ARM: OMAP2+: hwmod: fix _idle() hwmod state sanity check sequence
The omap_hwmod _enable() function can return success without setting
the hwmod state to _HWMOD_STATE_ENABLED for IPs with reset lines when
all of the reset lines are asserted. The omap_hwmod _idle() function
also performs a similar check, but after checking for the hwmod state
first. This triggers the WARN when pm_runtime_get and pm_runtime_put
are invoked on IPs with all reset lines asserted. Reverse the checks
for hwmod state and reset lines status to fix this.
Issue found during a unbind operation on a device with reset lines
still asserted, example backtrace below
------------[ cut here ]------------
WARNING: CPU: 1 PID: 879 at arch/arm/mach-omap2/omap_hwmod.c:2207 _idle+0x1e4/0x240()
omap_hwmod: mmu_dsp: idle state can only be entered from enabled state
Modules linked in:
CPU: 1 PID: 879 Comm: sh Not tainted 4.4.0-00008-ga989d951331a #3
Hardware name: Generic OMAP5 (Flattened Device Tree)
[<c0018e60>] (unwind_backtrace) from [<c0014dc4>] (show_stack+0x10/0x14)
[<c0014dc4>] (show_stack) from [<c037ac28>] (dump_stack+0x90/0xc0)
[<c037ac28>] (dump_stack) from [<c003f420>] (warn_slowpath_common+0x78/0xb4)
[<c003f420>] (warn_slowpath_common) from [<c003f48c>] (warn_slowpath_fmt+0x30/0x40)
[<c003f48c>] (warn_slowpath_fmt) from [<c0028c20>] (_idle+0x1e4/0x240)
[<c0028c20>] (_idle) from [<c0029080>] (omap_hwmod_idle+0x28/0x48)
[<c0029080>] (omap_hwmod_idle) from [<c002a5a4>] (omap_device_idle+0x3c/0x90)
[<c002a5a4>] (omap_device_idle) from [<c0427a90>] (__rpm_callback+0x2c/0x60)
[<c0427a90>] (__rpm_callback) from [<c0427ae4>] (rpm_callback+0x20/0x80)
[<c0427ae4>] (rpm_callback) from [<c0427f84>] (rpm_suspend+0x138/0x74c)
[<c0427f84>] (rpm_suspend) from [<c0428b78>] (__pm_runtime_idle+0x78/0xa8)
[<c0428b78>] (__pm_runtime_idle) from [<c041f514>] (__device_release_driver+0x64/0x100)
[<c041f514>] (__device_release_driver) from [<c041f5d0>] (device_release_driver+0x20/0x2c)
[<c041f5d0>] (device_release_driver) from [<c041d85c>] (unbind_store+0x78/0xf8)
[<c041d85c>] (unbind_store) from [<c0206df8>] (kernfs_fop_write+0xc0/0x1c4)
[<c0206df8>] (kernfs_fop_write) from [<c018a120>] (__vfs_write+0x20/0xdc)
[<c018a120>] (__vfs_write) from [<c018a9cc>] (vfs_write+0x90/0x164)
[<c018a9cc>] (vfs_write) from [<c018b1f0>] (SyS_write+0x44/0x9c)
[<c018b1f0>] (SyS_write) from [<c0010420>] (ret_fast_syscall+0x0/0x1c)
---[ end trace a4182013c75a9f50 ]---
While at this, fix the sequence in _shutdown() as well, though there
is no easy reproducible scenario.
Fixes: 747834ab83
("ARM: OMAP2+: hwmod: revise hardreset behavior")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
This commit is contained in:
parent
22d20cb487
commit
c20c8f750d
|
@ -2207,15 +2207,15 @@ static int _idle(struct omap_hwmod *oh)
|
|||
|
||||
pr_debug("omap_hwmod: %s: idling\n", oh->name);
|
||||
|
||||
if (_are_all_hardreset_lines_asserted(oh))
|
||||
return 0;
|
||||
|
||||
if (oh->_state != _HWMOD_STATE_ENABLED) {
|
||||
WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n",
|
||||
oh->name);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (_are_all_hardreset_lines_asserted(oh))
|
||||
return 0;
|
||||
|
||||
if (oh->class->sysc)
|
||||
_idle_sysc(oh);
|
||||
_del_initiator_dep(oh, mpu_oh);
|
||||
|
@ -2262,6 +2262,9 @@ static int _shutdown(struct omap_hwmod *oh)
|
|||
int ret, i;
|
||||
u8 prev_state;
|
||||
|
||||
if (_are_all_hardreset_lines_asserted(oh))
|
||||
return 0;
|
||||
|
||||
if (oh->_state != _HWMOD_STATE_IDLE &&
|
||||
oh->_state != _HWMOD_STATE_ENABLED) {
|
||||
WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n",
|
||||
|
@ -2269,9 +2272,6 @@ static int _shutdown(struct omap_hwmod *oh)
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (_are_all_hardreset_lines_asserted(oh))
|
||||
return 0;
|
||||
|
||||
pr_debug("omap_hwmod: %s: disabling\n", oh->name);
|
||||
|
||||
if (oh->class->pre_shutdown) {
|
||||
|
|
Loading…
Reference in New Issue