diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
index 4ca4b194e7d7..f41d76248550 100644
--- a/drivers/mtd/nand/onenand/onenand_base.c
+++ b/drivers/mtd/nand/onenand/onenand_base.c
@@ -2458,7 +2458,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
                 bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
 
         /* We write two bytes, so we don't have to mess with 16-bit access */
-        ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
+        ofs += mtd->oobsize + (this->badblockpos & ~0x01);
 	/* FIXME : What to do when marking SLC block in partition
 	 * 	   with MLC erasesize? For now, it is not advisable to
 	 *	   create partitions containing both SLC and MLC regions.
@@ -3967,6 +3967,9 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	if (!(this->options & ONENAND_SKIP_INITIAL_UNLOCKING))
 		this->unlock_all(mtd);
 
+	/* Set the bad block marker position */
+	this->badblockpos = ONENAND_BADBLOCK_POS;
+
 	ret = this->scan_bbt(mtd);
 	if ((!FLEXONENAND(this)) || ret)
 		return ret;
diff --git a/drivers/mtd/nand/onenand/onenand_bbt.c b/drivers/mtd/nand/onenand/onenand_bbt.c
index dde20487937d..57c31c81be18 100644
--- a/drivers/mtd/nand/onenand/onenand_bbt.c
+++ b/drivers/mtd/nand/onenand/onenand_bbt.c
@@ -190,9 +190,6 @@ static int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 	if (!bbm->bbt)
 		return -ENOMEM;
 
-	/* Set the bad block position */
-	bbm->badblockpos = ONENAND_BADBLOCK_POS;
-
 	/* Set erase shift */
 	bbm->bbt_erase_shift = this->erase_shift;
 
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 0aaa98b219a4..bfe9e10fae04 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -94,6 +94,7 @@ struct onenand_chip {
 	unsigned int		technology;
 	unsigned int		density_mask;
 	unsigned int		options;
+	unsigned int		badblockpos;
 
 	unsigned int		erase_shift;
 	unsigned int		page_shift;
@@ -188,6 +189,8 @@ struct onenand_chip {
 /* Check byte access in OneNAND */
 #define ONENAND_CHECK_BYTE_ACCESS(addr)		(addr & 0x1)
 
+#define ONENAND_BADBLOCK_POS		0
+
 /*
  * Options bits
  */