rt2x00: Remove usage of deprecated radio_enabled & IEEE80211_CONF_CHANGE_RADIO_ENABLED

In the config() callback function the fields radio_enabled and
the change flag IEEE80211_CONF_CHANGE_RADIO_ENABLED have been
deprecated. This removes the usage of those fields by improving
antenna change detection in the antenna configuration function.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Ivo van Doorn 2009-08-08 23:53:04 +02:00 committed by John W. Linville
parent 4d30d309a3
commit bdfa500b8b
4 changed files with 50 additions and 45 deletions

View File

@ -124,8 +124,9 @@ enum antenna rt2x00lib_config_antenna_check(enum antenna current_ant,
}
void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
struct antenna_setup ant)
struct antenna_setup config)
{
struct link_ant *ant = &rt2x00dev->link.ant;
struct antenna_setup *def = &rt2x00dev->default_ant;
struct antenna_setup *active = &rt2x00dev->link.ant.active;
@ -134,14 +135,23 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
* ANTENNA_SW_DIVERSITY state to the driver.
* If that happens, fallback to hardware defaults,
* or our own default.
* If diversity handling is active for a particular antenna,
* we shouldn't overwrite that antenna.
* The calls to rt2x00lib_config_antenna_check()
* might have caused that we restore back to the already
* active setting. If that has happened we can quit.
*/
ant.rx = rt2x00lib_config_antenna_check(ant.rx, def->rx);
ant.tx = rt2x00lib_config_antenna_check(ant.tx, def->tx);
if (!(ant->flags & ANTENNA_RX_DIVERSITY))
config.rx = rt2x00lib_config_antenna_check(config.rx, def->rx);
else
config.rx = active->rx;
if (ant.rx == active->rx && ant.tx == active->tx)
if (!(ant->flags & ANTENNA_TX_DIVERSITY))
config.tx = rt2x00lib_config_antenna_check(config.tx, def->tx);
else
config.tx = active->tx;
if (config.rx == active->rx && config.tx == active->tx)
return;
/*
@ -156,11 +166,11 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
* The latter is required since we need to recalibrate the
* noise-sensitivity ratio for the new setup.
*/
rt2x00dev->ops->lib->config_ant(rt2x00dev, &ant);
rt2x00dev->ops->lib->config_ant(rt2x00dev, &config);
rt2x00link_reset_tuner(rt2x00dev, true);
memcpy(active, &ant, sizeof(ant));
memcpy(active, &config, sizeof(config));
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);

View File

@ -785,6 +785,13 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
rt2x00dev->intf_sta_count = 0;
rt2x00dev->intf_associated = 0;
/* Enable the radio */
retval = rt2x00lib_enable_radio(rt2x00dev);
if (retval) {
rt2x00queue_uninitialize(rt2x00dev);
return retval;
}
set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
return 0;

View File

@ -219,6 +219,7 @@ static void rt2x00lib_antenna_diversity_eval(struct rt2x00_dev *rt2x00dev)
static void rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev)
{
struct link_ant *ant = &rt2x00dev->link.ant;
unsigned int flags = ant->flags;
/*
* Determine if software diversity is enabled for
@ -226,13 +227,13 @@ static void rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev)
* Always perform this check since within the link
* tuner interval the configuration might have changed.
*/
ant->flags &= ~ANTENNA_RX_DIVERSITY;
ant->flags &= ~ANTENNA_TX_DIVERSITY;
flags &= ~ANTENNA_RX_DIVERSITY;
flags &= ~ANTENNA_TX_DIVERSITY;
if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
ant->flags |= ANTENNA_RX_DIVERSITY;
flags |= ANTENNA_RX_DIVERSITY;
if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
ant->flags |= ANTENNA_TX_DIVERSITY;
flags |= ANTENNA_TX_DIVERSITY;
if (!(ant->flags & ANTENNA_RX_DIVERSITY) &&
!(ant->flags & ANTENNA_TX_DIVERSITY)) {
@ -240,6 +241,9 @@ static void rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev)
return;
}
/* Update flags */
ant->flags = flags;
/*
* If we have only sampled the data over the last period
* we should now harvest the data. Otherwise just evaluate

View File

@ -338,7 +338,6 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
int status;
/*
* mac80211 might be calling this function while we are trying
@ -348,44 +347,29 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
return 0;
/*
* Only change device state when the radio is enabled. It does not
* matter what parameters we have configured when the radio is disabled
* because we won't be able to send or receive anyway. Also note that
* some configuration parameters (e.g. channel and antenna values) can
* only be set when the radio is enabled.
* Some configuration parameters (e.g. channel and antenna values) can
* only be set when the radio is enabled, but do require the RX to
* be off.
*/
if (conf->radio_enabled) {
/* For programming the values, we have to turn RX off */
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
/* Enable the radio */
status = rt2x00lib_enable_radio(rt2x00dev);
if (unlikely(status))
return status;
/*
* When we've just turned on the radio, we want to reprogram
* everything to ensure a consistent state
*/
rt2x00lib_config(rt2x00dev, conf, changed);
/*
* When we've just turned on the radio, we want to reprogram
* everything to ensure a consistent state
*/
rt2x00lib_config(rt2x00dev, conf, changed);
/*
* After the radio has been enabled we need to configure
* the antenna to the default settings. rt2x00lib_config_antenna()
* should determine if any action should be taken based on
* checking if diversity has been enabled or no antenna changes
* have been made since the last configuration change.
*/
rt2x00lib_config_antenna(rt2x00dev, rt2x00dev->default_ant);
/*
* The radio was enabled, configure the antenna to the
* default settings, the link tuner will later start
* continue configuring the antenna based on the software
* diversity. But for non-diversity configurations, we need
* to have configured the correct state now.
*/
if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED)
rt2x00lib_config_antenna(rt2x00dev,
rt2x00dev->default_ant);
/* Turn RX back on */
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
} else {
/* Disable the radio */
rt2x00lib_disable_radio(rt2x00dev);
}
/* Turn RX back on */
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
return 0;
}