ARM: dts: omap5-uevm: update optional/unused regulator configurations

commit e00c27ef3b
(ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes)
introduced regulator entries for OMAP5uEVM.

However, The regulator information is based on an older temporary
pre-production board variant and does not reflect production board
750-2628-XXX boards.

The following optional/unused regulators can be updated:

- SMPS9 supplies TWL6040 over VDDA_2v1_AUD. This regulator needs to be
enabled only when audio is active. Since it does not come active by
default, it does not require "always-on" or "boot-on".

- LDO2 and LDO8 do not go to any peripheral or connector on the board.
Further, these unused regulators should have been 2.8V for LDO2 and
3.0V for LDO8. Mark these LDOs as disabled in the dts until needed.

Reported-by: Marc Jüttner <m-juettner@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: J Keerthy <j-keerthy@ti.com>
Acked-by: Benoit Cousson <benoit.cousson@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Nishanth Menon 2013-07-29 12:03:03 -05:00 committed by Tony Lindgren
parent e18235a62a
commit bd3c5544a1
1 changed files with 8 additions and 9 deletions

View File

@ -331,8 +331,6 @@
regulator-name = "smps9"; regulator-name = "smps9";
regulator-min-microvolt = <2100000>; regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>; regulator-max-microvolt = <2100000>;
regulator-always-on;
regulator-boot-on;
ti,smps-range = <0x80>; ti,smps-range = <0x80>;
}; };
@ -355,10 +353,10 @@
ldo2_reg: ldo2 { ldo2_reg: ldo2 {
/* VCC_2V8_DISP: Does not go anywhere */ /* VCC_2V8_DISP: Does not go anywhere */
regulator-name = "ldo2"; regulator-name = "ldo2";
regulator-min-microvolt = <2900000>; regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2900000>; regulator-max-microvolt = <2800000>;
regulator-always-on; /* Unused */
regulator-boot-on; status = "disabled";
}; };
ldo3_reg: ldo3 { ldo3_reg: ldo3 {
@ -408,10 +406,11 @@
ldo8_reg: ldo8 { ldo8_reg: ldo8 {
/* VDD_3v0: Does not go anywhere */ /* VDD_3v0: Does not go anywhere */
regulator-name = "ldo8"; regulator-name = "ldo8";
regulator-min-microvolt = <1500000>; regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <1500000>; regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on; regulator-boot-on;
/* Unused */
status = "disabled";
}; };
ldo9_reg: ldo9 { ldo9_reg: ldo9 {