net: use bitrev8

Use bitrev8 for bmac, mace, macmace, macsonic, and skfp drivers.

[akpm@osdl.org: use the API, not the array]
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mirko Lindner <mlindner@syskonnect.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Akinobu Mita 2006-12-19 13:09:08 -08:00 committed by Jeff Garzik
parent 079ca7da1e
commit bc63eb9c7e
9 changed files with 27 additions and 155 deletions

View File

@ -2546,6 +2546,7 @@ config DEFXX
config SKFP
tristate "SysKonnect FDDI PCI support"
depends on FDDI && PCI
select BITREVERSE
---help---
Say Y here if you have a SysKonnect FDDI PCI adapter.
The following adapters are supported by this driver:

View File

@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/crc32.h>
#include <linux/bitrev.h>
#include <asm/prom.h>
#include <asm/dbdma.h>
#include <asm/io.h>
@ -140,7 +141,6 @@ static unsigned char *bmac_emergency_rxbuf;
+ (N_RX_RING + N_TX_RING + 4) * sizeof(struct dbdma_cmd) \
+ sizeof(struct sk_buff_head))
static unsigned char bitrev(unsigned char b);
static int bmac_open(struct net_device *dev);
static int bmac_close(struct net_device *dev);
static int bmac_transmit_packet(struct sk_buff *skb, struct net_device *dev);
@ -586,18 +586,6 @@ bmac_construct_rxbuff(struct sk_buff *skb, volatile struct dbdma_cmd *cp)
virt_to_bus(addr), 0);
}
/* Bit-reverse one byte of an ethernet hardware address. */
static unsigned char
bitrev(unsigned char b)
{
int d = 0, i;
for (i = 0; i < 8; ++i, b >>= 1)
d = (d << 1) | (b & 1);
return d;
}
static void
bmac_init_tx_ring(struct bmac_data *bp)
{
@ -1224,8 +1212,8 @@ bmac_get_station_address(struct net_device *dev, unsigned char *ea)
{
reset_and_select_srom(dev);
data = read_srom(dev, i + EnetAddressOffset/2, SROMAddressBits);
ea[2*i] = bitrev(data & 0x0ff);
ea[2*i+1] = bitrev((data >> 8) & 0x0ff);
ea[2*i] = bitrev8(data & 0x0ff);
ea[2*i+1] = bitrev8((data >> 8) & 0x0ff);
}
}
@ -1315,7 +1303,7 @@ static int __devinit bmac_probe(struct macio_dev *mdev, const struct of_device_i
rev = addr[0] == 0 && addr[1] == 0xA0;
for (j = 0; j < 6; ++j)
dev->dev_addr[j] = rev? bitrev(addr[j]): addr[j];
dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
/* Enable chip without interrupts for now */
bmac_enable_and_reset_chip(dev);

View File

@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/crc32.h>
#include <linux/spinlock.h>
#include <linux/bitrev.h>
#include <asm/prom.h>
#include <asm/dbdma.h>
#include <asm/io.h>
@ -74,7 +75,6 @@ struct mace_data {
#define PRIV_BYTES (sizeof(struct mace_data) \
+ (N_RX_RING + NCMDS_TX * N_TX_RING + 3) * sizeof(struct dbdma_cmd))
static int bitrev(int);
static int mace_open(struct net_device *dev);
static int mace_close(struct net_device *dev);
static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev);
@ -96,18 +96,6 @@ static void __mace_set_address(struct net_device *dev, void *addr);
*/
static unsigned char *dummy_buf;
/* Bit-reverse one byte of an ethernet hardware address. */
static inline int
bitrev(int b)
{
int d = 0, i;
for (i = 0; i < 8; ++i, b >>= 1)
d = (d << 1) | (b & 1);
return d;
}
static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_id *match)
{
struct device_node *mace = macio_get_of_node(mdev);
@ -173,7 +161,7 @@ static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_i
rev = addr[0] == 0 && addr[1] == 0xA0;
for (j = 0; j < 6; ++j) {
dev->dev_addr[j] = rev? bitrev(addr[j]): addr[j];
dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
}
mp->chipid = (in_8(&mp->mace->chipid_hi) << 8) |
in_8(&mp->mace->chipid_lo);

View File

@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/crc32.h>
#include <linux/bitrev.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
@ -81,19 +82,6 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id);
static irqreturn_t mace_dma_intr(int irq, void *dev_id);
static void mace_tx_timeout(struct net_device *dev);
/* Bit-reverse one byte of an ethernet hardware address. */
static int bitrev(int b)
{
int d = 0, i;
for (i = 0; i < 8; ++i, b >>= 1) {
d = (d << 1) | (b & 1);
}
return d;
}
/*
* Load a receive DMA channel with a base address and ring length
*/
@ -219,12 +207,12 @@ struct net_device *mace_probe(int unit)
addr = (void *)MACE_PROM;
for (j = 0; j < 6; ++j) {
u8 v=bitrev(addr[j<<4]);
u8 v = bitrev8(addr[j<<4]);
checksum ^= v;
dev->dev_addr[j] = v;
}
for (; j < 8; ++j) {
checksum ^= bitrev(addr[j<<4]);
checksum ^= bitrev8(addr[j<<4]);
}
if (checksum != 0xFF) {

View File

@ -121,16 +121,12 @@ enum macsonic_type {
* For reversing the PROM address
*/
static unsigned char nibbletab[] = {0, 8, 4, 12, 2, 10, 6, 14,
1, 9, 5, 13, 3, 11, 7, 15};
static inline void bit_reverse_addr(unsigned char addr[6])
{
int i;
for(i = 0; i < 6; i++)
addr[i] = ((nibbletab[addr[i] & 0xf] << 4) |
nibbletab[(addr[i] >> 4) &0xf]);
addr[i] = bitrev8(addr[i]);
}
int __init macsonic_init(struct net_device* dev)

View File

@ -1,83 +0,0 @@
/******************************************************************************
*
* (C)Copyright 1998,1999 SysKonnect,
* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
*
* See the file "skfddi.c" for further information.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
#ifndef lint
static const char xID_sccs[] = "@(#)can.c 1.5 97/04/07 (C) SK " ;
#endif
/*
* canonical bit order
*/
const u_char canonical[256] = {
0x00,0x80,0x40,0xc0,0x20,0xa0,0x60,0xe0,
0x10,0x90,0x50,0xd0,0x30,0xb0,0x70,0xf0,
0x08,0x88,0x48,0xc8,0x28,0xa8,0x68,0xe8,
0x18,0x98,0x58,0xd8,0x38,0xb8,0x78,0xf8,
0x04,0x84,0x44,0xc4,0x24,0xa4,0x64,0xe4,
0x14,0x94,0x54,0xd4,0x34,0xb4,0x74,0xf4,
0x0c,0x8c,0x4c,0xcc,0x2c,0xac,0x6c,0xec,
0x1c,0x9c,0x5c,0xdc,0x3c,0xbc,0x7c,0xfc,
0x02,0x82,0x42,0xc2,0x22,0xa2,0x62,0xe2,
0x12,0x92,0x52,0xd2,0x32,0xb2,0x72,0xf2,
0x0a,0x8a,0x4a,0xca,0x2a,0xaa,0x6a,0xea,
0x1a,0x9a,0x5a,0xda,0x3a,0xba,0x7a,0xfa,
0x06,0x86,0x46,0xc6,0x26,0xa6,0x66,0xe6,
0x16,0x96,0x56,0xd6,0x36,0xb6,0x76,0xf6,
0x0e,0x8e,0x4e,0xce,0x2e,0xae,0x6e,0xee,
0x1e,0x9e,0x5e,0xde,0x3e,0xbe,0x7e,0xfe,
0x01,0x81,0x41,0xc1,0x21,0xa1,0x61,0xe1,
0x11,0x91,0x51,0xd1,0x31,0xb1,0x71,0xf1,
0x09,0x89,0x49,0xc9,0x29,0xa9,0x69,0xe9,
0x19,0x99,0x59,0xd9,0x39,0xb9,0x79,0xf9,
0x05,0x85,0x45,0xc5,0x25,0xa5,0x65,0xe5,
0x15,0x95,0x55,0xd5,0x35,0xb5,0x75,0xf5,
0x0d,0x8d,0x4d,0xcd,0x2d,0xad,0x6d,0xed,
0x1d,0x9d,0x5d,0xdd,0x3d,0xbd,0x7d,0xfd,
0x03,0x83,0x43,0xc3,0x23,0xa3,0x63,0xe3,
0x13,0x93,0x53,0xd3,0x33,0xb3,0x73,0xf3,
0x0b,0x8b,0x4b,0xcb,0x2b,0xab,0x6b,0xeb,
0x1b,0x9b,0x5b,0xdb,0x3b,0xbb,0x7b,0xfb,
0x07,0x87,0x47,0xc7,0x27,0xa7,0x67,0xe7,
0x17,0x97,0x57,0xd7,0x37,0xb7,0x77,0xf7,
0x0f,0x8f,0x4f,0xcf,0x2f,0xaf,0x6f,0xef,
0x1f,0x9f,0x5f,0xdf,0x3f,0xbf,0x7f,0xff
} ;
#ifdef MAKE_TABLE
int byte_reverse(x)
int x ;
{
int y = 0 ;
if (x & 0x01)
y |= 0x80 ;
if (x & 0x02)
y |= 0x40 ;
if (x & 0x04)
y |= 0x20 ;
if (x & 0x08)
y |= 0x10 ;
if (x & 0x10)
y |= 0x08 ;
if (x & 0x20)
y |= 0x04 ;
if (x & 0x40)
y |= 0x02 ;
if (x & 0x80)
y |= 0x01 ;
return(y) ;
}
#endif

View File

@ -23,6 +23,7 @@
#include "h/smc.h"
#include "h/supern_2.h"
#include "h/skfbiinc.h"
#include <linux/bitrev.h>
#ifndef lint
static const char ID_sccs[] = "@(#)drvfbi.c 1.63 99/02/11 (C) SK " ;
@ -445,16 +446,14 @@ void read_address(struct s_smc *smc, u_char *mac_addr)
char PmdType ;
int i ;
extern const u_char canonical[256] ;
#if (defined(ISA) || defined(MCA))
for (i = 0; i < 4 ;i++) { /* read mac address from board */
smc->hw.fddi_phys_addr.a[i] =
canonical[(inpw(PR_A(i+SA_MAC))&0xff)] ;
bitrev8(inpw(PR_A(i+SA_MAC)));
}
for (i = 4; i < 6; i++) {
smc->hw.fddi_phys_addr.a[i] =
canonical[(inpw(PR_A(i+SA_MAC+PRA_OFF))&0xff)] ;
bitrev8(inpw(PR_A(i+SA_MAC+PRA_OFF)));
}
#endif
#ifdef EISA
@ -464,17 +463,17 @@ void read_address(struct s_smc *smc, u_char *mac_addr)
*/
for (i = 0; i < 4 ;i++) { /* read mac address from board */
smc->hw.fddi_phys_addr.a[i] =
canonical[inp(PR_A(i+SA_MAC))] ;
bitrev8(inp(PR_A(i+SA_MAC)));
}
for (i = 4; i < 6; i++) {
smc->hw.fddi_phys_addr.a[i] =
canonical[inp(PR_A(i+SA_MAC+PRA_OFF))] ;
bitrev8(inp(PR_A(i+SA_MAC+PRA_OFF)));
}
#endif
#ifdef PCI
for (i = 0; i < 6; i++) { /* read mac address from board */
smc->hw.fddi_phys_addr.a[i] =
canonical[inp(ADDR(B2_MAC_0+i))] ;
bitrev8(inp(ADDR(B2_MAC_0+i)));
}
#endif
#ifndef PCI
@ -493,7 +492,7 @@ void read_address(struct s_smc *smc, u_char *mac_addr)
if (mac_addr) {
for (i = 0; i < 6 ;i++) {
smc->hw.fddi_canon_addr.a[i] = mac_addr[i] ;
smc->hw.fddi_home_addr.a[i] = canonical[mac_addr[i]] ;
smc->hw.fddi_home_addr.a[i] = bitrev8(mac_addr[i]);
}
return ;
}
@ -501,7 +500,7 @@ void read_address(struct s_smc *smc, u_char *mac_addr)
for (i = 0; i < 6 ;i++) {
smc->hw.fddi_canon_addr.a[i] =
canonical[smc->hw.fddi_phys_addr.a[i]] ;
bitrev8(smc->hw.fddi_phys_addr.a[i]);
}
}
@ -1269,11 +1268,8 @@ void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr)
{
int i ;
extern const u_char canonical[256] ;
for (i = 0 ; i < 6 ; i++) {
bia_addr->a[i] = canonical[smc->hw.fddi_phys_addr.a[i]] ;
}
for (i = 0 ; i < 6 ; i++)
bia_addr->a[i] = bitrev8(smc->hw.fddi_phys_addr.a[i]);
}
void smt_start_watchdog(struct s_smc *smc)

View File

@ -22,7 +22,7 @@
#include "h/fddi.h"
#include "h/smc.h"
#include "h/supern_2.h"
#include "can.c"
#include <linux/bitrev.h>
#ifndef lint
static const char ID_sccs[] = "@(#)fplustm.c 1.32 99/02/23 (C) SK " ;
@ -1073,7 +1073,7 @@ static struct s_fpmc* mac_get_mc_table(struct s_smc *smc,
if (can) {
p = own->a ;
for (i = 0 ; i < 6 ; i++, p++)
*p = canonical[*p] ;
*p = bitrev8(*p);
}
slot = NULL;
for (i = 0, tb = smc->hw.fp.mc.table ; i < FPMAX_MULTICAST ; i++, tb++){

View File

@ -18,6 +18,7 @@
#include "h/fddi.h"
#include "h/smc.h"
#include "h/smt_p.h"
#include <linux/bitrev.h>
#define KERNEL
#include "h/smtstate.h"
@ -26,8 +27,6 @@
static const char ID_sccs[] = "@(#)smt.c 2.43 98/11/23 (C) SK " ;
#endif
extern const u_char canonical[256] ;
/*
* FC in SMbuf
*/
@ -180,7 +179,7 @@ void smt_agent_init(struct s_smc *smc)
driver_get_bia(smc,&smc->mib.fddiSMTStationId.sid_node) ;
for (i = 0 ; i < 6 ; i ++) {
smc->mib.fddiSMTStationId.sid_node.a[i] =
canonical[smc->mib.fddiSMTStationId.sid_node.a[i]] ;
bitrev8(smc->mib.fddiSMTStationId.sid_node.a[i]);
}
smc->mib.fddiSMTManufacturerData[0] =
smc->mib.fddiSMTStationId.sid_node.a[0] ;
@ -2049,9 +2048,8 @@ static void hwm_conv_can(struct s_smc *smc, char *data, int len)
SK_UNUSED(smc) ;
for (i = len; i ; i--, data++) {
*data = canonical[*(u_char *)data] ;
}
for (i = len; i ; i--, data++)
*data = bitrev8(*data);
}
#endif