arm64: allwinner: a64: Add initial NanoPi A64 support
NanoPi A64 is a new board of high performance with low cost designed by FriendlyElec., using the Allwinner A64 SOC. Nanopi A64 features - Allwinner A64, 64-bit Quad-core Cortex-A53@648MHz to 1.152GHz, DVFS - 1GB DDR3 RAM - MicroSD - Gigabit Ethernet (RTL8211E) - Wi-Fi 802.11b/g/n - IR receiver - Audio In/Out - Video In/Out - Serial Debug Port - microUSB 5V 2A DC power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
This commit is contained in:
parent
3bc1de8c75
commit
bf39721453
|
@ -1,4 +1,5 @@
|
|||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
|
||||
|
|
|
@ -0,0 +1,207 @@
|
|||
/*
|
||||
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sun50i-a64.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "FriendlyARM NanoPi A64";
|
||||
compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* i2c1 connected with gpio headers like pine64, bananapi */
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2c1_pins {
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins>;
|
||||
vmmc-supply = <®_dcdc1>;
|
||||
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
|
||||
cd-inverted;
|
||||
disable-wp;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&r_rsb {
|
||||
status = "okay";
|
||||
|
||||
axp803: pmic@3a3 {
|
||||
compatible = "x-powers,axp803";
|
||||
reg = <0x3a3>;
|
||||
interrupt-parent = <&r_intc>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
#include "axp803.dtsi"
|
||||
|
||||
®_aldo2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-pl";
|
||||
};
|
||||
|
||||
®_aldo3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc-pll-avcc";
|
||||
};
|
||||
|
||||
®_dcdc1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc-3v";
|
||||
};
|
||||
|
||||
®_dcdc2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1040000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-name = "vdd-cpux";
|
||||
};
|
||||
|
||||
/* DCDC3 is polyphased with DCDC2 */
|
||||
|
||||
®_dcdc5 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vcc-dram";
|
||||
};
|
||||
|
||||
®_dcdc6 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-name = "vdd-sys";
|
||||
};
|
||||
|
||||
®_dldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-hdmi-dsi";
|
||||
};
|
||||
|
||||
®_dldo4 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc-pg-wifi-io";
|
||||
};
|
||||
|
||||
®_eldo1 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "cpvdd";
|
||||
};
|
||||
|
||||
®_fldo1 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "vcc-1v2-hsic";
|
||||
};
|
||||
|
||||
/*
|
||||
* The A64 chip cannot work without this regulator off, although
|
||||
* it seems to be only driving the AR100 core.
|
||||
* Maybe we don't still know well about CPUs domain.
|
||||
*/
|
||||
®_fldo2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-name = "vdd-cpus";
|
||||
};
|
||||
|
||||
®_rtc_ldo {
|
||||
regulator-name = "vcc-rtc";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
Loading…
Reference in New Issue