diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index eb2f5986e1eb..60953d6c919d 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.15 - July 1st, 2007 + Version 0.16 + August 2nd, 2007 Borislav Deianov Henrique de Moraes Holschuh @@ -161,20 +161,22 @@ system. Enabling the hotkey functionality of thinkpad-acpi signals the firmware that such a driver is present, and modifies how the ThinkPad firmware will behave in many situations. +The driver enables the hot key feature automatically when loaded. The +feature can later be disabled and enabled back at runtime. The driver +will also restore the hot key feature to its previous state and mask +when it is unloaded. + When the hotkey feature is enabled and the hot key mask is set (see -below), the various hot keys either generate ACPI events in the -following format: +below), the driver will report HKEY events in the following format: ibm/hotkey HKEY 00000080 0000xxxx -or events over the input layer. The input layer support accepts the -standard IOCTLs to remap the keycodes assigned to each hotkey. +Some of these events refer to hot key presses, but not all. -When the input device is open, the driver will suppress any ACPI hot key -events that get translated into a meaningful input layer event, in order -to avoid sending duplicate events to userspace. Hot keys that are -mapped to KEY_RESERVED in the keymap are not translated, and will always -generate an ACPI ibm/hotkey HKEY event, and no input layer events. +The driver will generate events over the input layer for hot keys and +radio switches, and over the ACPI netlink layer for other events. The +input layer support accepts the standard IOCTLs to remap the keycodes +assigned to each hot key. The hot key bit mask allows some control over which hot keys generate events. If a key is "masked" (bit set to 0 in the mask), the firmware @@ -256,6 +258,20 @@ sysfs notes: disabled" postition, and 1 if the switch is in the "radios enabled" position. + hotkey_report_mode: + Returns the state of the procfs ACPI event report mode + filter for hot keys. If it is set to 1 (the default), + all hot key presses are reported both through the input + layer and also as ACPI events through procfs (but not + through netlink). If it is set to 2, hot key presses + are reported only through the input layer. + + This attribute is read-only in kernels 2.6.23 or later, + and read-write on earlier kernels. + + May return -EPERM (write access locked out by module + parameter) or -EACCES (read-only). + input layer notes: A Hot key is mapped to a single input layer EV_KEY event, possibly @@ -393,21 +409,63 @@ unknown by the driver if the ThinkPad firmware triggered these events on hot key press or release, but the firmware will do it for either one, not both. -If a key is mapped to KEY_RESERVED, it generates no input events at all, -and it may generate a legacy thinkpad-acpi ACPI hotkey event. - +If a key is mapped to KEY_RESERVED, it generates no input events at all. If a key is mapped to KEY_UNKNOWN, it generates an input event that -includes an scan code, and it may also generate a legacy thinkpad-acpi -ACPI hotkey event. - -If a key is mapped to anything else, it will only generate legacy -thinkpad-acpi ACPI hotkey events if nobody has opened the input device. +includes an scan code. If a key is mapped to anything else, it will +generate input device EV_KEY events. Non hot-key ACPI HKEY event map: 0x5001 Lid closed 0x5002 Lid opened 0x7000 Radio Switch may have changed state +The above events are not propagated by the driver, except for legacy +compatibility purposes when hotkey_report_mode is set to 1. + +Compatibility notes: + +ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never +supported the input layer, and sent events over the procfs ACPI event +interface. + +To avoid sending duplicate events over the input layer and the ACPI +event interface, thinkpad-acpi 0.16 implements a module parameter +(hotkey_report_mode), and also a sysfs device attribute with the same +name. + +Make no mistake here: userspace is expected to switch to using the input +layer interface of thinkpad-acpi, together with the ACPI netlink event +interface in kernels 2.6.23 and later, or with the ACPI procfs event +interface in kernels 2.6.22 and earlier. + +If no hotkey_report_mode module parameter is specified (or it is set to +zero), the driver defaults to mode 1 (see below), and on kernels 2.6.22 +and earlier, also allows one to change the hotkey_report_mode through +sysfs. In kernels 2.6.23 and later, where the netlink ACPI event +interface is available, hotkey_report_mode cannot be changed through +sysfs (it is read-only). + +If the hotkey_report_mode module parameter is set to 1 or 2, it cannot +be changed later through sysfs (any writes will return -EPERM to signal +that hotkey_report_mode was locked. On 2.6.23 and later, where +hotkey_report_mode cannot be changed at all, writes will return -EACES). + +hotkey_report_mode set to 1 makes the driver export through the procfs +ACPI event interface all hot key presses (which are *also* sent to the +input layer). This is a legacy compatibility behaviour, and it is also +the default mode of operation for the driver. + +hotkey_report_mode set to 2 makes the driver filter out the hot key +presses from the procfs ACPI event interface, so these events will only +be sent through the input layer. Userspace that has been updated to use +the thinkpad-acpi input layer interface should set hotkey_report_mode to +2. + +Hot key press events are never sent to the ACPI netlink event interface. +Really up-to-date userspace under kernel 2.6.23 and later is to use the +netlink interface and the input layer interface, and don't bother at all +with hotkey_report_mode. + Bluetooth --------- diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c index a2b9304596ce..5c95863f8fa9 100644 --- a/drivers/acpi/event.c +++ b/drivers/acpi/event.c @@ -240,7 +240,7 @@ int acpi_bus_generate_netlink_event(const char *device_class, return 0; } -EXPORT_SYMBOL(acpi_generate_netlink_event); +EXPORT_SYMBOL(acpi_bus_generate_netlink_event); static int acpi_event_genetlink_init(void) { diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 66b62b0d3609..3839efd5eaea 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -23,7 +23,7 @@ */ ACPI_MODULE_NAME("sleep") -#ifdef CONFIG_ACPI_PROCFS_SLEEP +#ifdef CONFIG_ACPI_PROCFS static int acpi_system_sleep_seq_show(struct seq_file *seq, void *offset) { int i; @@ -76,7 +76,7 @@ acpi_system_write_sleep(struct file *file, Done: return error ? error : count; } -#endif /* CONFIG_ACPI_PROCFS_SLEEP */ +#endif /* CONFIG_ACPI_PROCFS */ #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || !defined(CONFIG_X86) /* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */ @@ -471,7 +471,7 @@ static const struct file_operations acpi_system_wakeup_device_fops = { .release = single_release, }; -#ifdef CONFIG_ACPI_PROCFS_SLEEP +#ifdef CONFIG_ACPI_PROCFS static const struct file_operations acpi_system_sleep_fops = { .open = acpi_system_sleep_open_fs, .read = seq_read, @@ -479,7 +479,7 @@ static const struct file_operations acpi_system_sleep_fops = { .llseek = seq_lseek, .release = single_release, }; -#endif /* CONFIG_ACPI_PROCFS_SLEEP */ +#endif /* CONFIG_ACPI_PROCFS */ #ifdef HAVE_ACPI_LEGACY_ALARM static const struct file_operations acpi_system_alarm_fops = { @@ -506,7 +506,7 @@ static int __init acpi_sleep_proc_init(void) if (acpi_disabled) return 0; -#ifdef CONFIG_ACPI_PROCFS_SLEEP +#ifdef CONFIG_ACPI_PROCFS /* 'sleep' [R/W] */ entry = create_proc_entry("sleep", S_IFREG | S_IRUGO | S_IWUSR, diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index a26655881e6a..73e248fb2ff1 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -202,25 +202,5 @@ config THINKPAD_ACPI_BAY If you are not sure, say Y here. -config THINKPAD_ACPI_INPUT_ENABLED - bool "Enable input layer support by default" - depends on THINKPAD_ACPI - default n - ---help--- - This option enables thinkpad-acpi hot key handling over the input - layer at driver load time. When it is unset, the driver does not - enable hot key handling by default, and also starts up with a mostly - empty keymap. - - This option should be enabled if you have a new enough HAL or other - userspace support that properly handles the thinkpad-acpi event - device. It auto-tunes the hot key support to those reported by the - firmware and enables it automatically. - - If unsure, say N here to retain the old behaviour of ibm-acpi, and - thinkpad-acpi up to kernel 2.6.21: userspace will have to enable and - set up the thinkpad-acpi hot key handling using the sysfs interace - after loading the driver. - endif # MISC_DEVICES diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c index 932a415197b3..349be934db7c 100644 --- a/drivers/misc/msi-laptop.c +++ b/drivers/misc/msi-laptop.c @@ -353,7 +353,7 @@ static int __init msi_init(void) if (IS_ERR(msibl_device)) return PTR_ERR(msibl_device); - msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1, + msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; ret = platform_driver_register(&msipf_driver); if (ret) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index bb8956d0c104..0222bbaf7b76 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -21,7 +21,7 @@ * 02110-1301, USA. */ -#define IBM_VERSION "0.15" +#define IBM_VERSION "0.16" #define TPACPI_SYSFS_VERSION 0x010000 /* @@ -906,9 +906,26 @@ static ssize_t hotkey_radio_sw_show(struct device *dev, static struct device_attribute dev_attr_hotkey_radio_sw = __ATTR(hotkey_radio_sw, S_IRUGO, hotkey_radio_sw_show, NULL); +/* sysfs hotkey report_mode -------------------------------------------- */ +static ssize_t hotkey_report_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", + (hotkey_report_mode != 0) ? hotkey_report_mode : 1); +} + +static struct device_attribute dev_attr_hotkey_report_mode = + __ATTR(hotkey_report_mode, S_IRUGO, hotkey_report_mode_show, NULL); + /* --------------------------------------------------------------------- */ -static struct attribute *hotkey_mask_attributes[] = { +static struct attribute *hotkey_attributes[] __initdata = { + &dev_attr_hotkey_enable.attr, + &dev_attr_hotkey_report_mode.attr, +}; + +static struct attribute *hotkey_mask_attributes[] __initdata = { &dev_attr_hotkey_mask.attr, &dev_attr_hotkey_bios_enabled.attr, &dev_attr_hotkey_bios_mask.attr, @@ -987,11 +1004,12 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) str_supported(tp_features.hotkey)); if (tp_features.hotkey) { - hotkey_dev_attributes = create_attr_set(7, NULL); + hotkey_dev_attributes = create_attr_set(8, NULL); if (!hotkey_dev_attributes) return -ENOMEM; - res = add_to_attr_set(hotkey_dev_attributes, - &dev_attr_hotkey_enable.attr); + res = add_many_to_attr_set(hotkey_dev_attributes, + hotkey_attributes, + ARRAY_SIZE(hotkey_attributes)); if (res) return res; @@ -1055,11 +1073,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) TPACPI_HOTKEY_MAP_SIZE); } -#ifndef CONFIG_THINKPAD_ACPI_INPUT_ENABLED - for (i = 0; i < 12; i++) - hotkey_keycode_map[i] = KEY_UNKNOWN; -#endif /* ! CONFIG_THINKPAD_ACPI_INPUT_ENABLED */ - set_bit(EV_KEY, tpacpi_inputdev->evbit); set_bit(EV_MSC, tpacpi_inputdev->evbit); set_bit(MSC_SCAN, tpacpi_inputdev->mscbit); @@ -1081,14 +1094,17 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) set_bit(SW_RADIO, tpacpi_inputdev->swbit); } -#ifdef CONFIG_THINKPAD_ACPI_INPUT_ENABLED dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); res = hotkey_set(1, (hotkey_all_mask & ~hotkey_reserved_mask) | hotkey_orig_mask); if (res) return res; -#endif /* CONFIG_THINKPAD_ACPI_INPUT_ENABLED */ + + dbg_printk(TPACPI_DBG_INIT, + "legacy hot key reporting over procfs %s\n", + (hotkey_report_mode < 2) ? + "enabled" : "disabled"); } return (tp_features.hotkey)? 0 : 1; @@ -1142,58 +1158,65 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) { u32 hkey; unsigned int keycode, scancode; - int sendacpi = 1; + int send_acpi_ev = 0; if (event == 0x80 && acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) { - if (tpacpi_inputdev->users > 0) { - switch (hkey >> 12) { - case 1: - /* 0x1000-0x1FFF: key presses */ - scancode = hkey & 0xfff; - if (scancode > 0 && scancode < 0x21) { - scancode--; - keycode = hotkey_keycode_map[scancode]; - tpacpi_input_send_key(scancode, keycode); - sendacpi = (keycode == KEY_RESERVED - || keycode == KEY_UNKNOWN); - } else { - printk(IBM_ERR - "hotkey 0x%04x out of range for keyboard map\n", - hkey); - } - break; - case 5: - /* 0x5000-0x5FFF: LID */ - /* we don't handle it through this path, just - * eat up known LID events */ - if (hkey != 0x5001 && hkey != 0x5002) { - printk(IBM_ERR - "unknown LID-related hotkey event: 0x%04x\n", - hkey); - } - break; - case 7: - /* 0x7000-0x7FFF: misc */ - if (tp_features.hotkey_wlsw && hkey == 0x7000) { - tpacpi_input_send_radiosw(); - sendacpi = 0; - break; - } - /* fallthrough to default */ - default: - /* case 2: dock-related */ - /* 0x2305 - T43 waking up due to bay lever eject while aslept */ - /* case 3: ultra-bay related. maybe bay in dock? */ - /* 0x3003 - T43 after wake up by bay lever eject (0x2305) */ - printk(IBM_NOTICE "unhandled hotkey event 0x%04x\n", hkey); + switch (hkey >> 12) { + case 1: + /* 0x1000-0x1FFF: key presses */ + scancode = hkey & 0xfff; + if (scancode > 0 && scancode < 0x21) { + scancode--; + keycode = hotkey_keycode_map[scancode]; + tpacpi_input_send_key(scancode, keycode); + } else { + printk(IBM_ERR + "hotkey 0x%04x out of range for keyboard map\n", + hkey); + send_acpi_ev = 1; } + break; + case 5: + /* 0x5000-0x5FFF: LID */ + /* we don't handle it through this path, just + * eat up known LID events */ + if (hkey != 0x5001 && hkey != 0x5002) { + printk(IBM_ERR + "unknown LID-related hotkey event: 0x%04x\n", + hkey); + send_acpi_ev = 1; + } + break; + case 7: + /* 0x7000-0x7FFF: misc */ + if (tp_features.hotkey_wlsw && hkey == 0x7000) { + tpacpi_input_send_radiosw(); + break; + } + /* fallthrough to default */ + default: + /* case 2: dock-related */ + /* 0x2305 - T43 waking up due to bay lever eject while aslept */ + /* case 3: ultra-bay related. maybe bay in dock? */ + /* 0x3003 - T43 after wake up by bay lever eject (0x2305) */ + printk(IBM_NOTICE "unhandled HKEY event 0x%04x\n", hkey); + send_acpi_ev = 1; } - - if (sendacpi) - acpi_bus_generate_proc_event(ibm->acpi->device, event, hkey); } else { printk(IBM_ERR "unknown hotkey notification event %d\n", event); - acpi_bus_generate_proc_event(ibm->acpi->device, event, 0); + hkey = 0; + send_acpi_ev = 1; + } + + /* Legacy events */ + if (send_acpi_ev || hotkey_report_mode < 2) + acpi_bus_generate_proc_event(ibm->acpi->device, event, hkey); + + /* netlink events */ + if (send_acpi_ev) { + acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class, + ibm->acpi->device->dev.bus_id, + event, hkey); } } @@ -4623,6 +4646,9 @@ module_param_named(fan_control, fan_control_allowed, bool, 0); static int brightness_mode; module_param_named(brightness_mode, brightness_mode, int, 0); +static unsigned int hotkey_report_mode; +module_param(hotkey_report_mode, uint, 0); + #define IBM_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0) @@ -4648,6 +4674,10 @@ static int __init thinkpad_acpi_module_init(void) { int ret, i; + /* Parameter checking */ + if (hotkey_report_mode > 2) + return -EINVAL; + /* Driver-level probe */ get_thinkpad_model_data(&thinkpad_id); diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h index eee8809a50d9..082a1cbc16c0 100644 --- a/drivers/misc/thinkpad_acpi.h +++ b/drivers/misc/thinkpad_acpi.h @@ -181,6 +181,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv); static int experimental; static u32 dbg_level; static int force_load; +static unsigned int hotkey_report_mode; static int thinkpad_acpi_module_init(void); static void thinkpad_acpi_module_exit(void);