Merge branch '4.14-fixes' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 "More MIPS fixes for 4.14:

   - Loongson 1: Set the default number of RX and TX queues to
     accomodate for recent changes of stmmac driver.

   - BPF: Fix uninitialised target compiler error.

   - Fix cmpxchg on 32 bit signed ints for 64 bit kernels with
     !kernel_uses_llsc

   - Fix generic-board-config.sh for builds using O=

   - Remove pr_err() calls from fpu_emu() for a case which is not a
     kernel error"

* '4.14-fixes' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: math-emu: Remove pr_err() calls from fpu_emu()
  MIPS: Fix generic-board-config.sh for builds using O=
  MIPS: Fix cmpxchg on 32b signed ints for 64b kernel with !kernel_uses_llsc
  MIPS: loongson1: set default number of rx and tx queues for stmmac
  MIPS: bpf: Fix uninitialised target compiler error

arch/mips/include/asm/cmpxchg.h

@@ -155,14 +155,16 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 		return __cmpxchg_small(ptr, old, new, size);
 
 	case 4:
-		return __cmpxchg_asm("ll", "sc", (volatile u32 *)ptr, old, new);
+		return __cmpxchg_asm("ll", "sc", (volatile u32 *)ptr,
+				     (u32)old, new);
 
 	case 8:
 		/* lld/scd are only available for MIPS64 */
 		if (!IS_ENABLED(CONFIG_64BIT))
 			return __cmpxchg_called_with_bad_pointer();
 
-		return __cmpxchg_asm("lld", "scd", (volatile u64 *)ptr, old, new);
+		return __cmpxchg_asm("lld", "scd", (volatile u64 *)ptr,
+				     (u64)old, new);
 
 	default:
 		return __cmpxchg_called_with_bad_pointer();

arch/mips/loongson32/common/platform.c

@@ -194,6 +194,8 @@ static struct plat_stmmacenet_data ls1x_eth0_pdata = {
 	.dma_cfg		= &ls1x_eth_dma_cfg,
 	.has_gmac		= 1,
 	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
 	.init			= ls1x_eth_mux_init,
 };
 
@@ -229,6 +231,8 @@ static struct plat_stmmacenet_data ls1x_eth1_pdata = {
 	.dma_cfg		= &ls1x_eth_dma_cfg,
 	.has_gmac		= 1,
 	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
 	.init			= ls1x_eth_mux_init,
 };
 

arch/mips/math-emu/cp1emu.c

@@ -2558,7 +2558,6 @@ dcopuop:
 					break;
 				default:
 					/* Reserved R6 ops */
-					pr_err("Reserved MIPS R6 CMP.condn.S operation\n");
 					return SIGILL;
 				}
 			}
@@ -2719,7 +2718,6 @@ dcopuop:
 					break;
 				default:
 					/* Reserved R6 ops */
-					pr_err("Reserved MIPS R6 CMP.condn.D operation\n");
 					return SIGILL;
 				}
 			}

arch/mips/net/ebpf_jit.c

@@ -667,7 +667,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 {
 	int src, dst, r, td, ts, mem_off, b_off;
 	bool need_swap, did_move, cmp_eq;
-	unsigned int target;
+	unsigned int target = 0;
 	u64 t64;
 	s64 t64s;
 	int bpf_op = BPF_OP(insn->code);

arch/mips/tools/generic-board-config.sh

@@ -30,8 +30,6 @@ cfg="$4"
 boards_origin="$5"
 shift 5
 
-cd "${srctree}"
-
 # Only print Skipping... lines if the user explicitly specified BOARDS=. In the
 # general case it only serves to obscure the useful output about what actually
 # was included.
@@ -48,7 +46,7 @@ environment*)
 esac
 
 for board in $@; do
-	board_cfg="arch/mips/configs/generic/board-${board}.config"
+	board_cfg="${srctree}/arch/mips/configs/generic/board-${board}.config"
 	if [ ! -f "${board_cfg}" ]; then
 		echo "WARNING: Board config '${board_cfg}' not found"
 		continue
@@ -84,7 +82,7 @@ for board in $@; do
 	done || continue
 
 	# Merge this board config fragment into our final config file
-	./scripts/kconfig/merge_config.sh \
+	${srctree}/scripts/kconfig/merge_config.sh \
 		-m -O ${objtree} ${cfg} ${board_cfg} \
 		| grep -Ev '^(#|Using)'
 done