power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion
This patch removes the w1 slave driver that used to register the w1 family and instanciate a platform device at runtime. The code now lives in the supply driver instead to avoid that level of indirection. The old device name "ds2760-battery.0" is preserved, so userspace applications can access the same virtual device nodes as before. Note that because the w1 core does not currently have a framework for suspend/resume, the driver now registers a PM notifier callback. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This commit is contained in:
parent
fae68031f7
commit
bf49735537
|
@ -92,7 +92,7 @@ config BATTERY_CPCAP
|
|||
|
||||
config BATTERY_DS2760
|
||||
tristate "DS2760 battery driver (HP iPAQ & others)"
|
||||
depends on W1 && W1_SLAVE_DS2760
|
||||
depends on W1
|
||||
help
|
||||
Say Y here to enable support for batteries with ds2760 chip.
|
||||
|
||||
|
|
|
@ -27,9 +27,63 @@
|
|||
#include <linux/slab.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/power_supply.h>
|
||||
|
||||
#include <linux/suspend.h>
|
||||
#include <linux/w1.h>
|
||||
#include "../../w1/slaves/w1_ds2760.h"
|
||||
|
||||
static unsigned int cache_time = 1000;
|
||||
module_param(cache_time, uint, 0644);
|
||||
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
|
||||
|
||||
static bool pmod_enabled;
|
||||
module_param(pmod_enabled, bool, 0644);
|
||||
MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
|
||||
|
||||
static unsigned int rated_capacity;
|
||||
module_param(rated_capacity, uint, 0644);
|
||||
MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
|
||||
|
||||
static unsigned int current_accum;
|
||||
module_param(current_accum, uint, 0644);
|
||||
MODULE_PARM_DESC(current_accum, "current accumulator value");
|
||||
|
||||
#define W1_FAMILY_DS2760 0x30
|
||||
|
||||
/* Known commands to the DS2760 chip */
|
||||
#define W1_DS2760_SWAP 0xAA
|
||||
#define W1_DS2760_READ_DATA 0x69
|
||||
#define W1_DS2760_WRITE_DATA 0x6C
|
||||
#define W1_DS2760_COPY_DATA 0x48
|
||||
#define W1_DS2760_RECALL_DATA 0xB8
|
||||
#define W1_DS2760_LOCK 0x6A
|
||||
|
||||
/* Number of valid register addresses */
|
||||
#define DS2760_DATA_SIZE 0x40
|
||||
|
||||
#define DS2760_PROTECTION_REG 0x00
|
||||
|
||||
#define DS2760_STATUS_REG 0x01
|
||||
#define DS2760_STATUS_IE (1 << 2)
|
||||
#define DS2760_STATUS_SWEN (1 << 3)
|
||||
#define DS2760_STATUS_RNAOP (1 << 4)
|
||||
#define DS2760_STATUS_PMOD (1 << 5)
|
||||
|
||||
#define DS2760_EEPROM_REG 0x07
|
||||
#define DS2760_SPECIAL_FEATURE_REG 0x08
|
||||
#define DS2760_VOLTAGE_MSB 0x0c
|
||||
#define DS2760_VOLTAGE_LSB 0x0d
|
||||
#define DS2760_CURRENT_MSB 0x0e
|
||||
#define DS2760_CURRENT_LSB 0x0f
|
||||
#define DS2760_CURRENT_ACCUM_MSB 0x10
|
||||
#define DS2760_CURRENT_ACCUM_LSB 0x11
|
||||
#define DS2760_TEMP_MSB 0x18
|
||||
#define DS2760_TEMP_LSB 0x19
|
||||
#define DS2760_EEPROM_BLOCK0 0x20
|
||||
#define DS2760_ACTIVE_FULL 0x20
|
||||
#define DS2760_EEPROM_BLOCK1 0x30
|
||||
#define DS2760_STATUS_WRITE_REG 0x31
|
||||
#define DS2760_RATED_CAPACITY 0x32
|
||||
#define DS2760_CURRENT_OFFSET_BIAS 0x33
|
||||
#define DS2760_ACTIVE_EMPTY 0x3b
|
||||
|
||||
struct ds2760_device_info {
|
||||
struct device *dev;
|
||||
|
@ -55,28 +109,113 @@ struct ds2760_device_info {
|
|||
int full_counter;
|
||||
struct power_supply *bat;
|
||||
struct power_supply_desc bat_desc;
|
||||
struct device *w1_dev;
|
||||
struct workqueue_struct *monitor_wqueue;
|
||||
struct delayed_work monitor_work;
|
||||
struct delayed_work set_charged_work;
|
||||
struct notifier_block pm_notifier;
|
||||
};
|
||||
|
||||
static unsigned int cache_time = 1000;
|
||||
module_param(cache_time, uint, 0644);
|
||||
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
|
||||
static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
|
||||
int io)
|
||||
{
|
||||
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
|
||||
|
||||
static bool pmod_enabled;
|
||||
module_param(pmod_enabled, bool, 0644);
|
||||
MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
|
||||
if (!dev)
|
||||
return 0;
|
||||
|
||||
static unsigned int rated_capacity;
|
||||
module_param(rated_capacity, uint, 0644);
|
||||
MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
|
||||
mutex_lock(&sl->master->bus_mutex);
|
||||
|
||||
static unsigned int current_accum;
|
||||
module_param(current_accum, uint, 0644);
|
||||
MODULE_PARM_DESC(current_accum, "current accumulator value");
|
||||
if (addr > DS2760_DATA_SIZE || addr < 0) {
|
||||
count = 0;
|
||||
goto out;
|
||||
}
|
||||
if (addr + count > DS2760_DATA_SIZE)
|
||||
count = DS2760_DATA_SIZE - addr;
|
||||
|
||||
if (!w1_reset_select_slave(sl)) {
|
||||
if (!io) {
|
||||
w1_write_8(sl->master, W1_DS2760_READ_DATA);
|
||||
w1_write_8(sl->master, addr);
|
||||
count = w1_read_block(sl->master, buf, count);
|
||||
} else {
|
||||
w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
|
||||
w1_write_8(sl->master, addr);
|
||||
w1_write_block(sl->master, buf, count);
|
||||
/* XXX w1_write_block returns void, not n_written */
|
||||
}
|
||||
}
|
||||
|
||||
out:
|
||||
mutex_unlock(&sl->master->bus_mutex);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static int w1_ds2760_read(struct device *dev,
|
||||
char *buf, int addr,
|
||||
size_t count)
|
||||
{
|
||||
return w1_ds2760_io(dev, buf, addr, count, 0);
|
||||
}
|
||||
|
||||
static int w1_ds2760_write(struct device *dev,
|
||||
char *buf,
|
||||
int addr, size_t count)
|
||||
{
|
||||
return w1_ds2760_io(dev, buf, addr, count, 1);
|
||||
}
|
||||
|
||||
static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
|
||||
{
|
||||
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
|
||||
|
||||
if (!dev)
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&sl->master->bus_mutex);
|
||||
|
||||
if (w1_reset_select_slave(sl) == 0) {
|
||||
w1_write_8(sl->master, cmd);
|
||||
w1_write_8(sl->master, addr);
|
||||
}
|
||||
|
||||
mutex_unlock(&sl->master->bus_mutex);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int w1_ds2760_store_eeprom(struct device *dev, int addr)
|
||||
{
|
||||
return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
|
||||
}
|
||||
|
||||
static int w1_ds2760_recall_eeprom(struct device *dev, int addr)
|
||||
{
|
||||
return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
|
||||
}
|
||||
|
||||
static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
|
||||
struct bin_attribute *bin_attr, char *buf,
|
||||
loff_t off, size_t count)
|
||||
{
|
||||
struct device *dev = container_of(kobj, struct device, kobj);
|
||||
return w1_ds2760_read(dev, buf, off, count);
|
||||
}
|
||||
|
||||
static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
|
||||
|
||||
static struct bin_attribute *w1_ds2760_bin_attrs[] = {
|
||||
&bin_attr_w1_slave,
|
||||
NULL,
|
||||
};
|
||||
|
||||
static const struct attribute_group w1_ds2760_group = {
|
||||
.bin_attrs = w1_ds2760_bin_attrs,
|
||||
};
|
||||
|
||||
static const struct attribute_group *w1_ds2760_groups[] = {
|
||||
&w1_ds2760_group,
|
||||
NULL,
|
||||
};
|
||||
/* Some batteries have their rated capacity stored a N * 10 mAh, while
|
||||
* others use an index into this table. */
|
||||
static int rated_capacities[] = {
|
||||
|
@ -138,10 +277,10 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
|
|||
count = DS2760_TEMP_LSB - start + 1;
|
||||
}
|
||||
|
||||
ret = w1_ds2760_read(di->w1_dev, di->raw + start, start, count);
|
||||
ret = w1_ds2760_read(di->dev, di->raw + start, start, count);
|
||||
if (ret != count) {
|
||||
dev_warn(di->dev, "call to w1_ds2760_read failed (0x%p)\n",
|
||||
di->w1_dev);
|
||||
di->dev);
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
@ -242,7 +381,7 @@ static void ds2760_battery_set_current_accum(struct ds2760_device_info *di,
|
|||
acr[0] = acr_val >> 8;
|
||||
acr[1] = acr_val & 0xff;
|
||||
|
||||
if (w1_ds2760_write(di->w1_dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
|
||||
if (w1_ds2760_write(di->dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
|
||||
dev_warn(di->dev, "ACR write failed\n");
|
||||
}
|
||||
|
||||
|
@ -297,9 +436,9 @@ static void ds2760_battery_write_status(struct ds2760_device_info *di,
|
|||
if (status == di->raw[DS2760_STATUS_REG])
|
||||
return;
|
||||
|
||||
w1_ds2760_write(di->w1_dev, &status, DS2760_STATUS_WRITE_REG, 1);
|
||||
w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
|
||||
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
|
||||
w1_ds2760_write(di->dev, &status, DS2760_STATUS_WRITE_REG, 1);
|
||||
w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
|
||||
w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
|
||||
}
|
||||
|
||||
static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
|
||||
|
@ -308,9 +447,9 @@ static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
|
|||
if (rated_capacity == di->raw[DS2760_RATED_CAPACITY])
|
||||
return;
|
||||
|
||||
w1_ds2760_write(di->w1_dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
|
||||
w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
|
||||
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
|
||||
w1_ds2760_write(di->dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
|
||||
w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
|
||||
w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
|
||||
}
|
||||
|
||||
static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
|
||||
|
@ -325,9 +464,9 @@ static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
|
|||
tmp[1] == di->raw[DS2760_ACTIVE_FULL + 1])
|
||||
return;
|
||||
|
||||
w1_ds2760_write(di->w1_dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
|
||||
w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0);
|
||||
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0);
|
||||
w1_ds2760_write(di->dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
|
||||
w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
|
||||
w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
|
||||
|
||||
/* Write to the di->raw[] buffer directly - the DS2760_ACTIVE_FULL
|
||||
* values won't be read back by ds2760_battery_read_status() */
|
||||
|
@ -383,9 +522,9 @@ static void ds2760_battery_set_charged_work(struct work_struct *work)
|
|||
|
||||
dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias);
|
||||
|
||||
w1_ds2760_write(di->w1_dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
|
||||
w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
|
||||
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
|
||||
w1_ds2760_write(di->dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
|
||||
w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
|
||||
w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
|
||||
|
||||
/* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS
|
||||
* value won't be read back by ds2760_battery_read_status() */
|
||||
|
@ -504,24 +643,55 @@ static enum power_supply_property ds2760_battery_props[] = {
|
|||
POWER_SUPPLY_PROP_CAPACITY,
|
||||
};
|
||||
|
||||
static int ds2760_battery_probe(struct platform_device *pdev)
|
||||
static int ds2760_pm_notifier(struct notifier_block *notifier,
|
||||
unsigned long pm_event,
|
||||
void *unused)
|
||||
{
|
||||
struct ds2760_device_info *di =
|
||||
container_of(notifier, struct ds2760_device_info, pm_notifier);
|
||||
|
||||
switch (pm_event) {
|
||||
case PM_HIBERNATION_PREPARE:
|
||||
case PM_SUSPEND_PREPARE:
|
||||
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
|
||||
break;
|
||||
|
||||
case PM_POST_RESTORE:
|
||||
case PM_POST_HIBERNATION:
|
||||
case PM_POST_SUSPEND:
|
||||
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
|
||||
power_supply_changed(di->bat);
|
||||
mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
|
||||
|
||||
break;
|
||||
|
||||
case PM_RESTORE_PREPARE:
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return NOTIFY_DONE;
|
||||
}
|
||||
|
||||
static int w1_ds2760_add_slave(struct w1_slave *sl)
|
||||
{
|
||||
struct power_supply_config psy_cfg = {};
|
||||
char status;
|
||||
int retval = 0;
|
||||
struct ds2760_device_info *di;
|
||||
struct device *dev = &sl->dev;
|
||||
int retval = 0;
|
||||
char name[32];
|
||||
char status;
|
||||
|
||||
di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
|
||||
di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
|
||||
if (!di) {
|
||||
retval = -ENOMEM;
|
||||
goto di_alloc_failed;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, di);
|
||||
snprintf(name, sizeof(name), "ds2760-battery.%d", dev->id);
|
||||
|
||||
di->dev = &pdev->dev;
|
||||
di->w1_dev = pdev->dev.parent;
|
||||
di->bat_desc.name = dev_name(&pdev->dev);
|
||||
di->dev = dev;
|
||||
di->bat_desc.name = name;
|
||||
di->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
|
||||
di->bat_desc.properties = ds2760_battery_props;
|
||||
di->bat_desc.num_properties = ARRAY_SIZE(ds2760_battery_props);
|
||||
|
@ -533,10 +703,12 @@ static int ds2760_battery_probe(struct platform_device *pdev)
|
|||
di->bat_desc.external_power_changed =
|
||||
ds2760_battery_external_power_changed;
|
||||
|
||||
psy_cfg.drv_data = di;
|
||||
psy_cfg.drv_data = di;
|
||||
|
||||
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
|
||||
|
||||
sl->family_data = di;
|
||||
|
||||
/* enable sleep mode feature */
|
||||
ds2760_battery_read_status(di);
|
||||
status = di->raw[DS2760_STATUS_REG];
|
||||
|
@ -556,7 +728,7 @@ static int ds2760_battery_probe(struct platform_device *pdev)
|
|||
if (current_accum)
|
||||
ds2760_battery_set_current_accum(di, current_accum);
|
||||
|
||||
di->bat = power_supply_register(&pdev->dev, &di->bat_desc, &psy_cfg);
|
||||
di->bat = power_supply_register(dev, &di->bat_desc, &psy_cfg);
|
||||
if (IS_ERR(di->bat)) {
|
||||
dev_err(di->dev, "failed to register battery\n");
|
||||
retval = PTR_ERR(di->bat);
|
||||
|
@ -566,14 +738,16 @@ static int ds2760_battery_probe(struct platform_device *pdev)
|
|||
INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
|
||||
INIT_DELAYED_WORK(&di->set_charged_work,
|
||||
ds2760_battery_set_charged_work);
|
||||
di->monitor_wqueue = alloc_ordered_workqueue(dev_name(&pdev->dev),
|
||||
WQ_MEM_RECLAIM);
|
||||
di->monitor_wqueue = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
|
||||
if (!di->monitor_wqueue) {
|
||||
retval = -ESRCH;
|
||||
goto workqueue_failed;
|
||||
}
|
||||
queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ * 1);
|
||||
|
||||
di->pm_notifier.notifier_call = ds2760_pm_notifier;
|
||||
register_pm_notifier(&di->pm_notifier);
|
||||
|
||||
goto success;
|
||||
|
||||
workqueue_failed:
|
||||
|
@ -584,65 +758,32 @@ success:
|
|||
return retval;
|
||||
}
|
||||
|
||||
static int ds2760_battery_remove(struct platform_device *pdev)
|
||||
static void w1_ds2760_remove_slave(struct w1_slave *sl)
|
||||
{
|
||||
struct ds2760_device_info *di = platform_get_drvdata(pdev);
|
||||
struct ds2760_device_info *di = sl->family_data;
|
||||
|
||||
unregister_pm_notifier(&di->pm_notifier);
|
||||
cancel_delayed_work_sync(&di->monitor_work);
|
||||
cancel_delayed_work_sync(&di->set_charged_work);
|
||||
destroy_workqueue(di->monitor_wqueue);
|
||||
power_supply_unregister(di->bat);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
|
||||
static int ds2760_battery_suspend(struct platform_device *pdev,
|
||||
pm_message_t state)
|
||||
{
|
||||
struct ds2760_device_info *di = platform_get_drvdata(pdev);
|
||||
|
||||
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ds2760_battery_resume(struct platform_device *pdev)
|
||||
{
|
||||
struct ds2760_device_info *di = platform_get_drvdata(pdev);
|
||||
|
||||
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
|
||||
power_supply_changed(di->bat);
|
||||
|
||||
mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
#define ds2760_battery_suspend NULL
|
||||
#define ds2760_battery_resume NULL
|
||||
|
||||
#endif /* CONFIG_PM */
|
||||
|
||||
MODULE_ALIAS("platform:ds2760-battery");
|
||||
|
||||
static struct platform_driver ds2760_battery_driver = {
|
||||
.driver = {
|
||||
.name = "ds2760-battery",
|
||||
},
|
||||
.probe = ds2760_battery_probe,
|
||||
.remove = ds2760_battery_remove,
|
||||
.suspend = ds2760_battery_suspend,
|
||||
.resume = ds2760_battery_resume,
|
||||
static struct w1_family_ops w1_ds2760_fops = {
|
||||
.add_slave = w1_ds2760_add_slave,
|
||||
.remove_slave = w1_ds2760_remove_slave,
|
||||
.groups = w1_ds2760_groups,
|
||||
};
|
||||
|
||||
module_platform_driver(ds2760_battery_driver);
|
||||
static struct w1_family w1_ds2760_family = {
|
||||
.fid = W1_FAMILY_DS2760,
|
||||
.fops = &w1_ds2760_fops,
|
||||
};
|
||||
module_w1_family(w1_ds2760_family);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, "
|
||||
"Matt Reimer <mreimer@vpop.net>, "
|
||||
"Anton Vorontsov <cbou@mail.ru>");
|
||||
MODULE_DESCRIPTION("ds2760 battery driver");
|
||||
MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));
|
||||
|
|
|
@ -100,18 +100,6 @@ config W1_SLAVE_DS2438
|
|||
Say Y here if you want to use a 1-wire
|
||||
DS2438 Smart Battery Monitor device support
|
||||
|
||||
config W1_SLAVE_DS2760
|
||||
tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
|
||||
help
|
||||
If you enable this you will have the DS2760 battery monitor
|
||||
chip support.
|
||||
|
||||
The battery monitor chip is used in many batteries/devices
|
||||
as the one who is responsible for charging/discharging/monitoring
|
||||
Li+ batteries.
|
||||
|
||||
If you are unsure, say N.
|
||||
|
||||
config W1_SLAVE_DS2780
|
||||
tristate "Dallas 2780 battery monitor chip"
|
||||
help
|
||||
|
|
|
@ -14,7 +14,6 @@ obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
|
|||
obj-$(CONFIG_W1_SLAVE_DS2805) += w1_ds2805.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2438) += w1_ds2438.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o
|
||||
|
|
|
@ -1,175 +0,0 @@
|
|||
/*
|
||||
* 1-Wire implementation for the ds2760 chip
|
||||
*
|
||||
* Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
|
||||
*
|
||||
* Use consistent with the GNU GPL is permitted,
|
||||
* provided that this copyright notice is
|
||||
* preserved in its entirety in all copies and derived works.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/idr.h>
|
||||
#include <linux/gfp.h>
|
||||
|
||||
#include <linux/w1.h>
|
||||
|
||||
#include "w1_ds2760.h"
|
||||
|
||||
#define W1_FAMILY_DS2760 0x30
|
||||
|
||||
static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
|
||||
int io)
|
||||
{
|
||||
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
|
||||
|
||||
if (!dev)
|
||||
return 0;
|
||||
|
||||
mutex_lock(&sl->master->bus_mutex);
|
||||
|
||||
if (addr > DS2760_DATA_SIZE || addr < 0) {
|
||||
count = 0;
|
||||
goto out;
|
||||
}
|
||||
if (addr + count > DS2760_DATA_SIZE)
|
||||
count = DS2760_DATA_SIZE - addr;
|
||||
|
||||
if (!w1_reset_select_slave(sl)) {
|
||||
if (!io) {
|
||||
w1_write_8(sl->master, W1_DS2760_READ_DATA);
|
||||
w1_write_8(sl->master, addr);
|
||||
count = w1_read_block(sl->master, buf, count);
|
||||
} else {
|
||||
w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
|
||||
w1_write_8(sl->master, addr);
|
||||
w1_write_block(sl->master, buf, count);
|
||||
/* XXX w1_write_block returns void, not n_written */
|
||||
}
|
||||
}
|
||||
|
||||
out:
|
||||
mutex_unlock(&sl->master->bus_mutex);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count)
|
||||
{
|
||||
return w1_ds2760_io(dev, buf, addr, count, 0);
|
||||
}
|
||||
EXPORT_SYMBOL(w1_ds2760_read);
|
||||
|
||||
int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)
|
||||
{
|
||||
return w1_ds2760_io(dev, buf, addr, count, 1);
|
||||
}
|
||||
EXPORT_SYMBOL(w1_ds2760_write);
|
||||
|
||||
static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
|
||||
{
|
||||
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
|
||||
|
||||
if (!dev)
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&sl->master->bus_mutex);
|
||||
|
||||
if (w1_reset_select_slave(sl) == 0) {
|
||||
w1_write_8(sl->master, cmd);
|
||||
w1_write_8(sl->master, addr);
|
||||
}
|
||||
|
||||
mutex_unlock(&sl->master->bus_mutex);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int w1_ds2760_store_eeprom(struct device *dev, int addr)
|
||||
{
|
||||
return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
|
||||
}
|
||||
EXPORT_SYMBOL(w1_ds2760_store_eeprom);
|
||||
|
||||
int w1_ds2760_recall_eeprom(struct device *dev, int addr)
|
||||
{
|
||||
return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
|
||||
}
|
||||
EXPORT_SYMBOL(w1_ds2760_recall_eeprom);
|
||||
|
||||
static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
|
||||
struct bin_attribute *bin_attr, char *buf,
|
||||
loff_t off, size_t count)
|
||||
{
|
||||
struct device *dev = container_of(kobj, struct device, kobj);
|
||||
return w1_ds2760_read(dev, buf, off, count);
|
||||
}
|
||||
|
||||
static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
|
||||
|
||||
static struct bin_attribute *w1_ds2760_bin_attrs[] = {
|
||||
&bin_attr_w1_slave,
|
||||
NULL,
|
||||
};
|
||||
|
||||
static const struct attribute_group w1_ds2760_group = {
|
||||
.bin_attrs = w1_ds2760_bin_attrs,
|
||||
};
|
||||
|
||||
static const struct attribute_group *w1_ds2760_groups[] = {
|
||||
&w1_ds2760_group,
|
||||
NULL,
|
||||
};
|
||||
|
||||
static int w1_ds2760_add_slave(struct w1_slave *sl)
|
||||
{
|
||||
int ret;
|
||||
struct platform_device *pdev;
|
||||
|
||||
pdev = platform_device_alloc("ds2760-battery", PLATFORM_DEVID_AUTO);
|
||||
if (!pdev)
|
||||
return -ENOMEM;
|
||||
pdev->dev.parent = &sl->dev;
|
||||
|
||||
ret = platform_device_add(pdev);
|
||||
if (ret)
|
||||
goto pdev_add_failed;
|
||||
|
||||
dev_set_drvdata(&sl->dev, pdev);
|
||||
|
||||
return 0;
|
||||
|
||||
pdev_add_failed:
|
||||
platform_device_put(pdev);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void w1_ds2760_remove_slave(struct w1_slave *sl)
|
||||
{
|
||||
struct platform_device *pdev = dev_get_drvdata(&sl->dev);
|
||||
|
||||
platform_device_unregister(pdev);
|
||||
}
|
||||
|
||||
static struct w1_family_ops w1_ds2760_fops = {
|
||||
.add_slave = w1_ds2760_add_slave,
|
||||
.remove_slave = w1_ds2760_remove_slave,
|
||||
.groups = w1_ds2760_groups,
|
||||
};
|
||||
|
||||
static struct w1_family w1_ds2760_family = {
|
||||
.fid = W1_FAMILY_DS2760,
|
||||
.fops = &w1_ds2760_fops,
|
||||
};
|
||||
module_w1_family(w1_ds2760_family);
|
||||
|
||||
MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>");
|
||||
MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));
|
|
@ -1,59 +0,0 @@
|
|||
/*
|
||||
* 1-Wire implementation for the ds2760 chip
|
||||
*
|
||||
* Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
|
||||
*
|
||||
* Use consistent with the GNU GPL is permitted,
|
||||
* provided that this copyright notice is
|
||||
* preserved in its entirety in all copies and derived works.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __w1_ds2760_h__
|
||||
#define __w1_ds2760_h__
|
||||
|
||||
/* Known commands to the DS2760 chip */
|
||||
#define W1_DS2760_SWAP 0xAA
|
||||
#define W1_DS2760_READ_DATA 0x69
|
||||
#define W1_DS2760_WRITE_DATA 0x6C
|
||||
#define W1_DS2760_COPY_DATA 0x48
|
||||
#define W1_DS2760_RECALL_DATA 0xB8
|
||||
#define W1_DS2760_LOCK 0x6A
|
||||
|
||||
/* Number of valid register addresses */
|
||||
#define DS2760_DATA_SIZE 0x40
|
||||
|
||||
#define DS2760_PROTECTION_REG 0x00
|
||||
|
||||
#define DS2760_STATUS_REG 0x01
|
||||
#define DS2760_STATUS_IE (1 << 2)
|
||||
#define DS2760_STATUS_SWEN (1 << 3)
|
||||
#define DS2760_STATUS_RNAOP (1 << 4)
|
||||
#define DS2760_STATUS_PMOD (1 << 5)
|
||||
|
||||
#define DS2760_EEPROM_REG 0x07
|
||||
#define DS2760_SPECIAL_FEATURE_REG 0x08
|
||||
#define DS2760_VOLTAGE_MSB 0x0c
|
||||
#define DS2760_VOLTAGE_LSB 0x0d
|
||||
#define DS2760_CURRENT_MSB 0x0e
|
||||
#define DS2760_CURRENT_LSB 0x0f
|
||||
#define DS2760_CURRENT_ACCUM_MSB 0x10
|
||||
#define DS2760_CURRENT_ACCUM_LSB 0x11
|
||||
#define DS2760_TEMP_MSB 0x18
|
||||
#define DS2760_TEMP_LSB 0x19
|
||||
#define DS2760_EEPROM_BLOCK0 0x20
|
||||
#define DS2760_ACTIVE_FULL 0x20
|
||||
#define DS2760_EEPROM_BLOCK1 0x30
|
||||
#define DS2760_STATUS_WRITE_REG 0x31
|
||||
#define DS2760_RATED_CAPACITY 0x32
|
||||
#define DS2760_CURRENT_OFFSET_BIAS 0x33
|
||||
#define DS2760_ACTIVE_EMPTY 0x3b
|
||||
|
||||
extern int w1_ds2760_read(struct device *dev, char *buf, int addr,
|
||||
size_t count);
|
||||
extern int w1_ds2760_write(struct device *dev, char *buf, int addr,
|
||||
size_t count);
|
||||
extern int w1_ds2760_store_eeprom(struct device *dev, int addr);
|
||||
extern int w1_ds2760_recall_eeprom(struct device *dev, int addr);
|
||||
|
||||
#endif /* !__w1_ds2760_h__ */
|
Loading…
Reference in New Issue