phy/marvell: add 88e1121 interface mode support

This patch adds support for RGMII RX/TX delay configuration on marvell 88e1121
and derivatives.  With this patch, PHY_INTERFACE_MODE_RGMII_*ID modes are now
supported on these devices.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Cyril Chemparathy 2010-08-02 09:44:53 +00:00 committed by David S. Miller
parent 66d50d2550
commit c477d0447d
1 changed files with 32 additions and 3 deletions

View File

@ -69,6 +69,12 @@
#define MII_M1111_COPPER 0
#define MII_M1111_FIBER 1
#define MII_88E1121_PHY_MSCR_PAGE 2
#define MII_88E1121_PHY_MSCR_REG 21
#define MII_88E1121_PHY_MSCR_RX_DELAY BIT(5)
#define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4)
#define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4))
#define MII_88E1121_PHY_LED_CTRL 16
#define MII_88E1121_PHY_LED_PAGE 3
#define MII_88E1121_PHY_LED_DEF 0x0030
@ -180,7 +186,30 @@ static int marvell_config_aneg(struct phy_device *phydev)
static int m88e1121_config_aneg(struct phy_device *phydev)
{
int err, temp;
int err, oldpage, mscr;
oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
err = phy_write(phydev, MII_88E1121_PHY_PAGE,
MII_88E1121_PHY_MSCR_PAGE);
if (err < 0)
return err;
mscr = phy_read(phydev, MII_88E1121_PHY_MSCR_REG) &
MII_88E1121_PHY_MSCR_DELAY_MASK;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
mscr |= (MII_88E1121_PHY_MSCR_RX_DELAY |
MII_88E1121_PHY_MSCR_TX_DELAY);
else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
mscr |= MII_88E1121_PHY_MSCR_RX_DELAY;
else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
mscr |= MII_88E1121_PHY_MSCR_TX_DELAY;
err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr);
if (err < 0)
return err;
phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
@ -191,11 +220,11 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
if (err < 0)
return err;
temp = phy_read(phydev, MII_88E1121_PHY_PAGE);
oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
phy_write(phydev, MII_88E1121_PHY_PAGE, temp);
phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
err = genphy_config_aneg(phydev);