ARM: DT updates for v4.4

As usual, this is the massive branch we have for each release. Lots of
 various updates and additions of hardware descriptions on existing hardware,
 as well as the usual additions of new boards and SoCs.
 
 This is also the first release where we've started mixing 64- and 32-bit
 DT updates in one branch.
 
 (Specific details on what's actually here and new is pretty easy to tell
 from the diffstat, so there's little point in duplicating listing it here.)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQT2WAAoJEIwa5zzehBx37tgQAIBe5eDJFXFihTlyOQ2plL3q
 vVH4OCzXIHELfM1J8CGZNah1wCQqNOts8RAmDCzxr+zSYuLOwJOEDZ6NKmErMxl0
 NTj3+BsqKO3NRym970ofPqU9JRLQmpZ8K7dzk8Nwj2+r1WZHFu/j6Jv44n/Ns0lw
 7+wxnG322lTm7SnvALCMD5lD4Y7VpThooWy5SdFtRoAetn+cLbVCJIeeQvO6Vxkp
 NooeJR0t2e8cpbAND5Jwu6eeWRcIbrvgjYDe0omhrIY05i9yNvIsC2HuQFGjF43z
 p2CnQvcKnhOXTZw3yse1Fx5igA7jqwVjjC/lVeDyxhusAtLpmuB6qbSaj7DpqkSQ
 nJxX1d49WKm68K+aknmee1kYRrvc4DE/kORI4IxXnsVNMu16ifTVLnxKgUhwzukb
 eZdTP6rsqgNozaYvh0k1vfSFd+CNSkBg+E9nrI3tU95yo3LOIhobVBCvBcWlmUvQ
 JdavRztqosChjIx3a9i1eCNKJtCg9p4m+gWjUqVVWsxBHe/3HojzjZnsBSynIQMA
 uGIVm0TKhNl1Svxl3oJo9257UCUK7+5PqJHK9IHrcWDULYx05JGSjuZcyvNS6Fo+
 u1DMf0ud4gXJYhecFBa7b3zRjk5YxptgCCTjeEEOTUJbbhZqDjGFZlNuFi6dmqD3
 ILJ2QMe/DGiPIlUmCfsx
 =qY1q
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "As usual, this is the massive branch we have for each release.  Lots
  of various updates and additions of hardware descriptions on existing
  hardware, as well as the usual additions of new boards and SoCs.

  This is also the first release where we've started mixing 64- and
  32-bit DT updates in one branch.

  (Specific details on what's actually here and new is pretty easy to
  tell from the diffstat, so there's little point in duplicating listing
  it here)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits)
  ARM: dts: uniphier: add system-bus-controller nodes
  ARM64: juno: disable NOR flash node by default
  ARM: dts: uniphier: add outer cache controller nodes
  arm64: defconfig: Enable PCI generic host bridge by default
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
  ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
  dts/Makefile: Add build support for LS2080a QDS & RDB board DTS
  dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards
  dts/ls2080a: Update Simulator DTS to add support of various peripherals
  dts/ls2080a: Remove text about writing to Free Software Foundation
  dts/ls2080a: Update DTSI to add support of various peripherals
  doc: DTS: Update DWC3 binding to provide reference to generic bindings
  doc/bindings: Update GPIO devicetree binding documentation for LS2080A
  Documentation/dts: Move FSL board-specific bindings out of /powerpc
  Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
  arm64: Rename FSL LS2085A SoC support code to LS2080A
  arm64: Use generic Layerscape SoC family naming
  ARM: dts: uniphier: add ProXstream2 Vodka board support
  ARM: dts: uniphier: add ProXstream2 Gentil board support
  ...
This commit is contained in:
Linus Torvalds 2015-11-10 15:06:26 -08:00
commit c0d6fe2f01
433 changed files with 20796 additions and 3469 deletions

View File

@ -9,6 +9,12 @@ Boards with the Amlogic Meson8 SoC shall have the following properties:
Required root node property:
compatible: "amlogic,meson8";
Boards with the Amlogic Meson8b SoC shall have the following properties:
Required root node property:
compatible: "amlogic,meson8b";
Board compatible values:
- "geniatech,atv1200"
- "minix,neo-x8"
- "geniatech,atv1200" (Meson6)
- "minix,neo-x8" (Meson8)
- "tronfy,mxq" (Meson8b)
- "hardkernel,odroid-c1" (Meson8b)

View File

@ -0,0 +1,17 @@
APM X-GENE SoC series SCU Registers
This system clock unit contain various register that control block resets,
clock enable/disables, clock divisors and other deepsleep registers.
Properties:
- compatible : should contain two values. First value must be:
- "apm,xgene-scu"
second value must be always "syscon".
- reg : offset and length of the register set.
Example :
scu: system-clk-controller@17000000 {
compatible = "apm,xgene-scu","syscon";
reg = <0x0 0x17000000 0x0 0x400>;
};

View File

@ -20,6 +20,25 @@ system control is required:
- compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
- compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
hif-cpubiuctrl node
-------------------
SoCs with Broadcom Brahma15 ARM-based CPUs have a specific Bus Interface Unit
(BIU) block which controls and interfaces the CPU complex to the different
Memory Controller Ports (MCP), one per memory controller (MEMC). This BIU block
offers a feature called Write Pairing which consists in collapsing two adjacent
cache lines into a single (bursted) write transaction towards the memory
controller (MEMC) to maximize write bandwidth.
Required properties:
- compatible: must be "brcm,bcm7445-hif-cpubiuctrl", "syscon"
Optional properties:
- brcm,write-pairing:
Boolean property, which when present indicates that the chip
supports write-pairing.
example:
rdb {
#address-cells = <1>;
@ -35,6 +54,7 @@ example:
hif_cpubiuctrl: syscon@3e2400 {
compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
reg = <0x3e2400 0x5b4>;
brcm,write-pairing;
};
hif_continuation: syscon@452000 {
@ -43,8 +63,7 @@ example:
};
};
Lastly, nodes that allow for support of SMP initialization and reboot are
required:
Nodes that allow for support of SMP initialization and reboot are required:
smpboot
-------
@ -95,3 +114,142 @@ example:
compatible = "brcm,brcmstb-reboot";
syscon = <&sun_top_ctrl 0x304 0x308>;
};
Power management
----------------
For power management (particularly, S2/S3/S5 system suspend), the following SoC
components are needed:
= Always-On control block (AON CTRL)
This hardware provides control registers for the "always-on" (even in low-power
modes) hardware, such as the Power Management State Machine (PMSM).
Required properties:
- compatible : should contain "brcm,brcmstb-aon-ctrl"
- reg : the register start and length for the AON CTRL block
Example:
aon-ctrl@410000 {
compatible = "brcm,brcmstb-aon-ctrl";
reg = <0x410000 0x400>;
};
= Memory controllers
A Broadcom STB SoC typically has a number of independent memory controllers,
each of which may have several associated hardware blocks, which are versioned
independently (control registers, DDR PHYs, etc.). One might consider
describing these controllers as a parent "memory controllers" block, which
contains N sub-nodes (one for each controller in the system), each of which is
associated with a number of hardware register resources (e.g., its PHY). See
the example device tree snippet below.
== MEMC (MEMory Controller)
Represents a single memory controller instance.
Required properties:
- compatible : should contain "brcm,brcmstb-memc" and "simple-bus"
Should contain subnodes for any of the following relevant hardware resources:
== DDR PHY control
Control registers for this memory controller's DDR PHY.
Required properties:
- compatible : should contain one of these
"brcm,brcmstb-ddr-phy-v225.1"
"brcm,brcmstb-ddr-phy-v240.1"
"brcm,brcmstb-ddr-phy-v240.2"
- reg : the DDR PHY register range
== DDR SHIMPHY
Control registers for this memory controller's DDR SHIMPHY.
Required properties:
- compatible : should contain "brcm,brcmstb-ddr-shimphy-v1.0"
- reg : the DDR SHIMPHY register range
== MEMC DDR control
Sequencer DRAM parameters and control registers. Used for Self-Refresh
Power-Down (SRPD), among other things.
Required properties:
- compatible : should contain "brcm,brcmstb-memc-ddr"
- reg : the MEMC DDR register range
Example:
memory_controllers {
ranges;
compatible = "simple-bus";
memc@0 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges;
ddr-phy@f1106000 {
compatible = "brcm,brcmstb-ddr-phy-v240.1";
reg = <0xf1106000 0x21c>;
};
shimphy@f1108000 {
compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
reg = <0xf1108000 0xe4>;
};
memc-ddr@f1102000 {
reg = <0xf1102000 0x800>;
compatible = "brcm,brcmstb-memc-ddr";
};
};
memc@1 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges;
ddr-phy@f1186000 {
compatible = "brcm,brcmstb-ddr-phy-v240.1";
reg = <0xf1186000 0x21c>;
};
shimphy@f1188000 {
compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
reg = <0xf1188000 0xe4>;
};
memc-ddr@f1182000 {
reg = <0xf1182000 0x800>;
compatible = "brcm,brcmstb-memc-ddr";
};
};
memc@2 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges;
ddr-phy@f1206000 {
compatible = "brcm,brcmstb-ddr-phy-v240.1";
reg = <0xf1206000 0x21c>;
};
shimphy@f1208000 {
compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
reg = <0xf1208000 0xe4>;
};
memc-ddr@f1202000 {
reg = <0xf1202000 0x800>;
compatible = "brcm,brcmstb-memc-ddr";
};
};
};

View File

@ -0,0 +1,34 @@
Broadcom Northstar Plus device tree bindings
--------------------------------------------
Broadcom Northstar Plus family of SoCs are used for switching control
and management applications as well as residential router/gateway
applications. The SoC features dual core Cortex A9 ARM CPUs, integrating
several peripheral interfaces including multiple Gigabit Ethernet PHYs,
DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash,
SATA and several other IO controllers.
Boards with Northstar Plus SoCs shall have the following properties:
Required root node property:
BCM58522
compatible = "brcm,bcm58522", "brcm,nsp";
BCM58525
compatible = "brcm,bcm58525", "brcm,nsp";
BCM58535
compatible = "brcm,bcm58535", "brcm,nsp";
BCM58622
compatible = "brcm,bcm58622", "brcm,nsp";
BCM58623
compatible = "brcm,bcm58623", "brcm,nsp";
BCM58625
compatible = "brcm,bcm58625", "brcm,nsp";
BCM88312
compatible = "brcm,bcm88312", "brcm,nsp";

View File

@ -195,6 +195,8 @@ nodes to be present and contain the properties described below.
"marvell,armada-380-smp"
"marvell,armada-390-smp"
"marvell,armada-xp-smp"
"mediatek,mt6589-smp"
"mediatek,mt81xx-tz-smp"
"qcom,gcc-msm8660"
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"

View File

@ -128,10 +128,18 @@ Example:
reg = <0x0 0x1ee0000 0x0 0x10000>;
};
Freescale LS2085A SoC Device Tree Bindings
------------------------------------------
Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
----------------------------------------------------------------
LS2085A ARMv8 based Simulator model
LS2080A ARMv8 based Simulator model
Required root node properties:
- compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
- compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
LS2080A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
LS2080A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";

View File

@ -20,6 +20,10 @@ HiKey Board
Required root node properties:
- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
HiP05 D02 Board
Required root node properties:
- compatible = "hisilicon,hip05-d02";
Hisilicon system controller
Required properties:

View File

@ -9,12 +9,26 @@ Required properties:
the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550
type UART should use the specified compatible for those devices.
SoC families:
- Keystone 2 generic SoC:
compatible = "ti,keystone"
SoCs:
- Keystone 2 Hawking/Kepler
compatible = "ti,k2hk", "ti,keystone"
- Keystone 2 Lamarr
compatible = "ti,k2l", "ti,keystone"
- Keystone 2 Edison
compatible = "ti,k2e", "ti,keystone"
Boards:
- Keystone 2 Hawking/Kepler EVM
compatible = "ti,k2hk-evm","ti,keystone"
compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"
- Keystone 2 Lamarr EVM
compatible = "ti,k2l-evm","ti,keystone"
compatible = "ti,k2l-evm", "ti, k2l", "ti,keystone"
- Keystone 2 Edison EVM
compatible = "ti,k2e-evm","ti,keystone"
compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"

View File

@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
Required properties:
- compatible : should be one of
"apm,potenza-pmu"
"arm,armv8-pmuv3"
"arm.cortex-a57-pmu"
"arm.cortex-a53-pmu"

View File

@ -17,6 +17,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "radxa,rock", "rockchip,rk3188";
- Radxa Rock2 Square board:
Required root node properties:
- compatible = "radxa,rock2-square", "rockchip,rk3288";
- Firefly Firefly-RK3288 board:
Required root node properties:
- compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
@ -31,6 +35,13 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "netxeon,r89", "rockchip,rk3288";
- Google Jaq (Haier Chromebook 11 and more):
Required root node properties:
- compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
"google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
"google,veyron-jaq-rev1", "google,veyron-jaq",
"google,veyron", "rockchip,rk3288";
- Google Jerry (Hisense Chromebook C11 and more):
Required root node properties:
- compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",

View File

@ -1,27 +0,0 @@
* Samsung's Exynos SoC based boards
Required root node properties:
- compatible = should be one or more of the following.
- "samsung,monk" - for Exynos3250-based Samsung Simband board.
- "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
- "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.
- "samsung,trats" - for Exynos4210-based Tizen Reference board.
- "samsung,universal_c210" - for Exynos4210-based Samsung board.
- "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board.
- "samsung,trats2" - for Exynos4412-based Tizen Reference board.
- "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board.
- "samsung,xyref5260" - for Exynos5260-based Samsung board.
- "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
- "samsung,sd5v1" - for Exynos5440-based Samsung board.
- "samsung,ssdk5440" - for Exynos5440-based Samsung board.
Optional:
- firmware node, specifying presence and type of secure firmware:
- compatible: only "samsung,secure-firmware" is currently supported
- reg: address of non-secure SYSRAM used for communication with firmware
firmware@0203F000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};

View File

@ -0,0 +1,69 @@
* Samsung's Exynos SoC based boards
Required root node properties:
- compatible = should be one or more of the following.
- "samsung,monk" - for Exynos3250-based Samsung Simband board.
- "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
- "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.
- "samsung,trats" - for Exynos4210-based Tizen Reference board.
- "samsung,universal_c210" - for Exynos4210-based Samsung board.
- "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board.
- "samsung,trats2" - for Exynos4412-based Tizen Reference board.
- "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board.
- "samsung,xyref5260" - for Exynos5260-based Samsung board.
- "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
- "samsung,sd5v1" - for Exynos5440-based Samsung board.
- "samsung,ssdk5440" - for Exynos5440-based Samsung board.
* Other companies Exynos SoC based
* FriendlyARM
- "friendlyarm,tiny4412" - for Exynos4412-based FriendlyARM
TINY4412 board.
* Google
- "google,pi" - for Exynos5800-based Google Peach Pi
Rev 10+ board,
also: "google,pi-rev16", "google,pi-rev15", "google,pi-rev14",
"google,pi-rev13", "google,pi-rev12", "google,pi-rev11",
"google,pi-rev10", "google,peach".
- "google,pit" - for Exynos5420-based Google Peach Pit
Rev 6+ (Exynos5420),
also: "google,pit-rev16", "google,pit-rev15", "google,pit-rev14",
"google,pit-rev13", "google,pit-rev12", "google,pit-rev11",
"google,pit-rev10", "google,pit-rev9", "google,pit-rev8",
"google,pit-rev7", "google,pit-rev6", "google,peach".
- "google,snow-rev4" - for Exynos5250-based Google Snow board,
also: "google,snow"
- "google,snow-rev5" - for Exynos5250-based Google Snow
Rev 5+ board.
- "google,spring" - for Exynos5250-based Google Spring board.
* Hardkernel
- "hardkernel,odroid-u3" - for Exynos4412-based Hardkernel Odroid U3.
- "hardkernel,odroid-x" - for Exynos4412-based Hardkernel Odroid X.
- "hardkernel,odroid-x2" - for Exynos4412-based Hardkernel Odroid X2.
- "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3.
- "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel
Odroid XU3 Lite board.
- "hardkernel,odroid-xu4" - for Exynos5422-based Hardkernel Odroid XU4.
* Insignal
- "insignal,arndale" - for Exynos5250-based Insignal Arndale board.
- "insignal,arndale-octa" - for Exynos5420-based Insignal Arndale
Octa board.
- "insignal,origen" - for Exynos4210-based Insignal Origen board.
- "insignal,origen4412 - for Exynos4412-based Insignal Origen board.
Optional nodes:
- firmware node, specifying presence and type of secure firmware:
- compatible: only "samsung,secure-firmware" is currently supported
- reg: address of non-secure SYSRAM used for communication with firmware
firmware@0203F000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};

View File

@ -55,3 +55,7 @@ Boards:
compatible = "renesas,lager", "renesas,r8a7790"
- Marzen
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)
compatible = "renesas,porter", "renesas,r8a7791"
- SILK (RTP0RC7794LCB00011S)
compatible = "renesas,silk", "renesas,r8a7794"

View File

@ -21,11 +21,14 @@ Example:
This is the memory-mapped registers for on board FPGA.
Required properities:
Required properties:
- compatible: should be a board-specific string followed by a string
indicating the type of FPGA. Example:
"fsl,<board>-fpga", "fsl,fpga-pixis"
"fsl,<board>-fpga", "fsl,fpga-pixis", or
"fsl,<board>-fpga", "fsl,fpga-qixis"
- reg: should contain the address and the length of the FPGA register set.
Optional properties:
- interrupt-parent: should specify phandle for the interrupt controller.
- interrupts: should specify event (wakeup) IRQ.
@ -38,6 +41,13 @@ Example (P1022DS):
interrupts = <8 8 0 0>;
};
Example (LS2080A-RDB):
cpld@3,0 {
compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis";
reg = <0x3 0 0x10000>;
};
* Freescale BCSR GPIO banks
Some BCSR registers act as simple GPIO controllers, each such

View File

@ -18,10 +18,14 @@ Required properties :
- #clock-cells : shall contain 1
- #reset-cells : shall contain 1
Optional properties :
- #power-domain-cells : shall contain 1
Example:
clock-controller@900000 {
compatible = "qcom,gcc-msm8960";
reg = <0x900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};

View File

@ -14,10 +14,14 @@ Required properties :
- #clock-cells : shall contain 1
- #reset-cells : shall contain 1
Optional properties :
- #power-domain-cells : shall contain 1
Example:
clock-controller@4000000 {
compatible = "qcom,mmcc-msm8960";
reg = <0x4000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};

View File

@ -1,9 +1,9 @@
* Freescale MPC512x/MPC8xxx GPIO controller
* Freescale MPC512x/MPC8xxx/Layerscape GPIO controller
Required properties:
- compatible : Should be "fsl,<soc>-gpio"
The following <soc>s are known to be supported:
mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq
mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq.
- reg : Address and length of the register set for the device
- interrupts : Should be the port interrupt shared by all 32 pins.
- #gpio-cells : Should be two. The first cell is the pin number and

View File

@ -3,10 +3,35 @@ Bindings for a fan connected to the PWM lines
Required properties:
- compatible : "pwm-fan"
- pwms : the PWM that is used to control the PWM fan
- cooling-levels : PWM duty cycle values in a range from 0 to 255
which correspond to thermal cooling states
Example:
pwm-fan {
fan0: pwm-fan {
compatible = "pwm-fan";
status = "okay";
cooling-min-state = <0>;
cooling-max-state = <3>;
#cooling-cells = <2>;
pwms = <&pwm 0 10000 0>;
cooling-levels = <0 102 170 230>;
};
thermal-zones {
cpu_thermal: cpu-thermal {
thermal-sensors = <&tmu 0>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu_alert1: cpu-alert1 {
temperature = <100000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert1>;
cooling-device = <&fan0 0 1>;
};
};
};

View File

@ -47,7 +47,7 @@ Required properties:
- clocks: Required if the System MMU is needed to gate its clock.
- power-domains: Required if the System MMU is needed to gate its power.
Please refer to the following document:
Documentation/devicetree/bindings/arm/exynos/power_domain.txt
Documentation/devicetree/bindings/power/pd-samsung.txt
Examples:
gsc_0: gsc@13e00000 {

View File

@ -22,6 +22,10 @@ Optional properties:
- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
down. When the system is suspended it will always go down thus triggerring
unwanted buck warm reset (setting buck voltages to default values).
- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
register to turn off the power. Usually the ACOKB is pulled up to VBATT so
when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
Optional nodes:
- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768

View File

@ -0,0 +1,10 @@
* ARM Juno R1 PCIe interface
This PCIe host controller is based on PLDA XpressRICH3-AXI IP
and thus inherits all the common properties defined in plda,xpressrich3-axi.txt
as well as the base properties defined in host-generic-pci.txt.
Required properties:
- compatible: "arm,juno-r1-pcie"
- dma-coherent: The host controller bridges the AXI transactions into PCIe bus
in a manner that makes the DMA operations to appear coherent to the CPUs.

View File

@ -0,0 +1,12 @@
* PLDA XpressRICH3-AXI host controller
The PLDA XpressRICH3-AXI host controller can be configured in a manner that
makes it compliant with the SBSA[1] standard published by ARM Ltd. For those
scenarios, the host-generic-pci.txt bindings apply with the following additions
to the compatible property:
Required properties:
- compatible: should contain "plda,xpressrich3-axi" to identify the IP used.
[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/

View File

@ -43,9 +43,8 @@ Example:
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
<&clock CLK_MOUT_USER_ACLK333>;
clock-names = "oscclk", "pclk0", "clk0";
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
clock-names = "oscclk", "clk0";
#power-domain-cells = <0>;
};

View File

@ -17,9 +17,9 @@ Required properties:
- reg: Address range of the SCPSYS unit
- infracfg: must contain a phandle to the infracfg controller
- clock, clock-names: clocks according to the common clock binding.
The clocks needed "mm" and "mfg". These are the
clocks which hardware needs to be enabled before
enabling certain power domains.
The clocks needed "mm", "mfg", "venc" and "venc_lt".
These are the clocks which hardware needs to be enabled
before enabling certain power domains.
Example:
@ -30,7 +30,9 @@ Example:
infracfg = <&infracfg>;
clocks = <&clk26m>,
<&topckgen CLK_TOP_MM_SEL>;
clock-names = "mfg", "mm";
<&topckgen CLK_TOP_VENC_SEL>,
<&topckgen CLK_TOP_VENC_LT_SEL>;
clock-names = "mfg", "mm", "venc", "venc_lt";
};
Example consumer:

View File

@ -0,0 +1,57 @@
Qualcomm Shared Memory Manager binding
This binding describes the Qualcomm Shared Memory Manager, used to share data
between various subsystems and OSes in Qualcomm platforms.
- compatible:
Usage: required
Value type: <stringlist>
Definition: must be:
"qcom,smem"
- memory-region:
Usage: required
Value type: <prop-encoded-array>
Definition: handle to memory reservation for main SMEM memory region.
- qcom,rpm-msg-ram:
Usage: required
Value type: <prop-encoded-array>
Definition: handle to RPM message memory resource
- hwlocks:
Usage: required
Value type: <prop-encoded-array>
Definition: reference to a hwspinlock used to protect allocations from
the shared memory
= EXAMPLE
The following example shows the SMEM setup for MSM8974, with a main SMEM region
at 0xfa00000 and the RPM message ram at 0xfc428000:
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
smem_region: smem@fa00000 {
reg = <0xfa00000 0x200000>;
no-map;
};
};
smem@fa00000 {
compatible = "qcom,smem";
memory-region = <&smem_region>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
hwlocks = <&tcsr_mutex 3>;
};
soc {
rpm_msg_ram: memory@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
};
};

View File

@ -3,10 +3,12 @@ Mediatek MT6577, MT6572 and MT6589 Timers
Required properties:
- compatible should contain:
* "mediatek,mt6589-timer" for MT6589 compatible timers
* "mediatek,mt6580-timer" for MT6580 compatible timers
* "mediatek,mt6577-timer" for all compatible timers (MT6589, MT6580,
MT6577)
* "mediatek,mt6589-timer" for MT6589 compatible timers
* "mediatek,mt8127-timer" for MT8127 compatible timers
* "mediatek,mt8135-timer" for MT8135 compatible timers
* "mediatek,mt8173-timer" for MT8173 compatible timers
* "mediatek,mt6577-timer" for MT6577 and all above compatible timers
- reg: Should contain location and length for timers register.
- clocks: Clocks driving the timer hardware. This list should include two
clocks. The order is system clock and as second clock the RTC clock.

View File

@ -1,6 +1,7 @@
synopsys DWC3 CORE
DWC3- USB3 CONTROLLER
DWC3- USB3 CONTROLLER. Complies to the generic USB binding properties
as described in 'usb/generic.txt'
Required properties:
- compatible: must be "snps,dwc3"

View File

@ -34,6 +34,7 @@ avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
axis Axis Communications AB
bosch Bosch Sensortec GmbH
boundary Boundary Devices Inc.
brcm Broadcom Corporation
buffalo Buffalo, Inc.
calxeda Calxeda
@ -171,6 +172,7 @@ pericom Pericom Technology Inc.
phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
plathome Plat'Home Co., Ltd.
plda PLDA
pixcir PIXCIR MICROELECTRONICS Co., Ltd
pulsedlight PulsedLight, Inc
powervr PowerVR (deprecated, use img)
@ -228,6 +230,7 @@ toradex Toradex AG
toshiba Toshiba Corporation
toumaz Toumaz
tplink TP-LINK Technologies Co., Ltd.
tronfy Tronfy
truly Truly Semiconductors Limited
upisemi uPI Semiconductor Corp.
usi Universal Scientific Industrial Co., Ltd.

View File

@ -789,6 +789,11 @@ S: Maintained
F: drivers/net/appletalk/
F: net/appletalk/
APPLIED MICRO (APM) X-GENE DEVICE TREE SUPPORT
M: Duc Dang <dhdang@apm.com>
S: Supported
F: arch/arm64/boot/dts/apm/
APPLIED MICRO (APM) X-GENE SOC ETHERNET DRIVER
M: Iyappan Subramanian <isubramanian@apm.com>
M: Keyur Chudgar <kchudgar@apm.com>
@ -1462,6 +1467,10 @@ F: drivers/*/*s3c2410*
F: drivers/*/*/*s3c2410*
F: drivers/spi/spi-s3c*
F: sound/soc/samsung/*
F: Documentation/arm/Samsung/
F: Documentation/devicetree/bindings/arm/samsung/
F: Documentation/devicetree/bindings/sram/samsung-sram.txt
F: Documentation/devicetree/bindings/power/pd-samsung.txt
N: exynos
ARM/SAMSUNG MOBILE MACHINE SUPPORT

View File

@ -58,7 +58,9 @@ dtb-$(CONFIG_ARCH_AXXIA) += \
axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-b.dtb \
bcm2835-rpi-b-plus.dtb
bcm2835-rpi-b-rev2.dtb \
bcm2835-rpi-b-plus.dtb \
bcm2835-rpi-a-plus.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
@ -72,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-buffalo-wzr-900dhp.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
@ -83,6 +86,8 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
bcm28155-ap.dtb \
bcm21664-garnet.dtb
dtb-$(CONFIG_ARCH_BCM_NSP) += \
bcm958625k.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2-sony-nsz-gs7.dtb \
berlin2cd-google-chromecast.dtb \
@ -115,6 +120,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5250-snow-rev5.dtb \
exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
exynos5410-smdk5410.dtb \
@ -123,6 +129,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5420-smdk5420.dtb \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
exynos5422-odroidxu4.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
@ -227,6 +234,9 @@ dtb-$(CONFIG_ARCH_MMP) += \
pxa168-aspenite.dtb \
pxa910-dkb.dtb \
mmp2-brownstone.dtb
dtb-$(CONFIG_MACH_MESON8B) += \
meson8b-mxq.dtb \
meson8b-odroidc1.dtb
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
dtb-$(CONFIG_SOC_IMX1) += \
@ -284,6 +294,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-gw551x.dtb \
imx6dl-gw552x.dtb \
imx6dl-hummingboard.dtb \
imx6dl-nit6xlite.dtb \
imx6dl-nitrogen6x.dtb \
imx6dl-phytec-pbab01.dtb \
imx6dl-rex-basic.dtb \
@ -313,6 +324,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-gw552x.dtb \
imx6q-hummingboard.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
@ -446,6 +458,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-base0033.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
am335x-bonegreen.dtb \
am335x-sl50.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
@ -470,6 +483,7 @@ dtb-$(CONFIG_SOC_AM43XX) += \
am437x-gp-evm.dtb
dtb-$(CONFIG_SOC_OMAP5) += \
omap5-cm-t54.dtb \
omap5-igep0050.dtb \
omap5-sbc-t54.dtb \
omap5-uevm.dtb
dtb-$(CONFIG_SOC_DRA7XX) += \
@ -506,7 +520,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
rk3288-firefly.dtb \
rk3288-popmetal.dtb \
rk3288-r89.dtb \
rk3288-rock2-square.dtb \
rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
rk3288-veyron-minnie.dtb \
rk3288-veyron-pinky.dtb \
@ -532,6 +549,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
r8a7791-porter.dtb \
r8a7793-gose.dtb \
r8a7794-alt.dtb \
r8a7794-silk.dtb \
@ -574,7 +592,9 @@ dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-gemei-g9.dtb \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
sun4i-a10-inet1.dtb \
sun4i-a10-inet97fv2.dtb \
sun4i-a10-inet9f-rev03.dtb \
sun4i-a10-itead-iteaduino-plus.dtb \
sun4i-a10-jesurun-q5.dtb \
sun4i-a10-marsboard.dtb \
@ -582,16 +602,23 @@ dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-mk802.dtb \
sun4i-a10-mk802ii.dtb \
sun4i-a10-olinuxino-lime.dtb \
sun4i-a10-pcduino.dtb
sun4i-a10-pcduino.dtb \
sun4i-a10-pcduino2.dtb \
sun4i-a10-pov-protab2-ips9.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
sun5i-a10s-auxtek-t003.dtb \
sun5i-a10s-auxtek-t004.dtb \
sun5i-a10s-mk802.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a10s-wobo-i5.dtb \
sun5i-a13-hsg-h702.dtb \
sun5i-a13-inet-98v-rev2.dtb \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
sun5i-a13-utoo-p66.dtb
sun5i-a13-q8-tablet.dtb \
sun5i-a13-utoo-p66.dtb \
sun5i-r8-chip.dtb
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
@ -599,7 +626,11 @@ dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-i7.dtb \
sun6i-a31-m9.dtb \
sun6i-a31-mele-a1000g-quad.dtb \
sun6i-a31s-cs908.dtb
sun6i-a31s-cs908.dtb \
sun6i-a31s-primo81.dtb \
sun6i-a31s-sina31s.dtb \
sun6i-a31s-sinovoip-bpi-m2.dtb \
sun6i-a31s-yones-toptech-bs1078-v2.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-bananapi.dtb \
sun7i-a20-bananapro.dtb \
@ -609,6 +640,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-i12-tvbox.dtb \
sun7i-a20-m3.dtb \
sun7i-a20-mk808c.dtb \
sun7i-a20-olimex-som-evb.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-micro.dtb \
@ -616,14 +648,18 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-orangepi-mini.dtb \
sun7i-a20-pcduino3.dtb \
sun7i-a20-pcduino3-nano.dtb \
sun7i-a20-wexler-tab7200.dtb
sun7i-a20-wexler-tab7200.dtb \
sun7i-a20-wits-pro-a20-dkt.dtb
dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a23-evb.dtb \
sun8i-a23-gt90h-v4.dtb \
sun8i-a23-ippo-q8h-v5.dtb \
sun8i-a23-ippo-q8h-v1.2.dtb \
sun8i-a23-q8-tablet.dtb \
sun8i-a33-et-q8-v1.6.dtb \
sun8i-a33-ga10h-v1.1.dtb \
sun8i-a33-ippo-q8h-v1.2.dtb \
sun8i-a33-q8-tablet.dtb \
sun8i-a33-sinlinx-sina33.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
@ -669,7 +705,9 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ph1-ld6b-ref.dtb \
uniphier-ph1-pro4-ref.dtb \
uniphier-ph1-sld3-ref.dtb \
uniphier-ph1-sld8-ref.dtb
uniphier-ph1-sld8-ref.dtb \
uniphier-proxstream2-gentil.dtb \
uniphier-proxstream2-vodka.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += \
versatile-ab.dtb \
versatile-pb.dtb
@ -699,6 +737,10 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-netgear-rn102.dtb \
armada-370-netgear-rn104.dtb \
armada-370-rd.dtb \
armada-370-seagate-nas-2bay.dtb \
armada-370-seagate-nas-4bay.dtb \
armada-370-seagate-personal-cloud.dtb \
armada-370-seagate-personal-cloud-2bay.dtb \
armada-370-synology-ds213j.dtb
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb

View File

@ -46,39 +46,39 @@
&am33xx_pinmux {
nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
pinctrl-single,pins = <
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
>;
};
nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
pinctrl-single,pins = <
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
>;
};
leds_base_pins: pinmux_leds_base_pins {
pinctrl-single,pins = <
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
>;
};
};

View File

@ -383,8 +383,7 @@
bus-width = <0x4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&aes {

View File

@ -0,0 +1,53 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
/ {
model = "TI AM335x BeagleBone Green";
compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
};
&ldo3_reg {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
&mmc1 {
vmmc-supply = <&vmmcsd_fixed>;
};
&mmc2 {
vmmc-supply = <&vmmcsd_fixed>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_pins>;
bus-width = <8>;
status = "okay";
};
&am33xx_pinmux {
uart2_pins: uart2_pins {
pinctrl-single,pins = <
0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
>;
};
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "okay";
};
&rtc {
system-power-controller;
};

View File

@ -737,7 +737,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&mmc3 {

View File

@ -647,7 +647,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&sham {

View File

@ -56,41 +56,41 @@
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
nandflash_pins: pinmux_nandflash_pins {
pinctrl-single,pins = <
0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
>;
};
};

View File

@ -29,8 +29,17 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vbat: fixedregulator@0 {
compatible = "regulator-fixed";
regulators {
compatible = "simple-bus";
vcc5v: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vcc5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
};
};
@ -233,14 +242,14 @@
#include "tps65910.dtsi"
&tps {
vcc1-supply = <&vbat>;
vcc2-supply = <&vbat>;
vcc3-supply = <&vbat>;
vcc4-supply = <&vbat>;
vcc5-supply = <&vbat>;
vcc6-supply = <&vbat>;
vcc7-supply = <&vbat>;
vccio-supply = <&vbat>;
vcc1-supply = <&vcc5v>;
vcc2-supply = <&vcc5v>;
vcc3-supply = <&vcc5v>;
vcc4-supply = <&vcc5v>;
vcc5-supply = <&vcc5v>;
vcc6-supply = <&vcc5v>;
vcc7-supply = <&vcc5v>;
vccio-supply = <&vcc5v>;
regulators {
vrtc_reg: regulator@0 {
@ -311,13 +320,6 @@
};
};
&vbat {
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
/* SPI Busses */
&am33xx_pinmux {
spi0_pins: pinmux_spi0 {

View File

@ -11,6 +11,17 @@
model = "Phytec AM335x phyBOARD-WEGA";
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
regulators {
compatible = "simple-bus";
vcc3v3: fixedregulator@1 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
};
};
/* CAN Busses */
@ -80,7 +91,7 @@
};
&mmc1 {
vmmc-supply = <&vmmc_reg>;
vmmc-supply = <&vcc3v3>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;

View File

@ -304,6 +304,13 @@
>;
};
dcan0_sleep: dcan0_sleep_pins {
pinctrl-single,pins = <
0x178 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
0x17c (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
>;
};
dcan1_default: dcan1_default_pins {
pinctrl-single,pins = <
0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
@ -311,6 +318,13 @@
>;
};
dcan1_sleep: dcan1_sleep_pins {
pinctrl-single,pins = <
0x180 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */
0x184 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */
>;
};
vpfe0_pins_default: vpfe0_pins_default {
pinctrl-single,pins = <
0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
@ -581,8 +595,17 @@
attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
/*
* 0x264 represents the offset of padconf register of
* gpio3_22 from am43xx_pinmux base.
*/
interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>,
<&am43xx_pinmux 0x264>;
interrupt-names = "tsc", "wakeup";
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
wakeup-source;
};
ov2659@30 {
@ -689,7 +712,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
/* eMMC sits on mmc2 */
@ -886,14 +909,16 @@
};
&dcan0 {
pinctrl-names = "default";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan0_default>;
pinctrl-1 = <&dcan0_sleep>;
status = "okay";
};
&dcan1 {
pinctrl-names = "default";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan1_default>;
pinctrl-1 = <&dcan1_sleep>;
status = "okay";
};

View File

@ -325,7 +325,7 @@
pinctrl-1 = <&mmc1_pins_sleep>;
vmmc-supply = <&v3_3d>;
bus-width = <4>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&qspi {

View File

@ -563,7 +563,7 @@
vmmc-supply = <&dcdc4>;
bus-width = <4>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&usb2_phy1 {

View File

@ -376,7 +376,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&mac {

View File

@ -35,6 +35,14 @@
regulator-max-microvolt = <3300000>;
};
aic_dvdd: fixedregulator-aic_dvdd {
compatible = "regulator-fixed";
regulator-name = "aic_dvdd_fixed";
vin-supply = <&vdd_3v3>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vtt_fixed: fixedregulator-vtt {
/* TPS51200 */
compatible = "regulator-fixed";
@ -142,6 +150,32 @@
};
};
};
sound0: sound@0 {
compatible = "simple-audio-card";
simple-audio-card,name = "BeagleBoard-X15";
simple-audio-card,widgets =
"Line", "Line Out",
"Line", "Line In";
simple-audio-card,routing =
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"MIC2L", "Line In",
"MIC2R", "Line In";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound0_master>;
simple-audio-card,frame-master = <&sound0_master>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp3>;
};
sound0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3104>;
clocks = <&clkout2_clk>;
};
};
};
&dra7_pmx_core {
@ -326,6 +360,36 @@
0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
>;
};
clkout2_pins_default: clkout2_pins_default {
pinctrl-single,pins = <
0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
>;
};
clkout2_pins_sleep: clkout2_pins_sleep {
pinctrl-single,pins = <
0x294 (PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
>;
};
mcasp3_pins_default: mcasp3_pins_default {
pinctrl-single,pins = <
0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
>;
};
mcasp3_pins_sleep: mcasp3_pins_sleep {
pinctrl-single,pins = <
0x324 (PIN_INPUT | MUX_MODE15)
0x328 (PIN_INPUT | MUX_MODE15)
0x32c (PIN_INPUT | MUX_MODE15)
0x330 (PIN_INPUT | MUX_MODE15)
>;
};
};
&i2c1 {
@ -511,6 +575,22 @@
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
};
tlv320aic3104: tlv320aic3104@18 {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3104";
reg = <0x18>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&clkout2_pins_default>;
pinctrl-1 = <&clkout2_pins_sleep>;
status = "okay";
adc-settle-ms = <40>;
AVDD-supply = <&vdd_3v3>;
IOVDD-supply = <&vdd_3v3>;
DRVDD-supply = <&vdd_3v3>;
DVDD-supply = <&aic_dvdd>;
};
};
&i2c3 {
@ -586,7 +666,7 @@
vmmc-supply = <&ldo1_reg>;
bus-width = <4>;
cd-gpios = <&gpio6 27 0>; /* gpio 219 */
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
};
&mmc2 {
@ -709,3 +789,38 @@
&pcie1 {
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
&mcasp3 {
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp3_pins_default>;
pinctrl-1 = <&mcasp3_pins_sleep>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializers */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
status = "okay";
};
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
status = "okay";
};
};
&mailbox6 {
status = "okay";
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
status = "okay";
};
mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
status = "okay";
};
};

View File

@ -74,7 +74,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
internal-regs {
serial@12000 {

View File

@ -69,7 +69,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";

View File

@ -61,7 +61,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
@ -138,6 +139,10 @@
phy-mode = "rgmii-id";
};
crypto@90000 {
status = "okay";
};
mvsdio@d4000 {
pinctrl-0 = <&sdio_pins3>;
pinctrl-names = "default";

View File

@ -63,7 +63,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
@ -82,6 +83,12 @@
};
internal-regs {
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
rtc@10300 {
status = "disabled";
};
serial@12000 {
status = "okay";
};

View File

@ -63,7 +63,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
@ -82,6 +83,12 @@
};
internal-regs {
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
rtc@10300 {
status = "disabled";
};
serial@12000 {
status = "okay";
};

View File

@ -74,7 +74,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";

View File

@ -0,0 +1,36 @@
/*
* Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
*
* Copyright (C) 2015 Seagate
*
* Author: Vincent Donnefort <vdonnefort@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/*
* Here are some information allowing to identify the device:
*
* Product name : Seagate NAS 2-Bay
* Code name (board/PCB) : Dart 2-Bay
* Model name (case sticker) : SRPD20
* Material desc (product spec) : STCTxxxxxxx
*/
/dts-v1/;
#include "armada-370-seagate-nas-xbay.dtsi"
/ {
model = "Seagate NAS 2-Bay (Dart, SRPD20)";
compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
gpio-fan {
gpio-fan,speed-map =
< 0 3
950 2
1400 1
1800 0>;
};
};

View File

@ -0,0 +1,133 @@
/*
* Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
*
* Copyright (C) 2015 Seagate
*
* Author: Vincent Donnefort <vdonnefort@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/*
* Here are some information allowing to identify the device:
*
* Product name : Seagate NAS 4-Bay
* Code name (board/PCB) : Dart 4-Bay
* Model name (case sticker) : SRPD40
* Material desc (product spec) : STCUxxxxxxx
*/
/dts-v1/;
#include "armada-370-seagate-nas-xbay.dtsi"
#include <dt-bindings/leds/leds-ns2.h>
/ {
model = "Seagate NAS 4-Bay (Dart, SRPD40)";
compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
soc {
pcie-controller {
/* SATA AHCI controller 88SE9170 */
pcie@1,0 {
status = "okay";
};
};
internal-regs {
mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
ethernet@74000 {
status = "okay";
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
i2c@11000 {
/* I2C GPIO expander (PCA9554A) */
pca9554: pca9554@21 {
compatible = "nxp,pca9554";
reg = <0x21>;
#gpio-cells = <2>;
gpio-controller;
};
};
};
};
regulators {
regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "SATA2 power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
};
regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "SATA3 power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
};
};
gpio-leds {
red-sata2 {
label = "dart:red:sata2";
gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
};
red-sata3 {
label = "dart:red:sata3";
gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
};
};
leds-ns2 {
compatible = "lacie,ns2-leds";
white-sata2 {
label = "dart:white:sata2";
cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
num-modes = <4>;
modes-map = <NS_V2_LED_SATA 0 0
NS_V2_LED_OFF 0 1
NS_V2_LED_ON 1 0
NS_V2_LED_ON 1 1>;
};
white-sata3 {
label = "dart:white:sata3";
cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
num-modes = <4>;
modes-map = <NS_V2_LED_SATA 0 0
NS_V2_LED_OFF 0 1
NS_V2_LED_ON 1 0
NS_V2_LED_ON 1 1>;
};
};
gpio-fan {
gpio-fan,speed-map =
< 0 3
800 2
1050 1
1300 0>;
};
};

View File

@ -0,0 +1,231 @@
/*
* Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
*
* Copyright (C) 2015 Seagate
*
* Author: Vincent Donnefort <vdonnefort@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/*
* TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
*/
#include "armada-370.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
pcie-controller {
status = "okay";
/* USB 3.0 bridge ASM1042A */
pcie@2,0 {
status = "okay";
};
};
internal-regs {
serial@12000 {
status = "okay";
};
sata@a0000 {
nr-ports = <2>;
status = "okay";
};
mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
ethernet@70000 {
status = "okay";
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
i2c@11000 {
status = "okay";
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
clock-frequency = <100000>;
/* RTC - NXP 8563T (second source) */
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
interrupts = <110>;
};
/* RTC - MCP7940NT */
rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
interrupts = <110>;
};
};
nand@d0000 {
status = "okay";
num-cs = <1>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partition@0 {
label = "u-boot";
reg = <0x0 0x300000>;
};
partition@300000 {
label = "device-tree";
reg = <0x300000 0x20000>;
};
partition@320000 {
label = "linux";
reg = <0x320000 0x2000000>;
};
partition@2320000 {
label = "rootfs";
reg = <0x2320000 0xdce0000>;
};
};
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA0 power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
};
regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "SATA1 power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
};
};
gpio-fan {
compatible = "gpio-fan";
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
&gpio2 1 GPIO_ACTIVE_HIGH>;
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
button@2 {
label = "Backup button";
linux,code = <KEY_OPTION>;
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
button@3 {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
};
gpio-leds {
compatible = "gpio-leds";
white-power {
label = "dart:white:power";
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
red-power {
label = "dart:red:power";
gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
};
red-sata0 {
label = "dart:red:sata0";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
red-sata1 {
label = "dart:red:sata1";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
};
};
&pinctrl {
pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
pinctrl-names = "default";
hdd0_led_sata_pin: hdd0-led-sata-pin {
marvell,pins = "mpp48";
marvell,function = "sata1";
};
hdd0_led_gpio_pin: hdd0-led-gpio-pin {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
hdd1_led_sata_pin: hdd1-led-sata-pin {
marvell,pins = "mpp57";
marvell,function = "sata0";
};
hdd1_led_gpio_pin: hdd1-led-gpio-pin {
marvell,pins = "mpp57";
marvell,function = "gpio";
};
};

View File

@ -0,0 +1,51 @@
/*
* Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
*
* Copyright (C) 2015 Seagate
*
* Author: Simon Guinot <simon.guinot@sequanux.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/*
* Here are some information allowing to identify the device:
*
* Product name : Seagate Personal Cloud 2-Bay
* Code name (board/PCB) : Cumulus Max
* Model name (case sticker) : SRN22C
* Material desc (product spec) : STCSxxxxxxx
*/
/dts-v1/;
#include "armada-370-seagate-personal-cloud.dtsi"
/ {
model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
soc {
internal-regs {
sata@a0000 {
status = "okay";
nr-ports = <2>;
};
};
};
regulators {
regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "SATA1 power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
};
};
};

View File

@ -0,0 +1,37 @@
/*
* Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC).
*
* Copyright (C) 2015 Seagate
*
* Author: Simon Guinot <simon.guinot@sequanux.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/*
* Here are some information allowing to identify the device:
*
* Product name : Seagate Personal Cloud
* Code name (board/PCB) : Cumulus
* Model name (case sticker) : SRN21C
* Material desc (product spec) : STCRxxxxxxx
*/
/dts-v1/;
#include "armada-370-seagate-personal-cloud.dtsi"
/ {
model = "Seagate Personal Cloud (Cumulus, SRN21C)";
compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
soc {
internal-regs {
sata@a0000 {
status = "okay";
nr-ports = <1>;
};
};
};
};

View File

@ -0,0 +1,178 @@
/*
* Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
* (Armada 370 SoC).
*
* Copyright (C) 2015 Seagate
*
* Author: Simon Guinot <simon.guinot@sequanux.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/*
* TODO: add support for the white SATA LED.
*/
#include "armada-370.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
pcie-controller {
status = "okay";
/* USB 3.0 Bridge ASM1042A */
pcie@1,0 {
status = "okay";
};
};
internal-regs {
coherency-fabric@20200 {
broken-idle;
};
serial@12000 {
status = "okay";
};
mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
ethernet@74000 {
status = "okay";
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
spi@10600 {
status = "okay";
pinctrl-0 = <&spi0_pins2>;
pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
/* MX25L8006E */
compatible = "mxicy,mx25l8005", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
};
};
};
usb@50000 {
status = "okay";
};
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
};
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA0 power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
debounce-interval = <100>;
};
button@2 {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
button@3 {
label = "USB VBUS error";
linux,code = <KEY_UNKNOWN>;
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
};
gpio-leds {
compatible = "gpio-leds";
red-sata0 {
label = "cumulus:red:sata0";
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
};
};
&pinctrl {
pinctrl-0 = <&sata_led_pin>;
pinctrl-names = "default";
sata_led_pin: sata-led-pin {
marvell,pins = "mpp60";
marvell,function = "sata0";
};
gpio_led_pin: gpio-led-pin {
marvell,pins = "mpp60";
marvell,function = "gpio";
};
};

View File

@ -77,7 +77,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
internal-regs {

View File

@ -256,6 +256,11 @@
reg = <0x20800 0x8>;
};
cpu-config@21000 {
compatible = "marvell,armada-370-cpu-config";
reg = <0x21000 0x8>;
};
audio_controller: audio-controller@30000 {
#sound-dai-cells = <1>;
compatible = "marvell,armada370-audio";
@ -319,6 +324,38 @@
ethernet@74000 {
compatible = "marvell,armada-370-neta";
};
crypto@90000 {
compatible = "marvell,armada-370-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
interrupts = <48>;
clocks = <&gateclk 23>;
clock-names = "cesa0";
marvell,crypto-srams = <&crypto_sram>;
marvell,crypto-sram-size = <0x7e0>;
};
};
crypto_sram: sa-sram {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
reg-names = "sram";
clocks = <&gateclk 23>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>;
/*
* The Armada 370 has an erratum preventing the use of
* the standard workflow for CPU idle support (relying
* on the BootROM code to enter/exit idle state).
* Reserve some amount of the crypto SRAM to put the
* cpuidle workaround.
*/
idle-sram@0 {
reg = <0x0 0x20>;
};
};
};
};

View File

@ -65,7 +65,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {

View File

@ -513,6 +513,21 @@
};
};
crypto@90000 {
compatible = "marvell,armada-375-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 30>, <&gateclk 31>,
<&gateclk 28>, <&gateclk 29>;
clock-names = "cesa0", "cesa1",
"cesaz0", "cesaz1";
marvell,crypto-srams = <&crypto_sram0>,
<&crypto_sram1>;
marvell,crypto-sram-size = <0x800>;
};
sata@a0000 {
compatible = "marvell,orion-sata";
reg = <0xa0000 0x5000>;
@ -619,5 +634,23 @@
};
};
crypto_sram0: sa-sram0 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
clocks = <&gateclk 30>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
};
crypto_sram1: sa-sram1 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
clocks = <&gateclk 31>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
};
};
};

View File

@ -59,7 +59,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi1: spi@10680 {

View File

@ -57,7 +57,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
internal-regs {

View File

@ -64,7 +64,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {

View File

@ -58,7 +58,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
@ -205,8 +207,21 @@
sdhci@d8000 {
pinctrl-names = "default";
pinctrl-0 = <&sdhci_pins>;
cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
no-1-8-v;
/*
* A388-GP board v1.5 and higher replace
* hitherto card detection method based on GPIO
* with the one using DAT3 pin. As they are
* incompatible, software-based polling is
* enabled with 'broken-cd' property. For boards
* older than v1.5 it can be replaced with:
* 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;',
* whereas for the newer ones following can be
* used instead:
* 'dat3-cd;'
* 'cd-inverted;'
*/
broken-cd;
wp-inverted;
bus-width = <8>;
status = "okay";

View File

@ -65,7 +65,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {

View File

@ -509,6 +509,21 @@
clocks = <&gateclk 4>;
};
crypto@90000 {
compatible = "marvell,armada-38x-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 23>, <&gateclk 21>,
<&gateclk 14>, <&gateclk 16>;
clock-names = "cesa0", "cesa1",
"cesaz0", "cesaz1";
marvell,crypto-srams = <&crypto_sram0>,
<&crypto_sram1>;
marvell,crypto-sram-size = <0x800>;
};
rtc@a3800 {
compatible = "marvell,armada-380-rtc";
reg = <0xa3800 0x20>, <0x184a0 0x0c>;
@ -584,6 +599,24 @@
status = "disabled";
};
};
crypto_sram0: sa-sram0 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
clocks = <&gateclk 23>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
};
crypto_sram1: sa-sram1 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
clocks = <&gateclk 21>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
};
};
clocks {

View File

@ -69,7 +69,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";

View File

@ -75,7 +75,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
devbus-bootcs {
status = "okay";

View File

@ -94,7 +94,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
devbus-bootcs {
status = "okay";

View File

@ -64,7 +64,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";

View File

@ -69,7 +69,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";

View File

@ -67,7 +67,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
internal-regs {
serial@12000 {

View File

@ -63,7 +63,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";
@ -88,41 +90,10 @@
};
internal-regs {
/* Two rear eSATA ports */
sata@a0000 {
nr-ports = <2>;
status = "okay";
};
serial@12000 {
status = "okay";
};
mdio {
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
reg = <1>;
};
};
ethernet@70000 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
/* Front USB 2.0 port */
usb@50000 {
status = "okay";
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
rtc@10300 {
status = "disabled";
};
i2c@11000 {
@ -130,12 +101,6 @@
clock-frequency = <400000>;
status = "okay";
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
isil,irq2-can-wakeup-machine;
};
/* Controller for rear fan #1 of 3 (Protechnic
* MGT4012XB-O20, 8000RPM) near eSATA port */
g762_fan1: g762@3e {
@ -172,6 +137,49 @@
compatible = "gmt,g751";
reg = <0x4c>;
};
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
isil,irq2-can-wakeup-machine;
};
};
serial@12000 {
status = "okay";
};
/* Front USB 2.0 port */
usb@50000 {
status = "okay";
};
mdio {
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
reg = <1>;
};
};
ethernet@70000 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
/* Two rear eSATA ports */
sata@a0000 {
nr-ports = <2>;
status = "okay";
};
nand@d0000 {

View File

@ -65,7 +65,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
devbus-bootcs {
status = "okay";

View File

@ -77,7 +77,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";

View File

@ -184,6 +184,11 @@
reg = <0x20800 0x20>;
};
cpu-config@21000 {
compatible = "marvell,armada-xp-cpu-config";
reg = <0x21000 0x8>;
};
eth2: ethernet@30000 {
compatible = "marvell,armada-xp-neta";
reg = <0x30000 0x4000>;
@ -236,6 +241,18 @@
compatible = "marvell,armada-xp-neta";
};
crypto@90000 {
compatible = "marvell,armada-xp-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
interrupts = <48>, <49>;
clocks = <&gateclk 23>, <&gateclk 23>;
clock-names = "cesa0", "cesa1";
marvell,crypto-srams = <&crypto_sram0>,
<&crypto_sram1>;
marvell,crypto-sram-size = <0x800>;
};
xor@f0900 {
compatible = "marvell,orion-xor";
reg = <0xF0900 0x100
@ -256,6 +273,24 @@
};
};
};
crypto_sram0: sa-sram0 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
clocks = <&gateclk 23>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
};
crypto_sram1: sa-sram1 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
clocks = <&gateclk 23>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
};
};
clocks {

View File

@ -44,6 +44,7 @@
*/
/dts-v1/;
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"
/ {
model = "Atmel SAMA5D2 Xplained";
@ -92,6 +93,8 @@
apb {
spi0: spi@f8000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_default>;
status = "okay";
m25p80@0 {
@ -102,25 +105,92 @@
};
macb0: ethernet@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
status = "okay";
};
uart1: serial@f8020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_default>;
status = "okay";
};
i2c0: i2c@f8028000 {
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0_default>;
status = "okay";
pmic: act8865@5b {
compatible = "active-semi,act8865";
reg = <0x5b>;
active-semi,vsel-high;
status = "okay";
regulators {
vdd_1v35_reg: DCDC_REG1 {
regulator-name = "VDD_1V35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
vdd_1v2_reg: DCDC_REG2 {
regulator-name = "VDD_1V2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
};
vdd_3v3_reg: DCDC_REG3 {
regulator-name = "VDD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_fuse_reg: LDO_REG1 {
regulator-name = "VDD_FUSE";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vdd_3v3_lp_reg: LDO_REG2 {
regulator-name = "VDD_3V3_LP";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_led_reg: LDO_REG3 {
regulator-name = "VDD_LED";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_sdhc_1v8_reg: LDO_REG4 {
regulator-name = "VDD_SDHC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
};
};
uart3: serial@fc008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_default>;
status = "okay";
};
i2c1: i2c@fc028000 {
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_default>;
status = "okay";
at24@54 {
@ -129,6 +199,54 @@
pagesize = <16>;
};
};
pinctrl@fc038000 {
pinctrl_i2c0_default: i2c0_default {
pinmux = <PIN_PD21__TWD0>,
<PIN_PD22__TWCK0>;
bias-disable;
};
pinctrl_i2c1_default: i2c1_default {
pinmux = <PIN_PD4__TWD1>,
<PIN_PD5__TWCK1>;
bias-disable;
};
pinctrl_macb0_default: macb0_default {
pinmux = <PIN_PB14__GTXCK>,
<PIN_PB15__GTXEN>,
<PIN_PB16__GRXDV>,
<PIN_PB17__GRXER>,
<PIN_PB18__GRX0>,
<PIN_PB19__GRX1>,
<PIN_PB20__GTX0>,
<PIN_PB21__GTX1>,
<PIN_PB22__GMDC>,
<PIN_PB23__GMDIO>;
bias-disable;
};
pinctrl_spi0_default: spi0_default {
pinmux = <PIN_PA14__SPI0_SPCK>,
<PIN_PA15__SPI0_MOSI>,
<PIN_PA16__SPI0_MISO>,
<PIN_PA17__SPI0_NPCS0>;
bias-disable;
};
pinctrl_uart1_default: uart1_default {
pinmux = <PIN_PD2__URXD1>,
<PIN_PD3__UTXD1>;
bias-disable;
};
pinctrl_uart3_default: uart3_default {
pinmux = <PIN_PB11__URXD3>,
<PIN_PB12__UTXD3>;
bias-disable;
};
};
};
};
};

View File

@ -76,7 +76,7 @@
pmic: act8865@5b {
compatible = "active-semi,act8865";
reg = <0x5b>;
status = "okay";
status = "disabled";
regulators {
vcc_1v8_reg: DCDC_REG1 {

View File

@ -246,7 +246,7 @@
d8 {
label = "d8";
gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
status = "disabled";
default-state = "on";
};
d10 {

View File

@ -148,6 +148,25 @@
clocks = <&pck2>;
clock-names = "mclk";
};
qt1070:keyboard@1b {
compatible = "qt1070";
reg = <0x1b>;
interrupt-parent = <&pioE>;
interrupts = <25 0x0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qt1070_irq>;
wakeup-source;
};
atmel_mxt_ts@4c {
compatible = "atmel,atmel_mxt_ts";
reg = <0x4c>;
interrupt-parent = <&pioE>;
interrupts = <24 0x0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mxt_ts>;
};
};
macb0: ethernet@f8020000 {
@ -204,6 +223,14 @@
atmel,pins =
<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
};
pinctrl_qt1070_irq: qt1070_irq {
atmel,pins =
<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
pinctrl_mxt_ts: mxt_irq {
atmel,pins =
<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
};
};
};

View File

@ -97,7 +97,7 @@
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
@ -426,7 +426,7 @@
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
clocks = <&ssc0_clk>;
clock-names = "pclk";
status = "disable";
status = "disabled";
};
ssc1: ssc@fffd4000 {
@ -437,7 +437,7 @@
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
clocks = <&ssc1_clk>;
clock-names = "pclk";
status = "disable";
status = "disabled";
};
ssc2: ssc@fffd8000 {
@ -448,7 +448,7 @@
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
clocks = <&ssc2_clk>;
clock-names = "pclk";
status = "disable";
status = "disabled";
};
macb0: ethernet@fffbc000 {

View File

@ -100,7 +100,7 @@
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9260-pmc";
compatible = "atmel,at91sam9260-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;

View File

@ -568,7 +568,7 @@
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;

View File

@ -93,7 +93,7 @@
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;

View File

@ -114,7 +114,7 @@
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9g45-pmc";
compatible = "atmel,at91sam9g45-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;

View File

@ -198,6 +198,8 @@
isi_0: endpoint {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
vsync-active = <1>;
hsync-active = <1>;
};
};
};

View File

@ -97,7 +97,7 @@
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9n12-pmc";
compatible = "atmel,at91sam9n12-pmc", "syscon";
reg = <0xfffffc00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;

View File

@ -71,10 +71,6 @@
};
};
i2c1: i2c@f8014000 {
status = "okay";
};
mmc0: mmc@f0008000 {
pinctrl-0 = <
&pinctrl_board_mmc0
@ -204,13 +200,13 @@
};
d9 {
label = "d6";
label = "d9";
gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk";
};
d10 {
label = "d7";
label = "d10";
gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};

View File

@ -814,7 +814,7 @@
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9g45-pmc";
compatible = "atmel,at91sam9g45-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;

View File

@ -68,7 +68,7 @@
adc_op_clk: adc_op_clk{
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <5000000>;
clock-frequency = <1000000>;
};
};
@ -105,7 +105,7 @@
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9x5-pmc";
compatible = "atmel,at91sam9x5-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
@ -1043,6 +1043,7 @@
atmel,adc-channels-used = <0xffff>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
atmel,adc-sample-hold-time = <11>;
atmel,adc-res = <8 10>;
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";

View File

@ -66,6 +66,8 @@
isi_0: endpoint@0 {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
vsync-active = <1>;
hsync-active = <1>;
};
};
};
@ -100,6 +102,12 @@
};
};
adc0: adc@f804c000 {
atmel,adc-ts-wires = <4>;
atmel,adc-ts-pressure-threshold = <10000>;
status = "okay";
};
pinctrl@fffff400 {
camera_sensor {
pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {

View File

@ -89,4 +89,9 @@
regulator-name = "ldo5";
};
};
usb_power_supply: usb_power_supply {
compatible = "x-powers,axp202-usb-power-supply";
status = "disabled";
};
};

View File

@ -0,0 +1,143 @@
/*
* Copyright 2015 Chen-Yu Tsai
*
* Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* AXP221/221s/223 Integrated Power Management Chip
* http://www.x-powers.com/product/AXP22X.php
* http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
*/
&axp22x {
interrupt-controller;
#interrupt-cells = <1>;
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <3000>;
reg_dcdc1: dcdc1 {
regulator-name = "dcdc1";
};
reg_dcdc2: dcdc2 {
regulator-name = "dcdc2";
};
reg_dcdc3: dcdc3 {
regulator-name = "dcdc3";
};
reg_dcdc4: dcdc4 {
regulator-name = "dcdc4";
};
reg_dcdc5: dcdc5 {
regulator-name = "dcdc5";
};
reg_dc1sw: dc1sw {
regulator-name = "dc1sw";
};
reg_dc5ldo: dc5ldo {
regulator-name = "dc5ldo";
};
reg_aldo1: aldo1 {
regulator-name = "aldo1";
};
reg_aldo2: aldo2 {
regulator-name = "aldo2";
};
reg_aldo3: aldo3 {
regulator-name = "aldo3";
};
reg_dldo1: dldo1 {
regulator-name = "dldo1";
};
reg_dldo2: dldo2 {
regulator-name = "dldo2";
};
reg_dldo3: dldo3 {
regulator-name = "dldo3";
};
reg_dldo4: dldo4 {
regulator-name = "dldo4";
};
reg_eldo1: eldo1 {
regulator-name = "eldo1";
};
reg_eldo2: eldo2 {
regulator-name = "eldo2";
};
reg_eldo3: eldo3 {
regulator-name = "eldo3";
};
reg_ldo_io0: ldo_io0 {
regulator-name = "ldo_io0";
};
reg_ldo_io1: ldo_io1 {
regulator-name = "ldo_io1";
};
reg_rtc_ldo: rtc_ldo {
/* RTC_LDO is a fixed, always-on regulator */
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "rtc_ldo";
};
};
};

View File

@ -32,6 +32,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/bcm-cygnus.h>
#include "skeleton.dtsi"
@ -54,197 +55,212 @@
/include/ "bcm-cygnus-clock.dtsi"
pinctrl: pinctrl@0x0301d0c8 {
compatible = "brcm,cygnus-pinmux";
reg = <0x0301d0c8 0x30>,
<0x0301d24c 0x2c>;
};
gpio_crmu: gpio@03024800 {
compatible = "brcm,cygnus-crmu-gpio";
reg = <0x03024800 0x50>,
<0x03024008 0x18>;
#gpio-cells = <2>;
gpio-controller;
};
gpio_ccm: gpio@1800a000 {
compatible = "brcm,cygnus-ccm-gpio";
reg = <0x1800a000 0x50>,
<0x0301d164 0x20>;
#gpio-cells = <2>;
gpio-controller;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
};
gpio_asiu: gpio@180a5000 {
compatible = "brcm,cygnus-asiu-gpio";
reg = <0x180a5000 0x668>;
#gpio-cells = <2>;
gpio-controller;
pinmux = <&pinctrl>;
interrupt-controller;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
};
amba {
core {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "arm,amba-bus", "simple-bus";
interrupt-parent = <&gic>;
ranges;
wdt@18009000 {
compatible = "arm,sp805" , "arm,primecell";
reg = <0x18009000 0x1000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-names = "apb_pclk";
timer@20200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
};
gic: interrupt-controller@21000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x21000 0x1000>,
<0x20100 0x100>;
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0x22000 0x1000>;
cache-unified;
cache-level = <2>;
};
};
i2c0: i2c@18008000 {
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
reg = <0x18008000 0x100>;
axi {
compatible = "simple-bus";
ranges;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
status = "disabled";
#size-cells = <1>;
pinctrl: pinctrl@0x0301d0c8 {
compatible = "brcm,cygnus-pinmux";
reg = <0x0301d0c8 0x30>,
<0x0301d24c 0x2c>;
};
gpio_crmu: gpio@03024800 {
compatible = "brcm,cygnus-crmu-gpio";
reg = <0x03024800 0x50>,
<0x03024008 0x18>;
#gpio-cells = <2>;
gpio-controller;
};
i2c0: i2c@18008000 {
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
reg = <0x18008000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
status = "disabled";
};
wdt0: wdt@18009000 {
compatible = "arm,sp805" , "arm,primecell";
reg = <0x18009000 0x1000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-names = "apb_pclk";
};
gpio_ccm: gpio@1800a000 {
compatible = "brcm,cygnus-ccm-gpio";
reg = <0x1800a000 0x50>,
<0x0301d164 0x20>;
#gpio-cells = <2>;
gpio-controller;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
};
i2c1: i2c@1800b000 {
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
reg = <0x1800b000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
status = "disabled";
};
pcie0: pcie@18012000 {
compatible = "brcm,iproc-pcie";
reg = <0x18012000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x28000000 0 0x00010000
0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
status = "disabled";
};
pcie1: pcie@18013000 {
compatible = "brcm,iproc-pcie";
reg = <0x18013000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x48000000 0 0x00010000
0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
status = "disabled";
};
uart0: serial@18020000 {
compatible = "snps,dw-apb-uart";
reg = <0x18020000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
uart1: serial@18021000 {
compatible = "snps,dw-apb-uart";
reg = <0x18021000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
uart2: serial@18022000 {
compatible = "snps,dw-apb-uart";
reg = <0x18020000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
uart3: serial@18023000 {
compatible = "snps,dw-apb-uart";
reg = <0x18023000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
nand: nand@18046000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x18046000 0x600>, <0xf8105408 0x600>,
<0x18046f00 0x20>;
reg-names = "nand", "iproc-idm", "iproc-ext";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
brcm,nand-has-wp;
};
gpio_asiu: gpio@180a5000 {
compatible = "brcm,cygnus-asiu-gpio";
reg = <0x180a5000 0x668>;
#gpio-cells = <2>;
gpio-controller;
pinmux = <&pinctrl>;
interrupt-controller;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
};
touchscreen: tsc@180a6000 {
compatible = "brcm,iproc-touchscreen";
reg = <0x180a6000 0x40>;
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
clock-names = "tsc_clk";
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
i2c1: i2c@1800b000 {
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
reg = <0x1800b000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
status = "disabled";
};
pcie0: pcie@18012000 {
compatible = "brcm,iproc-pcie";
reg = <0x18012000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x28000000 0 0x00010000
0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
status = "disabled";
};
pcie1: pcie@18013000 {
compatible = "brcm,iproc-pcie";
reg = <0x18013000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x48000000 0 0x00010000
0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
status = "disabled";
};
uart0: serial@18020000 {
compatible = "snps,dw-apb-uart";
reg = <0x18020000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
uart1: serial@18021000 {
compatible = "snps,dw-apb-uart";
reg = <0x18021000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
uart2: serial@18022000 {
compatible = "snps,dw-apb-uart";
reg = <0x18020000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
uart3: serial@18023000 {
compatible = "snps,dw-apb-uart";
reg = <0x18023000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
nand: nand@18046000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>;
reg-names = "nand", "iproc-idm", "iproc-ext";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
brcm,nand-has-wp;
};
gic: interrupt-controller@19021000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x19021000 0x1000>,
<0x19020100 0x100>;
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0x19022000 0x1000>;
cache-unified;
cache-level = <2>;
};
timer@19020200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x19020200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
};
};

View File

@ -0,0 +1,119 @@
/*
* BSD LICENSE
*
* Copyright(c) 2015 Broadcom Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "skeleton.dtsi"
/ {
compatible = "brcm,nsp";
model = "Broadcom Northstar Plus SoC";
interrupt-parent = <&gic>;
mpcore {
compatible = "simple-bus";
ranges = <0x00000000 0x19020000 0x00003000>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
};
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0x2000 0x1000>;
cache-unified;
cache-level = <2>;
};
gic: interrupt-controller@19021000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x1000 0x1000>,
<0x0100 0x100>;
};
timer@19020200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x0200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
periph_clk: periph_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <500000000>;
};
};
axi {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x00001000>;
#address-cells = <1>;
#size-cells = <1>;
uart0: serial@18000300 {
compatible = "ns16550a";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <62499840>;
status = "disabled";
};
uart1: serial@18000400 {
compatible = "ns16550a";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <62499840>;
status = "disabled";
};
};
};

View File

@ -0,0 +1,30 @@
/dts-v1/;
#include "bcm2835-rpi.dtsi"
/ {
compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
model = "Raspberry Pi Model A+";
leds {
act {
gpios = <&gpio 47 0>;
};
pwr {
label = "PWR";
gpios = <&gpio 35 0>;
default-state = "keep";
linux,default-trigger = "default-on";
};
};
};
&gpio {
pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
/* I2S interface */
i2s_alt0: i2s_alt0 {
brcm,pins = <18 19 20 21>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
};

View File

@ -0,0 +1,23 @@
/dts-v1/;
#include "bcm2835-rpi.dtsi"
/ {
compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
model = "Raspberry Pi Model B rev2";
leds {
act {
gpios = <&gpio 16 1>;
};
};
};
&gpio {
pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
/* I2S interface */
i2s_alt2: i2s_alt2 {
brcm,pins = <28 29 30 31>;
brcm,function = <BCM2835_FSEL_ALT2>;
};
};

View File

@ -13,11 +13,5 @@
};
&gpio {
pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
/* I2S interface */
i2s_alt2: i2s_alt2 {
brcm,pins = <28 29 30 31>;
brcm,function = <BCM2835_FSEL_ALT2>;
};
pinctrl-0 = <&gpioout &alt0 &alt3>;
};

View File

@ -52,6 +52,10 @@
clock-frequency = <100000>;
};
&i2c2 {
status = "okay";
};
&sdhci {
status = "okay";
bus-width = <4>;

View File

@ -1,4 +1,5 @@
#include <dt-bindings/pinctrl/bcm2835.h>
#include <dt-bindings/clock/bcm2835.h>
#include "skeleton.dtsi"
/ {
@ -21,6 +22,10 @@
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e003000 0x1000>;
interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
/* This could be a reference to BCM2835_CLOCK_TIMER,
* but we don't have the driver using the common clock
* support yet.
*/
clock-frequency = <1000000>;
};
@ -57,6 +62,17 @@
reg = <0x7e100000 0x28>;
};
clocks: cprman@7e101000 {
compatible = "brcm,bcm2835-cprman";
#clock-cells = <1>;
reg = <0x7e101000 0x2000>;
/* CPRMAN derives everything from the platform's
* oscillator.
*/
clocks = <&clk_osc>;
};
rng@7e104000 {
compatible = "brcm,bcm2835-rng";
reg = <0x7e104000 0x10>;
@ -92,11 +108,13 @@
#interrupt-cells = <2>;
};
uart@7e201000 {
uart0: uart@7e201000 {
compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
reg = <0x7e201000 0x1000>;
interrupts = <2 25>;
clock-frequency = <3000000>;
clocks = <&clocks BCM2835_CLOCK_UART>,
<&clocks BCM2835_CLOCK_VPU>;
clock-names = "uartclk", "apb_pclk";
arm,primecell-periphid = <0x00241011>;
};
@ -115,7 +133,7 @@
compatible = "brcm,bcm2835-spi";
reg = <0x7e204000 0x1000>;
interrupts = <2 22>;
clocks = <&clk_spi>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -125,7 +143,7 @@
compatible = "brcm,bcm2835-i2c";
reg = <0x7e205000 0x1000>;
interrupts = <2 21>;
clocks = <&clk_i2c>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -135,7 +153,7 @@
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
interrupts = <2 30>;
clocks = <&clk_mmc>;
clocks = <&clocks BCM2835_CLOCK_EMMC>;
status = "disabled";
};
@ -143,7 +161,17 @@
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
interrupts = <2 21>;
clocks = <&clk_i2c>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@7e805000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e805000 0x1000>;
interrupts = <2 21>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -165,28 +193,14 @@
#address-cells = <1>;
#size-cells = <0>;
clk_mmc: clock@0 {
/* The oscillator is the root of the clock tree. */
clk_osc: clock@3 {
compatible = "fixed-clock";
reg = <0>;
reg = <3>;
#clock-cells = <0>;
clock-output-names = "mmc";
clock-frequency = <100000000>;
clock-output-names = "osc";
clock-frequency = <19200000>;
};
clk_i2c: clock@1 {
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
clock-output-names = "i2c";
clock-frequency = <250000000>;
};
clk_spi: clock@2 {
compatible = "fixed-clock";
reg = <2>;
#clock-cells = <0>;
clock-output-names = "spi";
clock-frequency = <250000000>;
};
};
};

View File

@ -24,6 +24,17 @@
reg = <0x00000000 0x08000000>;
};
axi@18000000 {
usb3@23000 {
reg = <0x00023000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";

Some files were not shown because too many files have changed in this diff Show More