diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt index 13e2ef496724..275c6ea356f6 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt @@ -8,10 +8,10 @@ Required properties: - interrupts : The interrupt from the HDA controller. - clocks : Must contain an entry for each required entry in clock-names. See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi +- clock-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. -- reset-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi +- reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x Example: @@ -24,7 +24,7 @@ hda@0,70030000 { <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&tegra_car 125>, /* hda */ - <&tegra_car 128>; /* hda2hdmi */ - <&tegra_car 111>, /* hda2codec_2x */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ reset-names = "hda", "hda2hdmi", "hda2codec_2x"; }; diff --git a/MAINTAINERS b/MAINTAINERS index 2a3ab9718b4b..671a8f8084ce 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1471,9 +1471,7 @@ F: arch/arm/boot/dts/emev2* F: arch/arm/boot/dts/r7s* F: arch/arm/boot/dts/r8a* F: arch/arm/boot/dts/sh* -F: arch/arm/configs/armadillo800eva_defconfig F: arch/arm/configs/bockw_defconfig -F: arch/arm/configs/kzm9g_defconfig F: arch/arm/configs/marzen_defconfig F: arch/arm/configs/shmobile_defconfig F: arch/arm/include/debug/renesas-scif.S diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ede2526ecf1f..41cbb4a53066 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -268,7 +268,6 @@ config PHYS_OFFSET depends on !ARM_PATCH_PHYS_VIRT default DRAM_BASE if !MMU default 0x00000000 if ARCH_EBSA110 || \ - EP93XX_SDCE3_SYNC_PHYS_OFFSET || \ ARCH_FOOTBRIDGE || \ ARCH_INTEGRATOR || \ ARCH_IOP13XX || \ @@ -277,10 +276,7 @@ config PHYS_OFFSET default 0x10000000 if ARCH_OMAP1 || ARCH_RPC default 0x20000000 if ARCH_S5PV210 default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET - default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100 - default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET - default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET - default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET + default 0xc0000000 if ARCH_SA1100 help Please provide the physical address corresponding to the location of main memory in your system. @@ -418,11 +414,14 @@ config ARCH_EP93XX bool "EP93xx-based" select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET select ARM_AMBA + select ARM_PATCH_PHYS_VIRT select ARM_VIC + select AUTO_ZRELADDR select CLKDEV_LOOKUP + select CLKSRC_MMIO select CPU_ARM920T + select GENERIC_CLOCKEVENTS help This enables support for the Cirrus EP93xx series of CPUs. diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 7a13aebacf81..3f9a9ebc77c3 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -51,10 +51,6 @@ else endif endif -ifeq ($(CONFIG_ARCH_SHMOBILE_LEGACY),y) -OBJS += head-shmobile.o -endif - # # We now have a PIC decompressor implementation. Decompressors running # from RAM should not define ZTEXTADDR. Decompressors running directly diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S deleted file mode 100644 index 22a75259faa3..000000000000 --- a/arch/arm/boot/compressed/head-shmobile.S +++ /dev/null @@ -1,71 +0,0 @@ -/* - * The head-file for SH-Mobile ARM platforms - * - * Kuninori Morimoto - * Simon Horman - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifdef CONFIG_ZBOOT_ROM - - .section ".start", "ax" - - /* load board-specific initialization code */ -#include - - adr r0, dtb_info - ldmia r0, {r1, r3, r4, r5, r7} - - sub r0, r0, r1 @ calculate the delta offset - add r5, r5, r0 @ _edata - - ldr lr, [r5, #0] @ check if valid DTB is present - cmp lr, r3 - bne 0f - - add r9, r7, #31 @ rounded up to a multiple - bic r9, r9, #31 @ ... of 32 bytes - - add r6, r9, r5 @ copy from _edata - add r9, r9, r4 @ to MEMORY_START - -1: ldmdb r6!, {r0 - r3, r10 - r12, lr} - cmp r6, r5 - stmdb r9!, {r0 - r3, r10 - r12, lr} - bhi 1b - - /* Success: Zero board ID, pointer to start of memory for atag/dtb */ - mov r7, #0 - mov r8, r4 - b 2f - - .align 2 -dtb_info: - .word dtb_info -#ifndef __ARMEB__ - .word 0xedfe0dd0 @ sig is 0xd00dfeed big endian -#else - .word 0xd00dfeed -#endif - .word MEMORY_START - .word _edata - .word 0x4000 @ maximum DTB size -0: - /* Failure: Zero board ID, NULL atag/dtb */ - mov r7, #0 - mov r8, #0 @ pass null pointer as atag -2 : - -#endif /* CONFIG_ZBOOT_ROM */ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 246473a244f6..917aa318929d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -501,11 +501,8 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-smdkv210.dtb \ s5pv210-torbreck.dtb dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ - r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ - r8a7778-bockw-reference.dtb \ - r8a7779-marzen.dtb \ - sh73a0-kzm9g.dtb + r8a7778-bockw-reference.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 3d25dba143a5..4a21c6492dbb 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -17,12 +17,22 @@ }; aliases { + serial0 = &uart0; serial1 = &uart1; stmpe-i2c0 = &stmpe0; stmpe-i2c1 = &stmpe1; }; pinctrl { + uart0 { + uart0_nhk_mode: uart0_mux { + u0_default_mux { + function = "u0"; + groups = "u0txrx_a_1", "u0ctsrts_a_1"; + }; + }; + }; + stmpe2401_1 { stmpe2401_1_nhk_mode: stmpe2401_1_nhk { nhk_cfg1 { @@ -73,6 +83,11 @@ }; i2c0 { + lis3lv02dl@1d { + /* Accelerometer */ + compatible = "st,lis3lv02dl-accel"; + reg = <0x1d>; + }; stmpe0: stmpe2401@43 { compatible = "st,stmpe2401"; reg = <0x43>; @@ -131,22 +146,30 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + /* + * This will turn off SATA so that MMC/SD + * can thrive + */ + mmcsd-gpio { + gpio-hog; + gpios = <2 0x0>; + output-low; + line-name = "SATA EN"; + }; }; }; }; amba { + /* Activate RX/TX and CTS/RTS on UART 0 */ + uart0: uart@101fd000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_nhk_mode>; + status = "okay"; + }; mmcsd: sdi@101f6000 { cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>; wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>; }; }; - - /* Custom board node with GPIO pins to active etc */ - usb-s8815 { - /* This will turn off SATA so that MMC/SD can thrive */ - mmcsd-gpio { - gpios = <&stmpe_gpio44 2 0x1>; - }; - }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 3c140d05f796..35282c0105c6 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -16,9 +16,20 @@ }; aliases { + serial0 = &uart0; serial1 = &uart1; }; + gpio3: gpio@101e7000 { + /* This hog will bias the MMC/SD card detect line */ + mmcsd-gpio { + gpio-hog; + gpios = <16 0x0>; + output-low; + line-name = "card detect bias"; + }; + }; + src@101e0000 { /* These chrystal drivers are not used on this board */ disable-sxtalo; @@ -30,6 +41,15 @@ pinctrl-names = "default"; pinctrl-0 = <&cd_default_mode>; + uart0 { + /* Only use RX/TX pins */ + uart0_s8815_mode: uart0_mux { + u0_default_mux { + function = "u0"; + groups = "u0txrx_a_1"; + }; + }; + }; mmcsd-cd { cd_default_mode: cd_default { cd_default_cfg1 { @@ -85,6 +105,14 @@ }; }; + i2c1 { + lis3lv02dl@1d { + /* Accelerometer */ + compatible = "st,lis3lv02dl-accel"; + reg = <0x1d>; + }; + }; + /* GPIO I2C connected to the USB portions of the STw4811 only */ gpio-i2c { compatible = "i2c-gpio"; @@ -102,21 +130,19 @@ }; - /* Configure card detect for the uSD slot */ amba { + /* Activate RXTX on UART 0 */ + uart0: uart@101fd000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_s8815_mode>; + status = "okay"; + }; + /* Configure card detect for the uSD slot */ mmcsd: sdi@101f6000 { cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; }; }; - /* Custom board node with GPIO pins to active etc */ - usb-s8815 { - /* This will bias the MMC/SD card detect line */ - mmcsd-gpio { - gpios = <&gpio3 16 0x1>; - }; - }; - /* The user LED on the board is set up to be used for heartbeat */ leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index ef794a33b4dc..176e332fc0bd 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -21,6 +21,13 @@ interrupts = <30>; cache-unified; cache-level = <2>; + cache-size = <131072>; + cache-sets = <512>; + cache-line-size = <32>; + /* At full speed latency must be >=2 */ + arm,tag-latency = <2>; + arm,data-latency = <2 2>; + arm,dirty-latency = <2>; }; mtu0: mtu@101e2000 { @@ -97,14 +104,6 @@ pinctrl { compatible = "stericsson,stn8815-pinctrl"; /* Pin configurations */ - uart0 { - uart0_default_mux: uart0_mux { - u0_default_mux { - function = "u0"; - groups = "u0_a_1"; - }; - }; - }; uart1 { uart1_default_mux: uart1_mux { u1_default_mux { @@ -721,11 +720,6 @@ compatible = "st,stw5095"; reg = <0x1a>; }; - lis3lv02dl@1d { - /* Accelerometer */ - compatible = "st,lis3lv02dl-accel"; - reg = <0x1d>; - }; }; amba { @@ -755,8 +749,6 @@ interrupts = <12>; clocks = <&uart0clk>, <&pclkuart0>; clock-names = "uartclk", "apb_pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_default_mux>; status = "disabled"; }; diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 5114b68e99d5..96dabcb6c621 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -91,7 +91,7 @@ void it8152_init_irq(void) for (irq = IT8152_IRQ(0); irq <= IT8152_LAST_IRQ; irq++) { irq_set_chip_and_handler(irq, &it8152_irq_chip, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } } diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index b55c3625d7ee..304adea4bc52 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -138,9 +138,9 @@ static struct locomo_dev_info locomo_devices[] = { }, }; -static void locomo_handler(unsigned int irq, struct irq_desc *desc) +static void locomo_handler(unsigned int __irq, struct irq_desc *desc) { - struct locomo *lchip = irq_get_chip_data(irq); + struct locomo *lchip = irq_desc_get_chip_data(desc); int req, i; /* Acknowledge the parent IRQ */ @@ -150,6 +150,8 @@ static void locomo_handler(unsigned int irq, struct irq_desc *desc) req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00; if (req) { + unsigned int irq; + /* generate the next interrupt(s) */ irq = lchip->irq_base; for (i = 0; i <= 3; i++, irq++) { @@ -205,7 +207,7 @@ static void locomo_setup_irq(struct locomo *lchip) for ( ; irq <= lchip->irq_base + 3; irq++) { irq_set_chip_and_handler(irq, &locomo_chip, handle_level_irq); irq_set_chip_data(irq, lchip); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } } @@ -475,8 +477,7 @@ static void __locomo_remove(struct locomo *lchip) device_for_each_child(lchip->dev, NULL, locomo_remove_child); if (lchip->irq != NO_IRQ) { - irq_set_chained_handler(lchip->irq, NULL); - irq_set_handler_data(lchip->irq, NULL); + irq_set_chained_handler_and_data(lchip->irq, NULL, NULL); } iounmap(lchip->base); diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 93ee70dbbdd3..4f290250fa93 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -197,10 +197,11 @@ static struct sa1111_dev_info sa1111_devices[] = { * will call us again if there are more interrupts to process. */ static void -sa1111_irq_handler(unsigned int irq, struct irq_desc *desc) +sa1111_irq_handler(unsigned int __irq, struct irq_desc *desc) { + unsigned int irq = irq_desc_get_irq(desc); unsigned int stat0, stat1, i; - struct sa1111 *sachip = irq_get_handler_data(irq); + struct sa1111 *sachip = irq_desc_get_handler_data(desc); void __iomem *mapbase = sachip->base + SA1111_INTC; stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0); @@ -486,7 +487,7 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) irq_set_chip_and_handler(irq, &sa1111_low_chip, handle_edge_irq); irq_set_chip_data(irq, sachip); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) { @@ -494,7 +495,7 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) irq_set_chip_and_handler(irq, &sa1111_high_chip, handle_edge_irq); irq_set_chip_data(irq, sachip); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } /* diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig deleted file mode 100644 index 5666e3700a82..000000000000 --- a/arch/arm/configs/armadillo800eva_defconfig +++ /dev/null @@ -1,162 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set -# CONFIG_PID_NS is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_R8A7740=y -CONFIG_MACH_ARMADILLO800EVA=y -# CONFIG_SH_TIMER_TMU is not set -CONFIG_ARM_THUMB=y -CONFIG_CACHE_L2X0=y -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_458693=y -CONFIG_ARM_ERRATA_460075=y -CONFIG_PL310_ERRATA_588369=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_PL310_ERRATA_727915=y -CONFIG_ARM_ERRATA_743622=y -CONFIG_ARM_ERRATA_751472=y -CONFIG_PL310_ERRATA_753970=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_PL310_ERRATA_769419=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_KEXEC=y -CONFIG_VFP=y -CONFIG_NEON=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_MD=y -CONFIG_BLK_DEV_DM=y -CONFIG_NETDEVICES=y -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set -# CONFIG_NET_VENDOR_CIRRUS is not set -# CONFIG_NET_VENDOR_FARADAY is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -CONFIG_SH_ETH=y -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_SMSC is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ST1232=y -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=9 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_GPIO=y -CONFIG_I2C_SH_MOBILE=y -# CONFIG_HWMON is not set -CONFIG_REGULATOR=y -CONFIG_REGULATOR_GPIO=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_DEV=y -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_MT9T112=y -CONFIG_VIDEO_SH_MOBILE_CEU=y -CONFIG_FB=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_FB_SH_MOBILE_HDMI=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_PWM=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_ARM is not set -CONFIG_SND_SOC_SH4_FSI=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_RENESAS_USBHS=y -CONFIG_USB_GADGET=y -CONFIG_USB_RENESAS_USBHS_UDC=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_S35390A=y -CONFIG_DMADEVICES=y -CONFIG_SH_DMAE=y -CONFIG_UIO=y -CONFIG_UIO_PDRV_GENIRQ=y -CONFIG_PWM=y -CONFIG_PWM_RENESAS_TPU=y -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_ARM_UNWIND is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_ANSI_CPRNG=y -CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig deleted file mode 100644 index 23e8d146dc16..000000000000 --- a/arch/arm/configs/kzm9g_defconfig +++ /dev/null @@ -1,154 +0,0 @@ -# CONFIG_ARM_PATCH_PHYS_VIRT is not set -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_NET_NS is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_SH73A0=y -CONFIG_MACH_KZM9G=y -CONFIG_MEMORY_START=0x41000000 -CONFIG_MEMORY_SIZE=0x1f000000 -CONFIG_ARM_ERRATA_743622=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_SMP=y -CONFIG_SCHED_MC=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_HIGHMEM=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_KEXEC=y -CONFIG_VFP=y -CONFIG_NEON=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_IRDA=y -CONFIG_SH_IRDA=y -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_SMSC911X=y -# CONFIG_WLAN is not set -CONFIG_INPUT_SPARSEKMAP=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ST1232=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_ADXL34X=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=9 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_SH_MOBILE=y -CONFIG_GPIO_PCF857X=y -# CONFIG_HWMON is not set -CONFIG_MFD_AS3711=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_AS3711=y -CONFIG_FB=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_BACKLIGHT_AS3711=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_FB_SH_MOBILE_MERAM=y -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_ARM is not set -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=y -CONFIG_SND_SOC_SH4_FSI=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_R8A66597_HCD=y -CONFIG_USB_RENESAS_USBHS=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_RENESAS_USBHS_UDC=y -CONFIG_USB_ETH=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_MMC=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_RS5C372=y -CONFIG_DMADEVICES=y -CONFIG_SH_DMAE=y -CONFIG_ASYNC_TX_DMA=y -CONFIG_STAGING=y -CONFIG_IIO=y -CONFIG_AK8975=y -# CONFIG_DNOTIFY is not set -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_FTRACE is not set -# CONFIG_ARM_UNWIND is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y -CONFIG_CRC16=y diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 350f188c92d2..baf8edebe26f 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -140,7 +140,7 @@ int __init arch_probe_nr_irqs(void) static bool migrate_one_irq(struct irq_desc *desc) { struct irq_data *d = irq_desc_get_irq_data(desc); - const struct cpumask *affinity = d->affinity; + const struct cpumask *affinity = irq_data_get_affinity_mask(d); struct irq_chip *c; bool ret = false; @@ -160,7 +160,7 @@ static bool migrate_one_irq(struct irq_desc *desc) if (!c->irq_set_affinity) pr_debug("IRQ%u: unable to set affinity\n", d->irq); else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret) - cpumask_copy(d->affinity, affinity); + cpumask_copy(irq_data_get_affinity_mask(d), affinity); return ret; } diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c index f90fdf4ce7c7..2e6024334790 100644 --- a/arch/arm/kernel/psci.c +++ b/arch/arm/kernel/psci.c @@ -278,7 +278,7 @@ out_put_node: return err; } -static const struct of_device_id psci_of_match[] __initconst = { +static const struct of_device_id const psci_of_match[] __initconst = { { .compatible = "arm,psci", .data = psci_0_1_init}, { .compatible = "arm,psci-0.2", .data = psci_0_2_init}, {}, diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 172c6a05d27f..e9035cda1485 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -36,29 +36,30 @@ static DEFINE_PER_CPU(bool, percpu_setup_called); static struct clock_event_device __percpu *twd_evt; static int twd_ppi; -static void twd_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) +static int twd_shutdown(struct clock_event_device *clk) { - unsigned long ctrl; + writel_relaxed(0, twd_base + TWD_TIMER_CONTROL); + return 0; +} - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE - | TWD_TIMER_CONTROL_PERIODIC; - writel_relaxed(DIV_ROUND_CLOSEST(twd_timer_rate, HZ), - twd_base + TWD_TIMER_LOAD); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } +static int twd_set_oneshot(struct clock_event_device *clk) +{ + /* period set, and timer enabled in 'next_event' hook */ + writel_relaxed(TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT, + twd_base + TWD_TIMER_CONTROL); + return 0; +} +static int twd_set_periodic(struct clock_event_device *clk) +{ + unsigned long ctrl = TWD_TIMER_CONTROL_ENABLE | + TWD_TIMER_CONTROL_IT_ENABLE | + TWD_TIMER_CONTROL_PERIODIC; + + writel_relaxed(DIV_ROUND_CLOSEST(twd_timer_rate, HZ), + twd_base + TWD_TIMER_LOAD); writel_relaxed(ctrl, twd_base + TWD_TIMER_CONTROL); + return 0; } static int twd_set_next_event(unsigned long evt, @@ -94,7 +95,7 @@ static void twd_timer_stop(void) { struct clock_event_device *clk = raw_cpu_ptr(twd_evt); - twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk); + twd_shutdown(clk); disable_percpu_irq(clk->irq); } @@ -296,7 +297,10 @@ static void twd_timer_setup(void) clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP; clk->rating = 350; - clk->set_mode = twd_set_mode; + clk->set_state_shutdown = twd_shutdown; + clk->set_state_periodic = twd_set_periodic; + clk->set_state_oneshot = twd_set_oneshot; + clk->tick_resume = twd_shutdown; clk->set_next_event = twd_set_next_event; clk->irq = twd_ppi; clk->cpumask = cpumask_of(cpu); diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 685826c4a710..c1a7c6cc00e1 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -37,7 +37,7 @@ static void __init at91rm9200_dt_device_init(void) at91rm9200_pm_init(); } -static const char *at91rm9200_dt_board_compat[] __initconst = { +static const char *const at91rm9200_dt_board_compat[] __initconst = { "atmel,at91rm9200", NULL }; diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c index e47a2093a0e7..7eb64f763034 100644 --- a/arch/arm/mach-at91/at91sam9.c +++ b/arch/arm/mach-at91/at91sam9.c @@ -72,7 +72,7 @@ static void __init at91sam9_dt_device_init(void) at91sam9260_pm_init(); } -static const char *at91_dt_board_compat[] __initconst = { +static const char *const at91_dt_board_compat[] __initconst = { "atmel,at91sam9", NULL }; @@ -89,7 +89,7 @@ static void __init at91sam9g45_dt_device_init(void) at91sam9g45_pm_init(); } -static const char *at91sam9g45_board_compat[] __initconst = { +static const char *const at91sam9g45_board_compat[] __initconst = { "atmel,at91sam9g45", NULL }; @@ -106,7 +106,7 @@ static void __init at91sam9x5_dt_device_init(void) at91sam9x5_pm_init(); } -static const char *at91sam9x5_board_compat[] __initconst = { +static const char *const at91sam9x5_board_compat[] __initconst = { "atmel,at91sam9x5", "atmel,at91sam9n12", NULL diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index e24df77abd79..265ffeb2037e 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -311,7 +311,7 @@ static void at91sam9_sdram_standby(void) at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); } -static const struct of_device_id ramc_ids[] __initconst = { +static const struct of_device_id const ramc_ids[] __initconst = { { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby }, { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby }, { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby }, diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index 41d829d8e7d5..8fc47630bbc8 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -52,7 +52,7 @@ static void __init sama5_dt_device_init(void) at91sam9x5_pm_init(); } -static const char *sama5_dt_board_compat[] __initconst = { +static const char *const sama5_dt_board_compat[] __initconst = { "atmel,sama5", NULL }; @@ -63,7 +63,7 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5") .dt_compat = sama5_dt_board_compat, MACHINE_END -static const char *sama5_alt_dt_board_compat[] __initconst = { +static const char *const sama5_alt_dt_board_compat[] __initconst = { "atmel,sama5d4", NULL }; diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 4fb0da458e91..1780a3ff42f9 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -39,10 +39,8 @@ obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o # BCM63XXx ifeq ($(CONFIG_ARCH_BCM_63XX),y) -CFLAGS_bcm63xx_headsmp.o += -march=armv7-a obj-y += bcm63xx.o -obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_headsmp.o \ - bcm63xx_pmb.o +obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_pmb.o endif ifeq ($(CONFIG_ARCH_BRCMSTB),y) diff --git a/arch/arm/mach-bcm/bcm63xx_headsmp.S b/arch/arm/mach-bcm/bcm63xx_headsmp.S deleted file mode 100644 index c7af397c7f14..000000000000 --- a/arch/arm/mach-bcm/bcm63xx_headsmp.S +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2015, Broadcom Corporation - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -ENTRY(bcm63138_secondary_startup) - ARM_BE8(setend be) - /* - * L1 cache does have unpredictable contents at power-up clean its - * contents without flushing - */ - bl v7_invalidate_l1 - nop - - b secondary_startup -ENDPROC(bcm63138_secondary_startup) diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c index 3f014f18cea5..19be90421f4d 100644 --- a/arch/arm/mach-bcm/bcm63xx_smp.c +++ b/arch/arm/mach-bcm/bcm63xx_smp.c @@ -127,7 +127,7 @@ static int bcm63138_smp_boot_secondary(unsigned int cpu, } /* Locate the secondary CPU node */ - dn = of_get_cpu_node(cpu_logical_map(cpu), NULL); + dn = of_get_cpu_node(cpu, NULL); if (!dn) { pr_err("SMP: failed to locate secondary CPU%d node\n", cpu); ret = -ENODEV; @@ -135,7 +135,7 @@ static int bcm63138_smp_boot_secondary(unsigned int cpu, } /* Write the secondary init routine to the BootLUT reset vector */ - val = virt_to_phys(bcm63138_secondary_startup); + val = virt_to_phys(secondary_startup); writel_relaxed(val, bootlut_base + BOOTLUT_RESET_VECT); /* Power up the core, will jump straight to its reset vector when we diff --git a/arch/arm/mach-bcm/bcm63xx_smp.h b/arch/arm/mach-bcm/bcm63xx_smp.h index 50b76044536e..9c6d50e2b111 100644 --- a/arch/arm/mach-bcm/bcm63xx_smp.h +++ b/arch/arm/mach-bcm/bcm63xx_smp.h @@ -3,7 +3,6 @@ struct device_node; -extern void bcm63138_secondary_startup(void); extern int bcm63xx_pmb_power_on_cpu(struct device_node *dn); #endif /* __BCM63XX_SMP_H */ diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c index 7aef92720eb4..5478fe6bcce6 100644 --- a/arch/arm/mach-bcm/bcm_5301x.c +++ b/arch/arm/mach-bcm/bcm_5301x.c @@ -44,7 +44,7 @@ static void __init bcm5301x_init_early(void) "imprecise external abort"); } -static const char __initconst *bcm5301x_dt_compat[] = { +static const char *const bcm5301x_dt_compat[] __initconst = { "brcm,bcm4708", NULL, }; diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index a55a7ecf146a..cf3f8658f0e5 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -33,7 +33,7 @@ struct bcm_kona_smc_data { unsigned result; }; -static const struct of_device_id bcm_kona_smc_ids[] __initconst = { +static const struct of_device_id const bcm_kona_smc_ids[] __initconst = { {.compatible = "brcm,kona-smc"}, {.compatible = "bcm,kona-smc"}, /* deprecated name */ {}, diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c index 45abf6bd5f68..c3d964221767 100644 --- a/arch/arm/mach-clps711x/board-autcpu12.c +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -160,7 +160,7 @@ static struct platform_device autcpu12_mmgpio_pdev __initdata = { }, }; -static const struct gpio autcpu12_gpios[] __initconst = { +static const struct gpio const autcpu12_gpios[] __initconst = { { AUTCPU12_DPOT_CS, GPIOF_OUT_INIT_HIGH, "DPOT CS" }, { AUTCPU12_DPOT_CLK, GPIOF_OUT_INIT_LOW, "DPOT CLK" }, { AUTCPU12_DPOT_UD, GPIOF_OUT_INIT_LOW, "DPOT UD" }, diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 4e9837ded96d..9b1dc223d8d3 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -113,30 +113,33 @@ void cns3xxx_power_off(void) */ static void __iomem *cns3xxx_tmr1; -static void cns3xxx_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) +static int cns3xxx_shutdown(struct clock_event_device *clk) +{ + writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + return 0; +} + +static int cns3xxx_set_oneshot(struct clock_event_device *clk) +{ + unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + + /* period set, and timer enabled in 'next_event' hook */ + ctrl |= (1 << 2) | (1 << 9); + writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + return 0; +} + +static int cns3xxx_set_periodic(struct clock_event_device *clk) { unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); int pclk = cns3xxx_cpu_clock() / 8; int reload; - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - reload = pclk * 20 / (3 * HZ) * 0x25000; - writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); - ctrl |= (1 << 0) | (1 << 2) | (1 << 9); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl |= (1 << 2) | (1 << 9); - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } - + reload = pclk * 20 / (3 * HZ) * 0x25000; + writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); + ctrl |= (1 << 0) | (1 << 2) | (1 << 9); writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + return 0; } static int cns3xxx_timer_set_next_event(unsigned long evt, @@ -151,12 +154,16 @@ static int cns3xxx_timer_set_next_event(unsigned long evt, } static struct clock_event_device cns3xxx_tmr1_clockevent = { - .name = "cns3xxx timer1", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = cns3xxx_timer_set_mode, - .set_next_event = cns3xxx_timer_set_next_event, - .rating = 350, - .cpumask = cpu_all_mask, + .name = "cns3xxx timer1", + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = cns3xxx_shutdown, + .set_state_periodic = cns3xxx_set_periodic, + .set_state_oneshot = cns3xxx_set_oneshot, + .tick_resume = cns3xxx_shutdown, + .set_next_event = cns3xxx_timer_set_next_event, + .rating = 350, + .cpumask = cpu_all_mask, }; static void __init cns3xxx_clockevents_init(unsigned int timer_irq) @@ -339,7 +346,7 @@ static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = { .power_off = csn3xxx_usb_power_off, }; -static struct of_dev_auxdata cns3xxx_auxdata[] __initconst = { +static const struct of_dev_auxdata const cns3xxx_auxdata[] __initconst = { { "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata }, { "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata }, { "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL }, @@ -392,7 +399,7 @@ static void __init cns3xxx_init(void) cns3xxx_auxdata, NULL); } -static const char *cns3xxx_dt_compat[] __initdata = { +static const char *const cns3xxx_dt_compat[] __initconst = { "cavium,cns3410", "cavium,cns3420", NULL, diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index 006dae8dfe44..bf12ce64407a 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -112,7 +112,7 @@ static int cp_intc_host_map(struct irq_domain *h, unsigned int virq, pr_debug("cp_intc_host_map(%d, 0x%lx)\n", virq, hw); irq_set_chip(virq, &cp_intc_irq_chip); - set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + irq_set_probe(virq); irq_set_handler(virq, handle_edge_irq); return 0; } diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 3b8740c083c4..676997895e13 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -715,7 +715,7 @@ const short da850_lcdcntl_pins[] __initconst = { -1 }; -const short da850_vpif_capture_pins[] __initdata = { +const short da850_vpif_capture_pins[] __initconst = { DA850_VPIF_DIN0, DA850_VPIF_DIN1, DA850_VPIF_DIN2, DA850_VPIF_DIN3, DA850_VPIF_DIN4, DA850_VPIF_DIN5, DA850_VPIF_DIN6, DA850_VPIF_DIN7, DA850_VPIF_DIN8, DA850_VPIF_DIN9, DA850_VPIF_DIN10, DA850_VPIF_DIN11, @@ -725,7 +725,7 @@ const short da850_vpif_capture_pins[] __initdata = { -1 }; -const short da850_vpif_display_pins[] __initdata = { +const short da850_vpif_display_pins[] __initconst = { DA850_VPIF_DOUT0, DA850_VPIF_DOUT1, DA850_VPIF_DOUT2, DA850_VPIF_DOUT3, DA850_VPIF_DOUT4, DA850_VPIF_DOUT5, DA850_VPIF_DOUT6, DA850_VPIF_DOUT7, DA850_VPIF_DOUT8, DA850_VPIF_DOUT9, DA850_VPIF_DOUT10, diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index 438f68547f4c..06b6451225c1 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -20,7 +20,7 @@ #define DA8XX_NUM_UARTS 3 -static const struct of_device_id da8xx_irq_match[] __initconst = { +static const struct of_device_id const da8xx_irq_match[] __initconst = { { .compatible = "ti,cp-intc", .data = cp_intc_of_init, }, { } }; @@ -59,7 +59,7 @@ static void __init da850_init_machine(void) } -static const char *da850_boards_compat[] __initdata = { +static const char *const da850_boards_compat[] __initconst = { "enbw,cmc", "ti,da850-evm", "ti,da850", diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 160c9602f490..6c18445a4639 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -303,36 +303,42 @@ static int davinci_set_next_event(unsigned long cycles, return 0; } -static void davinci_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +static int davinci_shutdown(struct clock_event_device *evt) { struct timer_s *t = &timers[TID_CLOCKEVENT]; - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - t->period = davinci_clock_tick_rate / (HZ); - t->opts &= ~TIMER_OPTS_STATE_MASK; - t->opts |= TIMER_OPTS_PERIODIC; - timer32_config(t); - break; - case CLOCK_EVT_MODE_ONESHOT: - t->opts &= ~TIMER_OPTS_STATE_MASK; - t->opts |= TIMER_OPTS_ONESHOT; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - t->opts &= ~TIMER_OPTS_STATE_MASK; - t->opts |= TIMER_OPTS_DISABLED; - break; - case CLOCK_EVT_MODE_RESUME: - break; - } + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_DISABLED; + return 0; +} + +static int davinci_set_oneshot(struct clock_event_device *evt) +{ + struct timer_s *t = &timers[TID_CLOCKEVENT]; + + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_ONESHOT; + return 0; +} + +static int davinci_set_periodic(struct clock_event_device *evt) +{ + struct timer_s *t = &timers[TID_CLOCKEVENT]; + + t->period = davinci_clock_tick_rate / (HZ); + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_PERIODIC; + timer32_config(t); + return 0; } static struct clock_event_device clockevent_davinci = { - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = davinci_set_next_event, - .set_mode = davinci_set_mode, + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = davinci_set_next_event, + .set_state_shutdown = davinci_shutdown, + .set_state_periodic = davinci_set_periodic, + .set_state_oneshot = davinci_set_oneshot, }; diff --git a/arch/arm/mach-digicolor/digicolor.c b/arch/arm/mach-digicolor/digicolor.c index cfc88d1caa47..4d62f1bde4ed 100644 --- a/arch/arm/mach-digicolor/digicolor.c +++ b/arch/arm/mach-digicolor/digicolor.c @@ -8,7 +8,7 @@ #include -static const char *digicolor_dt_compat[] __initconst = { +static const char *const digicolor_dt_compat[] __initconst = { "cnxt,cx92755", NULL, }; diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index df0223f76fa9..305d7c6242bb 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -69,8 +69,9 @@ static struct irq_chip pmu_irq_chip = { .irq_ack = pmu_irq_ack, }; -static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc) +static void pmu_irq_handler(unsigned int __irq, struct irq_desc *desc) { + unsigned int irq = irq_desc_get_irq(desc); unsigned long cause = readl(PMU_INTERRUPT_CAUSE); cause &= readl(PMU_INTERRUPT_MASK); @@ -172,7 +173,7 @@ void __init dove_init_irq(void) for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) { irq_set_chip_and_handler(i, &pmu_irq_chip, handle_level_irq); irq_set_status_flags(i, IRQ_LEVEL); - set_irq_flags(i, IRQF_VALID); + irq_clear_status_flags(i, IRQ_NOREQUEST); } irq_set_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler); } diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 8254e716b095..688e5fed49a7 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -65,7 +65,7 @@ static void __init ebsa110_init_irq(void) for (irq = 0; irq < NR_IRQS; irq++) { irq_set_chip_and_handler(irq, &ebsa110_irq_chip, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } } diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index bec570ae6494..61a75ca3684e 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -15,45 +15,8 @@ config CRUNCH comment "EP93xx Platforms" -choice - prompt "EP93xx first SDRAM bank selection" - default EP93XX_SDCE3_SYNC_PHYS_OFFSET - -config EP93XX_SDCE3_SYNC_PHYS_OFFSET - bool "0x00000000 - SDCE3/SyncBoot" - help - Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0x00000000. - -config EP93XX_SDCE0_PHYS_OFFSET - bool "0xc0000000 - SDCEO" - help - Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0xc0000000. - -config EP93XX_SDCE1_PHYS_OFFSET - bool "0xd0000000 - SDCE1" - help - Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0xd0000000. - -config EP93XX_SDCE2_PHYS_OFFSET - bool "0xe0000000 - SDCE2" - help - Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0xe0000000. - -config EP93XX_SDCE3_ASYNC_PHYS_OFFSET - bool "0xf0000000 - SDCE3/AsyncBoot" - help - Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0xf0000000. - -endchoice - config MACH_ADSSPHERE bool "Support ADS Sphere" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the ADS Sphere board. @@ -63,7 +26,6 @@ config MACH_EDB93XX config MACH_EDB9301 bool "Support Cirrus Logic EDB9301" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -71,7 +33,6 @@ config MACH_EDB9301 config MACH_EDB9302 bool "Support Cirrus Logic EDB9302" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -79,7 +40,6 @@ config MACH_EDB9302 config MACH_EDB9302A bool "Support Cirrus Logic EDB9302A" - depends on EP93XX_SDCE0_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -87,7 +47,6 @@ config MACH_EDB9302A config MACH_EDB9307 bool "Support Cirrus Logic EDB9307" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -95,7 +54,6 @@ config MACH_EDB9307 config MACH_EDB9307A bool "Support Cirrus Logic EDB9307A" - depends on EP93XX_SDCE0_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -103,7 +61,6 @@ config MACH_EDB9307A config MACH_EDB9312 bool "Support Cirrus Logic EDB9312" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -111,7 +68,6 @@ config MACH_EDB9312 config MACH_EDB9315 bool "Support Cirrus Logic EDB9315" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -119,14 +75,12 @@ config MACH_EDB9315 config MACH_EDB9315A bool "Support Cirrus Logic EDB9315A" - depends on EP93XX_SDCE0_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9315A Evaluation Board. config MACH_GESBC9312 - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET bool "Support Glomation GESBC-9312-sx" help Say 'Y' here if you want your kernel to support the Glomation @@ -137,7 +91,6 @@ config MACH_MICRO9 config MACH_MICRO9H bool "Support Contec Micro9-High" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the @@ -145,7 +98,6 @@ config MACH_MICRO9H config MACH_MICRO9M bool "Support Contec Micro9-Mid" - depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the @@ -153,7 +105,6 @@ config MACH_MICRO9M config MACH_MICRO9L bool "Support Contec Micro9-Lite" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the @@ -161,7 +112,6 @@ config MACH_MICRO9L config MACH_MICRO9S bool "Support Contec Micro9-Slim" - depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the @@ -169,28 +119,24 @@ config MACH_MICRO9S config MACH_SIM_ONE bool "Support Simplemachines Sim.One board" - depends on EP93XX_SDCE0_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Simplemachines Sim.One board. config MACH_SNAPPER_CL15 bool "Support Bluewater Systems Snapper CL15 Module" - depends on EP93XX_SDCE0_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Bluewater Systems Snapper CL15 Module. config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Technologic Systems TS-72xx board. config MACH_VISION_EP9307 bool "Support Vision Engraving Systems EP9307 SoM" - depends on EP93XX_SDCE0_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM. diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 78d427b34b1f..b7ae4345ac08 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o +obj-y := core.o clock.o timer-ep93xx.o obj-$(CONFIG_EP93XX_DMA) += dma.o diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot index d3113a71cb40..ed82ed7c949f 100644 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -1,14 +1 @@ - zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) += 0x00008000 -params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100 - - zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) += 0xc0008000 -params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100 - - zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) += 0xd0008000 -params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100 - - zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) += 0xe0008000 -params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100 - - zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) += 0xf0008000 -params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100 +# Empty file waiting for deletion once Makefile.boot isn't needed any more. diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 0e571f1749d6..c393b1b0310d 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -38,6 +37,7 @@ #include #include #include +#include #include #include @@ -47,7 +47,6 @@ #include #include -#include #include "soc.h" @@ -73,113 +72,6 @@ void __init ep93xx_map_io(void) iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc)); } - -/************************************************************************* - * Timer handling for EP93xx - ************************************************************************* - * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and - * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate - * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, - * is free-running, and can't generate interrupts. - * - * The 508 kHz timers are ideal for use for the timer interrupt, as the - * most common values of HZ divide 508 kHz nicely. We pick one of the 16 - * bit timers (timer 1) since we don't need more than 16 bits of reload - * value as long as HZ >= 8. - * - * The higher clock rate of timer 4 makes it a better choice than the - * other timers for use in gettimeoffset(), while the fact that it can't - * generate interrupts means we don't have to worry about not being able - * to use this timer for something else. We also use timer 4 for keeping - * track of lost jiffies. - */ -#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) -#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) -#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) -#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08) -#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7) -#define EP93XX_TIMER123_CONTROL_MODE (1 << 6) -#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3) -#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c) -#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20) -#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24) -#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28) -#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c) -#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60) -#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64) -#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8) -#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80) -#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84) -#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) -#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) - -#define EP93XX_TIMER123_CLOCK 508469 -#define EP93XX_TIMER4_CLOCK 983040 - -#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1) -#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ) - -static unsigned int last_jiffy_time; - -static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) -{ - /* Writing any value clears the timer interrupt */ - __raw_writel(1, EP93XX_TIMER1_CLEAR); - - /* Recover lost jiffies */ - while ((signed long) - (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time) - >= TIMER4_TICKS_PER_JIFFY) { - last_jiffy_time += TIMER4_TICKS_PER_JIFFY; - timer_tick(); - } - - return IRQ_HANDLED; -} - -static struct irqaction ep93xx_timer_irq = { - .name = "ep93xx timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = ep93xx_timer_interrupt, -}; - -static u32 ep93xx_gettimeoffset(void) -{ - int offset; - - offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time; - - /* - * Timer 4 is based on a 983.04 kHz reference clock, - * so dividing by 983040 gives the fraction of a second, - * so dividing by 0.983040 converts to uS. - * Refactor the calculation to avoid overflow. - * Finally, multiply by 1000 to give nS. - */ - return (offset + (53 * offset / 3072)) * 1000; -} - -void __init ep93xx_timer_init(void) -{ - u32 tmode = EP93XX_TIMER123_CONTROL_MODE | - EP93XX_TIMER123_CONTROL_CLKSEL; - - arch_gettimeoffset = ep93xx_gettimeoffset; - - /* Enable periodic HZ timer. */ - __raw_writel(tmode, EP93XX_TIMER1_CONTROL); - __raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD); - __raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE, - EP93XX_TIMER1_CONTROL); - - /* Enable lost jiffy timer. */ - __raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, - EP93XX_TIMER4_VALUE_HIGH); - - setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq); -} - - /************************************************************************* * EP93xx IRQ handling *************************************************************************/ @@ -971,6 +863,12 @@ static const char __init *ep93xx_get_soc_id(void) if (id != id2) return "invalid"; + /* Toss the unique ID into the entropy pool */ + add_device_randomness(&id2, 4); + add_device_randomness(&id3, 4); + add_device_randomness(&id4, 4); + add_device_randomness(&id5, 4); + snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id), "%08x%08x%08x%08x", id2, id3, id4, id5); diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 27b14ae92c7e..ad92d9f7e4df 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -205,8 +205,6 @@ static void __init edb93xx_register_pwm(void) * EDB93xx framebuffer *************************************************************************/ static struct ep93xxfb_mach_info __initdata edb93xxfb_info = { - .num_modes = EP93XXFB_USE_MODEDB, - .bpp = 16, .flags = 0, }; diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 3c950f5864f3..7bb540c421ee 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -40,8 +40,6 @@ static struct ep93xx_eth_data __initdata simone_eth_data = { }; static struct ep93xxfb_mach_info __initdata simone_fb_info = { - .num_modes = EP93XXFB_USE_MODEDB, - .bpp = 16, .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, }; @@ -169,6 +167,7 @@ static struct spi_board_info simone_spi_devices[] __initdata = { static struct ep93xx_spi_info simone_spi_info __initdata = { .num_chipselect = ARRAY_SIZE(simone_spi_devices), + .use_dma = 1, }; static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = { diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index aa86f86638dd..c4904264256a 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -144,8 +144,6 @@ static struct i2c_board_info __initdata snappercl15_i2c_data[] = { }; static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = { - .num_modes = EP93XXFB_USE_MODEDB, - .bpp = 16, }; static struct platform_device snappercl15_audio_device = { diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c new file mode 100644 index 000000000000..e5f791145bd0 --- /dev/null +++ b/arch/arm/mach-ep93xx/timer-ep93xx.c @@ -0,0 +1,143 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "soc.h" + +/************************************************************************* + * Timer handling for EP93xx + ************************************************************************* + * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and + * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate + * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, + * is free-running, and can't generate interrupts. + * + * The 508 kHz timers are ideal for use for the timer interrupt, as the + * most common values of HZ divide 508 kHz nicely. We pick the 32 bit + * timer (timer 3) to get as long sleep intervals as possible when using + * CONFIG_NO_HZ. + * + * The higher clock rate of timer 4 makes it a better choice than the + * other timers for use as clock source and for sched_clock(), providing + * a stable 40 bit time base. + ************************************************************************* + */ +#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) +#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) +#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) +#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08) +#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7) +#define EP93XX_TIMER123_CONTROL_MODE (1 << 6) +#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3) +#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c) +#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20) +#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24) +#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28) +#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c) +#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60) +#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64) +#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8) +#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80) +#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84) +#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) +#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) + +#define EP93XX_TIMER123_RATE 508469 +#define EP93XX_TIMER4_RATE 983040 + +static u64 notrace ep93xx_read_sched_clock(void) +{ + u64 ret; + + ret = readl(EP93XX_TIMER4_VALUE_LOW); + ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32); + return ret; +} + +cycle_t ep93xx_clocksource_read(struct clocksource *c) +{ + u64 ret; + + ret = readl(EP93XX_TIMER4_VALUE_LOW); + ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32); + return (cycle_t) ret; +} + +static int ep93xx_clkevt_set_next_event(unsigned long next, + struct clock_event_device *evt) +{ + /* Default mode: periodic, off, 508 kHz */ + u32 tmode = EP93XX_TIMER123_CONTROL_MODE | + EP93XX_TIMER123_CONTROL_CLKSEL; + + /* Clear timer */ + writel(tmode, EP93XX_TIMER3_CONTROL); + + /* Set next event */ + writel(next, EP93XX_TIMER3_LOAD); + writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE, + EP93XX_TIMER3_CONTROL); + return 0; +} + + +static int ep93xx_clkevt_shutdown(struct clock_event_device *evt) +{ + /* Disable timer */ + writel(0, EP93XX_TIMER3_CONTROL); + + return 0; +} + +static struct clock_event_device ep93xx_clockevent = { + .name = "timer1", + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = ep93xx_clkevt_shutdown, + .set_state_oneshot = ep93xx_clkevt_shutdown, + .tick_resume = ep93xx_clkevt_shutdown, + .set_next_event = ep93xx_clkevt_set_next_event, + .rating = 300, +}; + +static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* Writing any value clears the timer interrupt */ + writel(1, EP93XX_TIMER3_CLEAR); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction ep93xx_timer_irq = { + .name = "ep93xx timer", + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = ep93xx_timer_interrupt, + .dev_id = &ep93xx_clockevent, +}; + +void __init ep93xx_timer_init(void) +{ + /* Enable and register clocksource and sched_clock on timer 4 */ + writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, + EP93XX_TIMER4_VALUE_HIGH); + clocksource_mmio_init(NULL, "timer4", + EP93XX_TIMER4_RATE, 200, 40, + ep93xx_clocksource_read); + sched_clock_register(ep93xx_read_sched_clock, 40, + EP93XX_TIMER4_RATE); + + /* Set up clockevent on timer 3 */ + setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq); + clockevents_config_and_register(&ep93xx_clockevent, + EP93XX_TIMER123_RATE, + 1, + 0xffffffffU); +} diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 6bc1c181581d..5cced5988498 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -29,6 +29,8 @@ #include #include +#include + #include #include #include @@ -104,8 +106,6 @@ static void vision_lcd_blank(int blank_mode, struct fb_info *info) } static struct ep93xxfb_mach_info ep93xxfb_info __initdata = { - .num_modes = EP93XXFB_USE_MODEDB, - .bpp = 16, .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, .setup = vision_lcd_setup, .teardown = vision_lcd_teardown, @@ -168,6 +168,35 @@ static struct i2c_board_info vision_i2c_info[] __initdata = { }, }; +/************************************************************************* + * SPI CS4271 Audio Codec + *************************************************************************/ +static struct cs4271_platform_data vision_cs4271_data = { + .gpio_nreset = EP93XX_GPIO_LINE_H(2), +}; + +static int vision_cs4271_hw_setup(struct spi_device *spi) +{ + return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6, + GPIOF_OUT_INIT_HIGH, spi->modalias); +} + +static void vision_cs4271_hw_cleanup(struct spi_device *spi) +{ + gpio_free(EP93XX_GPIO_LINE_EGPIO6); +} + +static void vision_cs4271_hw_cs_control(struct spi_device *spi, int value) +{ + gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value); +} + +static struct ep93xx_spi_chip_ops vision_cs4271_hw = { + .setup = vision_cs4271_hw_setup, + .cleanup = vision_cs4271_hw_cleanup, + .cs_control = vision_cs4271_hw_cs_control, +}; + /************************************************************************* * SPI Flash *************************************************************************/ @@ -262,12 +291,20 @@ static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = { *************************************************************************/ static struct spi_board_info vision_spi_board_info[] __initdata = { { + .modalias = "cs4271", + .platform_data = &vision_cs4271_data, + .controller_data = &vision_cs4271_hw, + .max_speed_hz = 6000000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_3, + }, { .modalias = "sst25l", .platform_data = &vision_spi_flash_data, .controller_data = &vision_spi_flash_hw, .max_speed_hz = 20000000, .bus_num = 0, - .chip_select = 0, + .chip_select = 1, .mode = SPI_MODE_3, }, { .modalias = "mmc_spi", @@ -275,15 +312,30 @@ static struct spi_board_info vision_spi_board_info[] __initdata = { .controller_data = &vision_spi_mmc_hw, .max_speed_hz = 20000000, .bus_num = 0, - .chip_select = 1, + .chip_select = 2, .mode = SPI_MODE_3, }, }; static struct ep93xx_spi_info vision_spi_master __initdata = { - .num_chipselect = ARRAY_SIZE(vision_spi_board_info), + .num_chipselect = ARRAY_SIZE(vision_spi_board_info), + .use_dma = 1, }; +/************************************************************************* + * I2S Audio + *************************************************************************/ +static struct platform_device vision_audio_device = { + .name = "edb93xx-audio", + .id = -1, +}; + +static void __init vision_register_i2s(void) +{ + ep93xx_register_i2s(); + platform_device_register(&vision_audio_device); +} + /************************************************************************* * Machine Initialization *************************************************************************/ @@ -309,6 +361,7 @@ static void __init vision_init_machine(void) ARRAY_SIZE(vision_i2c_info)); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, ARRAY_SIZE(vision_spi_board_info)); + vision_register_i2s(); } MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 81064cd61a0a..4c4858c566d8 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -30,6 +30,11 @@ menuconfig ARCH_EXYNOS if ARCH_EXYNOS +config S5P_DEV_MFC + bool + help + Compile in setup memory (init) code for MFC + config ARCH_EXYNOS3 bool "SAMSUNG EXYNOS3" select ARM_CPU_SUSPEND if PM diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index bcefb5473ee4..2f306767cdfe 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -23,3 +23,5 @@ AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec) obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o CFLAGS_mcpm-exynos.o += -march=armv7-a + +obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index e3a9256ed55f..153492513c40 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -128,6 +128,12 @@ void exynos_firmware_init(void); /* CPU BOOT mode flag for Exynos3250 SoC bootloader */ #define C2_STATE (1 << 3) +/* + * Magic values for bootloader indicating chosen low power mode. + * See also Documentation/arm/Samsung/Bootloader-interface.txt + */ +#define EXYNOS_SLEEP_MAGIC 0x00000bad +#define EXYNOS_AFTR_MAGIC 0xfcba0d10 void exynos_set_boot_flag(unsigned int cpu, unsigned int mode); void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode); diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 245f6dec1ded..111cfbf66fdb 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -25,8 +25,6 @@ #include "common.h" #include "smc.h" -#define EXYNOS_SLEEP_MAGIC 0x00000bad -#define EXYNOS_AFTR_MAGIC 0xfcba0d10 #define EXYNOS_BOOT_ADDR 0x8 #define EXYNOS_BOOT_FLAG 0xc diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index e812c1c85624..de68938ee6aa 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -698,7 +698,7 @@ static void exynos_power_off(void) ; } -void exynos5420_powerdown_conf(enum sys_powerdown mode) +static void exynos5420_powerdown_conf(enum sys_powerdown mode) { u32 this_cluster; @@ -991,7 +991,6 @@ static int exynos_pmu_probe(struct platform_device *pdev) static struct platform_driver exynos_pmu_driver = { .driver = { .name = "exynos-pmu", - .owner = THIS_MODULE, .of_match_table = exynos_pmu_of_device_ids, }, .probe = exynos_pmu_probe, diff --git a/arch/arm/plat-samsung/include/plat/regs-srom.h b/arch/arm/mach-exynos/regs-srom.h similarity index 96% rename from arch/arm/plat-samsung/include/plat/regs-srom.h rename to arch/arm/mach-exynos/regs-srom.h index 9b6729c81cda..5c4d4427db7b 100644 --- a/arch/arm/plat-samsung/include/plat/regs-srom.h +++ b/arch/arm/mach-exynos/regs-srom.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h - * +/* * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com * diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/mach-exynos/s5p-dev-mfc.c similarity index 100% rename from arch/arm/plat-samsung/s5p-dev-mfc.c rename to arch/arm/mach-exynos/s5p-dev-mfc.c diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index f572219c7a40..e00eb39453a4 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -32,13 +32,11 @@ #include #include -#include #include "common.h" -#include "regs-pmu.h" #include "exynos-pmu.h" - -#define S5P_CHECK_SLEEP 0x00000BAD +#include "regs-pmu.h" +#include "regs-srom.h" #define REG_TABLE_END (-1U) @@ -331,7 +329,7 @@ static void exynos_pm_enter_sleep_mode(void) { /* Set value of power down register for sleep mode */ exynos_sys_powerdown_conf(SYS_SLEEP); - pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1); + pmu_raw_writel(EXYNOS_SLEEP_MAGIC, S5P_INFORM1); } static void exynos_pm_prepare(void) diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 9e8220e38398..0f0c9e040fcc 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -106,7 +106,7 @@ static void __init __fb_init_irq(void) for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) { irq_set_chip_and_handler(irq, &fb_chip, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } } diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index bf7aa7d298e7..810edc78c817 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -57,34 +57,32 @@ static int ckevt_dc21285_set_next_event(unsigned long delta, return 0; } -static void ckevt_dc21285_set_mode(enum clock_event_mode mode, - struct clock_event_device *c) +static int ckevt_dc21285_shutdown(struct clock_event_device *c) { - switch (mode) { - case CLOCK_EVT_MODE_RESUME: - case CLOCK_EVT_MODE_PERIODIC: - *CSR_TIMER1_CLR = 0; - *CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ); - *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | - TIMER_CNTL_DIV16; - break; + *CSR_TIMER1_CNTL = 0; + return 0; +} - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - *CSR_TIMER1_CNTL = 0; - break; - } +static int ckevt_dc21285_set_periodic(struct clock_event_device *c) +{ + *CSR_TIMER1_CLR = 0; + *CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ); + *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | + TIMER_CNTL_DIV16; + return 0; } static struct clock_event_device ckevt_dc21285 = { - .name = "dc21285_timer1", - .features = CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .irq = IRQ_TIMER1, - .set_next_event = ckevt_dc21285_set_next_event, - .set_mode = ckevt_dc21285_set_mode, + .name = "dc21285_timer1", + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .irq = IRQ_TIMER1, + .set_next_event = ckevt_dc21285_set_next_event, + .set_state_shutdown = ckevt_dc21285_shutdown, + .set_state_periodic = ckevt_dc21285_set_periodic, + .set_state_oneshot = ckevt_dc21285_shutdown, + .tick_resume = ckevt_dc21285_set_periodic, }; static irqreturn_t timer1_interrupt(int irq, void *dev_id) @@ -94,7 +92,7 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id) *CSR_TIMER1_CLR = 0; /* Stop the timer if in one-shot mode */ - if (ce->mode == CLOCK_EVT_MODE_ONESHOT) + if (clockevent_state_oneshot(ce)) *CSR_TIMER1_CNTL = 0; ce->event_handler(ce); diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c index c3a0abbc9049..fcd79bc3a3e1 100644 --- a/arch/arm/mach-footbridge/isa-irq.c +++ b/arch/arm/mach-footbridge/isa-irq.c @@ -153,13 +153,13 @@ void __init isa_init_irq(unsigned int host_irq) for (irq = _ISA_IRQ(0); irq < _ISA_IRQ(8); irq++) { irq_set_chip_and_handler(irq, &isa_lo_chip, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } for (irq = _ISA_IRQ(8); irq < _ISA_IRQ(16); irq++) { irq_set_chip_and_handler(irq, &isa_hi_chip, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } request_resource(&ioport_resource, &pic1_resource); @@ -175,8 +175,8 @@ void __init isa_init_irq(unsigned int host_irq) * resistor on this line. */ if (machine_is_netwinder()) - set_irq_flags(_ISA_IRQ(11), IRQF_VALID | - IRQF_PROBE | IRQF_NOAUTOEN); + irq_modify_status(_ISA_IRQ(11), + IRQ_NOREQUEST | IRQ_NOPROBE, IRQ_NOAUTOEN); } } diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c index 3292f2e6ed6f..220333ed741d 100644 --- a/arch/arm/mach-gemini/gpio.c +++ b/arch/arm/mach-gemini/gpio.c @@ -220,7 +220,7 @@ void __init gemini_gpio_init(void) j < GPIO_IRQ_BASE + (i + 1) * 32; j++) { irq_set_chip_and_handler(j, &gpio_irq_chip, handle_edge_irq); - set_irq_flags(j, IRQF_VALID); + irq_clear_status_flags(j, IRQ_NOREQUEST); } irq_set_chained_handler_and_data(IRQ_GPIO(i), gpio_irq_handler, diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h index 98e7b0f286bf..f0390f184742 100644 --- a/arch/arm/mach-gemini/include/mach/hardware.h +++ b/arch/arm/mach-gemini/include/mach/hardware.h @@ -57,9 +57,6 @@ #define GEMINI_USB1_BASE 0x69000000 #define GEMINI_BIG_ENDIAN_BASE 0x80000000 -#define GEMINI_TIMER1_BASE GEMINI_TIMER_BASE -#define GEMINI_TIMER2_BASE (GEMINI_TIMER_BASE + 0x10) -#define GEMINI_TIMER3_BASE (GEMINI_TIMER_BASE + 0x20) /* * UART Clock when System clk is 150MHz diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index 44f50dcb616d..d929b3ff18fd 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -92,7 +92,7 @@ void __init gemini_init_irq(void) } else { irq_set_handler(i, handle_level_irq); } - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE); } /* Disable all interrupts */ diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c index 0a63c4d25b64..f5f18df5aacd 100644 --- a/arch/arm/mach-gemini/time.c +++ b/arch/arm/mach-gemini/time.c @@ -15,93 +15,147 @@ #include #include #include +#include /* * Register definitions for the timers */ -#define TIMER_COUNT(BASE_ADDR) (BASE_ADDR + 0x00) -#define TIMER_LOAD(BASE_ADDR) (BASE_ADDR + 0x04) -#define TIMER_MATCH1(BASE_ADDR) (BASE_ADDR + 0x08) -#define TIMER_MATCH2(BASE_ADDR) (BASE_ADDR + 0x0C) -#define TIMER_CR(BASE_ADDR) (BASE_ADDR + 0x30) -#define TIMER_1_CR_ENABLE (1 << 0) -#define TIMER_1_CR_CLOCK (1 << 1) -#define TIMER_1_CR_INT (1 << 2) -#define TIMER_2_CR_ENABLE (1 << 3) -#define TIMER_2_CR_CLOCK (1 << 4) -#define TIMER_2_CR_INT (1 << 5) -#define TIMER_3_CR_ENABLE (1 << 6) -#define TIMER_3_CR_CLOCK (1 << 7) -#define TIMER_3_CR_INT (1 << 8) +#define TIMER1_BASE GEMINI_TIMER_BASE +#define TIMER2_BASE (GEMINI_TIMER_BASE + 0x10) +#define TIMER3_BASE (GEMINI_TIMER_BASE + 0x20) + +#define TIMER_COUNT(BASE) (IO_ADDRESS(BASE) + 0x00) +#define TIMER_LOAD(BASE) (IO_ADDRESS(BASE) + 0x04) +#define TIMER_MATCH1(BASE) (IO_ADDRESS(BASE) + 0x08) +#define TIMER_MATCH2(BASE) (IO_ADDRESS(BASE) + 0x0C) +#define TIMER_CR (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x30) +#define TIMER_INTR_STATE (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x34) +#define TIMER_INTR_MASK (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x38) + +#define TIMER_1_CR_ENABLE (1 << 0) +#define TIMER_1_CR_CLOCK (1 << 1) +#define TIMER_1_CR_INT (1 << 2) +#define TIMER_2_CR_ENABLE (1 << 3) +#define TIMER_2_CR_CLOCK (1 << 4) +#define TIMER_2_CR_INT (1 << 5) +#define TIMER_3_CR_ENABLE (1 << 6) +#define TIMER_3_CR_CLOCK (1 << 7) +#define TIMER_3_CR_INT (1 << 8) +#define TIMER_1_CR_UPDOWN (1 << 9) +#define TIMER_2_CR_UPDOWN (1 << 10) +#define TIMER_3_CR_UPDOWN (1 << 11) +#define TIMER_DEFAULT_FLAGS (TIMER_1_CR_UPDOWN | \ + TIMER_3_CR_ENABLE | \ + TIMER_3_CR_UPDOWN) + +#define TIMER_1_INT_MATCH1 (1 << 0) +#define TIMER_1_INT_MATCH2 (1 << 1) +#define TIMER_1_INT_OVERFLOW (1 << 2) +#define TIMER_2_INT_MATCH1 (1 << 3) +#define TIMER_2_INT_MATCH2 (1 << 4) +#define TIMER_2_INT_OVERFLOW (1 << 5) +#define TIMER_3_INT_MATCH1 (1 << 6) +#define TIMER_3_INT_MATCH2 (1 << 7) +#define TIMER_3_INT_OVERFLOW (1 << 8) +#define TIMER_INT_ALL_MASK 0x1ff + static unsigned int tick_rate; +static u64 notrace gemini_read_sched_clock(void) +{ + return readl(TIMER_COUNT(TIMER3_BASE)); +} + static int gemini_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { u32 cr; - cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); - - /* This may be overdoing it, feel free to test without this */ - cr &= ~TIMER_2_CR_ENABLE; - cr &= ~TIMER_2_CR_INT; - writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); - - /* Set next event */ - writel(cycles, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE))); - writel(cycles, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE))); - cr |= TIMER_2_CR_ENABLE; - cr |= TIMER_2_CR_INT; - writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); + /* Setup the match register */ + cr = readl(TIMER_COUNT(TIMER1_BASE)); + writel(cr + cycles, TIMER_MATCH1(TIMER1_BASE)); + if (readl(TIMER_COUNT(TIMER1_BASE)) - cr > cycles) + return -ETIME; return 0; } -static void gemini_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +static int gemini_timer_shutdown(struct clock_event_device *evt) +{ + u32 cr; + + /* + * Disable also for oneshot: the set_next() call will arm the timer + * instead. + */ + /* Stop timer and interrupt. */ + cr = readl(TIMER_CR); + cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT); + writel(cr, TIMER_CR); + + /* Setup counter start from 0 */ + writel(0, TIMER_COUNT(TIMER1_BASE)); + writel(0, TIMER_LOAD(TIMER1_BASE)); + + /* enable interrupt */ + cr = readl(TIMER_INTR_MASK); + cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2); + cr |= TIMER_1_INT_MATCH1; + writel(cr, TIMER_INTR_MASK); + + /* start the timer */ + cr = readl(TIMER_CR); + cr |= TIMER_1_CR_ENABLE; + writel(cr, TIMER_CR); + + return 0; +} + +static int gemini_timer_set_periodic(struct clock_event_device *evt) { u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ); u32 cr; - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* Start the timer */ - writel(period, - TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE))); - writel(period, - TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE))); - cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); - cr |= TIMER_2_CR_ENABLE; - cr |= TIMER_2_CR_INT; - writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); - break; - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - /* - * Disable also for oneshot: the set_next() call will - * arm the timer instead. - */ - cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); - cr &= ~TIMER_2_CR_ENABLE; - cr &= ~TIMER_2_CR_INT; - writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); - break; - default: - break; - } + /* Stop timer and interrupt */ + cr = readl(TIMER_CR); + cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT); + writel(cr, TIMER_CR); + + /* Setup timer to fire at 1/HT intervals. */ + cr = 0xffffffff - (period - 1); + writel(cr, TIMER_COUNT(TIMER1_BASE)); + writel(cr, TIMER_LOAD(TIMER1_BASE)); + + /* enable interrupt on overflow */ + cr = readl(TIMER_INTR_MASK); + cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2); + cr |= TIMER_1_INT_OVERFLOW; + writel(cr, TIMER_INTR_MASK); + + /* Start the timer */ + cr = readl(TIMER_CR); + cr |= TIMER_1_CR_ENABLE; + cr |= TIMER_1_CR_INT; + writel(cr, TIMER_CR); + + return 0; } -/* Use TIMER2 as clock event */ +/* Use TIMER1 as clock event */ static struct clock_event_device gemini_clockevent = { - .name = "TIMER2", - .rating = 300, /* Reasonably fast and accurate clock event */ - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = gemini_timer_set_next_event, - .set_mode = gemini_timer_set_mode, + .name = "TIMER1", + /* Reasonably fast and accurate clock event */ + .rating = 300, + .shift = 32, + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = gemini_timer_set_next_event, + .set_state_shutdown = gemini_timer_shutdown, + .set_state_periodic = gemini_timer_set_periodic, + .set_state_oneshot = gemini_timer_shutdown, + .tick_resume = gemini_timer_shutdown, }; /* @@ -151,20 +205,35 @@ void __init gemini_timer_init(void) } /* - * Make irqs happen for the system timer + * Reset the interrupt mask and status */ - setup_irq(IRQ_TIMER2, &gemini_timer_irq); + writel(TIMER_INT_ALL_MASK, TIMER_INTR_MASK); + writel(0, TIMER_INTR_STATE); + writel(TIMER_DEFAULT_FLAGS, TIMER_CR); - /* Enable and use TIMER1 as clock source */ - writel(0xffffffff, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE))); - writel(0xffffffff, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER1_BASE))); - writel(TIMER_1_CR_ENABLE, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); - if (clocksource_mmio_init(TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)), - "TIMER1", tick_rate, 300, 32, - clocksource_mmio_readl_up)) - pr_err("timer: failed to initialize gemini clock source\n"); + /* + * Setup free-running clocksource timer (interrupts + * disabled.) + */ + writel(0, TIMER_COUNT(TIMER3_BASE)); + writel(0, TIMER_LOAD(TIMER3_BASE)); + writel(0, TIMER_MATCH1(TIMER3_BASE)); + writel(0, TIMER_MATCH2(TIMER3_BASE)); + clocksource_mmio_init(TIMER_COUNT(TIMER3_BASE), + "gemini_clocksource", tick_rate, + 300, 32, clocksource_mmio_readl_up); + sched_clock_register(gemini_read_sched_clock, 32, tick_rate); - /* Configure and register the clockevent */ + /* + * Setup clockevent timer (interrupt-driven.) + */ + writel(0, TIMER_COUNT(TIMER1_BASE)); + writel(0, TIMER_LOAD(TIMER1_BASE)); + writel(0, TIMER_MATCH1(TIMER1_BASE)); + writel(0, TIMER_MATCH2(TIMER1_BASE)); + setup_irq(IRQ_TIMER1, &gemini_timer_irq); + gemini_clockevent.cpumask = cpumask_of(0); clockevents_config_and_register(&gemini_clockevent, tick_rate, 1, 0xffffffff); + } diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c index 134377352966..45903be6e7b3 100644 --- a/arch/arm/mach-imx/3ds_debugboard.c +++ b/arch/arm/mach-imx/3ds_debugboard.c @@ -195,7 +195,7 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio) for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); - set_irq_flags(i, IRQF_VALID); + irq_clear_status_flags(i, IRQ_NOREQUEST); } irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW); irq_set_chained_handler(p_irq, mxc_expio_irq_handler); diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c index 074b1a81ba76..08ce20771bb3 100644 --- a/arch/arm/mach-imx/epit.c +++ b/arch/arm/mach-imx/epit.c @@ -57,7 +57,6 @@ #include "hardware.h" static struct clock_event_device clockevent_epit; -static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; static void __iomem *timer_base; @@ -106,8 +105,8 @@ static int epit_set_next_event(unsigned long evt, return 0; } -static void epit_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +/* Left event sources disabled, no more interrupts appear */ +static int epit_shutdown(struct clock_event_device *evt) { unsigned long flags; @@ -120,39 +119,41 @@ static void epit_set_mode(enum clock_event_mode mode, /* Disable interrupt in GPT module */ epit_irq_disable(); - if (mode != clockevent_mode) { - /* Set event time into far-far future */ + /* Clear pending interrupt */ + epit_irq_acknowledge(); - /* Clear pending interrupt */ - epit_irq_acknowledge(); - } - - /* Remember timer mode */ - clockevent_mode = mode; local_irq_restore(flags); - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - printk(KERN_ERR "epit_set_mode: Periodic mode is not " - "supported for i.MX EPIT\n"); - break; - case CLOCK_EVT_MODE_ONESHOT: + return 0; +} + +static int epit_set_oneshot(struct clock_event_device *evt) +{ + unsigned long flags; + + /* + * The timer interrupt generation is disabled at least + * for enough time to call epit_set_next_event() + */ + local_irq_save(flags); + + /* Disable interrupt in GPT module */ + epit_irq_disable(); + + /* Clear pending interrupt, only while switching mode */ + if (!clockevent_state_oneshot(evt)) + epit_irq_acknowledge(); + /* * Do not put overhead of interrupt enable/disable into * epit_set_next_event(), the core has about 4 minutes * to call epit_set_next_event() or shutdown clock after * mode switching */ - local_irq_save(flags); - epit_irq_enable(); - local_irq_restore(flags); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appear */ - break; - } + epit_irq_enable(); + local_irq_restore(flags); + + return 0; } /* @@ -176,11 +177,13 @@ static struct irqaction epit_timer_irq = { }; static struct clock_event_device clockevent_epit = { - .name = "epit", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_mode = epit_set_mode, - .set_next_event = epit_set_next_event, - .rating = 200, + .name = "epit", + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = epit_shutdown, + .tick_resume = epit_shutdown, + .set_state_oneshot = epit_set_oneshot, + .set_next_event = epit_set_next_event, + .rating = 200, }; static int __init epit_clockevent_init(struct clk *timer_clk) diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index 4d4a19099a43..62f3437257f1 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -31,7 +31,7 @@ static void __init imx7d_init_irq(void) irqchip_init(); } -static const char *imx7d_dt_compat[] __initconst = { +static const char *const imx7d_dt_compat[] __initconst = { "fsl,imx7d", NULL, }; diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index d08c37c696f6..2c0853560bd2 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -238,7 +238,7 @@ static void __init mx31ads_init_expio(void) for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); - set_irq_flags(i, IRQF_VALID); + irq_clear_status_flags(i, IRQ_NOREQUEST); } irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4)); irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH); diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c index bc739701c301..623d85a4af2d 100644 --- a/arch/arm/mach-iop13xx/irq.c +++ b/arch/arm/mach-iop13xx/irq.c @@ -233,7 +233,7 @@ void __init iop13xx_init_irq(void) irq_set_chip(i, &iop13xx_irqchip4); irq_set_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE); } iop13xx_msi_init(); diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c index d7ee2789d890..2d1f69a68cbc 100644 --- a/arch/arm/mach-iop32x/irq.c +++ b/arch/arm/mach-iop32x/irq.c @@ -69,6 +69,6 @@ void __init iop32x_init_irq(void) for (i = 0; i < NR_IRQS; i++) { irq_set_chip_and_handler(i, &ext_chip, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE); } } diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c index f7f5d3e451c7..c99ec8d0d285 100644 --- a/arch/arm/mach-iop33x/irq.c +++ b/arch/arm/mach-iop33x/irq.c @@ -113,6 +113,6 @@ void __init iop33x_init_irq(void) irq_set_chip_and_handler(i, (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE); } } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 8537d4c41e34..1cb6f2f02880 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -296,7 +296,7 @@ void __init ixp4xx_init_irq(void) for(i = 0; i < NR_IRQS; i++) { irq_set_chip_and_handler(i, &ixp4xx_irq_chip, handle_level_irq); - set_irq_flags(i, IRQF_VALID); + irq_clear_status_flags(i, IRQ_NOREQUEST); } } @@ -521,43 +521,55 @@ static int ixp4xx_set_next_event(unsigned long evt, return 0; } -static void ixp4xx_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +static int ixp4xx_shutdown(struct clock_event_device *evt) { unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK; - opts = IXP4XX_OST_ENABLE; - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set by 'set next_event' */ - osrt = 0; - opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT; - break; - case CLOCK_EVT_MODE_SHUTDOWN: - opts &= ~IXP4XX_OST_ENABLE; - break; - case CLOCK_EVT_MODE_RESUME: - opts |= IXP4XX_OST_ENABLE; - break; - case CLOCK_EVT_MODE_UNUSED: - default: - osrt = opts = 0; - break; - } + opts &= ~IXP4XX_OST_ENABLE; + *IXP4XX_OSRT1 = osrt | opts; + return 0; +} + +static int ixp4xx_set_oneshot(struct clock_event_device *evt) +{ + unsigned long opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT; + unsigned long osrt = 0; + + /* period set by 'set next_event' */ + *IXP4XX_OSRT1 = osrt | opts; + return 0; +} + +static int ixp4xx_set_periodic(struct clock_event_device *evt) +{ + unsigned long opts = IXP4XX_OST_ENABLE; + unsigned long osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK; *IXP4XX_OSRT1 = osrt | opts; + return 0; +} + +static int ixp4xx_resume(struct clock_event_device *evt) +{ + unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; + unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; + + opts |= IXP4XX_OST_ENABLE; + *IXP4XX_OSRT1 = osrt | opts; + return 0; } static struct clock_event_device clockevent_ixp4xx = { - .name = "ixp4xx timer1", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_mode = ixp4xx_set_mode, - .set_next_event = ixp4xx_set_next_event, + .name = "ixp4xx timer1", + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_state_shutdown = ixp4xx_shutdown, + .set_state_periodic = ixp4xx_set_periodic, + .set_state_oneshot = ixp4xx_set_oneshot, + .tick_resume = ixp4xx_resume, + .set_next_event = ixp4xx_set_next_event, }; static void __init ixp4xx_clockevent_init(void) diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c index 76802aac0f45..31439f2ee21e 100644 --- a/arch/arm/mach-ks8695/irq.c +++ b/arch/arm/mach-ks8695/irq.c @@ -172,6 +172,6 @@ void __init ks8695_init_irq(void) handle_edge_irq); } - set_irq_flags(irq, IRQF_VALID); + irq_clear_status_flags(irq, IRQ_NOREQUEST); } } diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index a197874bf382..18eb0fbd8d82 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -54,28 +54,25 @@ /* Timer0 Timeout Counter Register */ #define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ -static void ks8695_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +static int ks8695_set_periodic(struct clock_event_device *evt) { + u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ); + u32 half = DIV_ROUND_CLOSEST(rate, 2); u32 tmcon; - if (mode == CLOCK_EVT_FEAT_PERIODIC) { - u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ); - u32 half = DIV_ROUND_CLOSEST(rate, 2); + /* Disable timer 1 */ + tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); + tmcon &= ~TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); - /* Disable timer 1 */ - tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); - tmcon &= ~TMCON_T1EN; - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + /* Both registers need to count down */ + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); - /* Both registers need to count down */ - writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); - writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); - - /* Re-enable timer1 */ - tmcon |= TMCON_T1EN; - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); - } + /* Re-enable timer1 */ + tmcon |= TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + return 0; } static int ks8695_set_next_event(unsigned long cycles, @@ -102,11 +99,13 @@ static int ks8695_set_next_event(unsigned long cycles, } static struct clock_event_device clockevent_ks8695 = { - .name = "ks8695_t1tc", - .rating = 300, /* Reasonably fast and accurate clock event */ - .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, - .set_next_event = ks8695_set_next_event, - .set_mode = ks8695_set_mode, + .name = "ks8695_t1tc", + /* Reasonably fast and accurate clock event */ + .rating = 300, + .features = CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_PERIODIC, + .set_next_event = ks8695_set_next_event, + .set_state_periodic = ks8695_set_periodic, }; /* diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index d4f7dc87042b..cce4cef12b6e 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -283,25 +283,25 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type) case IRQ_TYPE_EDGE_RISING: /* Rising edge sensitive */ __lpc32xx_set_irq_type(d->hwirq, 1, 1); - __irq_set_handler_locked(d->irq, handle_edge_irq); + irq_set_handler_locked(d, handle_edge_irq); break; case IRQ_TYPE_EDGE_FALLING: /* Falling edge sensitive */ __lpc32xx_set_irq_type(d->hwirq, 0, 1); - __irq_set_handler_locked(d->irq, handle_edge_irq); + irq_set_handler_locked(d, handle_edge_irq); break; case IRQ_TYPE_LEVEL_LOW: /* Low level sensitive */ __lpc32xx_set_irq_type(d->hwirq, 0, 0); - __irq_set_handler_locked(d->irq, handle_level_irq); + irq_set_handler_locked(d, handle_level_irq); break; case IRQ_TYPE_LEVEL_HIGH: /* High level sensitive */ __lpc32xx_set_irq_type(d->hwirq, 1, 0); - __irq_set_handler_locked(d->irq, handle_level_irq); + irq_set_handler_locked(d, handle_level_irq); break; /* Other modes are not supported */ @@ -434,7 +434,7 @@ void __init lpc32xx_init_irq(void) for (i = 0; i < NR_IRQS; i++) { irq_set_chip_and_handler(i, &lpc32xx_irq_chip, handle_level_irq); - set_irq_flags(i, IRQF_VALID); + irq_clear_status_flags(i, IRQ_NOREQUEST); } /* Set default mappings */ diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 7858d5b6f6ce..77d6b1bab278 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -212,7 +212,7 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = { .dma_filter = pl08x_filter_id, }; -static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { +static const struct of_dev_auxdata const lpc32xx_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL), OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL), OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data), @@ -248,7 +248,7 @@ static void __init lpc3250_machine_init(void) lpc32xx_auxdata_lookup, NULL); } -static char const *lpc32xx_dt_compat[] __initdata = { +static const char *const lpc32xx_dt_compat[] __initconst = { "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240", diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c index 4e5837299c04..ff3499d1fb1a 100644 --- a/arch/arm/mach-lpc32xx/timer.c +++ b/arch/arm/mach-lpc32xx/timer.c @@ -43,36 +43,24 @@ static int lpc32xx_clkevt_next_event(unsigned long delta, return 0; } -static void lpc32xx_clkevt_mode(enum clock_event_mode mode, - struct clock_event_device *dev) +static int lpc32xx_shutdown(struct clock_event_device *evt) { - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - WARN_ON(1); - break; - - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_SHUTDOWN: - /* - * Disable the timer. When using oneshot, we must also - * disable the timer to wait for the first call to - * set_next_event(). - */ - __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - break; - } + /* + * Disable the timer. When using oneshot, we must also + * disable the timer to wait for the first call to + * set_next_event(). + */ + __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + return 0; } static struct clock_event_device lpc32xx_clkevt = { - .name = "lpc32xx_clkevt", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 300, - .set_next_event = lpc32xx_clkevt_next_event, - .set_mode = lpc32xx_clkevt_mode, + .name = "lpc32xx_clkevt", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 300, + .set_next_event = lpc32xx_clkevt_next_event, + .set_state_shutdown = lpc32xx_shutdown, + .set_state_oneshot = lpc32xx_shutdown, }; static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id) diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index b2296c9309b8..6e155f03b83c 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -20,12 +20,12 @@ extern void __init mmp_dt_init_timer(void); -static const char *pxa168_dt_board_compat[] __initdata = { +static const char *const pxa168_dt_board_compat[] __initconst = { "mrvl,pxa168-aspenite", NULL, }; -static const char *pxa910_dt_board_compat[] __initdata = { +static const char *const pxa910_dt_board_compat[] __initconst = { "mrvl,pxa910-dkb", NULL, }; diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index 998c0f533abc..0341359b24a4 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -30,7 +30,7 @@ static void __init mmp_init_time(void) of_clk_init(NULL); } -static const char *mmp2_dt_board_compat[] __initdata = { +static const char *const mmp2_dt_board_compat[] __initconst = { "mrvl,mmp2-brownstone", NULL, }; diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 10bfa03e58d4..dbc697b2fda1 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -124,32 +124,25 @@ static int timer_set_next_event(unsigned long delta, return 0; } -static void timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *dev) +static int timer_set_shutdown(struct clock_event_device *evt) { unsigned long flags; local_irq_save(flags); - switch (mode) { - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - /* disable the matching interrupt */ - __raw_writel(0x00, mmp_timer_base + TMR_IER(0)); - break; - case CLOCK_EVT_MODE_RESUME: - case CLOCK_EVT_MODE_PERIODIC: - break; - } + /* disable the matching interrupt */ + __raw_writel(0x00, mmp_timer_base + TMR_IER(0)); local_irq_restore(flags); + + return 0; } static struct clock_event_device ckevt = { - .name = "clockevent", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = timer_set_next_event, - .set_mode = timer_set_mode, + .name = "clockevent", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_next_event = timer_set_next_event, + .set_state_shutdown = timer_set_shutdown, + .set_state_oneshot = timer_set_shutdown, }; static cycle_t clksrc_read(struct clocksource *cs) diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 4f4e22206ae5..e8fdb9ceedf0 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -415,7 +415,7 @@ static __init int armada_38x_cpuidle_init(void) void __iomem *mpsoc_base; u32 reg; - pr_warn("CPU idle is currently broken on Armada 38x: disabling"); + pr_warn("CPU idle is currently broken on Armada 38x: disabling\n"); return 0; np = of_find_compatible_node(NULL, NULL, @@ -486,7 +486,7 @@ static int __init mvebu_v7_cpu_pm_init(void) */ if (of_machine_is_compatible("marvell,armada380")) { cpu_hotplug_disable(); - pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling"); + pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling\n"); } if (of_machine_is_compatible("marvell,armadaxp")) diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 2e7cec86e50e..f1ea4700efcf 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -282,7 +282,7 @@ static void __init apx4devkit_init(void) #define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13) #define TX28_FEC_nINT MXS_GPIO_NR(4, 5) -static const struct gpio tx28_gpios[] __initconst = { +static const struct gpio const tx28_gpios[] __initconst = { { ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" }, { ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" }, { ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" }, @@ -528,7 +528,7 @@ static void mxs_restart(enum reboot_mode mode, const char *cmd) soft_restart(0); } -static const char *mxs_dt_compat[] __initdata = { +static const char *const mxs_dt_compat[] __initconst = { "fsl,imx28", "fsl,imx23", NULL, diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index db25b0cef3a7..6373e2bff203 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -174,7 +174,7 @@ void __init netx_init_irq(void) for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) { irq_set_chip_and_handler(irq, &netx_hif_chip, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); + irq_clear_status_flags(irq, IRQ_NOREQUEST); } writel(NETX_DPMAS_INT_EN_GLB_EN, NETX_DPMAS_INT_EN); diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 5fb2a590ec17..054a8a61e379 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -34,40 +34,40 @@ #define TIMER_CLOCKEVENT 0 #define TIMER_CLOCKSOURCE 1 -static void netx_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) +static inline void timer_shutdown(struct clock_event_device *evt) { - u32 tmode; - /* disable timer */ writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT)); +} - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); - tmode = NETX_GPIO_COUNTER_CTRL_RST_EN | - NETX_GPIO_COUNTER_CTRL_IRQ_EN | - NETX_GPIO_COUNTER_CTRL_RUN; - break; +static int netx_shutdown(struct clock_event_device *evt) +{ + timer_shutdown(evt); - case CLOCK_EVT_MODE_ONESHOT: - writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); - tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN | - NETX_GPIO_COUNTER_CTRL_RUN; - break; + return 0; +} - default: - WARN(1, "%s: unhandled mode %d\n", __func__, mode); - /* fall through */ - - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - tmode = 0; - break; - } +static int netx_set_oneshot(struct clock_event_device *evt) +{ + u32 tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN; + timer_shutdown(evt); + writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT)); + + return 0; +} + +static int netx_set_periodic(struct clock_event_device *evt) +{ + u32 tmode = NETX_GPIO_COUNTER_CTRL_RST_EN | + NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN; + + timer_shutdown(evt); + writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); + writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT)); + + return 0; } static int netx_set_next_event(unsigned long evt, @@ -81,7 +81,10 @@ static struct clock_event_device netx_clockevent = { .name = "netx-timer" __stringify(TIMER_CLOCKEVENT), .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_next_event = netx_set_next_event, - .set_mode = netx_set_mode, + .set_state_shutdown = netx_shutdown, + .set_state_periodic = netx_set_periodic, + .set_state_oneshot = netx_set_oneshot, + .tick_resume = netx_shutdown, }; /* diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 9bda46f1fab7..0c612d95bd5c 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -26,10 +26,8 @@ #include #include #include -#include #include #include -#include #include #include @@ -109,40 +107,6 @@ static void cpu8815_restart(enum reboot_mode mode, const char *cmd) writel(1, srcbase + 0x18); } -/* - * This GPIO pin turns on a line that is used to detect card insertion - * on this board. - */ -static int __init cpu8815_mmcsd_init(void) -{ - struct device_node *cdbias; - int gpio, err; - - cdbias = of_find_node_by_path("/usb-s8815/mmcsd-gpio"); - if (!cdbias) { - pr_info("could not find MMC/SD card detect bias node\n"); - return 0; - } - gpio = of_get_gpio(cdbias, 0); - if (gpio < 0) { - pr_info("could not obtain MMC/SD card detect bias GPIO\n"); - return 0; - } - err = gpio_request(gpio, "card detect bias"); - if (err) { - pr_info("failed to request card detect bias GPIO %d\n", gpio); - return -ENODEV; - } - err = gpio_direction_output(gpio, 0); - if (err){ - pr_info("failed to set GPIO %d as output, low\n", gpio); - return err; - } - pr_info("enabled USB-S8815 CD bias GPIO %d, low\n", gpio); - return 0; -} -device_initcall(cpu8815_mmcsd_init); - static const char * cpu8815_board_compat[] = { "st,nomadik-nhk-15", "calaosystems,usb-s8815", @@ -150,9 +114,8 @@ static const char * cpu8815_board_compat[] = { }; DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") - /* At full speed latency must be >=2, so 0x249 in low bits */ - .l2c_aux_val = 0x00700249, - .l2c_aux_mask = 0xfe0fefff, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .map_io = cpu8815_map_io, .restart = cpu8815_restart, .dt_compat = cpu8815_board_compat, diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 3c0e42219200..dfec671b1639 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -169,7 +169,7 @@ void omap1510_fpga_init_irq(void) } irq_set_handler(i, handle_edge_irq); - set_irq_flags(i, IRQF_VALID); + irq_clear_status_flags(i, IRQ_NOREQUEST); } /* diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index f4d346fda9da..b11edc8a46f0 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -262,7 +262,7 @@ void __init omap1_init_irq(void) irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j); omap_irq_set_cfg(j, 0, 0, irq_trigger); - set_irq_flags(j, IRQF_VALID); + irq_clear_status_flags(j, IRQ_NOREQUEST); } omap_alloc_gc(irq_banks[i].va, irq_base + i * 32, 32); } diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index a7588cfd0286..524977a31a49 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -124,29 +124,26 @@ static int omap_mpu_set_next_event(unsigned long cycles, return 0; } -static void omap_mpu_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +static int omap_mpu_set_oneshot(struct clock_event_device *evt) { - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - omap_mpu_set_autoreset(0); - break; - case CLOCK_EVT_MODE_ONESHOT: - omap_mpu_timer_stop(0); - omap_mpu_remove_autoreset(0); - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } + omap_mpu_timer_stop(0); + omap_mpu_remove_autoreset(0); + return 0; +} + +static int omap_mpu_set_periodic(struct clock_event_device *evt) +{ + omap_mpu_set_autoreset(0); + return 0; } static struct clock_event_device clockevent_mpu_timer1 = { - .name = "mpu_timer1", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = omap_mpu_set_next_event, - .set_mode = omap_mpu_set_mode, + .name = "mpu_timer1", + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = omap_mpu_set_next_event, + .set_state_periodic = omap_mpu_set_periodic, + .set_state_oneshot = omap_mpu_set_oneshot, }; static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id) diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 36bf174b3fac..0ae6c52a7d70 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -114,29 +114,28 @@ static int omap_32k_timer_set_next_event(unsigned long delta, return 0; } -static void omap_32k_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +static int omap_32k_timer_shutdown(struct clock_event_device *evt) { omap_32k_timer_stop(); + return 0; +} - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD); - break; - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - break; - case CLOCK_EVT_MODE_RESUME: - break; - } +static int omap_32k_timer_set_periodic(struct clock_event_device *evt) +{ + omap_32k_timer_stop(); + omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD); + return 0; } static struct clock_event_device clockevent_32k_timer = { - .name = "32k-timer", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = omap_32k_timer_set_next_event, - .set_mode = omap_32k_timer_set_mode, + .name = "32k-timer", + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = omap_32k_timer_set_next_event, + .set_state_shutdown = omap_32k_timer_shutdown, + .set_state_periodic = omap_32k_timer_set_periodic, + .set_state_oneshot = omap_32k_timer_shutdown, + .tick_resume = omap_32k_timer_shutdown, }; static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4a023e8d1bdb..9e2a68456b81 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -178,26 +178,6 @@ config MACH_OMAP_LDP default y select OMAP_PACKAGE_CBB -config MACH_OMAP3530_LV_SOM - bool "OMAP3 Logic 3530 LV SOM board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - help - Support for the LogicPD OMAP3530 SOM Development kit - for full description please see the products webpage at - http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit - -config MACH_OMAP3_TORPEDO - bool "OMAP3 Logic 35x Torpedo board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - help - Support for the LogicPD OMAP35x Torpedo Development kit - for full description please see the products webpage at - http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit - config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 7892c7d3b6f4..8a7a6065ec21 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -235,9 +235,6 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o -obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o -obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o -obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c deleted file mode 100644 index 6049f60a8813..000000000000 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3logic.c - * - * Copyright (C) 2010 Li-Pro.Net - * Stephan Linz - * - * Copyright (C) 2010-2012 Logic Product Development, Inc. - * Peter Barada - * Ashwin BIhari - * - * Modified from Beagle, EVM, and RX51 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "common.h" -#include "mux.h" -#include "hsmmc.h" -#include "control.h" -#include "common-board-devices.h" -#include "gpmc.h" -#include "gpmc-smsc911x.h" - -#define OMAP3LOGIC_SMSC911X_CS 1 - -#define OMAP3530_LV_SOM_MMC_GPIO_CD 110 -#define OMAP3530_LV_SOM_MMC_GPIO_WP 126 -#define OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ 152 - -#define OMAP3_TORPEDO_MMC_GPIO_CD 127 -#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129 - -static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data omap3logic_vmmc1 = { - .constraints = { - .name = "VMMC1", - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3logic_vmmc1_supply), - .consumer_supplies = omap3logic_vmmc1_supply, -}; - -static struct twl4030_gpio_platform_data omap3logic_gpio_data = { - .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) - | BIT(13) | BIT(15) | BIT(16) | BIT(17), -}; - -static struct twl4030_usb_data omap3logic_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - - -static struct twl4030_platform_data omap3logic_twldata = { - /* platform_data for children goes here */ - .gpio = &omap3logic_gpio_data, - .vmmc1 = &omap3logic_vmmc1, - .usb = &omap3logic_usb_data, -}; - -static int __init omap3logic_i2c_init(void) -{ - omap3_pmic_init("twl4030", &omap3logic_twldata); - return 0; -} - -static struct omap2_hsmmc_info __initdata board_mmc_info[] = { - { - .name = "external", - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - {} /* Terminator */ -}; - -static void __init board_mmc_init(void) -{ - if (machine_is_omap3530_lv_som()) { - /* OMAP3530 LV SOM board */ - board_mmc_info[0].gpio_cd = OMAP3530_LV_SOM_MMC_GPIO_CD; - board_mmc_info[0].gpio_wp = OMAP3530_LV_SOM_MMC_GPIO_WP; - omap_mux_init_signal("gpio_110", OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_126", OMAP_PIN_OUTPUT); - } else if (machine_is_omap3_torpedo()) { - /* OMAP3 Torpedo board */ - board_mmc_info[0].gpio_cd = OMAP3_TORPEDO_MMC_GPIO_CD; - omap_mux_init_signal("gpio_127", OMAP_PIN_OUTPUT); - } else { - /* unsupported board */ - printk(KERN_ERR "%s(): unknown machine type\n", __func__); - return; - } - - omap_hsmmc_init(board_mmc_info); -} - -static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { - .cs = OMAP3LOGIC_SMSC911X_CS, - .gpio_irq = -EINVAL, - .gpio_reset = -EINVAL, -}; - -/* TODO/FIXME (comment by Peter Barada, LogicPD): - * Fix the PBIAS voltage for Torpedo MMC1 pins that - * are used for other needs (IRQs, etc). */ -static void omap3torpedo_fix_pbias_voltage(void) -{ - u16 control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; - u32 reg; - - if (machine_is_omap3_torpedo()) - { - /* Set the bias for the pin */ - reg = omap_ctrl_readl(control_pbias_offset); - - reg &= ~OMAP343X_PBIASLITEPWRDNZ1; - omap_ctrl_writel(reg, control_pbias_offset); - - /* 100ms delay required for PBIAS configuration */ - msleep(100); - - reg |= OMAP343X_PBIASLITEVMODE1; - reg |= OMAP343X_PBIASLITEPWRDNZ1; - omap_ctrl_writel(reg | 0x300, control_pbias_offset); - } -} - -static inline void __init board_smsc911x_init(void) -{ - if (machine_is_omap3530_lv_som()) { - /* OMAP3530 LV SOM board */ - board_smsc911x_data.gpio_irq = - OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ; - omap_mux_init_signal("gpio_152", OMAP_PIN_INPUT); - } else if (machine_is_omap3_torpedo()) { - /* OMAP3 Torpedo board */ - board_smsc911x_data.gpio_irq = OMAP3_TORPEDO_SMSC911X_GPIO_IRQ; - omap_mux_init_signal("gpio_129", OMAP_PIN_INPUT); - } else { - /* unsupported board */ - printk(KERN_ERR "%s(): unknown machine type\n", __func__); - return; - } - - gpmc_smsc911x_init(&board_smsc911x_data); -} - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* mUSB */ - OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static void __init omap3logic_init(void) -{ - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap3torpedo_fix_pbias_voltage(); - omap3logic_i2c_init(); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - board_mmc_init(); - board_smsc911x_init(); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3logic_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END - -MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3logic_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c deleted file mode 100644 index 969e1003dd92..000000000000 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ /dev/null @@ -1,633 +0,0 @@ -/* - * board-omap3pandora.c (Pandora Handheld Console) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "common.h" -#include