[JFFS2] Speed up mount for directly-mapped NOR flash

Remove excessive scanning of empty flash after a clean
marker for users of the point/unpoint method. cfi_cmdset_0001
uses point/unpoint by default iff flash mapping is linear.
The speedup is several orders of magnitude if FS is less than
half full.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
This commit is contained in:
Joakim Tjernlund 2007-03-27 13:32:09 +02:00 committed by David Woodhouse
parent 10731f8300
commit c2aecda79c
1 changed files with 11 additions and 4 deletions

View File

@ -636,16 +636,17 @@ scan_more:
if (*(uint32_t *)(&buf[ofs-buf_ofs]) == 0xffffffff) {
uint32_t inbuf_ofs;
uint32_t empty_start;
uint32_t empty_start, scan_end;
empty_start = ofs;
ofs += 4;
scan_end = min_t(uint32_t, EMPTY_SCAN_SIZE(c->sector_size)/8, buf_len);
D1(printk(KERN_DEBUG "Found empty flash at 0x%08x\n", ofs));
more_empty:
inbuf_ofs = ofs - buf_ofs;
while (inbuf_ofs < buf_len) {
if (*(uint32_t *)(&buf[inbuf_ofs]) != 0xffffffff) {
while (inbuf_ofs < scan_end) {
if (unlikely(*(uint32_t *)(&buf[inbuf_ofs]) != 0xffffffff)) {
printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n",
empty_start, ofs);
if ((err = jffs2_scan_dirty_space(c, jeb, ofs-empty_start)))
@ -666,7 +667,11 @@ scan_more:
D1(printk(KERN_DEBUG "%d bytes at start of block seems clean... assuming all clean\n", EMPTY_SCAN_SIZE(c->sector_size)));
return BLK_STATE_CLEANMARKER;
}
if (!buf_size && (scan_end != buf_len)) {/* XIP/point case */
scan_end = buf_len;
goto more_empty;
}
/* See how much more there is to read in this eraseblock... */
buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
if (!buf_len) {
@ -676,6 +681,8 @@ scan_more:
empty_start));
break;
}
/* point never reaches here */
scan_end = buf_len;
D1(printk(KERN_DEBUG "Reading another 0x%x at 0x%08x\n", buf_len, ofs));
err = jffs2_fill_scan_buf(c, buf, ofs, buf_len);
if (err)