ARM64: dts: amlogic: Add Meson GX dtsi from GXBB
Move all non-gxbb specific nodes to a common GX dtsi. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This commit is contained in:
Neil Armstrong
Kevin Hilman
parent
1001354ca3
commit
c328666d58
|
|
@ -0,0 +1,200 @@
|
|||
/*
|
||||
* Copyright (c) 2016 BayLibre, SAS.
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*
|
||||
* Copyright (c) 2016 Endless Computers, Inc.
|
||||
* Author: Carlo Caione <carlo@endlessm.com>
|
||||
*
|
||||
* Copyright (c) 2016 Andreas Färber
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
/ {
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <0x2>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x0>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x1>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu2: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x2>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu3: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x3>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
};
|
||||
|
||||
arm-pmu {
|
||||
compatible = "arm,cortex-a53-pmu";
|
||||
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
||||
};
|
||||
|
||||
psci {
|
||||
compatible = "arm,psci-0.2";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 13
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 14
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 11
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 10
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
};
|
||||
|
||||
xtal: xtal-clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "xtal";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
soc {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
cbus: cbus@c1100000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc1100000 0x0 0x100000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
|
||||
|
||||
uart_A: serial@84c0 {
|
||||
compatible = "amlogic,meson-uart";
|
||||
reg = <0x0 0x84c0 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&xtal>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
gic: interrupt-controller@c4301000 {
|
||||
compatible = "arm,gic-400";
|
||||
reg = <0x0 0xc4301000 0 0x1000>,
|
||||
<0x0 0xc4302000 0 0x2000>,
|
||||
<0x0 0xc4304000 0 0x2000>,
|
||||
<0x0 0xc4306000 0 0x2000>;
|
||||
interrupt-controller;
|
||||
interrupts = <GIC_PPI 9
|
||||
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <0>;
|
||||
};
|
||||
|
||||
aobus: aobus@c8100000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc8100000 0x0 0x100000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
|
||||
|
||||
uart_AO: serial@4c0 {
|
||||
compatible = "amlogic,meson-uart";
|
||||
reg = <0x0 0x004c0 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&xtal>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
periphs: periphs@c8834000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc8834000 0x0 0x2000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
|
||||
};
|
||||
|
||||
|
||||
hiubus: hiubus@c883c000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc883c000 0x0 0x2000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
|
||||
};
|
||||
|
||||
apb: apb@d0000000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xd0000000 0x0 0x200000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -40,9 +40,7 @@
|
|||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include "meson-gx.dtsi"
|
||||
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
|
||||
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
|
||||
#include <dt-bindings/clock/gxbb-clkc.h>
|
||||
|
|
@ -51,56 +49,6 @@
|
|||
|
||||
/ {
|
||||
compatible = "amlogic,meson-gxbb";
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <0x2>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x0>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x1>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu2: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x2>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu3: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x3>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
};
|
||||
|
||||
arm-pmu {
|
||||
compatible = "arm,cortex-a53-pmu";
|
||||
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
||||
};
|
||||
|
||||
psci {
|
||||
compatible = "arm,psci-0.2";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
firmware {
|
||||
sm: secure-monitor {
|
||||
|
|
@ -126,31 +74,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 13
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 14
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 11
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 10
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
};
|
||||
|
||||
xtal: xtal-clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "xtal";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
soc {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
usb0_phy: phy@c0000000 {
|
||||
compatible = "amlogic,meson-gxbb-usb2-phy";
|
||||
#phy-cells = <0>;
|
||||
|
|
@ -170,27 +94,53 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
cbus: cbus@c1100000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc1100000 0x0 0x100000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
|
||||
usb0: usb@c9000000 {
|
||||
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
|
||||
reg = <0x0 0xc9000000 0x0 0x40000>;
|
||||
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
|
||||
clock-names = "otg";
|
||||
phys = <&usb0_phy>;
|
||||
phy-names = "usb2-phy";
|
||||
dr_mode = "host";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1: usb@c9100000 {
|
||||
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
|
||||
reg = <0x0 0xc9100000 0x0 0x40000>;
|
||||
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
|
||||
clock-names = "otg";
|
||||
phys = <&usb1_phy>;
|
||||
phy-names = "usb2-phy";
|
||||
dr_mode = "host";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ethmac: ethernet@c9410000 {
|
||||
compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
|
||||
reg = <0x0 0xc9410000 0x0 0x10000
|
||||
0x0 0xc8834540 0x0 0x4>;
|
||||
interrupts = <0 8 1>;
|
||||
interrupt-names = "macirq";
|
||||
clocks = <&clkc CLKID_ETH>,
|
||||
<&clkc CLKID_FCLK_DIV2>,
|
||||
<&clkc CLKID_MPLL2>;
|
||||
clock-names = "stmmaceth", "clkin0", "clkin1";
|
||||
phy-mode = "rgmii";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cbus {
|
||||
reset: reset-controller@4404 {
|
||||
compatible = "amlogic,meson-gxbb-reset";
|
||||
reg = <0x0 0x04404 0x0 0x20>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
uart_A: serial@84c0 {
|
||||
compatible = "amlogic,meson-uart";
|
||||
reg = <0x0 0x84c0 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&xtal>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart_B: serial@84dc {
|
||||
compatible = "amlogic,meson-uart";
|
||||
reg = <0x0 0x84dc 0x0 0x14>;
|
||||
|
|
@ -274,26 +224,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
gic: interrupt-controller@c4301000 {
|
||||
compatible = "arm,gic-400";
|
||||
reg = <0x0 0xc4301000 0 0x1000>,
|
||||
<0x0 0xc4302000 0 0x2000>,
|
||||
<0x0 0xc4304000 0 0x2000>,
|
||||
<0x0 0xc4306000 0 0x2000>;
|
||||
interrupt-controller;
|
||||
interrupts = <GIC_PPI 9
|
||||
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <0>;
|
||||
};
|
||||
|
||||
aobus: aobus@c8100000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc8100000 0x0 0x100000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
|
||||
|
||||
&aobus {
|
||||
pinctrl_aobus: pinctrl@14 {
|
||||
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
|
||||
#address-cells = <2>;
|
||||
|
|
@ -367,14 +298,6 @@
|
|||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
uart_AO: serial@4c0 {
|
||||
compatible = "amlogic,meson-uart";
|
||||
reg = <0x0 0x004c0 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&xtal>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ir: ir@580 {
|
||||
compatible = "amlogic,meson-gxbb-ir";
|
||||
reg = <0x0 0x00580 0x0 0x40>;
|
||||
|
|
@ -400,13 +323,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
periphs: periphs@c8834000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc8834000 0x0 0x2000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
|
||||
|
||||
&periphs {
|
||||
rng {
|
||||
compatible = "amlogic,meson-rng";
|
||||
reg = <0x0 0x0 0x0 0x4>;
|
||||
|
|
@ -597,13 +514,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
hiubus: hiubus@c883c000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc883c000 0x0 0x2000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
|
||||
|
||||
&hiubus {
|
||||
clkc: clock-controller@0 {
|
||||
compatible = "amlogic,gxbb-clkc";
|
||||
#clock-cells = <1>;
|
||||
|
|
@ -619,51 +530,3 @@
|
|||
#mbox-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
apb: apb@d0000000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xd0000000 0x0 0x200000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
|
||||
};
|
||||
|
||||
usb0: usb@c9000000 {
|
||||
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
|
||||
reg = <0x0 0xc9000000 0x0 0x40000>;
|
||||
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
|
||||
clock-names = "otg";
|
||||
phys = <&usb0_phy>;
|
||||
phy-names = "usb2-phy";
|
||||
dr_mode = "host";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1: usb@c9100000 {
|
||||
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
|
||||
reg = <0x0 0xc9100000 0x0 0x40000>;
|
||||
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
|
||||
clock-names = "otg";
|
||||
phys = <&usb1_phy>;
|
||||
phy-names = "usb2-phy";
|
||||
dr_mode = "host";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ethmac: ethernet@c9410000 {
|
||||
compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
|
||||
reg = <0x0 0xc9410000 0x0 0x10000
|
||||
0x0 0xc8834540 0x0 0x4>;
|
||||
interrupts = <0 8 1>;
|
||||
interrupt-names = "macirq";
|
||||
clocks = <&clkc CLKID_ETH>,
|
||||
<&clkc CLKID_FCLK_DIV2>,
|
||||
<&clkc CLKID_MPLL2>;
|
||||
clock-names = "stmmaceth", "clkin0", "clkin1";
|
||||
phy-mode = "rgmii";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue