivers/input/Kconfig

@@ -3,7 +3,7 @@
 #
 
 menu "Input device support"
-	depends on !S390 && !UML
+	depends on !UML
 
 config INPUT
 	tristate "Generic input layer (needed for keyboard, mouse, ...)" if EXPERT

drivers/input/input-mt.c

@@ -18,6 +18,7 @@ static void copy_abs(struct input_dev *dev, unsigned int dst, unsigned int src)
 {
 	if (dev->absinfo && test_bit(src, dev->absbit)) {
 		dev->absinfo[dst] = dev->absinfo[src];
+		dev->absinfo[dst].fuzz = 0;
 		dev->absbit[BIT_WORD(dst)] |= BIT_MASK(dst);
 	}
 }

drivers/input/joystick/walkera0701.c

@@ -12,7 +12,7 @@
  * the Free Software Foundation.
 */
 
-/* #define WK0701_DEBUG */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #define RESERVE 20000
 #define SYNC_PULSE 1306000
@@ -67,6 +67,7 @@ static inline void walkera0701_parse_frame(struct walkera_dev *w)
 {
 	int i;
 	int val1, val2, val3, val4, val5, val6, val7, val8;
+	int magic, magic_bit;
 	int crc1, crc2;
 
 	for (crc1 = crc2 = i = 0; i < 10; i++) {
@@ -102,17 +103,12 @@ static inline void walkera0701_parse_frame(struct walkera_dev *w)
 	val8 = (w->buf[18] & 1) << 8 | (w->buf[19] << 4) | w->buf[20];
 	val8 *= (w->buf[18] & 2) - 1;	/*sign */
 
-#ifdef WK0701_DEBUG
+	magic = (w->buf[21] << 4) | w->buf[22];
-	{
+	magic_bit = (w->buf[24] & 8) >> 3;
-		int magic, magic_bit;
+	pr_debug("%4d %4d %4d %4d  %4d %4d %4d %4d (magic %2x %d)\n",
-		magic = (w->buf[21] << 4) | w->buf[22];
+		 val1, val2, val3, val4, val5, val6, val7, val8,
-		magic_bit = (w->buf[24] & 8) >> 3;
+		 magic, magic_bit);
-		printk(KERN_DEBUG
+
-		       "walkera0701: %4d %4d %4d %4d  %4d %4d %4d %4d (magic %2x %d)\n",
-		       val1, val2, val3, val4, val5, val6, val7, val8, magic,
-		       magic_bit);
-	}
-#endif
 	input_report_abs(w->input_dev, ABS_X, val2);
 	input_report_abs(w->input_dev, ABS_Y, val1);
 	input_report_abs(w->input_dev, ABS_Z, val6);
@@ -187,6 +183,9 @@ static int walkera0701_open(struct input_dev *dev)
 {
 	struct walkera_dev *w = input_get_drvdata(dev);
 
+	if (parport_claim(w->pardevice))
+		return -EBUSY;
+
 	parport_enable_irq(w->parport);
 	return 0;
 }
@@ -197,40 +196,51 @@ static void walkera0701_close(struct input_dev *dev)
 
 	parport_disable_irq(w->parport);
 	hrtimer_cancel(&w->timer);
+
+	parport_release(w->pardevice);
 }
 
 static int walkera0701_connect(struct walkera_dev *w, int parport)
 {
-	int err = -ENODEV;
+	int error;
 
 	w->parport = parport_find_number(parport);
-	if (w->parport == NULL)
+	if (!w->parport) {
+		pr_err("parport %d does not exist\n", parport);
 		return -ENODEV;
-
-	if (w->parport->irq == -1) {
-		printk(KERN_ERR "walkera0701: parport without interrupt\n");
-		goto init_err;
 	}
 
-	err = -EBUSY;
+	if (w->parport->irq == -1) {
+		pr_err("parport %d does not have interrupt assigned\n",
+			parport);
+		error = -EINVAL;
+		goto err_put_parport;
+	}
+
 	w->pardevice = parport_register_device(w->parport, "walkera0701",
 				    NULL, NULL, walkera0701_irq_handler,
 				    PARPORT_DEV_EXCL, w);
-	if (!w->pardevice)
+	if (!w->pardevice) {
-		goto init_err;
+		pr_err("failed to register parport device\n");
+		error = -EIO;
+		goto err_put_parport;
+	}
 
-	if (parport_negotiate(w->pardevice->port, IEEE1284_MODE_COMPAT))
+	if (parport_negotiate(w->pardevice->port, IEEE1284_MODE_COMPAT)) {
-		goto init_err1;
+		pr_err("failed to negotiate parport mode\n");
-
+		error = -EIO;
-	if (parport_claim(w->pardevice))
+		goto err_unregister_device;
-		goto init_err1;
+	}
 
 	hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	w->timer.function = timer_handler;
 
 	w->input_dev = input_allocate_device();
-	if (!w->input_dev)
+	if (!w->input_dev) {
-		goto init_err2;
+		pr_err("failed to allocate input device\n");
+		error = -ENOMEM;
+		goto err_unregister_device;
+	}
 
 	input_set_drvdata(w->input_dev, w);
 	w->input_dev->name = "Walkera WK-0701 TX";
@@ -241,6 +251,7 @@ static int walkera0701_connect(struct walkera_dev *w, int parport)
 	w->input_dev->id.vendor = 0x0001;
 	w->input_dev->id.product = 0x0001;
 	w->input_dev->id.version = 0x0100;
+	w->input_dev->dev.parent = w->parport->dev;
 	w->input_dev->open = walkera0701_open;
 	w->input_dev->close = walkera0701_close;
 
@@ -254,27 +265,26 @@ static int walkera0701_connect(struct walkera_dev *w, int parport)
 	input_set_abs_params(w->input_dev, ABS_RUDDER, -512, 512, 0, 0);
 	input_set_abs_params(w->input_dev, ABS_MISC, -512, 512, 0, 0);
 
-	err = input_register_device(w->input_dev);
+	error = input_register_device(w->input_dev);
-	if (err)
+	if (error) {
-		goto init_err3;
+		pr_err("failed to register input device\n");
+		goto err_free_input_dev;
+	}
 
 	return 0;
 
- init_err3:
+err_free_input_dev:
 	input_free_device(w->input_dev);
- init_err2:
+err_unregister_device:
-	parport_release(w->pardevice);
- init_err1:
 	parport_unregister_device(w->pardevice);
- init_err:
+err_put_parport:
 	parport_put_port(w->parport);
-	return err;
+	return error;
 }
 
 static void walkera0701_disconnect(struct walkera_dev *w)
 {
 	input_unregister_device(w->input_dev);
-	parport_release(w->pardevice);
 	parport_unregister_device(w->pardevice);
 	parport_put_port(w->parport);
 }

drivers/input/keyboard/Kconfig

@@ -224,7 +224,7 @@ config KEYBOARD_TCA6416
 
 config KEYBOARD_TCA8418
 	tristate "TCA8418 Keypad Support"
-	depends on I2C
+	depends on I2C && GENERIC_HARDIRQS
 	select INPUT_MATRIXKMAP
 	help
 	  This driver implements basic keypad functionality
@@ -303,7 +303,7 @@ config KEYBOARD_HP7XX
 
 config KEYBOARD_LM8323
 	tristate "LM8323 keypad chip"
-	depends on I2C
+	depends on I2C && GENERIC_HARDIRQS
 	depends on LEDS_CLASS
 	help
 	  If you say yes here you get support for the National Semiconductor
@@ -420,7 +420,7 @@ config KEYBOARD_NOMADIK
 
 config KEYBOARD_TEGRA
 	tristate "NVIDIA Tegra internal matrix keyboard controller support"
-	depends on ARCH_TEGRA
+	depends on ARCH_TEGRA && OF
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use a matrix keyboard connected directly
@@ -479,6 +479,16 @@ config KEYBOARD_SAMSUNG
 	  To compile this driver as a module, choose M here: the
 	  module will be called samsung-keypad.
 
+config KEYBOARD_GOLDFISH_EVENTS
+	depends on GOLDFISH
+	tristate "Generic Input Event device for Goldfish"
+	help
+	  Say Y here to get an input event device for the Goldfish virtual
+	  device emulator.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called goldfish-events.
+
 config KEYBOARD_STOWAWAY
 	tristate "Stowaway keyboard"
 	select SERIO

drivers/input/keyboard/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
 obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS)	+= goldfish_events.o
 obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
 obj-$(CONFIG_KEYBOARD_GPIO_POLLED)	+= gpio_keys_polled.o
 obj-$(CONFIG_KEYBOARD_TCA6416)		+= tca6416-keypad.o

drivers/input/keyboard/atkbd.c

@@ -676,6 +676,39 @@ static inline void atkbd_disable(struct atkbd *atkbd)
 	serio_continue_rx(atkbd->ps2dev.serio);
 }
 
+static int atkbd_activate(struct atkbd *atkbd)
+{
+	struct ps2dev *ps2dev = &atkbd->ps2dev;
+
+/*
+ * Enable the keyboard to receive keystrokes.
+ */
+
+	if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
+		dev_err(&ps2dev->serio->dev,
+			"Failed to enable keyboard on %s\n",
+			ps2dev->serio->phys);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * atkbd_deactivate() resets and disables the keyboard from sending
+ * keystrokes.
+ */
+
+static void atkbd_deactivate(struct atkbd *atkbd)
+{
+	struct ps2dev *ps2dev = &atkbd->ps2dev;
+
+	if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS))
+		dev_err(&ps2dev->serio->dev,
+			"Failed to deactivate keyboard on %s\n",
+			ps2dev->serio->phys);
+}
+
 /*
  * atkbd_probe() probes for an AT keyboard on a serio port.
  */
@@ -726,11 +759,17 @@ static int atkbd_probe(struct atkbd *atkbd)
 
 	if (atkbd->id == 0xaca1 && atkbd->translated) {
 		dev_err(&ps2dev->serio->dev,
-			"NCD terminal keyboards are only supported on non-translating controlelrs. "
+			"NCD terminal keyboards are only supported on non-translating controllers. "
 			"Use i8042.direct=1 to disable translation.\n");
 		return -1;
 	}
 
+/*
+ * Make sure nothing is coming from the keyboard and disturbs our
+ * internal state.
+ */
+	atkbd_deactivate(atkbd);
+
 	return 0;
 }
 
@@ -825,24 +864,6 @@ static int atkbd_reset_state(struct atkbd *atkbd)
 	return 0;
 }
 
-static int atkbd_activate(struct atkbd *atkbd)
-{
-	struct ps2dev *ps2dev = &atkbd->ps2dev;
-
-/*
- * Enable the keyboard to receive keystrokes.
- */
-
-	if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
-		dev_err(&ps2dev->serio->dev,
-			"Failed to enable keyboard on %s\n",
-			ps2dev->serio->phys);
-		return -1;
-	}
-
-	return 0;
-}
-
 /*
  * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a
  * reboot.
@@ -1150,7 +1171,6 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
 
 		atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
 		atkbd_reset_state(atkbd);
-		atkbd_activate(atkbd);
 
 	} else {
 		atkbd->set = 2;
@@ -1165,6 +1185,8 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
 		goto fail3;
 
 	atkbd_enable(atkbd);
+	if (serio->write)
+		atkbd_activate(atkbd);
 
 	err = input_register_device(atkbd->dev);
 	if (err)
@@ -1208,8 +1230,6 @@ static int atkbd_reconnect(struct serio *serio)
 		if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
 			goto out;
 
-		atkbd_activate(atkbd);
-
 		/*
 		 * Restore LED state and repeat rate. While input core
 		 * will do this for us at resume time reconnect may happen
@@ -1223,7 +1243,17 @@ static int atkbd_reconnect(struct serio *serio)
 
 	}
 
+	/*
+	 * Reset our state machine in case reconnect happened in the middle
+	 * of multi-byte scancode.
+	 */
+	atkbd->xl_bit = 0;
+	atkbd->emul = 0;
+
 	atkbd_enable(atkbd);
+	if (atkbd->write)
+		atkbd_activate(atkbd);
+
 	retval = 0;
 
  out:

drivers/input/keyboard/goldfish_events.c

@@ -0,0 +1,194 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (C) 2012 Intel, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+enum {
+	REG_READ        = 0x00,
+	REG_SET_PAGE    = 0x00,
+	REG_LEN         = 0x04,
+	REG_DATA        = 0x08,
+
+	PAGE_NAME       = 0x00000,
+	PAGE_EVBITS     = 0x10000,
+	PAGE_ABSDATA    = 0x20000 | EV_ABS,
+};
+
+struct event_dev {
+	struct input_dev *input;
+	int irq;
+	void __iomem *addr;
+	char name[0];
+};
+
+static irqreturn_t events_interrupt(int irq, void *dev_id)
+{
+	struct event_dev *edev = dev_id;
+	unsigned type, code, value;
+
+	type = __raw_readl(edev->addr + REG_READ);
+	code = __raw_readl(edev->addr + REG_READ);
+	value = __raw_readl(edev->addr + REG_READ);
+
+	input_event(edev->input, type, code, value);
+	input_sync(edev->input);
+	return IRQ_HANDLED;
+}
+
+static void events_import_bits(struct event_dev *edev,
+			unsigned long bits[], unsigned type, size_t count)
+{
+	void __iomem *addr = edev->addr;
+	int i, j;
+	size_t size;
+	uint8_t val;
+
+	__raw_writel(PAGE_EVBITS | type, addr + REG_SET_PAGE);
+
+	size = __raw_readl(addr + REG_LEN) * 8;
+	if (size < count)
+		count = size;
+
+	addr += REG_DATA;
+	for (i = 0; i < count; i += 8) {
+		val = __raw_readb(addr++);
+		for (j = 0; j < 8; j++)
+			if (val & 1 << j)
+				set_bit(i + j, bits);
+	}
+}
+
+static void events_import_abs_params(struct event_dev *edev)
+{
+	struct input_dev *input_dev = edev->input;
+	void __iomem *addr = edev->addr;
+	u32 val[4];
+	int count;
+	int i, j;
+
+	__raw_writel(PAGE_ABSDATA, addr + REG_SET_PAGE);
+
+	count = __raw_readl(addr + REG_LEN) / sizeof(val);
+	if (count > ABS_MAX)
+		count = ABS_MAX;
+
+	for (i = 0; i < count; i++) {
+		if (!test_bit(i, input_dev->absbit))
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(val); j++) {
+			int offset = (i * ARRAY_SIZE(val) + j) * sizeof(u32);
+			val[j] = __raw_readl(edev->addr + REG_DATA + offset);
+		}
+
+		input_set_abs_params(input_dev, i,
+				     val[0], val[1], val[2], val[3]);
+	}
+}
+
+static int events_probe(struct platform_device *pdev)
+{
+	struct input_dev *input_dev;
+	struct event_dev *edev;
+	struct resource *res;
+	unsigned keymapnamelen;
+	void __iomem *addr;
+	int irq;
+	int i;
+	int error;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	addr = devm_ioremap(&pdev->dev, res->start, 4096);
+	if (!addr)
+		return -ENOMEM;
+
+	__raw_writel(PAGE_NAME, addr + REG_SET_PAGE);
+	keymapnamelen = __raw_readl(addr + REG_LEN);
+
+	edev = devm_kzalloc(&pdev->dev,
+			    sizeof(struct event_dev) + keymapnamelen + 1,
+			    GFP_KERNEL);
+	if (!edev)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return -ENOMEM;
+
+	edev->input = input_dev;
+	edev->addr = addr;
+	edev->irq = irq;
+
+	for (i = 0; i < keymapnamelen; i++)
+		edev->name[i] = __raw_readb(edev->addr + REG_DATA + i);
+
+	pr_debug("events_probe() keymap=%s\n", edev->name);
+
+	input_dev->name = edev->name;
+	input_dev->id.bustype = BUS_HOST;
+
+	events_import_bits(edev, input_dev->evbit, EV_SYN, EV_MAX);
+	events_import_bits(edev, input_dev->keybit, EV_KEY, KEY_MAX);
+	events_import_bits(edev, input_dev->relbit, EV_REL, REL_MAX);
+	events_import_bits(edev, input_dev->absbit, EV_ABS, ABS_MAX);
+	events_import_bits(edev, input_dev->mscbit, EV_MSC, MSC_MAX);
+	events_import_bits(edev, input_dev->ledbit, EV_LED, LED_MAX);
+	events_import_bits(edev, input_dev->sndbit, EV_SND, SND_MAX);
+	events_import_bits(edev, input_dev->ffbit, EV_FF, FF_MAX);
+	events_import_bits(edev, input_dev->swbit, EV_SW, SW_MAX);
+
+	events_import_abs_params(edev);
+
+	error = devm_request_irq(&pdev->dev, edev->irq, events_interrupt, 0,
+				 "goldfish-events-keypad", edev);
+	if (error)
+		return error;
+
+	error = input_register_device(input_dev);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static struct platform_driver events_driver = {
+	.probe	= events_probe,
+	.driver	= {
+		.owner	= THIS_MODULE,
+		.name	= "goldfish_events",
+	},
+};
+
+module_platform_driver(events_driver);
+
+MODULE_AUTHOR("Brian Swetland");
+MODULE_DESCRIPTION("Goldfish Event Device");
+MODULE_LICENSE("GPL");

drivers/input/keyboard/imx_keypad.c

@@ -20,6 +20,7 @@
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/timer.h>
@@ -414,15 +415,23 @@ open_err:
 	return -EIO;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id imx_keypad_of_match[] = {
+	{ .compatible = "fsl,imx21-kpp", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_keypad_of_match);
+#endif
+
 static int imx_keypad_probe(struct platform_device *pdev)
 {
 	const struct matrix_keymap_data *keymap_data = pdev->dev.platform_data;
 	struct imx_keypad *keypad;
 	struct input_dev *input_dev;
 	struct resource *res;
-	int irq, error, i;
+	int irq, error, i, row, col;
 
-	if (keymap_data == NULL) {
+	if (!keymap_data && !pdev->dev.of_node) {
 		dev_err(&pdev->dev, "no keymap defined\n");
 		return -EINVAL;
 	}
@@ -480,22 +489,6 @@ static int imx_keypad_probe(struct platform_device *pdev)
 		goto failed_unmap;
 	}
 
-	/* Search for rows and cols enabled */
-	for (i = 0; i < keymap_data->keymap_size; i++) {
-		keypad->rows_en_mask |= 1 << KEY_ROW(keymap_data->keymap[i]);
-		keypad->cols_en_mask |= 1 << KEY_COL(keymap_data->keymap[i]);
-	}
-
-	if (keypad->rows_en_mask > ((1 << MAX_MATRIX_KEY_ROWS) - 1) ||
-	    keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) {
-		dev_err(&pdev->dev,
-			"invalid key data (too many rows or colums)\n");
-		error = -EINVAL;
-		goto failed_clock_put;
-	}
-	dev_dbg(&pdev->dev, "enabled rows mask: %x\n", keypad->rows_en_mask);
-	dev_dbg(&pdev->dev, "enabled cols mask: %x\n", keypad->cols_en_mask);
-
 	/* Init the Input device */
 	input_dev->name = pdev->name;
 	input_dev->id.bustype = BUS_HOST;
@@ -512,6 +505,19 @@ static int imx_keypad_probe(struct platform_device *pdev)
 		goto failed_clock_put;
 	}
 
+	/* Search for rows and cols enabled */
+	for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
+		for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
+			i = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
+			if (keypad->keycodes[i] != KEY_RESERVED) {
+				keypad->rows_en_mask |= 1 << row;
+				keypad->cols_en_mask |= 1 << col;
+			}
+		}
+	}
+	dev_dbg(&pdev->dev, "enabled rows mask: %x\n", keypad->rows_en_mask);
+	dev_dbg(&pdev->dev, "enabled cols mask: %x\n", keypad->cols_en_mask);
+
 	__set_bit(EV_REP, input_dev->evbit);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 	input_set_drvdata(input_dev, keypad);
@@ -631,6 +637,7 @@ static struct platform_driver imx_keypad_driver = {
 		.name	= "imx-keypad",
 		.owner	= THIS_MODULE,
 		.pm	= &imx_kbd_pm_ops,
+		.of_match_table = of_match_ptr(imx_keypad_of_match),
 	},
 	.probe		= imx_keypad_probe,
 	.remove		= imx_keypad_remove,

drivers/input/keyboard/qt2160.c

@@ -20,6 +20,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
@@ -39,6 +40,11 @@
 #define QT2160_CMD_GPIOS      6
 #define QT2160_CMD_SUBVER     7
 #define QT2160_CMD_CALIBRATE  10
+#define QT2160_CMD_DRIVE_X    70
+#define QT2160_CMD_PWMEN_X    74
+#define QT2160_CMD_PWM_DUTY   76
+
+#define QT2160_NUM_LEDS_X	8
 
 #define QT2160_CYCLE_INTERVAL	(2*HZ)
 
@@ -49,6 +55,17 @@ static unsigned char qt2160_key2code[] = {
 	KEY_C, KEY_D, KEY_E, KEY_F,
 };
 
+#ifdef CONFIG_LEDS_CLASS
+struct qt2160_led {
+	struct qt2160_data *qt2160;
+	struct led_classdev cdev;
+	struct work_struct work;
+	char name[32];
+	int id;
+	enum led_brightness new_brightness;
+};
+#endif
+
 struct qt2160_data {
 	struct i2c_client *client;
 	struct input_dev *input;
@@ -56,8 +73,61 @@ struct qt2160_data {
 	spinlock_t lock;        /* Protects canceling/rescheduling of dwork */
 	unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)];
 	u16 key_matrix;
+#ifdef CONFIG_LEDS_CLASS
+	struct qt2160_led leds[QT2160_NUM_LEDS_X];
+	struct mutex led_lock;
+#endif
 };
 
+static int qt2160_read(struct i2c_client *client, u8 reg);
+static int qt2160_write(struct i2c_client *client, u8 reg, u8 data);
+
+#ifdef CONFIG_LEDS_CLASS
+
+static void qt2160_led_work(struct work_struct *work)
+{
+	struct qt2160_led *led = container_of(work, struct qt2160_led, work);
+	struct qt2160_data *qt2160 = led->qt2160;
+	struct i2c_client *client = qt2160->client;
+	int value = led->new_brightness;
+	u32 drive, pwmen;
+
+	mutex_lock(&qt2160->led_lock);
+
+	drive = qt2160_read(client, QT2160_CMD_DRIVE_X);
+	pwmen = qt2160_read(client, QT2160_CMD_PWMEN_X);
+	if (value != LED_OFF) {
+		drive |= (1 << led->id);
+		pwmen |= (1 << led->id);
+
+	} else {
+		drive &= ~(1 << led->id);
+		pwmen &= ~(1 << led->id);
+	}
+	qt2160_write(client, QT2160_CMD_DRIVE_X, drive);
+	qt2160_write(client, QT2160_CMD_PWMEN_X, pwmen);
+
+	/*
+	 * Changing this register will change the brightness
+	 * of every LED in the qt2160. It's a HW limitation.
+	 */
+	if (value != LED_OFF)
+		qt2160_write(client, QT2160_CMD_PWM_DUTY, value);
+
+	mutex_unlock(&qt2160->led_lock);
+}
+
+static void qt2160_led_set(struct led_classdev *cdev,
+			   enum led_brightness value)
+{
+	struct qt2160_led *led = container_of(cdev, struct qt2160_led, cdev);
+
+	led->new_brightness = value;
+	schedule_work(&led->work);
+}
+
+#endif /* CONFIG_LEDS_CLASS */
+
 static int qt2160_read_block(struct i2c_client *client,
 			     u8 inireg, u8 *buffer, unsigned int count)
 {
@@ -216,6 +286,63 @@ static int qt2160_write(struct i2c_client *client, u8 reg, u8 data)
 	return ret;
 }
 
+#ifdef CONFIG_LEDS_CLASS
+
+static int qt2160_register_leds(struct qt2160_data *qt2160)
+{
+	struct i2c_client *client = qt2160->client;
+	int ret;
+	int i;
+
+	mutex_init(&qt2160->led_lock);
+
+	for (i = 0; i < QT2160_NUM_LEDS_X; i++) {
+		struct qt2160_led *led = &qt2160->leds[i];
+
+		snprintf(led->name, sizeof(led->name), "qt2160:x%d", i);
+		led->cdev.name = led->name;
+		led->cdev.brightness_set = qt2160_led_set;
+		led->cdev.brightness = LED_OFF;
+		led->id = i;
+		led->qt2160 = qt2160;
+
+		INIT_WORK(&led->work, qt2160_led_work);
+
+		ret = led_classdev_register(&client->dev, &led->cdev);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Tur off LEDs */
+	qt2160_write(client, QT2160_CMD_DRIVE_X, 0);
+	qt2160_write(client, QT2160_CMD_PWMEN_X, 0);
+	qt2160_write(client, QT2160_CMD_PWM_DUTY, 0);
+
+	return 0;
+}
+
+static void qt2160_unregister_leds(struct qt2160_data *qt2160)
+{
+	int i;
+
+	for (i = 0; i < QT2160_NUM_LEDS_X; i++) {
+		led_classdev_unregister(&qt2160->leds[i].cdev);
+		cancel_work_sync(&qt2160->leds[i].work);
+	}
+}
+
+#else
+
+static inline int qt2160_register_leds(struct qt2160_data *qt2160)
+{
+	return 0;
+}
+
+static inline void qt2160_unregister_leds(struct qt2160_data *qt2160)
+{
+}
+
+#endif
 
 static bool qt2160_identify(struct i2c_client *client)
 {
@@ -249,7 +376,7 @@ static bool qt2160_identify(struct i2c_client *client)
 }
 
 static int qt2160_probe(struct i2c_client *client,
-				  const struct i2c_device_id *id)
+			const struct i2c_device_id *id)
 {
 	struct qt2160_data *qt2160;
 	struct input_dev *input;
@@ -314,11 +441,17 @@ static int qt2160_probe(struct i2c_client *client,
 		}
 	}
 
+	error = qt2160_register_leds(qt2160);
+	if (error) {
+		dev_err(&client->dev, "Failed to register leds\n");
+		goto err_free_irq;
+	}
+
 	error = input_register_device(qt2160->input);
 	if (error) {
 		dev_err(&client->dev,
 			"Failed to register input device\n");
-		goto err_free_irq;
+		goto err_unregister_leds;
 	}
 
 	i2c_set_clientdata(client, qt2160);
@@ -326,6 +459,8 @@ static int qt2160_probe(struct i2c_client *client,
 
 	return 0;
 
+err_unregister_leds:
+	qt2160_unregister_leds(qt2160);
 err_free_irq:
 	if (client->irq)
 		free_irq(client->irq, qt2160);
@@ -339,6 +474,8 @@ static int qt2160_remove(struct i2c_client *client)
 {
 	struct qt2160_data *qt2160 = i2c_get_clientdata(client);
 
+	qt2160_unregister_leds(qt2160);
+
 	/* Release IRQ so no queue will be scheduled */
 	if (client->irq)
 		free_irq(client->irq, qt2160);

drivers/input/keyboard/tegra-kbc.c

@@ -29,9 +29,16 @@
 #include <linux/of.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
-#include <linux/input/tegra_kbc.h>
+#include <linux/input/matrix_keypad.h>
 #include <mach/clk.h>
 
+#define KBC_MAX_GPIO	24
+#define KBC_MAX_KPENT	8
+
+#define KBC_MAX_ROW	16
+#define KBC_MAX_COL	8
+#define KBC_MAX_KEY	(KBC_MAX_ROW * KBC_MAX_COL)
+
 #define KBC_MAX_DEBOUNCE_CNT	0x3ffu
 
 /* KBC row scan time and delay for beginning the row scan. */
@@ -67,10 +74,27 @@
 
 #define KBC_ROW_SHIFT	3
 
+enum tegra_pin_type {
+	PIN_CFG_IGNORE,
+	PIN_CFG_COL,
+	PIN_CFG_ROW,
+};
+
+struct tegra_kbc_pin_cfg {
+	enum tegra_pin_type type;
+	unsigned char num;
+};
+
 struct tegra_kbc {
+	struct device *dev;
+	unsigned int debounce_cnt;
+	unsigned int repeat_cnt;
+	struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
+	const struct matrix_keymap_data *keymap_data;
+	bool wakeup;
 	void __iomem *mmio;
 	struct input_dev *idev;
-	unsigned int irq;
+	int irq;
 	spinlock_t lock;
 	unsigned int repoll_dly;
 	unsigned long cp_dly_jiffies;
@@ -78,7 +102,6 @@ struct tegra_kbc {
 	bool use_fn_map;
 	bool use_ghost_filter;
 	bool keypress_caused_wake;
-	const struct tegra_kbc_platform_data *pdata;
 	unsigned short keycode[KBC_MAX_KEY * 2];
 	unsigned short current_keys[KBC_MAX_KPENT];
 	unsigned int num_pressed_keys;
@@ -87,147 +110,6 @@ struct tegra_kbc {
 	struct clk *clk;
 };
 
-static const u32 tegra_kbc_default_keymap[] = {
-	KEY(0, 2, KEY_W),
-	KEY(0, 3, KEY_S),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Z),
-	KEY(0, 7, KEY_FN),
-
-	KEY(1, 7, KEY_LEFTMETA),
-
-	KEY(2, 6, KEY_RIGHTALT),
-	KEY(2, 7, KEY_LEFTALT),
-
-	KEY(3, 0, KEY_5),
-	KEY(3, 1, KEY_4),
-	KEY(3, 2, KEY_R),
-	KEY(3, 3, KEY_E),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_D),
-	KEY(3, 6, KEY_X),
-
-	KEY(4, 0, KEY_7),
-	KEY(4, 1, KEY_6),
-	KEY(4, 2, KEY_T),
-	KEY(4, 3, KEY_H),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_V),
-	KEY(4, 6, KEY_C),
-	KEY(4, 7, KEY_SPACE),
-
-	KEY(5, 0, KEY_9),
-	KEY(5, 1, KEY_8),
-	KEY(5, 2, KEY_U),
-	KEY(5, 3, KEY_Y),
-	KEY(5, 4, KEY_J),
-	KEY(5, 5, KEY_N),
-	KEY(5, 6, KEY_B),
-	KEY(5, 7, KEY_BACKSLASH),
-
-	KEY(6, 0, KEY_MINUS),
-	KEY(6, 1, KEY_0),
-	KEY(6, 2, KEY_O),
-	KEY(6, 3, KEY_I),
-	KEY(6, 4, KEY_L),
-	KEY(6, 5, KEY_K),
-	KEY(6, 6, KEY_COMMA),
-	KEY(6, 7, KEY_M),
-
-	KEY(7, 1, KEY_EQUAL),
-	KEY(7, 2, KEY_RIGHTBRACE),
-	KEY(7, 3, KEY_ENTER),
-	KEY(7, 7, KEY_MENU),
-
-	KEY(8, 4, KEY_RIGHTSHIFT),
-	KEY(8, 5, KEY_LEFTSHIFT),
-
-	KEY(9, 5, KEY_RIGHTCTRL),
-	KEY(9, 7, KEY_LEFTCTRL),
-
-	KEY(11, 0, KEY_LEFTBRACE),
-	KEY(11, 1, KEY_P),
-	KEY(11, 2, KEY_APOSTROPHE),
-	KEY(11, 3, KEY_SEMICOLON),
-	KEY(11, 4, KEY_SLASH),
-	KEY(11, 5, KEY_DOT),
-
-	KEY(12, 0, KEY_F10),
-	KEY(12, 1, KEY_F9),
-	KEY(12, 2, KEY_BACKSPACE),
-	KEY(12, 3, KEY_3),
-	KEY(12, 4, KEY_2),
-	KEY(12, 5, KEY_UP),
-	KEY(12, 6, KEY_PRINT),
-	KEY(12, 7, KEY_PAUSE),
-
-	KEY(13, 0, KEY_INSERT),
-	KEY(13, 1, KEY_DELETE),
-	KEY(13, 3, KEY_PAGEUP),
-	KEY(13, 4, KEY_PAGEDOWN),
-	KEY(13, 5, KEY_RIGHT),
-	KEY(13, 6, KEY_DOWN),
-	KEY(13, 7, KEY_LEFT),
-
-	KEY(14, 0, KEY_F11),
-	KEY(14, 1, KEY_F12),
-	KEY(14, 2, KEY_F8),
-	KEY(14, 3, KEY_Q),
-	KEY(14, 4, KEY_F4),
-	KEY(14, 5, KEY_F3),
-	KEY(14, 6, KEY_1),
-	KEY(14, 7, KEY_F7),
-
-	KEY(15, 0, KEY_ESC),
-	KEY(15, 1, KEY_GRAVE),
-	KEY(15, 2, KEY_F5),
-	KEY(15, 3, KEY_TAB),
-	KEY(15, 4, KEY_F1),
-	KEY(15, 5, KEY_F2),
-	KEY(15, 6, KEY_CAPSLOCK),
-	KEY(15, 7, KEY_F6),
-
-	/* Software Handled Function Keys */
-	KEY(20, 0, KEY_KP7),
-
-	KEY(21, 0, KEY_KP9),
-	KEY(21, 1, KEY_KP8),
-	KEY(21, 2, KEY_KP4),
-	KEY(21, 4, KEY_KP1),
-
-	KEY(22, 1, KEY_KPSLASH),
-	KEY(22, 2, KEY_KP6),
-	KEY(22, 3, KEY_KP5),
-	KEY(22, 4, KEY_KP3),
-	KEY(22, 5, KEY_KP2),
-	KEY(22, 7, KEY_KP0),
-
-	KEY(27, 1, KEY_KPASTERISK),
-	KEY(27, 3, KEY_KPMINUS),
-	KEY(27, 4, KEY_KPPLUS),
-	KEY(27, 5, KEY_KPDOT),
-
-	KEY(28, 5, KEY_VOLUMEUP),
-
-	KEY(29, 3, KEY_HOME),
-	KEY(29, 4, KEY_END),
-	KEY(29, 5, KEY_BRIGHTNESSDOWN),
-	KEY(29, 6, KEY_VOLUMEDOWN),
-	KEY(29, 7, KEY_BRIGHTNESSUP),
-
-	KEY(30, 0, KEY_NUMLOCK),
-	KEY(30, 1, KEY_SCROLLLOCK),
-	KEY(30, 2, KEY_MUTE),
-
-	KEY(31, 4, KEY_HELP),
-};
-
-static const
-struct matrix_keymap_data tegra_kbc_default_keymap_data = {
-	.keymap		= tegra_kbc_default_keymap,
-	.keymap_size	= ARRAY_SIZE(tegra_kbc_default_keymap),
-};
-
 static void tegra_kbc_report_released_keys(struct input_dev *input,
 					   unsigned short old_keycodes[],
 					   unsigned int old_num_keys,
@@ -357,18 +239,6 @@ static void tegra_kbc_set_fifo_interrupt(struct tegra_kbc *kbc, bool enable)
 	writel(val, kbc->mmio + KBC_CONTROL_0);
 }
 
-static void tegra_kbc_set_keypress_interrupt(struct tegra_kbc *kbc, bool enable)
-{
-	u32 val;
-
-	val = readl(kbc->mmio + KBC_CONTROL_0);
-	if (enable)
-		val |= KBC_CONTROL_KEYPRESS_INT_EN;
-	else
-		val &= ~KBC_CONTROL_KEYPRESS_INT_EN;
-	writel(val, kbc->mmio + KBC_CONTROL_0);
-}
-
 static void tegra_kbc_keypress_timer(unsigned long data)
 {
 	struct tegra_kbc *kbc = (struct tegra_kbc *)data;
@@ -439,12 +309,11 @@ static irqreturn_t tegra_kbc_isr(int irq, void *args)
 
 static void tegra_kbc_setup_wakekeys(struct tegra_kbc *kbc, bool filter)
 {
-	const struct tegra_kbc_platform_data *pdata = kbc->pdata;
 	int i;
 	unsigned int rst_val;
 
 	/* Either mask all keys or none. */
-	rst_val = (filter && !pdata->wakeup) ? ~0 : 0;
+	rst_val = (filter && !kbc->wakeup) ? ~0 : 0;
 
 	for (i = 0; i < KBC_MAX_ROW; i++)
 		writel(rst_val, kbc->mmio + KBC_ROW0_MASK_0 + i * 4);
@@ -452,7 +321,6 @@ static void tegra_kbc_setup_wakekeys(struct tegra_kbc *kbc, bool filter)
 
 static void tegra_kbc_config_pins(struct tegra_kbc *kbc)
 {
-	const struct tegra_kbc_platform_data *pdata = kbc->pdata;
 	int i;
 
 	for (i = 0; i < KBC_MAX_GPIO; i++) {
@@ -468,13 +336,13 @@ static void tegra_kbc_config_pins(struct tegra_kbc *kbc)
 		row_cfg &= ~r_mask;
 		col_cfg &= ~c_mask;
 
-		switch (pdata->pin_cfg[i].type) {
+		switch (kbc->pin_cfg[i].type) {
 		case PIN_CFG_ROW:
-			row_cfg |= ((pdata->pin_cfg[i].num << 1) | 1) << r_shft;
+			row_cfg |= ((kbc->pin_cfg[i].num << 1) | 1) << r_shft;
 			break;
 
 		case PIN_CFG_COL:
-			col_cfg |= ((pdata->pin_cfg[i].num << 1) | 1) << c_shft;
+			col_cfg |= ((kbc->pin_cfg[i].num << 1) | 1) << c_shft;
 			break;
 
 		case PIN_CFG_IGNORE:
@@ -488,7 +356,6 @@ static void tegra_kbc_config_pins(struct tegra_kbc *kbc)
 
 static int tegra_kbc_start(struct tegra_kbc *kbc)
 {
-	const struct tegra_kbc_platform_data *pdata = kbc->pdata;
 	unsigned int debounce_cnt;
 	u32 val = 0;
 
@@ -503,10 +370,10 @@ static int tegra_kbc_start(struct tegra_kbc *kbc)
 	tegra_kbc_config_pins(kbc);
 	tegra_kbc_setup_wakekeys(kbc, false);
 
-	writel(pdata->repeat_cnt, kbc->mmio + KBC_RPT_DLY_0);
+	writel(kbc->repeat_cnt, kbc->mmio + KBC_RPT_DLY_0);
 
 	/* Keyboard debounce count is maximum of 12 bits. */
-	debounce_cnt = min(pdata->debounce_cnt, KBC_MAX_DEBOUNCE_CNT);
+	debounce_cnt = min(kbc->debounce_cnt, KBC_MAX_DEBOUNCE_CNT);
 	val = KBC_DEBOUNCE_CNT_SHIFT(debounce_cnt);
 	val |= KBC_FIFO_TH_CNT_SHIFT(1); /* set fifo interrupt threshold to 1 */
 	val |= KBC_CONTROL_FIFO_CNT_INT_EN;  /* interrupt on FIFO threshold */
@@ -573,21 +440,20 @@ static void tegra_kbc_close(struct input_dev *dev)
 	return tegra_kbc_stop(kbc);
 }
 
-static bool
+static bool tegra_kbc_check_pin_cfg(const struct tegra_kbc *kbc,
-tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata,
+					unsigned int *num_rows)
-			struct device *dev, unsigned int *num_rows)
 {
 	int i;
 
 	*num_rows = 0;
 
 	for (i = 0; i < KBC_MAX_GPIO; i++) {
-		const struct tegra_kbc_pin_cfg *pin_cfg = &pdata->pin_cfg[i];
+		const struct tegra_kbc_pin_cfg *pin_cfg = &kbc->pin_cfg[i];
 
 		switch (pin_cfg->type) {
 		case PIN_CFG_ROW:
 			if (pin_cfg->num >= KBC_MAX_ROW) {
-				dev_err(dev,
+				dev_err(kbc->dev,
 					"pin_cfg[%d]: invalid row number %d\n",
 					i, pin_cfg->num);
 				return false;
@@ -597,7 +463,7 @@ tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata,
 
 		case PIN_CFG_COL:
 			if (pin_cfg->num >= KBC_MAX_COL) {
-				dev_err(dev,
+				dev_err(kbc->dev,
 					"pin_cfg[%d]: invalid column number %d\n",
 					i, pin_cfg->num);
 				return false;
@@ -608,7 +474,7 @@ tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata,
 			break;
 
 		default:
-			dev_err(dev,
+			dev_err(kbc->dev,
 				"pin_cfg[%d]: invalid entry type %d\n",
 				pin_cfg->type, pin_cfg->num);
 			return false;
@@ -618,154 +484,140 @@ tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata,
 	return true;
 }
 
-#ifdef CONFIG_OF
+static int tegra_kbc_parse_dt(struct tegra_kbc *kbc)
-static struct tegra_kbc_platform_data *tegra_kbc_dt_parse_pdata(
-	struct platform_device *pdev)
 {
-	struct tegra_kbc_platform_data *pdata;
+	struct device_node *np = kbc->dev->of_node;
-	struct device_node *np = pdev->dev.of_node;
 	u32 prop;
 	int i;
-
+	u32 num_rows = 0;
-	if (!np)
+	u32 num_cols = 0;
-		return NULL;
+	u32 cols_cfg[KBC_MAX_GPIO];
-
+	u32 rows_cfg[KBC_MAX_GPIO];
-	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	int proplen;
-	if (!pdata)
+	int ret;
-		return NULL;
 
 	if (!of_property_read_u32(np, "nvidia,debounce-delay-ms", &prop))
-		pdata->debounce_cnt = prop;
+		kbc->debounce_cnt = prop;
 
 	if (!of_property_read_u32(np, "nvidia,repeat-delay-ms", &prop))
-		pdata->repeat_cnt = prop;
+		kbc->repeat_cnt = prop;
 
 	if (of_find_property(np, "nvidia,needs-ghost-filter", NULL))
-		pdata->use_ghost_filter = true;
+		kbc->use_ghost_filter = true;
 
 	if (of_find_property(np, "nvidia,wakeup-source", NULL))
-		pdata->wakeup = true;
+		kbc->wakeup = true;
 
-	/*
+	if (!of_get_property(np, "nvidia,kbc-row-pins", &proplen)) {
-	 * All currently known keymaps with device tree support use the same
+		dev_err(kbc->dev, "property nvidia,kbc-row-pins not found\n");
-	 * pin_cfg, so set it up here.
+		return -ENOENT;
-	 */
+	}
-	for (i = 0; i < KBC_MAX_ROW; i++) {
+	num_rows = proplen / sizeof(u32);
-		pdata->pin_cfg[i].num = i;
+
-		pdata->pin_cfg[i].type = PIN_CFG_ROW;
+	if (!of_get_property(np, "nvidia,kbc-col-pins", &proplen)) {
+		dev_err(kbc->dev, "property nvidia,kbc-col-pins not found\n");
+		return -ENOENT;
+	}
+	num_cols = proplen / sizeof(u32);
+
+	if (!of_get_property(np, "linux,keymap", &proplen)) {
+		dev_err(kbc->dev, "property linux,keymap not found\n");
+		return -ENOENT;
 	}
 
-	for (i = 0; i < KBC_MAX_COL; i++) {
+	if (!num_rows || !num_cols || ((num_rows + num_cols) > KBC_MAX_GPIO)) {
-		pdata->pin_cfg[KBC_MAX_ROW + i].num = i;
+		dev_err(kbc->dev,
-		pdata->pin_cfg[KBC_MAX_ROW + i].type = PIN_CFG_COL;
+			"keypad rows/columns not porperly specified\n");
+		return -EINVAL;
 	}
 
-	return pdata;
+	/* Set all pins as non-configured */
-}
+	for (i = 0; i < KBC_MAX_GPIO; i++)
-#else
+		kbc->pin_cfg[i].type = PIN_CFG_IGNORE;
-static inline struct tegra_kbc_platform_data *tegra_kbc_dt_parse_pdata(
-	struct platform_device *pdev)
-{
-	return NULL;
-}
-#endif
 
-static int tegra_kbd_setup_keymap(struct tegra_kbc *kbc)
+	ret = of_property_read_u32_array(np, "nvidia,kbc-row-pins",
-{
+				rows_cfg, num_rows);
-	const struct tegra_kbc_platform_data *pdata = kbc->pdata;
+	if (ret < 0) {
-	const struct matrix_keymap_data *keymap_data = pdata->keymap_data;
+		dev_err(kbc->dev, "Rows configurations are not proper\n");
-	unsigned int keymap_rows = KBC_MAX_KEY;
+		return -EINVAL;
-	int retval;
-
-	if (keymap_data && pdata->use_fn_map)
-		keymap_rows *= 2;
-
-	retval = matrix_keypad_build_keymap(keymap_data, NULL,
-					    keymap_rows, KBC_MAX_COL,
-					    kbc->keycode, kbc->idev);
-	if (retval == -ENOSYS || retval == -ENOENT) {
-		/*
-		 * If there is no OF support in kernel or keymap
-		 * property is missing, use default keymap.
-		 */
-		retval = matrix_keypad_build_keymap(
-					&tegra_kbc_default_keymap_data, NULL,
-					keymap_rows, KBC_MAX_COL,
-					kbc->keycode, kbc->idev);
 	}
 
-	return retval;
+	ret = of_property_read_u32_array(np, "nvidia,kbc-col-pins",
+				cols_cfg, num_cols);
+	if (ret < 0) {
+		dev_err(kbc->dev, "Cols configurations are not proper\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num_rows; i++) {
+		kbc->pin_cfg[rows_cfg[i]].type = PIN_CFG_ROW;
+		kbc->pin_cfg[rows_cfg[i]].num = i;
+	}
+
+	for (i = 0; i < num_cols; i++) {
+		kbc->pin_cfg[cols_cfg[i]].type = PIN_CFG_COL;
+		kbc->pin_cfg[cols_cfg[i]].num = i;
+	}
+
+	return 0;
 }
 
 static int tegra_kbc_probe(struct platform_device *pdev)
 {
-	const struct tegra_kbc_platform_data *pdata = pdev->dev.platform_data;
 	struct tegra_kbc *kbc;
-	struct input_dev *input_dev;
 	struct resource *res;
-	int irq;
 	int err;
 	int num_rows = 0;
 	unsigned int debounce_cnt;
 	unsigned int scan_time_rows;
+	unsigned int keymap_rows = KBC_MAX_KEY;
 
-	if (!pdata)
+	kbc = devm_kzalloc(&pdev->dev, sizeof(*kbc), GFP_KERNEL);
-		pdata = tegra_kbc_dt_parse_pdata(pdev);
+	if (!kbc) {
-
+		dev_err(&pdev->dev, "failed to alloc memory for kbc\n");
-	if (!pdata)
+		return -ENOMEM;
-		return -EINVAL;
-
-	if (!tegra_kbc_check_pin_cfg(pdata, &pdev->dev, &num_rows)) {
-		err = -EINVAL;
-		goto err_free_pdata;
 	}
 
+	kbc->dev = &pdev->dev;
+	spin_lock_init(&kbc->lock);
+
+	err = tegra_kbc_parse_dt(kbc);
+	if (err)
+		return err;
+
+	if (!tegra_kbc_check_pin_cfg(kbc, &num_rows))
+		return -EINVAL;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "failed to get I/O memory\n");
-		err = -ENXIO;
+		return -ENXIO;
-		goto err_free_pdata;
 	}
 
-	irq = platform_get_irq(pdev, 0);
+	kbc->irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
+	if (kbc->irq < 0) {
 		dev_err(&pdev->dev, "failed to get keyboard IRQ\n");
-		err = -ENXIO;
+		return -ENXIO;
-		goto err_free_pdata;
 	}
 
-	kbc = kzalloc(sizeof(*kbc), GFP_KERNEL);
+	kbc->idev = devm_input_allocate_device(&pdev->dev);
-	input_dev = input_allocate_device();
+	if (!kbc->idev) {
-	if (!kbc || !input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
-		err = -ENOMEM;
+		return -ENOMEM;
-		goto err_free_mem;
 	}
 
-	kbc->pdata = pdata;
-	kbc->idev = input_dev;
-	kbc->irq = irq;
-	spin_lock_init(&kbc->lock);
 	setup_timer(&kbc->timer, tegra_kbc_keypress_timer, (unsigned long)kbc);
 
-	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	kbc->mmio = devm_request_and_ioremap(&pdev->dev, res);
-	if (!res) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		err = -EBUSY;
-		goto err_free_mem;
-	}
-
-	kbc->mmio = ioremap(res->start, resource_size(res));
 	if (!kbc->mmio) {
-		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		dev_err(&pdev->dev, "Cannot request memregion/iomap address\n");
-		err = -ENXIO;
+		return -EBUSY;
-		goto err_free_mem_region;
 	}
 
-	kbc->clk = clk_get(&pdev->dev, NULL);
+	kbc->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(kbc->clk)) {
 		dev_err(&pdev->dev, "failed to get keyboard clock\n");
-		err = PTR_ERR(kbc->clk);
+		return PTR_ERR(kbc->clk);
-		goto err_iounmap;
 	}
 
 	/*
@@ -774,37 +626,38 @@ static int tegra_kbc_probe(struct platform_device *pdev)
 	 * the rows. There is an additional delay before the row scanning
 	 * starts. The repoll delay is computed in milliseconds.
 	 */
-	debounce_cnt = min(pdata->debounce_cnt, KBC_MAX_DEBOUNCE_CNT);
+	debounce_cnt = min(kbc->debounce_cnt, KBC_MAX_DEBOUNCE_CNT);
 	scan_time_rows = (KBC_ROW_SCAN_TIME + debounce_cnt) * num_rows;
-	kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + pdata->repeat_cnt;
+	kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + kbc->repeat_cnt;
 	kbc->repoll_dly = DIV_ROUND_UP(kbc->repoll_dly, KBC_CYCLE_MS);
 
-	kbc->wakeup_key = pdata->wakeup_key;
+	kbc->idev->name = pdev->name;
-	kbc->use_fn_map = pdata->use_fn_map;
+	kbc->idev->id.bustype = BUS_HOST;
-	kbc->use_ghost_filter = pdata->use_ghost_filter;
+	kbc->idev->dev.parent = &pdev->dev;
+	kbc->idev->open = tegra_kbc_open;
+	kbc->idev->close = tegra_kbc_close;
 
-	input_dev->name = pdev->name;
+	if (kbc->keymap_data && kbc->use_fn_map)
-	input_dev->id.bustype = BUS_HOST;
+		keymap_rows *= 2;
-	input_dev->dev.parent = &pdev->dev;
-	input_dev->open = tegra_kbc_open;
-	input_dev->close = tegra_kbc_close;
 
-	err = tegra_kbd_setup_keymap(kbc);
+	err = matrix_keypad_build_keymap(kbc->keymap_data, NULL,
+					 keymap_rows, KBC_MAX_COL,
+					 kbc->keycode, kbc->idev);
 	if (err) {
 		dev_err(&pdev->dev, "failed to setup keymap\n");
-		goto err_put_clk;
+		return err;
 	}
 
-	__set_bit(EV_REP, input_dev->evbit);
+	__set_bit(EV_REP, kbc->idev->evbit);
-	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_capability(kbc->idev, EV_MSC, MSC_SCAN);
 
-	input_set_drvdata(input_dev, kbc);
+	input_set_drvdata(kbc->idev, kbc);
 
-	err = request_irq(kbc->irq, tegra_kbc_isr,
+	err = devm_request_irq(&pdev->dev, kbc->irq, tegra_kbc_isr,
 			  IRQF_NO_SUSPEND | IRQF_TRIGGER_HIGH, pdev->name, kbc);
 	if (err) {
 		dev_err(&pdev->dev, "failed to request keyboard IRQ\n");
-		goto err_put_clk;
+		return err;
 	}
 
 	disable_irq(kbc->irq);
@@ -812,60 +665,28 @@ static int tegra_kbc_probe(struct platform_device *pdev)
 	err = input_register_device(kbc->idev);
 	if (err) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		goto err_free_irq;
+		return err;
 	}
 
 	platform_set_drvdata(pdev, kbc);
-	device_init_wakeup(&pdev->dev, pdata->wakeup);
+	device_init_wakeup(&pdev->dev, kbc->wakeup);
-
-	return 0;
-
-err_free_irq:
-	free_irq(kbc->irq, pdev);
-err_put_clk:
-	clk_put(kbc->clk);
-err_iounmap:
-	iounmap(kbc->mmio);
-err_free_mem_region:
-	release_mem_region(res->start, resource_size(res));
-err_free_mem:
-	input_free_device(input_dev);
-	kfree(kbc);
-err_free_pdata:
-	if (!pdev->dev.platform_data)
-		kfree(pdata);
-
-	return err;
-}
-
-static int tegra_kbc_remove(struct platform_device *pdev)
-{
-	struct tegra_kbc *kbc = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	platform_set_drvdata(pdev, NULL);
-
-	free_irq(kbc->irq, pdev);
-	clk_put(kbc->clk);
-
-	input_unregister_device(kbc->idev);
-	iounmap(kbc->mmio);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	/*
-	 * If we do not have platform data attached to the device we
-	 * allocated it ourselves and thus need to free it.
-	 */
-	if (!pdev->dev.platform_data)
-		kfree(kbc->pdata);
-
-	kfree(kbc);
 
 	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
+static void tegra_kbc_set_keypress_interrupt(struct tegra_kbc *kbc, bool enable)
+{
+	u32 val;
+
+	val = readl(kbc->mmio + KBC_CONTROL_0);
+	if (enable)
+		val |= KBC_CONTROL_KEYPRESS_INT_EN;
+	else
+		val &= ~KBC_CONTROL_KEYPRESS_INT_EN;
+	writel(val, kbc->mmio + KBC_CONTROL_0);
+}
+
 static int tegra_kbc_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -954,7 +775,6 @@ MODULE_DEVICE_TABLE(of, tegra_kbc_of_match);
 
 static struct platform_driver tegra_kbc_driver = {
 	.probe		= tegra_kbc_probe,
-	.remove		= tegra_kbc_remove,
 	.driver	= {
 		.name	= "tegra-kbc",
 		.owner  = THIS_MODULE,

drivers/input/misc/adxl34x.c

@@ -232,7 +232,7 @@ static const struct adxl34x_platform_data adxl34x_default_init = {
 
 	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY {x,y,z} */
 	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
-	.fifo_mode = FIFO_STREAM,
+	.fifo_mode = ADXL_FIFO_STREAM,
 	.watermark = 0,
 };
 
@@ -732,7 +732,7 @@ struct adxl34x *adxl34x_probe(struct device *dev, int irq,
 	mutex_init(&ac->mutex);
 
 	input_dev->name = "ADXL34x accelerometer";
-	revid = ac->bops->read(dev, DEVID);
+	revid = AC_READ(ac, DEVID);
 
 	switch (revid) {
 	case ID_ADXL345:
@@ -809,7 +809,7 @@ struct adxl34x *adxl34x_probe(struct device *dev, int irq,
 	if (FIFO_MODE(pdata->fifo_mode) == FIFO_BYPASS)
 		ac->fifo_delay = false;
 
-	ac->bops->write(dev, POWER_CTL, 0);
+	AC_WRITE(ac, POWER_CTL, 0);
 
 	err = request_threaded_irq(ac->irq, NULL, adxl34x_irq,
 				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
@@ -827,7 +827,6 @@ struct adxl34x *adxl34x_probe(struct device *dev, int irq,
 	if (err)
 		goto err_remove_attr;
 
-	AC_WRITE(ac, THRESH_TAP, pdata->tap_threshold);
 	AC_WRITE(ac, OFSX, pdata->x_axis_offset);
 	ac->hwcal.x = pdata->x_axis_offset;
 	AC_WRITE(ac, OFSY, pdata->y_axis_offset);

drivers/input/misc/bma150.c

@@ -46,18 +46,6 @@
 #define BMA150_POLL_MAX		200
 #define BMA150_POLL_MIN		0
 
-#define BMA150_BW_25HZ		0
-#define BMA150_BW_50HZ		1
-#define BMA150_BW_100HZ		2
-#define BMA150_BW_190HZ		3
-#define BMA150_BW_375HZ		4
-#define BMA150_BW_750HZ		5
-#define BMA150_BW_1500HZ	6
-
-#define BMA150_RANGE_2G		0
-#define BMA150_RANGE_4G		1
-#define BMA150_RANGE_8G		2
-
 #define BMA150_MODE_NORMAL	0
 #define BMA150_MODE_SLEEP	2
 #define BMA150_MODE_WAKE_UP	3
@@ -372,7 +360,7 @@ static int bma150_open(struct bma150_data *bma150)
 	int error;
 
 	error = pm_runtime_get_sync(&bma150->client->dev);
-	if (error && error != -ENOSYS)
+	if (error < 0 && error != -ENOSYS)
 		return error;
 
 	/*

drivers/input/misc/twl4030-vibra.c

@@ -43,7 +43,6 @@ struct vibra_info {
 	struct device		*dev;
 	struct input_dev	*input_dev;
 
-	struct workqueue_struct *workqueue;
 	struct work_struct	play_work;
 
 	bool			enabled;
@@ -143,19 +142,7 @@ static int vibra_play(struct input_dev *input, void *data,
 	if (!info->speed)
 		info->speed = effect->u.rumble.weak_magnitude >> 9;
 	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 0 : 1;
-	queue_work(info->workqueue, &info->play_work);
+	schedule_work(&info->play_work);
-	return 0;
-}
-
-static int twl4030_vibra_open(struct input_dev *input)
-{
-	struct vibra_info *info = input_get_drvdata(input);
-
-	info->workqueue = create_singlethread_workqueue("vibra");
-	if (info->workqueue == NULL) {
-		dev_err(&input->dev, "couldn't create workqueue\n");
-		return -ENOMEM;
-	}
 	return 0;
 }
 
@@ -164,9 +151,6 @@ static void twl4030_vibra_close(struct input_dev *input)
 	struct vibra_info *info = input_get_drvdata(input);
 
 	cancel_work_sync(&info->play_work);
-	INIT_WORK(&info->play_work, vibra_play_work); /* cleanup */
-	destroy_workqueue(info->workqueue);
-	info->workqueue = NULL;
 
 	if (info->enabled)
 		vibra_disable(info);
@@ -219,7 +203,7 @@ static int twl4030_vibra_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
 
@@ -227,11 +211,10 @@ static int twl4030_vibra_probe(struct platform_device *pdev)
 	info->coexist = twl4030_vibra_check_coexist(pdata, twl4030_core_node);
 	INIT_WORK(&info->play_work, vibra_play_work);
 
-	info->input_dev = input_allocate_device();
+	info->input_dev = devm_input_allocate_device(&pdev->dev);
 	if (info->input_dev == NULL) {
 		dev_err(&pdev->dev, "couldn't allocate input device\n");
-		ret = -ENOMEM;
+		return -ENOMEM;
-		goto err_kzalloc;
 	}
 
 	input_set_drvdata(info->input_dev, info);
@@ -239,14 +222,13 @@ static int twl4030_vibra_probe(struct platform_device *pdev)
 	info->input_dev->name = "twl4030:vibrator";
 	info->input_dev->id.version = 1;
 	info->input_dev->dev.parent = pdev->dev.parent;
-	info->input_dev->open = twl4030_vibra_open;
 	info->input_dev->close = twl4030_vibra_close;
 	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
 
 	ret = input_ff_create_memless(info->input_dev, NULL, vibra_play);
 	if (ret < 0) {
 		dev_dbg(&pdev->dev, "couldn't register vibrator to FF\n");
-		goto err_ialloc;
+		return ret;
 	}
 
 	ret = input_register_device(info->input_dev);
@@ -262,28 +244,11 @@ static int twl4030_vibra_probe(struct platform_device *pdev)
 
 err_iff:
 	input_ff_destroy(info->input_dev);
-err_ialloc:
-	input_free_device(info->input_dev);
-err_kzalloc:
-	kfree(info);
 	return ret;
 }
 
-static int twl4030_vibra_remove(struct platform_device *pdev)
-{
-	struct vibra_info *info = platform_get_drvdata(pdev);
-
-	/* this also free ff-memless and calls close if needed */
-	input_unregister_device(info->input_dev);
-	kfree(info);
-	platform_set_drvdata(pdev, NULL);
-
-	return 0;
-}
-
 static struct platform_driver twl4030_vibra_driver = {
 	.probe		= twl4030_vibra_probe,
-	.remove		= twl4030_vibra_remove,
 	.driver		= {
 		.name	= "twl4030-vibra",
 		.owner	= THIS_MODULE,

drivers/input/misc/twl6040-vibra.c

@@ -275,7 +275,7 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info) {
 		dev_err(&pdev->dev, "couldn't allocate memory\n");
 		return -ENOMEM;
@@ -309,24 +309,65 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 	if ((!info->vibldrv_res && !info->viblmotor_res) ||
 	    (!info->vibrdrv_res && !info->vibrmotor_res)) {
 		dev_err(info->dev, "invalid vibra driver/motor resistance\n");
-		ret = -EINVAL;
+		return -EINVAL;
-		goto err_kzalloc;
 	}
 
 	info->irq = platform_get_irq(pdev, 0);
 	if (info->irq < 0) {
 		dev_err(info->dev, "invalid irq\n");
-		ret = -EINVAL;
+		return -EINVAL;
-		goto err_kzalloc;
 	}
 
 	mutex_init(&info->mutex);
 
+	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+					twl6040_vib_irq_handler, 0,
+					"twl6040_irq_vib", info);
+	if (ret) {
+		dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
+		return ret;
+	}
+
+	info->supplies[0].supply = "vddvibl";
+	info->supplies[1].supply = "vddvibr";
+	/*
+	 * When booted with Device tree the regulators are attached to the
+	 * parent device (twl6040 MFD core)
+	 */
+	ret = regulator_bulk_get(pdata ? info->dev : twl6040_core_dev,
+				 ARRAY_SIZE(info->supplies), info->supplies);
+	if (ret) {
+		dev_err(info->dev, "couldn't get regulators %d\n", ret);
+		return ret;
+	}
+
+	if (vddvibl_uV) {
+		ret = regulator_set_voltage(info->supplies[0].consumer,
+					    vddvibl_uV, vddvibl_uV);
+		if (ret) {
+			dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
+				ret);
+			goto err_regulator;
+		}
+	}
+
+	if (vddvibr_uV) {
+		ret = regulator_set_voltage(info->supplies[1].consumer,
+					    vddvibr_uV, vddvibr_uV);
+		if (ret) {
+			dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
+				ret);
+			goto err_regulator;
+		}
+	}
+
+	INIT_WORK(&info->play_work, vibra_play_work);
+
 	info->input_dev = input_allocate_device();
 	if (info->input_dev == NULL) {
 		dev_err(info->dev, "couldn't allocate input device\n");
 		ret = -ENOMEM;
-		goto err_kzalloc;
+		goto err_regulator;
 	}
 
 	input_set_drvdata(info->input_dev, info);
@@ -351,70 +392,14 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, info);
 
-	ret = request_threaded_irq(info->irq, NULL, twl6040_vib_irq_handler, 0,
-				   "twl6040_irq_vib", info);
-	if (ret) {
-		dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
-		goto err_irq;
-	}
-
-	info->supplies[0].supply = "vddvibl";
-	info->supplies[1].supply = "vddvibr";
-	/*
-	 * When booted with Device tree the regulators are attached to the
-	 * parent device (twl6040 MFD core)
-	 */
-	ret = regulator_bulk_get(pdata ? info->dev : twl6040_core_dev,
-				 ARRAY_SIZE(info->supplies), info->supplies);
-	if (ret) {
-		dev_err(info->dev, "couldn't get regulators %d\n", ret);
-		goto err_regulator;
-	}
-
-	if (vddvibl_uV) {
-		ret = regulator_set_voltage(info->supplies[0].consumer,
-					    vddvibl_uV, vddvibl_uV);
-		if (ret) {
-			dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
-				ret);
-			goto err_voltage;
-		}
-	}
-
-	if (vddvibr_uV) {
-		ret = regulator_set_voltage(info->supplies[1].consumer,
-					    vddvibr_uV, vddvibr_uV);
-		if (ret) {
-			dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
-				ret);
-			goto err_voltage;
-		}
-	}
-
-	info->workqueue = alloc_workqueue("twl6040-vibra", 0, 0);
-	if (info->workqueue == NULL) {
-		dev_err(info->dev, "couldn't create workqueue\n");
-		ret = -ENOMEM;
-		goto err_voltage;
-	}
-	INIT_WORK(&info->play_work, vibra_play_work);
-
 	return 0;
 
-err_voltage:
-	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
-err_regulator:
-	free_irq(info->irq, info);
-err_irq:
-	input_unregister_device(info->input_dev);
-	info->input_dev = NULL;
 err_iff:
-	if (info->input_dev)
+	input_ff_destroy(info->input_dev);
-		input_ff_destroy(info->input_dev);
 err_ialloc:
 	input_free_device(info->input_dev);
-err_kzalloc:
+err_regulator:
-	kfree(info);
+	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
 	return ret;
 }
 
@@ -423,10 +408,7 @@ static int twl6040_vibra_remove(struct platform_device *pdev)
 	struct vibra_info *info = platform_get_drvdata(pdev);
 
 	input_unregister_device(info->input_dev);
-	free_irq(info->irq, info);
 	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
-	destroy_workqueue(info->workqueue);
-	kfree(info);
 
 	return 0;
 }

drivers/input/misc/wm831x-on.c

@@ -86,7 +86,7 @@ static int wm831x_on_probe(struct platform_device *pdev)
 	wm831x_on->wm831x = wm831x;
 	INIT_DELAYED_WORK(&wm831x_on->work, wm831x_poll_on);
 
-	wm831x_on->dev = input_allocate_device();
+	wm831x_on->dev = devm_input_allocate_device(&pdev->dev);
 	if (!wm831x_on->dev) {
 		dev_err(&pdev->dev, "Can't allocate input dev\n");
 		ret = -ENOMEM;
@@ -119,7 +119,6 @@ static int wm831x_on_probe(struct platform_device *pdev)
 err_irq:
 	free_irq(irq, wm831x_on);
 err_input_dev:
-	input_free_device(wm831x_on->dev);
 err:
 	return ret;
 }
@@ -131,7 +130,6 @@ static int wm831x_on_remove(struct platform_device *pdev)
 
 	free_irq(irq, wm831x_on);
 	cancel_delayed_work_sync(&wm831x_on->work);
-	input_unregister_device(wm831x_on->dev);
 
 	return 0;
 }

drivers/input/mouse/Kconfig

@@ -68,6 +68,16 @@ config MOUSE_PS2_SYNAPTICS
 
 	  If unsure, say Y.
 
+config MOUSE_PS2_CYPRESS
+       bool "Cypress PS/2 mouse protocol extension" if EXPERT
+       default y
+       depends on MOUSE_PS2
+       help
+         Say Y here if you have a Cypress PS/2 Trackpad connected to
+         your system.
+
+         If unsure, say Y.
+
 config MOUSE_PS2_LIFEBOOK
 	bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EXPERT
 	default y
@@ -193,6 +203,18 @@ config MOUSE_BCM5974
 	  To compile this driver as a module, choose M here: the
 	  module will be called bcm5974.
 
+config MOUSE_CYAPA
+	tristate "Cypress APA I2C Trackpad support"
+	depends on I2C
+	help
+	  This driver adds support for Cypress All Points Addressable (APA)
+	  I2C Trackpads, including the ones used in 2012 Samsung Chromebooks.
+
+	  Say Y here if you have a Cypress APA I2C Trackpad.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called cyapa.
+
 config MOUSE_INPORT
 	tristate "InPort/MS/ATIXL busmouse"
 	depends on ISA

drivers/input/mouse/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_MOUSE_AMIGA)		+= amimouse.o
 obj-$(CONFIG_MOUSE_APPLETOUCH)		+= appletouch.o
 obj-$(CONFIG_MOUSE_ATARI)		+= atarimouse.o
 obj-$(CONFIG_MOUSE_BCM5974)		+= bcm5974.o
+obj-$(CONFIG_MOUSE_CYAPA)		+= cyapa.o
 obj-$(CONFIG_MOUSE_GPIO)		+= gpio_mouse.o
 obj-$(CONFIG_MOUSE_INPORT)		+= inport.o
 obj-$(CONFIG_MOUSE_LOGIBM)		+= logibm.o
@@ -32,3 +33,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK)	+= lifebook.o
 psmouse-$(CONFIG_MOUSE_PS2_SENTELIC)	+= sentelic.o
 psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT)	+= trackpoint.o
 psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT)	+= touchkit_ps2.o
+psmouse-$(CONFIG_MOUSE_PS2_CYPRESS)	+= cypress_ps2.o

drivers/input/mouse/alps.h

@@ -12,35 +12,146 @@
 #ifndef _ALPS_H
 #define _ALPS_H
 
-#define ALPS_PROTO_V1	0
+#define ALPS_PROTO_V1	1
-#define ALPS_PROTO_V2	1
+#define ALPS_PROTO_V2	2
-#define ALPS_PROTO_V3	2
+#define ALPS_PROTO_V3	3
-#define ALPS_PROTO_V4	3
+#define ALPS_PROTO_V4	4
 
+/**
+ * struct alps_model_info - touchpad ID table
+ * @signature: E7 response string to match.
+ * @command_mode_resp: For V3/V4 touchpads, the final byte of the EC response
+ *   (aka command mode response) identifies the firmware minor version.  This
+ *   can be used to distinguish different hardware models which are not
+ *   uniquely identifiable through their E7 responses.
+ * @proto_version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ *   known format for this model.  The first byte of the report, ANDed with
+ *   mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ *
+ * Many (but not all) ALPS touchpads can be identified by looking at the
+ * values returned in the "E7 report" and/or the "EC report."  This table
+ * lists a number of such touchpads.
+ */
 struct alps_model_info {
-        unsigned char signature[3];
+	unsigned char signature[3];
-	unsigned char command_mode_resp; /* v3/v4 only */
+	unsigned char command_mode_resp;
 	unsigned char proto_version;
-        unsigned char byte0, mask0;
+	unsigned char byte0, mask0;
-        unsigned char flags;
+	unsigned char flags;
 };
 
+/**
+ * struct alps_nibble_commands - encodings for register accesses
+ * @command: PS/2 command used for the nibble
+ * @data: Data supplied as an argument to the PS/2 command, if applicable
+ *
+ * The ALPS protocol uses magic sequences to transmit binary data to the
+ * touchpad, as it is generally not OK to send arbitrary bytes out the
+ * PS/2 port.  Each of the sequences in this table sends one nibble of the
+ * register address or (write) data.  Different versions of the ALPS protocol
+ * use slightly different encodings.
+ */
 struct alps_nibble_commands {
 	int command;
 	unsigned char data;
 };
 
+/**
+ * struct alps_fields - decoded version of the report packet
+ * @x_map: Bitmap of active X positions for MT.
+ * @y_map: Bitmap of active Y positions for MT.
+ * @fingers: Number of fingers for MT.
+ * @x: X position for ST.
+ * @y: Y position for ST.
+ * @z: Z position for ST.
+ * @first_mp: Packet is the first of a multi-packet report.
+ * @is_mp: Packet is part of a multi-packet report.
+ * @left: Left touchpad button is active.
+ * @right: Right touchpad button is active.
+ * @middle: Middle touchpad button is active.
+ * @ts_left: Left trackstick button is active.
+ * @ts_right: Right trackstick button is active.
+ * @ts_middle: Middle trackstick button is active.
+ */
+struct alps_fields {
+	unsigned int x_map;
+	unsigned int y_map;
+	unsigned int fingers;
+	unsigned int x;
+	unsigned int y;
+	unsigned int z;
+	unsigned int first_mp:1;
+	unsigned int is_mp:1;
+
+	unsigned int left:1;
+	unsigned int right:1;
+	unsigned int middle:1;
+
+	unsigned int ts_left:1;
+	unsigned int ts_right:1;
+	unsigned int ts_middle:1;
+};
+
+/**
+ * struct alps_data - private data structure for the ALPS driver
+ * @dev2: "Relative" device used to report trackstick or mouse activity.
+ * @phys: Physical path for the relative device.
+ * @nibble_commands: Command mapping used for touchpad register accesses.
+ * @addr_command: Command used to tell the touchpad that a register address
+ *   follows.
+ * @proto_version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ *   known format for this model.  The first byte of the report, ANDed with
+ *   mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ * @x_max: Largest possible X position value.
+ * @y_max: Largest possible Y position value.
+ * @x_bits: Number of X bits in the MT bitmap.
+ * @y_bits: Number of Y bits in the MT bitmap.
+ * @hw_init: Protocol-specific hardware init function.
+ * @process_packet: Protocol-specific function to process a report packet.
+ * @decode_fields: Protocol-specific function to read packet bitfields.
+ * @set_abs_params: Protocol-specific function to configure the input_dev.
+ * @prev_fin: Finger bit from previous packet.
+ * @multi_packet: Multi-packet data in progress.
+ * @multi_data: Saved multi-packet data.
+ * @x1: First X coordinate from last MT report.
+ * @x2: Second X coordinate from last MT report.
+ * @y1: First Y coordinate from last MT report.
+ * @y2: Second Y coordinate from last MT report.
+ * @fingers: Number of fingers from last MT report.
+ * @quirks: Bitmap of ALPS_QUIRK_*.
+ * @timer: Timer for flushing out the final report packet in the stream.
+ */
 struct alps_data {
-	struct input_dev *dev2;		/* Relative device */
+	struct input_dev *dev2;
-	char phys[32];			/* Phys */
+	char phys[32];
-	const struct alps_model_info *i;/* Info */
+
+	/* these are autodetected when the device is identified */
 	const struct alps_nibble_commands *nibble_commands;
-	int addr_command;		/* Command to set register address */
+	int addr_command;
-	int prev_fin;			/* Finger bit from previous packet */
+	unsigned char proto_version;
-	int multi_packet;		/* Multi-packet data in progress */
+	unsigned char byte0, mask0;
-	unsigned char multi_data[6];	/* Saved multi-packet data */
+	unsigned char flags;
-	int x1, x2, y1, y2;		/* Coordinates from last MT report */
+	int x_max;
-	int fingers;			/* Number of fingers from MT report */
+	int y_max;
+	int x_bits;
+	int y_bits;
+
+	int (*hw_init)(struct psmouse *psmouse);
+	void (*process_packet)(struct psmouse *psmouse);
+	void (*decode_fields)(struct alps_fields *f, unsigned char *p);
+	void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
+
+	int prev_fin;
+	int multi_packet;
+	unsigned char multi_data[6];
+	int x1, x2, y1, y2;
+	int fingers;
 	u8 quirks;
 	struct timer_list timer;
 };

drivers/input/mouse/cyapa.c

@@ -0,0 +1,973 @@
+/*
+ * Cypress APA trackpad with I2C interface
+ *
+ * Author: Dudley Du <dudl@cypress.com>
+ * Further cleanup and restructuring by:
+ *   Daniel Kurtz <djkurtz@chromium.org>
+ *   Benson Leung <bleung@chromium.org>
+ *
+ * Copyright (C) 2011-2012 Cypress Semiconductor, Inc.
+ * Copyright (C) 2011-2012 Google, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+/* APA trackpad firmware generation */
+#define CYAPA_GEN3   0x03   /* support MT-protocol B with tracking ID. */
+
+#define CYAPA_NAME   "Cypress APA Trackpad (cyapa)"
+
+/* commands for read/write registers of Cypress trackpad */
+#define CYAPA_CMD_SOFT_RESET       0x00
+#define CYAPA_CMD_POWER_MODE       0x01
+#define CYAPA_CMD_DEV_STATUS       0x02
+#define CYAPA_CMD_GROUP_DATA       0x03
+#define CYAPA_CMD_GROUP_CMD        0x04
+#define CYAPA_CMD_GROUP_QUERY      0x05
+#define CYAPA_CMD_BL_STATUS        0x06
+#define CYAPA_CMD_BL_HEAD          0x07
+#define CYAPA_CMD_BL_CMD           0x08
+#define CYAPA_CMD_BL_DATA          0x09
+#define CYAPA_CMD_BL_ALL           0x0a
+#define CYAPA_CMD_BLK_PRODUCT_ID   0x0b
+#define CYAPA_CMD_BLK_HEAD         0x0c
+
+/* report data start reg offset address. */
+#define DATA_REG_START_OFFSET  0x0000
+
+#define BL_HEAD_OFFSET 0x00
+#define BL_DATA_OFFSET 0x10
+
+/*
+ * Operational Device Status Register
+ *
+ * bit 7: Valid interrupt source
+ * bit 6 - 4: Reserved
+ * bit 3 - 2: Power status
+ * bit 1 - 0: Device status
+ */
+#define REG_OP_STATUS     0x00
+#define OP_STATUS_SRC     0x80
+#define OP_STATUS_POWER   0x0c
+#define OP_STATUS_DEV     0x03
+#define OP_STATUS_MASK (OP_STATUS_SRC | OP_STATUS_POWER | OP_STATUS_DEV)
+
+/*
+ * Operational Finger Count/Button Flags Register
+ *
+ * bit 7 - 4: Number of touched finger
+ * bit 3: Valid data
+ * bit 2: Middle Physical Button
+ * bit 1: Right Physical Button
+ * bit 0: Left physical Button
+ */
+#define REG_OP_DATA1       0x01
+#define OP_DATA_VALID      0x08
+#define OP_DATA_MIDDLE_BTN 0x04
+#define OP_DATA_RIGHT_BTN  0x02
+#define OP_DATA_LEFT_BTN   0x01
+#define OP_DATA_BTN_MASK (OP_DATA_MIDDLE_BTN | OP_DATA_RIGHT_BTN | \
+			  OP_DATA_LEFT_BTN)
+
+/*
+ * Bootloader Status Register
+ *
+ * bit 7: Busy
+ * bit 6 - 5: Reserved
+ * bit 4: Bootloader running
+ * bit 3 - 1: Reserved
+ * bit 0: Checksum valid
+ */
+#define REG_BL_STATUS        0x01
+#define BL_STATUS_BUSY       0x80
+#define BL_STATUS_RUNNING    0x10
+#define BL_STATUS_DATA_VALID 0x08
+#define BL_STATUS_CSUM_VALID 0x01
+
+/*
+ * Bootloader Error Register
+ *
+ * bit 7: Invalid
+ * bit 6: Invalid security key
+ * bit 5: Bootloading
+ * bit 4: Command checksum
+ * bit 3: Flash protection error
+ * bit 2: Flash checksum error
+ * bit 1 - 0: Reserved
+ */
+#define REG_BL_ERROR         0x02
+#define BL_ERROR_INVALID     0x80
+#define BL_ERROR_INVALID_KEY 0x40
+#define BL_ERROR_BOOTLOADING 0x20
+#define BL_ERROR_CMD_CSUM    0x10
+#define BL_ERROR_FLASH_PROT  0x08
+#define BL_ERROR_FLASH_CSUM  0x04
+
+#define BL_STATUS_SIZE  3  /* length of bootloader status registers */
+#define BLK_HEAD_BYTES 32
+
+#define PRODUCT_ID_SIZE  16
+#define QUERY_DATA_SIZE  27
+#define REG_PROTOCOL_GEN_QUERY_OFFSET  20
+
+#define REG_OFFSET_DATA_BASE     0x0000
+#define REG_OFFSET_COMMAND_BASE  0x0028
+#define REG_OFFSET_QUERY_BASE    0x002a
+
+#define CAPABILITY_LEFT_BTN_MASK	(0x01 << 3)
+#define CAPABILITY_RIGHT_BTN_MASK	(0x01 << 4)
+#define CAPABILITY_MIDDLE_BTN_MASK	(0x01 << 5)
+#define CAPABILITY_BTN_MASK  (CAPABILITY_LEFT_BTN_MASK | \
+			      CAPABILITY_RIGHT_BTN_MASK | \
+			      CAPABILITY_MIDDLE_BTN_MASK)
+
+#define CYAPA_OFFSET_SOFT_RESET  REG_OFFSET_COMMAND_BASE
+
+#define REG_OFFSET_POWER_MODE (REG_OFFSET_COMMAND_BASE + 1)
+
+#define PWR_MODE_MASK   0xfc
+#define PWR_MODE_FULL_ACTIVE (0x3f << 2)
+#define PWR_MODE_IDLE        (0x05 << 2) /* default sleep time is 50 ms. */
+#define PWR_MODE_OFF         (0x00 << 2)
+
+#define PWR_STATUS_MASK      0x0c
+#define PWR_STATUS_ACTIVE    (0x03 << 2)
+#define PWR_STATUS_IDLE      (0x02 << 2)
+#define PWR_STATUS_OFF       (0x00 << 2)
+
+/*
+ * CYAPA trackpad device states.
+ * Used in register 0x00, bit1-0, DeviceStatus field.
+ * Other values indicate device is in an abnormal state and must be reset.
+ */
+#define CYAPA_DEV_NORMAL  0x03
+#define CYAPA_DEV_BUSY    0x01
+
+enum cyapa_state {
+	CYAPA_STATE_OP,
+	CYAPA_STATE_BL_IDLE,
+	CYAPA_STATE_BL_ACTIVE,
+	CYAPA_STATE_BL_BUSY,
+	CYAPA_STATE_NO_DEVICE,
+};
+
+
+struct cyapa_touch {
+	/*
+	 * high bits or x/y position value
+	 * bit 7 - 4: high 4 bits of x position value
+	 * bit 3 - 0: high 4 bits of y position value
+	 */
+	u8 xy_hi;
+	u8 x_lo;  /* low 8 bits of x position value. */
+	u8 y_lo;  /* low 8 bits of y position value. */
+	u8 pressure;
+	/* id range is 1 - 15.  It is incremented with every new touch. */
+	u8 id;
+} __packed;
+
+/* The touch.id is used as the MT slot id, thus max MT slot is 15 */
+#define CYAPA_MAX_MT_SLOTS  15
+
+struct cyapa_reg_data {
+	/*
+	 * bit 0 - 1: device status
+	 * bit 3 - 2: power mode
+	 * bit 6 - 4: reserved
+	 * bit 7: interrupt valid bit
+	 */
+	u8 device_status;
+	/*
+	 * bit 7 - 4: number of fingers currently touching pad
+	 * bit 3: valid data check bit
+	 * bit 2: middle mechanism button state if exists
+	 * bit 1: right mechanism button state if exists
+	 * bit 0: left mechanism button state if exists
+	 */
+	u8 finger_btn;
+	/* CYAPA reports up to 5 touches per packet. */
+	struct cyapa_touch touches[5];
+} __packed;
+
+/* The main device structure */
+struct cyapa {
+	enum cyapa_state state;
+
+	struct i2c_client *client;
+	struct input_dev *input;
+	char phys[32];	/* device physical location */
+	int irq;
+	bool irq_wake;  /* irq wake is enabled */
+	bool smbus;
+
+	/* read from query data region. */
+	char product_id[16];
+	u8 btn_capability;
+	u8 gen;
+	int max_abs_x;
+	int max_abs_y;
+	int physical_size_x;
+	int physical_size_y;
+};
+
+static const u8 bl_deactivate[] = { 0x00, 0xff, 0x3b, 0x00, 0x01, 0x02, 0x03,
+		0x04, 0x05, 0x06, 0x07 };
+static const u8 bl_exit[] = { 0x00, 0xff, 0xa5, 0x00, 0x01, 0x02, 0x03, 0x04,
+		0x05, 0x06, 0x07 };
+
+struct cyapa_cmd_len {
+	u8 cmd;
+	u8 len;
+};
+
+#define CYAPA_ADAPTER_FUNC_NONE   0
+#define CYAPA_ADAPTER_FUNC_I2C    1
+#define CYAPA_ADAPTER_FUNC_SMBUS  2
+#define CYAPA_ADAPTER_FUNC_BOTH   3
+
+/*
+ * macros for SMBus communication
+ */
+#define SMBUS_READ   0x01
+#define SMBUS_WRITE 0x00
+#define SMBUS_ENCODE_IDX(cmd, idx) ((cmd) | (((idx) & 0x03) << 1))
+#define SMBUS_ENCODE_RW(cmd, rw) ((cmd) | ((rw) & 0x01))
+#define SMBUS_BYTE_BLOCK_CMD_MASK 0x80
+#define SMBUS_GROUP_BLOCK_CMD_MASK 0x40
+
+ /* for byte read/write command */
+#define CMD_RESET 0
+#define CMD_POWER_MODE 1
+#define CMD_DEV_STATUS 2
+#define SMBUS_BYTE_CMD(cmd) (((cmd) & 0x3f) << 1)
+#define CYAPA_SMBUS_RESET SMBUS_BYTE_CMD(CMD_RESET)
+#define CYAPA_SMBUS_POWER_MODE SMBUS_BYTE_CMD(CMD_POWER_MODE)
+#define CYAPA_SMBUS_DEV_STATUS SMBUS_BYTE_CMD(CMD_DEV_STATUS)
+
+ /* for group registers read/write command */
+#define REG_GROUP_DATA 0
+#define REG_GROUP_CMD 2
+#define REG_GROUP_QUERY 3
+#define SMBUS_GROUP_CMD(grp) (0x80 | (((grp) & 0x07) << 3))
+#define CYAPA_SMBUS_GROUP_DATA SMBUS_GROUP_CMD(REG_GROUP_DATA)
+#define CYAPA_SMBUS_GROUP_CMD SMBUS_GROUP_CMD(REG_GROUP_CMD)
+#define CYAPA_SMBUS_GROUP_QUERY SMBUS_GROUP_CMD(REG_GROUP_QUERY)
+
+ /* for register block read/write command */
+#define CMD_BL_STATUS 0
+#define CMD_BL_HEAD 1
+#define CMD_BL_CMD 2
+#define CMD_BL_DATA 3
+#define CMD_BL_ALL 4
+#define CMD_BLK_PRODUCT_ID 5
+#define CMD_BLK_HEAD 6
+#define SMBUS_BLOCK_CMD(cmd) (0xc0 | (((cmd) & 0x1f) << 1))
+
+/* register block read/write command in bootloader mode */
+#define CYAPA_SMBUS_BL_STATUS SMBUS_BLOCK_CMD(CMD_BL_STATUS)
+#define CYAPA_SMBUS_BL_HEAD SMBUS_BLOCK_CMD(CMD_BL_HEAD)
+#define CYAPA_SMBUS_BL_CMD SMBUS_BLOCK_CMD(CMD_BL_CMD)
+#define CYAPA_SMBUS_BL_DATA SMBUS_BLOCK_CMD(CMD_BL_DATA)
+#define CYAPA_SMBUS_BL_ALL SMBUS_BLOCK_CMD(CMD_BL_ALL)
+
+/* register block read/write command in operational mode */
+#define CYAPA_SMBUS_BLK_PRODUCT_ID SMBUS_BLOCK_CMD(CMD_BLK_PRODUCT_ID)
+#define CYAPA_SMBUS_BLK_HEAD SMBUS_BLOCK_CMD(CMD_BLK_HEAD)
+
+static const struct cyapa_cmd_len cyapa_i2c_cmds[] = {
+	{ CYAPA_OFFSET_SOFT_RESET, 1 },
+	{ REG_OFFSET_COMMAND_BASE + 1, 1 },
+	{ REG_OFFSET_DATA_BASE, 1 },
+	{ REG_OFFSET_DATA_BASE, sizeof(struct cyapa_reg_data) },
+	{ REG_OFFSET_COMMAND_BASE, 0 },
+	{ REG_OFFSET_QUERY_BASE, QUERY_DATA_SIZE },
+	{ BL_HEAD_OFFSET, 3 },
+	{ BL_HEAD_OFFSET, 16 },
+	{ BL_HEAD_OFFSET, 16 },
+	{ BL_DATA_OFFSET, 16 },
+	{ BL_HEAD_OFFSET, 32 },
+	{ REG_OFFSET_QUERY_BASE, PRODUCT_ID_SIZE },
+	{ REG_OFFSET_DATA_BASE, 32 }
+};
+
+static const struct cyapa_cmd_len cyapa_smbus_cmds[] = {
+	{ CYAPA_SMBUS_RESET, 1 },
+	{ CYAPA_SMBUS_POWER_MODE, 1 },
+	{ CYAPA_SMBUS_DEV_STATUS, 1 },
+	{ CYAPA_SMBUS_GROUP_DATA, sizeof(struct cyapa_reg_data) },
+	{ CYAPA_SMBUS_GROUP_CMD, 2 },
+	{ CYAPA_SMBUS_GROUP_QUERY, QUERY_DATA_SIZE },
+	{ CYAPA_SMBUS_BL_STATUS, 3 },
+	{ CYAPA_SMBUS_BL_HEAD, 16 },
+	{ CYAPA_SMBUS_BL_CMD, 16 },
+	{ CYAPA_SMBUS_BL_DATA, 16 },
+	{ CYAPA_SMBUS_BL_ALL, 32 },
+	{ CYAPA_SMBUS_BLK_PRODUCT_ID, PRODUCT_ID_SIZE },
+	{ CYAPA_SMBUS_BLK_HEAD, 16 },
+};
+
+static ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len,
+					u8 *values)
+{
+	return i2c_smbus_read_i2c_block_data(cyapa->client, reg, len, values);
+}
+
+static ssize_t cyapa_i2c_reg_write_block(struct cyapa *cyapa, u8 reg,
+					 size_t len, const u8 *values)
+{
+	return i2c_smbus_write_i2c_block_data(cyapa->client, reg, len, values);
+}
+
+/*
+ * cyapa_smbus_read_block - perform smbus block read command
+ * @cyapa  - private data structure of the driver
+ * @cmd    - the properly encoded smbus command
+ * @len    - expected length of smbus command result
+ * @values - buffer to store smbus command result
+ *
+ * Returns negative errno, else the number of bytes written.
+ *
+ * Note:
+ * In trackpad device, the memory block allocated for I2C register map
+ * is 256 bytes, so the max read block for I2C bus is 256 bytes.
+ */
+static ssize_t cyapa_smbus_read_block(struct cyapa *cyapa, u8 cmd, size_t len,
+				      u8 *values)
+{
+	ssize_t ret;
+	u8 index;
+	u8 smbus_cmd;
+	u8 *buf;
+	struct i2c_client *client = cyapa->client;
+
+	if (!(SMBUS_BYTE_BLOCK_CMD_MASK & cmd))
+		return -EINVAL;
+
+	if (SMBUS_GROUP_BLOCK_CMD_MASK & cmd) {
+		/* read specific block registers command. */
+		smbus_cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ);
+		ret = i2c_smbus_read_block_data(client, smbus_cmd, values);
+		goto out;
+	}
+
+	ret = 0;
+	for (index = 0; index * I2C_SMBUS_BLOCK_MAX < len; index++) {
+		smbus_cmd = SMBUS_ENCODE_IDX(cmd, index);
+		smbus_cmd = SMBUS_ENCODE_RW(smbus_cmd, SMBUS_READ);
+		buf = values + I2C_SMBUS_BLOCK_MAX * index;
+		ret = i2c_smbus_read_block_data(client, smbus_cmd, buf);
+		if (ret < 0)
+			goto out;
+	}
+
+out:
+	return ret > 0 ? len : ret;
+}
+
+static s32 cyapa_read_byte(struct cyapa *cyapa, u8 cmd_idx)
+{
+	u8 cmd;
+
+	if (cyapa->smbus) {
+		cmd = cyapa_smbus_cmds[cmd_idx].cmd;
+		cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ);
+	} else {
+		cmd = cyapa_i2c_cmds[cmd_idx].cmd;
+	}
+	return i2c_smbus_read_byte_data(cyapa->client, cmd);
+}
+
+static s32 cyapa_write_byte(struct cyapa *cyapa, u8 cmd_idx, u8 value)
+{
+	u8 cmd;
+
+	if (cyapa->smbus) {
+		cmd = cyapa_smbus_cmds[cmd_idx].cmd;
+		cmd = SMBUS_ENCODE_RW(cmd, SMBUS_WRITE);
+	} else {
+		cmd = cyapa_i2c_cmds[cmd_idx].cmd;
+	}
+	return i2c_smbus_write_byte_data(cyapa->client, cmd, value);
+}
+
+static ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values)
+{
+	u8 cmd;
+	size_t len;
+
+	if (cyapa->smbus) {
+		cmd = cyapa_smbus_cmds[cmd_idx].cmd;
+		len = cyapa_smbus_cmds[cmd_idx].len;
+		return cyapa_smbus_read_block(cyapa, cmd, len, values);
+	} else {
+		cmd = cyapa_i2c_cmds[cmd_idx].cmd;
+		len = cyapa_i2c_cmds[cmd_idx].len;
+		return cyapa_i2c_reg_read_block(cyapa, cmd, len, values);
+	}
+}
+
+/*
+ * Query device for its current operating state.
+ *
+ */
+static int cyapa_get_state(struct cyapa *cyapa)
+{
+	int ret;
+	u8 status[BL_STATUS_SIZE];
+
+	cyapa->state = CYAPA_STATE_NO_DEVICE;
+
+	/*
+	 * Get trackpad status by reading 3 registers starting from 0.
+	 * If the device is in the bootloader, this will be BL_HEAD.
+	 * If the device is in operation mode, this will be the DATA regs.
+	 *
+	 */
+	ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE,
+				       status);
+
+	/*
+	 * On smbus systems in OP mode, the i2c_reg_read will fail with
+	 * -ETIMEDOUT.  In this case, try again using the smbus equivalent
+	 * command.  This should return a BL_HEAD indicating CYAPA_STATE_OP.
+	 */
+	if (cyapa->smbus && (ret == -ETIMEDOUT || ret == -ENXIO))
+		ret = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status);
+
+	if (ret != BL_STATUS_SIZE)
+		goto error;
+
+	if ((status[REG_OP_STATUS] & OP_STATUS_SRC) == OP_STATUS_SRC) {
+		switch (status[REG_OP_STATUS] & OP_STATUS_DEV) {
+		case CYAPA_DEV_NORMAL:
+		case CYAPA_DEV_BUSY:
+			cyapa->state = CYAPA_STATE_OP;
+			break;
+		default:
+			ret = -EAGAIN;
+			goto error;
+		}
+	} else {
+		if (status[REG_BL_STATUS] & BL_STATUS_BUSY)
+			cyapa->state = CYAPA_STATE_BL_BUSY;
+		else if (status[REG_BL_ERROR] & BL_ERROR_BOOTLOADING)
+			cyapa->state = CYAPA_STATE_BL_ACTIVE;
+		else
+			cyapa->state = CYAPA_STATE_BL_IDLE;
+	}
+
+	return 0;
+error:
+	return (ret < 0) ? ret : -EAGAIN;
+}
+
+/*
+ * Poll device for its status in a loop, waiting up to timeout for a response.
+ *
+ * When the device switches state, it usually takes ~300 ms.
+ * However, when running a new firmware image, the device must calibrate its
+ * sensors, which can take as long as 2 seconds.
+ *
+ * Note: The timeout has granularity of the polling rate, which is 100 ms.
+ *
+ * Returns:
+ *   0 when the device eventually responds with a valid non-busy state.
+ *   -ETIMEDOUT if device never responds (too many -EAGAIN)
+ *   < 0    other errors
+ */
+static int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout)
+{
+	int ret;
+	int tries = timeout / 100;
+
+	ret = cyapa_get_state(cyapa);
+	while ((ret || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) {
+		msleep(100);
+		ret = cyapa_get_state(cyapa);
+	}
+	return (ret == -EAGAIN || ret == -ETIMEDOUT) ? -ETIMEDOUT : ret;
+}
+
+static int cyapa_bl_deactivate(struct cyapa *cyapa)
+{
+	int ret;
+
+	ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate),
+					bl_deactivate);
+	if (ret < 0)
+		return ret;
+
+	/* wait for bootloader to switch to idle state; should take < 100ms */
+	msleep(100);
+	ret = cyapa_poll_state(cyapa, 500);
+	if (ret < 0)
+		return ret;
+	if (cyapa->state != CYAPA_STATE_BL_IDLE)
+		return -EAGAIN;
+	return 0;
+}
+
+/*
+ * Exit bootloader
+ *
+ * Send bl_exit command, then wait 50 - 100 ms to let device transition to
+ * operational mode.  If this is the first time the device's firmware is
+ * running, it can take up to 2 seconds to calibrate its sensors.  So, poll
+ * the device's new state for up to 2 seconds.
+ *
+ * Returns:
+ *   -EIO    failure while reading from device
+ *   -EAGAIN device is stuck in bootloader, b/c it has invalid firmware
+ *   0       device is supported and in operational mode
+ */
+static int cyapa_bl_exit(struct cyapa *cyapa)
+{
+	int ret;
+
+	ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Wait for bootloader to exit, and operation mode to start.
+	 * Normally, this takes at least 50 ms.
+	 */
+	usleep_range(50000, 100000);
+	/*
+	 * In addition, when a device boots for the first time after being
+	 * updated to new firmware, it must first calibrate its sensors, which
+	 * can take up to an additional 2 seconds.
+	 */
+	ret = cyapa_poll_state(cyapa, 2000);
+	if (ret < 0)
+		return ret;
+	if (cyapa->state != CYAPA_STATE_OP)
+		return -EAGAIN;
+
+	return 0;
+}
+
+/*
+ * Set device power mode
+ *
+ */
+static int cyapa_set_power_mode(struct cyapa *cyapa, u8 power_mode)
+{
+	struct device *dev = &cyapa->client->dev;
+	int ret;
+	u8 power;
+
+	if (cyapa->state != CYAPA_STATE_OP)
+		return 0;
+
+	ret = cyapa_read_byte(cyapa, CYAPA_CMD_POWER_MODE);
+	if (ret < 0)
+		return ret;
+
+	power = ret & ~PWR_MODE_MASK;
+	power |= power_mode & PWR_MODE_MASK;
+	ret = cyapa_write_byte(cyapa, CYAPA_CMD_POWER_MODE, power);
+	if (ret < 0)
+		dev_err(dev, "failed to set power_mode 0x%02x err = %d\n",
+			power_mode, ret);
+	return ret;
+}
+
+static int cyapa_get_query_data(struct cyapa *cyapa)
+{
+	u8 query_data[QUERY_DATA_SIZE];
+	int ret;
+
+	if (cyapa->state != CYAPA_STATE_OP)
+		return -EBUSY;
+
+	ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_QUERY, query_data);
+	if (ret < 0)
+		return ret;
+	if (ret != QUERY_DATA_SIZE)
+		return -EIO;
+
+	memcpy(&cyapa->product_id[0], &query_data[0], 5);
+	cyapa->product_id[5] = '-';
+	memcpy(&cyapa->product_id[6], &query_data[5], 6);
+	cyapa->product_id[12] = '-';
+	memcpy(&cyapa->product_id[13], &query_data[11], 2);
+	cyapa->product_id[15] = '\0';
+
+	cyapa->btn_capability = query_data[19] & CAPABILITY_BTN_MASK;
+
+	cyapa->gen = query_data[20] & 0x0f;
+
+	cyapa->max_abs_x = ((query_data[21] & 0xf0) << 4) | query_data[22];
+	cyapa->max_abs_y = ((query_data[21] & 0x0f) << 8) | query_data[23];
+
+	cyapa->physical_size_x =
+		((query_data[24] & 0xf0) << 4) | query_data[25];
+	cyapa->physical_size_y =
+		((query_data[24] & 0x0f) << 8) | query_data[26];
+
+	return 0;
+}
+
+/*
+ * Check if device is operational.
+ *
+ * An operational device is responding, has exited bootloader, and has
+ * firmware supported by this driver.
+ *
+ * Returns:
+ *   -EBUSY  no device or in bootloader
+ *   -EIO    failure while reading from device
+ *   -EAGAIN device is still in bootloader
+ *           if ->state = CYAPA_STATE_BL_IDLE, device has invalid firmware
+ *   -EINVAL device is in operational mode, but not supported by this driver
+ *   0       device is supported
+ */
+static int cyapa_check_is_operational(struct cyapa *cyapa)
+{
+	struct device *dev = &cyapa->client->dev;
+	static const char unique_str[] = "CYTRA";
+	int ret;
+
+	ret = cyapa_poll_state(cyapa, 2000);
+	if (ret < 0)
+		return ret;
+	switch (cyapa->state) {
+	case CYAPA_STATE_BL_ACTIVE:
+		ret = cyapa_bl_deactivate(cyapa);
+		if (ret)
+			return ret;
+
+	/* Fallthrough state */
+	case CYAPA_STATE_BL_IDLE:
+		ret = cyapa_bl_exit(cyapa);
+		if (ret)
+			return ret;
+
+	/* Fallthrough state */
+	case CYAPA_STATE_OP:
+		ret = cyapa_get_query_data(cyapa);
+		if (ret < 0)
+			return ret;
+
+		/* only support firmware protocol gen3 */
+		if (cyapa->gen != CYAPA_GEN3) {
+			dev_err(dev, "unsupported protocol version (%d)",
+				cyapa->gen);
+			return -EINVAL;
+		}
+
+		/* only support product ID starting with CYTRA */
+		if (memcmp(cyapa->product_id, unique_str,
+			   sizeof(unique_str) - 1) != 0) {
+			dev_err(dev, "unsupported product ID (%s)\n",
+				cyapa->product_id);
+			return -EINVAL;
+		}
+		return 0;
+
+	default:
+		return -EIO;
+	}
+	return 0;
+}
+
+static irqreturn_t cyapa_irq(int irq, void *dev_id)
+{
+	struct cyapa *cyapa = dev_id;
+	struct device *dev = &cyapa->client->dev;
+	struct input_dev *input = cyapa->input;
+	struct cyapa_reg_data data;
+	int i;
+	int ret;
+	int num_fingers;
+
+	if (device_may_wakeup(dev))
+		pm_wakeup_event(dev, 0);
+
+	ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data);
+	if (ret != sizeof(data))
+		goto out;
+
+	if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC ||
+	    (data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL ||
+	    (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) {
+		goto out;
+	}
+
+	num_fingers = (data.finger_btn >> 4) & 0x0f;
+	for (i = 0; i < num_fingers; i++) {
+		const struct cyapa_touch *touch = &data.touches[i];
+		/* Note: touch->id range is 1 to 15; slots are 0 to 14. */
+		int slot = touch->id - 1;
+
+		input_mt_slot(input, slot);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+		input_report_abs(input, ABS_MT_POSITION_X,
+				 ((touch->xy_hi & 0xf0) << 4) | touch->x_lo);
+		input_report_abs(input, ABS_MT_POSITION_Y,
+				 ((touch->xy_hi & 0x0f) << 8) | touch->y_lo);
+		input_report_abs(input, ABS_MT_PRESSURE, touch->pressure);
+	}
+
+	input_mt_sync_frame(input);
+
+	if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK)
+		input_report_key(input, BTN_LEFT,
+				 data.finger_btn & OP_DATA_LEFT_BTN);
+
+	if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK)
+		input_report_key(input, BTN_MIDDLE,
+				 data.finger_btn & OP_DATA_MIDDLE_BTN);
+
+	if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK)
+		input_report_key(input, BTN_RIGHT,
+				 data.finger_btn & OP_DATA_RIGHT_BTN);
+
+	input_sync(input);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static u8 cyapa_check_adapter_functionality(struct i2c_client *client)
+{
+	u8 ret = CYAPA_ADAPTER_FUNC_NONE;
+
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		ret |= CYAPA_ADAPTER_FUNC_I2C;
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_BLOCK_DATA |
+				     I2C_FUNC_SMBUS_I2C_BLOCK))
+		ret |= CYAPA_ADAPTER_FUNC_SMBUS;
+	return ret;
+}
+
+static int cyapa_create_input_dev(struct cyapa *cyapa)
+{
+	struct device *dev = &cyapa->client->dev;
+	int ret;
+	struct input_dev *input;
+
+	if (!cyapa->physical_size_x || !cyapa->physical_size_y)
+		return -EINVAL;
+
+	input = cyapa->input = input_allocate_device();
+	if (!input) {
+		dev_err(dev, "allocate memory for input device failed\n");
+		return -ENOMEM;
+	}
+
+	input->name = CYAPA_NAME;
+	input->phys = cyapa->phys;
+	input->id.bustype = BUS_I2C;
+	input->id.version = 1;
+	input->id.product = 0;  /* means any product in eventcomm. */
+	input->dev.parent = &cyapa->client->dev;
+
+	input_set_drvdata(input, cyapa);
+
+	__set_bit(EV_ABS, input->evbit);
+
+	/* finger position */
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, cyapa->max_abs_x, 0,
+			     0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cyapa->max_abs_y, 0,
+			     0);
+	input_set_abs_params(input, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
+	input_abs_set_res(input, ABS_MT_POSITION_X,
+			  cyapa->max_abs_x / cyapa->physical_size_x);
+	input_abs_set_res(input, ABS_MT_POSITION_Y,
+			  cyapa->max_abs_y / cyapa->physical_size_y);
+
+	if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK)
+		__set_bit(BTN_LEFT, input->keybit);
+	if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK)
+		__set_bit(BTN_MIDDLE, input->keybit);
+	if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK)
+		__set_bit(BTN_RIGHT, input->keybit);
+
+	if (cyapa->btn_capability == CAPABILITY_LEFT_BTN_MASK)
+		__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+
+	/* handle pointer emulation and unused slots in core */
+	ret = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS,
+				  INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED);
+	if (ret) {
+		dev_err(dev, "allocate memory for MT slots failed, %d\n", ret);
+		goto err_free_device;
+	}
+
+	/* Register the device in input subsystem */
+	ret = input_register_device(input);
+	if (ret) {
+		dev_err(dev, "input device register failed, %d\n", ret);
+		goto err_free_device;
+	}
+	return 0;
+
+err_free_device:
+	input_free_device(input);
+	cyapa->input = NULL;
+	return ret;
+}
+
+static int cyapa_probe(struct i2c_client *client,
+		       const struct i2c_device_id *dev_id)
+{
+	int ret;
+	u8 adapter_func;
+	struct cyapa *cyapa;
+	struct device *dev = &client->dev;
+
+	adapter_func = cyapa_check_adapter_functionality(client);
+	if (adapter_func == CYAPA_ADAPTER_FUNC_NONE) {
+		dev_err(dev, "not a supported I2C/SMBus adapter\n");
+		return -EIO;
+	}
+
+	cyapa = kzalloc(sizeof(struct cyapa), GFP_KERNEL);
+	if (!cyapa) {
+		dev_err(dev, "allocate memory for cyapa failed\n");
+		return -ENOMEM;
+	}
+
+	cyapa->gen = CYAPA_GEN3;
+	cyapa->client = client;
+	i2c_set_clientdata(client, cyapa);
+	sprintf(cyapa->phys, "i2c-%d-%04x/input0", client->adapter->nr,
+		client->addr);
+
+	/* i2c isn't supported, use smbus */
+	if (adapter_func == CYAPA_ADAPTER_FUNC_SMBUS)
+		cyapa->smbus = true;
+	cyapa->state = CYAPA_STATE_NO_DEVICE;
+	ret = cyapa_check_is_operational(cyapa);
+	if (ret) {
+		dev_err(dev, "device not operational, %d\n", ret);
+		goto err_mem_free;
+	}
+
+	ret = cyapa_create_input_dev(cyapa);
+	if (ret) {
+		dev_err(dev, "create input_dev instance failed, %d\n", ret);
+		goto err_mem_free;
+	}
+
+	ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
+	if (ret) {
+		dev_err(dev, "set active power failed, %d\n", ret);
+		goto err_unregister_device;
+	}
+
+	cyapa->irq = client->irq;
+	ret = request_threaded_irq(cyapa->irq,
+				   NULL,
+				   cyapa_irq,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				   "cyapa",
+				   cyapa);
+	if (ret) {
+		dev_err(dev, "IRQ request failed: %d\n, ", ret);
+		goto err_unregister_device;
+	}
+
+	return 0;
+
+err_unregister_device:
+	input_unregister_device(cyapa->input);
+err_mem_free:
+	kfree(cyapa);
+
+	return ret;
+}
+
+static int cyapa_remove(struct i2c_client *client)
+{
+	struct cyapa *cyapa = i2c_get_clientdata(client);
+
+	free_irq(cyapa->irq, cyapa);
+	input_unregister_device(cyapa->input);
+	cyapa_set_power_mode(cyapa, PWR_MODE_OFF);
+	kfree(cyapa);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cyapa_suspend(struct device *dev)
+{
+	int ret;
+	u8 power_mode;
+	struct cyapa *cyapa = dev_get_drvdata(dev);
+
+	disable_irq(cyapa->irq);
+
+	/*
+	 * Set trackpad device to idle mode if wakeup is allowed,
+	 * otherwise turn off.
+	 */
+	power_mode = device_may_wakeup(dev) ? PWR_MODE_IDLE
+					    : PWR_MODE_OFF;
+	ret = cyapa_set_power_mode(cyapa, power_mode);
+	if (ret < 0)
+		dev_err(dev, "set power mode failed, %d\n", ret);
+
+	if (device_may_wakeup(dev))
+		cyapa->irq_wake = (enable_irq_wake(cyapa->irq) == 0);
+	return 0;
+}
+
+static int cyapa_resume(struct device *dev)
+{
+	int ret;
+	struct cyapa *cyapa = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev) && cyapa->irq_wake)
+		disable_irq_wake(cyapa->irq);
+
+	ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
+	if (ret)
+		dev_warn(dev, "resume active power failed, %d\n", ret);
+
+	enable_irq(cyapa->irq);
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(cyapa_pm_ops, cyapa_suspend, cyapa_resume);
+
+static const struct i2c_device_id cyapa_id_table[] = {
+	{ "cyapa", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, cyapa_id_table);
+
+static struct i2c_driver cyapa_driver = {
+	.driver = {
+		.name = "cyapa",
+		.owner = THIS_MODULE,
+		.pm = &cyapa_pm_ops,
+	},
+
+	.probe = cyapa_probe,
+	.remove = cyapa_remove,
+	.id_table = cyapa_id_table,
+};
+
+module_i2c_driver(cyapa_driver);
+
+MODULE_DESCRIPTION("Cypress APA I2C Trackpad Driver");
+MODULE_AUTHOR("Dudley Du <dudl@cypress.com>");
+MODULE_LICENSE("GPL");

drivers/input/mouse/cypress_ps2.c

@@ -0,0 +1,725 @@
+/*
+ * Cypress Trackpad PS/2 mouse driver
+ *
+ * Copyright (c) 2012 Cypress Semiconductor Corporation.
+ *
+ * Author:
+ *   Dudley Du <dudl@cypress.com>
+ *
+ * Additional contributors include:
+ *   Kamal Mostafa <kamal@canonical.com>
+ *   Kyle Fazzari <git@status.e4ward.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/serio.h>
+#include <linux/libps2.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+
+#include "cypress_ps2.h"
+
+#undef CYTP_DEBUG_VERBOSE  /* define this and DEBUG for more verbose dump */
+
+static void cypress_set_packet_size(struct psmouse *psmouse, unsigned int n)
+{
+	struct cytp_data *cytp = psmouse->private;
+	cytp->pkt_size = n;
+}
+
+static const unsigned char cytp_rate[] = {10, 20, 40, 60, 100, 200};
+static const unsigned char cytp_resolution[] = {0x00, 0x01, 0x02, 0x03};
+
+static int cypress_ps2_sendbyte(struct psmouse *psmouse, int value)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+	if (ps2_sendbyte(ps2dev, value & 0xff, CYTP_CMD_TIMEOUT) < 0) {
+		psmouse_dbg(psmouse,
+				"sending command 0x%02x failed, resp 0x%02x\n",
+				value & 0xff, ps2dev->nak);
+		if (ps2dev->nak == CYTP_PS2_RETRY)
+			return CYTP_PS2_RETRY;
+		else
+			return CYTP_PS2_ERROR;
+	}
+
+#ifdef CYTP_DEBUG_VERBOSE
+	psmouse_dbg(psmouse, "sending command 0x%02x succeeded, resp 0xfa\n",
+			value & 0xff);
+#endif
+
+	return 0;
+}
+
+static int cypress_ps2_ext_cmd(struct psmouse *psmouse, unsigned short cmd,
+			       unsigned char data)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	int tries = CYTP_PS2_CMD_TRIES;
+	int rc;
+
+	ps2_begin_command(ps2dev);
+
+	do {
+		/*
+		 * Send extension command byte (0xE8 or 0xF3).
+		 * If sending the command fails, send recovery command
+		 * to make the device return to the ready state.
+		 */
+		rc = cypress_ps2_sendbyte(psmouse, cmd & 0xff);
+		if (rc == CYTP_PS2_RETRY) {
+			rc = cypress_ps2_sendbyte(psmouse, 0x00);
+			if (rc == CYTP_PS2_RETRY)
+				rc = cypress_ps2_sendbyte(psmouse, 0x0a);
+		}
+		if (rc == CYTP_PS2_ERROR)
+			continue;
+
+		rc = cypress_ps2_sendbyte(psmouse, data);
+		if (rc == CYTP_PS2_RETRY)
+			rc = cypress_ps2_sendbyte(psmouse, data);
+		if (rc == CYTP_PS2_ERROR)
+			continue;
+		else
+			break;
+	} while (--tries > 0);
+
+	ps2_end_command(ps2dev);
+
+	return rc;
+}
+
+static int cypress_ps2_read_cmd_status(struct psmouse *psmouse,
+				       unsigned char cmd,
+				       unsigned char *param)
+{
+	int rc;
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	enum psmouse_state old_state;
+	int pktsize;
+
+	ps2_begin_command(&psmouse->ps2dev);
+
+	old_state = psmouse->state;
+	psmouse->state = PSMOUSE_CMD_MODE;
+	psmouse->pktcnt = 0;
+
+	pktsize = (cmd == CYTP_CMD_READ_TP_METRICS) ? 8 : 3;
+	memset(param, 0, pktsize);
+
+	rc = cypress_ps2_sendbyte(psmouse, 0xe9);
+	if (rc < 0)
+		goto out;
+
+	wait_event_timeout(ps2dev->wait,
+			(psmouse->pktcnt >= pktsize),
+			msecs_to_jiffies(CYTP_CMD_TIMEOUT));
+
+	memcpy(param, psmouse->packet, pktsize);
+
+	psmouse_dbg(psmouse, "Command 0x%02x response data (0x): %*ph\n",
+			cmd, pktsize, param);
+
+out:
+	psmouse->state = old_state;
+	psmouse->pktcnt = 0;
+
+	ps2_end_command(&psmouse->ps2dev);
+
+	return rc;
+}
+
+static bool cypress_verify_cmd_state(struct psmouse *psmouse,
+				     unsigned char cmd, unsigned char *param)
+{
+	bool rate_match = false;
+	bool resolution_match = false;
+	int i;
+
+	/* callers will do further checking. */
+	if (cmd == CYTP_CMD_READ_CYPRESS_ID ||
+	    cmd == CYTP_CMD_STANDARD_MODE ||
+	    cmd == CYTP_CMD_READ_TP_METRICS)
+		return true;
+
+	if ((~param[0] & DFLT_RESP_BITS_VALID) == DFLT_RESP_BITS_VALID &&
+	    (param[0] & DFLT_RESP_BIT_MODE) == DFLT_RESP_STREAM_MODE) {
+		for (i = 0; i < sizeof(cytp_resolution); i++)
+			if (cytp_resolution[i] == param[1])
+				resolution_match = true;
+
+		for (i = 0; i < sizeof(cytp_rate); i++)
+			if (cytp_rate[i] == param[2])
+				rate_match = true;
+
+		if (resolution_match && rate_match)
+			return true;
+	}
+
+	psmouse_dbg(psmouse, "verify cmd state failed.\n");
+	return false;
+}
+
+static int cypress_send_ext_cmd(struct psmouse *psmouse, unsigned char cmd,
+				unsigned char *param)
+{
+	int tries = CYTP_PS2_CMD_TRIES;
+	int rc;
+
+	psmouse_dbg(psmouse, "send extension cmd 0x%02x, [%d %d %d %d]\n",
+		 cmd, DECODE_CMD_AA(cmd), DECODE_CMD_BB(cmd),
+		 DECODE_CMD_CC(cmd), DECODE_CMD_DD(cmd));
+
+	do {
+		cypress_ps2_ext_cmd(psmouse,
+				    PSMOUSE_CMD_SETRES, DECODE_CMD_DD(cmd));
+		cypress_ps2_ext_cmd(psmouse,
+				    PSMOUSE_CMD_SETRES, DECODE_CMD_CC(cmd));
+		cypress_ps2_ext_cmd(psmouse,
+				    PSMOUSE_CMD_SETRES, DECODE_CMD_BB(cmd));
+		cypress_ps2_ext_cmd(psmouse,
+				    PSMOUSE_CMD_SETRES, DECODE_CMD_AA(cmd));
+
+		rc = cypress_ps2_read_cmd_status(psmouse, cmd, param);
+		if (rc)
+			continue;
+
+		if (cypress_verify_cmd_state(psmouse, cmd, param))
+			return 0;
+
+	} while (--tries > 0);
+
+	return -EIO;
+}
+
+int cypress_detect(struct psmouse *psmouse, bool set_properties)
+{
+	unsigned char param[3];
+
+	if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_CYPRESS_ID, param))
+		return -ENODEV;
+
+	/* Check for Cypress Trackpad signature bytes: 0x33 0xCC */
+	if (param[0] != 0x33 || param[1] != 0xCC)
+		return -ENODEV;
+
+	if (set_properties) {
+		psmouse->vendor = "Cypress";
+		psmouse->name = "Trackpad";
+	}
+
+	return 0;
+}
+
+static int cypress_read_fw_version(struct psmouse *psmouse)
+{
+	struct cytp_data *cytp = psmouse->private;
+	unsigned char param[3];
+
+	if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_CYPRESS_ID, param))
+		return -ENODEV;
+
+	/* Check for Cypress Trackpad signature bytes: 0x33 0xCC */
+	if (param[0] != 0x33 || param[1] != 0xCC)
+		return -ENODEV;
+
+	cytp->fw_version = param[2] & FW_VERSION_MASX;
+	cytp->tp_metrics_supported = (param[2] & TP_METRICS_MASK) ? 1 : 0;
+
+	psmouse_dbg(psmouse, "cytp->fw_version = %d\n", cytp->fw_version);
+	psmouse_dbg(psmouse, "cytp->tp_metrics_supported = %d\n",
+		 cytp->tp_metrics_supported);
+
+	return 0;
+}
+
+static int cypress_read_tp_metrics(struct psmouse *psmouse)
+{
+	struct cytp_data *cytp = psmouse->private;
+	unsigned char param[8];
+
+	/* set default values for tp metrics. */
+	cytp->tp_width = CYTP_DEFAULT_WIDTH;
+	cytp->tp_high = CYTP_DEFAULT_HIGH;
+	cytp->tp_max_abs_x = CYTP_ABS_MAX_X;
+	cytp->tp_max_abs_y = CYTP_ABS_MAX_Y;
+	cytp->tp_min_pressure = CYTP_MIN_PRESSURE;
+	cytp->tp_max_pressure = CYTP_MAX_PRESSURE;
+	cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width;
+	cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high;
+
+	memset(param, 0, sizeof(param));
+	if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_TP_METRICS, param) == 0) {
+		/* Update trackpad parameters. */
+		cytp->tp_max_abs_x = (param[1] << 8) | param[0];
+		cytp->tp_max_abs_y = (param[3] << 8) | param[2];
+		cytp->tp_min_pressure = param[4];
+		cytp->tp_max_pressure = param[5];
+	}
+
+	if (!cytp->tp_max_pressure ||
+	    cytp->tp_max_pressure < cytp->tp_min_pressure ||
+	    !cytp->tp_width || !cytp->tp_high ||
+	    !cytp->tp_max_abs_x ||
+	    cytp->tp_max_abs_x < cytp->tp_width ||
+	    !cytp->tp_max_abs_y ||
+	    cytp->tp_max_abs_y < cytp->tp_high)
+		return -EINVAL;
+
+	cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width;
+	cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high;
+
+#ifdef CYTP_DEBUG_VERBOSE
+	psmouse_dbg(psmouse, "Dump trackpad hardware configuration as below:\n");
+	psmouse_dbg(psmouse, "cytp->tp_width = %d\n", cytp->tp_width);
+	psmouse_dbg(psmouse, "cytp->tp_high = %d\n", cytp->tp_high);
+	psmouse_dbg(psmouse, "cytp->tp_max_abs_x = %d\n", cytp->tp_max_abs_x);
+	psmouse_dbg(psmouse, "cytp->tp_max_abs_y = %d\n", cytp->tp_max_abs_y);
+	psmouse_dbg(psmouse, "cytp->tp_min_pressure = %d\n", cytp->tp_min_pressure);
+	psmouse_dbg(psmouse, "cytp->tp_max_pressure = %d\n", cytp->tp_max_pressure);
+	psmouse_dbg(psmouse, "cytp->tp_res_x = %d\n", cytp->tp_res_x);
+	psmouse_dbg(psmouse, "cytp->tp_res_y = %d\n", cytp->tp_res_y);
+
+	psmouse_dbg(psmouse, "tp_type_APA = %d\n",
+			(param[6] & TP_METRICS_BIT_APA) ? 1 : 0);
+	psmouse_dbg(psmouse, "tp_type_MTG = %d\n",
+			(param[6] & TP_METRICS_BIT_MTG) ? 1 : 0);
+	psmouse_dbg(psmouse, "tp_palm = %d\n",
+			(param[6] & TP_METRICS_BIT_PALM) ? 1 : 0);
+	psmouse_dbg(psmouse, "tp_stubborn = %d\n",
+			(param[6] & TP_METRICS_BIT_STUBBORN) ? 1 : 0);
+	psmouse_dbg(psmouse, "tp_1f_jitter = %d\n",
+			(param[6] & TP_METRICS_BIT_1F_JITTER) >> 2);
+	psmouse_dbg(psmouse, "tp_2f_jitter = %d\n",
+			(param[6] & TP_METRICS_BIT_2F_JITTER) >> 4);
+	psmouse_dbg(psmouse, "tp_1f_spike = %d\n",
+			param[7] & TP_METRICS_BIT_1F_SPIKE);
+	psmouse_dbg(psmouse, "tp_2f_spike = %d\n",
+			(param[7] & TP_METRICS_BIT_2F_SPIKE) >> 2);
+	psmouse_dbg(psmouse, "tp_abs_packet_format_set = %d\n",
+			(param[7] & TP_METRICS_BIT_ABS_PKT_FORMAT_SET) >> 4);
+#endif
+
+	return 0;
+}
+
+static int cypress_query_hardware(struct psmouse *psmouse)
+{
+	struct cytp_data *cytp = psmouse->private;
+	int ret;
+
+	ret = cypress_read_fw_version(psmouse);
+	if (ret)
+		return ret;
+
+	if (cytp->tp_metrics_supported) {
+		ret = cypress_read_tp_metrics(psmouse);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int cypress_set_absolute_mode(struct psmouse *psmouse)
+{
+	struct cytp_data *cytp = psmouse->private;
+	unsigned char param[3];
+
+	if (cypress_send_ext_cmd(psmouse, CYTP_CMD_ABS_WITH_PRESSURE_MODE, param) < 0)
+		return -1;
+
+	cytp->mode = (cytp->mode & ~CYTP_BIT_ABS_REL_MASK)
+			| CYTP_BIT_ABS_PRESSURE;
+	cypress_set_packet_size(psmouse, 5);
+
+	return 0;
+}
+
+/*
+ * Reset trackpad device.
+ * This is also the default mode when trackpad powered on.
+ */
+static void cypress_reset(struct psmouse *psmouse)
+{
+	struct cytp_data *cytp = psmouse->private;
+
+	cytp->mode = 0;
+
+	psmouse_reset(psmouse);
+}
+
+static int cypress_set_input_params(struct input_dev *input,
+				    struct cytp_data *cytp)
+{
+	int ret;
+
+	if (!cytp->tp_res_x || !cytp->tp_res_y)
+		return -EINVAL;
+
+	__set_bit(EV_ABS, input->evbit);
+	input_set_abs_params(input, ABS_X, 0, cytp->tp_max_abs_x, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, cytp->tp_max_abs_y, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE,
+			     cytp->tp_min_pressure, cytp->tp_max_pressure, 0, 0);
+	input_set_abs_params(input, ABS_TOOL_WIDTH, 0, 255, 0, 0);
+
+	/* finger position */
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, cytp->tp_max_abs_x, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cytp->tp_max_abs_y, 0, 0);
+	input_set_abs_params(input, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
+	ret = input_mt_init_slots(input, CYTP_MAX_MT_SLOTS,
+			INPUT_MT_DROP_UNUSED|INPUT_MT_TRACK);
+	if (ret < 0)
+		return ret;
+
+	__set_bit(INPUT_PROP_SEMI_MT, input->propbit);
+
+	input_abs_set_res(input, ABS_X, cytp->tp_res_x);
+	input_abs_set_res(input, ABS_Y, cytp->tp_res_y);
+
+	input_abs_set_res(input, ABS_MT_POSITION_X, cytp->tp_res_x);
+	input_abs_set_res(input, ABS_MT_POSITION_Y, cytp->tp_res_y);
+
+	__set_bit(BTN_TOUCH, input->keybit);
+	__set_bit(BTN_TOOL_FINGER, input->keybit);
+	__set_bit(BTN_TOOL_DOUBLETAP, input->keybit);
+	__set_bit(BTN_TOOL_TRIPLETAP, input->keybit);
+	__set_bit(BTN_TOOL_QUADTAP, input->keybit);
+	__set_bit(BTN_TOOL_QUINTTAP, input->keybit);
+
+	__clear_bit(EV_REL, input->evbit);
+	__clear_bit(REL_X, input->relbit);
+	__clear_bit(REL_Y, input->relbit);
+
+	__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(BTN_LEFT, input->keybit);
+	__set_bit(BTN_RIGHT, input->keybit);
+	__set_bit(BTN_MIDDLE, input->keybit);
+
+	input_set_drvdata(input, cytp);
+
+	return 0;
+}
+
+static int cypress_get_finger_count(unsigned char header_byte)
+{
+	unsigned char bits6_7;
+	int finger_count;
+
+	bits6_7 = header_byte >> 6;
+	finger_count = bits6_7 & 0x03;
+
+	if (finger_count == 1)
+		return 1;
+
+	if (header_byte & ABS_HSCROLL_BIT) {
+		/* HSCROLL gets added on to 0 finger count. */
+		switch (finger_count) {
+			case 0:	return 4;
+			case 2: return 5;
+			default:
+				/* Invalid contact (e.g. palm). Ignore it. */
+				return -1;
+		}
+	}
+
+	return finger_count;
+}
+
+
+static int cypress_parse_packet(struct psmouse *psmouse,
+				struct cytp_data *cytp, struct cytp_report_data *report_data)
+{
+	unsigned char *packet = psmouse->packet;
+	unsigned char header_byte = packet[0];
+	int contact_cnt;
+
+	memset(report_data, 0, sizeof(struct cytp_report_data));
+
+	contact_cnt = cypress_get_finger_count(header_byte);
+
+	if (contact_cnt < 0) /* e.g. palm detect */
+		return -EINVAL;
+
+	report_data->contact_cnt = contact_cnt;
+
+	report_data->tap = (header_byte & ABS_MULTIFINGER_TAP) ? 1 : 0;
+
+	if (report_data->contact_cnt == 1) {
+		report_data->contacts[0].x =
+			((packet[1] & 0x70) << 4) | packet[2];
+		report_data->contacts[0].y =
+			((packet[1] & 0x07) << 8) | packet[3];
+		if (cytp->mode & CYTP_BIT_ABS_PRESSURE)
+			report_data->contacts[0].z = packet[4];
+
+	} else if (report_data->contact_cnt >= 2) {
+		report_data->contacts[0].x =
+			((packet[1] & 0x70) << 4) | packet[2];
+		report_data->contacts[0].y =
+			((packet[1] & 0x07) << 8) | packet[3];
+		if (cytp->mode & CYTP_BIT_ABS_PRESSURE)
+			report_data->contacts[0].z = packet[4];
+
+		report_data->contacts[1].x =
+			((packet[5] & 0xf0) << 4) | packet[6];
+		report_data->contacts[1].y =
+			((packet[5] & 0x0f) << 8) | packet[7];
+		if (cytp->mode & CYTP_BIT_ABS_PRESSURE)
+			report_data->contacts[1].z = report_data->contacts[0].z;
+	}
+
+	report_data->left = (header_byte & BTN_LEFT_BIT) ? 1 : 0;
+	report_data->right = (header_byte & BTN_RIGHT_BIT) ? 1 : 0;
+
+	/*
+	 * This is only true if one of the mouse buttons were tapped.  Make
+	 * sure it doesn't turn into a click. The regular tap-to-click
+	 * functionality will handle that on its own. If we don't do this,
+	 * disabling tap-to-click won't affect the mouse button zones.
+	 */
+	if (report_data->tap)
+		report_data->left = 0;
+
+#ifdef CYTP_DEBUG_VERBOSE
+	{
+		int i;
+		int n = report_data->contact_cnt;
+		psmouse_dbg(psmouse, "Dump parsed report data as below:\n");
+		psmouse_dbg(psmouse, "contact_cnt = %d\n",
+			report_data->contact_cnt);
+		if (n > CYTP_MAX_MT_SLOTS)
+		    n = CYTP_MAX_MT_SLOTS;
+		for (i = 0; i < n; i++)
+			psmouse_dbg(psmouse, "contacts[%d] = {%d, %d, %d}\n", i,
+					report_data->contacts[i].x,
+					report_data->contacts[i].y,
+					report_data->contacts[i].z);
+		psmouse_dbg(psmouse, "left = %d\n", report_data->left);
+		psmouse_dbg(psmouse, "right = %d\n", report_data->right);
+		psmouse_dbg(psmouse, "middle = %d\n", report_data->middle);
+	}
+#endif
+
+	return 0;
+}
+
+static void cypress_process_packet(struct psmouse *psmouse, bool zero_pkt)
+{
+	int i;
+	struct input_dev *input = psmouse->dev;
+	struct cytp_data *cytp = psmouse->private;
+	struct cytp_report_data report_data;
+	struct cytp_contact *contact;
+	struct input_mt_pos pos[CYTP_MAX_MT_SLOTS];
+	int slots[CYTP_MAX_MT_SLOTS];
+	int n;
+
+	if (cypress_parse_packet(psmouse, cytp, &report_data))
+		return;
+
+	n = report_data.contact_cnt;
+
+	if (n > CYTP_MAX_MT_SLOTS)
+		n = CYTP_MAX_MT_SLOTS;
+
+	for (i = 0; i < n; i++) {
+		contact = &report_data.contacts[i];
+		pos[i].x = contact->x;
+		pos[i].y = contact->y;
+	}
+
+	input_mt_assign_slots(input, slots, pos, n);
+
+	for (i = 0; i < n; i++) {
+		contact = &report_data.contacts[i];
+		input_mt_slot(input, slots[i]);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+		input_report_abs(input, ABS_MT_POSITION_X, contact->x);
+		input_report_abs(input, ABS_MT_POSITION_Y, contact->y);
+		input_report_abs(input, ABS_MT_PRESSURE, contact->z);
+	}
+
+	input_mt_sync_frame(input);
+
+	input_mt_report_finger_count(input, report_data.contact_cnt);
+
+	input_report_key(input, BTN_LEFT, report_data.left);
+	input_report_key(input, BTN_RIGHT, report_data.right);
+	input_report_key(input, BTN_MIDDLE, report_data.middle);
+
+	input_sync(input);
+}
+
+static psmouse_ret_t cypress_validate_byte(struct psmouse *psmouse)
+{
+	int contact_cnt;
+	int index = psmouse->pktcnt - 1;
+	unsigned char *packet = psmouse->packet;
+	struct cytp_data *cytp = psmouse->private;
+
+	if (index < 0 || index > cytp->pkt_size)
+		return PSMOUSE_BAD_DATA;
+
+	if (index == 0 && (packet[0] & 0xfc) == 0) {
+		/* call packet process for reporting finger leave. */
+		cypress_process_packet(psmouse, 1);
+		return PSMOUSE_FULL_PACKET;
+	}
+
+	/*
+	 * Perform validation (and adjust packet size) based only on the
+	 * first byte; allow all further bytes through.
+	 */
+	if (index != 0)
+		return PSMOUSE_GOOD_DATA;
+
+	/*
+	 * If absolute/relative mode bit has not been set yet, just pass
+	 * the byte through.
+	 */
+	if ((cytp->mode & CYTP_BIT_ABS_REL_MASK) == 0)
+		return PSMOUSE_GOOD_DATA;
+
+	if ((packet[0] & 0x08) == 0x08)
+		return PSMOUSE_BAD_DATA;
+
+	contact_cnt = cypress_get_finger_count(packet[0]);
+
+	if (contact_cnt < 0)
+		return PSMOUSE_BAD_DATA;
+
+	if (cytp->mode & CYTP_BIT_ABS_NO_PRESSURE)
+		cypress_set_packet_size(psmouse, contact_cnt == 2 ? 7 : 4);
+	else
+		cypress_set_packet_size(psmouse, contact_cnt == 2 ? 8 : 5);
+
+	return PSMOUSE_GOOD_DATA;
+}
+
+static psmouse_ret_t cypress_protocol_handler(struct psmouse *psmouse)
+{
+	struct cytp_data *cytp = psmouse->private;
+
+	if (psmouse->pktcnt >= cytp->pkt_size) {
+		cypress_process_packet(psmouse, 0);
+		return PSMOUSE_FULL_PACKET;
+	}
+
+	return cypress_validate_byte(psmouse);
+}
+
+static void cypress_set_rate(struct psmouse *psmouse, unsigned int rate)
+{
+	struct cytp_data *cytp = psmouse->private;
+
+	if (rate >= 80) {
+		psmouse->rate = 80;
+		cytp->mode |= CYTP_BIT_HIGH_RATE;
+	} else {
+		psmouse->rate = 40;
+		cytp->mode &= ~CYTP_BIT_HIGH_RATE;
+	}
+
+	ps2_command(&psmouse->ps2dev, (unsigned char *)&psmouse->rate,
+		    PSMOUSE_CMD_SETRATE);
+}
+
+static void cypress_disconnect(struct psmouse *psmouse)
+{
+	cypress_reset(psmouse);
+	kfree(psmouse->private);
+	psmouse->private = NULL;
+}
+
+static int cypress_reconnect(struct psmouse *psmouse)
+{
+	int tries = CYTP_PS2_CMD_TRIES;
+	int rc;
+
+	do {
+		cypress_reset(psmouse);
+		rc = cypress_detect(psmouse, false);
+	} while (rc && (--tries > 0));
+
+	if (rc) {
+		psmouse_err(psmouse, "Reconnect: unable to detect trackpad.\n");
+		return -1;
+	}
+
+	if (cypress_set_absolute_mode(psmouse)) {
+		psmouse_err(psmouse, "Reconnect: Unable to initialize Cypress absolute mode.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+int cypress_init(struct psmouse *psmouse)
+{
+	struct cytp_data *cytp;
+
+	cytp = (struct cytp_data *)kzalloc(sizeof(struct cytp_data), GFP_KERNEL);
+	psmouse->private = (void *)cytp;
+	if (cytp == NULL)
+		return -ENOMEM;
+
+	cypress_reset(psmouse);
+
+	psmouse->pktsize = 8;
+
+	if (cypress_query_hardware(psmouse)) {
+		psmouse_err(psmouse, "Unable to query Trackpad hardware.\n");
+		goto err_exit;
+	}
+
+	if (cypress_set_absolute_mode(psmouse)) {
+		psmouse_err(psmouse, "init: Unable to initialize Cypress absolute mode.\n");
+		goto err_exit;
+	}
+
+	if (cypress_set_input_params(psmouse->dev, cytp) < 0) {
+		psmouse_err(psmouse, "init: Unable to set input params.\n");
+		goto err_exit;
+	}
+
+	psmouse->model = 1;
+	psmouse->protocol_handler = cypress_protocol_handler;
+	psmouse->set_rate = cypress_set_rate;
+	psmouse->disconnect = cypress_disconnect;
+	psmouse->reconnect = cypress_reconnect;
+	psmouse->cleanup = cypress_reset;
+	psmouse->resync_time = 0;
+
+	return 0;
+
+err_exit:
+	/*
+	 * Reset Cypress Trackpad as a standard mouse. Then
+	 * let psmouse driver commmunicating with it as default PS2 mouse.
+	 */
+	cypress_reset(psmouse);
+
+	psmouse->private = NULL;
+	kfree(cytp);
+
+	return -1;
+}
+
+bool cypress_supported(void)
+{
+	return true;
+}

drivers/input/mouse/cypress_ps2.h

@@ -0,0 +1,191 @@
+#ifndef _CYPRESS_PS2_H
+#define _CYPRESS_PS2_H
+
+#include "psmouse.h"
+
+#define CMD_BITS_MASK 0x03
+#define COMPOSIT(x, s) (((x) & CMD_BITS_MASK) << (s))
+
+#define ENCODE_CMD(aa, bb, cc, dd) \
+	(COMPOSIT((aa), 6) | COMPOSIT((bb), 4) | COMPOSIT((cc), 2) | COMPOSIT((dd), 0))
+#define CYTP_CMD_ABS_NO_PRESSURE_MODE       ENCODE_CMD(0, 1, 0, 0)
+#define CYTP_CMD_ABS_WITH_PRESSURE_MODE     ENCODE_CMD(0, 1, 0, 1)
+#define CYTP_CMD_SMBUS_MODE                 ENCODE_CMD(0, 1, 1, 0)
+#define CYTP_CMD_STANDARD_MODE              ENCODE_CMD(0, 2, 0, 0)  /* not implemented yet. */
+#define CYTP_CMD_CYPRESS_REL_MODE           ENCODE_CMD(1, 1, 1, 1)  /* not implemented yet. */
+#define CYTP_CMD_READ_CYPRESS_ID            ENCODE_CMD(0, 0, 0, 0)
+#define CYTP_CMD_READ_TP_METRICS            ENCODE_CMD(0, 0, 0, 1)
+#define CYTP_CMD_SET_HSCROLL_WIDTH(w)       ENCODE_CMD(1, 1, 0, (w))
+#define     CYTP_CMD_SET_HSCROLL_MASK       ENCODE_CMD(1, 1, 0, 0)
+#define CYTP_CMD_SET_VSCROLL_WIDTH(w)       ENCODE_CMD(1, 2, 0, (w))
+#define     CYTP_CMD_SET_VSCROLL_MASK       ENCODE_CMD(1, 2, 0, 0)
+#define CYTP_CMD_SET_PALM_GEOMETRY(e)       ENCODE_CMD(1, 2, 1, (e))
+#define     CYTP_CMD_PALM_GEMMETRY_MASK     ENCODE_CMD(1, 2, 1, 0)
+#define CYTP_CMD_SET_PALM_SENSITIVITY(s)    ENCODE_CMD(1, 2, 2, (s))
+#define     CYTP_CMD_PALM_SENSITIVITY_MASK  ENCODE_CMD(1, 2, 2, 0)
+#define CYTP_CMD_SET_MOUSE_SENSITIVITY(s)   ENCODE_CMD(1, 3, ((s) >> 2), (s))
+#define     CYTP_CMD_MOUSE_SENSITIVITY_MASK ENCODE_CMD(1, 3, 0, 0)
+#define CYTP_CMD_REQUEST_BASELINE_STATUS    ENCODE_CMD(2, 0, 0, 1)
+#define CYTP_CMD_REQUEST_RECALIBRATION      ENCODE_CMD(2, 0, 0, 3)
+
+#define DECODE_CMD_AA(x) (((x) >> 6) & CMD_BITS_MASK)
+#define DECODE_CMD_BB(x) (((x) >> 4) & CMD_BITS_MASK)
+#define DECODE_CMD_CC(x) (((x) >> 2) & CMD_BITS_MASK)
+#define DECODE_CMD_DD(x) ((x) & CMD_BITS_MASK)
+
+/* Cypress trackpad working mode. */
+#define CYTP_BIT_ABS_PRESSURE    (1 << 3)
+#define CYTP_BIT_ABS_NO_PRESSURE (1 << 2)
+#define CYTP_BIT_CYPRESS_REL     (1 << 1)
+#define CYTP_BIT_STANDARD_REL    (1 << 0)
+#define CYTP_BIT_REL_MASK (CYTP_BIT_CYPRESS_REL | CYTP_BIT_STANDARD_REL)
+#define CYTP_BIT_ABS_MASK (CYTP_BIT_ABS_PRESSURE | CYTP_BIT_ABS_NO_PRESSURE)
+#define CYTP_BIT_ABS_REL_MASK (CYTP_BIT_ABS_MASK | CYTP_BIT_REL_MASK)
+
+#define CYTP_BIT_HIGH_RATE       (1 << 4)
+/*
+ * report mode bit is set, firmware working in Remote Mode.
+ * report mode bit is cleared, firmware working in Stream Mode.
+ */
+#define CYTP_BIT_REPORT_MODE     (1 << 5)
+
+/* scrolling width values for set HSCROLL and VSCROLL width command. */
+#define SCROLL_WIDTH_NARROW 1
+#define SCROLL_WIDTH_NORMAL 2
+#define SCROLL_WIDTH_WIDE   3
+
+#define PALM_GEOMETRY_ENABLE  1
+#define PALM_GEOMETRY_DISABLE 0
+
+#define TP_METRICS_MASK  0x80
+#define FW_VERSION_MASX    0x7f
+#define FW_VER_HIGH_MASK 0x70
+#define FW_VER_LOW_MASK  0x0f
+
+/* Times to retry a ps2_command and millisecond delay between tries. */
+#define CYTP_PS2_CMD_TRIES 3
+#define CYTP_PS2_CMD_DELAY 500
+
+/* time out for PS/2 command only in milliseconds. */
+#define CYTP_CMD_TIMEOUT  200
+#define CYTP_DATA_TIMEOUT 30
+
+#define CYTP_EXT_CMD   0xe8
+#define CYTP_PS2_RETRY 0xfe
+#define CYTP_PS2_ERROR 0xfc
+
+#define CYTP_RESP_RETRY 0x01
+#define CYTP_RESP_ERROR 0xfe
+
+
+#define CYTP_105001_WIDTH  97   /* Dell XPS 13 */
+#define CYTP_105001_HIGH   59
+#define CYTP_DEFAULT_WIDTH (CYTP_105001_WIDTH)
+#define CYTP_DEFAULT_HIGH  (CYTP_105001_HIGH)
+
+#define CYTP_ABS_MAX_X     1600
+#define CYTP_ABS_MAX_Y     900
+#define CYTP_MAX_PRESSURE  255
+#define CYTP_MIN_PRESSURE  0
+
+/* header byte bits of relative package. */
+#define BTN_LEFT_BIT   0x01
+#define BTN_RIGHT_BIT  0x02
+#define BTN_MIDDLE_BIT 0x04
+#define REL_X_SIGN_BIT 0x10
+#define REL_Y_SIGN_BIT 0x20
+
+/* header byte bits of absolute package. */
+#define ABS_VSCROLL_BIT 0x10
+#define ABS_HSCROLL_BIT 0x20
+#define ABS_MULTIFINGER_TAP 0x04
+#define ABS_EDGE_MOTION_MASK 0x80
+
+#define DFLT_RESP_BITS_VALID     0x88  /* SMBus bit should not be set. */
+#define DFLT_RESP_SMBUS_BIT      0x80
+#define   DFLT_SMBUS_MODE        0x80
+#define   DFLT_PS2_MODE          0x00
+#define DFLT_RESP_BIT_MODE       0x40
+#define   DFLT_RESP_REMOTE_MODE  0x40
+#define   DFLT_RESP_STREAM_MODE  0x00
+#define DFLT_RESP_BIT_REPORTING  0x20
+#define DFLT_RESP_BIT_SCALING    0x10
+
+#define TP_METRICS_BIT_PALM               0x80
+#define TP_METRICS_BIT_STUBBORN           0x40
+#define TP_METRICS_BIT_2F_JITTER          0x30
+#define TP_METRICS_BIT_1F_JITTER          0x0c
+#define TP_METRICS_BIT_APA                0x02
+#define TP_METRICS_BIT_MTG                0x01
+#define TP_METRICS_BIT_ABS_PKT_FORMAT_SET 0xf0
+#define TP_METRICS_BIT_2F_SPIKE           0x0c
+#define TP_METRICS_BIT_1F_SPIKE           0x03
+
+/* bits of first byte response of E9h-Status Request command. */
+#define RESP_BTN_RIGHT_BIT  0x01
+#define RESP_BTN_MIDDLE_BIT 0x02
+#define RESP_BTN_LEFT_BIT   0x04
+#define RESP_SCALING_BIT    0x10
+#define RESP_ENABLE_BIT     0x20
+#define RESP_REMOTE_BIT     0x40
+#define RESP_SMBUS_BIT      0x80
+
+#define CYTP_MAX_MT_SLOTS 2
+
+struct cytp_contact {
+	int x;
+	int y;
+	int z;  /* also named as touch pressure. */
+};
+
+/* The structure of Cypress Trackpad event data. */
+struct cytp_report_data {
+	int contact_cnt;
+	struct cytp_contact contacts[CYTP_MAX_MT_SLOTS];
+	unsigned int left:1;
+	unsigned int right:1;
+	unsigned int middle:1;
+	unsigned int tap:1;  /* multi-finger tap detected. */
+};
+
+/* The structure of Cypress Trackpad device private data. */
+struct cytp_data {
+	int fw_version;
+
+	int pkt_size;
+	int mode;
+
+	int tp_min_pressure;
+	int tp_max_pressure;
+	int tp_width;  /* X direction physical size in mm. */
+	int tp_high;  /* Y direction physical size in mm. */
+	int tp_max_abs_x;  /* Max X absolute units that can be reported. */
+	int tp_max_abs_y;  /* Max Y absolute units that can be reported. */
+
+	int tp_res_x;  /* X resolution in units/mm. */
+	int tp_res_y;  /* Y resolution in units/mm. */
+
+	int tp_metrics_supported;
+};
+
+
+#ifdef CONFIG_MOUSE_PS2_CYPRESS
+int cypress_detect(struct psmouse *psmouse, bool set_properties);
+int cypress_init(struct psmouse *psmouse);
+bool cypress_supported(void);
+#else
+inline int cypress_detect(struct psmouse *psmouse, bool set_properties)
+{
+	return -ENOSYS;
+}
+inline int cypress_init(struct psmouse *psmouse)
+{
+	return -ENOSYS;
+}
+inline bool cypress_supported(void)
+{
+	return 0;
+}
+#endif /* CONFIG_MOUSE_PS2_CYPRESS */
+
+#endif  /* _CYPRESS_PS2_H */

drivers/input/mouse/psmouse-base.c

@@ -34,6 +34,7 @@
 #include "touchkit_ps2.h"
 #include "elantech.h"
 #include "sentelic.h"
+#include "cypress_ps2.h"
 
 #define DRIVER_DESC	"PS/2 mouse driver"
 
@@ -758,6 +759,28 @@ static int psmouse_extensions(struct psmouse *psmouse,
 		synaptics_reset(psmouse);
 	}
 
+/*
+ * Try Cypress Trackpad.
+ * Must try it before Finger Sensing Pad because Finger Sensing Pad probe
+ * upsets some modules of Cypress Trackpads.
+ */
+	if (max_proto > PSMOUSE_IMEX &&
+			cypress_detect(psmouse, set_properties) == 0) {
+		if (cypress_supported()) {
+			if (cypress_init(psmouse) == 0)
+				return PSMOUSE_CYPRESS;
+
+			/*
+			 * Finger Sensing Pad probe upsets some modules of
+			 * Cypress Trackpad, must avoid Finger Sensing Pad
+			 * probe if Cypress Trackpad device detected.
+			 */
+			return PSMOUSE_PS2;
+		}
+
+		max_proto = PSMOUSE_IMEX;
+	}
+
 /*
  * Try ALPS TouchPad
  */
@@ -896,6 +919,15 @@ static const struct psmouse_protocol psmouse_protocols[] = {
 		.alias		= "thinkps",
 		.detect		= thinking_detect,
 	},
+#ifdef CONFIG_MOUSE_PS2_CYPRESS
+	{
+		.type		= PSMOUSE_CYPRESS,
+		.name		= "CyPS/2",
+		.alias		= "cypress",
+		.detect		= cypress_detect,
+		.init		= cypress_init,
+	},
+#endif
 	{
 		.type		= PSMOUSE_GENPS,
 		.name		= "GenPS/2",

drivers/input/mouse/psmouse.h

@@ -95,6 +95,7 @@ enum psmouse_type {
 	PSMOUSE_ELANTECH,
 	PSMOUSE_FSP,
 	PSMOUSE_SYNAPTICS_RELATIVE,
+	PSMOUSE_CYPRESS,
 	PSMOUSE_AUTO		/* This one should always be last */
 };
 

drivers/input/mouse/synaptics.c

@@ -722,11 +722,13 @@ static void synaptics_report_mt_data(struct psmouse *psmouse,
 	default:
 		/*
 		 * If the finger slot contained in SGM is valid, and either
-		 * hasn't changed, or is new, then report SGM in MTB slot 0.
+		 * hasn't changed, or is new, or the old SGM has now moved to
+		 * AGM, then report SGM in MTB slot 0.
 		 * Otherwise, empty MTB slot 0.
 		 */
 		if (mt_state->sgm != -1 &&
-		    (mt_state->sgm == old->sgm || old->sgm == -1))
+		    (mt_state->sgm == old->sgm ||
+		     old->sgm == -1 || mt_state->agm == old->sgm))
 			synaptics_report_slot(dev, 0, sgm);
 		else
 			synaptics_report_slot(dev, 0, NULL);
@@ -735,9 +737,31 @@ static void synaptics_report_mt_data(struct psmouse *psmouse,
 		 * If the finger slot contained in AGM is valid, and either
 		 * hasn't changed, or is new, then report AGM in MTB slot 1.
 		 * Otherwise, empty MTB slot 1.
+		 *
+		 * However, in the case where the AGM is new, make sure that
+		 * that it is either the same as the old SGM, or there was no
+		 * SGM.
+		 *
+		 * Otherwise, if the SGM was just 1, and the new AGM is 2, then
+		 * the new AGM will keep the old SGM's tracking ID, which can
+		 * cause apparent drumroll.  This happens if in the following
+		 * valid finger sequence:
+		 *
+		 *  Action                 SGM  AGM (MTB slot:Contact)
+		 *  1. Touch contact 0    (0:0)
+		 *  2. Touch contact 1    (0:0, 1:1)
+		 *  3. Lift  contact 0    (1:1)
+		 *  4. Touch contacts 2,3 (0:2, 1:3)
+		 *
+		 * In step 4, contact 3, in AGM must not be given the same
+		 * tracking ID as contact 1 had in step 3.  To avoid this,
+		 * the first agm with contact 3 is dropped and slot 1 is
+		 * invalidated (tracking ID = -1).
 		 */
 		if (mt_state->agm != -1 &&
-		    (mt_state->agm == old->agm || old->agm == -1))
+		    (mt_state->agm == old->agm ||
+		     (old->agm == -1 &&
+		      (old->sgm == -1 || mt_state->agm == old->sgm))))
 			synaptics_report_slot(dev, 1, agm);
 		else
 			synaptics_report_slot(dev, 1, NULL);
@@ -1247,11 +1271,11 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 	input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 
 	if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) {
-		input_mt_init_slots(dev, 2, 0);
 		set_abs_position_params(dev, priv, ABS_MT_POSITION_X,
 					ABS_MT_POSITION_Y);
 		/* Image sensors can report per-contact pressure */
 		input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
+		input_mt_init_slots(dev, 2, INPUT_MT_POINTER);
 
 		/* Image sensors can signal 4 and 5 finger clicks */
 		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);

drivers/input/serio/Kconfig

@@ -236,6 +236,7 @@ config SERIO_PS2MULT
 
 config SERIO_ARC_PS2
 	tristate "ARC PS/2 support"
+	depends on GENERIC_HARDIRQS
 	help
 	  Say Y here if you have an ARC FPGA platform with a PS/2
 	  controller in it.

drivers/input/tablet/wacom_wac.c

@@ -359,6 +359,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 		case 0x802: /* Intuos4 General Pen */
 		case 0x804: /* Intuos4 Marker Pen */
 		case 0x40802: /* Intuos4 Classic Pen */
+		case 0x18803: /* DTH2242 Grip Pen */
 		case 0x022:
 			wacom->tool[idx] = BTN_TOOL_PEN;
 			break;
@@ -538,6 +539,13 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 				input_report_key(input, wacom->tool[1], 0);
 				input_report_abs(input, ABS_MISC, 0);
 			}
+		} else if (features->type == DTK) {
+			input_report_key(input, BTN_0, (data[6] & 0x01));
+			input_report_key(input, BTN_1, (data[6] & 0x02));
+			input_report_key(input, BTN_2, (data[6] & 0x04));
+			input_report_key(input, BTN_3, (data[6] & 0x08));
+			input_report_key(input, BTN_4, (data[6] & 0x10));
+			input_report_key(input, BTN_5, (data[6] & 0x20));
 		} else if (features->type == WACOM_24HD) {
 			input_report_key(input, BTN_0, (data[6] & 0x01));
 			input_report_key(input, BTN_1, (data[6] & 0x02));
@@ -785,25 +793,6 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	return 1;
 }
 
-static int find_slot_from_contactid(struct wacom_wac *wacom, int contactid)
-{
-	int touch_max = wacom->features.touch_max;
-	int i;
-
-	if (!wacom->slots)
-		return -1;
-
-	for (i = 0; i < touch_max; ++i) {
-		if (wacom->slots[i] == contactid)
-			return i;
-	}
-	for (i = 0; i < touch_max; ++i) {
-		if (wacom->slots[i] == -1)
-			return i;
-	}
-	return -1;
-}
-
 static int int_dist(int x1, int y1, int x2, int y2)
 {
 	int x = x2 - x1;
@@ -833,8 +822,7 @@ static int wacom_24hdt_irq(struct wacom_wac *wacom)
 	for (i = 0; i < contacts_to_send; i++) {
 		int offset = (WACOM_BYTES_PER_24HDT_PACKET * i) + 1;
 		bool touch = data[offset] & 0x1 && !wacom->shared->stylus_in_proximity;
-		int id = data[offset + 1];
+		int slot = input_mt_get_slot_by_key(input, data[offset + 1]);
-		int slot = find_slot_from_contactid(wacom, id);
 
 		if (slot < 0)
 			continue;
@@ -856,9 +844,7 @@ static int wacom_24hdt_irq(struct wacom_wac *wacom)
 			input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h));
 			input_report_abs(input, ABS_MT_ORIENTATION, w > h);
 		}
-		wacom->slots[slot] = touch ? id : -1;
 	}
-
 	input_mt_report_pointer_emulation(input, true);
 
 	wacom->num_contacts_left -= contacts_to_send;
@@ -895,7 +881,7 @@ static int wacom_mt_touch(struct wacom_wac *wacom)
 		int offset = (WACOM_BYTES_PER_MT_PACKET + x_offset) * i + 3;
 		bool touch = data[offset] & 0x1;
 		int id = le16_to_cpup((__le16 *)&data[offset + 1]);
-		int slot = find_slot_from_contactid(wacom, id);
+		int slot = input_mt_get_slot_by_key(input, id);
 
 		if (slot < 0)
 			continue;
@@ -908,9 +894,7 @@ static int wacom_mt_touch(struct wacom_wac *wacom)
 			input_report_abs(input, ABS_MT_POSITION_X, x);
 			input_report_abs(input, ABS_MT_POSITION_Y, y);
 		}
-		wacom->slots[slot] = touch ? id : -1;
 	}
-
 	input_mt_report_pointer_emulation(input, true);
 
 	wacom->num_contacts_left -= contacts_to_send;
@@ -942,12 +926,11 @@ static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
 			contact_with_no_pen_down_count++;
 		}
 	}
+	input_mt_report_pointer_emulation(input, true);
 
 	/* keep touch state for pen event */
 	wacom->shared->touch_down = (contact_with_no_pen_down_count > 0);
 
-	input_mt_report_pointer_emulation(input, true);
-
 	return 1;
 }
 
@@ -1104,12 +1087,15 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
 static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
 {
 	struct input_dev *input = wacom->input;
-	int slot_id = data[0] - 2;  /* data[0] is between 2 and 17 */
 	bool touch = data[1] & 0x80;
+	int slot = input_mt_get_slot_by_key(input, data[0]);
+
+	if (slot < 0)
+		return;
 
 	touch = touch && !wacom->shared->stylus_in_proximity;
 
-	input_mt_slot(input, slot_id);
+	input_mt_slot(input, slot);
 	input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
 
 	if (touch) {
@@ -1162,7 +1148,6 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom)
 			wacom_bpt3_button_msg(wacom, data + offset);
 
 	}
-
 	input_mt_report_pointer_emulation(input, true);
 
 	input_sync(input);
@@ -1319,6 +1304,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 	case WACOM_21UX2:
 	case WACOM_22HD:
 	case WACOM_24HD:
+	case DTK:
 		sync = wacom_intuos_irq(wacom_wac);
 		break;
 
@@ -1444,6 +1430,51 @@ static unsigned int wacom_calculate_touch_res(unsigned int logical_max,
        return (logical_max * 100) / physical_max;
 }
 
+static void wacom_abs_set_axis(struct input_dev *input_dev,
+			       struct wacom_wac *wacom_wac)
+{
+	struct wacom_features *features = &wacom_wac->features;
+
+	if (features->device_type == BTN_TOOL_PEN) {
+		input_set_abs_params(input_dev, ABS_X, 0, features->x_max,
+				     features->x_fuzz, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0, features->y_max,
+				     features->y_fuzz, 0);
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0,
+			features->pressure_max, features->pressure_fuzz, 0);
+
+		/* penabled devices have fixed resolution for each model */
+		input_abs_set_res(input_dev, ABS_X, features->x_resolution);
+		input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
+	} else {
+		if (features->touch_max <= 2) {
+			input_set_abs_params(input_dev, ABS_X, 0,
+				features->x_max, features->x_fuzz, 0);
+			input_set_abs_params(input_dev, ABS_Y, 0,
+				features->y_max, features->y_fuzz, 0);
+			input_abs_set_res(input_dev, ABS_X,
+				wacom_calculate_touch_res(features->x_max,
+							features->x_phy));
+			input_abs_set_res(input_dev, ABS_Y,
+				wacom_calculate_touch_res(features->y_max,
+							features->y_phy));
+		}
+
+		if (features->touch_max > 1) {
+			input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
+				features->x_max, features->x_fuzz, 0);
+			input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
+				features->y_max, features->y_fuzz, 0);
+			input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+				wacom_calculate_touch_res(features->x_max,
+							features->x_phy));
+			input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+				wacom_calculate_touch_res(features->y_max,
+							features->y_phy));
+		}
+	}
+}
+
 int wacom_setup_input_capabilities(struct input_dev *input_dev,
 				   struct wacom_wac *wacom_wac)
 {
@@ -1453,30 +1484,10 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 
 	__set_bit(BTN_TOUCH, input_dev->keybit);
-
-	input_set_abs_params(input_dev, ABS_X, 0, features->x_max,
-			     features->x_fuzz, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, features->y_max,
-			     features->y_fuzz, 0);
-
-	if (features->device_type == BTN_TOOL_PEN) {
-		input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max,
-			     features->pressure_fuzz, 0);
-
-		/* penabled devices have fixed resolution for each model */
-		input_abs_set_res(input_dev, ABS_X, features->x_resolution);
-		input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
-	} else {
-		input_abs_set_res(input_dev, ABS_X,
-			wacom_calculate_touch_res(features->x_max,
-						features->x_phy));
-		input_abs_set_res(input_dev, ABS_Y,
-			wacom_calculate_touch_res(features->y_max,
-						features->y_phy));
-	}
-
 	__set_bit(ABS_MISC, input_dev->absbit);
 
+	wacom_abs_set_axis(input_dev, wacom_wac);
+
 	switch (wacom_wac->features.type) {
 	case WACOM_MO:
 		input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
@@ -1513,12 +1524,17 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 		__set_bit(BTN_Y, input_dev->keybit);
 		__set_bit(BTN_Z, input_dev->keybit);
 
-		for (i = 0; i < 10; i++)
+		for (i = 6; i < 10; i++)
 			__set_bit(BTN_0 + i, input_dev->keybit);
 
 		__set_bit(KEY_PROG1, input_dev->keybit);
 		__set_bit(KEY_PROG2, input_dev->keybit);
 		__set_bit(KEY_PROG3, input_dev->keybit);
+		/* fall through */
+
+	case DTK:
+		for (i = 0; i < 6; i++)
+			__set_bit(BTN_0 + i, input_dev->keybit);
 
 		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
 		input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
@@ -1614,24 +1630,11 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 		} else if (features->device_type == BTN_TOOL_FINGER) {
 			__clear_bit(ABS_MISC, input_dev->absbit);
 
-			__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
-			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
-			__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
-			__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
-
-			input_mt_init_slots(input_dev, features->touch_max, 0);
-
 			input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
 			                     0, features->x_max, 0, 0);
 			input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
 			                     0, features->y_max, 0, 0);
-
+			input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
-			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
-					     0, features->x_max,
-					     features->x_fuzz, 0);
-			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
-					     0, features->y_max,
-					     features->y_fuzz, 0);
 		}
 		break;
 
@@ -1662,27 +1665,14 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 	case MTSCREEN:
 	case MTTPC:
-		if (features->device_type == BTN_TOOL_FINGER) {
-			wacom_wac->slots = kmalloc(features->touch_max *
-							sizeof(int),
-						   GFP_KERNEL);
-			if (!wacom_wac->slots)
-				return -ENOMEM;
-
-			for (i = 0; i < features->touch_max; i++)
-				wacom_wac->slots[i] = -1;
-		}
-		/* fall through */
-
 	case TABLETPC2FG:
 		if (features->device_type == BTN_TOOL_FINGER) {
-			input_mt_init_slots(input_dev, features->touch_max, 0);
+			unsigned int flags = INPUT_MT_DIRECT;
-			input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
+
-					0, MT_TOOL_MAX, 0, 0);
+			if (wacom_wac->features.type == TABLETPC2FG)
-			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+				flags = 0;
-					0, features->x_max, 0, 0);
+
-			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			input_mt_init_slots(input_dev, features->touch_max, flags);
-					0, features->y_max, 0, 0);
 		}
 		/* fall through */
 
@@ -1725,35 +1715,26 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
 
 		if (features->device_type == BTN_TOOL_FINGER) {
+			unsigned int flags = INPUT_MT_POINTER;
+
 			__set_bit(BTN_LEFT, input_dev->keybit);
 			__set_bit(BTN_FORWARD, input_dev->keybit);
 			__set_bit(BTN_BACK, input_dev->keybit);
 			__set_bit(BTN_RIGHT, input_dev->keybit);
 
-			__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
-			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
-			input_mt_init_slots(input_dev, features->touch_max, 0);
-
 			if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
-				__set_bit(BTN_TOOL_TRIPLETAP,
-					  input_dev->keybit);
-				__set_bit(BTN_TOOL_QUADTAP,
-					  input_dev->keybit);
-
 				input_set_abs_params(input_dev,
 						     ABS_MT_TOUCH_MAJOR,
 						     0, features->x_max, 0, 0);
 				input_set_abs_params(input_dev,
 						     ABS_MT_TOUCH_MINOR,
 						     0, features->y_max, 0, 0);
+			} else {
+				__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+				__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+				flags = 0;
 			}
-
+			input_mt_init_slots(input_dev, features->touch_max, flags);
-			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
-					     0, features->x_max,
-					     features->x_fuzz, 0);
-			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
-					     0, features->y_max,
-					     features->y_fuzz, 0);
 		} else if (features->device_type == BTN_TOOL_PEN) {
 			__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
 			__set_bit(BTN_TOOL_PEN, input_dev->keybit);
@@ -1978,6 +1959,13 @@ static const struct wacom_features wacom_features_0xCE =
 static const struct wacom_features wacom_features_0xF0 =
 	{ "Wacom DTU1631",        WACOM_PKGLEN_GRAPHIRE,  34623, 19553,  511,
 	  0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x59 = /* Pen */
+	{ "Wacom DTH2242",        WACOM_PKGLEN_INTUOS,    95840, 54260, 2047,
+	  63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D };
+static const struct wacom_features wacom_features_0x5D = /* Touch */
+	{ "Wacom DTH2242",       .type = WACOM_24HDT,
+	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10 };
 static const struct wacom_features wacom_features_0xCC =
 	{ "Wacom Cintiq 21UX2",   WACOM_PKGLEN_INTUOS,    87200, 65600, 2047,
 	  63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
@@ -2152,6 +2140,8 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x43) },
 	{ USB_DEVICE_WACOM(0x44) },
 	{ USB_DEVICE_WACOM(0x45) },
+	{ USB_DEVICE_WACOM(0x59) },
+	{ USB_DEVICE_WACOM(0x5D) },
 	{ USB_DEVICE_WACOM(0xB0) },
 	{ USB_DEVICE_WACOM(0xB1) },
 	{ USB_DEVICE_WACOM(0xB2) },

drivers/input/tablet/wacom_wac.h

@@ -78,6 +78,7 @@ enum {
 	INTUOS5L,
 	WACOM_21UX2,
 	WACOM_22HD,
+	DTK,
 	WACOM_24HD,
 	CINTIQ,
 	WACOM_BEE,
@@ -135,7 +136,6 @@ struct wacom_wac {
 	int pid;
 	int battery_capacity;
 	int num_contacts_left;
-	int *slots;
 };
 
 #endif

drivers/input/touchscreen/Kconfig

@@ -359,7 +359,7 @@ config TOUCHSCREEN_MCS5000
 
 config TOUCHSCREEN_MMS114
 	tristate "MELFAS MMS114 touchscreen"
-	depends on I2C
+	depends on I2C && GENERIC_HARDIRQS
 	help
 	  Say Y here if you have the MELFAS MMS114 touchscreen controller
 	  chip in your system.

drivers/input/touchscreen/cyttsp_spi.c

@@ -193,7 +193,6 @@ static struct spi_driver cyttsp_spi_driver = {
 
 module_spi_driver(cyttsp_spi_driver);
 
-MODULE_ALIAS("spi:cyttsp");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver");
 MODULE_AUTHOR("Cypress");

drivers/input/touchscreen/mms114.c

@@ -429,12 +429,12 @@ static int mms114_probe(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	data = kzalloc(sizeof(struct mms114_data), GFP_KERNEL);
+	data = devm_kzalloc(&client->dev, sizeof(struct mms114_data),
-	input_dev = input_allocate_device();
+			    GFP_KERNEL);
+	input_dev = devm_input_allocate_device(&client->dev);
 	if (!data || !input_dev) {
 		dev_err(&client->dev, "Failed to allocate memory\n");
-		error = -ENOMEM;
+		return -ENOMEM;
-		goto err_free_mem;
 	}
 
 	data->client = client;
@@ -466,57 +466,36 @@ static int mms114_probe(struct i2c_client *client,
 	input_set_drvdata(input_dev, data);
 	i2c_set_clientdata(client, data);
 
-	data->core_reg = regulator_get(&client->dev, "avdd");
+	data->core_reg = devm_regulator_get(&client->dev, "avdd");
 	if (IS_ERR(data->core_reg)) {
 		error = PTR_ERR(data->core_reg);
 		dev_err(&client->dev,
 			"Unable to get the Core regulator (%d)\n", error);
-		goto err_free_mem;
+		return error;
 	}
 
-	data->io_reg = regulator_get(&client->dev, "vdd");
+	data->io_reg = devm_regulator_get(&client->dev, "vdd");
 	if (IS_ERR(data->io_reg)) {
 		error = PTR_ERR(data->io_reg);
 		dev_err(&client->dev,
 			"Unable to get the IO regulator (%d)\n", error);
-		goto err_core_reg;
+		return error;
 	}
 
-	error = request_threaded_irq(client->irq, NULL, mms114_interrupt,
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
-			IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "mms114", data);
+			mms114_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			dev_name(&client->dev), data);
 	if (error) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
-		goto err_io_reg;
+		return error;
 	}
 	disable_irq(client->irq);
 
 	error = input_register_device(data->input_dev);
-	if (error)
+	if (error) {
-		goto err_free_irq;
+		dev_err(&client->dev, "Failed to register input device\n");
-
+		return error;
-	return 0;
+	}
-
-err_free_irq:
-	free_irq(client->irq, data);
-err_io_reg:
-	regulator_put(data->io_reg);
-err_core_reg:
-	regulator_put(data->core_reg);
-err_free_mem:
-	input_free_device(input_dev);
-	kfree(data);
-	return error;
-}
-
-static int mms114_remove(struct i2c_client *client)
-{
-	struct mms114_data *data = i2c_get_clientdata(client);
-
-	free_irq(client->irq, data);
-	regulator_put(data->io_reg);
-	regulator_put(data->core_reg);
-	input_unregister_device(data->input_dev);
-	kfree(data);
 
 	return 0;
 }
@@ -590,7 +569,6 @@ static struct i2c_driver mms114_driver = {
 		.of_match_table = of_match_ptr(mms114_dt_match),
 	},
 	.probe		= mms114_probe,
-	.remove		= mms114_remove,
 	.id_table	= mms114_id,
 };
 

drivers/input/touchscreen/stmpe-ts.c

@@ -120,6 +120,7 @@ static void stmpe_work(struct work_struct *work)
 	__stmpe_reset_fifo(ts->stmpe);
 
 	input_report_abs(ts->idev, ABS_PRESSURE, 0);
+	input_report_key(ts->idev, BTN_TOUCH, 0);
 	input_sync(ts->idev);
 }
 
@@ -153,6 +154,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data)
 	input_report_abs(ts->idev, ABS_X, x);
 	input_report_abs(ts->idev, ABS_Y, y);
 	input_report_abs(ts->idev, ABS_PRESSURE, z);
+	input_report_key(ts->idev, BTN_TOUCH, 1);
 	input_sync(ts->idev);
 
        /* flush the FIFO after we have read out our values. */

drivers/input/touchscreen/tsc2005.c

@@ -753,3 +753,4 @@ module_spi_driver(tsc2005_driver);
 MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>");
 MODULE_DESCRIPTION("TSC2005 Touchscreen Driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:tsc2005");

drivers/input/touchscreen/wm831x-ts.c

@@ -247,7 +247,7 @@ static int wm831x_ts_probe(struct platform_device *pdev)
 
 	wm831x_ts = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_ts),
 				 GFP_KERNEL);
-	input_dev = input_allocate_device();
+	input_dev = devm_input_allocate_device(&pdev->dev);
 	if (!wm831x_ts || !input_dev) {
 		error = -ENOMEM;
 		goto err_alloc;
@@ -376,7 +376,6 @@ err_pd_irq:
 err_data_irq:
 	free_irq(wm831x_ts->data_irq, wm831x_ts);
 err_alloc:
-	input_free_device(input_dev);
 
 	return error;
 }
@@ -387,7 +386,6 @@ static int wm831x_ts_remove(struct platform_device *pdev)
 
 	free_irq(wm831x_ts->pd_irq, wm831x_ts);
 	free_irq(wm831x_ts->data_irq, wm831x_ts);
-	input_unregister_device(wm831x_ts->input_dev);
 
 	return 0;
 }

drivers/tty/sysrq.c

@@ -42,6 +42,7 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/uaccess.h>
+#include <linux/moduleparam.h>
 
 #include <asm/ptrace.h>
 #include <asm/irq_regs.h>
@@ -578,8 +579,71 @@ struct sysrq_state {
 	bool active;
 	bool need_reinject;
 	bool reinjecting;
+
+	/* reset sequence handling */
+	bool reset_canceled;
+	unsigned long reset_keybit[BITS_TO_LONGS(KEY_CNT)];
+	int reset_seq_len;
+	int reset_seq_cnt;
+	int reset_seq_version;
 };
 
+#define SYSRQ_KEY_RESET_MAX	20 /* Should be plenty */
+static unsigned short sysrq_reset_seq[SYSRQ_KEY_RESET_MAX];
+static unsigned int sysrq_reset_seq_len;
+static unsigned int sysrq_reset_seq_version = 1;
+
+static void sysrq_parse_reset_sequence(struct sysrq_state *state)
+{
+	int i;
+	unsigned short key;
+
+	state->reset_seq_cnt = 0;
+
+	for (i = 0; i < sysrq_reset_seq_len; i++) {
+		key = sysrq_reset_seq[i];
+
+		if (key == KEY_RESERVED || key > KEY_MAX)
+			break;
+
+		__set_bit(key, state->reset_keybit);
+		state->reset_seq_len++;
+
+		if (test_bit(key, state->key_down))
+			state->reset_seq_cnt++;
+	}
+
+	/* Disable reset until old keys are not released */
+	state->reset_canceled = state->reset_seq_cnt != 0;
+
+	state->reset_seq_version = sysrq_reset_seq_version;
+}
+
+static bool sysrq_detect_reset_sequence(struct sysrq_state *state,
+					unsigned int code, int value)
+{
+	if (!test_bit(code, state->reset_keybit)) {
+		/*
+		 * Pressing any key _not_ in reset sequence cancels
+		 * the reset sequence.
+		 */
+		if (value && state->reset_seq_cnt)
+			state->reset_canceled = true;
+	} else if (value == 0) {
+		/* key release */
+		if (--state->reset_seq_cnt == 0)
+			state->reset_canceled = false;
+	} else if (value == 1) {
+		/* key press, not autorepeat */
+		if (++state->reset_seq_cnt == state->reset_seq_len &&
+		    !state->reset_canceled) {
+			return true;
+		}
+	}
+
+	return false;
+}
+
 static void sysrq_reinject_alt_sysrq(struct work_struct *work)
 {
 	struct sysrq_state *sysrq =
@@ -606,11 +670,104 @@ static void sysrq_reinject_alt_sysrq(struct work_struct *work)
 	}
 }
 
+static bool sysrq_handle_keypress(struct sysrq_state *sysrq,
+				  unsigned int code, int value)
+{
+	bool was_active = sysrq->active;
+	bool suppress;
+
+	switch (code) {
+
+	case KEY_LEFTALT:
+	case KEY_RIGHTALT:
+		if (!value) {
+			/* One of ALTs is being released */
+			if (sysrq->active && code == sysrq->alt_use)
+				sysrq->active = false;
+
+			sysrq->alt = KEY_RESERVED;
+
+		} else if (value != 2) {
+			sysrq->alt = code;
+			sysrq->need_reinject = false;
+		}
+		break;
+
+	case KEY_SYSRQ:
+		if (value == 1 && sysrq->alt != KEY_RESERVED) {
+			sysrq->active = true;
+			sysrq->alt_use = sysrq->alt;
+			/*
+			 * If nothing else will be pressed we'll need
+			 * to re-inject Alt-SysRq keysroke.
+			 */
+			sysrq->need_reinject = true;
+		}
+
+		/*
+		 * Pretend that sysrq was never pressed at all. This
+		 * is needed to properly handle KGDB which will try
+		 * to release all keys after exiting debugger. If we
+		 * do not clear key bit it KGDB will end up sending
+		 * release events for Alt and SysRq, potentially
+		 * triggering print screen function.
+		 */
+		if (sysrq->active)
+			clear_bit(KEY_SYSRQ, sysrq->handle.dev->key);
+
+		break;
+
+	default:
+		if (sysrq->active && value && value != 2) {
+			sysrq->need_reinject = false;
+			__handle_sysrq(sysrq_xlate[code], true);
+		}
+		break;
+	}
+
+	suppress = sysrq->active;
+
+	if (!sysrq->active) {
+
+		/*
+		 * See if reset sequence has changed since the last time.
+		 */
+		if (sysrq->reset_seq_version != sysrq_reset_seq_version)
+			sysrq_parse_reset_sequence(sysrq);
+
+		/*
+		 * If we are not suppressing key presses keep track of
+		 * keyboard state so we can release keys that have been
+		 * pressed before entering SysRq mode.
+		 */
+		if (value)
+			set_bit(code, sysrq->key_down);
+		else
+			clear_bit(code, sysrq->key_down);
+
+		if (was_active)
+			schedule_work(&sysrq->reinject_work);
+
+		if (sysrq_detect_reset_sequence(sysrq, code, value)) {
+			/* Force emergency reboot */
+			__handle_sysrq(sysrq_xlate[KEY_B], false);
+		}
+
+	} else if (value == 0 && test_and_clear_bit(code, sysrq->key_down)) {
+		/*
+		 * Pass on release events for keys that was pressed before
+		 * entering SysRq mode.
+		 */
+		suppress = false;
+	}
+
+	return suppress;
+}
+
 static bool sysrq_filter(struct input_handle *handle,
 			 unsigned int type, unsigned int code, int value)
 {
 	struct sysrq_state *sysrq = handle->private;
-	bool was_active = sysrq->active;
 	bool suppress;
 
 	/*
@@ -627,79 +784,7 @@ static bool sysrq_filter(struct input_handle *handle,
 		break;
 
 	case EV_KEY:
-		switch (code) {
+		suppress = sysrq_handle_keypress(sysrq, code, value);
-
-		case KEY_LEFTALT:
-		case KEY_RIGHTALT:
-			if (!value) {
-				/* One of ALTs is being released */
-				if (sysrq->active && code == sysrq->alt_use)
-					sysrq->active = false;
-
-				sysrq->alt = KEY_RESERVED;
-
-			} else if (value != 2) {
-				sysrq->alt = code;
-				sysrq->need_reinject = false;
-			}
-			break;
-
-		case KEY_SYSRQ:
-			if (value == 1 && sysrq->alt != KEY_RESERVED) {
-				sysrq->active = true;
-				sysrq->alt_use = sysrq->alt;
-				/*
-				 * If nothing else will be pressed we'll need
-				 * to re-inject Alt-SysRq keysroke.
-				 */
-				sysrq->need_reinject = true;
-			}
-
-			/*
-			 * Pretend that sysrq was never pressed at all. This
-			 * is needed to properly handle KGDB which will try
-			 * to release all keys after exiting debugger. If we
-			 * do not clear key bit it KGDB will end up sending
-			 * release events for Alt and SysRq, potentially
-			 * triggering print screen function.
-			 */
-			if (sysrq->active)
-				clear_bit(KEY_SYSRQ, handle->dev->key);
-
-			break;
-
-		default:
-			if (sysrq->active && value && value != 2) {
-				sysrq->need_reinject = false;
-				__handle_sysrq(sysrq_xlate[code], true);
-			}
-			break;
-		}
-
-		suppress = sysrq->active;
-
-		if (!sysrq->active) {
-			/*
-			 * If we are not suppressing key presses keep track of
-			 * keyboard state so we can release keys that have been
-			 * pressed before entering SysRq mode.
-			 */
-			if (value)
-				set_bit(code, sysrq->key_down);
-			else
-				clear_bit(code, sysrq->key_down);
-
-			if (was_active)
-				schedule_work(&sysrq->reinject_work);
-
-		} else if (value == 0 &&
-			   test_and_clear_bit(code, sysrq->key_down)) {
-			/*
-			 * Pass on release events for keys that was pressed before
-			 * entering SysRq mode.
-			 */
-			suppress = false;
-		}
 		break;
 
 	default:
@@ -787,7 +872,20 @@ static bool sysrq_handler_registered;
 
 static inline void sysrq_register_handler(void)
 {
+	extern unsigned short platform_sysrq_reset_seq[] __weak;
+	unsigned short key;
 	int error;
+	int i;
+
+	if (platform_sysrq_reset_seq) {
+		for (i = 0; i < ARRAY_SIZE(sysrq_reset_seq); i++) {
+			key = platform_sysrq_reset_seq[i];
+			if (key == KEY_RESERVED || key > KEY_MAX)
+				break;
+
+			sysrq_reset_seq[sysrq_reset_seq_len++] = key;
+		}
+	}
 
 	error = input_register_handler(&sysrq_handler);
 	if (error)
@@ -804,6 +902,36 @@ static inline void sysrq_unregister_handler(void)
 	}
 }
 
+static int sysrq_reset_seq_param_set(const char *buffer,
+				     const struct kernel_param *kp)
+{
+	unsigned long val;
+	int error;
+
+	error = strict_strtoul(buffer, 0, &val);
+	if (error < 0)
+		return error;
+
+	if (val > KEY_MAX)
+		return -EINVAL;
+
+	*((unsigned short *)kp->arg) = val;
+	sysrq_reset_seq_version++;
+
+	return 0;
+}
+
+static struct kernel_param_ops param_ops_sysrq_reset_seq = {
+	.get	= param_get_ushort,
+	.set	= sysrq_reset_seq_param_set,
+};
+
+#define param_check_sysrq_reset_seq(name, p)	\
+	__param_check(name, p, unsigned short)
+
+module_param_array_named(reset_seq, sysrq_reset_seq, sysrq_reset_seq,
+			 &sysrq_reset_seq_len, 0644);
+
 #else
 
 static inline void sysrq_register_handler(void)

include/linux/bma150.h

@@ -22,6 +22,18 @@
 
 #define BMA150_DRIVER		"bma150"
 
+#define BMA150_RANGE_2G		0
+#define BMA150_RANGE_4G		1
+#define BMA150_RANGE_8G		2
+
+#define BMA150_BW_25HZ		0
+#define BMA150_BW_50HZ		1
+#define BMA150_BW_100HZ		2
+#define BMA150_BW_190HZ		3
+#define BMA150_BW_375HZ		4
+#define BMA150_BW_750HZ		5
+#define BMA150_BW_1500HZ	6
+
 struct bma150_cfg {
 	bool any_motion_int;		/* Set to enable any-motion interrupt */
 	bool hg_int;			/* Set to enable high-G interrupt */
@@ -34,8 +46,8 @@ struct bma150_cfg {
 	unsigned char lg_hyst;		/* Low-G hysterisis */
 	unsigned char lg_dur;		/* Low-G duration */
 	unsigned char lg_thres;		/* Low-G threshold */
-	unsigned char range;		/* BMA0150_RANGE_xxx (in G) */
+	unsigned char range;		/* one of BMA0150_RANGE_xxx */
-	unsigned char bandwidth;	/* BMA0150_BW_xxx (in Hz) */
+	unsigned char bandwidth;	/* one of BMA0150_BW_xxx */
 };
 
 struct bma150_platform_data {

include/linux/input/adxl34x.h

@@ -13,6 +13,8 @@
 #ifndef __LINUX_INPUT_ADXL34X_H__
 #define __LINUX_INPUT_ADXL34X_H__
 
+#include <linux/input.h>
+
 struct adxl34x_platform_data {
 
 	/*

include/linux/input/tegra_kbc.h

@@ -1,62 +0,0 @@
-/*
- * Platform definitions for tegra-kbc keyboard input driver
- *
- * Copyright (c) 2010-2011, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#ifndef ASMARM_ARCH_TEGRA_KBC_H
-#define ASMARM_ARCH_TEGRA_KBC_H
-
-#include <linux/types.h>
-#include <linux/input/matrix_keypad.h>
-
-#define KBC_MAX_GPIO	24
-#define KBC_MAX_KPENT	8
-
-#define KBC_MAX_ROW	16
-#define KBC_MAX_COL	8
-#define KBC_MAX_KEY	(KBC_MAX_ROW * KBC_MAX_COL)
-
-enum tegra_pin_type {
-	PIN_CFG_IGNORE,
-	PIN_CFG_COL,
-	PIN_CFG_ROW,
-};
-
-struct tegra_kbc_pin_cfg {
-	enum tegra_pin_type type;
-	unsigned char num;
-};
-
-struct tegra_kbc_wake_key {
-	u8 row:4;
-	u8 col:4;
-};
-
-struct tegra_kbc_platform_data {
-	unsigned int debounce_cnt;
-	unsigned int repeat_cnt;
-
-	struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
-	const struct matrix_keymap_data *keymap_data;
-
-	u32 wakeup_key;
-	bool wakeup;
-	bool use_fn_map;
-	bool use_ghost_filter;
-};
-#endif

include/linux/libps2.h

@@ -36,7 +36,7 @@ struct ps2dev {
 	wait_queue_head_t wait;
 
 	unsigned long flags;
-	unsigned char cmdbuf[6];
+	unsigned char cmdbuf[8];
 	unsigned char cmdcnt;
 	unsigned char nak;
 };