watchdog: Driver for the watchdog timer on Freescale IMX2 (and later) processors.
This is the driver for the hardware watchdog on the Freescale IMX2 and later processors. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This commit is contained in:
Wolfram Sang
Wim Van Sebroeck
parent
100fb76f0a
commit
bb2fd8a844
|
|
@ -312,6 +312,18 @@ config MAX63XX_WATCHDOG
|
|||
help
|
||||
Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
|
||||
|
||||
config IMX2_WDT
|
||||
tristate "IMX2+ Watchdog"
|
||||
depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX5
|
||||
help
|
||||
This is the driver for the hardware watchdog
|
||||
on the Freescale IMX2 and later processors.
|
||||
If you have one of these processors and wish to have
|
||||
watchdog support enabled, say Y, otherwise say N.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called imx2_wdt.
|
||||
|
||||
# AVR32 Architecture
|
||||
|
||||
config AT32AP700X_WDT
|
||||
|
|
|
|||
|
|
@ -47,6 +47,7 @@ obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
|
|||
obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
|
||||
obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
|
||||
obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
|
||||
obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
|
||||
|
||||
# AVR32 Architecture
|
||||
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,358 @@
|
|||
/*
|
||||
* Watchdog driver for IMX2 and later processors
|
||||
*
|
||||
* Copyright (C) 2010 Wolfram Sang, Pengutronix e.K. <w.sang@pengutronix.de>
|
||||
*
|
||||
* some parts adapted by similar drivers from Darius Augulis and Vladimir
|
||||
* Zapolskiy, additional improvements by Wim Van Sebroeck.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*
|
||||
* NOTE: MX1 has a slightly different Watchdog than MX2 and later:
|
||||
*
|
||||
* MX1: MX2+:
|
||||
* ---- -----
|
||||
* Registers: 32-bit 16-bit
|
||||
* Stopable timer: Yes No
|
||||
* Need to enable clk: No Yes
|
||||
* Halt on suspend: Manual Can be automatic
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/miscdevice.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/watchdog.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/fs.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/uaccess.h>
|
||||
#include <linux/timer.h>
|
||||
#include <linux/jiffies.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
#define DRIVER_NAME "imx2-wdt"
|
||||
|
||||
#define IMX2_WDT_WCR 0x00 /* Control Register */
|
||||
#define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */
|
||||
#define IMX2_WDT_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */
|
||||
#define IMX2_WDT_WCR_WDE (1 << 2) /* -> Watchdog Enable */
|
||||
|
||||
#define IMX2_WDT_WSR 0x02 /* Service Register */
|
||||
#define IMX2_WDT_SEQ1 0x5555 /* -> service sequence 1 */
|
||||
#define IMX2_WDT_SEQ2 0xAAAA /* -> service sequence 2 */
|
||||
|
||||
#define IMX2_WDT_MAX_TIME 128
|
||||
#define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */
|
||||
|
||||
#define WDOG_SEC_TO_COUNT(s) ((s * 2 - 1) << 8)
|
||||
|
||||
#define IMX2_WDT_STATUS_OPEN 0
|
||||
#define IMX2_WDT_STATUS_STARTED 1
|
||||
#define IMX2_WDT_EXPECT_CLOSE 2
|
||||
|
||||
static struct {
|
||||
struct clk *clk;
|
||||
void __iomem *base;
|
||||
unsigned timeout;
|
||||
unsigned long status;
|
||||
struct timer_list timer; /* Pings the watchdog when closed */
|
||||
} imx2_wdt;
|
||||
|
||||
static struct miscdevice imx2_wdt_miscdev;
|
||||
|
||||
static int nowayout = WATCHDOG_NOWAYOUT;
|
||||
module_param(nowayout, int, 0);
|
||||
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
|
||||
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
||||
|
||||
|
||||
static unsigned timeout = IMX2_WDT_DEFAULT_TIME;
|
||||
module_param(timeout, uint, 0);
|
||||
MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="
|
||||
__MODULE_STRING(IMX2_WDT_DEFAULT_TIME) ")");
|
||||
|
||||
static const struct watchdog_info imx2_wdt_info = {
|
||||
.identity = "imx2+ watchdog",
|
||||
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
|
||||
};
|
||||
|
||||
static inline void imx2_wdt_setup(void)
|
||||
{
|
||||
u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR);
|
||||
|
||||
/* Strip the old watchdog Time-Out value */
|
||||
val &= ~IMX2_WDT_WCR_WT;
|
||||
/* Generate reset if WDOG times out */
|
||||
val &= ~IMX2_WDT_WCR_WRE;
|
||||
/* Keep Watchdog Disabled */
|
||||
val &= ~IMX2_WDT_WCR_WDE;
|
||||
/* Set the watchdog's Time-Out value */
|
||||
val |= WDOG_SEC_TO_COUNT(imx2_wdt.timeout);
|
||||
|
||||
__raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR);
|
||||
|
||||
/* enable the watchdog */
|
||||
val |= IMX2_WDT_WCR_WDE;
|
||||
__raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR);
|
||||
}
|
||||
|
||||
static inline void imx2_wdt_ping(void)
|
||||
{
|
||||
__raw_writew(IMX2_WDT_SEQ1, imx2_wdt.base + IMX2_WDT_WSR);
|
||||
__raw_writew(IMX2_WDT_SEQ2, imx2_wdt.base + IMX2_WDT_WSR);
|
||||
}
|
||||
|
||||
static void imx2_wdt_timer_ping(unsigned long arg)
|
||||
{
|
||||
/* ping it every imx2_wdt.timeout / 2 seconds to prevent reboot */
|
||||
imx2_wdt_ping();
|
||||
mod_timer(&imx2_wdt.timer, jiffies + imx2_wdt.timeout * HZ / 2);
|
||||
}
|
||||
|
||||
static void imx2_wdt_start(void)
|
||||
{
|
||||
if (!test_and_set_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) {
|
||||
/* at our first start we enable clock and do initialisations */
|
||||
clk_enable(imx2_wdt.clk);
|
||||
|
||||
imx2_wdt_setup();
|
||||
} else /* delete the timer that pings the watchdog after close */
|
||||
del_timer_sync(&imx2_wdt.timer);
|
||||
|
||||
/* Watchdog is enabled - time to reload the timeout value */
|
||||
imx2_wdt_ping();
|
||||
}
|
||||
|
||||
static void imx2_wdt_stop(void)
|
||||
{
|
||||
/* we don't need a clk_disable, it cannot be disabled once started.
|
||||
* We use a timer to ping the watchdog while /dev/watchdog is closed */
|
||||
imx2_wdt_timer_ping(0);
|
||||
}
|
||||
|
||||
static void imx2_wdt_set_timeout(int new_timeout)
|
||||
{
|
||||
u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR);
|
||||
|
||||
/* set the new timeout value in the WSR */
|
||||
val &= ~IMX2_WDT_WCR_WT;
|
||||
val |= WDOG_SEC_TO_COUNT(new_timeout);
|
||||
__raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR);
|
||||
}
|
||||
|
||||
static int imx2_wdt_open(struct inode *inode, struct file *file)
|
||||
{
|
||||
if (test_and_set_bit(IMX2_WDT_STATUS_OPEN, &imx2_wdt.status))
|
||||
return -EBUSY;
|
||||
|
||||
imx2_wdt_start();
|
||||
return nonseekable_open(inode, file);
|
||||
}
|
||||
|
||||
static int imx2_wdt_close(struct inode *inode, struct file *file)
|
||||
{
|
||||
if (test_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status) && !nowayout)
|
||||
imx2_wdt_stop();
|
||||
else {
|
||||
dev_crit(imx2_wdt_miscdev.parent,
|
||||
"Unexpected close: Expect reboot!\n");
|
||||
imx2_wdt_ping();
|
||||
}
|
||||
|
||||
clear_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status);
|
||||
clear_bit(IMX2_WDT_STATUS_OPEN, &imx2_wdt.status);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static long imx2_wdt_ioctl(struct file *file, unsigned int cmd,
|
||||
unsigned long arg)
|
||||
{
|
||||
void __user *argp = (void __user *)arg;
|
||||
int __user *p = argp;
|
||||
int new_value;
|
||||
|
||||
switch (cmd) {
|
||||
case WDIOC_GETSUPPORT:
|
||||
return copy_to_user(argp, &imx2_wdt_info,
|
||||
sizeof(struct watchdog_info)) ? -EFAULT : 0;
|
||||
|
||||
case WDIOC_GETSTATUS:
|
||||
case WDIOC_GETBOOTSTATUS:
|
||||
return put_user(0, p);
|
||||
|
||||
case WDIOC_KEEPALIVE:
|
||||
imx2_wdt_ping();
|
||||
return 0;
|
||||
|
||||
case WDIOC_SETTIMEOUT:
|
||||
if (get_user(new_value, p))
|
||||
return -EFAULT;
|
||||
if ((new_value < 1) || (new_value > IMX2_WDT_MAX_TIME))
|
||||
return -EINVAL;
|
||||
imx2_wdt_set_timeout(new_value);
|
||||
imx2_wdt.timeout = new_value;
|
||||
imx2_wdt_ping();
|
||||
|
||||
/* Fallthrough to return current value */
|
||||
case WDIOC_GETTIMEOUT:
|
||||
return put_user(imx2_wdt.timeout, p);
|
||||
|
||||
default:
|
||||
return -ENOTTY;
|
||||
}
|
||||
}
|
||||
|
||||
static ssize_t imx2_wdt_write(struct file *file, const char __user *data,
|
||||
size_t len, loff_t *ppos)
|
||||
{
|
||||
size_t i;
|
||||
char c;
|
||||
|
||||
if (len == 0) /* Can we see this even ? */
|
||||
return 0;
|
||||
|
||||
clear_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status);
|
||||
/* scan to see whether or not we got the magic character */
|
||||
for (i = 0; i != len; i++) {
|
||||
if (get_user(c, data + i))
|
||||
return -EFAULT;
|
||||
if (c == 'V')
|
||||
set_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status);
|
||||
}
|
||||
|
||||
imx2_wdt_ping();
|
||||
return len;
|
||||
}
|
||||
|
||||
static const struct file_operations imx2_wdt_fops = {
|
||||
.owner = THIS_MODULE,
|
||||
.llseek = no_llseek,
|
||||
.unlocked_ioctl = imx2_wdt_ioctl,
|
||||
.open = imx2_wdt_open,
|
||||
.release = imx2_wdt_close,
|
||||
.write = imx2_wdt_write,
|
||||
};
|
||||
|
||||
static struct miscdevice imx2_wdt_miscdev = {
|
||||
.minor = WATCHDOG_MINOR,
|
||||
.name = "watchdog",
|
||||
.fops = &imx2_wdt_fops,
|
||||
};
|
||||
|
||||
static int __init imx2_wdt_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret;
|
||||
int res_size;
|
||||
struct resource *res;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!res) {
|
||||
dev_err(&pdev->dev, "can't get device resources\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
res_size = resource_size(res);
|
||||
if (!devm_request_mem_region(&pdev->dev, res->start, res_size,
|
||||
res->name)) {
|
||||
dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n",
|
||||
res_size, res->start);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
imx2_wdt.base = devm_ioremap_nocache(&pdev->dev, res->start, res_size);
|
||||
if (!imx2_wdt.base) {
|
||||
dev_err(&pdev->dev, "ioremap failed\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
imx2_wdt.clk = clk_get_sys("imx-wdt.0", NULL);
|
||||
if (IS_ERR(imx2_wdt.clk)) {
|
||||
dev_err(&pdev->dev, "can't get Watchdog clock\n");
|
||||
return PTR_ERR(imx2_wdt.clk);
|
||||
}
|
||||
|
||||
imx2_wdt.timeout = clamp_t(unsigned, timeout, 1, IMX2_WDT_MAX_TIME);
|
||||
if (imx2_wdt.timeout != timeout)
|
||||
dev_warn(&pdev->dev, "Initial timeout out of range! "
|
||||
"Clamped from %u to %u\n", timeout, imx2_wdt.timeout);
|
||||
|
||||
setup_timer(&imx2_wdt.timer, imx2_wdt_timer_ping, 0);
|
||||
|
||||
imx2_wdt_miscdev.parent = &pdev->dev;
|
||||
ret = misc_register(&imx2_wdt_miscdev);
|
||||
if (ret)
|
||||
goto fail;
|
||||
|
||||
dev_info(&pdev->dev,
|
||||
"IMX2+ Watchdog Timer enabled. timeout=%ds (nowayout=%d)\n",
|
||||
imx2_wdt.timeout, nowayout);
|
||||
return 0;
|
||||
|
||||
fail:
|
||||
imx2_wdt_miscdev.parent = NULL;
|
||||
clk_put(imx2_wdt.clk);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __exit imx2_wdt_remove(struct platform_device *pdev)
|
||||
{
|
||||
misc_deregister(&imx2_wdt_miscdev);
|
||||
|
||||
if (test_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) {
|
||||
del_timer_sync(&imx2_wdt.timer);
|
||||
|
||||
dev_crit(imx2_wdt_miscdev.parent,
|
||||
"Device removed: Expect reboot!\n");
|
||||
} else
|
||||
clk_put(imx2_wdt.clk);
|
||||
|
||||
imx2_wdt_miscdev.parent = NULL;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void imx2_wdt_shutdown(struct platform_device *pdev)
|
||||
{
|
||||
if (test_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) {
|
||||
/* we are running, we need to delete the timer but will give
|
||||
* max timeout before reboot will take place */
|
||||
del_timer_sync(&imx2_wdt.timer);
|
||||
imx2_wdt_set_timeout(IMX2_WDT_MAX_TIME);
|
||||
imx2_wdt_ping();
|
||||
|
||||
dev_crit(imx2_wdt_miscdev.parent,
|
||||
"Device shutdown: Expect reboot!\n");
|
||||
}
|
||||
}
|
||||
|
||||
static struct platform_driver imx2_wdt_driver = {
|
||||
.probe = imx2_wdt_probe,
|
||||
.remove = __exit_p(imx2_wdt_remove),
|
||||
.shutdown = imx2_wdt_shutdown,
|
||||
.driver = {
|
||||
.name = DRIVER_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init imx2_wdt_init(void)
|
||||
{
|
||||
return platform_driver_probe(&imx2_wdt_driver, imx2_wdt_probe);
|
||||
}
|
||||
module_init(imx2_wdt_init);
|
||||
|
||||
static void __exit imx2_wdt_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&imx2_wdt_driver);
|
||||
}
|
||||
module_exit(imx2_wdt_exit);
|
||||
|
||||
MODULE_AUTHOR("Wolfram Sang");
|
||||
MODULE_DESCRIPTION("Watchdog driver for IMX2 and later");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|
||||
MODULE_ALIAS("platform:" DRIVER_NAME);
|
||||
Loading…
Reference in New Issue