From 420e7fabd9c6d907280ed6b3e40eef425c5d8d8d Mon Sep 17 00:00:00 2001
From: Henning Rogge <hrogge@googlemail.com>
Date: Thu, 11 Dec 2008 22:04:19 +0100
Subject: [PATCH 01/45] nl80211: Add signal strength and bandwith to
 nl80211station info

This patch adds signal strength and transmission bitrate
to the station_info of nl80211.

Signed-off-by: Henning Rogge <rogge@fgan.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h | 31 ++++++++++++++++++++++
 include/net/cfg80211.h  | 40 ++++++++++++++++++++++++++++
 net/mac80211/cfg.c      | 25 +++++++++++++++++-
 net/wireless/nl80211.c  | 58 ++++++++++++++++++++++++++++++++++++++++-
 4 files changed, 152 insertions(+), 2 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 04d4516f9c71..7501acfcfdc4 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -424,6 +424,32 @@ enum nl80211_sta_flags {
 	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
 };
 
+/**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
+ * @__NL80211_RATE_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_rate_info {
+	__NL80211_RATE_INFO_INVALID,
+	NL80211_RATE_INFO_BITRATE,
+	NL80211_RATE_INFO_MCS,
+	NL80211_RATE_INFO_40_MHZ_WIDTH,
+	NL80211_RATE_INFO_SHORT_GI,
+
+	/* keep last */
+	__NL80211_RATE_INFO_AFTER_LAST,
+	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
+};
+
 /**
  * enum nl80211_sta_info - station information
  *
@@ -436,6 +462,9 @@ enum nl80211_sta_flags {
  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ * 	containing info as possible, see &enum nl80211_sta_info_txrate.
  */
 enum nl80211_sta_info {
 	__NL80211_STA_INFO_INVALID,
@@ -445,6 +474,8 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_LLID,
 	NL80211_STA_INFO_PLID,
 	NL80211_STA_INFO_PLINK_STATE,
+	NL80211_STA_INFO_SIGNAL,
+	NL80211_STA_INFO_TX_BITRATE,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a0c0bf19496c..65e03ac93109 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -169,6 +169,9 @@ struct station_parameters {
  * @STATION_INFO_LLID: @llid filled
  * @STATION_INFO_PLID: @plid filled
  * @STATION_INFO_PLINK_STATE: @plink_state filled
+ * @STATION_INFO_SIGNAL: @signal filled
+ * @STATION_INFO_TX_BITRATE: @tx_bitrate fields are filled
+ *  (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
  */
 enum station_info_flags {
 	STATION_INFO_INACTIVE_TIME	= 1<<0,
@@ -177,6 +180,39 @@ enum station_info_flags {
 	STATION_INFO_LLID		= 1<<3,
 	STATION_INFO_PLID		= 1<<4,
 	STATION_INFO_PLINK_STATE	= 1<<5,
+	STATION_INFO_SIGNAL		= 1<<6,
+	STATION_INFO_TX_BITRATE		= 1<<7,
+};
+
+/**
+ * enum station_info_rate_flags - bitrate info flags
+ *
+ * Used by the driver to indicate the specific rate transmission
+ * type for 802.11n transmissions.
+ *
+ * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
+ * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
+ * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
+ */
+enum rate_info_flags {
+	RATE_INFO_FLAGS_MCS		= 1<<0,
+	RATE_INFO_FLAGS_40_MHZ_WIDTH	= 1<<1,
+	RATE_INFO_FLAGS_SHORT_GI	= 1<<2,
+};
+
+/**
+ * struct rate_info - bitrate information
+ *
+ * Information about a receiving or transmitting bitrate
+ *
+ * @flags: bitflag of flags from &enum rate_info_flags
+ * @mcs: mcs index if struct describes a 802.11n bitrate
+ * @legacy: bitrate in 100kbit/s for 802.11abg
+ */
+struct rate_info {
+	u8 flags;
+	u8 mcs;
+	u16 legacy;
 };
 
 /**
@@ -191,6 +227,8 @@ enum station_info_flags {
  * @llid: mesh local link id
  * @plid: mesh peer link id
  * @plink_state: mesh peer link state
+ * @signal: signal strength of last received packet in dBm
+ * @txrate: current unicast bitrate to this station
  */
 struct station_info {
 	u32 filled;
@@ -200,6 +238,8 @@ struct station_info {
 	u16 llid;
 	u16 plid;
 	u8 plink_state;
+	s8 signal;
+	struct rate_info txrate;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 7912eb14eca0..23b5eeaf7bc5 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -310,12 +310,35 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 
 	sinfo->filled = STATION_INFO_INACTIVE_TIME |
 			STATION_INFO_RX_BYTES |
-			STATION_INFO_TX_BYTES;
+			STATION_INFO_TX_BYTES |
+			STATION_INFO_TX_BITRATE;
 
 	sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
 	sinfo->rx_bytes = sta->rx_bytes;
 	sinfo->tx_bytes = sta->tx_bytes;
 
+	if (sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) {
+		sinfo->filled |= STATION_INFO_SIGNAL;
+		sinfo->signal = (s8)sta->last_signal;
+	}
+
+	sinfo->txrate.flags = 0;
+	if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)
+		sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
+	if (sta->last_tx_rate.flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+		sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
+	if (sta->last_tx_rate.flags & IEEE80211_TX_RC_SHORT_GI)
+		sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+	if (!(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) {
+		struct ieee80211_supported_band *sband;
+		sband = sta->local->hw.wiphy->bands[
+				sta->local->hw.conf.channel->band];
+		sinfo->txrate.legacy =
+			sband->bitrates[sta->last_tx_rate.idx].bitrate;
+	} else
+		sinfo->txrate.mcs = sta->last_tx_rate.idx;
+
 	if (ieee80211_vif_is_mesh(&sdata->vif)) {
 #ifdef CONFIG_MAC80211_MESH
 		sinfo->filled |= STATION_INFO_LLID |
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 4335f76be71f..93c9b983ce08 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1091,12 +1091,46 @@ static int parse_station_flags(struct nlattr *nla, u32 *staflags)
 	return 0;
 }
 
+static u16 nl80211_calculate_bitrate(struct rate_info *rate)
+{
+	int modulation, streams, bitrate;
+
+	if (!(rate->flags & RATE_INFO_FLAGS_MCS))
+		return rate->legacy;
+
+	/* the formula below does only work for MCS values smaller than 32 */
+	if (rate->mcs >= 32)
+		return 0;
+
+	modulation = rate->mcs & 7;
+	streams = (rate->mcs >> 3) + 1;
+
+	bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ?
+			13500000 : 6500000;
+
+	if (modulation < 4)
+		bitrate *= (modulation + 1);
+	else if (modulation == 4)
+		bitrate *= (modulation + 2);
+	else
+		bitrate *= (modulation + 3);
+
+	bitrate *= streams;
+
+	if (rate->flags & RATE_INFO_FLAGS_SHORT_GI)
+		bitrate = (bitrate / 9) * 10;
+
+	/* do NOT round down here */
+	return (bitrate + 50000) / 100000;
+}
+
 static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 				int flags, struct net_device *dev,
 				u8 *mac_addr, struct station_info *sinfo)
 {
 	void *hdr;
-	struct nlattr *sinfoattr;
+	struct nlattr *sinfoattr, *txrate;
+	u16 bitrate;
 
 	hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_STATION);
 	if (!hdr)
@@ -1126,7 +1160,29 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 	if (sinfo->filled & STATION_INFO_PLINK_STATE)
 		NLA_PUT_U8(msg, NL80211_STA_INFO_PLINK_STATE,
 			    sinfo->plink_state);
+	if (sinfo->filled & STATION_INFO_SIGNAL)
+		NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL,
+			   sinfo->signal);
+	if (sinfo->filled & STATION_INFO_TX_BITRATE) {
+		txrate = nla_nest_start(msg, NL80211_STA_INFO_TX_BITRATE);
+		if (!txrate)
+			goto nla_put_failure;
 
+		/* nl80211_calculate_bitrate will return 0 for mcs >= 32 */
+		bitrate = nl80211_calculate_bitrate(&sinfo->txrate);
+		if (bitrate > 0)
+			NLA_PUT_U16(msg, NL80211_RATE_INFO_BITRATE, bitrate);
+
+		if (sinfo->txrate.flags & RATE_INFO_FLAGS_MCS)
+			NLA_PUT_U8(msg, NL80211_RATE_INFO_MCS,
+				    sinfo->txrate.mcs);
+		if (sinfo->txrate.flags & RATE_INFO_FLAGS_40_MHZ_WIDTH)
+			NLA_PUT_FLAG(msg, NL80211_RATE_INFO_40_MHZ_WIDTH);
+		if (sinfo->txrate.flags & RATE_INFO_FLAGS_SHORT_GI)
+			NLA_PUT_FLAG(msg, NL80211_RATE_INFO_SHORT_GI);
+
+		nla_nest_end(msg, txrate);
+	}
 	nla_nest_end(msg, sinfoattr);
 
 	return genlmsg_end(msg, hdr);

From 094d05dc32fc2930e381189a942016e5561775d9 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Fri, 12 Dec 2008 11:57:43 +0530
Subject: [PATCH 02/45] mac80211: Fix HT channel selection

HT management is done differently for AP and STA modes, unify
to just the ->config() callback since HT is fundamentally a
PHY property and cannot be per-BSS.

Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote
the channel type ( NO_HT, HT20, HT40+, HT40- ).

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/main.c      | 123 ++++++-------------------
 drivers/net/wireless/iwlwifi/iwl-agn.c |  18 +++-
 drivers/net/wireless/mac80211_hwsim.c  |   6 +-
 include/linux/nl80211.h                |  22 ++---
 include/net/cfg80211.h                 |   2 +-
 include/net/mac80211.h                 |   9 +-
 net/mac80211/cfg.c                     |   4 +-
 net/mac80211/ht.c                      |  35 ++++---
 net/mac80211/ieee80211_i.h             |   2 +-
 net/mac80211/main.c                    |  27 ++----
 net/mac80211/mlme.c                    |   1 +
 net/mac80211/util.c                    |   2 +-
 net/wireless/nl80211.c                 |  27 +++---
 13 files changed, 109 insertions(+), 169 deletions(-)

diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 02e1771bb274..e22fea18bad6 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -623,37 +623,40 @@ static int ath_get_channel(struct ath_softc *sc,
 	return -1;
 }
 
-/* ext_chan_offset: (-1, 0, 1) (below, none, above) */
-
 static u32 ath_get_extchanmode(struct ath_softc *sc,
 			       struct ieee80211_channel *chan,
-			       int ext_chan_offset,
-			       enum ath9k_ht_macmode tx_chan_width)
+			       enum nl80211_channel_type channel_type)
 {
 	u32 chanmode = 0;
 
 	switch (chan->band) {
 	case IEEE80211_BAND_2GHZ:
-		if ((ext_chan_offset == 0) &&
-		    (tx_chan_width == ATH9K_HT_MACMODE_20))
+		switch(channel_type) {
+		case NL80211_CHAN_NO_HT:
+		case NL80211_CHAN_HT20:
 			chanmode = CHANNEL_G_HT20;
-		if ((ext_chan_offset == 1) &&
-		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			break;
+		case NL80211_CHAN_HT40PLUS:
 			chanmode = CHANNEL_G_HT40PLUS;
-		if ((ext_chan_offset == -1) &&
-		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			break;
+		case NL80211_CHAN_HT40MINUS:
 			chanmode = CHANNEL_G_HT40MINUS;
+			break;
+		}
 		break;
 	case IEEE80211_BAND_5GHZ:
-		if ((ext_chan_offset == 0) &&
-		    (tx_chan_width == ATH9K_HT_MACMODE_20))
+		switch(channel_type) {
+		case NL80211_CHAN_NO_HT:
+		case NL80211_CHAN_HT20:
 			chanmode = CHANNEL_A_HT20;
-		if ((ext_chan_offset == 1) &&
-		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			break;
+		case NL80211_CHAN_HT40PLUS:
 			chanmode = CHANNEL_A_HT40PLUS;
-		if ((ext_chan_offset == -1) &&
-		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			break;
+		case NL80211_CHAN_HT40MINUS:
 			chanmode = CHANNEL_A_HT40MINUS;
+			break;
+		}
 		break;
 	default:
 		break;
@@ -829,45 +832,15 @@ static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info)
 	ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
 }
 
-static void ath9k_ht_conf(struct ath_softc *sc,
-			  struct ieee80211_bss_conf *bss_conf)
-{
-	if (sc->hw->conf.ht.enabled) {
-		if (bss_conf->ht.width_40_ok)
-			sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
-		else
-			sc->tx_chan_width = ATH9K_HT_MACMODE_20;
-
-		ath9k_hw_set11nmac2040(sc->sc_ah, sc->tx_chan_width);
-
-		DPRINTF(sc, ATH_DBG_CONFIG,
-			"BSS Changed HT, chanwidth: %d\n", sc->tx_chan_width);
-	}
-}
-
-static inline int ath_sec_offset(u8 ext_offset)
-{
-	if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE)
-		return 0;
-	else if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
-		return 1;
-	else if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
-		return -1;
-
-	return 0;
-}
-
 static void ath9k_bss_assoc_info(struct ath_softc *sc,
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_bss_conf *bss_conf)
 {
-	struct ieee80211_hw *hw = sc->hw;
-	struct ieee80211_channel *curchan = hw->conf.channel;
 	struct ath_vap *avp = (void *)vif->drv_priv;
-	int pos;
 
 	if (bss_conf->assoc) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d\n", bss_conf->aid);
+		DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
+			bss_conf->aid, sc->sc_curbssid);
 
 		/* New association, store aid */
 		if (avp->av_opmode == NL80211_IFTYPE_STATION) {
@@ -886,40 +859,6 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 		sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
 		sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
 
-		/* Update chainmask */
-		ath_update_chainmask(sc, hw->conf.ht.enabled);
-
-		DPRINTF(sc, ATH_DBG_CONFIG,
-			"bssid %pM aid 0x%x\n",
-			sc->sc_curbssid, sc->sc_curaid);
-
-		pos = ath_get_channel(sc, curchan);
-		if (pos == -1) {
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"Invalid channel: %d\n", curchan->center_freq);
-			return;
-		}
-
-		if (hw->conf.ht.enabled) {
-			int offset =
-				ath_sec_offset(bss_conf->ht.secondary_channel_offset);
-			sc->tx_chan_width = (bss_conf->ht.width_40_ok) ?
-				ATH9K_HT_MACMODE_2040 : ATH9K_HT_MACMODE_20;
-
-			sc->sc_ah->ah_channels[pos].chanmode =
-				ath_get_extchanmode(sc, curchan,
-						    offset, sc->tx_chan_width);
-		} else {
-			sc->sc_ah->ah_channels[pos].chanmode =
-				(curchan->band == IEEE80211_BAND_2GHZ) ?
-				CHANNEL_G : CHANNEL_A;
-		}
-
-		/* set h/w channel */
-		if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0)
-			DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel: %d\n",
-				curchan->center_freq);
-
 		/* Start ANI */
 		mod_timer(&sc->sc_ani.timer,
 			jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
@@ -2146,7 +2085,8 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 	struct ath_softc *sc = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
 
-	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+	if (changed & (IEEE80211_CONF_CHANGE_CHANNEL |
+		       IEEE80211_CONF_CHANGE_HT)) {
 		struct ieee80211_channel *curchan = hw->conf.channel;
 		int pos;
 
@@ -2165,25 +2105,23 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 			(curchan->band == IEEE80211_BAND_2GHZ) ?
 			CHANNEL_G : CHANNEL_A;
 
-		if ((sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) &&
-		    (conf->ht.enabled)) {
-			sc->tx_chan_width = (!!conf->ht.sec_chan_offset) ?
-				ATH9K_HT_MACMODE_2040 : ATH9K_HT_MACMODE_20;
+		if (conf->ht.enabled) {
+			if (conf->ht.channel_type == NL80211_CHAN_HT40PLUS ||
+			    conf->ht.channel_type == NL80211_CHAN_HT40MINUS)
+				sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
 
 			sc->sc_ah->ah_channels[pos].chanmode =
 				ath_get_extchanmode(sc, curchan,
-						    conf->ht.sec_chan_offset,
-						    sc->tx_chan_width);
+						    conf->ht.channel_type);
 		}
 
 		if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) {
 			DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
 			return -EINVAL;
 		}
-	}
 
-	if (changed & IEEE80211_CONF_CHANGE_HT)
 		ath_update_chainmask(sc, conf->ht.enabled);
+	}
 
 	if (changed & IEEE80211_CONF_CHANGE_POWER)
 		sc->sc_config.txpowlimit = 2 * conf->power_level;
@@ -2417,9 +2355,6 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 			sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
 	}
 
-	if (changed & BSS_CHANGED_HT)
-		ath9k_ht_conf(sc, bss_conf);
-
 	if (changed & BSS_CHANGED_ASSOC) {
 		DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
 			bss_conf->assoc);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 2f5e86e12916..bbc1c8052ffa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -515,19 +515,27 @@ static void iwl_ht_conf(struct iwl_priv *priv,
 	iwl_conf->supported_chan_width =
 		!!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
 
-	iwl_conf->extension_chan_offset = bss_conf->ht.secondary_channel_offset;
+	/*
+	 * XXX: The HT configuration needs to be moved into iwl_mac_config()
+	 *	to be done there correctly.
+	 */
+
+	iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+	if (priv->hw->conf.ht.channel_type == NL80211_CHAN_HT40MINUS)
+		iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+	else if(priv->hw->conf.ht.channel_type == NL80211_CHAN_HT40PLUS)
+		iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+
 	/* If no above or below channel supplied disable FAT channel */
 	if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE &&
-	    iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW) {
-		iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+	    iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW)
 		iwl_conf->supported_chan_width = 0;
-	}
 
 	iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
 
 	memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
 
-	iwl_conf->tx_chan_width = bss_conf->ht.width_40_ok;
+	iwl_conf->tx_chan_width = iwl_conf->supported_chan_width != 0;
 	iwl_conf->ht_protection =
 		bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
 	iwl_conf->non_GF_STA_present =
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index fd5a537ac51d..f83d69e813d3 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -495,11 +495,9 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changed & BSS_CHANGED_HT) {
-		printk(KERN_DEBUG "  %s: HT: sec_ch_offs=%d width_40_ok=%d "
-		       "op_mode=%d\n",
+		printk(KERN_DEBUG "  %s: HT: op_mode=0x%x\n",
 		       wiphy_name(hw->wiphy),
-		       info->ht.secondary_channel_offset,
-		       info->ht.width_40_ok, info->ht.operation_mode);
+		       info->ht.operation_mode);
 	}
 
 	if (changed & BSS_CHANGED_BASIC_RATES) {
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 7501acfcfdc4..e86ed59f9ad5 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -201,13 +201,13 @@ enum nl80211_commands {
  * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
  * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
  * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
- * @NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET: included with NL80211_ATTR_WIPHY_FREQ
+ * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
  *	if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
- *	NL80211_SEC_CHAN_NO_HT = HT not allowed (i.e., same as not including
+ *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
  *		this attribute)
- *	NL80211_SEC_CHAN_DISABLED = HT20 only
- *	NL80211_SEC_CHAN_BELOW = secondary channel is below the primary channel
- *	NL80211_SEC_CHAN_ABOVE = secondary channel is above the primary channel
+ *	NL80211_CHAN_HT20 = HT20 only
+ *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
+ *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
  *
  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
  * @NL80211_ATTR_IFNAME: network interface name
@@ -344,7 +344,7 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_WIPHY_TXQ_PARAMS,
 	NL80211_ATTR_WIPHY_FREQ,
-	NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET,
+	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
 
 	/* add attributes here, update the policy in nl80211.c */
 
@@ -805,10 +805,10 @@ enum nl80211_txq_q {
 	NL80211_TXQ_Q_BK
 };
 
-enum nl80211_sec_chan_offset {
-	NL80211_SEC_CHAN_NO_HT /* No HT */,
-	NL80211_SEC_CHAN_DISABLED /* HT20 only */,
-	NL80211_SEC_CHAN_BELOW /* HT40- */,
-	NL80211_SEC_CHAN_ABOVE /* HT40+ */
+enum nl80211_channel_type {
+	NL80211_CHAN_NO_HT,
+	NL80211_CHAN_HT20,
+	NL80211_CHAN_HT40MINUS,
+	NL80211_CHAN_HT40PLUS
 };
 #endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 65e03ac93109..23c0ab74ded6 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -563,7 +563,7 @@ struct cfg80211_ops {
 
 	int	(*set_channel)(struct wiphy *wiphy,
 			       struct ieee80211_channel *chan,
-			       enum nl80211_sec_chan_offset);
+			       enum nl80211_channel_type channel_type);
 };
 
 /* temporary wext handlers */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 046ce692a906..22ae72c58d76 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -165,14 +165,9 @@ enum ieee80211_bss_change {
 
 /**
  * struct ieee80211_bss_ht_conf - BSS's changing HT configuration
- * @secondary_channel_offset: secondary channel offset, uses
- *	%IEEE80211_HT_PARAM_CHA_SEC_ values
- * @width_40_ok: indicates that 40 MHz bandwidth may be used for TX
  * @operation_mode: HT operation mode (like in &struct ieee80211_ht_info)
  */
 struct ieee80211_bss_ht_conf {
-	u8 secondary_channel_offset;
-	bool width_40_ok;
 	u16 operation_mode;
 };
 
@@ -508,9 +503,7 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
 
 struct ieee80211_ht_conf {
 	bool enabled;
-	int sec_chan_offset; /* 0 = HT40 disabled; -1 = HT40 enabled, secondary
-			      * channel below primary; 1 = HT40 enabled,
-			      * secondary channel above primary */
+	enum nl80211_channel_type channel_type;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 23b5eeaf7bc5..3ea0884c9432 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1122,12 +1122,12 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy,
 
 static int ieee80211_set_channel(struct wiphy *wiphy,
 				 struct ieee80211_channel *chan,
-				 enum nl80211_sec_chan_offset sec_chan_offset)
+				 enum nl80211_channel_type channel_type)
 {
 	struct ieee80211_local *local = wiphy_priv(wiphy);
 
 	local->oper_channel = chan;
-	local->oper_sec_chan_offset = sec_chan_offset;
+	local->oper_channel_type = channel_type;
 
 	return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
 }
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index a1eed7032c9b..5f510a13b9f0 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -98,6 +98,7 @@ u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_bss_ht_conf ht;
 	u32 changed = 0;
 	bool enable_ht = true, ht_changed;
+	enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
 
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 
@@ -112,24 +113,36 @@ u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
 	    ieee80211_channel_to_frequency(hti->control_chan))
 		enable_ht = false;
 
-	/*
-	 * XXX: This is totally incorrect when there are multiple virtual
-	 *	interfaces, needs to be fixed later.
-	 */
-	ht_changed = local->hw.conf.ht.enabled != enable_ht;
+	if (enable_ht) {
+		channel_type = NL80211_CHAN_HT20;
+
+		if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
+		    (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
+		    (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
+			switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				channel_type = NL80211_CHAN_HT40PLUS;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				channel_type = NL80211_CHAN_HT40MINUS;
+				break;
+			}
+		}
+	}
+
+	ht_changed = local->hw.conf.ht.enabled != enable_ht ||
+		     channel_type != local->hw.conf.ht.channel_type;
+
+	local->oper_channel_type = channel_type;
 	local->hw.conf.ht.enabled = enable_ht;
+
 	if (ht_changed)
 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT);
 
 	/* disable HT */
 	if (!enable_ht)
 		return 0;
-	ht.secondary_channel_offset =
-		hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
-	ht.width_40_ok =
-		!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
-		(sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
-		(hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY);
+
 	ht.operation_mode = le16_to_cpu(hti->operation_mode);
 
 	/* if bss configuration changed store the new one */
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6f59e11d7b33..a7dabaecfc72 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -625,7 +625,7 @@ struct ieee80211_local {
 	struct delayed_work scan_work;
 	struct ieee80211_sub_if_data *scan_sdata;
 	struct ieee80211_channel *oper_channel, *scan_channel;
-	enum nl80211_sec_chan_offset oper_sec_chan_offset;
+	enum nl80211_channel_type oper_channel_type;
 	u8 scan_ssid[IEEE80211_MAX_SSID_LEN];
 	size_t scan_ssid_len;
 	struct list_head bss_list;
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 6d8710327d14..a0371caf01ce 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -195,37 +195,30 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 	struct ieee80211_channel *chan;
 	int ret = 0;
 	int power;
-	enum nl80211_sec_chan_offset sec_chan_offset;
+	enum nl80211_channel_type channel_type;
 
 	might_sleep();
 
 	if (local->sw_scanning) {
 		chan = local->scan_channel;
-		sec_chan_offset = NL80211_SEC_CHAN_NO_HT;
+		channel_type = NL80211_CHAN_NO_HT;
 	} else {
 		chan = local->oper_channel;
-		sec_chan_offset = local->oper_sec_chan_offset;
+		channel_type = local->oper_channel_type;
 	}
 
 	if (chan != local->hw.conf.channel ||
-	    sec_chan_offset != local->hw.conf.ht.sec_chan_offset) {
+	    channel_type != local->hw.conf.ht.channel_type) {
 		local->hw.conf.channel = chan;
-		switch (sec_chan_offset) {
-		case NL80211_SEC_CHAN_NO_HT:
+		local->hw.conf.ht.channel_type = channel_type;
+		switch (channel_type) {
+		case NL80211_CHAN_NO_HT:
 			local->hw.conf.ht.enabled = false;
-			local->hw.conf.ht.sec_chan_offset = 0;
 			break;
-		case NL80211_SEC_CHAN_DISABLED:
+		case NL80211_CHAN_HT20:
+		case NL80211_CHAN_HT40MINUS:
+		case NL80211_CHAN_HT40PLUS:
 			local->hw.conf.ht.enabled = true;
-			local->hw.conf.ht.sec_chan_offset = 0;
-			break;
-		case NL80211_SEC_CHAN_BELOW:
-			local->hw.conf.ht.enabled = true;
-			local->hw.conf.ht.sec_chan_offset = -1;
-			break;
-		case NL80211_SEC_CHAN_ABOVE:
-			local->hw.conf.ht.enabled = true;
-			local->hw.conf.ht.sec_chan_offset = 1;
 			break;
 		}
 		changed |= IEEE80211_CONF_CHANGE_CHANNEL;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 290b0017ef2e..e4d1fca5c72d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -858,6 +858,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	rcu_read_unlock();
 
 	local->hw.conf.ht.enabled = false;
+	local->oper_channel_type = NL80211_CHAN_NO_HT;
 	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT);
 
 	ieee80211_bss_info_change_notify(sdata, changed);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 505d68f344ce..71a8391c54f6 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -641,7 +641,7 @@ int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
 		    chan->flags & IEEE80211_CHAN_NO_IBSS)
 			return ret;
 		local->oper_channel = chan;
-		local->oper_sec_chan_offset = NL80211_SEC_CHAN_NO_HT;
+		local->oper_channel_type = NL80211_CHAN_NO_HT;
 
 		if (local->sw_scanning || local->hw_scanning)
 			ret = 0;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 93c9b983ce08..1e728fff474e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -60,7 +60,7 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
 				      .len = BUS_ID_SIZE-1 },
 	[NL80211_ATTR_WIPHY_TXQ_PARAMS] = { .type = NLA_NESTED },
 	[NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 },
-	[NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET] = { .type = NLA_U32 },
+	[NL80211_ATTR_WIPHY_CHANNEL_TYPE] = { .type = NLA_U32 },
 
 	[NL80211_ATTR_IFTYPE] = { .type = NLA_U32 },
 	[NL80211_ATTR_IFINDEX] = { .type = NLA_U32 },
@@ -362,8 +362,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
-		enum nl80211_sec_chan_offset sec_chan_offset =
-			NL80211_SEC_CHAN_NO_HT;
+		enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
 		struct ieee80211_channel *chan;
 		struct ieee80211_sta_ht_cap *ht_cap;
 		u32 freq, sec_freq;
@@ -375,13 +374,13 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 
 		result = -EINVAL;
 
-		if (info->attrs[NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET]) {
-			sec_chan_offset = nla_get_u32(info->attrs[
-					NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET]);
-			if (sec_chan_offset != NL80211_SEC_CHAN_NO_HT &&
-			    sec_chan_offset != NL80211_SEC_CHAN_DISABLED &&
-			    sec_chan_offset != NL80211_SEC_CHAN_BELOW &&
-			    sec_chan_offset != NL80211_SEC_CHAN_ABOVE)
+		if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
+			channel_type = nla_get_u32(info->attrs[
+					   NL80211_ATTR_WIPHY_CHANNEL_TYPE]);
+			if (channel_type != NL80211_CHAN_NO_HT &&
+			    channel_type != NL80211_CHAN_HT20 &&
+			    channel_type != NL80211_CHAN_HT40PLUS &&
+			    channel_type != NL80211_CHAN_HT40MINUS)
 				goto bad_res;
 		}
 
@@ -392,9 +391,9 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
 			goto bad_res;
 
-		if (sec_chan_offset == NL80211_SEC_CHAN_BELOW)
+		if (channel_type == NL80211_CHAN_HT40MINUS)
 			sec_freq = freq - 20;
-		else if (sec_chan_offset == NL80211_SEC_CHAN_ABOVE)
+		else if (channel_type == NL80211_CHAN_HT40PLUS)
 			sec_freq = freq + 20;
 		else
 			sec_freq = 0;
@@ -402,7 +401,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
 
 		/* no HT capabilities */
-		if (sec_chan_offset != NL80211_SEC_CHAN_NO_HT &&
+		if (channel_type != NL80211_CHAN_NO_HT &&
 		    !ht_cap->ht_supported)
 			goto bad_res;
 
@@ -422,7 +421,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		}
 
 		result = rdev->ops->set_channel(&rdev->wiphy, chan,
-						sec_chan_offset);
+						channel_type);
 		if (result)
 			goto bad_res;
 	}

From 9d8eed12dbc04f8ed70090da14211c808b5a8d81 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Fri, 12 Dec 2008 11:59:07 +0530
Subject: [PATCH 03/45] ath9k: Do not use association state to update rate
 table

Now that HT information is made available to the driver through
config() callback, the channel type can be calculated whenever
setting the channel. Update the rate table accordingly with the new
channel type.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index e22fea18bad6..550afbe8e96a 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -61,8 +61,7 @@ static void bus_read_cachesize(struct ath_softc *sc, int *csz)
 
 static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode)
 {
-	if (!sc->sc_curaid)
-		sc->cur_rate_table = sc->hw_rate_table[mode];
+	sc->cur_rate_table = sc->hw_rate_table[mode];
 	/*
 	 * All protection frames are transmited at 2Mb/s for
 	 * 11g, otherwise at 1Mb/s.

From 0fb8ca45eb164c405eef8978f26829f9348b4d4d Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Fri, 12 Dec 2008 14:38:33 +0200
Subject: [PATCH 04/45] mac80211: Add HT rates into RX status reporting

This patch adds option for HT-enabled drivers to report HT rates
(HT20/HT40, short GI, MCS index) to mac80211. These rates are
currently not in the rate table, so the rate_idx is used to indicate
MCS index.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/net/mac80211.h | 11 +++++++--
 net/mac80211/mlme.c    |  7 +++++-
 net/mac80211/rx.c      | 56 ++++++++++++++++++++++++++++++++++--------
 3 files changed, 61 insertions(+), 13 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 22ae72c58d76..9428d3e2f113 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -436,6 +436,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	is valid. This is useful in monitor mode and necessary for beacon frames
  *	to enable IBSS merging.
  * @RX_FLAG_SHORTPRE: Short preamble was used for this frame
+ * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
+ * @RX_FLAG_40MHZ: HT40 (40 MHz) was used
+ * @RX_FLAG_SHORT_GI: Short guard interval was used
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR	= 1<<0,
@@ -446,7 +449,10 @@ enum mac80211_rx_flags {
 	RX_FLAG_FAILED_FCS_CRC	= 1<<5,
 	RX_FLAG_FAILED_PLCP_CRC = 1<<6,
 	RX_FLAG_TSFT		= 1<<7,
-	RX_FLAG_SHORTPRE	= 1<<8
+	RX_FLAG_SHORTPRE	= 1<<8,
+	RX_FLAG_HT		= 1<<9,
+	RX_FLAG_40MHZ		= 1<<10,
+	RX_FLAG_SHORT_GI	= 1<<11,
 };
 
 /**
@@ -466,7 +472,8 @@ enum mac80211_rx_flags {
  * @noise: noise when receiving this frame, in dBm.
  * @qual: overall signal quality indication, in percent (0-100).
  * @antenna: antenna used
- * @rate_idx: index of data rate into band's supported rates
+ * @rate_idx: index of data rate into band's supported rates or MCS index if
+ *	HT rates are use (RX_FLAG_HT)
  * @flag: %RX_FLAG_*
  */
 struct ieee80211_rx_status {
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e4d1fca5c72d..a444b38f4901 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1613,8 +1613,13 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 			 * e.g: at 1 MBit that means mactime is 192 usec earlier
 			 * (=24 bytes * 8 usecs/byte) than the beacon timestamp.
 			 */
-			int rate = local->hw.wiphy->bands[band]->
+			int rate;
+			if (rx_status->flag & RX_FLAG_HT) {
+				rate = 65; /* TODO: HT rates */
+			} else {
+				rate = local->hw.wiphy->bands[band]->
 					bitrates[rx_status->rate_idx].bitrate;
+			}
 			rx_timestamp = rx_status->mactime + (24 * 8 * 10 / rate);
 		} else if (local && local->ops && local->ops->get_tsf)
 			/* second best option: get current TSF */
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 73cf126cef49..b729c005a2b3 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -149,7 +149,17 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
 	pos++;
 
 	/* IEEE80211_RADIOTAP_RATE */
-	*pos = rate->bitrate / 5;
+	if (status->flag & RX_FLAG_HT) {
+		/*
+		 * TODO: add following information into radiotap header once
+		 * suitable fields are defined for it:
+		 * - MCS index (status->rate_idx)
+		 * - HT40 (status->flag & RX_FLAG_40MHZ)
+		 * - short-GI (status->flag & RX_FLAG_SHORT_GI)
+		 */
+		*pos = 0;
+	} else
+		*pos = rate->bitrate / 5;
 	pos++;
 
 	/* IEEE80211_RADIOTAP_CHANNEL */
@@ -1849,9 +1859,15 @@ static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata,
 			if (!(sdata->dev->flags & IFF_PROMISC))
 				return 0;
 			rx->flags &= ~IEEE80211_RX_RA_MATCH;
-		} else if (!rx->sta)
+		} else if (!rx->sta) {
+			int rate_idx;
+			if (rx->status->flag & RX_FLAG_HT)
+				rate_idx = 0; /* TODO: HT rates */
+			else
+				rate_idx = rx->status->rate_idx;
 			rx->sta = ieee80211_ibss_add_sta(sdata, bssid, hdr->addr2,
-				BIT(rx->status->rate_idx));
+				BIT(rate_idx));
+		}
 		break;
 	case NL80211_IFTYPE_MESH_POINT:
 		if (!multicast &&
@@ -2057,7 +2073,13 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 					tid_agg_rx->reorder_buf[index]->cb,
 					sizeof(status));
 				sband = local->hw.wiphy->bands[status.band];
-				rate = &sband->bitrates[status.rate_idx];
+				if (status.flag & RX_FLAG_HT) {
+					/* TODO: HT rates */
+					rate = sband->bitrates;
+				} else {
+					rate = &sband->bitrates
+						[status.rate_idx];
+				}
 				__ieee80211_rx_handle_packet(hw,
 					tid_agg_rx->reorder_buf[index],
 					&status, rate);
@@ -2101,7 +2123,10 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 		memcpy(&status, tid_agg_rx->reorder_buf[index]->cb,
 			sizeof(status));
 		sband = local->hw.wiphy->bands[status.band];
-		rate = &sband->bitrates[status.rate_idx];
+		if (status.flag & RX_FLAG_HT)
+			rate = sband->bitrates; /* TODO: HT rates */
+		else
+			rate = &sband->bitrates[status.rate_idx];
 		__ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index],
 					     &status, rate);
 		tid_agg_rx->stored_mpdu_num--;
@@ -2189,15 +2214,26 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
 	}
 
 	sband = local->hw.wiphy->bands[status->band];
-
-	if (!sband ||
-	    status->rate_idx < 0 ||
-	    status->rate_idx >= sband->n_bitrates) {
+	if (!sband) {
 		WARN_ON(1);
 		return;
 	}
 
-	rate = &sband->bitrates[status->rate_idx];
+	if (status->flag & RX_FLAG_HT) {
+		/* rate_idx is MCS index */
+		if (WARN_ON(status->rate_idx < 0 ||
+			    status->rate_idx >= 76))
+			return;
+		/* HT rates are not in the table - use the highest legacy rate
+		 * for now since other parts of mac80211 may not yet be fully
+		 * MCS aware. */
+		rate = &sband->bitrates[sband->n_bitrates - 1];
+	} else {
+		if (WARN_ON(status->rate_idx < 0 ||
+			    status->rate_idx >= sband->n_bitrates))
+			return;
+		rate = &sband->bitrates[status->rate_idx];
+	}
 
 	/*
 	 * key references and virtual interfaces are protected using RCU

From baad1d921b1565b6f08f60c035531d13ad8afa82 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Fri, 12 Dec 2008 14:38:34 +0200
Subject: [PATCH 05/45] ath9k: Report HT rates in RX status

Fix and clean up the RX status reporting by getting rid of code that
used internal rate tables and ratekbps calculation. The correct value
is now reported with MCS index instead of the old mechanism that
defaulted to using the highest legacy rate.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/recv.c | 61 +++++++++++++------------------
 1 file changed, 26 insertions(+), 35 deletions(-)

diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c
index f2327d8e9c28..cc160fe9f817 100644
--- a/drivers/net/wireless/ath9k/recv.c
+++ b/drivers/net/wireless/ath9k/recv.c
@@ -111,33 +111,6 @@ static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, u32 len)
 	return skb;
 }
 
-static int ath_rate2idx(struct ath_softc *sc, int rate)
-{
-	int i = 0, cur_band, n_rates;
-	struct ieee80211_hw *hw = sc->hw;
-
-	cur_band = hw->conf.channel->band;
-	n_rates = sc->sbands[cur_band].n_bitrates;
-
-	for (i = 0; i < n_rates; i++) {
-		if (sc->sbands[cur_band].bitrates[i].bitrate == rate)
-			break;
-	}
-
-	/*
-	 * NB:mac80211 validates rx rate index against the supported legacy rate
-	 * index only (should be done against ht rates also), return the highest
-	 * legacy rate index for rx rate which does not match any one of the
-	 * supported basic and extended rates to make mac80211 happy.
-	 * The following hack will be cleaned up once the issue with
-	 * the rx rate index validation in mac80211 is fixed.
-	 */
-	if (i == n_rates)
-		return n_rates - 1;
-
-	return i;
-}
-
 /*
  * For Decrypt or Demic errors, we only mark packet status here and always push
  * up the frame up to let mac80211 handle the actual error case, be it no
@@ -147,9 +120,7 @@ static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds,
 			  struct ieee80211_rx_status *rx_status, bool *decrypt_error,
 			  struct ath_softc *sc)
 {
-	struct ath_rate_table *rate_table = sc->cur_rate_table;
 	struct ieee80211_hdr *hdr;
-	int ratekbps, rix;
 	u8 ratecode;
 	__le16 fc;
 
@@ -204,15 +175,36 @@ static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds,
 	}
 
 	ratecode = ds->ds_rxstat.rs_rate;
-	rix = rate_table->rateCodeToIndex[ratecode];
-	ratekbps = rate_table->info[rix].ratekbps;
 
-	/* HT rate */
 	if (ratecode & 0x80) {
+		/* HT rate */
+		rx_status->flag |= RX_FLAG_HT;
 		if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040)
-			ratekbps = (ratekbps * 27) / 13;
+			rx_status->flag |= RX_FLAG_40MHZ;
 		if (ds->ds_rxstat.rs_flags & ATH9K_RX_GI)
-			ratekbps = (ratekbps * 10) / 9;
+			rx_status->flag |= RX_FLAG_SHORT_GI;
+		rx_status->rate_idx = ratecode & 0x7f;
+	} else {
+		int i = 0, cur_band, n_rates;
+		struct ieee80211_hw *hw = sc->hw;
+
+		cur_band = hw->conf.channel->band;
+		n_rates = sc->sbands[cur_band].n_bitrates;
+
+		for (i = 0; i < n_rates; i++) {
+			if (sc->sbands[cur_band].bitrates[i].hw_value ==
+			    ratecode) {
+				rx_status->rate_idx = i;
+				break;
+			}
+
+			if (sc->sbands[cur_band].bitrates[i].hw_value_short ==
+			    ratecode) {
+				rx_status->rate_idx = i;
+				rx_status->flag |= RX_FLAG_SHORTPRE;
+				break;
+			}
+		}
 	}
 
 	rx_status->mactime = ath_extend_tsf(sc, ds->ds_rxstat.rs_tstamp);
@@ -220,7 +212,6 @@ static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds,
 	rx_status->freq =  sc->hw->conf.channel->center_freq;
 	rx_status->noise = sc->sc_ani.sc_noise_floor;
 	rx_status->signal = rx_status->noise + ds->ds_rxstat.rs_rssi;
-	rx_status->rate_idx = ath_rate2idx(sc, (ratekbps / 100));
 	rx_status->antenna = ds->ds_rxstat.rs_antenna;
 
 	/* at 45 you will be able to use MCS 15 reliably. A more elaborate

From 0fe45b1debba7302155b62f3829119a1185a4f5a Mon Sep 17 00:00:00 2001
From: Benoit PAPILLAULT <benoit.papillault@free.fr>
Date: Fri, 12 Dec 2008 15:29:58 +0100
Subject: [PATCH 06/45] ath5k: fix 802.11 header padding on RX, unpadding on TX

Padding the 802.11 header to a multiple of 4 bytes needs to be done only for
frames with a body. This fixes a bug where 2 bytes were missing in monitor
mode for ACK frames. Inspired by a patch from Jouni Malinen on ath9k.

Ref: http://bugzilla.kernel.org/show_bug.cgi?id=12101 :
Signed-off-by: Benoit Papillault <benoit.papillault@free.fr>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath5k/base.c | 38 +++++++++++++++++--------------
 1 file changed, 21 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 0e4317010ed0..9b5f31aab574 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -1668,7 +1668,7 @@ ath5k_tasklet_rx(unsigned long data)
 	struct ath5k_desc *ds;
 	int ret;
 	int hdrlen;
-	int pad;
+	int padsize;
 
 	spin_lock(&sc->rxbuflock);
 	if (list_empty(&sc->rxbuf)) {
@@ -1753,16 +1753,19 @@ accept:
 
 		skb_put(skb, rs.rs_datalen);
 
-		/*
-		 * the hardware adds a padding to 4 byte boundaries between
-		 * the header and the payload data if the header length is
-		 * not multiples of 4 - remove it
-		 */
+		/* The MAC header is padded to have 32-bit boundary if the
+		 * packet payload is non-zero. The general calculation for
+		 * padsize would take into account odd header lengths:
+		 * padsize = (4 - hdrlen % 4) % 4; However, since only
+		 * even-length headers are used, padding can only be 0 or 2
+		 * bytes and we can optimize this a bit. In addition, we must
+		 * not try to remove padding from short control frames that do
+		 * not have payload. */
 		hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-		if (hdrlen & 3) {
-			pad = hdrlen % 4;
-			memmove(skb->data + pad, skb->data, hdrlen);
-			skb_pull(skb, pad);
+		padsize = hdrlen & 3;
+		if (padsize && hdrlen >= 24) {
+			memmove(skb->data + padsize, skb->data, hdrlen);
+			skb_pull(skb, padsize);
 		}
 
 		/*
@@ -2623,7 +2626,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	struct ath5k_buf *bf;
 	unsigned long flags;
 	int hdrlen;
-	int pad;
+	int padsize;
 
 	ath5k_debug_dump_skb(sc, skb, "TX  ", 1);
 
@@ -2635,15 +2638,16 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 * if this is not the case we add the padding after the header
 	 */
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-	if (hdrlen & 3) {
-		pad = hdrlen % 4;
-		if (skb_headroom(skb) < pad) {
+	padsize = hdrlen & 3;
+	if (padsize && hdrlen >= 24) {
+
+		if (skb_headroom(skb) < padsize) {
 			ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
-				" headroom to pad %d\n", hdrlen, pad);
+				  " headroom to pad %d\n", hdrlen, padsize);
 			return -1;
 		}
-		skb_push(skb, pad);
-		memmove(skb->data, skb->data+pad, hdrlen);
+		skb_push(skb, padsize);
+		memmove(skb->data, skb->data+padsize, hdrlen);
 	}
 
 	spin_lock_irqsave(&sc->txbuflock, flags);

From b8d476c8cb64a1640d8762aa442b8a73fa74b7d5 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Fri, 12 Dec 2008 17:08:31 +0200
Subject: [PATCH 07/45] mac80211: Send Layer 2 Update frame on reassociation

When a STA roams back to the same AP before the previous STA entry has
expired, a new STA entry is not added in mac80211. However, a Layer 2
Update frame still needs to be transmitted to update layer 2 devices
about the new location for the STA. Without this, switches may
continue to forward frames to the previous (now incorrect) port when
STA roams between APs.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/cfg.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 3ea0884c9432..9d4e4d846ec1 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -686,6 +686,7 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 	struct sta_info *sta;
 	struct ieee80211_sub_if_data *sdata;
 	int err;
+	int layer2_update;
 
 	/* Prevent a race with changing the rate control algorithm */
 	if (!netif_running(dev))
@@ -716,17 +717,25 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 
 	rate_control_rate_init(sta);
 
+	layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
+		sdata->vif.type == NL80211_IFTYPE_AP;
+
 	rcu_read_lock();
 
 	err = sta_info_insert(sta);
 	if (err) {
 		/* STA has been freed */
+		if (err == -EEXIST && layer2_update) {
+			/* Need to update layer 2 devices on reassociation */
+			sta = sta_info_get(local, mac);
+			if (sta)
+				ieee80211_send_layer2_update(sta);
+		}
 		rcu_read_unlock();
 		return err;
 	}
 
-	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
-	    sdata->vif.type == NL80211_IFTYPE_AP)
+	if (layer2_update)
 		ieee80211_send_layer2_update(sta);
 
 	rcu_read_unlock();

From d5e490362feb648048ef20db9b0b2531d5425775 Mon Sep 17 00:00:00 2001
From: Mohamed Abbas <mohamed.abbas@intel.com>
Date: Fri, 12 Dec 2008 08:22:15 -0800
Subject: [PATCH 08/45] iwlagn: fix agn rate scaling

    Rate scaling in agn can be broken because of these two problems
    1- the LQ command could not sent, we try to call LQ command before
       post association will be rejected, this will cause the driver to
       break in rs_tx_status reporting initial rate does not match.
    2- In rs_rate_init we can get a value of 12, rate 60, for
       last_txrate_idx, this rate only valid in SISO/MIMO mode only

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 26 ++++++++++++++---------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 37b892044a18..f3f17929ca0b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -836,6 +836,10 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
 	    (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate !=
 	     hw->wiphy->bands[info->band]->bitrates[info->status.rates[0].idx].bitrate)) {
 		IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate);
+		/* the last LQ command could failed so the LQ in ucode not
+		 * the same in driver sync up
+		 */
+		iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
 		goto out;
 	}
 
@@ -2167,6 +2171,7 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
 	struct iwl_priv *priv = (struct iwl_priv *)priv_r;
 	struct ieee80211_conf *conf = &priv->hw->conf;
 	struct iwl_lq_sta *lq_sta = priv_sta;
+	u16 mask_bit = 0;
 
 	lq_sta->flush_timer = 0;
 	lq_sta->supp_rates = sta->supp_rates[sband->band];
@@ -2200,16 +2205,6 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
 		priv->assoc_station_added = 1;
 	}
 
-	/* Find highest tx rate supported by hardware and destination station */
-	lq_sta->last_txrate_idx = 3;
-	for (i = 0; i < sband->n_bitrates; i++)
-		if (sta->supp_rates[sband->band] & BIT(i))
-			lq_sta->last_txrate_idx = i;
-
-	/* For MODE_IEEE80211A, skip over cck rates in global rate table */
-	if (sband->band == IEEE80211_BAND_5GHZ)
-		lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
-
 	lq_sta->is_dup = 0;
 	lq_sta->is_green = rs_use_green(priv, conf);
 	lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000);
@@ -2248,6 +2243,17 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
 	lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
 	lq_sta->drv = priv;
 
+	/* Find highest tx rate supported by hardware and destination station */
+	mask_bit = sta->supp_rates[sband->band] & lq_sta->active_legacy_rate;
+	lq_sta->last_txrate_idx = 3;
+	for (i = 0; i < sband->n_bitrates; i++)
+		if (mask_bit & BIT(i))
+			lq_sta->last_txrate_idx = i;
+
+	/* For MODE_IEEE80211A, skip over cck rates in global rate table */
+	if (sband->band == IEEE80211_BAND_5GHZ)
+		lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
+
 	rs_initialize_lq(priv, conf, sta, lq_sta);
 }
 

From 54fdb040b4760d5b2994d15c1371e297679420e9 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Sat, 13 Dec 2008 14:14:20 +0100
Subject: [PATCH 09/45] p54: move statistic timer update routine into a
 workqueue

This patch moves a good chunk of code from the former statistic update
timer routine into a workqueue, which is kindly provided by mac80211.

Also as a nice side-effect we can lay the foundation for other
essential housekeeping features we want to do in the future.
e.g:
 - drain the (clogged) tx_queue.
 - initiate bursts.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54.h       |   5 +-
 drivers/net/wireless/p54/p54common.c | 104 ++++++++++++++++-----------
 drivers/net/wireless/p54/p54common.h |   5 ++
 3 files changed, 68 insertions(+), 46 deletions(-)

diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index d2dbb9e15d97..23b80ef4d015 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -71,6 +71,7 @@ struct p54_edcf_queue_param {
 #define FW_LM20 0x4c4d3230
 
 struct p54_common {
+	struct ieee80211_hw *hw;
 	u32 rx_start;
 	u32 rx_end;
 	struct sk_buff_head tx_queue;
@@ -106,9 +107,7 @@ struct p54_common {
 	struct ieee80211_tx_queue_stats tx_stats[8];
 	struct p54_edcf_queue_param qos_params[8];
 	struct ieee80211_low_level_stats stats;
-	struct timer_list stats_timer;
-	struct completion stats_comp;
-	struct sk_buff *cached_stats;
+	struct delayed_work work;
 	struct sk_buff *cached_beacon;
 	int noise;
 	void *eeprom;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index a4e99b02af02..36310f881874 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -589,6 +589,9 @@ static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
 
 	ieee80211_rx_irqsafe(dev, skb, &rx_status);
 
+	queue_delayed_work(dev->workqueue, &priv->work,
+			   msecs_to_jiffies(P54_STATISTICS_UPDATE));
+
 	return -1;
 }
 
@@ -652,6 +655,27 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
 }
 EXPORT_SYMBOL_GPL(p54_free_skb);
 
+static struct sk_buff *p54_find_tx_entry(struct ieee80211_hw *dev,
+					   __le32 req_id)
+{
+	struct p54_common *priv = dev->priv;
+	struct sk_buff *entry = priv->tx_queue.next;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->tx_queue.lock, flags);
+	while (entry != (struct sk_buff *)&priv->tx_queue) {
+		struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
+
+		if (hdr->req_id == req_id) {
+			spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+			return entry;
+		}
+		entry = entry->next;
+	}
+	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+	return NULL;
+}
+
 static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct p54_common *priv = dev->priv;
@@ -775,8 +799,12 @@ static void p54_rx_stats(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct p54_common *priv = dev->priv;
 	struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
 	struct p54_statistics *stats = (struct p54_statistics *) hdr->data;
-	u32 tsf32 = le32_to_cpu(stats->tsf32);
+	u32 tsf32;
 
+	if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
+		return ;
+
+	tsf32 = le32_to_cpu(stats->tsf32);
 	if (tsf32 < priv->tsf_low32)
 		priv->tsf_high32++;
 	priv->tsf_low32 = tsf32;
@@ -786,9 +814,8 @@ static void p54_rx_stats(struct ieee80211_hw *dev, struct sk_buff *skb)
 	priv->stats.dot11FCSErrorCount = le32_to_cpu(stats->rx_bad_fcs);
 
 	priv->noise = p54_rssi_to_dbm(dev, le32_to_cpu(stats->noise));
-	complete(&priv->stats_comp);
 
-	mod_timer(&priv->stats_timer, jiffies + 5 * HZ);
+	p54_free_skb(dev, p54_find_tx_entry(dev, hdr->req_id));
 }
 
 static void p54_rx_trap(struct ieee80211_hw *dev, struct sk_buff *skb)
@@ -897,6 +924,8 @@ static int p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
 		 * have a few spare slots for control frames left.
 		 */
 		ieee80211_stop_queues(dev);
+		queue_delayed_work(dev->workqueue, &priv->work,
+				   msecs_to_jiffies(P54_TX_TIMEOUT));
 
 		if (unlikely(left == 32)) {
 			/*
@@ -1354,6 +1383,10 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	if (unlikely(p54_assign_address(dev, skb, hdr, skb->len + tim_len)))
 		goto err;
 	priv->tx(dev, skb, 0);
+
+	queue_delayed_work(dev->workqueue, &priv->work,
+			   msecs_to_jiffies(P54_TX_FRAME_LIFETIME));
+
 	return 0;
 
  err:
@@ -1579,20 +1612,6 @@ static int p54_set_edcf(struct ieee80211_hw *dev)
 	return 0;
 }
 
-static int p54_init_stats(struct ieee80211_hw *dev)
-{
-	struct p54_common *priv = dev->priv;
-
-	priv->cached_stats = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL,
-			sizeof(struct p54_hdr) + sizeof(struct p54_statistics),
-			P54_CONTROL_TYPE_STAT_READBACK, GFP_KERNEL);
-	if (!priv->cached_stats)
-			return -ENOMEM;
-
-	mod_timer(&priv->stats_timer, jiffies + HZ);
-	return 0;
-}
-
 static int p54_beacon_tim(struct sk_buff *skb)
 {
 	/*
@@ -1684,9 +1703,6 @@ static int p54_start(struct ieee80211_hw *dev)
 	P54_SET_QUEUE(priv->qos_params[2], 0x0003, 0x000f, 0x03ff, 0);
 	P54_SET_QUEUE(priv->qos_params[3], 0x0007, 0x000f, 0x03ff, 0);
 	err = p54_set_edcf(dev);
-	if (err)
-		goto out;
-	err = p54_init_stats(dev);
 	if (err)
 		goto out;
 
@@ -1698,6 +1714,8 @@ static int p54_start(struct ieee80211_hw *dev)
 		goto out;
 	}
 
+	queue_delayed_work(dev->workqueue, &priv->work, 0);
+
 out:
 	mutex_unlock(&priv->conf_mutex);
 	return err;
@@ -1710,9 +1728,7 @@ static void p54_stop(struct ieee80211_hw *dev)
 
 	mutex_lock(&priv->conf_mutex);
 	priv->mode = NL80211_IFTYPE_UNSPECIFIED;
-	del_timer(&priv->stats_timer);
-	p54_free_skb(dev, priv->cached_stats);
-	priv->cached_stats = NULL;
+	cancel_delayed_work_sync(&priv->work);
 	if (priv->cached_beacon)
 		p54_tx_cancel(dev, priv->cached_beacon);
 
@@ -1889,14 +1905,29 @@ static int p54_init_xbow_synth(struct ieee80211_hw *dev)
 	return 0;
 }
 
-static void p54_statistics_timer(unsigned long data)
+static void p54_work(struct work_struct *work)
 {
-	struct ieee80211_hw *dev = (struct ieee80211_hw *) data;
-	struct p54_common *priv = dev->priv;
+	struct p54_common *priv = container_of(work, struct p54_common,
+					       work.work);
+	struct ieee80211_hw *dev = priv->hw;
+	struct sk_buff *skb;
 
-	BUG_ON(!priv->cached_stats);
+	if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
+		return ;
 
-	priv->tx(dev, priv->cached_stats, 0);
+	/*
+	 * TODO: walk through tx_queue and do the following tasks
+	 * 	1. initiate bursts.
+	 *      2. cancel stuck frames / reset the device if necessary.
+	 */
+
+	skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL, sizeof(struct p54_hdr) +
+			    sizeof(struct p54_statistics),
+			    P54_CONTROL_TYPE_STAT_READBACK, GFP_KERNEL);
+	if (!skb)
+		return ;
+
+	priv->tx(dev, skb, 0);
 }
 
 static int p54_get_stats(struct ieee80211_hw *dev,
@@ -1904,17 +1935,7 @@ static int p54_get_stats(struct ieee80211_hw *dev,
 {
 	struct p54_common *priv = dev->priv;
 
-	del_timer(&priv->stats_timer);
-	p54_statistics_timer((unsigned long)dev);
-
-	if (!wait_for_completion_interruptible_timeout(&priv->stats_comp, HZ)) {
-		printk(KERN_ERR "%s: device does not respond!\n",
-			wiphy_name(dev->wiphy));
-		return -EBUSY;
-	}
-
 	memcpy(stats, &priv->stats, sizeof(*stats));
-
 	return 0;
 }
 
@@ -2072,6 +2093,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
 		return NULL;
 
 	priv = dev->priv;
+	priv->hw = dev;
 	priv->mode = NL80211_IFTYPE_UNSPECIFIED;
 	priv->basic_rate_mask = 0x15f;
 	skb_queue_head_init(&priv->tx_queue);
@@ -2107,9 +2129,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
 
 	mutex_init(&priv->conf_mutex);
 	init_completion(&priv->eeprom_comp);
-	init_completion(&priv->stats_comp);
-	setup_timer(&priv->stats_timer, p54_statistics_timer,
-		(unsigned long)dev);
+	INIT_DELAYED_WORK(&priv->work, p54_work);
 
 	return dev;
 }
@@ -2118,8 +2138,6 @@ EXPORT_SYMBOL_GPL(p54_init_common);
 void p54_free_common(struct ieee80211_hw *dev)
 {
 	struct p54_common *priv = dev->priv;
-	del_timer(&priv->stats_timer);
-	kfree_skb(priv->cached_stats);
 	kfree(priv->iq_autocal);
 	kfree(priv->output_limit);
 	kfree(priv->curve_data);
diff --git a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h
index 5a68fdae7730..06e1643cc295 100644
--- a/drivers/net/wireless/p54/p54common.h
+++ b/drivers/net/wireless/p54/p54common.h
@@ -355,6 +355,11 @@ struct p54_tx_data {
 	u8 align[0];
 } __attribute__ ((packed));
 
+/* unit is ms */
+#define P54_TX_FRAME_LIFETIME 2000
+#define P54_TX_TIMEOUT 4000
+#define P54_STATISTICS_UPDATE 5000
+
 #define P54_FILTER_TYPE_NONE		0
 #define P54_FILTER_TYPE_STATION		BIT(0)
 #define P54_FILTER_TYPE_IBSS		BIT(1)

From ee370ceda823435fe75be7dd4ed7b0e3dc3108b9 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Sat, 13 Dec 2008 16:45:38 +0100
Subject: [PATCH 10/45] p54: update ACK failure statistic counter in real-time

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54common.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 36310f881874..ddb858608a50 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -720,6 +720,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 		entry_hdr = (struct p54_hdr *) entry->data;
 		entry_data = (struct p54_tx_data *) entry_hdr->data;
 		priv->tx_stats[entry_data->hw_queue].len--;
+		priv->stats.dot11ACKFailureCount += payload->tries - 1;
 
 		if (unlikely(entry == priv->cached_beacon)) {
 			kfree_skb(entry);

From 23827926eb5ce5cb944ebbd96d22297a2582d45d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Sat, 13 Dec 2008 21:33:13 +0200
Subject: [PATCH 11/45] libertas: use roundup instead of opencoding
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/if_sdio.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index b54e2ea8346b..4519d7314f47 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -26,6 +26,7 @@
  * if_sdio_card_to_host() to pad the data.
  */
 
+#include <linux/kernel.h>
 #include <linux/moduleparam.h>
 #include <linux/firmware.h>
 #include <linux/netdevice.h>
@@ -581,7 +582,7 @@ static int if_sdio_prog_real(struct if_sdio_card *card)
 				chunk_size, (chunk_size + 31) / 32 * 32);
 */
 			ret = sdio_writesb(card->func, card->ioport,
-				chunk_buffer, (chunk_size + 31) / 32 * 32);
+				chunk_buffer, roundup(chunk_size, 32));
 			if (ret)
 				goto release;
 

From da9f57eade0a743450a201645db7fc5ac0809900 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sat, 13 Dec 2008 18:09:56 -0600
Subject: [PATCH 12/45] rtl8187: Fix error returns

There are two places in the rtl8187 code where a routine was returning zero
(OK) when it should have been returning an error.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8187_dev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 74f5449b7924..3900c479b4e7 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -213,7 +213,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
 		kfree_skb(skb);
-		return 0;
+		return -ENOMEM;
 	}
 
 	flags = skb->len;
@@ -281,7 +281,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	}
 	usb_free_urb(urb);
 
-	return 0;
+	return rc;
 }
 
 static void rtl8187_rx_cb(struct urb *urb)

From 69ba3e5d74a467a64248cd90ccafb524b1fddcb5 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Sun, 14 Dec 2008 14:45:30 +0100
Subject: [PATCH 13/45] p54: more accurate rssi to dBm conversion

This patch replaces the static rssi auto calibration data
with more precise values out of the device's eeprom.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54.h       |  8 ++++
 drivers/net/wireless/p54/p54common.c | 69 ++++++++++++++++++++--------
 drivers/net/wireless/p54/p54common.h | 17 +++----
 3 files changed, 68 insertions(+), 26 deletions(-)

diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index 23b80ef4d015..e0a68815a471 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -61,6 +61,13 @@ struct p54_edcf_queue_param {
 	__le16 txop;
 } __attribute__ ((packed));
 
+struct p54_rssi_linear_approximation {
+	s16 mul;
+	s16 add;
+	s16 longbow_unkn;
+	s16 longbow_unk2;
+};
+
 #define EEPROM_READBACK_LEN 0x3fc
 
 #define ISL38XX_DEV_FIRMWARE_ADDR 0x20000
@@ -91,6 +98,7 @@ struct p54_common {
 	struct pda_channel_output_limit *output_limit;
 	unsigned int output_limit_len;
 	struct pda_pa_curve_data *curve_data;
+	struct p54_rssi_linear_approximation rssical_db[IEEE80211_NUM_BANDS];
 	unsigned int filter_flags;
 	bool use_short_slot;
 	u16 rxhw;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index ddb858608a50..05eb677aa3e1 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -335,6 +335,36 @@ static const char *p54_rf_chips[] = { "NULL", "Duette3", "Duette2",
                               "Frisbee", "Xbow", "Longbow", "NULL", "NULL" };
 static int p54_init_xbow_synth(struct ieee80211_hw *dev);
 
+static void p54_parse_rssical(struct ieee80211_hw *dev, void *data, int len,
+			     u16 type)
+{
+	struct p54_common *priv = dev->priv;
+	int offset = (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) ? 2 : 0;
+	int entry_size = sizeof(struct pda_rssi_cal_entry) + offset;
+	int num_entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2;
+	int i;
+
+	if (len != (entry_size * num_entries)) {
+		printk(KERN_ERR "%s: unknown rssi calibration data packing "
+				 " type:(%x) len:%d.\n",
+		       wiphy_name(dev->wiphy), type, len);
+
+		print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE,
+				     data, len);
+
+		printk(KERN_ERR "%s: please report this issue.\n",
+			wiphy_name(dev->wiphy));
+		return;
+	}
+
+	for (i = 0; i < num_entries; i++) {
+		struct pda_rssi_cal_entry *cal = data +
+						 (offset + i * entry_size);
+		priv->rssical_db[i].mul = (s16) le16_to_cpu(cal->mul);
+		priv->rssical_db[i].add = (s16) le16_to_cpu(cal->add);
+	}
+}
+
 static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 {
 	struct p54_common *priv = dev->priv;
@@ -434,6 +464,12 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 		case PDR_HARDWARE_PLATFORM_COMPONENT_ID:
 			priv->version = *(u8 *)(entry->data + 1);
 			break;
+		case PDR_RSSI_LINEAR_APPROXIMATION:
+		case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND:
+		case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED:
+			p54_parse_rssical(dev, entry->data, data_len,
+					  le16_to_cpu(entry->code));
+			break;
 		case PDR_END:
 			/* make it overrun */
 			entry_len = len;
@@ -453,10 +489,7 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 		case PDR_DEFAULT_COUNTRY:
 		case PDR_ANTENNA_GAIN:
 		case PDR_PRISM_INDIGO_PA_CALIBRATION_DATA:
-		case PDR_RSSI_LINEAR_APPROXIMATION:
-		case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND:
 		case PDR_REGULATORY_POWER_LIMITS:
-		case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED:
 		case PDR_RADIATED_TRANSMISSION_CORRECTION:
 		case PDR_PRISM_TX_IQ_CALIBRATION:
 		case PDR_BASEBAND_REGISTERS:
@@ -527,8 +560,11 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 
 static int p54_rssi_to_dbm(struct ieee80211_hw *dev, int rssi)
 {
-	/* TODO: get the rssi_add & rssi_mul data from the eeprom */
-	return ((rssi * 0x83) / 64 - 400) / 4;
+	struct p54_common *priv = dev->priv;
+	int band = dev->conf.channel->band;
+
+	return ((rssi * priv->rssical_db[band].mul) / 64 +
+			 priv->rssical_db[band].add) / 4;
 }
 
 static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
@@ -1466,15 +1502,15 @@ static int p54_setup_mac(struct ieee80211_hw *dev)
 	return 0;
 }
 
-static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell,
-		    u16 frequency)
+static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell)
 {
 	struct p54_common *priv = dev->priv;
 	struct sk_buff *skb;
 	struct p54_scan *chan;
 	unsigned int i;
 	void *entry;
-	__le16 freq = cpu_to_le16(frequency);
+	__le16 freq = cpu_to_le16(dev->conf.channel->center_freq);
+	int band = dev->conf.channel->band;
 
 	skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*chan) +
 			    sizeof(struct p54_hdr), P54_CONTROL_TYPE_SCAN,
@@ -1535,11 +1571,11 @@ static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell,
 	}
 
 	if (priv->fw_var < 0x500) {
-		chan->v1.rssical_mul = cpu_to_le16(130);
-		chan->v1.rssical_add = cpu_to_le16(0xfe70);
+		chan->v1_rssi.mul = cpu_to_le16(priv->rssical_db[band].mul);
+		chan->v1_rssi.add = cpu_to_le16(priv->rssical_db[band].add);
 	} else {
-		chan->v2.rssical_mul = cpu_to_le16(130);
-		chan->v2.rssical_add = cpu_to_le16(0xfe70);
+		chan->v2.rssi.mul = cpu_to_le16(priv->rssical_db[band].mul);
+		chan->v2.rssi.add = cpu_to_le16(priv->rssical_db[band].add);
 		chan->v2.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask);
 		memset(chan->v2.rts_rates, 0, 8);
 	}
@@ -1801,8 +1837,7 @@ static int p54_config(struct ieee80211_hw *dev, u32 changed)
 			goto out;
 	}
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		ret = p54_scan(dev, P54_SCAN_EXIT, 0,
-			       conf->channel->center_freq);
+		ret = p54_scan(dev, P54_SCAN_EXIT, 0);
 		if (ret)
 			goto out;
 	}
@@ -1828,8 +1863,7 @@ static int p54_config_interface(struct ieee80211_hw *dev,
 	}
 
 	if (conf->changed & IEEE80211_IFCC_BEACON) {
-		ret = p54_scan(dev, P54_SCAN_EXIT, 0,
-			       dev->conf.channel->center_freq);
+		ret = p54_scan(dev, P54_SCAN_EXIT, 0);
 		if (ret)
 			goto out;
 		ret = p54_setup_mac(dev);
@@ -1968,8 +2002,7 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev,
 			priv->basic_rate_mask = info->basic_rates;
 		p54_setup_mac(dev);
 		if (priv->fw_var >= 0x500)
-			p54_scan(dev, P54_SCAN_EXIT, 0,
-				 dev->conf.channel->center_freq);
+			p54_scan(dev, P54_SCAN_EXIT, 0);
 	}
 	if (changed & BSS_CHANGED_ASSOC) {
 		if (info->assoc) {
diff --git a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h
index 06e1643cc295..6c824e40f3ba 100644
--- a/drivers/net/wireless/p54/p54common.h
+++ b/drivers/net/wireless/p54/p54common.h
@@ -178,6 +178,11 @@ struct pda_pa_curve_data {
 	u8 data[0];
 } __attribute__ ((packed));
 
+struct pda_rssi_cal_entry {
+	__le16 mul;
+	__le16 add;
+} __attribute__ ((packed));
+
 /*
  * this defines the PDR codes used to build PDAs as defined in document
  * number 553155. The current implementation mirrors version 1.1 of the
@@ -429,22 +434,18 @@ struct p54_scan {
 	u8 dup_16qam;
 	u8 dup_64qam;
 	union {
-		struct {
-			__le16 rssical_mul;
-			__le16 rssical_add;
-		} v1 __attribute__ ((packed));
+		struct pda_rssi_cal_entry v1_rssi;
 
 		struct {
 			__le32 basic_rate_mask;
 			u8 rts_rates[8];
-			__le16 rssical_mul;
-			__le16 rssical_add;
+			struct pda_rssi_cal_entry rssi;
 		} v2 __attribute__ ((packed));
 	} __attribute__ ((packed));
 } __attribute__ ((packed));
 
-#define P54_SCAN_V1_LEN (sizeof(struct p54_scan)-12)
-#define P54_SCAN_V2_LEN (sizeof(struct p54_scan))
+#define P54_SCAN_V1_LEN 0x70
+#define P54_SCAN_V2_LEN 0x7c
 
 struct p54_led {
 	__le16 mode;

From 0a5ec96ad68516582023a877aceff9db7636d141 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Sun, 14 Dec 2008 15:05:42 +0100
Subject: [PATCH 14/45] p54: remove free_on_tx parameter

This patch simplifies the tx code a bit and will be necessary for
the upcoming stlc45xx<->p54 port.

In detail: we no longer have to tell all back-end drivers directly,
if we want to free a frame right after it was send to the firmware,
or if we do it in the library callback later.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54.h       | 10 ++++++--
 drivers/net/wireless/p54/p54common.c | 26 +++++++++----------
 drivers/net/wireless/p54/p54common.h |  3 ---
 drivers/net/wireless/p54/p54pci.c    | 12 ++++-----
 drivers/net/wireless/p54/p54usb.c    | 37 +++++++++-------------------
 5 files changed, 37 insertions(+), 51 deletions(-)

diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index e0a68815a471..ab79e32f0b27 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -44,6 +44,9 @@ enum p54_control_frame_types {
 	P54_CONTROL_TYPE_BT_OPTIONS = 35
 };
 
+#define P54_HDR_FLAG_CONTROL		BIT(15)
+#define P54_HDR_FLAG_CONTROL_OPSET	(BIT(15) + BIT(0))
+
 struct p54_hdr {
 	__le16 flags;
 	__le16 len;
@@ -54,6 +57,10 @@ struct p54_hdr {
 	u8 data[0];
 } __attribute__ ((packed));
 
+#define FREE_AFTER_TX(skb)						\
+	((((struct p54_hdr *) ((struct sk_buff *) skb)->data)->		\
+	flags) == cpu_to_le16(P54_HDR_FLAG_CONTROL_OPSET))
+
 struct p54_edcf_queue_param {
 	__le16 aifs;
 	__le16 cwmin;
@@ -82,8 +89,7 @@ struct p54_common {
 	u32 rx_start;
 	u32 rx_end;
 	struct sk_buff_head tx_queue;
-	void (*tx)(struct ieee80211_hw *dev, struct sk_buff *skb,
-		   int free_on_tx);
+	void (*tx)(struct ieee80211_hw *dev, struct sk_buff *skb);
 	int (*open)(struct ieee80211_hw *dev);
 	void (*stop)(struct ieee80211_hw *dev);
 	int mode;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 05eb677aa3e1..82354b974a04 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -683,7 +683,7 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
 		freed = priv->rx_end - last_addr;
 	__skb_unlink(skb, &priv->tx_queue);
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
-	kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 
 	if (freed >= priv->headroom + sizeof(struct p54_hdr) + 48 +
 		     IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom)
@@ -1088,7 +1088,7 @@ int p54_read_eeprom(struct ieee80211_hw *dev)
 			eeprom_hdr->v2.magic2 = 0xf;
 			memcpy(eeprom_hdr->v2.magic, (const char *)"LOCK", 4);
 		}
-		priv->tx(dev, skb, 0);
+		priv->tx(dev, skb);
 
 		if (!wait_for_completion_interruptible_timeout(&priv->eeprom_comp, HZ)) {
 			printk(KERN_ERR "%s: device does not respond!\n",
@@ -1129,7 +1129,7 @@ static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta,
 	tim = (struct p54_tim *) skb_put(skb, sizeof(*tim));
 	tim->count = 1;
 	tim->entry[0] = cpu_to_le16(set ? (sta->aid | 0x8000) : sta->aid);
-	priv->tx(dev, skb, 1);
+	priv->tx(dev, skb);
 	return 0;
 }
 
@@ -1147,7 +1147,7 @@ static int p54_sta_unlock(struct ieee80211_hw *dev, u8 *addr)
 
 	sta = (struct p54_sta_unlock *)skb_put(skb, sizeof(*sta));
 	memcpy(sta->addr, addr, ETH_ALEN);
-	priv->tx(dev, skb, 1);
+	priv->tx(dev, skb);
 	return 0;
 }
 
@@ -1190,7 +1190,7 @@ static int p54_tx_cancel(struct ieee80211_hw *dev, struct sk_buff *entry)
 	hdr = (void *)entry->data;
 	cancel = (struct p54_txcancel *)skb_put(skb, sizeof(*cancel));
 	cancel->req_id = hdr->req_id;
-	priv->tx(dev, skb, 1);
+	priv->tx(dev, skb);
 	return 0;
 }
 
@@ -1419,7 +1419,7 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	/* modifies skb->cb and with it info, so must be last! */
 	if (unlikely(p54_assign_address(dev, skb, hdr, skb->len + tim_len)))
 		goto err;
-	priv->tx(dev, skb, 0);
+	priv->tx(dev, skb);
 
 	queue_delayed_work(dev->workqueue, &priv->work,
 			   msecs_to_jiffies(P54_TX_FRAME_LIFETIME));
@@ -1498,7 +1498,7 @@ static int p54_setup_mac(struct ieee80211_hw *dev)
 		setup->v2.lpf_bandwidth = cpu_to_le16(65535);
 		setup->v2.osc_start_delay = cpu_to_le16(65535);
 	}
-	priv->tx(dev, skb, 1);
+	priv->tx(dev, skb);
 	return 0;
 }
 
@@ -1579,7 +1579,7 @@ static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell)
 		chan->v2.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask);
 		memset(chan->v2.rts_rates, 0, 8);
 	}
-	priv->tx(dev, skb, 1);
+	priv->tx(dev, skb);
 	return 0;
 
  err:
@@ -1605,7 +1605,7 @@ static int p54_set_leds(struct ieee80211_hw *dev, int mode, int link, int act)
 	led->led_permanent = cpu_to_le16(link);
 	led->led_temporary = cpu_to_le16(act);
 	led->duration = cpu_to_le16(1000);
-	priv->tx(dev, skb, 1);
+	priv->tx(dev, skb);
 	return 0;
 }
 
@@ -1645,7 +1645,7 @@ static int p54_set_edcf(struct ieee80211_hw *dev)
 	edcf->flags = 0;
 	memset(edcf->mapping, 0, sizeof(edcf->mapping));
 	memcpy(edcf->queue, priv->qos_params, sizeof(edcf->queue));
-	priv->tx(dev, skb, 1);
+	priv->tx(dev, skb);
 	return 0;
 }
 
@@ -1936,7 +1936,7 @@ static int p54_init_xbow_synth(struct ieee80211_hw *dev)
 	xbow->magic2 = cpu_to_le16(0x2);
 	xbow->freq = cpu_to_le16(5390);
 	memset(xbow->padding, 0, sizeof(xbow->padding));
-	priv->tx(dev, skb, 1);
+	priv->tx(dev, skb);
 	return 0;
 }
 
@@ -1962,7 +1962,7 @@ static void p54_work(struct work_struct *work)
 	if (!skb)
 		return ;
 
-	priv->tx(dev, skb, 0);
+	priv->tx(dev, skb);
 }
 
 static int p54_get_stats(struct ieee80211_hw *dev,
@@ -2094,7 +2094,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
 			[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY]), 8);
 	}
 
-	priv->tx(dev, skb, 1);
+	priv->tx(dev, skb);
 	mutex_unlock(&priv->conf_mutex);
 	return 0;
 }
diff --git a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h
index 6c824e40f3ba..f5729de83fe1 100644
--- a/drivers/net/wireless/p54/p54common.h
+++ b/drivers/net/wireless/p54/p54common.h
@@ -84,9 +84,6 @@ struct bootrec_desc {
 #define BR_CODE_END_OF_BRA		0xFF0000FF
 #define LEGACY_BR_CODE_END_OF_BRA	0xFFFFFFFF
 
-#define P54_HDR_FLAG_CONTROL		BIT(15)
-#define P54_HDR_FLAG_CONTROL_OPSET	(BIT(15) + BIT(0))
-
 #define P54_HDR_FLAG_DATA_ALIGN		BIT(14)
 #define P54_HDR_FLAG_DATA_OUT_PROMISC	BIT(0)
 #define P54_HDR_FLAG_DATA_OUT_TIMESTAMP BIT(1)
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index c28220e401b9..aa367a0ddc49 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -227,7 +227,9 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index,
 
 	while (i != idx) {
 		desc = &ring[i];
-		p54_free_skb(dev, tx_buf[i]);
+		if (tx_buf[i])
+			if (FREE_AFTER_TX((struct sk_buff *) tx_buf[i]))
+				p54_free_skb(dev, tx_buf[i]);
 		tx_buf[i] = NULL;
 
 		pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr),
@@ -298,8 +300,7 @@ static irqreturn_t p54p_interrupt(int irq, void *dev_id)
 	return reg ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
-		    int free_on_tx)
+static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct p54p_priv *priv = dev->priv;
 	struct p54p_ring_control *ring_control = priv->ring_control;
@@ -314,6 +315,7 @@ static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
 	idx = le32_to_cpu(ring_control->host_idx[1]);
 	i = idx % ARRAY_SIZE(ring_control->tx_data);
 
+	priv->tx_buf_data[i] = skb;
 	mapping = pci_map_single(priv->pdev, skb->data, skb->len,
 				 PCI_DMA_TODEVICE);
 	desc = &ring_control->tx_data[i];
@@ -324,10 +326,6 @@ static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
 
 	wmb();
 	ring_control->host_idx[1] = cpu_to_le32(idx + 1);
-
-	if (free_on_tx)
-		priv->tx_buf_data[i] = skb;
-
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index c2789e53b984..17f89c7eb098 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -138,22 +138,16 @@ static void p54u_rx_cb(struct urb *urb)
 	}
 }
 
-static void p54u_tx_reuse_skb_cb(struct urb *urb)
-{
-	struct sk_buff *skb = urb->context;
-	struct p54u_priv *priv = (struct p54u_priv *)((struct ieee80211_hw *)
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)))->priv;
-
-	skb_pull(skb, priv->common.tx_hdr_len);
-}
-
-static void p54u_tx_free_skb_cb(struct urb *urb)
+static void p54u_tx_cb(struct urb *urb)
 {
 	struct sk_buff *skb = urb->context;
 	struct ieee80211_hw *dev = (struct ieee80211_hw *)
 		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+	struct p54u_priv *priv = dev->priv;
 
-	p54_free_skb(dev, skb);
+	skb_pull(skb, priv->common.tx_hdr_len);
+	if (FREE_AFTER_TX(skb))
+		p54_free_skb(dev, skb);
 }
 
 static void p54u_tx_dummy_cb(struct urb *urb) { }
@@ -213,8 +207,7 @@ static int p54u_init_urbs(struct ieee80211_hw *dev)
 	return ret;
 }
 
-static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb,
-			 int free_on_tx)
+static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct p54u_priv *priv = dev->priv;
 	struct urb *addr_urb, *data_urb;
@@ -236,9 +229,7 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb,
 			  p54u_tx_dummy_cb, dev);
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len,
-			  free_on_tx ? p54u_tx_free_skb_cb :
-				       p54u_tx_reuse_skb_cb, skb);
+			  skb->data, skb->len, p54u_tx_cb, skb);
 
 	usb_anchor_urb(addr_urb, &priv->submitted);
 	err = usb_submit_urb(addr_urb, GFP_ATOMIC);
@@ -273,8 +264,7 @@ static __le32 p54u_lm87_chksum(const __le32 *data, size_t length)
 	return cpu_to_le32(chk);
 }
 
-static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb,
-			 int free_on_tx)
+static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct p54u_priv *priv = dev->priv;
 	struct urb *data_urb;
@@ -293,9 +283,7 @@ static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb,
 
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len,
-			  free_on_tx ? p54u_tx_free_skb_cb :
-				       p54u_tx_reuse_skb_cb, skb);
+			  skb->data, skb->len, p54u_tx_cb, skb);
 
 	usb_anchor_urb(data_urb, &priv->submitted);
 	if (usb_submit_urb(data_urb, GFP_ATOMIC)) {
@@ -306,8 +294,7 @@ static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb,
 	usb_free_urb(data_urb);
 }
 
-static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb,
-			    int free_on_tx)
+static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct p54u_priv *priv = dev->priv;
 	struct urb *int_urb, *data_urb;
@@ -354,9 +341,7 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb,
 
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len,
-			  free_on_tx ? p54u_tx_free_skb_cb :
-				       p54u_tx_reuse_skb_cb, skb);
+			  skb->data, skb->len, p54u_tx_cb, skb);
 
 	usb_anchor_urb(int_urb, &priv->submitted);
 	err = usb_submit_urb(int_urb, GFP_ATOMIC);

From d85882273367e98aecb9ff11a9d76515a6d37131 Mon Sep 17 00:00:00 2001
From: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Date: Sun, 14 Dec 2008 12:18:09 -0600
Subject: [PATCH 15/45] rtl8187: Fix crash on unload when using SLUB debug

Reported-by: Hin-Tak Leung <htl10@users.sourceforge.net>

After the code was modified to use urb anchors ("rtl8187: Use usb anchor
facilities to manage urbs"), rtl8187 began generating an intermittent GPF
on shutdown when using SLUB with debugging enabled. Furthermore, rebooting
the system with a ping running caused a GPF every time. There are two problems:
(1) incorrect locking in the rtl8187_rx_cb() routine, a pre-existing bug that
apparently had not been triggered before, and (2) duplicate freeing of receive
skbs that was probably introduced with the change to anchors.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8187_dev.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 3900c479b4e7..00ce3ef39abe 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -294,15 +294,16 @@ static void rtl8187_rx_cb(struct urb *urb)
 	int rate, signal;
 	u32 flags;
 	u32 quality;
+	unsigned long f;
 
-	spin_lock(&priv->rx_queue.lock);
+	spin_lock_irqsave(&priv->rx_queue.lock, f);
 	if (skb->next)
 		__skb_unlink(skb, &priv->rx_queue);
 	else {
-		spin_unlock(&priv->rx_queue.lock);
+		spin_unlock_irqrestore(&priv->rx_queue.lock, f);
 		return;
 	}
-	spin_unlock(&priv->rx_queue.lock);
+	spin_unlock_irqrestore(&priv->rx_queue.lock, f);
 	skb_put(skb, urb->actual_length);
 
 	if (unlikely(urb->status)) {
@@ -942,7 +943,6 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 static void rtl8187_stop(struct ieee80211_hw *dev)
 {
 	struct rtl8187_priv *priv = dev->priv;
-	struct rtl8187_rx_info *info;
 	struct sk_buff *skb;
 	u32 reg;
 
@@ -961,10 +961,6 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
 	rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 
-	while ((skb = skb_dequeue(&priv->rx_queue))) {
-		info = (struct rtl8187_rx_info *)skb->cb;
-		kfree_skb(skb);
-	}
 	while ((skb = skb_dequeue(&priv->b_tx_status.queue)))
 		dev_kfree_skb_any(skb);
 

From 8d6f658e211a3c6ff808f7fc6ebb30239457eabc Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Mon, 15 Dec 2008 10:37:50 +0200
Subject: [PATCH 16/45] mac80211: Remove radiotap rate-present flag for HT

Since we do not currently report HT rates (MCS index) in radiotap
header for HT rates, we should not claim the rate is present. The rate
octet itself is used as padding in this case, so only the it_present
flag needs to be removed in case of HT rates.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/rx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index b729c005a2b3..7175ae80c36a 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -123,7 +123,6 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
 	/* radiotap header, set always present flags */
 	rthdr->it_present =
 		cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) |
-			    (1 << IEEE80211_RADIOTAP_RATE) |
 			    (1 << IEEE80211_RADIOTAP_CHANNEL) |
 			    (1 << IEEE80211_RADIOTAP_ANTENNA) |
 			    (1 << IEEE80211_RADIOTAP_RX_FLAGS));
@@ -158,8 +157,10 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
 		 * - short-GI (status->flag & RX_FLAG_SHORT_GI)
 		 */
 		*pos = 0;
-	} else
+	} else {
+		rthdr->it_present |= (1 << IEEE80211_RADIOTAP_RATE);
 		*pos = rate->bitrate / 5;
+	}
 	pos++;
 
 	/* IEEE80211_RADIOTAP_CHANNEL */

From da027ca00a48715364da9a94d4b663029add528d Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Mon, 15 Dec 2008 15:44:53 +0200
Subject: [PATCH 17/45] ath9k: Fix TX status reporting for retries and MCS
 index

The count field in struct ieee80211_tx_rate does not include the final
successful attempt, so only report retries here.

Fix the struct ieee80211_tx_rate::idx field when MCS was used. It is
supposed to be the MCS index, not an internal index to the rate
control algorithm table.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/xmit.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index f9c309ed3a2d..d6d402c18934 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -125,7 +125,15 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 		tx_info->flags |= IEEE80211_TX_STAT_ACK;
 	}
 
-	tx_info->status.rates[0].count = tx_status->retries + 1;
+	tx_info->status.rates[0].count = tx_status->retries;
+	if (tx_info->status.rates[0].flags & IEEE80211_TX_RC_MCS) {
+		/* Change idx from internal table index to MCS index */
+		int idx = tx_info->status.rates[0].idx;
+		struct ath_rate_table *rate_table = sc->cur_rate_table;
+		if (idx >= 0 && idx < rate_table->rate_cnt)
+			tx_info->status.rates[0].idx =
+				rate_table->info[idx].ratecode & 0x7f;
+	}
 
 	ieee80211_tx_status(hw, skb);
 }

From f7a276a625e0b980185d2eb8e8e3e9425a708bee Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Mon, 15 Dec 2008 16:02:04 +0200
Subject: [PATCH 18/45] ath9k: Remove MAC header pad before reporting TX status

Remove the possible MAC header pad before reporting TX status to
mac80211. This pad is hardware specific operation and should not be
exposed outside the driver. This fixes the frame body in monitor
interfaces that could be used to check on TX status for transmitted
frames.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/xmit.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index d6d402c18934..3bfc3b90f256 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -106,6 +106,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 	struct ieee80211_hw *hw = sc->hw;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
+	int hdrlen, padsize;
 
 	DPRINTF(sc, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb);
 
@@ -135,6 +136,17 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 				rate_table->info[idx].ratecode & 0x7f;
 	}
 
+	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+	padsize = hdrlen & 3;
+	if (padsize && hdrlen >= 24) {
+		/*
+		 * Remove MAC header padding before giving the frame back to
+		 * mac80211.
+		 */
+		memmove(skb->data + padsize, skb->data, hdrlen);
+		skb_pull(skb, padsize);
+	}
+
 	ieee80211_tx_status(hw, skb);
 }
 

From 9bf9fca8dea70116016d32c2bf3f83170c8fba76 Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Date: Mon, 15 Dec 2008 20:40:46 +0530
Subject: [PATCH 19/45] ath9k: Synchronize DMA transfer with CPU at right place

This patch does pci_dma_sync_single_for_cpu() before accessing
the header of the frame and queueing the same buffer into h/w.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/recv.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c
index cc160fe9f817..462e08c3d09d 100644
--- a/drivers/net/wireless/ath9k/recv.c
+++ b/drivers/net/wireless/ath9k/recv.c
@@ -519,6 +519,15 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 		if (!skb)
 			continue;
 
+		/*
+		 * Synchronize the DMA transfer with CPU before
+		 * 1. accessing the frame
+		 * 2. requeueing the same buffer to h/w
+		 */
+		pci_dma_sync_single_for_cpu(sc->pdev, bf->bf_buf_addr,
+				sc->rx.bufsize,
+				PCI_DMA_FROMDEVICE);
+
 		/*
 		 * If we're asked to flush receive queue, directly
 		 * chain it back at the queue without processing it.
@@ -547,10 +556,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 		if (!requeue_skb)
 			goto requeue;
 
-		/* Sync and unmap the frame */
-		pci_dma_sync_single_for_cpu(sc->pdev, bf->bf_buf_addr,
-					    sc->rx.bufsize,
-					    PCI_DMA_FROMDEVICE);
+		/* Unmap the frame */
 		pci_unmap_single(sc->pdev, bf->bf_buf_addr,
 				 sc->rx.bufsize,
 				 PCI_DMA_FROMDEVICE);

From ca8a8560569c5eb954cb18c3a91087797ffa81a4 Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Date: Tue, 16 Dec 2008 12:37:38 +0530
Subject: [PATCH 20/45] ath9k: Move rate control alg register/unregister to
 appropriate place

This patch makes sure the rate control alg is registered/unregistered
only once for this module.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/main.c | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 550afbe8e96a..11064cae8af6 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1229,9 +1229,6 @@ static void ath_detach(struct ath_softc *sc)
 	ath_deinit_leds(sc);
 
 	ieee80211_unregister_hw(hw);
-
-	ath_rate_control_unregister();
-
 	ath_rx_cleanup(sc);
 	ath_tx_cleanup(sc);
 
@@ -1512,15 +1509,7 @@ static int ath_attach(u16 devid, struct ath_softc *sc)
 	hw->sta_data_size = sizeof(struct ath_node);
 	hw->vif_data_size = sizeof(struct ath_vap);
 
-	/* Register rate control */
 	hw->rate_control_algorithm = "ath9k_rate_control";
-	error = ath_rate_control_register();
-	if (error != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to register rate control algorithm: %d\n", error);
-		ath_rate_control_unregister();
-		goto bad;
-	}
 
 	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) {
 		setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
@@ -1553,10 +1542,6 @@ static int ath_attach(u16 devid, struct ath_softc *sc)
 #endif
 
 	error = ieee80211_register_hw(hw);
-	if (error != 0) {
-		ath_rate_control_unregister();
-		goto bad;
-	}
 
 	/* Initialize LED control */
 	ath_init_leds(sc);
@@ -1564,7 +1549,6 @@ static int ath_attach(u16 devid, struct ath_softc *sc)
 	return 0;
 detach:
 	ath_detach(sc);
-bad:
 	return error;
 }
 
@@ -2714,11 +2698,24 @@ static struct pci_driver ath_pci_driver = {
 
 static int __init init_ath_pci(void)
 {
+	int error;
+
 	printk(KERN_INFO "%s: %s\n", dev_info, ATH_PCI_VERSION);
 
+	/* Register rate control algorithm */
+	error = ath_rate_control_register();
+	if (error != 0) {
+		printk(KERN_ERR
+			"Unable to register rate control algorithm: %d\n",
+			error);
+		ath_rate_control_unregister();
+		return error;
+	}
+
 	if (pci_register_driver(&ath_pci_driver) < 0) {
 		printk(KERN_ERR
 			"ath_pci: No devices found, driver not installed.\n");
+		ath_rate_control_unregister();
 		pci_unregister_driver(&ath_pci_driver);
 		return -ENODEV;
 	}
@@ -2729,6 +2726,7 @@ module_init(init_ath_pci);
 
 static void __exit exit_ath_pci(void)
 {
+	ath_rate_control_unregister();
 	pci_unregister_driver(&ath_pci_driver);
 	printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
 }

From 73ec1cc28ebc7854a376cde53f62d487e127fbca Mon Sep 17 00:00:00 2001
From: Rami Rosen <ramirose@gmail.com>
Date: Tue, 16 Dec 2008 09:37:07 +0200
Subject: [PATCH 21/45] iwlwifi: remove a parameter (dest) from
 *_fill_beacon_frame() methods.

This patch removes a parameter (dest) from iwl_fill_beacon_frame() (iwl-agn.c)
 and from iwl3945_fill_beacon_frame(). (iwl-3945.c,iwl-3945.h)

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-3945.c     | 1 -
 drivers/net/wireless/iwlwifi/iwl-3945.h     | 3 +--
 drivers/net/wireless/iwlwifi/iwl-agn.c      | 3 +--
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +-
 4 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index d0c9bdcf393a..8fdb34222c0a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2482,7 +2482,6 @@ unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv,
 
 	frame_size = iwl3945_fill_beacon_frame(priv,
 				tx_beacon_cmd->frame,
-				iwl3945_broadcast_addr,
 				sizeof(frame->u) - sizeof(*tx_beacon_cmd));
 
 	BUG_ON(frame_size > MAX_MPDU_SIZE);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index ec6084c8fd13..ffe5a8dd4210 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -590,8 +590,7 @@ extern int iwl3945_send_cmd_pdu(struct iwl3945_priv *priv, u8 id, u16 len,
 extern int __must_check iwl3945_send_cmd(struct iwl3945_priv *priv,
 		struct iwl3945_host_cmd *cmd);
 extern unsigned int iwl3945_fill_beacon_frame(struct iwl3945_priv *priv,
-					struct ieee80211_hdr *hdr,
-					const u8 *dest, int left);
+					struct ieee80211_hdr *hdr,int left);
 extern int iwl3945_rx_queue_update_write_ptr(struct iwl3945_priv *priv,
 					 struct iwl3945_rx_queue *q);
 extern int iwl3945_send_statistics_request(struct iwl3945_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index bbc1c8052ffa..ac8f83b1da7f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -371,7 +371,7 @@ static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
 
 static unsigned int iwl_fill_beacon_frame(struct iwl_priv *priv,
 					  struct ieee80211_hdr *hdr,
-					  const u8 *dest, int left)
+					  int left)
 {
 	if (!iwl_is_associated(priv) || !priv->ibss_beacon ||
 	    ((priv->iw_mode != NL80211_IFTYPE_ADHOC) &&
@@ -424,7 +424,6 @@ static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
 	tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 
 	frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
-				iwl_bcast_addr,
 				sizeof(frame->u) - sizeof(*tx_beacon_cmd));
 
 	BUG_ON(frame_size > MAX_MPDU_SIZE);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 352ccac7187b..d9c6bafff27c 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1402,7 +1402,7 @@ static void iwl3945_free_frame(struct iwl3945_priv *priv, struct iwl3945_frame *
 
 unsigned int iwl3945_fill_beacon_frame(struct iwl3945_priv *priv,
 				struct ieee80211_hdr *hdr,
-				const u8 *dest, int left)
+				int left)
 {
 
 	if (!iwl3945_is_associated(priv) || !priv->ibss_beacon ||

From 135541215ca87ff00c269e65bcaef0bdcb99aab9 Mon Sep 17 00:00:00 2001
From: Rami Rosen <ramirose@gmail.com>
Date: Tue, 16 Dec 2008 22:38:29 +0200
Subject: [PATCH 22/45] mac80211: fix a typo in ieee80211_send_assoc() method.

This patch fixes a typo in ieee80211_send_assoc(), net/mac80211/mlme.c.

The error is usage of a wrong member when building
the ie80211 management frame (it should be assoc_req, and not reassoc_req).

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mlme.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index a444b38f4901..1374b8c750ab 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -309,7 +309,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 		mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 						  IEEE80211_STYPE_ASSOC_REQ);
 		mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
-		mgmt->u.reassoc_req.listen_interval =
+		mgmt->u.assoc_req.listen_interval =
 				cpu_to_le16(local->hw.conf.listen_interval);
 	}
 

From 34c22cf93d1446791c966c878cc691e07c39d8d3 Mon Sep 17 00:00:00 2001
From: "Winkler, Tomas" <tomas.winkler@intel.com>
Date: Wed, 17 Dec 2008 16:52:27 +0800
Subject: [PATCH 23/45] iwlwifi: cleanup iwl-dev.h

The patch removes unused definition and moves code to proper places.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-3945.h     |  6 -----
 drivers/net/wireless/iwlwifi/iwl-calib.c    |  9 +++++++
 drivers/net/wireless/iwlwifi/iwl-commands.h |  2 ++
 drivers/net/wireless/iwlwifi/iwl-dev.h      | 29 +++------------------
 4 files changed, 14 insertions(+), 32 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index ffe5a8dd4210..2c0ddc5110c6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -405,12 +405,6 @@ struct iwl3945_rx_queue {
 
 #define SCAN_INTERVAL 100
 
-#define MAX_A_CHANNELS  252
-#define MIN_A_CHANNELS  7
-
-#define MAX_B_CHANNELS  14
-#define MIN_B_CHANNELS  1
-
 #define STATUS_HCMD_ACTIVE	0	/* host command in progress */
 #define STATUS_HCMD_SYNC_ACTIVE	1	/* sync host command in progress */
 #define STATUS_INT_ENABLED	2
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index 7956e0873614..f836ecc55758 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -70,6 +70,15 @@
  * INIT calibrations framework
  *****************************************************************************/
 
+struct statistics_general_data {
+	u32 beacon_silence_rssi_a;
+	u32 beacon_silence_rssi_b;
+	u32 beacon_silence_rssi_c;
+	u32 beacon_energy_a;
+	u32 beacon_energy_b;
+	u32 beacon_energy_c;
+};
+
 int iwl_send_calib_results(struct iwl_priv *priv)
 {
 	int ret = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 60e79d9bd725..52966ffbef6e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2418,6 +2418,8 @@ struct statistics_rx_ht_phy {
 	__le32 reserved2;
 } __attribute__ ((packed));
 
+#define INTERFERENCE_DATA_AVAILABLE      __constant_cpu_to_le32(1)
+
 struct statistics_rx_non_phy {
 	__le32 bogus_cts;	/* CTS received when not expecting CTS */
 	__le32 bogus_ack;	/* ACK received when not expecting ACK */
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index eaf0c9cc33a5..0468fcc1ea98 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -323,14 +323,6 @@ struct iwl_rx_queue {
 
 #define IWL_SUPPORTED_RATES_IE_LEN         8
 
-#define SCAN_INTERVAL 100
-
-#define MAX_A_CHANNELS  252
-#define MIN_A_CHANNELS  7
-
-#define MAX_B_CHANNELS  14
-#define MIN_B_CHANNELS  1
-
 #define MAX_TID_COUNT        9
 
 #define IWL_INVALID_RATE     0xFF
@@ -496,8 +488,6 @@ struct iwl_sensitivity_ranges {
 };
 
 
-#define IWL_FAT_CHANNEL_52 BIT(IEEE80211_BAND_5GHZ)
-
 #define KELVIN_TO_CELSIUS(x) ((x)-273)
 #define CELSIUS_TO_KELVIN(x) ((x)+273)
 
@@ -546,9 +536,6 @@ struct iwl_hw_params {
 	const struct iwl_sensitivity_ranges *sens;
 };
 
-#define HT_SHORT_GI_20MHZ	(1 << 0)
-#define HT_SHORT_GI_40MHZ	(1 << 1)
-
 
 /******************************************************************************
  *
@@ -590,15 +577,15 @@ static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
 }
 
 
-struct iwl_priv;
-
-
 struct iwl_dma_ptr {
 	dma_addr_t dma;
 	void *addr;
 	size_t size;
 };
 
+#define HT_SHORT_GI_20MHZ	(1 << 0)
+#define HT_SHORT_GI_40MHZ	(1 << 1)
+
 #define IWL_CHANNEL_WIDTH_20MHZ   0
 #define IWL_CHANNEL_WIDTH_40MHZ   1
 
@@ -613,7 +600,6 @@ struct iwl_dma_ptr {
 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
 
 /* Sensitivity and chain noise calibration */
-#define INTERFERENCE_DATA_AVAILABLE	__constant_cpu_to_le32(1)
 #define INITIALIZATION_VALUE		0xFFFF
 #define CAL_NUM_OF_BEACONS		20
 #define MAXIMUM_ALLOWED_PATHLOSS	15
@@ -666,15 +652,6 @@ enum iwl4965_calib_enabled_state {
 	IWL_CALIB_ENABLED = 1,
 };
 
-struct statistics_general_data {
-	u32 beacon_silence_rssi_a;
-	u32 beacon_silence_rssi_b;
-	u32 beacon_silence_rssi_c;
-	u32 beacon_energy_a;
-	u32 beacon_energy_b;
-	u32 beacon_energy_c;
-};
-
 
 /*
  * enum iwl_calib

From 5c11ec60ef2eb8fb409b2c0a427e5a8ab6ee05f8 Mon Sep 17 00:00:00 2001
From: "Wu, Fengguang" <fengguang.wu@intel.com>
Date: Wed, 17 Dec 2008 16:52:28 +0800
Subject: [PATCH 24/45] iwlwifi: add line feed to printk

This adds line feed to printk.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-led.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index dce32ff8dec1..11eccd7d268c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -292,7 +292,7 @@ static int iwl_get_blink_rate(struct iwl_priv *priv)
 			if (tpt  > (blink_tbl[i].tpt * IWL_1MB_RATE))
 				break;
 
-	IWL_DEBUG_LED("LED BLINK IDX=%d", i);
+	IWL_DEBUG_LED("LED BLINK IDX=%d\n", i);
 	return i;
 }
 

From c3a739fa3507d1d5b3d2cb6cc491edeef8fa54c0 Mon Sep 17 00:00:00 2001
From: "Wu, Fengguang" <fengguang.wu@intel.com>
Date: Wed, 17 Dec 2008 16:52:29 +0800
Subject: [PATCH 25/45] iwlwifi: update comments on the debug interface

Bring up-to-date some comments on the location of debug files.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c   |  2 +-
 drivers/net/wireless/iwlwifi/iwl-debug.h | 17 +++++++----------
 2 files changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index ac8f83b1da7f..a0051928d298 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3342,7 +3342,7 @@ static int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 
 /*
  * The following adds a new attribute to the sysfs representation
- * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
+ * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
  * used for controlling the debug level.
  *
  * See the level definitions in iwl for details.
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index e4c264b4f7b0..56c13b458de7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -96,28 +96,25 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
 #endif				/* CONFIG_IWLWIFI_DEBUGFS */
 
 /*
- * To use the debug system;
+ * To use the debug system:
  *
  * If you are defining a new debug classification, simply add it to the #define
- * list here in the form of:
+ * list here in the form of
  *
  * #define IWL_DL_xxxx VALUE
  *
- * shifting value to the left one bit from the previous entry.  xxxx should be
- * the name of the classification (for example, WEP)
+ * where xxxx should be the name of the classification (for example, WEP).
  *
  * You then need to either add a IWL_xxxx_DEBUG() macro definition for your
  * classification, or use IWL_DEBUG(IWL_DL_xxxx, ...) whenever you want
  * to send output to that classification.
  *
- * To add your debug level to the list of levels seen when you perform
+ * The active debug levels can be accessed via files
  *
- * % cat /sys/class/net/wlanX/device/debug_level
+ * 	/sys/module/iwlagn/parameters/debug{50}
+ * 	/sys/class/net/wlan0/device/debug_level
  *
- * you simply need to add your entry to the iwl_debug_levels array.
- *
- * If you do not see debug_level in  /sys/class/net/wlanX/device/debug_level
- * then you do not have CONFIG_IWLWIFI_DEBUG defined in your kernel config file
+ * when CONFIG_IWLWIFI_DEBUG=y.
  */
 
 #define IWL_DL_INFO		(1 << 0)

From 95aa194ac4a8fee0aea64c9609e70211cd057ad2 Mon Sep 17 00:00:00 2001
From: "Wu, Fengguang" <fengguang.wu@intel.com>
Date: Wed, 17 Dec 2008 16:52:30 +0800
Subject: [PATCH 26/45] iwlwifi: use type uint for module param debug

This enables one to change the debug level at bit 31.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-4965.c     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-5000.c     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-core.h     | 2 +-
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index a7e6e32bd489..3a78d860631d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2354,7 +2354,7 @@ module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
 module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
-module_param_named(debug, iwl4965_mod_params.debug, int, 0444);
+module_param_named(debug, iwl4965_mod_params.debug, uint, 0444);
 MODULE_PARM_DESC(debug, "debug output mask");
 module_param_named(
 	disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, 0444);
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 2344de945974..7f3a921a15c6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1623,7 +1623,7 @@ MODULE_PARM_DESC(disable50,
 module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444);
 MODULE_PARM_DESC(swcrypto50,
 		  "using software crypto engine (default 0 [hardware])\n");
-module_param_named(debug50, iwl50_mod_params.debug, int, 0444);
+module_param_named(debug50, iwl50_mod_params.debug, uint, 0444);
 MODULE_PARM_DESC(debug50, "50XX debug output mask");
 module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, 0444);
 MODULE_PARM_DESC(queues_num50, "number of hw queues in 50xx series");
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 08b842f85768..7c3a20a986bb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -154,7 +154,7 @@ struct iwl_ops {
 struct iwl_mod_params {
 	int disable;		/* def: 0 = enable radio */
 	int sw_crypto;		/* def: 0 = using hardware encryption */
-	int debug;		/* def: 0 = minimal debug log messages */
+	u32 debug;		/* def: 0 = minimal debug log messages */
 	int disable_hw_scan;	/* def: 0 = use h/w scan */
 	int num_of_queues;	/* def: HW dependent */
 	int num_of_ampdu_queues;/* def: HW dependent */
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index d9c6bafff27c..d64580805d6e 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -65,7 +65,7 @@ static int iwl3945_tx_queue_update_write_ptr(struct iwl3945_priv *priv,
 
 /* module parameters */
 static int iwl3945_param_disable_hw_scan; /* def: 0 = use 3945's h/w scan */
-static int iwl3945_param_debug;    /* def: 0 = minimal debug log messages */
+static u32 iwl3945_param_debug;    /* def: 0 = minimal debug log messages */
 static int iwl3945_param_disable;  /* def: 0 = enable radio */
 static int iwl3945_param_antenna;  /* def: 0 = both antennas (use diversity) */
 int iwl3945_param_hwcrypto;        /* def: 0 = use software encryption */
@@ -8343,7 +8343,7 @@ MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
 module_param_named(hwcrypto, iwl3945_param_hwcrypto, int, 0444);
 MODULE_PARM_DESC(hwcrypto,
 		 "using hardware crypto engine (default 0 [software])\n");
-module_param_named(debug, iwl3945_param_debug, int, 0444);
+module_param_named(debug, iwl3945_param_debug, uint, 0444);
 MODULE_PARM_DESC(debug, "debug output mask");
 module_param_named(disable_hw_scan, iwl3945_param_disable_hw_scan, int, 0444);
 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");

From febf3370c63b4ea7fc1cedb9a73ac37e3cb21079 Mon Sep 17 00:00:00 2001
From: Wu Fengguang <fengguang.wu@intel.com>
Date: Wed, 17 Dec 2008 16:52:31 +0800
Subject: [PATCH 27/45] iwlwifi: remove useless goto

The patch removes some useless goto in code cleanup.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-4965.c | 8 ++------
 drivers/net/wireless/iwlwifi/iwl-5000.c | 8 ++------
 2 files changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 3a78d860631d..5a72bc0377de 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -426,7 +426,6 @@ static void iwl4965_nic_config(struct iwl_priv *priv)
 
 static int iwl4965_apm_stop_master(struct iwl_priv *priv)
 {
-	int ret = 0;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -434,16 +433,13 @@ static int iwl4965_apm_stop_master(struct iwl_priv *priv)
 	/* set stop master bit */
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
 
-	ret = iwl_poll_direct_bit(priv, CSR_RESET,
+	iwl_poll_direct_bit(priv, CSR_RESET,
 			CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
-	if (ret < 0)
-		goto out;
 
-out:
 	spin_unlock_irqrestore(&priv->lock, flags);
 	IWL_DEBUG_INFO("stop master\n");
 
-	return ret;
+	return 0;
 }
 
 static void iwl4965_apm_stop(struct iwl_priv *priv)
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 7f3a921a15c6..66d053d28a74 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -73,7 +73,6 @@ static const u16 iwl5000_default_queue_to_tx_fifo[] = {
 /* FIXME: same implementation as 4965 */
 static int iwl5000_apm_stop_master(struct iwl_priv *priv)
 {
-	int ret = 0;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -81,16 +80,13 @@ static int iwl5000_apm_stop_master(struct iwl_priv *priv)
 	/* set stop master bit */
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
 
-	ret = iwl_poll_direct_bit(priv, CSR_RESET,
+	iwl_poll_direct_bit(priv, CSR_RESET,
 				  CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
-	if (ret < 0)
-		goto out;
 
-out:
 	spin_unlock_irqrestore(&priv->lock, flags);
 	IWL_DEBUG_INFO("stop master\n");
 
-	return ret;
+	return 0;
 }
 
 

From 4087f6f68cdbd2845c7e54236bae1b058a7b827b Mon Sep 17 00:00:00 2001
From: "Wu, Fengguang" <fengguang.wu@intel.com>
Date: Wed, 17 Dec 2008 16:52:32 +0800
Subject: [PATCH 28/45] iwlwifi: use meaningful vars in _iwl_poll_bit()

Rename vars in _iwl_poll_bit() to better reflect the truth.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-io.h | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h
index 998ac1971696..0a92e7431ada 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.h
+++ b/drivers/net/wireless/iwlwifi/iwl-io.h
@@ -87,17 +87,18 @@ static inline u32 __iwl_read32(char *f, u32 l, struct iwl_priv *priv, u32 ofs)
 #define iwl_read32(p, o) _iwl_read32(p, o)
 #endif
 
+#define IWL_POLL_INTERVAL 10	/* microseconds */
 static inline int _iwl_poll_bit(struct iwl_priv *priv, u32 addr,
 				u32 bits, u32 mask, int timeout)
 {
-	int i = 0;
+	int t = 0;
 
 	do {
 		if ((_iwl_read32(priv, addr) & mask) == (bits & mask))
-			return i;
-		udelay(10);
-		i += 10;
-	} while (i < timeout);
+			return t;
+		udelay(IWL_POLL_INTERVAL);
+		t += IWL_POLL_INTERVAL;
+	} while (t < timeout);
 
 	return -ETIMEDOUT;
 }

From f1bc4ac61f2c08515afd80c6dc3962aa6d0b138b Mon Sep 17 00:00:00 2001
From: Zhu Yi <yi.zhu@intel.com>
Date: Wed, 17 Dec 2008 16:52:33 +0800
Subject: [PATCH 29/45] iwlwifi: use GFP_KERNEL to allocate Rx SKB memory

Previously we allocate Rx SKB with GFP_ATOMIC flag. This is because we need
to hold a spinlock to protect the two rx_used and rx_free lists operation
in the rxq.

	spin_lock();
	...
	element = rxq->rx_used.next;
	element->skb = alloc_skb(..., GFP_ATOMIC);
	list_del(element);
	list_add_tail(&element->list, &rxq->rx_free);
	...
	spin_unlock();

After spliting the rx_used delete and rx_free insert into two operations,
we don't require the skb allocation in an atomic context any more (the
function itself is scheduled in a workqueue).

	spin_lock();
	...
	element = rxq->rx_used.next;
	list_del(element);
	...
	spin_unlock();
	...
	element->skb = alloc_skb(..., GFP_KERNEL);
	...
	spin_lock()
	...
	list_add_tail(&element->list, &rxq->rx_free);
	...
	spin_unlock();

This patch should fix the "iwlagn: Can not allocate SKB buffers" warning
we see recently.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 12 +----------
 drivers/net/wireless/iwlwifi/iwl-rx.c  | 29 +++++++++++++++++---------
 2 files changed, 20 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index a0051928d298..ff8635f0ed45 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1110,16 +1110,6 @@ static void iwl_setup_rx_handlers(struct iwl_priv *priv)
 	priv->cfg->ops->lib->rx_handler_setup(priv);
 }
 
-/*
- * this should be called while priv->lock is locked
-*/
-static void __iwl_rx_replenish(struct iwl_priv *priv)
-{
-	iwl_rx_allocate(priv);
-	iwl_rx_queue_restock(priv);
-}
-
-
 /**
  * iwl_rx_handle - Main entry function for receiving responses from uCode
  *
@@ -1228,7 +1218,7 @@ void iwl_rx_handle(struct iwl_priv *priv)
 			count++;
 			if (count >= 8) {
 				priv->rxq.read = i;
-				__iwl_rx_replenish(priv);
+				iwl_rx_queue_restock(priv);
 				count = 0;
 			}
 		}
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 919a775121e4..c5f1aa0feac8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -244,25 +244,31 @@ void iwl_rx_allocate(struct iwl_priv *priv)
 	struct list_head *element;
 	struct iwl_rx_mem_buffer *rxb;
 	unsigned long flags;
-	spin_lock_irqsave(&rxq->lock, flags);
-	while (!list_empty(&rxq->rx_used)) {
+
+	while (1) {
+		spin_lock_irqsave(&rxq->lock, flags);
+
+		if (list_empty(&rxq->rx_used)) {
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			return;
+		}
 		element = rxq->rx_used.next;
 		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+		list_del(element);
+
+		spin_unlock_irqrestore(&rxq->lock, flags);
 
 		/* Alloc a new receive buffer */
 		rxb->skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
-				__GFP_NOWARN | GFP_ATOMIC);
+				     GFP_KERNEL);
 		if (!rxb->skb) {
-			if (net_ratelimit())
-				printk(KERN_CRIT DRV_NAME
-				       ": Can not allocate SKB buffers\n");
+			printk(KERN_CRIT DRV_NAME
+				   "Can not allocate SKB buffers\n");
 			/* We don't reschedule replenish work here -- we will
 			 * call the restock method and if it still needs
 			 * more buffers it will schedule replenish */
 			break;
 		}
-		priv->alloc_rxb_skb++;
-		list_del(element);
 
 		/* Get physical address of RB/SKB */
 		rxb->real_dma_addr = pci_map_single(
@@ -276,12 +282,15 @@ void iwl_rx_allocate(struct iwl_priv *priv)
 		rxb->aligned_dma_addr = ALIGN(rxb->real_dma_addr, 256);
 		skb_reserve(rxb->skb, rxb->aligned_dma_addr - rxb->real_dma_addr);
 
+		spin_lock_irqsave(&rxq->lock, flags);
+
 		list_add_tail(&rxb->list, &rxq->rx_free);
 		rxq->free_count++;
+		priv->alloc_rxb_skb++;
+
+		spin_unlock_irqrestore(&rxq->lock, flags);
 	}
-	spin_unlock_irqrestore(&rxq->lock, flags);
 }
-EXPORT_SYMBOL(iwl_rx_allocate);
 
 void iwl_rx_replenish(struct iwl_priv *priv)
 {

From 91f39e8eea725347b6a82d1e35e512ec8b298b0b Mon Sep 17 00:00:00 2001
From: Jay Sternberg <jay.e.sternberg@linux.intel.com>
Date: Wed, 17 Dec 2008 16:52:34 +0800
Subject: [PATCH 30/45] iwlwifi: indicate txpower is off in sysfs

The patch checks if the radio is disabled before displaying the tx power
level. Previously when the txpower was set off show_tx_power still
returned the prior power level. Now it will indicate the power has been
turned off.

Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index ff8635f0ed45..5da6b35cd26d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3418,7 +3418,11 @@ static ssize_t show_tx_power(struct device *d,
 			     struct device_attribute *attr, char *buf)
 {
 	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-	return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
+
+	if (!iwl_is_ready_rf(priv))
+		return sprintf(buf, "off\n");
+	else
+		return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
 }
 
 static ssize_t store_tx_power(struct device *d,

From f66000f7a39769b0ce2355fca13c40ac2f1c39db Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Wed, 17 Dec 2008 13:30:31 +0200
Subject: [PATCH 31/45] ath9k: Fix a NULL pointer dereference in ath_rate_get

It looks like mac80211 may try to send unicast frames to a STA that
does not have a STA entry. We need to make sure that that is caught in
the rate control code before dereferencing STA data.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/rc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
index 0ae5988e0b65..04ab457a8faa 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -1498,7 +1498,8 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 	__le16 fc = hdr->frame_control;
 
 	/* lowest rate for management and multicast/broadcast frames */
-	if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) {
+	if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) ||
+	    !sta) {
 		tx_info->control.rates[0].idx = rate_lowest_index(sband, sta);
 		tx_info->control.rates[0].count =
 			is_multicast_ether_addr(hdr->addr1) ? 1 : ATH_MGT_TXMAXTRY;

From 6ace2891a1d632303283816ae050849da48df142 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Wed, 17 Dec 2008 13:32:17 +0200
Subject: [PATCH 32/45] ath9k: Key cache allocation for AP mode

Enhance allocation of key cache entries to support multiple pairwise
keys to fix AP mode with more than one associated STA.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/main.c | 200 ++++++++++++++++++++----------
 1 file changed, 132 insertions(+), 68 deletions(-)

diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 11064cae8af6..e768be4669e7 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -664,13 +664,6 @@ static u32 ath_get_extchanmode(struct ath_softc *sc,
 	return chanmode;
 }
 
-static void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot)
-{
-	ath9k_hw_keyreset(sc->sc_ah, keyix);
-	if (freeslot)
-		clear_bit(keyix, sc->sc_keymap);
-}
-
 static int ath_keyset(struct ath_softc *sc, u16 keyix,
 	       struct ath9k_keyval *hk, const u8 mac[ETH_ALEN])
 {
@@ -682,21 +675,20 @@ static int ath_keyset(struct ath_softc *sc, u16 keyix,
 	return status != false;
 }
 
-static int ath_setkey_tkip(struct ath_softc *sc,
-			   struct ieee80211_key_conf *key,
+static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key,
 			   struct ath9k_keyval *hk,
 			   const u8 *addr)
 {
-	u8 *key_rxmic = NULL;
-	u8 *key_txmic = NULL;
+	const u8 *key_rxmic;
+	const u8 *key_txmic;
 
-	key_txmic = key->key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY;
-	key_rxmic = key->key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY;
+	key_txmic = key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY;
+	key_rxmic = key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY;
 
 	if (addr == NULL) {
 		/* Group key installation */
-		memcpy(hk->kv_mic,  key_rxmic, sizeof(hk->kv_mic));
-		return ath_keyset(sc, key->keyidx, hk, addr);
+		memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
+		return ath_keyset(sc, keyix, hk, addr);
 	}
 	if (!sc->sc_splitmic) {
 		/*
@@ -705,14 +697,14 @@ static int ath_setkey_tkip(struct ath_softc *sc,
 		 */
 		memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
 		memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic));
-		return ath_keyset(sc, key->keyidx, hk, addr);
+		return ath_keyset(sc, keyix, hk, addr);
 	}
 	/*
 	 * TX key goes at first index, RX key at +32.
 	 * The hal handles the MIC keys at index+64.
 	 */
 	memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
-	if (!ath_keyset(sc, key->keyidx, hk, NULL)) {
+	if (!ath_keyset(sc, keyix, hk, NULL)) {
 		/* Txmic entry failed. No need to proceed further */
 		DPRINTF(sc, ATH_DBG_KEYCACHE,
 			"Setting TX MIC Key Failed\n");
@@ -721,18 +713,85 @@ static int ath_setkey_tkip(struct ath_softc *sc,
 
 	memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
 	/* XXX delete tx key on failure? */
-	return ath_keyset(sc, key->keyidx+32, hk, addr);
+	return ath_keyset(sc, keyix + 32, hk, addr);
+}
+
+static int ath_reserve_key_cache_slot_tkip(struct ath_softc *sc)
+{
+	int i;
+
+	for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax / 2; i++) {
+		if (test_bit(i, sc->sc_keymap) ||
+		    test_bit(i + 64, sc->sc_keymap))
+			continue; /* At least one part of TKIP key allocated */
+		if (sc->sc_splitmic &&
+		    (test_bit(i + 32, sc->sc_keymap) ||
+		     test_bit(i + 64 + 32, sc->sc_keymap)))
+			continue; /* At least one part of TKIP key allocated */
+
+		/* Found a free slot for a TKIP key */
+		return i;
+	}
+	return -1;
+}
+
+static int ath_reserve_key_cache_slot(struct ath_softc *sc)
+{
+	int i;
+
+	/* First, try to find slots that would not be available for TKIP. */
+	if (sc->sc_splitmic) {
+		for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax / 4; i++) {
+			if (!test_bit(i, sc->sc_keymap) &&
+			    (test_bit(i + 32, sc->sc_keymap) ||
+			     test_bit(i + 64, sc->sc_keymap) ||
+			     test_bit(i + 64 + 32, sc->sc_keymap)))
+				return i;
+			if (!test_bit(i + 32, sc->sc_keymap) &&
+			    (test_bit(i, sc->sc_keymap) ||
+			     test_bit(i + 64, sc->sc_keymap) ||
+			     test_bit(i + 64 + 32, sc->sc_keymap)))
+				return i + 32;
+			if (!test_bit(i + 64, sc->sc_keymap) &&
+			    (test_bit(i , sc->sc_keymap) ||
+			     test_bit(i + 32, sc->sc_keymap) ||
+			     test_bit(i + 64 + 32, sc->sc_keymap)))
+				return i;
+			if (!test_bit(i + 64 + 32, sc->sc_keymap) &&
+			    (test_bit(i, sc->sc_keymap) ||
+			     test_bit(i + 32, sc->sc_keymap) ||
+			     test_bit(i + 64, sc->sc_keymap)))
+				return i;
+		}
+	} else {
+		for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax / 2; i++) {
+			if (!test_bit(i, sc->sc_keymap) &&
+			    test_bit(i + 64, sc->sc_keymap))
+				return i;
+			if (test_bit(i, sc->sc_keymap) &&
+			    !test_bit(i + 64, sc->sc_keymap))
+				return i + 64;
+		}
+	}
+
+	/* No partially used TKIP slots, pick any available slot */
+	for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax; i++) {
+		if (!test_bit(i, sc->sc_keymap))
+			return i; /* Found a free slot for a key */
+	}
+
+	/* No free slot found */
+	return -1;
 }
 
 static int ath_key_config(struct ath_softc *sc,
 			  const u8 *addr,
 			  struct ieee80211_key_conf *key)
 {
-	struct ieee80211_vif *vif;
 	struct ath9k_keyval hk;
 	const u8 *mac = NULL;
 	int ret = 0;
-	enum nl80211_iftype opmode;
+	int idx;
 
 	memset(&hk, 0, sizeof(hk));
 
@@ -750,65 +809,69 @@ static int ath_key_config(struct ath_softc *sc,
 		return -EINVAL;
 	}
 
-	hk.kv_len  = key->keylen;
+	hk.kv_len = key->keylen;
 	memcpy(hk.kv_val, key->key, key->keylen);
 
-	if (!sc->sc_vaps[0])
-		return -EIO;
+	if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
+		/* For now, use the default keys for broadcast keys. This may
+		 * need to change with virtual interfaces. */
+		idx = key->keyidx;
+	} else if (key->keyidx) {
+		struct ieee80211_vif *vif;
 
-	vif = sc->sc_vaps[0];
-	opmode = vif->type;
-
-	/*
-	 *  Strategy:
-	 *   For STA mc tx, we will not setup a key at
-	 *   all since we never tx mc.
-	 *
-	 *   For STA mc rx, we will use the keyID.
-	 *
-	 *   For ADHOC mc tx, we will use the keyID, and no macaddr.
-	 *
-	 *   For ADHOC mc rx, we will alloc a slot and plumb the mac of
-	 *   the peer node.
-	 *   BUT we will plumb a cleartext key so that we can do
-	 *   per-Sta default key table lookup in software.
-	 */
-	if (is_broadcast_ether_addr(addr)) {
-		switch (opmode) {
-		case NL80211_IFTYPE_STATION:
-			/* default key:  could be group WPA key
-			 * or could be static WEP key */
-			mac = NULL;
-			break;
-		case NL80211_IFTYPE_ADHOC:
-			break;
-		case NL80211_IFTYPE_AP:
-			break;
-		default:
-			ASSERT(0);
-			break;
-		}
+		mac = addr;
+		vif = sc->sc_vaps[0];
+		if (vif->type != NL80211_IFTYPE_AP) {
+			/* Only keyidx 0 should be used with unicast key, but
+			 * allow this for client mode for now. */
+			idx = key->keyidx;
+		} else
+			return -EIO;
 	} else {
 		mac = addr;
+		if (key->alg == ALG_TKIP)
+			idx = ath_reserve_key_cache_slot_tkip(sc);
+		else
+			idx = ath_reserve_key_cache_slot(sc);
+		if (idx < 0)
+			return -EIO; /* no free key cache entries */
 	}
 
 	if (key->alg == ALG_TKIP)
-		ret = ath_setkey_tkip(sc, key, &hk, mac);
+		ret = ath_setkey_tkip(sc, idx, key->key, &hk, mac);
 	else
-		ret = ath_keyset(sc, key->keyidx, &hk, mac);
+		ret = ath_keyset(sc, idx, &hk, mac);
 
 	if (!ret)
 		return -EIO;
 
-	return 0;
+	set_bit(idx, sc->sc_keymap);
+	if (key->alg == ALG_TKIP) {
+		set_bit(idx + 64, sc->sc_keymap);
+		if (sc->sc_splitmic) {
+			set_bit(idx + 32, sc->sc_keymap);
+			set_bit(idx + 64 + 32, sc->sc_keymap);
+		}
+	}
+
+	return idx;
 }
 
 static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key)
 {
-	int freeslot;
+	ath9k_hw_keyreset(sc->sc_ah, key->hw_key_idx);
+	if (key->hw_key_idx < IEEE80211_WEP_NKID)
+		return;
 
-	freeslot = (key->keyidx >= 4) ? 1 : 0;
-	ath_key_reset(sc, key->keyidx, freeslot);
+	clear_bit(key->hw_key_idx, sc->sc_keymap);
+	if (key->alg != ALG_TKIP)
+		return;
+
+	clear_bit(key->hw_key_idx + 64, sc->sc_keymap);
+	if (sc->sc_splitmic) {
+		clear_bit(key->hw_key_idx + 32, sc->sc_keymap);
+		clear_bit(key->hw_key_idx + 64 + 32, sc->sc_keymap);
+	}
 }
 
 static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info)
@@ -1301,13 +1364,15 @@ static int ath_init(u16 devid, struct ath_softc *sc)
 	 * Mark key cache slots associated with global keys
 	 * as in use.  If we knew TKIP was not to be used we
 	 * could leave the +32, +64, and +32+64 slots free.
-	 * XXX only for splitmic.
 	 */
 	for (i = 0; i < IEEE80211_WEP_NKID; i++) {
 		set_bit(i, sc->sc_keymap);
-		set_bit(i + 32, sc->sc_keymap);
 		set_bit(i + 64, sc->sc_keymap);
-		set_bit(i + 32 + 64, sc->sc_keymap);
+		if (ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
+					   0, NULL)) {
+			set_bit(i + 32, sc->sc_keymap);
+			set_bit(i + 32 + 64, sc->sc_keymap);
+		}
 	}
 
 	/* Collect the channel list using the default country code */
@@ -2292,18 +2357,17 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
 	switch (cmd) {
 	case SET_KEY:
 		ret = ath_key_config(sc, addr, key);
-		if (!ret) {
-			set_bit(key->keyidx, sc->sc_keymap);
-			key->hw_key_idx = key->keyidx;
+		if (ret >= 0) {
+			key->hw_key_idx = ret;
 			/* push IV and Michael MIC generation to stack */
 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 			if (key->alg == ALG_TKIP)
 				key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+			ret = 0;
 		}
 		break;
 	case DISABLE_KEY:
 		ath_key_delete(sc, key);
-		clear_bit(key->keyidx, sc->sc_keymap);
 		break;
 	default:
 		ret = -EINVAL;

From 6110781af080c007b2202187a8518920e03d5748 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Wed, 17 Dec 2008 12:04:43 +0100
Subject: [PATCH 33/45] p54usb: bring first generation devices back to life

This patch fixes a serious regression (introduced by:
"p54: fix memory management")
that affected isl3886+net2280 usb devices operation.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Tested-by: Artur Skawina <art.08.09@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54usb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 17f89c7eb098..c44a200059d2 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -301,6 +301,8 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct net2280_tx_hdr *hdr;
 	struct net2280_reg_write *reg;
 	int err = 0;
+	__le32 addr = ((struct p54_hdr *) skb->data)->req_id;
+	__le16 len = cpu_to_le16(skb->len);
 
 	reg = kmalloc(sizeof(*reg), GFP_ATOMIC);
 	if (!reg)
@@ -325,8 +327,8 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
 
 	hdr = (void *)skb_push(skb, sizeof(*hdr));
 	memset(hdr, 0, sizeof(*hdr));
-	hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id;
-	hdr->len = cpu_to_le16(skb->len + sizeof(struct p54_hdr));
+	hdr->len = len;
+	hdr->device_addr = addr;
 
 	usb_fill_bulk_urb(int_urb, priv->udev,
 		usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg),

From 5e3f308997f53d00e8cbebdb89d4f6e347aa963a Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Wed, 17 Dec 2008 14:26:59 -0600
Subject: [PATCH 34/45] mac80211: Print unknown packet type in tasklet_handler

In stress testing p54usb, the WARN_ON() in ieee80211_tasklet_handler() was
triggered; however, there is no logging of the received value for packet
type. Adding that feature will improve the warning.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index a0371caf01ce..ab6b73647b3e 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -341,7 +341,8 @@ static void ieee80211_tasklet_handler(unsigned long data)
 			dev_kfree_skb(skb);
 			break ;
 		default:
-			WARN_ON(1);
+			WARN(1, "mac80211: Packet is of unknown type %d\n",
+			     skb->pkt_type);
 			dev_kfree_skb(skb);
 			break;
 		}

From aa33de09a849bd65b1201e1aec42e3e412c14cf6 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Thu, 18 Dec 2008 11:40:16 +0530
Subject: [PATCH 35/45] ath9k: Protect config() callback with a mutex

This should fix the timeout issues seen when using wpa_supplicant.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/core.h | 1 +
 drivers/net/wireless/ath9k/main.c | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index e38f0331cfd5..4ca2aed236e0 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -701,6 +701,7 @@ struct ath_softc {
 	struct ath_hal *sc_ah;
 	void __iomem *mem;
 	spinlock_t sc_resetlock;
+	struct mutex mutex;
 
 	u8 sc_curbssid[ETH_ALEN];
 	u8 sc_myaddr[ETH_ALEN];
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index e768be4669e7..94c526669a4d 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1324,6 +1324,7 @@ static int ath_init(u16 devid, struct ath_softc *sc)
 		printk(KERN_ERR "Unable to create debugfs files\n");
 
 	spin_lock_init(&sc->sc_resetlock);
+	mutex_init(&sc->mutex);
 	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
 	tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
 		     (unsigned long)sc);
@@ -2133,6 +2134,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 	struct ath_softc *sc = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
 
+	mutex_lock(&sc->mutex);
 	if (changed & (IEEE80211_CONF_CHANGE_CHANNEL |
 		       IEEE80211_CONF_CHANGE_HT)) {
 		struct ieee80211_channel *curchan = hw->conf.channel;
@@ -2145,6 +2147,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 		if (pos == -1) {
 			DPRINTF(sc, ATH_DBG_FATAL, "Invalid channel: %d\n",
 				curchan->center_freq);
+			mutex_unlock(&sc->mutex);
 			return -EINVAL;
 		}
 
@@ -2165,6 +2168,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 
 		if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) {
 			DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
+			mutex_unlock(&sc->mutex);
 			return -EINVAL;
 		}
 
@@ -2174,6 +2178,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 	if (changed & IEEE80211_CONF_CHANGE_POWER)
 		sc->sc_config.txpowlimit = 2 * conf->power_level;
 
+	mutex_unlock(&sc->mutex);
 	return 0;
 }
 

From ea6121328885640c137b0a8830f67ca6c386a24a Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Thu, 18 Dec 2008 14:31:10 +0200
Subject: [PATCH 36/45] ath9k: Fix key cache slot selection for splitmic

ath_reserve_key_cache_slot() was obviously supposed to return an index
to a free slot, not reserved one. This could have caused problems with
hardware revisions that use splitmic.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 94c526669a4d..b44736782abd 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -756,12 +756,12 @@ static int ath_reserve_key_cache_slot(struct ath_softc *sc)
 			    (test_bit(i , sc->sc_keymap) ||
 			     test_bit(i + 32, sc->sc_keymap) ||
 			     test_bit(i + 64 + 32, sc->sc_keymap)))
-				return i;
+				return i + 64;
 			if (!test_bit(i + 64 + 32, sc->sc_keymap) &&
 			    (test_bit(i, sc->sc_keymap) ||
 			     test_bit(i + 32, sc->sc_keymap) ||
 			     test_bit(i + 64, sc->sc_keymap)))
-				return i;
+				return i + 64 + 32;
 		}
 	} else {
 		for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax / 2; i++) {

From be2864cfff2fe4b599b46f03cce1e7689e05c60c Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Thu, 18 Dec 2008 14:33:00 +0200
Subject: [PATCH 37/45] ath9k: Fixed RX decryption status reporting

The RX code in ath9k uses sc_keymap to figure out whether a default
key was used. However, the default key entries in sc_keymap were
always set and as such, frames could have been claimed to be decrypted
by hardware when they were not. This can cause problems especially
with TKIP since mac80211 is validating the Michael MIC in the frame
and this will result in MIC failure and potentially TKIP
countermeasures if the frame was not decrypted correctly.

Change key cache slot allocation to mark only the keys that really
have been used in sc_keymap to avoid the issue. The key cache slot
selection routines are now internally avoiding the slots that may be
needed for TKIP group keys.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/main.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index b44736782abd..191eec50dc75 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -776,6 +776,18 @@ static int ath_reserve_key_cache_slot(struct ath_softc *sc)
 
 	/* No partially used TKIP slots, pick any available slot */
 	for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax; i++) {
+		/* Do not allow slots that could be needed for TKIP group keys
+		 * to be used. This limitation could be removed if we know that
+		 * TKIP will not be used. */
+		if (i >= 64 && i < 64 + IEEE80211_WEP_NKID)
+			continue;
+		if (sc->sc_splitmic) {
+			if (i >= 32 && i < 32 + IEEE80211_WEP_NKID)
+				continue;
+			if (i >= 64 + 32 && i < 64 + 32 + IEEE80211_WEP_NKID)
+				continue;
+		}
+
 		if (!test_bit(i, sc->sc_keymap))
 			return i; /* Found a free slot for a key */
 	}
@@ -1361,20 +1373,6 @@ static int ath_init(u16 devid, struct ath_softc *sc)
 	 */
 	for (i = 0; i < sc->sc_keymax; i++)
 		ath9k_hw_keyreset(ah, (u16) i);
-	/*
-	 * Mark key cache slots associated with global keys
-	 * as in use.  If we knew TKIP was not to be used we
-	 * could leave the +32, +64, and +32+64 slots free.
-	 */
-	for (i = 0; i < IEEE80211_WEP_NKID; i++) {
-		set_bit(i, sc->sc_keymap);
-		set_bit(i + 64, sc->sc_keymap);
-		if (ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
-					   0, NULL)) {
-			set_bit(i + 32, sc->sc_keymap);
-			set_bit(i + 32 + 64, sc->sc_keymap);
-		}
-	}
 
 	/* Collect the channel list using the default country code */
 

From 0e7690f1e9ee1e762f27678d2ea10e4c1fde3236 Mon Sep 17 00:00:00 2001
From: Rami Rosen <ramirose@gmail.com>
Date: Thu, 18 Dec 2008 18:04:51 +0200
Subject: [PATCH 38/45] iwlwifi: iwl-tx.c cleanup (remove unused parameter and
 unused local variable).

This patch removes unused parameter and unused local variable in
methods in iwl-tx.c:

- Remove a parameter (is_unicast) from iwl_tx_cmd_build_basic().

- Remove an unused variable name unicast from iwl_tx_skb().

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-tx.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 1e7cd8d9039e..b0ee86c62685 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -645,7 +645,7 @@ static void iwl_tx_cmd_build_basic(struct iwl_priv *priv,
 				  struct iwl_tx_cmd *tx_cmd,
 				  struct ieee80211_tx_info *info,
 				  struct ieee80211_hdr *hdr,
-				  int is_unicast, u8 std_id)
+				  u8 std_id)
 {
 	__le16 fc = hdr->frame_control;
 	__le32 tx_flags = tx_cmd->tx_flags;
@@ -834,7 +834,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	u16 len, len_org;
 	u16 seq_number = 0;
 	__le16 fc;
-	u8 hdr_len, unicast;
+	u8 hdr_len;
 	u8 sta_id;
 	u8 wait_write_ptr = 0;
 	u8 tid = 0;
@@ -854,8 +854,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 		goto drop_unlock;
 	}
 
-	unicast = !is_multicast_ether_addr(hdr->addr1);
-
 	fc = hdr->frame_control;
 
 #ifdef CONFIG_IWLWIFI_DEBUG
@@ -994,7 +992,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	len = (u16)skb->len;
 	tx_cmd->len = cpu_to_le16(len);
 	/* TODO need this for burst mode later on */
-	iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, unicast, sta_id);
+	iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id);
 
 	/* set is_hcca to 0; it probably will never be implemented */
 	iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0);

From d10d0e5707fb7b8afa7e68a14d69e752604ee294 Mon Sep 17 00:00:00 2001
From: Michael Buesch <mb@bu3sch.de>
Date: Thu, 18 Dec 2008 22:13:39 +0100
Subject: [PATCH 39/45] b43: Fix some MAC locking

This fixes some locking w.r.t. the lower MAC (firmware).
It also removes a lot of ancient IRQ-locking that's not needed anymore.
We simply suspend the MAC. That's easier and causes less trouble.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c       | 50 +++++----------------------
 drivers/net/wireless/b43/phy_common.c | 16 +++++++++
 drivers/net/wireless/b43/phy_g.c      |  8 +++--
 3 files changed, 30 insertions(+), 44 deletions(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index ba7a5ab7fe1d..07dc9886d968 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3324,7 +3324,6 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	unsigned long flags;
 	int antenna;
 	int err = 0;
-	u32 savedirqs;
 
 	mutex_lock(&wl->mutex);
 
@@ -3335,24 +3334,14 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	dev = wl->current_dev;
 	phy = &dev->phy;
 
+	b43_mac_suspend(dev);
+
 	if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 		b43_set_retry_limits(dev, conf->short_frame_max_tx_count,
 					  conf->long_frame_max_tx_count);
 	changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS;
 	if (!changed)
-		goto out_unlock_mutex;
-
-	/* Disable IRQs while reconfiguring the device.
-	 * This makes it possible to drop the spinlock throughout
-	 * the reconfiguration process. */
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	if (b43_status(dev) < B43_STAT_STARTED) {
-		spin_unlock_irqrestore(&wl->irq_lock, flags);
-		goto out_unlock_mutex;
-	}
-	savedirqs = b43_interrupt_disable(dev, B43_IRQ_ALL);
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	b43_synchronize_irq(dev);
+		goto out_mac_enable;
 
 	/* Switch to the requested channel.
 	 * The firmware takes care of races with the TX handler. */
@@ -3399,11 +3388,9 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 		}
 	}
 
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	b43_interrupt_enable(dev, savedirqs);
-	mmiowb();
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-      out_unlock_mutex:
+out_mac_enable:
+	b43_mac_enable(dev);
+out_unlock_mutex:
 	mutex_unlock(&wl->mutex);
 
 	return err;
@@ -3461,27 +3448,12 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 	struct b43_wldev *dev;
-	struct b43_phy *phy;
-	unsigned long flags;
-	u32 savedirqs;
 
 	mutex_lock(&wl->mutex);
 
 	dev = wl->current_dev;
-	phy = &dev->phy;
-
-	/* Disable IRQs while reconfiguring the device.
-	 * This makes it possible to drop the spinlock throughout
-	 * the reconfiguration process. */
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	if (b43_status(dev) < B43_STAT_STARTED) {
-		spin_unlock_irqrestore(&wl->irq_lock, flags);
+	if (!dev || b43_status(dev) < B43_STAT_STARTED)
 		goto out_unlock_mutex;
-	}
-	savedirqs = b43_interrupt_disable(dev, B43_IRQ_ALL);
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	b43_synchronize_irq(dev);
-
 	b43_mac_suspend(dev);
 
 	if (changed & BSS_CHANGED_BASIC_RATES)
@@ -3495,13 +3467,7 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	b43_mac_enable(dev);
-
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	b43_interrupt_enable(dev, savedirqs);
-	/* XXX: why? */
-	mmiowb();
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
- out_unlock_mutex:
+out_unlock_mutex:
 	mutex_unlock(&wl->mutex);
 
 	return;
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index af37abccccb3..2ebfc7d1508b 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -178,13 +178,27 @@ void b43_phy_unlock(struct b43_wldev *dev)
 		b43_power_saving_ctl_bits(dev, 0);
 }
 
+static inline void assert_mac_suspended(struct b43_wldev *dev)
+{
+	if (!B43_DEBUG)
+		return;
+	if ((b43_status(dev) >= B43_STAT_INITIALIZED) &&
+	    (dev->mac_suspended <= 0)) {
+		b43dbg(dev->wl, "PHY/RADIO register access with "
+		       "enabled MAC.\n");
+		dump_stack();
+	}
+}
+
 u16 b43_radio_read(struct b43_wldev *dev, u16 reg)
 {
+	assert_mac_suspended(dev);
 	return dev->phy.ops->radio_read(dev, reg);
 }
 
 void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
 {
+	assert_mac_suspended(dev);
 	dev->phy.ops->radio_write(dev, reg, value);
 }
 
@@ -208,11 +222,13 @@ void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
 
 u16 b43_phy_read(struct b43_wldev *dev, u16 reg)
 {
+	assert_mac_suspended(dev);
 	return dev->phy.ops->phy_read(dev, reg);
 }
 
 void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value)
 {
+	assert_mac_suspended(dev);
 	dev->phy.ops->phy_write(dev, reg, value);
 }
 
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 232181f6333c..3b1d673796cc 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -3047,6 +3047,8 @@ static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev)
 	int rfatt, bbatt;
 	u8 tx_control;
 
+	b43_mac_suspend(dev);
+
 	spin_lock_irq(&dev->wl->irq_lock);
 
 	/* Calculate the new attenuation values. */
@@ -3103,6 +3105,8 @@ static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev)
 			  gphy->tx_control);
 	b43_radio_unlock(dev);
 	b43_phy_unlock(dev);
+
+	b43_mac_enable(dev);
 }
 
 static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev,
@@ -3215,9 +3219,9 @@ static void b43_gphy_op_pwork_15sec(struct b43_wldev *dev)
 	struct b43_phy *phy = &dev->phy;
 	struct b43_phy_g *gphy = phy->g;
 
+	b43_mac_suspend(dev);
 	//TODO: update_aci_moving_average
 	if (gphy->aci_enable && gphy->aci_wlan_automatic) {
-		b43_mac_suspend(dev);
 		if (!gphy->aci_enable && 1 /*TODO: not scanning? */ ) {
 			if (0 /*TODO: bunch of conditions */ ) {
 				phy->ops->interf_mitigation(dev,
@@ -3227,12 +3231,12 @@ static void b43_gphy_op_pwork_15sec(struct b43_wldev *dev)
 			   if (/*(aci_average > 1000) &&*/ !b43_gphy_aci_scan(dev))
 				phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE);
 		}
-		b43_mac_enable(dev);
 	} else if (gphy->interfmode == B43_INTERFMODE_NONWLAN &&
 		   phy->rev == 1) {
 		//TODO: implement rev1 workaround
 	}
 	b43_lo_g_maintanance_work(dev);
+	b43_mac_enable(dev);
 }
 
 static void b43_gphy_op_pwork_60sec(struct b43_wldev *dev)

From e0cb686ff879dc9ac045ad7258ec687088d4e450 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 18 Dec 2008 23:35:13 +0200
Subject: [PATCH 40/45] mac80211: enable IEEE80211_CONF_PS only when associated

Also disable power save when disassociated. It makes no sense to have
power save enabled while disassociated.

iwlwifi seems to have this check in the driver, but it's better to do this
in mac80211 instead.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/ieee80211_i.h |  1 +
 net/mac80211/mlme.c        | 15 +++++++++++++--
 net/mac80211/wext.c        | 32 ++++++++++++++++++++++++++------
 3 files changed, 40 insertions(+), 8 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index a7dabaecfc72..18b91601770a 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -688,6 +688,7 @@ struct ieee80211_local {
 				*/
 	int wifi_wme_noack_test;
 	unsigned int wmm_acm; /* bit field of ACM bits (BIT(802.1D tag)) */
+	bool powersave;
 
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct local_debugfsdentries {
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 1374b8c750ab..dac8bd37dcf5 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -744,6 +744,11 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 	bss_info_changed |= BSS_CHANGED_BASIC_RATES;
 	ieee80211_bss_info_change_notify(sdata, bss_info_changed);
 
+	if (local->powersave) {
+		local->hw.conf.flags |= IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	}
+
 	netif_tx_start_all_queues(sdata->dev);
 	netif_carrier_on(sdata->dev);
 
@@ -812,7 +817,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 {
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
-	u32 changed = 0;
+	u32 changed = 0, config_changed = 0;
 
 	rcu_read_lock();
 
@@ -859,8 +864,14 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 
 	local->hw.conf.ht.enabled = false;
 	local->oper_channel_type = NL80211_CHAN_NO_HT;
-	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT);
+	config_changed |= IEEE80211_CONF_CHANGE_HT;
 
+	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
+		config_changed |= IEEE80211_CONF_CHANGE_PS;
+	}
+
+	ieee80211_hw_config(local, config_changed);
 	ieee80211_bss_info_change_notify(sdata, changed);
 
 	rcu_read_lock();
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 15428048d01a..f6640d047157 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -830,25 +830,46 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
 				    struct iw_param *wrq,
 				    char *extra)
 {
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_conf *conf = &local->hw.conf;
+	int ret = 0;
+	bool ps;
+
+	if (sdata->vif.type != NL80211_IFTYPE_STATION)
+		return -EINVAL;
 
 	if (wrq->disabled) {
-		conf->flags &= ~IEEE80211_CONF_PS;
-		return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+		ps = false;
+		goto set;
 	}
 
 	switch (wrq->flags & IW_POWER_MODE) {
 	case IW_POWER_ON:       /* If not specified */
 	case IW_POWER_MODE:     /* If set all mask */
 	case IW_POWER_ALL_R:    /* If explicitely state all */
-		conf->flags |= IEEE80211_CONF_PS;
+		ps = true;
 		break;
 	default:                /* Otherwise we don't support it */
 		return -EINVAL;
 	}
 
-	return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	if (ps == local->powersave)
+		return ret;
+
+set:
+	local->powersave = ps;
+
+	if (sdata->u.sta.flags & IEEE80211_STA_ASSOCIATED) {
+		if (local->powersave)
+			conf->flags |= IEEE80211_CONF_PS;
+		else
+			conf->flags &= ~IEEE80211_CONF_PS;
+
+		ret = ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	}
+
+	return ret;
 }
 
 static int ieee80211_ioctl_giwpower(struct net_device *dev,
@@ -857,9 +878,8 @@ static int ieee80211_ioctl_giwpower(struct net_device *dev,
 				    char *extra)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_conf *conf = &local->hw.conf;
 
-	wrqu->power.disabled = !(conf->flags & IEEE80211_CONF_PS);
+	wrqu->power.disabled = !local->powersave;
 
 	return 0;
 }

From ce7c9111a97492d04c504f40736a669c235d664a Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 18 Dec 2008 23:35:20 +0200
Subject: [PATCH 41/45] mac80211: track master queue status

This is a preparation for the dynamic power save support. In future there are
two paths to stop the master queues and we need to track this properly to
avoid starting queues incorrectly. Implement this by adding a status
array for each queue.

The original idea and design is from Johannes Berg, I just did
the implementation based on his notes. All the bugs are mine, of course.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/ieee80211_i.h | 12 +++++-
 net/mac80211/main.c        |  2 +
 net/mac80211/util.c        | 86 +++++++++++++++++++++++++++++++++++---
 3 files changed, 93 insertions(+), 7 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 18b91601770a..a74d6738b30a 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -538,6 +538,10 @@ enum {
 	IEEE80211_ADDBA_MSG	= 4,
 };
 
+enum queue_stop_reason {
+	IEEE80211_QUEUE_STOP_REASON_DRIVER,
+};
+
 /* maximum number of hardware queues we support. */
 #define QD_MAX_QUEUES (IEEE80211_MAX_AMPDU_QUEUES + IEEE80211_MAX_QUEUES)
 
@@ -554,7 +558,8 @@ struct ieee80211_local {
 	const struct ieee80211_ops *ops;
 
 	unsigned long queue_pool[BITS_TO_LONGS(QD_MAX_QUEUES)];
-
+	unsigned long queue_stop_reasons[IEEE80211_MAX_QUEUES];
+	spinlock_t queue_stop_reason_lock;
 	struct net_device *mdev; /* wmaster# - "master" 802.11 device */
 	int open_count;
 	int monitors, cooked_mntrs;
@@ -972,6 +977,11 @@ int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freq);
 u64 ieee80211_mandatory_rates(struct ieee80211_local *local,
 			      enum ieee80211_band band);
 
+void ieee80211_wake_queues_by_reason(struct ieee80211_hw *hw,
+				     enum queue_stop_reason reason);
+void ieee80211_stop_queues_by_reason(struct ieee80211_hw *hw,
+				     enum queue_stop_reason reason);
+
 #ifdef CONFIG_MAC80211_NOINLINE
 #define debug_noinline noinline
 #else
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index ab6b73647b3e..21335382f530 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -725,6 +725,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 
 	spin_lock_init(&local->key_lock);
 
+	spin_lock_init(&local->queue_stop_reason_lock);
+
 	INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
 
 	sta_info_init(local);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 71a8391c54f6..fb89e1d0aa03 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -330,10 +330,20 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
 }
 EXPORT_SYMBOL(ieee80211_ctstoself_duration);
 
-void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue)
+static void __ieee80211_wake_queue(struct ieee80211_hw *hw, int queue,
+				   enum queue_stop_reason reason)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 
+	/* we don't need to track ampdu queues */
+	if (queue < ieee80211_num_regular_queues(hw)) {
+		__clear_bit(reason, &local->queue_stop_reasons[queue]);
+
+		if (local->queue_stop_reasons[queue] != 0)
+			/* someone still has this queue stopped */
+			return;
+	}
+
 	if (test_bit(queue, local->queues_pending)) {
 		set_bit(queue, local->queues_pending_run);
 		tasklet_schedule(&local->tx_pending_tasklet);
@@ -341,22 +351,74 @@ void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue)
 		netif_wake_subqueue(local->mdev, queue);
 	}
 }
+
+void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
+				    enum queue_stop_reason reason)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+	__ieee80211_wake_queue(hw, queue, reason);
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+}
+
+void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue)
+{
+	ieee80211_wake_queue_by_reason(hw, queue,
+				       IEEE80211_QUEUE_STOP_REASON_DRIVER);
+}
 EXPORT_SYMBOL(ieee80211_wake_queue);
 
-void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue)
+static void __ieee80211_stop_queue(struct ieee80211_hw *hw, int queue,
+				   enum queue_stop_reason reason)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 
+	/* we don't need to track ampdu queues */
+	if (queue < ieee80211_num_regular_queues(hw))
+		__set_bit(reason, &local->queue_stop_reasons[queue]);
+
 	netif_stop_subqueue(local->mdev, queue);
 }
+
+void ieee80211_stop_queue_by_reason(struct ieee80211_hw *hw, int queue,
+				    enum queue_stop_reason reason)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+	__ieee80211_stop_queue(hw, queue, reason);
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+}
+
+void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue)
+{
+	ieee80211_stop_queue_by_reason(hw, queue,
+				       IEEE80211_QUEUE_STOP_REASON_DRIVER);
+}
 EXPORT_SYMBOL(ieee80211_stop_queue);
 
-void ieee80211_stop_queues(struct ieee80211_hw *hw)
+void ieee80211_stop_queues_by_reason(struct ieee80211_hw *hw,
+				    enum queue_stop_reason reason)
 {
+	struct ieee80211_local *local = hw_to_local(hw);
+	unsigned long flags;
 	int i;
 
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+
 	for (i = 0; i < ieee80211_num_queues(hw); i++)
-		ieee80211_stop_queue(hw, i);
+		__ieee80211_stop_queue(hw, i, reason);
+
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+}
+
+void ieee80211_stop_queues(struct ieee80211_hw *hw)
+{
+	ieee80211_stop_queues_by_reason(hw,
+					IEEE80211_QUEUE_STOP_REASON_DRIVER);
 }
 EXPORT_SYMBOL(ieee80211_stop_queues);
 
@@ -367,12 +429,24 @@ int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue)
 }
 EXPORT_SYMBOL(ieee80211_queue_stopped);
 
-void ieee80211_wake_queues(struct ieee80211_hw *hw)
+void ieee80211_wake_queues_by_reason(struct ieee80211_hw *hw,
+				     enum queue_stop_reason reason)
 {
+	struct ieee80211_local *local = hw_to_local(hw);
+	unsigned long flags;
 	int i;
 
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+
 	for (i = 0; i < hw->queues + hw->ampdu_queues; i++)
-		ieee80211_wake_queue(hw, i);
+		__ieee80211_wake_queue(hw, i, reason);
+
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+}
+
+void ieee80211_wake_queues(struct ieee80211_hw *hw)
+{
+	ieee80211_wake_queues_by_reason(hw, IEEE80211_QUEUE_STOP_REASON_DRIVER);
 }
 EXPORT_SYMBOL(ieee80211_wake_queues);
 

From 520eb82076993b7f55ef9b80771d264272e5127b Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 18 Dec 2008 23:35:27 +0200
Subject: [PATCH 42/45] mac80211: implement dynamic power save

This patch implements dynamic power save for mac80211. Basically it
means enabling power save mode after an idle period. Implementing it
dynamically gives a good compromise of low power consumption and low
latency. Some hardware have support for this in firmware, but some
require the host to do it.

The dynamic power save is implemented by adding an timeout to
ieee80211_subif_start_xmit(). The timeout can be enabled from userspace
with Wireless Extensions. For example, the command below enables the
dynamic power save and sets the time timeout to 500 ms:

iwconfig wlan0 power timeout 500m

Power save now only works with devices which handle power save in firmware.
It's also disabled by default and the heuristics when and how to enable is
considered as a policy decision and will be left for the userspace to handle.
In case the firmware has support for this, drivers can disable this feature
with IEEE80211_HW_NO_STACK_DYNAMIC_PS.

Big thanks to Johannes Berg for the help with the design and code.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/net/mac80211.h     |  6 +++++
 net/mac80211/ieee80211_i.h | 10 ++++++++
 net/mac80211/main.c        |  7 ++++++
 net/mac80211/mlme.c        | 49 ++++++++++++++++++++++++++++++++++++--
 net/mac80211/tx.c          | 13 ++++++++++
 net/mac80211/wext.c        | 30 +++++++++++++++--------
 6 files changed, 103 insertions(+), 12 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 9428d3e2f113..b3bd00a9d992 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -854,6 +854,11 @@ enum ieee80211_tkip_key_type {
  *
  * @IEEE80211_HW_AMPDU_AGGREGATION:
  *	Hardware supports 11n A-MPDU aggregation.
+ *
+ * @IEEE80211_HW_NO_STACK_DYNAMIC_PS:
+ *	Hardware which has dynamic power save support, meaning
+ *	that power save is enabled in idle periods, and don't need support
+ *	from stack.
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_RX_INCLUDES_FCS			= 1<<1,
@@ -866,6 +871,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_NOISE_DBM				= 1<<8,
 	IEEE80211_HW_SPECTRUM_MGMT			= 1<<9,
 	IEEE80211_HW_AMPDU_AGGREGATION			= 1<<10,
+	IEEE80211_HW_NO_STACK_DYNAMIC_PS		= 1<<11,
 };
 
 /**
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index a74d6738b30a..f3eec989662b 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -540,6 +540,7 @@ enum {
 
 enum queue_stop_reason {
 	IEEE80211_QUEUE_STOP_REASON_DRIVER,
+	IEEE80211_QUEUE_STOP_REASON_PS,
 };
 
 /* maximum number of hardware queues we support. */
@@ -693,7 +694,12 @@ struct ieee80211_local {
 				*/
 	int wifi_wme_noack_test;
 	unsigned int wmm_acm; /* bit field of ACM bits (BIT(802.1D tag)) */
+
 	bool powersave;
+	int dynamic_ps_timeout;
+	struct work_struct dynamic_ps_enable_work;
+	struct work_struct dynamic_ps_disable_work;
+	struct timer_list dynamic_ps_timer;
 
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct local_debugfsdentries {
@@ -977,6 +983,10 @@ int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freq);
 u64 ieee80211_mandatory_rates(struct ieee80211_local *local,
 			      enum ieee80211_band band);
 
+void ieee80211_dynamic_ps_enable_work(struct work_struct *work);
+void ieee80211_dynamic_ps_disable_work(struct work_struct *work);
+void ieee80211_dynamic_ps_timer(unsigned long data);
+
 void ieee80211_wake_queues_by_reason(struct ieee80211_hw *hw,
 				     enum queue_stop_reason reason);
 void ieee80211_stop_queues_by_reason(struct ieee80211_hw *hw,
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 21335382f530..24b14363d6e7 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -729,6 +729,13 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 
 	INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
 
+	INIT_WORK(&local->dynamic_ps_enable_work,
+		  ieee80211_dynamic_ps_enable_work);
+	INIT_WORK(&local->dynamic_ps_disable_work,
+		  ieee80211_dynamic_ps_disable_work);
+	setup_timer(&local->dynamic_ps_timer,
+		    ieee80211_dynamic_ps_timer, (unsigned long) local);
+
 	sta_info_init(local);
 
 	tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index dac8bd37dcf5..5ba721b6a399 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -745,8 +745,14 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 	ieee80211_bss_info_change_notify(sdata, bss_info_changed);
 
 	if (local->powersave) {
-		local->hw.conf.flags |= IEEE80211_CONF_PS;
-		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+		if (local->dynamic_ps_timeout > 0)
+			mod_timer(&local->dynamic_ps_timer, jiffies +
+				  msecs_to_jiffies(local->dynamic_ps_timeout));
+		else {
+			conf->flags |= IEEE80211_CONF_PS;
+			ieee80211_hw_config(local,
+					    IEEE80211_CONF_CHANGE_PS);
+		}
 	}
 
 	netif_tx_start_all_queues(sdata->dev);
@@ -866,6 +872,9 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	local->oper_channel_type = NL80211_CHAN_NO_HT;
 	config_changed |= IEEE80211_CONF_CHANGE_HT;
 
+	del_timer_sync(&local->dynamic_ps_timer);
+	cancel_work_sync(&local->dynamic_ps_enable_work);
+
 	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
 		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
 		config_changed |= IEEE80211_CONF_CHANGE_PS;
@@ -2593,3 +2602,39 @@ void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
 		ieee80211_restart_sta_timer(sdata);
 	rcu_read_unlock();
 }
+
+void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local,
+			     dynamic_ps_disable_work);
+
+	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	}
+
+	ieee80211_wake_queues_by_reason(&local->hw,
+					IEEE80211_QUEUE_STOP_REASON_PS);
+}
+
+void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local,
+			     dynamic_ps_enable_work);
+
+	if (local->hw.conf.flags & IEEE80211_CONF_PS)
+		return;
+
+	local->hw.conf.flags |= IEEE80211_CONF_PS;
+
+	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+}
+
+void ieee80211_dynamic_ps_timer(unsigned long data)
+{
+	struct ieee80211_local *local = (void *) data;
+
+	queue_work(local->hw.workqueue, &local->dynamic_ps_enable_work);
+}
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index b098c58d216f..a4af3a124cce 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1473,6 +1473,19 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 		goto fail;
 	}
 
+	if (!(local->hw.flags & IEEE80211_HW_NO_STACK_DYNAMIC_PS) &&
+	    local->dynamic_ps_timeout > 0) {
+		if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+			ieee80211_stop_queues_by_reason(&local->hw,
+							IEEE80211_QUEUE_STOP_REASON_PS);
+			queue_work(local->hw.workqueue,
+				   &local->dynamic_ps_disable_work);
+		}
+
+		mod_timer(&local->dynamic_ps_timer, jiffies +
+			  msecs_to_jiffies(local->dynamic_ps_timeout));
+	}
+
 	nh_pos = skb_network_header(skb) - skb->data;
 	h_pos = skb_transport_header(skb) - skb->data;
 
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index f6640d047157..7162d5816f39 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -833,7 +833,7 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_conf *conf = &local->hw.conf;
-	int ret = 0;
+	int ret = 0, timeout = 0;
 	bool ps;
 
 	if (sdata->vif.type != NL80211_IFTYPE_STATION)
@@ -841,6 +841,7 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
 
 	if (wrq->disabled) {
 		ps = false;
+		timeout = 0;
 		goto set;
 	}
 
@@ -850,22 +851,31 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
 	case IW_POWER_ALL_R:    /* If explicitely state all */
 		ps = true;
 		break;
-	default:                /* Otherwise we don't support it */
-		return -EINVAL;
+	default:                /* Otherwise we ignore */
+		break;
 	}
 
-	if (ps == local->powersave)
-		return ret;
+	if (wrq->flags & IW_POWER_TIMEOUT)
+		timeout = wrq->value / 1000;
 
 set:
+	if (ps == local->powersave && timeout == local->dynamic_ps_timeout)
+		return ret;
+
 	local->powersave = ps;
+	local->dynamic_ps_timeout = timeout;
 
 	if (sdata->u.sta.flags & IEEE80211_STA_ASSOCIATED) {
-		if (local->powersave)
-			conf->flags |= IEEE80211_CONF_PS;
-		else
-			conf->flags &= ~IEEE80211_CONF_PS;
-
+		if (!(local->hw.flags & IEEE80211_HW_NO_STACK_DYNAMIC_PS) &&
+		    local->dynamic_ps_timeout > 0)
+			mod_timer(&local->dynamic_ps_timer, jiffies +
+				  msecs_to_jiffies(local->dynamic_ps_timeout));
+		else {
+			if (local->powersave)
+				conf->flags |= IEEE80211_CONF_PS;
+			else
+				conf->flags &= ~IEEE80211_CONF_PS;
+		}
 		ret = ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
 	}
 

From fd6effcaf8a894c0a0f602b943dbc54a170d4418 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Thu, 18 Dec 2008 23:23:05 -0500
Subject: [PATCH 43/45] ath5k: correct packet length in tx descriptors

Packet length calculation (which includes frame check sequence)
should take into account whether we add a pad field or not.
Extract the calculation into a helper and use it in both places.

Changes to desc.c
Changes-licensed-under: ISC

Changes to ath5k.h, base.c
Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath5k/ath5k.h | 5 +++++
 drivers/net/wireless/ath5k/base.c  | 8 ++++----
 drivers/net/wireless/ath5k/desc.c  | 4 ++--
 3 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h
index 13df1191b070..183ffc8e62ca 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -1350,4 +1350,9 @@ static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
 	return retval;
 }
 
+static inline int ath5k_pad_size(int hdrlen)
+{
+	return (hdrlen < 24) ? 0 : hdrlen & 3;
+}
+
 #endif
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 9b5f31aab574..4af2607deec0 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -1762,8 +1762,8 @@ accept:
 		 * not try to remove padding from short control frames that do
 		 * not have payload. */
 		hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-		padsize = hdrlen & 3;
-		if (padsize && hdrlen >= 24) {
+		padsize = ath5k_pad_size(hdrlen);
+		if (padsize) {
 			memmove(skb->data + padsize, skb->data, hdrlen);
 			skb_pull(skb, padsize);
 		}
@@ -2638,8 +2638,8 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 * if this is not the case we add the padding after the header
 	 */
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-	padsize = hdrlen & 3;
-	if (padsize && hdrlen >= 24) {
+	padsize = ath5k_pad_size(hdrlen);
+	if (padsize) {
 
 		if (skb_headroom(skb) < padsize) {
 			ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c
index 5e362a7a3620..b40a9287a39a 100644
--- a/drivers/net/wireless/ath5k/desc.c
+++ b/drivers/net/wireless/ath5k/desc.c
@@ -71,7 +71,7 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 	/* Verify and set frame length */
 
 	/* remove padding we might have added before */
-	frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
+	frame_len = pkt_len - ath5k_pad_size(hdr_len) + FCS_LEN;
 
 	if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
 		return -EINVAL;
@@ -202,7 +202,7 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
 	/* Verify and set frame length */
 
 	/* remove padding we might have added before */
-	frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
+	frame_len = pkt_len - ath5k_pad_size(hdr_len) + FCS_LEN;
 
 	if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
 		return -EINVAL;

From b929ecf7965c2dab7e373f390ac5fc563011484d Mon Sep 17 00:00:00 2001
From: Michael Buesch <mb@bu3sch.de>
Date: Fri, 19 Dec 2008 18:40:00 +0100
Subject: [PATCH 44/45] b43: Suspend MAC while killing the radio

We should suspend the MAC, before we kill the radio. This gives
the MAC a chance to leave any TX/RX state and it avoids races on
the PHY/RADIO registers.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 2ebfc7d1508b..026b61c03fb9 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -296,8 +296,10 @@ void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state)
 		state = RFKILL_STATE_SOFT_BLOCKED;
 	}
 
+	b43_mac_suspend(dev);
 	phy->ops->software_rfkill(dev, state);
 	phy->radio_on = (state == RFKILL_STATE_UNBLOCKED);
+	b43_mac_enable(dev);
 }
 
 /**

From 9cf7f247bd0cd21e475c71a4e018bb612ef02aab Mon Sep 17 00:00:00 2001
From: Michael Buesch <mb@bu3sch.de>
Date: Fri, 19 Dec 2008 20:24:30 +0100
Subject: [PATCH 45/45] b43: Add key memory dumping

This adds an option to dump all crypto related memory to
the kernel log.
Obviously, it should not be enabled on productive systems. ;)

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/debugfs.c |  1 +
 drivers/net/wireless/b43/debugfs.h |  1 +
 drivers/net/wireless/b43/main.c    | 53 ++++++++++++++++++++++++++++--
 3 files changed, 53 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index 06a01da80160..e04fc91f569e 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -731,6 +731,7 @@ static void b43_add_dynamic_debug(struct b43_wldev *dev)
 	add_dyn_dbg("debug_pwork_stop", B43_DBG_PWORK_STOP, 0);
 	add_dyn_dbg("debug_lo", B43_DBG_LO, 0);
 	add_dyn_dbg("debug_firmware", B43_DBG_FIRMWARE, 0);
+	add_dyn_dbg("debug_keys", B43_DBG_KEYS, 0);
 
 #undef add_dyn_dbg
 }
diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h
index 22ffd02ba554..7886cbe2d1d1 100644
--- a/drivers/net/wireless/b43/debugfs.h
+++ b/drivers/net/wireless/b43/debugfs.h
@@ -12,6 +12,7 @@ enum b43_dyndbg {		/* Dynamic debugging features */
 	B43_DBG_PWORK_STOP,
 	B43_DBG_LO,
 	B43_DBG_FIRMWARE,
+	B43_DBG_KEYS,
 	__B43_NR_DYNDBG,
 };
 
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 07dc9886d968..7b31a327b24a 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -992,6 +992,52 @@ static void b43_clear_keys(struct b43_wldev *dev)
 		b43_key_clear(dev, i);
 }
 
+static void b43_dump_keymemory(struct b43_wldev *dev)
+{
+	unsigned int i, index, offset;
+	DECLARE_MAC_BUF(macbuf);
+	u8 mac[ETH_ALEN];
+	u16 algo;
+	u32 rcmta0;
+	u16 rcmta1;
+	u64 hf;
+	struct b43_key *key;
+
+	if (!b43_debug(dev, B43_DBG_KEYS))
+		return;
+
+	hf = b43_hf_read(dev);
+	b43dbg(dev->wl, "Hardware key memory dump:  USEDEFKEYS=%u\n",
+	       !!(hf & B43_HF_USEDEFKEYS));
+	for (index = 0; index < dev->max_nr_keys; index++) {
+		key = &(dev->key[index]);
+		printk(KERN_DEBUG "Key slot %02u: %s",
+		       index, (key->keyconf == NULL) ? " " : "*");
+		offset = dev->ktp + (index * B43_SEC_KEYSIZE);
+		for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
+			u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i);
+			printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF));
+		}
+
+		algo = b43_shm_read16(dev, B43_SHM_SHARED,
+				      B43_SHM_SH_KEYIDXBLOCK + (index * 2));
+		printk("   Algo: %04X/%02X", algo, key->algorithm);
+
+		if (index >= 4) {
+			rcmta0 = b43_shm_read32(dev, B43_SHM_RCMTA,
+						((index - 4) * 2) + 0);
+			rcmta1 = b43_shm_read16(dev, B43_SHM_RCMTA,
+						((index - 4) * 2) + 1);
+			*((__le32 *)(&mac[0])) = cpu_to_le32(rcmta0);
+			*((__le16 *)(&mac[4])) = cpu_to_le16(rcmta1);
+			printk("   MAC: %s",
+			       print_mac(macbuf, mac));
+		} else
+			printk("   DEFAULT KEY");
+		printk("\n");
+	}
+}
+
 void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 {
 	u32 macctl;
@@ -3565,15 +3611,18 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	default:
 		B43_WARN_ON(1);
 	}
+
 out_unlock:
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	mutex_unlock(&wl->mutex);
 	if (!err) {
 		b43dbg(wl, "%s hardware based encryption for keyidx: %d, "
 		       "mac: %pM\n",
 		       cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
 		       addr);
+		b43_dump_keymemory(dev);
 	}
+	spin_unlock_irqrestore(&wl->irq_lock, flags);
+	mutex_unlock(&wl->mutex);
+
 	return err;
 }