Third round of iio fixes for the 3.16 cycle.
* Lots of hid sensors component drivers had a bug due to a local variable whose name suggested it was returned from the read_raw function not infact being returned (ret vs ret_type). Fixed and unused ret removed. * Block a possible race condition in tcs3472 by locking around some dependant i2c messages. * Fix bug in the am335x driver fifo setup that occurs if the final channel enabled takes certain values. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJTvFSjAAoJEFSFNJnE9BaI+vAP/RKcPm9BiTV84cQDvMnxt5ks 9Om08nBAobg/nv2K55yq6A6NslXiIQaSI8dLbGtPHfy2U1rGVnr1eDVFnjPZOfVN Jvg+RF6LZPoNrr5G4NxFFsRbs2wnWLWnPrJ45vJ9KzYzolV2iVHOTrxnZE5Z2Ry0 dhm5B5sT2OzdPfloV+VeAtzfgqZs/A3aopRMrQ02v+xAI3IXiRa3A1axgpFjvw7u ZAeubLw2+FVFJFcSAheop/3FKp0LLxTJ7a88IvdtZ7cb/8rSUrIOLlIQ+Al1QoaU lOnxd8la6tpr9IWkpy3ahb6KZHtlhjg1fofCrk+DiMyGD9iudLan0CQCywttesUK ClA/nn9mYCdfE/9woNJjs8uGM1jIiKohrT8PZbPwWGk81T4kD3YzeonGSmFypWiX sAuoz9l/Gvfy2tLhhiwvCu15tW9ttBkKor2s49Q/uuLWjfFAsJCZXTWLBVDLxzqh BFtrLn4WLNm51NPqVaP4UwvSSPGQaNYr6mqnWQckMpjeS8sATezvH2I+frtqKqld 8SiklAr2piBFj3edGXsTBji4XdsmDhX0oUPVTBuVv13GykC/2Q9I3v3aMTTEKcET CFswo3fTwYYSiTpvGh+JcmDeSEpPIOuxxv5gKpI/Pz4R9wbUPfa9dGw+ddA4GsKs vQqwzzoinkR/0vJOetSI =6qkW -----END PGP SIGNATURE----- Merge tag 'iio-fixes-for-3.16c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Third round of iio fixes for the 3.16 cycle. * Lots of hid sensors component drivers had a bug due to a local variable whose name suggested it was returned from the read_raw function not infact being returned (ret vs ret_type). Fixed and unused ret removed. * Block a possible race condition in tcs3472 by locking around some dependant i2c messages. * Fix bug in the am335x driver fifo setup that occurs if the final channel enabled takes certain values.
This commit is contained in:
commit
bdac8ca90e
|
@ -110,7 +110,6 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
|
|||
struct accel_3d_state *accel_state = iio_priv(indio_dev);
|
||||
int report_id = -1;
|
||||
u32 address;
|
||||
int ret;
|
||||
int ret_type;
|
||||
s32 poll_value;
|
||||
|
||||
|
@ -151,14 +150,12 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
|
|||
ret_type = IIO_VAL_INT;
|
||||
break;
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
ret = hid_sensor_read_samp_freq_value(
|
||||
ret_type = hid_sensor_read_samp_freq_value(
|
||||
&accel_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
case IIO_CHAN_INFO_HYSTERESIS:
|
||||
ret = hid_sensor_read_raw_hyst_value(
|
||||
ret_type = hid_sensor_read_raw_hyst_value(
|
||||
&accel_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
default:
|
||||
ret_type = -EINVAL;
|
||||
|
|
|
@ -374,7 +374,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
|
|||
return -EAGAIN;
|
||||
}
|
||||
}
|
||||
map_val = chan->channel + TOTAL_CHANNELS;
|
||||
map_val = adc_dev->channel_step[chan->scan_index];
|
||||
|
||||
/*
|
||||
* We check the complete FIFO. We programmed just one entry but in case
|
||||
|
|
|
@ -110,7 +110,6 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
|
|||
struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
|
||||
int report_id = -1;
|
||||
u32 address;
|
||||
int ret;
|
||||
int ret_type;
|
||||
s32 poll_value;
|
||||
|
||||
|
@ -151,14 +150,12 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
|
|||
ret_type = IIO_VAL_INT;
|
||||
break;
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
ret = hid_sensor_read_samp_freq_value(
|
||||
ret_type = hid_sensor_read_samp_freq_value(
|
||||
&gyro_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
case IIO_CHAN_INFO_HYSTERESIS:
|
||||
ret = hid_sensor_read_raw_hyst_value(
|
||||
ret_type = hid_sensor_read_raw_hyst_value(
|
||||
&gyro_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
default:
|
||||
ret_type = -EINVAL;
|
||||
|
|
|
@ -79,7 +79,6 @@ static int als_read_raw(struct iio_dev *indio_dev,
|
|||
struct als_state *als_state = iio_priv(indio_dev);
|
||||
int report_id = -1;
|
||||
u32 address;
|
||||
int ret;
|
||||
int ret_type;
|
||||
s32 poll_value;
|
||||
|
||||
|
@ -129,14 +128,12 @@ static int als_read_raw(struct iio_dev *indio_dev,
|
|||
ret_type = IIO_VAL_INT;
|
||||
break;
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
ret = hid_sensor_read_samp_freq_value(
|
||||
ret_type = hid_sensor_read_samp_freq_value(
|
||||
&als_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
case IIO_CHAN_INFO_HYSTERESIS:
|
||||
ret = hid_sensor_read_raw_hyst_value(
|
||||
ret_type = hid_sensor_read_raw_hyst_value(
|
||||
&als_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
default:
|
||||
ret_type = -EINVAL;
|
||||
|
|
|
@ -74,7 +74,6 @@ static int prox_read_raw(struct iio_dev *indio_dev,
|
|||
struct prox_state *prox_state = iio_priv(indio_dev);
|
||||
int report_id = -1;
|
||||
u32 address;
|
||||
int ret;
|
||||
int ret_type;
|
||||
s32 poll_value;
|
||||
|
||||
|
@ -125,14 +124,12 @@ static int prox_read_raw(struct iio_dev *indio_dev,
|
|||
ret_type = IIO_VAL_INT;
|
||||
break;
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
ret = hid_sensor_read_samp_freq_value(
|
||||
ret_type = hid_sensor_read_samp_freq_value(
|
||||
&prox_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
case IIO_CHAN_INFO_HYSTERESIS:
|
||||
ret = hid_sensor_read_raw_hyst_value(
|
||||
ret_type = hid_sensor_read_raw_hyst_value(
|
||||
&prox_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
default:
|
||||
ret_type = -EINVAL;
|
||||
|
|
|
@ -52,6 +52,7 @@
|
|||
|
||||
struct tcs3472_data {
|
||||
struct i2c_client *client;
|
||||
struct mutex lock;
|
||||
u8 enable;
|
||||
u8 control;
|
||||
u8 atime;
|
||||
|
@ -116,10 +117,17 @@ static int tcs3472_read_raw(struct iio_dev *indio_dev,
|
|||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
if (iio_buffer_enabled(indio_dev))
|
||||
return -EBUSY;
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
ret = tcs3472_req_data(data);
|
||||
if (ret < 0)
|
||||
if (ret < 0) {
|
||||
mutex_unlock(&data->lock);
|
||||
return ret;
|
||||
}
|
||||
ret = i2c_smbus_read_word_data(data->client, chan->address);
|
||||
mutex_unlock(&data->lock);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*val = ret;
|
||||
|
@ -255,6 +263,7 @@ static int tcs3472_probe(struct i2c_client *client,
|
|||
data = iio_priv(indio_dev);
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
data->client = client;
|
||||
mutex_init(&data->lock);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->info = &tcs3472_info;
|
||||
|
|
|
@ -110,7 +110,6 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
|
|||
struct magn_3d_state *magn_state = iio_priv(indio_dev);
|
||||
int report_id = -1;
|
||||
u32 address;
|
||||
int ret;
|
||||
int ret_type;
|
||||
s32 poll_value;
|
||||
|
||||
|
@ -153,14 +152,12 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
|
|||
ret_type = IIO_VAL_INT;
|
||||
break;
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
ret = hid_sensor_read_samp_freq_value(
|
||||
ret_type = hid_sensor_read_samp_freq_value(
|
||||
&magn_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
case IIO_CHAN_INFO_HYSTERESIS:
|
||||
ret = hid_sensor_read_raw_hyst_value(
|
||||
ret_type = hid_sensor_read_raw_hyst_value(
|
||||
&magn_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
default:
|
||||
ret_type = -EINVAL;
|
||||
|
|
|
@ -78,7 +78,6 @@ static int press_read_raw(struct iio_dev *indio_dev,
|
|||
struct press_state *press_state = iio_priv(indio_dev);
|
||||
int report_id = -1;
|
||||
u32 address;
|
||||
int ret;
|
||||
int ret_type;
|
||||
s32 poll_value;
|
||||
|
||||
|
@ -128,14 +127,12 @@ static int press_read_raw(struct iio_dev *indio_dev,
|
|||
ret_type = IIO_VAL_INT;
|
||||
break;
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
ret = hid_sensor_read_samp_freq_value(
|
||||
ret_type = hid_sensor_read_samp_freq_value(
|
||||
&press_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
case IIO_CHAN_INFO_HYSTERESIS:
|
||||
ret = hid_sensor_read_raw_hyst_value(
|
||||
ret_type = hid_sensor_read_raw_hyst_value(
|
||||
&press_state->common_attributes, val, val2);
|
||||
ret_type = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
default:
|
||||
ret_type = -EINVAL;
|
||||
|
|
Loading…
Reference in New Issue