hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Char/Misc drivers for 4.14-rc1 

Here is the big char/misc driver update for 4.14-rc1.
 
 Lots of different stuff in here, it's been an active development cycle
 for some reason.  Highlights are:
   - updated binder driver, this brings binder up to date with what
     shipped in the Android O release, plus some more changes that
     happened since then that are in the Android development trees.
   - coresight updates and fixes
   - mux driver file renames to be a bit "nicer"
   - intel_th driver updates
   - normal set of hyper-v updates and changes
   - small fpga subsystem and driver updates
   - lots of const code changes all over the driver trees
   - extcon driver updates
   - fmc driver subsystem upadates
   - w1 subsystem minor reworks and new features and drivers added
   - spmi driver updates
 
 Plus a smattering of other minor driver updates and fixes.
 
 All of these have been in linux-next with no reported issues for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1+Ew8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yl26wCgquufNylfhxr65NbJrovduJYzRnUAniCivXg8
 bePIh/JI5WxWoHK+wEbY
 =hYWx
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.14-rc1.

  Lots of different stuff in here, it's been an active development cycle
  for some reason. Highlights are:

   - updated binder driver, this brings binder up to date with what
     shipped in the Android O release, plus some more changes that
     happened since then that are in the Android development trees.

   - coresight updates and fixes

   - mux driver file renames to be a bit "nicer"

   - intel_th driver updates

   - normal set of hyper-v updates and changes

   - small fpga subsystem and driver updates

   - lots of const code changes all over the driver trees

   - extcon driver updates

   - fmc driver subsystem upadates

   - w1 subsystem minor reworks and new features and drivers added

   - spmi driver updates

  Plus a smattering of other minor driver updates and fixes.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits)
  ANDROID: binder: don't queue async transactions to thread.
  ANDROID: binder: don't enqueue death notifications to thread todo.
  ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
  ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl
  ANDROID: binder: push new transactions to waiting threads.
  ANDROID: binder: remove proc waitqueue
  android: binder: Add page usage in binder stats
  android: binder: fixup crash introduced by moving buffer hdr
  drivers: w1: add hwmon temp support for w1_therm
  drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
  drivers: w1: add hwmon support structures
  eeprom: idt_89hpesx: Support both ACPI and OF probing
  mcb: Fix an error handling path in 'chameleon_parse_cells()'
  MCB: add support for SC31 to mcb-lpc
  mux: make device_type const
  char: virtio: constify attribute_group structures.
  Documentation/ABI: document the nvmem sysfs files
  lkdtm: fix spelling mistake: "incremeted" -> "incremented"
  perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file
  nvmem: include linux/err.h from header
  ...
This commit is contained in:
Linus Torvalds 2017-09-05 11:08:17 -07:00
parent 44b1671fae 3a6430ce46
commit bafb0762cb
175 changed files with 9546 additions and 3095 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
Documentation/ABI/stable/sysfs-bus-nvmem Normal file
View File

@ -0,0 +1,19 @@
What: /sys/bus/nvmem/devices/.../nvmem
Date: July 2015
KernelVersion: 4.2
Contact: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Description:
This file allows user to read/write the raw NVMEM contents.
Permissions for write to this file depends on the nvmem
provider configuration.
ex:
hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
0000000 0000 0000 0000 0000 0000 0000 0000 0000
*
00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
0000000 0000 0000 0000 0000 0000 0000 0000 0000
...
*
0001000

2
Documentation/ABI/testing/sysfs-bus-thunderbolt
View File

@ -45,6 +45,8 @@ Contact: thunderbolt-software@lists.01.org
Description: When a devices supports Thunderbolt secure connect it will
have this attribute. Writing 32 byte hex string changes
authorization to use the secure connection method instead.
Writing an empty string clears the key and regular connection
method can be used again.
What: /sys/bus/thunderbolt/devices/.../device
Date: Sep 2017

8
Documentation/ABI/testing/sysfs-driver-altera-cvp Normal file
View File

@ -0,0 +1,8 @@
What: /sys/bus/pci/drivers/altera-cvp/chkcfg
Date: May 2017
Kernel Version: 4.13
Contact: Anatolij Gustschin <agust@denx.de>
Description:
Contains either 1 or 0 and controls if configuration
error checking in altera-cvp driver is turned on or
off.

5
Documentation/admin-guide/devices.txt
View File

@ -3081,3 +3081,8 @@
1 = /dev/osd1 Second OSD Device
...
255 = /dev/osd255 256th OSD Device
384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
Character devices that request a dynamic allocation of major
number will take numbers starting from 511 and downward,
once the 234-254 range is full.

4
Documentation/devicetree/bindings/arm/coresight.txt
View File

@ -34,8 +34,8 @@ its hardware characteristcs.
- Embedded Trace Macrocell (version 4.x):
"arm,coresight-etm4x", "arm,primecell";
- Qualcomm Configurable Replicator (version 1.x):
"qcom,coresight-replicator1x", "arm,primecell";
- Coresight programmable Replicator :
"arm,coresight-dynamic-replicator", "arm,primecell";
- System Trace Macrocell:
"arm,coresight-stm", "arm,primecell"; [1]

24
Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt Normal file
View File

@ -0,0 +1,24 @@
ChromeOS EC USB Type-C cable and accessories detection
On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
able to detect the state of external accessories such as display adapters
or USB devices when said accessories are attached or detached.
The node for this device must be under a cros-ec node like google,cros-ec-spi
or google,cros-ec-i2c.
Required properties:
- compatible: Should be "google,extcon-usbc-cros-ec".
- google,usb-port-id: Specifies the USB port ID to use.
Example:
cros-ec@0 {
compatible = "google,cros-ec-i2c";
...
extcon {
compatible = "google,extcon-usbc-cros-ec";
google,usb-port-id = <0>;
};
}

29
Documentation/devicetree/bindings/fpga/altera-passive-serial.txt Normal file
View File

@ -0,0 +1,29 @@
Altera Passive Serial SPI FPGA Manager
Altera FPGAs support a method of loading the bitstream over what is
referred to as "passive serial".
The passive serial link is not technically SPI, and might require extra
circuits in order to play nicely with other SPI slaves on the same bus.
See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
Required properties:
- compatible: Must be one of the following:
"altr,fpga-passive-serial",
"altr,fpga-arria10-passive-serial"
- reg: SPI chip select of the FPGA
- nconfig-gpios: config pin (referred to as nCONFIG in the manual)
- nstat-gpios: status pin (referred to as nSTATUS in the manual)
Optional properties:
- confd-gpios: confd pin (referred to as CONF_DONE in the manual)
Example:
fpga: fpga@0 {
compatible = "altr,fpga-passive-serial";
spi-max-frequency = <20000000>;
reg = <0>;
nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
};

36
Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt Normal file
View File

@ -0,0 +1,36 @@
Xilinx LogiCORE Partial Reconfig Decoupler Softcore
The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
decouplers / fpga bridges.
The controller can decouple/disable the bridges which prevents signal
changes from passing through the bridge. The controller can also
couple / enable the bridges which allows traffic to pass through the
bridge normally.
The Driver supports only MMIO handling. A PR region can have multiple
PR Decouplers which can be handled independently or chained via decouple/
decouple_status signals.
Required properties:
- compatible : Should contain "xlnx,pr-decoupler-1.00" followed by
"xlnx,pr-decoupler"
- regs : base address and size for decoupler module
- clocks : input clock to IP
- clock-names : should contain "aclk"
Optional properties:
- bridge-enable : 0 if driver should disable bridge at startup
1 if driver should enable bridge at startup
Default is to leave bridge in current state.
See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
Example:
fpga-bridge@100000450 {
compatible = "xlnx,pr-decoupler-1.00",
"xlnx-pr-decoupler";
regs = <0x10000045 0x10>;
clocks = <&clkc 15>;
clock-names = "aclk";
bridge-enable = <0>;
};

1
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -175,6 +175,7 @@ kosagi Sutajio Ko-Usagi PTE Ltd.
kyo Kyocera Corporation
lacie LaCie
lantiq Lantiq Semiconductor
lattice Lattice Semiconductor
lego LEGO Systems A/S
lenovo Lenovo Group Ltd.
lg LG Corporation

2
Documentation/devicetree/bindings/xilinx.txt
View File

@ -281,6 +281,8 @@
capabilities of the underlying ICAP hardware
differ between different families. May be
'virtex2p', 'virtex4', or 'virtex5'.
- compatible : should contain "xlnx,xps-hwicap-1.00.a" or
"xlnx,opb-hwicap-1.00.b".
vi) Xilinx Uart 16550

13
Documentation/trace/stm.txt
View File

@ -83,7 +83,7 @@ by writing the name of the desired stm device there, for example:
$ echo dummy_stm.0 > /sys/class/stm_source/console/stm_source_link
For examples on how to use stm_source interface in the kernel, refer
to stm_console or stm_heartbeat drivers.
to stm_console, stm_heartbeat or stm_ftrace drivers.
Each stm_source device will need to assume a master and a range of
channels, depending on how many channels it requires. These are
@ -107,5 +107,16 @@ console in the STP stream, create a "console" policy entry (see the
beginning of this text on how to do that). When initialized, it will
consume one channel.
stm_ftrace
==========
This is another "stm_source" device, once the stm_ftrace has been
linked with an stm device, and if "function" tracer is enabled,
function address and parent function address which Ftrace subsystem
would store into ring buffer will be exported via the stm device at
the same time.
Currently only Ftrace "function" tracer is supported.
[1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf
[2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0444b/index.html

4
MAINTAINERS
View File

@ -5362,10 +5362,11 @@ K: fmc_d.*register
FPGA MANAGER FRAMEWORK
M: Alan Tull <atull@kernel.org>
R: Moritz Fischer <moritz.fischer@ettus.com>
R: Moritz Fischer <mdf@kernel.org>
L: linux-fpga@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git
Q: http://patchwork.kernel.org/project/linux-fpga/list/
F: Documentation/fpga/
F: Documentation/devicetree/bindings/fpga/
F: drivers/fpga/
@ -9484,6 +9485,7 @@ M: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
S: Maintained
F: drivers/nvmem/
F: Documentation/devicetree/bindings/nvmem/
F: Documentation/ABI/stable/sysfs-bus-nvmem
F: include/linux/nvmem-consumer.h
F: include/linux/nvmem-provider.h

16
arch/arm/boot/dts/imx6q-evi.dts
View File

@ -94,6 +94,15 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
status = "okay";
fpga: fpga@0 {
compatible = "altr,fpga-passive-serial";
spi-max-frequency = <20000000>;
reg = <0>;
pinctrl-0 = <&pinctrl_fpgaspi>;
nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
};
};
&ecspi3 {
@ -319,6 +328,13 @@
>;
};
pinctrl_fpgaspi: fpgaspigrp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
>;
};
pinctrl_gpminand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1

2
arch/x86/include/asm/mshyperv.h
View File

@ -28,6 +28,8 @@ struct ms_hyperv_info {
u32 features;
u32 misc_features;
u32 hints;
u32 max_vp_index;
u32 max_lp_index;
};
extern struct ms_hyperv_info ms_hyperv;

12
arch/x86/kernel/cpu/mshyperv.c
View File

@ -179,9 +179,15 @@ static void __init ms_hyperv_init_platform(void)
ms_hyperv.misc_features = cpuid_edx(HYPERV_CPUID_FEATURES);
ms_hyperv.hints = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO);
pr_info("HyperV: features 0x%x, hints 0x%x\n",
pr_info("Hyper-V: features 0x%x, hints 0x%x\n",
ms_hyperv.features, ms_hyperv.hints);
ms_hyperv.max_vp_index = cpuid_eax(HVCPUID_IMPLEMENTATION_LIMITS);
ms_hyperv.max_lp_index = cpuid_ebx(HVCPUID_IMPLEMENTATION_LIMITS);
pr_debug("Hyper-V: max %u virtual processors, %u logical processors\n",
ms_hyperv.max_vp_index, ms_hyperv.max_lp_index);
/*
* Extract host information.
*/
@ -214,7 +220,7 @@ static void __init ms_hyperv_init_platform(void)
rdmsrl(HV_X64_MSR_APIC_FREQUENCY, hv_lapic_frequency);
hv_lapic_frequency = div_u64(hv_lapic_frequency, HZ);
lapic_timer_frequency = hv_lapic_frequency;
pr_info("HyperV: LAPIC Timer Frequency: %#x\n",
pr_info("Hyper-V: LAPIC Timer Frequency: %#x\n",
lapic_timer_frequency);
}
@ -248,7 +254,7 @@ static void __init ms_hyperv_init_platform(void)
}
const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
.name = "Microsoft HyperV",
.name = "Microsoft Hyper-V",
.detect = ms_hyperv_platform,
.init_platform = ms_hyperv_init_platform,
};

18
block/genhd.c
View File

@ -242,6 +242,7 @@ EXPORT_SYMBOL_GPL(disk_map_sector_rcu);
* Can be deleted altogether. Later.
*
*/
#define BLKDEV_MAJOR_HASH_SIZE 255
static struct blk_major_name {
struct blk_major_name *next;
int major;
@ -259,12 +260,11 @@ void blkdev_show(struct seq_file *seqf, off_t offset)
{
struct blk_major_name *dp;
if (offset < BLKDEV_MAJOR_HASH_SIZE) {
mutex_lock(&block_class_lock);
for (dp = major_names[offset]; dp; dp = dp->next)
mutex_lock(&block_class_lock);
for (dp = major_names[major_to_index(offset)]; dp; dp = dp->next)
if (dp->major == offset)
seq_printf(seqf, "%3d %s\n", dp->major, dp->name);
mutex_unlock(&block_class_lock);
}
mutex_unlock(&block_class_lock);
}
#endif /* CONFIG_PROC_FS */
@ -309,6 +309,14 @@ int register_blkdev(unsigned int major, const char *name)
ret = major;
}
if (major >= BLKDEV_MAJOR_MAX) {
pr_err("register_blkdev: major requested (%d) is greater than the maximum (%d) for %s\n",
major, BLKDEV_MAJOR_MAX, name);
ret = -EINVAL;
goto out;
}
p = kmalloc(sizeof(struct blk_major_name), GFP_KERNEL);
if (p == NULL) {
ret = -ENOMEM;

14
drivers/android/Kconfig
View File

@ -22,7 +22,7 @@ config ANDROID_BINDER_IPC
config ANDROID_BINDER_DEVICES
string "Android Binder devices"
depends on ANDROID_BINDER_IPC
default "binder,hwbinder"
default "binder,hwbinder,vndbinder"
---help---
Default value for the binder.devices parameter.
@ -32,7 +32,7 @@ config ANDROID_BINDER_DEVICES
therefore logically separated from the other devices.
config ANDROID_BINDER_IPC_32BIT
bool
bool "Use old (Android 4.4 and earlier) 32-bit binder API"
depends on !64BIT && ANDROID_BINDER_IPC
default y
---help---
@ -44,6 +44,16 @@ config ANDROID_BINDER_IPC_32BIT
Note that enabling this will break newer Android user-space.
config ANDROID_BINDER_IPC_SELFTEST
bool "Android Binder IPC Driver Selftest"
depends on ANDROID_BINDER_IPC
---help---
This feature allows binder selftest to run.
Binder selftest checks the allocation and free of binder buffers
exhaustively with combinations of various buffer sizes and
alignments.
endif # if ANDROID
endmenu

3
drivers/android/Makefile
View File

@ -1,3 +1,4 @@
ccflags-y += -I$(src) # needed for trace events
obj-$(CONFIG_ANDROID_BINDER_IPC) += binder.o
obj-$(CONFIG_ANDROID_BINDER_IPC) += binder.o binder_alloc.o
obj-$(CONFIG_ANDROID_BINDER_IPC_SELFTEST) += binder_alloc_selftest.o

3786
drivers/android/binder.c
View File

File diff suppressed because it is too large Load Diff

1009
drivers/android/binder_alloc.c Normal file
View File

File diff suppressed because it is too large Load Diff

187
drivers/android/binder_alloc.h Normal file
View File

@ -0,0 +1,187 @@
/*
* Copyright (C) 2017 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef _LINUX_BINDER_ALLOC_H
#define _LINUX_BINDER_ALLOC_H
#include <linux/rbtree.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/rtmutex.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/list_lru.h>
extern struct list_lru binder_alloc_lru;
struct binder_transaction;
/**
* struct binder_buffer - buffer used for binder transactions
* @entry: entry alloc->buffers
* @rb_node: node for allocated_buffers/free_buffers rb trees
* @free: true if buffer is free
* @allow_user_free: describe the second member of struct blah,
* @async_transaction: describe the second member of struct blah,
* @debug_id: describe the second member of struct blah,
* @transaction: describe the second member of struct blah,
* @target_node: describe the second member of struct blah,
* @data_size: describe the second member of struct blah,
* @offsets_size: describe the second member of struct blah,
* @extra_buffers_size: describe the second member of struct blah,
* @data:i describe the second member of struct blah,
*
* Bookkeeping structure for binder transaction buffers
*/
struct binder_buffer {
struct list_head entry; /* free and allocated entries by address */
struct rb_node rb_node; /* free entry by size or allocated entry */
/* by address */
unsigned free:1;
unsigned allow_user_free:1;
unsigned async_transaction:1;
unsigned free_in_progress:1;
unsigned debug_id:28;
struct binder_transaction *transaction;
struct binder_node *target_node;
size_t data_size;
size_t offsets_size;
size_t extra_buffers_size;
void *data;
};
/**
* struct binder_lru_page - page object used for binder shrinker
* @page_ptr: pointer to physical page in mmap'd space
* @lru: entry in binder_alloc_lru
* @alloc: binder_alloc for a proc
*/
struct binder_lru_page {
struct list_head lru;
struct page *page_ptr;
struct binder_alloc *alloc;
};
/**
* struct binder_alloc - per-binder proc state for binder allocator
* @vma: vm_area_struct passed to mmap_handler
* (invarient after mmap)
* @tsk: tid for task that called init for this proc
* (invariant after init)
* @vma_vm_mm: copy of vma->vm_mm (invarient after mmap)
* @buffer: base of per-proc address space mapped via mmap
* @user_buffer_offset: offset between user and kernel VAs for buffer
* @buffers: list of all buffers for this proc
* @free_buffers: rb tree of buffers available for allocation
* sorted by size
* @allocated_buffers: rb tree of allocated buffers sorted by address
* @free_async_space: VA space available for async buffers. This is
* initialized at mmap time to 1/2 the full VA space
* @pages: array of binder_lru_page
* @buffer_size: size of address space specified via mmap
* @pid: pid for associated binder_proc (invariant after init)
*
* Bookkeeping structure for per-proc address space management for binder
* buffers. It is normally initialized during binder_init() and binder_mmap()
* calls. The address space is used for both user-visible buffers and for
* struct binder_buffer objects used to track the user buffers
*/
struct binder_alloc {
struct mutex mutex;
struct task_struct *tsk;
struct vm_area_struct *vma;
struct mm_struct *vma_vm_mm;
void *buffer;
ptrdiff_t user_buffer_offset;
struct list_head buffers;
struct rb_root free_buffers;
struct rb_root allocated_buffers;
size_t free_async_space;
struct binder_lru_page *pages;
size_t buffer_size;
uint32_t buffer_free;
int pid;
};
#ifdef CONFIG_ANDROID_BINDER_IPC_SELFTEST
void binder_selftest_alloc(struct binder_alloc *alloc);
#else
static inline void binder_selftest_alloc(struct binder_alloc *alloc) {}
#endif
enum lru_status binder_alloc_free_page(struct list_head *item,
struct list_lru_one *lru,
spinlock_t *lock, void *cb_arg);
extern struct binder_buffer *binder_alloc_new_buf(struct binder_alloc *alloc,
size_t data_size,
size_t offsets_size,
size_t extra_buffers_size,
int is_async);
extern void binder_alloc_init(struct binder_alloc *alloc);
void binder_alloc_shrinker_init(void);
extern void binder_alloc_vma_close(struct binder_alloc *alloc);
extern struct binder_buffer *
binder_alloc_prepare_to_free(struct binder_alloc *alloc,
uintptr_t user_ptr);
extern void binder_alloc_free_buf(struct binder_alloc *alloc,
struct binder_buffer *buffer);
extern int binder_alloc_mmap_handler(struct binder_alloc *alloc,
struct vm_area_struct *vma);
extern void binder_alloc_deferred_release(struct binder_alloc *alloc);
extern int binder_alloc_get_allocated_count(struct binder_alloc *alloc);
extern void binder_alloc_print_allocated(struct seq_file *m,
struct binder_alloc *alloc);
void binder_alloc_print_pages(struct seq_file *m,
struct binder_alloc *alloc);
/**
* binder_alloc_get_free_async_space() - get free space available for async
* @alloc: binder_alloc for this proc
*
* Return: the bytes remaining in the address-space for async transactions
*/
static inline size_t
binder_alloc_get_free_async_space(struct binder_alloc *alloc)
{
size_t free_async_space;
mutex_lock(&alloc->mutex);
free_async_space = alloc->free_async_space;
mutex_unlock(&alloc->mutex);
return free_async_space;
}
/**
* binder_alloc_get_user_buffer_offset() - get offset between kernel/user addrs
* @alloc: binder_alloc for this proc
*
* Return: the offset between kernel and user-space addresses to use for
* virtual address conversion
*/
static inline ptrdiff_t
binder_alloc_get_user_buffer_offset(struct binder_alloc *alloc)
{
/*
* user_buffer_offset is constant if vma is set and
* undefined if vma is not set. It is possible to
* get here with !alloc->vma if the target process
* is dying while a transaction is being initiated.
* Returning the old value is ok in this case and
* the transaction will fail.
*/
return alloc->user_buffer_offset;
}
#endif /* _LINUX_BINDER_ALLOC_H */

310
drivers/android/binder_alloc_selftest.c Normal file
View File

@ -0,0 +1,310 @@
/* binder_alloc_selftest.c
*
* Android IPC Subsystem
*
* Copyright (C) 2017 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/mm_types.h>
#include <linux/err.h>
#include "binder_alloc.h"
#define BUFFER_NUM 5
#define BUFFER_MIN_SIZE (PAGE_SIZE / 8)
static bool binder_selftest_run = true;
static int binder_selftest_failures;
static DEFINE_MUTEX(binder_selftest_lock);
/**
* enum buf_end_align_type - Page alignment of a buffer
* end with regard to the end of the previous buffer.
*
* In the pictures below, buf2 refers to the buffer we
* are aligning. buf1 refers to previous buffer by addr.
* Symbol [ means the start of a buffer, ] means the end
* of a buffer, and | means page boundaries.
*/
enum buf_end_align_type {
/**
* @SAME_PAGE_UNALIGNED: The end of this buffer is on
* the same page as the end of the previous buffer and
* is not page aligned. Examples:
* buf1 ][ buf2 ][ ...
* buf1 ]|[ buf2 ][ ...
*/
SAME_PAGE_UNALIGNED = 0,
/**
* @SAME_PAGE_ALIGNED: When the end of the previous buffer
* is not page aligned, the end of this buffer is on the
* same page as the end of the previous buffer and is page
* aligned. When the previous buffer is page aligned, the
* end of this buffer is aligned to the next page boundary.
* Examples:
* buf1 ][ buf2 ]| ...
* buf1 ]|[ buf2 ]| ...
*/
SAME_PAGE_ALIGNED,
/**
* @NEXT_PAGE_UNALIGNED: The end of this buffer is on
* the page next to the end of the previous buffer and
* is not page aligned. Examples:
* buf1 ][ buf2 | buf2 ][ ...
* buf1 ]|[ buf2 | buf2 ][ ...
*/
NEXT_PAGE_UNALIGNED,
/**
* @NEXT_PAGE_ALIGNED: The end of this buffer is on
* the page next to the end of the previous buffer and
* is page aligned. Examples:
* buf1 ][ buf2 | buf2 ]| ...
* buf1 ]|[ buf2 | buf2 ]| ...
*/
NEXT_PAGE_ALIGNED,
/**
* @NEXT_NEXT_UNALIGNED: The end of this buffer is on
* the page that follows the page after the end of the
* previous buffer and is not page aligned. Examples:
* buf1 ][ buf2 | buf2 | buf2 ][ ...
* buf1 ]|[ buf2 | buf2 | buf2 ][ ...
*/
NEXT_NEXT_UNALIGNED,
LOOP_END,
};
static void pr_err_size_seq(size_t *sizes, int *seq)
{
int i;
pr_err("alloc sizes: ");
for (i = 0; i < BUFFER_NUM; i++)
pr_cont("[%zu]", sizes[i]);
pr_cont("\n");
pr_err("free seq: ");
for (i = 0; i < BUFFER_NUM; i++)
pr_cont("[%d]", seq[i]);
pr_cont("\n");
}
static bool check_buffer_pages_allocated(struct binder_alloc *alloc,
struct binder_buffer *buffer,
size_t size)
{
void *page_addr, *end;
int page_index;
end = (void *)PAGE_ALIGN((uintptr_t)buffer->data + size);
page_addr = buffer->data;
for (; page_addr < end; page_addr += PAGE_SIZE) {
page_index = (page_addr - alloc->buffer) / PAGE_SIZE;
if (!alloc->pages[page_index].page_ptr ||
!list_empty(&alloc->pages[page_index].lru)) {
pr_err("expect alloc but is %s at page index %d\n",
alloc->pages[page_index].page_ptr ?
"lru" : "free", page_index);
return false;
}
}
return true;
}
static void binder_selftest_alloc_buf(struct binder_alloc *alloc,
struct binder_buffer *buffers[],
size_t *sizes, int *seq)
{
int i;
for (i = 0; i < BUFFER_NUM; i++) {
buffers[i] = binder_alloc_new_buf(alloc, sizes[i], 0, 0, 0);
if (IS_ERR(buffers[i]) ||
!check_buffer_pages_allocated(alloc, buffers[i],
sizes[i])) {
pr_err_size_seq(sizes, seq);
binder_selftest_failures++;
}
}
}
static void binder_selftest_free_buf(struct binder_alloc *alloc,
struct binder_buffer *buffers[],
size_t *sizes, int *seq, size_t end)
{
int i;
for (i = 0; i < BUFFER_NUM; i++)
binder_alloc_free_buf(alloc, buffers[seq[i]]);
for (i = 0; i < end / PAGE_SIZE; i++) {
/**
* Error message on a free page can be false positive
* if binder shrinker ran during binder_alloc_free_buf
* calls above.
*/
if (list_empty(&alloc->pages[i].lru)) {
pr_err_size_seq(sizes, seq);
pr_err("expect lru but is %s at page index %d\n",
alloc->pages[i].page_ptr ? "alloc" : "free", i);
binder_selftest_failures++;
}
}
}
static void binder_selftest_free_page(struct binder_alloc *alloc)
{
int i;
unsigned long count;
while ((count = list_lru_count(&binder_alloc_lru))) {
list_lru_walk(&binder_alloc_lru, binder_alloc_free_page,
NULL, count);
}
for (i = 0; i < (alloc->buffer_size / PAGE_SIZE); i++) {
if (alloc->pages[i].page_ptr) {
pr_err("expect free but is %s at page index %d\n",
list_empty(&alloc->pages[i].lru) ?
"alloc" : "lru", i);
binder_selftest_failures++;
}
}
}
static void binder_selftest_alloc_free(struct binder_alloc *alloc,
size_t *sizes, int *seq, size_t end)
{
struct binder_buffer *buffers[BUFFER_NUM];
binder_selftest_alloc_buf(alloc, buffers, sizes, seq);
binder_selftest_free_buf(alloc, buffers, sizes, seq, end);
/* Allocate from lru. */
binder_selftest_alloc_buf(alloc, buffers, sizes, seq);
if (list_lru_count(&binder_alloc_lru))
pr_err("lru list should be empty but is not\n");
binder_selftest_free_buf(alloc, buffers, sizes, seq, end);
binder_selftest_free_page(alloc);
}
static bool is_dup(int *seq, int index, int val)
{
int i;
for (i = 0; i < index; i++) {
if (seq[i] == val)
return true;
}
return false;
}
/* Generate BUFFER_NUM factorial free orders. */
static void binder_selftest_free_seq(struct binder_alloc *alloc,
size_t *sizes, int *seq,
int index, size_t end)
{
int i;
if (index == BUFFER_NUM) {
binder_selftest_alloc_free(alloc, sizes, seq, end);
return;
}
for (i = 0; i < BUFFER_NUM; i++) {
if (is_dup(seq, index, i))
continue;
seq[index] = i;
binder_selftest_free_seq(alloc, sizes, seq, index + 1, end);
}
}
static void binder_selftest_alloc_size(struct binder_alloc *alloc,
size_t *end_offset)
{
int i;
int seq[BUFFER_NUM] = {0};
size_t front_sizes[BUFFER_NUM];
size_t back_sizes[BUFFER_NUM];
size_t last_offset, offset = 0;
for (i = 0; i < BUFFER_NUM; i++) {
last_offset = offset;
offset = end_offset[i];
front_sizes[i] = offset - last_offset;
back_sizes[BUFFER_NUM - i - 1] = front_sizes[i];
}
/*
* Buffers share the first or last few pages.
* Only BUFFER_NUM - 1 buffer sizes are adjustable since
* we need one giant buffer before getting to the last page.
*/
back_sizes[0] += alloc->buffer_size - end_offset[BUFFER_NUM - 1];
binder_selftest_free_seq(alloc, front_sizes, seq, 0,
end_offset[BUFFER_NUM - 1]);
binder_selftest_free_seq(alloc, back_sizes, seq, 0, alloc->buffer_size);
}
static void binder_selftest_alloc_offset(struct binder_alloc *alloc,
size_t *end_offset, int index)
{
int align;
size_t end, prev;
if (index == BUFFER_NUM) {
binder_selftest_alloc_size(alloc, end_offset);
return;
}
prev = index == 0 ? 0 : end_offset[index - 1];
end = prev;
BUILD_BUG_ON(BUFFER_MIN_SIZE * BUFFER_NUM >= PAGE_SIZE);
for (align = SAME_PAGE_UNALIGNED; align < LOOP_END; align++) {
if (align % 2)
end = ALIGN(end, PAGE_SIZE);
else
end += BUFFER_MIN_SIZE;
end_offset[index] = end;
binder_selftest_alloc_offset(alloc, end_offset, index + 1);
}
}
/**
* binder_selftest_alloc() - Test alloc and free of buffer pages.
* @alloc: Pointer to alloc struct.
*
* Allocate BUFFER_NUM buffers to cover all page alignment cases,
* then free them in all orders possible. Check that pages are
* correctly allocated, put onto lru when buffers are freed, and
* are freed when binder_alloc_free_page is called.
*/
void binder_selftest_alloc(struct binder_alloc *alloc)
{
size_t end_offset[BUFFER_NUM];
if (!binder_selftest_run)
return;
mutex_lock(&binder_selftest_lock);
if (!binder_selftest_run || !alloc->vma)
goto done;
pr_info("STARTED\n");
binder_selftest_alloc_offset(alloc, end_offset, 0);
binder_selftest_run = false;
if (binder_selftest_failures > 0)
pr_info("%d tests FAILED\n", binder_selftest_failures);
else
pr_info("PASSED\n");
done:
mutex_unlock(&binder_selftest_lock);
}

96
drivers/android/binder_trace.h
View File

@ -23,7 +23,8 @@
struct binder_buffer;
struct binder_node;
struct binder_proc;
struct binder_ref;
struct binder_alloc;
struct binder_ref_data;
struct binder_thread;
struct binder_transaction;
@ -146,8 +147,8 @@ TRACE_EVENT(binder_transaction_received,
TRACE_EVENT(binder_transaction_node_to_ref,
TP_PROTO(struct binder_transaction *t, struct binder_node *node,
struct binder_ref *ref),
TP_ARGS(t, node, ref),
struct binder_ref_data *rdata),
TP_ARGS(t, node, rdata),
TP_STRUCT__entry(
__field(int, debug_id)
@ -160,8 +161,8 @@ TRACE_EVENT(binder_transaction_node_to_ref,
__entry->debug_id = t->debug_id;
__entry->node_debug_id = node->debug_id;
__entry->node_ptr = node->ptr;
__entry->ref_debug_id = ref->debug_id;
__entry->ref_desc = ref->desc;
__entry->ref_debug_id = rdata->debug_id;
__entry->ref_desc = rdata->desc;
),
TP_printk("transaction=%d node=%d src_ptr=0x%016llx ==> dest_ref=%d dest_desc=%d",
__entry->debug_id, __entry->node_debug_id,
@ -170,8 +171,9 @@ TRACE_EVENT(binder_transaction_node_to_ref,
);
TRACE_EVENT(binder_transaction_ref_to_node,
TP_PROTO(struct binder_transaction *t, struct binder_ref *ref),
TP_ARGS(t, ref),
TP_PROTO(struct binder_transaction *t, struct binder_node *node,
struct binder_ref_data *rdata),
TP_ARGS(t, node, rdata),
TP_STRUCT__entry(
__field(int, debug_id)
@ -182,10 +184,10 @@ TRACE_EVENT(binder_transaction_ref_to_node,
),
TP_fast_assign(
__entry->debug_id = t->debug_id;
__entry->ref_debug_id = ref->debug_id;
__entry->ref_desc = ref->desc;
__entry->node_debug_id = ref->node->debug_id;
__entry->node_ptr = ref->node->ptr;
__entry->ref_debug_id = rdata->debug_id;
__entry->ref_desc = rdata->desc;
__entry->node_debug_id = node->debug_id;
__entry->node_ptr = node->ptr;
),
TP_printk("transaction=%d node=%d src_ref=%d src_desc=%d ==> dest_ptr=0x%016llx",
__entry->debug_id, __entry->node_debug_id,
@ -194,9 +196,10 @@ TRACE_EVENT(binder_transaction_ref_to_node,
);
TRACE_EVENT(binder_transaction_ref_to_ref,
TP_PROTO(struct binder_transaction *t, struct binder_ref *src_ref,
struct binder_ref *dest_ref),
TP_ARGS(t, src_ref, dest_ref),
TP_PROTO(struct binder_transaction *t, struct binder_node *node,
struct binder_ref_data *src_ref,
struct binder_ref_data *dest_ref),
TP_ARGS(t, node, src_ref, dest_ref),
TP_STRUCT__entry(
__field(int, debug_id)
@ -208,7 +211,7 @@ TRACE_EVENT(binder_transaction_ref_to_ref,
),
TP_fast_assign(
__entry->debug_id = t->debug_id;
__entry->node_debug_id = src_ref->node->debug_id;
__entry->node_debug_id = node->debug_id;
__entry->src_ref_debug_id = src_ref->debug_id;
__entry->src_ref_desc = src_ref->desc;
__entry->dest_ref_debug_id = dest_ref->debug_id;
@ -268,9 +271,9 @@ DEFINE_EVENT(binder_buffer_class, binder_transaction_failed_buffer_release,
TP_ARGS(buffer));
TRACE_EVENT(binder_update_page_range,
TP_PROTO(struct binder_proc *proc, bool allocate,
TP_PROTO(struct binder_alloc *alloc, bool allocate,
void *start, void *end),
TP_ARGS(proc, allocate, start, end),
TP_ARGS(alloc, allocate, start, end),
TP_STRUCT__entry(
__field(int, proc)
__field(bool, allocate)
@ -278,9 +281,9 @@ TRACE_EVENT(binder_update_page_range,
__field(size_t, size)
),
TP_fast_assign(
__entry->proc = proc->pid;
__entry->proc = alloc->pid;
__entry->allocate = allocate;
__entry->offset = start - proc->buffer;
__entry->offset = start - alloc->buffer;
__entry->size = end - start;
),
TP_printk("proc=%d allocate=%d offset=%zu size=%zu",
@ -288,6 +291,61 @@ TRACE_EVENT(binder_update_page_range,
__entry->offset, __entry->size)
);
DECLARE_EVENT_CLASS(binder_lru_page_class,
TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
TP_ARGS(alloc, page_index),
TP_STRUCT__entry(
__field(int, proc)
__field(size_t, page_index)
),
TP_fast_assign(
__entry->proc = alloc->pid;
__entry->page_index = page_index;
),
TP_printk("proc=%d page_index=%zu",
__entry->proc, __entry->page_index)
);
DEFINE_EVENT(binder_lru_page_class, binder_alloc_lru_start,
TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
TP_ARGS(alloc, page_index));
DEFINE_EVENT(binder_lru_page_class, binder_alloc_lru_end,
TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
TP_ARGS(alloc, page_index));
DEFINE_EVENT(binder_lru_page_class, binder_free_lru_start,
TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
TP_ARGS(alloc, page_index));
DEFINE_EVENT(binder_lru_page_class, binder_free_lru_end,
TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
TP_ARGS(alloc, page_index));
DEFINE_EVENT(binder_lru_page_class, binder_alloc_page_start,
TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
TP_ARGS(alloc, page_index));
DEFINE_EVENT(binder_lru_page_class, binder_alloc_page_end,
TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
TP_ARGS(alloc, page_index));
DEFINE_EVENT(binder_lru_page_class, binder_unmap_user_start,
TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
TP_ARGS(alloc, page_index));
DEFINE_EVENT(binder_lru_page_class, binder_unmap_user_end,
TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
TP_ARGS(alloc, page_index));
DEFINE_EVENT(binder_lru_page_class, binder_unmap_kernel_start,
TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
TP_ARGS(alloc, page_index));
DEFINE_EVENT(binder_lru_page_class, binder_unmap_kernel_end,
TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
TP_ARGS(alloc, page_index));
TRACE_EVENT(binder_command,
TP_PROTO(uint32_t cmd),
TP_ARGS(cmd),

6
drivers/auxdisplay/panel.c
View File

@ -877,21 +877,21 @@ static void lcd_clear_fast_tilcd(struct charlcd *charlcd)
spin_unlock_irq(&pprt_lock);
}
static struct charlcd_ops charlcd_serial_ops = {
static const struct charlcd_ops charlcd_serial_ops = {
.write_cmd = lcd_write_cmd_s,
.write_data = lcd_write_data_s,
.clear_fast = lcd_clear_fast_s,
.backlight = lcd_backlight,
};
static struct charlcd_ops charlcd_parallel_ops = {
static const struct charlcd_ops charlcd_parallel_ops = {
.write_cmd = lcd_write_cmd_p8,
.write_data = lcd_write_data_p8,
.clear_fast = lcd_clear_fast_p8,
.backlight = lcd_backlight,
};
static struct charlcd_ops charlcd_tilcd_ops = {
static const struct charlcd_ops charlcd_tilcd_ops = {
.write_cmd = lcd_write_cmd_tilcd,
.write_data = lcd_write_data_tilcd,
.clear_fast = lcd_clear_fast_tilcd,

2
drivers/char/applicom.c
View File

@ -67,7 +67,7 @@ static char *applicom_pci_devnames[] = {
"PCI2000PFB"
};
static struct pci_device_id applicom_pci_tbl[] = {
static const struct pci_device_id applicom_pci_tbl[] = {
{ PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC) },
{ PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN) },
{ PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB) },

46
drivers/char/mwave/smapi.c
View File

@ -128,10 +128,11 @@ int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings)
{
int bRC = -EIO;
unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
unsigned short ausDspBases[] = { 0x0030, 0x4E30, 0x8E30, 0xCE30, 0x0130, 0x0350, 0x0070, 0x0DB0 };
unsigned short ausUartBases[] = { 0x03F8, 0x02F8, 0x03E8, 0x02E8 };
unsigned short numDspBases = 8;
unsigned short numUartBases = 4;
static const unsigned short ausDspBases[] = {
0x0030, 0x4E30, 0x8E30, 0xCE30,
0x0130, 0x0350, 0x0070, 0x0DB0 };
static const unsigned short ausUartBases[] = {
0x03F8, 0x02F8, 0x03E8, 0x02E8 };
PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg entry\n");
@ -148,7 +149,7 @@ int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings)
pSettings->bDSPEnabled = ((usCX & 0x0001) != 0);
pSettings->usDspIRQ = usSI & 0x00FF;
pSettings->usDspDMA = (usSI & 0xFF00) >> 8;
if ((usDI & 0x00FF) < numDspBases) {
if ((usDI & 0x00FF) < ARRAY_SIZE(ausDspBases)) {
pSettings->usDspBaseIO = ausDspBases[usDI & 0x00FF];
} else {
pSettings->usDspBaseIO = 0;
@ -176,7 +177,7 @@ int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings)
pSettings->bModemEnabled = ((usCX & 0x0001) != 0);
pSettings->usUartIRQ = usSI & 0x000F;
if (((usSI & 0xFF00) >> 8) < numUartBases) {
if (((usSI & 0xFF00) >> 8) < ARRAY_SIZE(ausUartBases)) {
pSettings->usUartBaseIO = ausUartBases[(usSI & 0xFF00) >> 8];
} else {
pSettings->usUartBaseIO = 0;
@ -205,15 +206,16 @@ int smapi_set_DSP_cfg(void)
int bRC = -EIO;
int i;
unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
unsigned short ausDspBases[] = { 0x0030, 0x4E30, 0x8E30, 0xCE30, 0x0130, 0x0350, 0x0070, 0x0DB0 };
unsigned short ausUartBases[] = { 0x03F8, 0x02F8, 0x03E8, 0x02E8 };
unsigned short ausDspIrqs[] = { 5, 7, 10, 11, 15 };
unsigned short ausUartIrqs[] = { 3, 4 };
static const unsigned short ausDspBases[] = {
0x0030, 0x4E30, 0x8E30, 0xCE30,
0x0130, 0x0350, 0x0070, 0x0DB0 };
static const unsigned short ausUartBases[] = {
0x03F8, 0x02F8, 0x03E8, 0x02E8 };
static const unsigned short ausDspIrqs[] = {
5, 7, 10, 11, 15 };
static const unsigned short ausUartIrqs[] = {
3, 4 };
unsigned short numDspBases = 8;
unsigned short numUartBases = 4;
unsigned short numDspIrqs = 5;
unsigned short numUartIrqs = 2;
unsigned short dspio_index = 0, uartio_index = 0;
PRINTK_5(TRACE_SMAPI,
@ -221,11 +223,11 @@ int smapi_set_DSP_cfg(void)
mwave_3780i_irq, mwave_3780i_io, mwave_uart_irq, mwave_uart_io);
if (mwave_3780i_io) {
for (i = 0; i < numDspBases; i++) {
for (i = 0; i < ARRAY_SIZE(ausDspBases); i++) {
if (mwave_3780i_io == ausDspBases[i])
break;
}
if (i == numDspBases) {
if (i == ARRAY_SIZE(ausDspBases)) {
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_io address %x. Aborting.\n", mwave_3780i_io);
return bRC;
}
@ -233,22 +235,22 @@ int smapi_set_DSP_cfg(void)
}
if (mwave_3780i_irq) {
for (i = 0; i < numDspIrqs; i++) {
for (i = 0; i < ARRAY_SIZE(ausDspIrqs); i++) {
if (mwave_3780i_irq == ausDspIrqs[i])
break;
}
if (i == numDspIrqs) {
if (i == ARRAY_SIZE(ausDspIrqs)) {
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_irq %x. Aborting.\n", mwave_3780i_irq);
return bRC;
}
}
if (mwave_uart_io) {
for (i = 0; i < numUartBases; i++) {
for (i = 0; i < ARRAY_SIZE(ausUartBases); i++) {
if (mwave_uart_io == ausUartBases[i])
break;
}
if (i == numUartBases) {
if (i == ARRAY_SIZE(ausUartBases)) {
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_io address %x. Aborting.\n", mwave_uart_io);
return bRC;
}
@ -257,11 +259,11 @@ int smapi_set_DSP_cfg(void)
if (mwave_uart_irq) {
for (i = 0; i < numUartIrqs; i++) {
for (i = 0; i < ARRAY_SIZE(ausUartIrqs); i++) {
if (mwave_uart_irq == ausUartIrqs[i])
break;
}
if (i == numUartIrqs) {
if (i == ARRAY_SIZE(ausUartIrqs)) {
PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_irq %x. Aborting.\n", mwave_uart_irq);
return bRC;
}

3
drivers/char/ppdev.c
View File

@ -101,9 +101,6 @@ static DEFINE_IDA(ida_index);
#define PP_BUFFER_SIZE 1024
#define PARDEVICE_MAX 8
/* ROUND_UP macro from fs/select.c */
#define ROUND_UP(x,y) (((x)+(y)-1)/(y))
static DEFINE_MUTEX(pp_do_mutex);
/* define fixed sized ioctl cmd for y2038 migration */

2
drivers/char/tlclk.c
View File

@ -766,7 +766,7 @@ static struct attribute *tlclk_sysfs_entries[] = {
NULL
};
static struct attribute_group tlclk_attribute_group = {
static const struct attribute_group tlclk_attribute_group = {
.name = NULL, /* put in device directory */
.attrs = tlclk_sysfs_entries,
};

2
drivers/char/virtio_console.c
View File

@ -1308,7 +1308,7 @@ static struct attribute *port_sysfs_entries[] = {
NULL
};
static struct attribute_group port_attribute_group = {
static const struct attribute_group port_attribute_group = {
.name = NULL, /* put in device directory */
.attrs = port_sysfs_entries,
};

39
drivers/char/xilinx_hwicap/xilinx_hwicap.c
View File

@ -86,8 +86,7 @@
#include <linux/cdev.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <asm/io.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#ifdef CONFIG_OF
@ -222,6 +221,8 @@ static const struct config_registers v6_config_registers = {
* hwicap_command_desync - Send a DESYNC command to the ICAP port.
* @drvdata: a pointer to the drvdata.
*
* Returns: '0' on success and failure value on error
*
* This command desynchronizes the ICAP After this command, a
* bitstream containing a NULL packet, followed by a SYNCH packet is
* required before the ICAP will recognize commands.
@ -251,10 +252,12 @@ static int hwicap_command_desync(struct hwicap_drvdata *drvdata)
* hwicap_get_configuration_register - Query a configuration register.
* @drvdata: a pointer to the drvdata.
* @reg: a constant which represents the configuration
* register value to be returned.
* Examples: XHI_IDCODE, XHI_FLR.
* register value to be returned.
* Examples: XHI_IDCODE, XHI_FLR.
* @reg_data: returns the value of the register.
*
* Returns: '0' on success and failure value on error
*
* Sends a query packet to the ICAP and then receives the response.
* The icap is left in Synched state.
*/
@ -320,7 +323,8 @@ static int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
dev_dbg(drvdata->dev, "initializing\n");
/* Abort any current transaction, to make sure we have the
* ICAP in a good state. */
* ICAP in a good state.
*/
dev_dbg(drvdata->dev, "Reset...\n");
drvdata->config->reset(drvdata);
@ -632,7 +636,6 @@ static int hwicap_setup(struct device *dev, int id,
drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
if (!drvdata) {
dev_err(dev, "Couldn't allocate device private record\n");
retval = -ENOMEM;
goto failed0;
}
@ -759,20 +762,20 @@ static int hwicap_of_probe(struct platform_device *op,
id = of_get_property(op->dev.of_node, "port-number", NULL);
/* It's most likely that we're using V4, if the family is not
specified */
* specified
*/
regs = &v4_config_registers;
family = of_get_property(op->dev.of_node, "xlnx,family", NULL);
if (family) {
if (!strcmp(family, "virtex2p")) {
if (!strcmp(family, "virtex2p"))
regs = &v2_config_registers;
} else if (!strcmp(family, "virtex4")) {
else if (!strcmp(family, "virtex4"))
regs = &v4_config_registers;
} else if (!strcmp(family, "virtex5")) {
else if (!strcmp(family, "virtex5"))
regs = &v5_config_registers;
} else if (!strcmp(family, "virtex6")) {
else if (!strcmp(family, "virtex6"))
regs = &v6_config_registers;
}
}
return hwicap_setup(&op->dev, id ? *id : -1, &res, config,
regs);
@ -802,20 +805,20 @@ static int hwicap_drv_probe(struct platform_device *pdev)
return -ENODEV;
/* It's most likely that we're using V4, if the family is not
specified */
* specified
*/
regs = &v4_config_registers;
family = pdev->dev.platform_data;
if (family) {
if (!strcmp(family, "virtex2p")) {
if (!strcmp(family, "virtex2p"))
regs = &v2_config_registers;
} else if (!strcmp(family, "virtex4")) {
else if (!strcmp(family, "virtex4"))
regs = &v4_config_registers;
} else if (!strcmp(family, "virtex5")) {
else if (!strcmp(family, "virtex5"))
regs = &v5_config_registers;
} else if (!strcmp(family, "virtex6")) {
else if (!strcmp(family, "virtex6"))
regs = &v6_config_registers;
}
}
return hwicap_setup(&pdev->dev, pdev->id, res,

13
drivers/char/xilinx_hwicap/xilinx_hwicap.h
View File

@ -62,11 +62,13 @@ struct hwicap_drvdata {
struct hwicap_driver_config {
/* Read configuration data given by size into the data buffer.
Return 0 if successful. */
* Return 0 if successful.
*/
int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
u32 size);
/* Write configuration data given by size from the data buffer.
Return 0 if successful. */
* Return 0 if successful.
*/
int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
u32 size);
/* Get the status register, bit pattern given by:
@ -193,11 +195,12 @@ struct config_registers {
* hwicap_type_1_read - Generates a Type 1 read packet header.
* @reg: is the address of the register to be read back.
*
* Return:
* Generates a Type 1 read packet header, which is used to indirectly
* read registers in the configuration logic. This packet must then
* be sent through the icap device, and a return packet received with
* the information.
**/
*/
static inline u32 hwicap_type_1_read(u32 reg)
{
return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
@ -208,7 +211,9 @@ static inline u32 hwicap_type_1_read(u32 reg)
/**
* hwicap_type_1_write - Generates a Type 1 write packet header
* @reg: is the address of the register to be read back.
**/
*
* Return: Type 1 write packet header
*/
static inline u32 hwicap_type_1_write(u32 reg)
{
return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |

7
drivers/extcon/Kconfig
View File

@ -150,4 +150,11 @@ config EXTCON_USB_GPIO
Say Y here to enable GPIO based USB cable detection extcon support.
Used typically if GPIO is used for USB ID pin detection.
config EXTCON_USBC_CROS_EC
tristate "ChromeOS Embedded Controller EXTCON support"
depends on MFD_CROS_EC
help
Say Y here to enable USB Type C cable detection extcon support when
using Chrome OS EC based USB Type-C ports.
endif

1
drivers/extcon/Makefile
View File

@ -20,3 +20,4 @@ obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += extcon-qcom-spmi-misc.o
obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o
obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o
obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o
obj-$(CONFIG_EXTCON_USBC_CROS_EC) += extcon-usbc-cros-ec.o

50
drivers/extcon/devres.c
View File

@ -1,5 +1,5 @@
/*
* drivers/extcon/devres.c - EXTCON device's resource management
* drivers/extcon/devres.c - EXTCON device's resource management
*
* Copyright (C) 2016 Samsung Electronics
* Author: Chanwoo Choi <cw00.choi@samsung.com>
@ -59,10 +59,9 @@ static void devm_extcon_dev_notifier_all_unreg(struct device *dev, void *res)
/**
* devm_extcon_dev_allocate - Allocate managed extcon device
* @dev: device owning the extcon device being created
* @supported_cable: Array of supported extcon ending with EXTCON_NONE.
* If supported_cable is NULL, cable name related APIs
* are disabled.
* @dev: the device owning the extcon device being created
* @supported_cable: the array of the supported external connectors
* ending with EXTCON_NONE.
*
* This function manages automatically the memory of extcon device using device
* resource management and simplify the control of freeing the memory of extcon
@ -97,8 +96,8 @@ EXPORT_SYMBOL_GPL(devm_extcon_dev_allocate);
/**
* devm_extcon_dev_free() - Resource-managed extcon_dev_unregister()
* @dev: device the extcon belongs to
* @edev: the extcon device to unregister
* @dev: the device owning the extcon device being created
* @edev: the extcon device to be freed
*
* Free the memory that is allocated with devm_extcon_dev_allocate()
* function.
@ -112,10 +111,9 @@ EXPORT_SYMBOL_GPL(devm_extcon_dev_free);
/**
* devm_extcon_dev_register() - Resource-managed extcon_dev_register()
* @dev: device to allocate extcon device
* @edev: the new extcon device to register
* @dev: the device owning the extcon device being created
* @edev: the extcon device to be registered
*
* Managed extcon_dev_register() function. If extcon device is attached with
* this function, that extcon device is automatically unregistered on driver
* detach. Internally this function calls extcon_dev_register() function.
* To get more information, refer that function.
@ -149,8 +147,8 @@ EXPORT_SYMBOL_GPL(devm_extcon_dev_register);
/**
* devm_extcon_dev_unregister() - Resource-managed extcon_dev_unregister()
* @dev: device the extcon belongs to
* @edev: the extcon device to unregister
* @dev: the device owning the extcon device being created
* @edev: the extcon device to unregistered
*
* Unregister extcon device that is registered with devm_extcon_dev_register()
* function.
@ -164,10 +162,10 @@ EXPORT_SYMBOL_GPL(devm_extcon_dev_unregister);
/**
* devm_extcon_register_notifier() - Resource-managed extcon_register_notifier()
* @dev: device to allocate extcon device
* @edev: the extcon device that has the external connecotr.
* @id: the unique id of each external connector in extcon enumeration.
* @nb: a notifier block to be registered.
* @dev: the device owning the extcon device being created
* @edev: the extcon device
* @id: the unique id among the extcon enumeration
* @nb: a notifier block to be registered
*
* This function manages automatically the notifier of extcon device using
* device resource management and simplify the control of unregistering
@ -208,10 +206,10 @@ EXPORT_SYMBOL(devm_extcon_register_notifier);
/**
* devm_extcon_unregister_notifier()
- Resource-managed extcon_unregister_notifier()
* @dev: device to allocate extcon device
* @edev: the extcon device that has the external connecotr.
* @id: the unique id of each external connector in extcon enumeration.
* @nb: a notifier block to be registered.
* @dev: the device owning the extcon device being created
* @edev: the extcon device
* @id: the unique id among the extcon enumeration
* @nb: a notifier block to be registered
*/
void devm_extcon_unregister_notifier(struct device *dev,
struct extcon_dev *edev, unsigned int id,
@ -225,9 +223,9 @@ EXPORT_SYMBOL(devm_extcon_unregister_notifier);
/**
* devm_extcon_register_notifier_all()
* - Resource-managed extcon_register_notifier_all()
* @dev: device to allocate extcon device
* @edev: the extcon device that has the external connecotr.
* @nb: a notifier block to be registered.
* @dev: the device owning the extcon device being created
* @edev: the extcon device
* @nb: a notifier block to be registered
*
* This function manages automatically the notifier of extcon device using
* device resource management and simplify the control of unregistering
@ -263,9 +261,9 @@ EXPORT_SYMBOL(devm_extcon_register_notifier_all);
/**
* devm_extcon_unregister_notifier_all()
* - Resource-managed extcon_unregister_notifier_all()
* @dev: device to allocate extcon device
* @edev: the extcon device that has the external connecotr.
* @nb: a notifier block to be registered.
* @dev: the device owning the extcon device being created
* @edev: the extcon device
* @nb: a notifier block to be registered
*/
void devm_extcon_unregister_notifier_all(struct device *dev,
struct extcon_dev *edev,

2
drivers/extcon/extcon-intel-int3496.c
View File

@ -171,7 +171,7 @@ static int int3496_remove(struct platform_device *pdev)
return 0;
}
static struct acpi_device_id int3496_acpi_match[] = {
static const struct acpi_device_id int3496_acpi_match[] = {
{ "INT3496" },
{ }
};

5
drivers/extcon/extcon-max77693.c
View File

@ -811,9 +811,8 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
*/
extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
attached);
if (!cable_attached)
extcon_set_state_sync(info->edev,
EXTCON_DISP_MHL, cable_attached);
extcon_set_state_sync(info->edev, EXTCON_DISP_MHL,
cable_attached);
break;
}

417
drivers/extcon/extcon-usbc-cros-ec.c Normal file
View File

@ -0,0 +1,417 @@
/**
* drivers/extcon/extcon-usbc-cros-ec - ChromeOS Embedded Controller extcon
*
* Copyright (C) 2017 Google, Inc
* Author: Benson Leung <bleung@chromium.org>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/extcon.h>
#include <linux/kernel.h>
#include <linux/mfd/cros_ec.h>
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/sched.h>
struct cros_ec_extcon_info {
struct device *dev;
struct extcon_dev *edev;
int port_id;
struct cros_ec_device *ec;
struct notifier_block notifier;
bool dp; /* DisplayPort enabled */
bool mux; /* SuperSpeed (usb3) enabled */
unsigned int power_type;
};
static const unsigned int usb_type_c_cable[] = {
EXTCON_DISP_DP,
EXTCON_NONE,
};
/**
* cros_ec_pd_command() - Send a command to the EC.
* @info: pointer to struct cros_ec_extcon_info
* @command: EC command
* @version: EC command version
* @outdata: EC command output data
* @outsize: Size of outdata
* @indata: EC command input data
* @insize: Size of indata
*
* Return: 0 on success, <0 on failure.
*/
static int cros_ec_pd_command(struct cros_ec_extcon_info *info,
unsigned int command,
unsigned int version,
void *outdata,
unsigned int outsize,
void *indata,
unsigned int insize)
{
struct cros_ec_command *msg;
int ret;
msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
if (!msg)
return -ENOMEM;
msg->version = version;
msg->command = command;
msg->outsize = outsize;
msg->insize = insize;
if (outsize)
memcpy(msg->data, outdata, outsize);
ret = cros_ec_cmd_xfer_status(info->ec, msg);
if (ret >= 0 && insize)
memcpy(indata, msg->data, insize);
kfree(msg);
return ret;
}
/**
* cros_ec_usb_get_power_type() - Get power type info about PD device attached
* to given port.
* @info: pointer to struct cros_ec_extcon_info
*
* Return: power type on success, <0 on failure.
*/
static int cros_ec_usb_get_power_type(struct cros_ec_extcon_info *info)
{
struct ec_params_usb_pd_power_info req;
struct ec_response_usb_pd_power_info resp;
int ret;
req.port = info->port_id;
ret = cros_ec_pd_command(info, EC_CMD_USB_PD_POWER_INFO, 0,
&req, sizeof(req), &resp, sizeof(resp));
if (ret < 0)
return ret;
return resp.type;
}
/**
* cros_ec_usb_get_pd_mux_state() - Get PD mux state for given port.
* @info: pointer to struct cros_ec_extcon_info
*
* Return: PD mux state on success, <0 on failure.
*/
static int cros_ec_usb_get_pd_mux_state(struct cros_ec_extcon_info *info)
{
struct ec_params_usb_pd_mux_info req;
struct ec_response_usb_pd_mux_info resp;
int ret;
req.port = info->port_id;
ret = cros_ec_pd_command(info, EC_CMD_USB_PD_MUX_INFO, 0,
&req, sizeof(req),
&resp, sizeof(resp));
if (ret < 0)
return ret;
return resp.flags;
}
/**
* cros_ec_usb_get_role() - Get role info about possible PD device attached to a
* given port.
* @info: pointer to struct cros_ec_extcon_info
* @polarity: pointer to cable polarity (return value)
*
* Return: role info on success, -ENOTCONN if no cable is connected, <0 on
* failure.
*/
static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info,
bool *polarity)
{
struct ec_params_usb_pd_control pd_control;
struct ec_response_usb_pd_control_v1 resp;
int ret;
pd_control.port = info->port_id;
pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE;
pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE;
ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1,
&pd_control, sizeof(pd_control),
&resp, sizeof(resp));
if (ret < 0)
return ret;
if (!(resp.enabled & PD_CTRL_RESP_ENABLED_CONNECTED))
return -ENOTCONN;
*polarity = resp.polarity;
return resp.role;
}
/**
* cros_ec_pd_get_num_ports() - Get number of EC charge ports.
* @info: pointer to struct cros_ec_extcon_info
*
* Return: number of ports on success, <0 on failure.
*/
static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info)
{
struct ec_response_usb_pd_ports resp;
int ret;
ret = cros_ec_pd_command(info, EC_CMD_USB_PD_PORTS,
0, NULL, 0, &resp, sizeof(resp));
if (ret < 0)
return ret;
return resp.num_ports;
}
static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
bool force)
{
struct device *dev = info->dev;
int role, power_type;
bool polarity = false;
bool dp = false;
bool mux = false;
bool hpd = false;
power_type = cros_ec_usb_get_power_type(info);
if (power_type < 0) {
dev_err(dev, "failed getting power type err = %d\n",
power_type);
return power_type;
}
role = cros_ec_usb_get_role(info, &polarity);
if (role < 0) {
if (role != -ENOTCONN) {
dev_err(dev, "failed getting role err = %d\n", role);
return role;
}
} else {
int pd_mux_state;
pd_mux_state = cros_ec_usb_get_pd_mux_state(info);
if (pd_mux_state < 0)
pd_mux_state = USB_PD_MUX_USB_ENABLED;
dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
}
if (force || info->dp != dp || info->mux != mux ||
info->power_type != power_type) {
info->dp = dp;
info->mux = mux;
info->power_type = power_type;
extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
extcon_set_property(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_USB_TYPEC_POLARITY,
(union extcon_property_value)(int)polarity);
extcon_set_property(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_USB_SS,
(union extcon_property_value)(int)mux);
extcon_set_property(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_DISP_HPD,
(union extcon_property_value)(int)hpd);
extcon_sync(info->edev, EXTCON_DISP_DP);
} else if (hpd) {
extcon_set_property(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_DISP_HPD,
(union extcon_property_value)(int)hpd);
extcon_sync(info->edev, EXTCON_DISP_DP);
}
return 0;
}
static int extcon_cros_ec_event(struct notifier_block *nb,
unsigned long queued_during_suspend,
void *_notify)
{
struct cros_ec_extcon_info *info;
struct cros_ec_device *ec;
u32 host_event;
info = container_of(nb, struct cros_ec_extcon_info, notifier);
ec = info->ec;
host_event = cros_ec_get_host_event(ec);
if (host_event & (EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) |
EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_MUX))) {
extcon_cros_ec_detect_cable(info, false);
return NOTIFY_OK;
}
return NOTIFY_DONE;
}
static int extcon_cros_ec_probe(struct platform_device *pdev)
{
struct cros_ec_extcon_info *info;
struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
int numports, ret;
info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->dev = dev;
info->ec = ec;
if (np) {
u32 port;
ret = of_property_read_u32(np, "google,usb-port-id", &port);
if (ret < 0) {
dev_err(dev, "Missing google,usb-port-id property\n");
return ret;
}
info->port_id = port;
} else {
info->port_id = pdev->id;
}
numports = cros_ec_pd_get_num_ports(info);
if (numports < 0) {
dev_err(dev, "failed getting number of ports! ret = %d\n",
numports);
return numports;
}
if (info->port_id >= numports) {
dev_err(dev, "This system only supports %d ports\n", numports);
return -ENODEV;
}
info->edev = devm_extcon_dev_allocate(dev, usb_type_c_cable);
if (IS_ERR(info->edev)) {
dev_err(dev, "failed to allocate extcon device\n");
return -ENOMEM;
}
ret = devm_extcon_dev_register(dev, info->edev);
if (ret < 0) {
dev_err(dev, "failed to register extcon device\n");
return ret;
}
extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_USB_TYPEC_POLARITY);
extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_USB_SS);
extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_DISP_HPD);
platform_set_drvdata(pdev, info);
/* Get PD events from the EC */
info->notifier.notifier_call = extcon_cros_ec_event;
ret = blocking_notifier_chain_register(&info->ec->event_notifier,
&info->notifier);
if (ret < 0) {
dev_err(dev, "failed to register notifier\n");
return ret;
}
/* Perform initial detection */
ret = extcon_cros_ec_detect_cable(info, true);
if (ret < 0) {
dev_err(dev, "failed to detect initial cable state\n");
goto unregister_notifier;
}
return 0;
unregister_notifier:
blocking_notifier_chain_unregister(&info->ec->event_notifier,
&info->notifier);
return ret;
}
static int extcon_cros_ec_remove(struct platform_device *pdev)
{
struct cros_ec_extcon_info *info = platform_get_drvdata(pdev);
blocking_notifier_chain_unregister(&info->ec->event_notifier,
&info->notifier);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int extcon_cros_ec_suspend(struct device *dev)
{
return 0;
}
static int extcon_cros_ec_resume(struct device *dev)
{
int ret;
struct cros_ec_extcon_info *info = dev_get_drvdata(dev);
ret = extcon_cros_ec_detect_cable(info, true);
if (ret < 0)
dev_err(dev, "failed to detect cable state on resume\n");
return 0;
}
static const struct dev_pm_ops extcon_cros_ec_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(extcon_cros_ec_suspend, extcon_cros_ec_resume)
};
#define DEV_PM_OPS (&extcon_cros_ec_dev_pm_ops)
#else
#define DEV_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_OF
static const struct of_device_id extcon_cros_ec_of_match[] = {
{ .compatible = "google,extcon-usbc-cros-ec" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, extcon_cros_ec_of_match);
#endif /* CONFIG_OF */
static struct platform_driver extcon_cros_ec_driver = {
.driver = {
.name = "extcon-usbc-cros-ec",
.of_match_table = of_match_ptr(extcon_cros_ec_of_match),
.pm = DEV_PM_OPS,
},
.remove = extcon_cros_ec_remove,
.probe = extcon_cros_ec_probe,
};
module_platform_driver(extcon_cros_ec_driver);
MODULE_DESCRIPTION("ChromeOS Embedded Controller extcon driver");
MODULE_AUTHOR("Benson Leung <bleung@chromium.org>");
MODULE_LICENSE("GPL");

279
drivers/extcon/extcon.c
View File

@ -1,7 +1,5 @@
/*
* drivers/extcon/extcon.c - External Connector (extcon) framework.
*
* External connector (extcon) class driver
* drivers/extcon/extcon.c - External Connector (extcon) framework.
*
* Copyright (C) 2015 Samsung Electronics
* Author: Chanwoo Choi <cw00.choi@samsung.com>
@ -37,7 +35,6 @@
#include "extcon.h"
#define SUPPORTED_CABLE_MAX 32
#define CABLE_NAME_MAX 30
struct __extcon_info {
unsigned int type;
@ -200,13 +197,13 @@ struct __extcon_info {
};
/**
* struct extcon_cable - An internal data for each cable of extcon device.
* @edev: The extcon device
* @cable_index: Index of this cable in the edev
* @attr_g: Attribute group for the cable
* struct extcon_cable - An internal data for an external connector.
* @edev: the extcon device
* @cable_index: the index of this cable in the edev
* @attr_g: the attribute group for the cable
* @attr_name: "name" sysfs entry
* @attr_state: "state" sysfs entry
* @attrs: Array pointing to attr_name and attr_state for attr_g
* @attrs: the array pointing to attr_name and attr_state for attr_g
*/
struct extcon_cable {
struct extcon_dev *edev;
@ -234,15 +231,6 @@ static struct class *extcon_class;
static LIST_HEAD(extcon_dev_list);
static DEFINE_MUTEX(extcon_dev_list_lock);
/**
* check_mutually_exclusive - Check if new_state violates mutually_exclusive
* condition.
* @edev: the extcon device
* @new_state: new cable attach status for @edev
*
* Returns 0 if nothing violates. Returns the index + 1 for the first
* violated condition.
*/
static int check_mutually_exclusive(struct extcon_dev *edev, u32 new_state)
{
int i = 0;
@ -417,11 +405,13 @@ static ssize_t cable_state_show(struct device *dev,
}
/**
* extcon_sync() - Synchronize the states for both the attached/detached
* @edev: the extcon device that has the cable.
* extcon_sync() - Synchronize the state for an external connector.
* @edev: the extcon device
*
* This function send a notification to synchronize the all states of a
* specific external connector
* Note that this function send a notification in order to synchronize
* the state and property of an external connector.
*
* Returns 0 if success or error number if fail.
*/
int extcon_sync(struct extcon_dev *edev, unsigned int id)
{
@ -497,9 +487,11 @@ int extcon_sync(struct extcon_dev *edev, unsigned int id)
EXPORT_SYMBOL_GPL(extcon_sync);
/**
* extcon_get_state() - Get the state of a external connector.
* @edev: the extcon device that has the cable.
* @id: the unique id of each external connector in extcon enumeration.
* extcon_get_state() - Get the state of an external connector.
* @edev: the extcon device
* @id: the unique id indicating an external connector
*
* Returns 0 if success or error number if fail.
*/
int extcon_get_state(struct extcon_dev *edev, const unsigned int id)
{
@ -522,20 +514,19 @@ int extcon_get_state(struct extcon_dev *edev, const unsigned int id)
EXPORT_SYMBOL_GPL(extcon_get_state);
/**
* extcon_set_state() - Set the state of a external connector.
* without a notification.
* @edev: the extcon device that has the cable.
* @id: the unique id of each external connector
* in extcon enumeration.
* @state: the new cable status. The default semantics is
* true: attached / false: detached.
* extcon_set_state() - Set the state of an external connector.
* @edev: the extcon device
* @id: the unique id indicating an external connector
* @state: the new state of an external connector.
* the default semantics is true: attached / false: detached.
*
* This function only set the state of a external connector without
* a notification. To synchronize the data of a external connector,
* use extcon_set_state_sync() and extcon_sync().
* Note that this function set the state of an external connector without
* a notification. To synchronize the state of an external connector,
* have to use extcon_set_state_sync() and extcon_sync().
*
* Returns 0 if success or error number if fail.
*/
int extcon_set_state(struct extcon_dev *edev, unsigned int id,
bool cable_state)
int extcon_set_state(struct extcon_dev *edev, unsigned int id, bool state)
{
unsigned long flags;
int index, ret = 0;
@ -550,11 +541,11 @@ int extcon_set_state(struct extcon_dev *edev, unsigned int id,
spin_lock_irqsave(&edev->lock, flags);
/* Check whether the external connector's state is changed. */
if (!is_extcon_changed(edev, index, cable_state))
if (!is_extcon_changed(edev, index, state))
goto out;
if (check_mutually_exclusive(edev,
(edev->state & ~BIT(index)) | (cable_state & BIT(index)))) {
(edev->state & ~BIT(index)) | (state & BIT(index)))) {
ret = -EPERM;
goto out;
}
@ -563,11 +554,11 @@ int extcon_set_state(struct extcon_dev *edev, unsigned int id,
* Initialize the value of extcon property before setting
* the detached state for an external connector.
*/
if (!cable_state)
if (!state)
init_property(edev, id, index);
/* Update the state for a external connector. */
if (cable_state)
/* Update the state for an external connector. */
if (state)
edev->state |= BIT(index);
else
edev->state &= ~(BIT(index));
@ -579,19 +570,18 @@ out:
EXPORT_SYMBOL_GPL(extcon_set_state);
/**
* extcon_set_state_sync() - Set the state of a external connector
* with a notification.
* @edev: the extcon device that has the cable.
* @id: the unique id of each external connector
* in extcon enumeration.
* @state: the new cable status. The default semantics is
* true: attached / false: detached.
* extcon_set_state_sync() - Set the state of an external connector with sync.
* @edev: the extcon device
* @id: the unique id indicating an external connector
* @state: the new state of external connector.
* the default semantics is true: attached / false: detached.
*
* This function set the state of external connector and synchronize the data
* by usning a notification.
* Note that this function set the state of external connector
* and synchronize the state by sending a notification.
*
* Returns 0 if success or error number if fail.
*/
int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
bool cable_state)
int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id, bool state)
{
int ret, index;
unsigned long flags;
@ -602,12 +592,12 @@ int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
/* Check whether the external connector's state is changed. */
spin_lock_irqsave(&edev->lock, flags);
ret = is_extcon_changed(edev, index, cable_state);
ret = is_extcon_changed(edev, index, state);
spin_unlock_irqrestore(&edev->lock, flags);
if (!ret)
return 0;
ret = extcon_set_state(edev, id, cable_state);
ret = extcon_set_state(edev, id, state);
if (ret < 0)
return ret;
@ -616,19 +606,18 @@ int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
EXPORT_SYMBOL_GPL(extcon_set_state_sync);
/**
* extcon_get_property() - Get the property value of a specific cable.
* @edev: the extcon device that has the cable.
* @id: the unique id of each external connector
* in extcon enumeration.
* @prop: the property id among enum extcon_property.
* @prop_val: the pointer which store the value of property.
* extcon_get_property() - Get the property value of an external connector.
* @edev: the extcon device
* @id: the unique id indicating an external connector
* @prop: the property id indicating an extcon property
* @prop_val: the pointer which store the value of extcon property
*
* When getting the property value of external connector, the external connector
* should be attached. If detached state, function just return 0 without
* property value. Also, the each property should be included in the list of
* supported properties according to the type of external connectors.
* Note that when getting the property value of external connector,
* the external connector should be attached. If detached state, function
* return 0 without property value. Also, the each property should be
* included in the list of supported properties according to extcon type.
*
* Returns 0 if success or error number if fail
* Returns 0 if success or error number if fail.
*/
int extcon_get_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
@ -698,17 +687,16 @@ int extcon_get_property(struct extcon_dev *edev, unsigned int id,
EXPORT_SYMBOL_GPL(extcon_get_property);
/**
* extcon_set_property() - Set the property value of a specific cable.
* @edev: the extcon device that has the cable.
* @id: the unique id of each external connector
* in extcon enumeration.
* @prop: the property id among enum extcon_property.
* @prop_val: the pointer including the new value of property.
* extcon_set_property() - Set the property value of an external connector.
* @edev: the extcon device
* @id: the unique id indicating an external connector
* @prop: the property id indicating an extcon property
* @prop_val: the pointer including the new value of extcon property
*
* The each property should be included in the list of supported properties
* according to the type of external connectors.
* Note that each property should be included in the list of supported
* properties according to the extcon type.
*
* Returns 0 if success or error number if fail
* Returns 0 if success or error number if fail.
*/
int extcon_set_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
@ -766,15 +754,14 @@ int extcon_set_property(struct extcon_dev *edev, unsigned int id,
EXPORT_SYMBOL_GPL(extcon_set_property);
/**
* extcon_set_property_sync() - Set the property value of a specific cable
with a notification.
* @prop_val: the pointer including the new value of property.
* extcon_set_property_sync() - Set property of an external connector with sync.
* @prop_val: the pointer including the new value of extcon property
*
* When setting the property value of external connector, the external connector
* should be attached. The each property should be included in the list of
* supported properties according to the type of external connectors.
* Note that when setting the property value of external connector,
* the external connector should be attached. The each property should
* be included in the list of supported properties according to extcon type.
*
* Returns 0 if success or error number if fail
* Returns 0 if success or error number if fail.
*/
int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
@ -791,12 +778,11 @@ int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
EXPORT_SYMBOL_GPL(extcon_set_property_sync);
/**
* extcon_get_property_capability() - Get the capability of property
* of an external connector.
* @edev: the extcon device that has the cable.
* @id: the unique id of each external connector
* in extcon enumeration.
* @prop: the property id among enum extcon_property.
* extcon_get_property_capability() - Get the capability of the property
* for an external connector.
* @edev: the extcon device
* @id: the unique id indicating an external connector
* @prop: the property id indicating an extcon property
*
* Returns 1 if the property is available or 0 if not available.
*/
@ -822,18 +808,17 @@ int extcon_get_property_capability(struct extcon_dev *edev, unsigned int id,
EXPORT_SYMBOL_GPL(extcon_get_property_capability);
/**
* extcon_set_property_capability() - Set the capability of a property
* of an external connector.
* @edev: the extcon device that has the cable.
* @id: the unique id of each external connector
* in extcon enumeration.
* @prop: the property id among enum extcon_property.
* extcon_set_property_capability() - Set the capability of the property
* for an external connector.
* @edev: the extcon device
* @id: the unique id indicating an external connector
* @prop: the property id indicating an extcon property
*
* This function set the capability of a property for an external connector
* to mark the bit in capability bitmap which mean the available state of
* a property.
* Note that this function set the capability of the property
* for an external connector in order to mark the bit in capability
* bitmap which mean the available state of the property.
*
* Returns 0 if success or error number if fail
* Returns 0 if success or error number if fail.
*/
int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id,
unsigned int prop)
@ -881,8 +866,10 @@ int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id,
EXPORT_SYMBOL_GPL(extcon_set_property_capability);
/**
* extcon_get_extcon_dev() - Get the extcon device instance from the name
* @extcon_name: The extcon name provided with extcon_dev_register()
* extcon_get_extcon_dev() - Get the extcon device instance from the name.
* @extcon_name: the extcon name provided with extcon_dev_register()
*
* Return the pointer of extcon device if success or ERR_PTR(err) if fail.
*/
struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
{
@ -904,15 +891,17 @@ out:
EXPORT_SYMBOL_GPL(extcon_get_extcon_dev);
/**
* extcon_register_notifier() - Register a notifiee to get notified by
* any attach status changes from the extcon.
* @edev: the extcon device that has the external connecotr.
* @id: the unique id of each external connector in extcon enumeration.
* @nb: a notifier block to be registered.
* extcon_register_notifier() - Register a notifier block to get notified by
* any state changes from the extcon.
* @edev: the extcon device
* @id: the unique id indicating an external connector
* @nb: a notifier block to be registered
*
* Note that the second parameter given to the callback of nb (val) is
* "old_state", not the current state. The current state can be retrieved
* by looking at the third pameter (edev pointer)'s state value.
* the current state of an external connector and the third pameter
* is the pointer of extcon device.
*
* Returns 0 if success or error number if fail.
*/
int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
struct notifier_block *nb)
@ -936,10 +925,12 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
EXPORT_SYMBOL_GPL(extcon_register_notifier);
/**
* extcon_unregister_notifier() - Unregister a notifiee from the extcon device.
* @edev: the extcon device that has the external connecotr.
* @id: the unique id of each external connector in extcon enumeration.
* @nb: a notifier block to be registered.
* extcon_unregister_notifier() - Unregister a notifier block from the extcon.
* @edev: the extcon device
* @id: the unique id indicating an external connector
* @nb: a notifier block to be registered
*
* Returns 0 if success or error number if fail.
*/
int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id,
struct notifier_block *nb)
@ -963,16 +954,16 @@ int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id,
EXPORT_SYMBOL_GPL(extcon_unregister_notifier);
/**
* extcon_register_notifier_all() - Register a notifier block for all connectors
* @edev: the extcon device that has the external connector.
* @nb: a notifier block to be registered.
* extcon_register_notifier_all() - Register a notifier block for all connectors.
* @edev: the extcon device
* @nb: a notifier block to be registered
*
* This function registers a notifier block in order to receive the state
* change of all supported external connectors from extcon device.
* Note that this function registers a notifier block in order to receive
* the state change of all supported external connectors from extcon device.
* And the second parameter given to the callback of nb (val) is
* the current state and third parameter is the edev pointer.
* the current state and the third pameter is the pointer of extcon device.
*
* Returns 0 if success or error number if fail
* Returns 0 if success or error number if fail.
*/
int extcon_register_notifier_all(struct extcon_dev *edev,
struct notifier_block *nb)
@ -993,10 +984,10 @@ EXPORT_SYMBOL_GPL(extcon_register_notifier_all);
/**
* extcon_unregister_notifier_all() - Unregister a notifier block from extcon.
* @edev: the extcon device that has the external connecotr.
* @nb: a notifier block to be registered.
* @edev: the extcon device
* @nb: a notifier block to be registered
*
* Returns 0 if success or error number if fail
* Returns 0 if success or error number if fail.
*/
int extcon_unregister_notifier_all(struct extcon_dev *edev,
struct notifier_block *nb)
@ -1045,15 +1036,14 @@ static void dummy_sysfs_dev_release(struct device *dev)
/*
* extcon_dev_allocate() - Allocate the memory of extcon device.
* @supported_cable: Array of supported extcon ending with EXTCON_NONE.
* If supported_cable is NULL, cable name related APIs
* are disabled.
* @supported_cable: the array of the supported external connectors
* ending with EXTCON_NONE.
*
* This function allocates the memory for extcon device without allocating
* memory in each extcon provider driver and initialize default setting for
* extcon device.
* Note that this function allocates the memory for extcon device
* and initialize default setting for the extcon device.
*
* Return the pointer of extcon device if success or ERR_PTR(err) if fail
* Returns the pointer memory of allocated extcon_dev if success
* or ERR_PTR(err) if fail.
*/
struct extcon_dev *extcon_dev_allocate(const unsigned int *supported_cable)
{
@ -1074,7 +1064,7 @@ struct extcon_dev *extcon_dev_allocate(const unsigned int *supported_cable)
/*
* extcon_dev_free() - Free the memory of extcon device.
* @edev: the extcon device to free
* @edev: the extcon device
*/
void extcon_dev_free(struct extcon_dev *edev)
{
@ -1083,13 +1073,18 @@ void extcon_dev_free(struct extcon_dev *edev)
EXPORT_SYMBOL_GPL(extcon_dev_free);
/**
* extcon_dev_register() - Register a new extcon device
* @edev : the new extcon device (should be allocated before calling)
* extcon_dev_register() - Register an new extcon device
* @edev: the extcon device to be registered
*
* Among the members of edev struct, please set the "user initializing data"
* in any case and set the "optional callbacks" if required. However, please
* do not set the values of "internal data", which are initialized by
* this function.
*
* Note that before calling this funciton, have to allocate the memory
* of an extcon device by using the extcon_dev_allocate(). And the extcon
* dev should include the supported_cable information.
*
* Returns 0 if success or error number if fail.
*/
int extcon_dev_register(struct extcon_dev *edev)
{
@ -1296,7 +1291,7 @@ EXPORT_SYMBOL_GPL(extcon_dev_register);
/**
* extcon_dev_unregister() - Unregister the extcon device.
* @edev: the extcon device instance to be unregistered.
* @edev: the extcon device to be unregistered.
*
* Note that this does not call kfree(edev) because edev was not allocated
* by this class.
@ -1342,11 +1337,11 @@ EXPORT_SYMBOL_GPL(extcon_dev_unregister);
#ifdef CONFIG_OF
/*
* extcon_get_edev_by_phandle - Get the extcon device from devicetree
* @dev - instance to the given device
* @index - index into list of extcon_dev
* extcon_get_edev_by_phandle - Get the extcon device from devicetree.
* @dev : the instance to the given device
* @index : the index into list of extcon_dev
*
* return the instance of extcon device
* Return the pointer of extcon device if success or ERR_PTR(err) if fail.
*/
struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
{
@ -1363,8 +1358,8 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
node = of_parse_phandle(dev->of_node, "extcon", index);
if (!node) {
dev_dbg(dev, "failed to get phandle in %s node\n",
dev->of_node->full_name);
dev_dbg(dev, "failed to get phandle in %pOF node\n",
dev->of_node);
return ERR_PTR(-ENODEV);
}
@ -1411,8 +1406,6 @@ static void __exit extcon_class_exit(void)
module_exit(extcon_class_exit);
MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
MODULE_DESCRIPTION("External connector (extcon) class driver");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("External Connector (extcon) framework");
MODULE_LICENSE("GPL v2");

10
drivers/firmware/google/vpd.c
View File

@ -202,7 +202,7 @@ static int vpd_section_init(const char *name, struct vpd_section *sec,
sec->raw_name = kasprintf(GFP_KERNEL, "%s_raw", name);
if (!sec->raw_name) {
err = -ENOMEM;
goto err_iounmap;
goto err_memunmap;
}
sysfs_bin_attr_init(&sec->bin_attr);
@ -233,8 +233,8 @@ err_sysfs_remove:
sysfs_remove_bin_file(vpd_kobj, &sec->bin_attr);
err_free_raw_name:
kfree(sec->raw_name);
err_iounmap:
iounmap(sec->baseaddr);
err_memunmap:
memunmap(sec->baseaddr);
return err;
}
@ -245,7 +245,7 @@ static int vpd_section_destroy(struct vpd_section *sec)
kobject_put(sec->kobj);
sysfs_remove_bin_file(vpd_kobj, &sec->bin_attr);
kfree(sec->raw_name);
iounmap(sec->baseaddr);
memunmap(sec->baseaddr);
}
return 0;
@ -262,7 +262,7 @@ static int vpd_sections_init(phys_addr_t physaddr)
return -ENOMEM;
memcpy_fromio(&header, temp, sizeof(struct vpd_cbmem));
iounmap(temp);
memunmap(temp);
if (header.magic != VPD_CBMEM_MAGIC)
return -ENODEV;

1
drivers/fmc/Makefile
View File

@ -6,6 +6,7 @@ fmc-y += fmc-match.o
fmc-y += fmc-sdb.o
fmc-y += fru-parse.o
fmc-y += fmc-dump.o
fmc-y += fmc-debug.o
obj-$(CONFIG_FMC_FAKEDEV) += fmc-fakedev.o
obj-$(CONFIG_FMC_TRIVIAL) += fmc-trivial.o

3
drivers/fmc/fmc-chardev.c
View File

@ -129,8 +129,7 @@ static int fc_probe(struct fmc_device *fmc)
struct fc_instance *fc;
if (fmc->op->validate)
index = fmc->op->validate(fmc, &fc_drv);
index = fmc_validate(fmc, &fc_drv);
if (index < 0)
return -EINVAL; /* not our device: invalid */

95
drivers/fmc/fmc-core.c
View File

@ -13,6 +13,9 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/fmc.h>
#include <linux/fmc-sdb.h>
#include "fmc-private.h"
static int fmc_check_version(unsigned long version, const char *name)
{
@ -118,6 +121,61 @@ static struct bin_attribute fmc_eeprom_attr = {
.write = fmc_write_eeprom,
};
int fmc_irq_request(struct fmc_device *fmc, irq_handler_t h,
char *name, int flags)
{
if (fmc->op->irq_request)
return fmc->op->irq_request(fmc, h, name, flags);
return -EPERM;
}
EXPORT_SYMBOL(fmc_irq_request);
void fmc_irq_free(struct fmc_device *fmc)
{
if (fmc->op->irq_free)
fmc->op->irq_free(fmc);
}
EXPORT_SYMBOL(fmc_irq_free);
void fmc_irq_ack(struct fmc_device *fmc)
{
if (likely(fmc->op->irq_ack))
fmc->op->irq_ack(fmc);
}
EXPORT_SYMBOL(fmc_irq_ack);
int fmc_validate(struct fmc_device *fmc, struct fmc_driver *drv)
{
if (fmc->op->validate)
return fmc->op->validate(fmc, drv);
return -EPERM;
}
EXPORT_SYMBOL(fmc_validate);
int fmc_gpio_config(struct fmc_device *fmc, struct fmc_gpio *gpio, int ngpio)
{
if (fmc->op->gpio_config)
return fmc->op->gpio_config(fmc, gpio, ngpio);
return -EPERM;
}
EXPORT_SYMBOL(fmc_gpio_config);
int fmc_read_ee(struct fmc_device *fmc, int pos, void *d, int l)
{
if (fmc->op->read_ee)
return fmc->op->read_ee(fmc, pos, d, l);
return -EPERM;
}
EXPORT_SYMBOL(fmc_read_ee);
int fmc_write_ee(struct fmc_device *fmc, int pos, const void *d, int l)
{
if (fmc->op->write_ee)
return fmc->op->write_ee(fmc, pos, d, l);
return -EPERM;
}
EXPORT_SYMBOL(fmc_write_ee);
/*
* Functions for client modules follow
*/
@ -141,7 +199,8 @@ EXPORT_SYMBOL(fmc_driver_unregister);
* When a device set is registered, all eeproms must be read
* and all FRUs must be parsed
*/
int fmc_device_register_n(struct fmc_device **devs, int n)
int fmc_device_register_n_gw(struct fmc_device **devs, int n,
struct fmc_gateware *gw)
{
struct fmc_device *fmc, **devarray;
uint32_t device_id;
@ -221,6 +280,21 @@ int fmc_device_register_n(struct fmc_device **devs, int n)
else
dev_set_name(&fmc->dev, "%s-%04x", fmc->mezzanine_name,
device_id);
if (gw) {
/*
* The carrier already know the bitstream to load
* for this set of FMC mezzanines.
*/
ret = fmc->op->reprogram_raw(fmc, NULL,
gw->bitstream, gw->len);
if (ret) {
dev_warn(fmc->hwdev,
"Invalid gateware for FMC mezzanine\n");
goto out;
}
}
ret = device_add(&fmc->dev);
if (ret < 0) {
dev_err(fmc->hwdev, "Slot %i: Failed in registering "
@ -234,18 +308,16 @@ int fmc_device_register_n(struct fmc_device **devs, int n)
}
/* This device went well, give information to the user */
fmc_dump_eeprom(fmc);
fmc_dump_sdb(fmc);
fmc_debug_init(fmc);
}
return 0;
out1:
device_del(&fmc->dev);
out:
fmc_free_id_info(fmc);
put_device(&fmc->dev);
kfree(devarray);
for (i--; i >= 0; i--) {
fmc_debug_exit(devs[i]);
sysfs_remove_bin_file(&devs[i]->dev.kobj, &fmc_eeprom_attr);
device_del(&devs[i]->dev);
fmc_free_id_info(devs[i]);
@ -254,8 +326,20 @@ out:
return ret;
}
EXPORT_SYMBOL(fmc_device_register_n_gw);
int fmc_device_register_n(struct fmc_device **devs, int n)
{
return fmc_device_register_n_gw(devs, n, NULL);
}
EXPORT_SYMBOL(fmc_device_register_n);
int fmc_device_register_gw(struct fmc_device *fmc, struct fmc_gateware *gw)
{
return fmc_device_register_n_gw(&fmc, 1, gw);
}
EXPORT_SYMBOL(fmc_device_register_gw);
int fmc_device_register(struct fmc_device *fmc)
{
return fmc_device_register_n(&fmc, 1);
@ -273,6 +357,7 @@ void fmc_device_unregister_n(struct fmc_device **devs, int n)
kfree(devs[0]->devarray);
for (i = 0; i < n; i++) {
fmc_debug_exit(devs[i]);
sysfs_remove_bin_file(&devs[i]->dev.kobj, &fmc_eeprom_attr);
device_del(&devs[i]->dev);
fmc_free_id_info(devs[i]);

173
drivers/fmc/fmc-debug.c Normal file
View File

@ -0,0 +1,173 @@
/*
* Copyright (C) 2015 CERN (www.cern.ch)
* Author: Federico Vaga <federico.vaga@cern.ch>
*
* Released according to the GNU GPL, version 2 or any later version.
*/
#include <linux/module.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <asm/byteorder.h>
#include <linux/fmc.h>
#include <linux/sdb.h>
#include <linux/fmc-sdb.h>
#define FMC_DBG_SDB_DUMP "dump_sdb"
static char *__strip_trailing_space(char *buf, char *str, int len)
{
int i = len - 1;
memcpy(buf, str, len);
buf[len] = '\0';
while (i >= 0 && buf[i] == ' ')
buf[i--] = '\0';
return buf;
}
#define __sdb_string(buf, field) ({ \
BUILD_BUG_ON(sizeof(buf) < sizeof(field)); \
__strip_trailing_space(buf, (void *)(field), sizeof(field)); \
})
/**
* We do not check seq_printf() errors because we want to see things in any case
*/
static void fmc_sdb_dump_recursive(struct fmc_device *fmc, struct seq_file *s,
const struct sdb_array *arr)
{
unsigned long base = arr->baseaddr;
int i, j, n = arr->len, level = arr->level;
char tmp[64];
for (i = 0; i < n; i++) {
union sdb_record *r;
struct sdb_product *p;
struct sdb_component *c;
r = &arr->record[i];
c = &r->dev.sdb_component;
p = &c->product;
for (j = 0; j < level; j++)
seq_printf(s, " ");
switch (r->empty.record_type) {
case sdb_type_interconnect:
seq_printf(s, "%08llx:%08x %.19s\n",
__be64_to_cpu(p->vendor_id),
__be32_to_cpu(p->device_id),
p->name);
break;
case sdb_type_device:
seq_printf(s, "%08llx:%08x %.19s (%08llx-%08llx)\n",
__be64_to_cpu(p->vendor_id),
__be32_to_cpu(p->device_id),
p->name,
__be64_to_cpu(c->addr_first) + base,
__be64_to_cpu(c->addr_last) + base);
break;
case sdb_type_bridge:
seq_printf(s, "%08llx:%08x %.19s (bridge: %08llx)\n",
__be64_to_cpu(p->vendor_id),
__be32_to_cpu(p->device_id),
p->name,
__be64_to_cpu(c->addr_first) + base);
if (IS_ERR(arr->subtree[i])) {
seq_printf(s, "SDB: (bridge error %li)\n",
PTR_ERR(arr->subtree[i]));
break;
}
fmc_sdb_dump_recursive(fmc, s, arr->subtree[i]);
break;
case sdb_type_integration:
seq_printf(s, "integration\n");
break;
case sdb_type_repo_url:
seq_printf(s, "Synthesis repository: %s\n",
__sdb_string(tmp, r->repo_url.repo_url));
break;
case sdb_type_synthesis:
seq_printf(s, "Bitstream '%s' ",
__sdb_string(tmp, r->synthesis.syn_name));
seq_printf(s, "synthesized %08x by %s ",
__be32_to_cpu(r->synthesis.date),
__sdb_string(tmp, r->synthesis.user_name));
seq_printf(s, "(%s version %x), ",
__sdb_string(tmp, r->synthesis.tool_name),
__be32_to_cpu(r->synthesis.tool_version));
seq_printf(s, "commit %pm\n",
r->synthesis.commit_id);
break;
case sdb_type_empty:
seq_printf(s, "empty\n");
break;
default:
seq_printf(s, "UNKNOWN TYPE 0x%02x\n",
r->empty.record_type);
break;
}
}
}
static int fmc_sdb_dump(struct seq_file *s, void *offset)
{
struct fmc_device *fmc = s->private;
if (!fmc->sdb) {
seq_printf(s, "no SDB information\n");
return 0;
}
seq_printf(s, "FMC: %s (%s), slot %i, device %s\n", dev_name(fmc->hwdev),
fmc->carrier_name, fmc->slot_id, dev_name(&fmc->dev));
/* Dump SDB information */
fmc_sdb_dump_recursive(fmc, s, fmc->sdb);
return 0;
}
static int fmc_sdb_dump_open(struct inode *inode, struct file *file)
{
struct fmc_device *fmc = inode->i_private;
return single_open(file, fmc_sdb_dump, fmc);
}
const struct file_operations fmc_dbgfs_sdb_dump = {
.owner = THIS_MODULE,
.open = fmc_sdb_dump_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
int fmc_debug_init(struct fmc_device *fmc)
{
fmc->dbg_dir = debugfs_create_dir(dev_name(&fmc->dev), NULL);
if (IS_ERR_OR_NULL(fmc->dbg_dir)) {
pr_err("FMC: Cannot create debugfs\n");
return PTR_ERR(fmc->dbg_dir);
}
fmc->dbg_sdb_dump = debugfs_create_file(FMC_DBG_SDB_DUMP, 0444,
fmc->dbg_dir, fmc,
&fmc_dbgfs_sdb_dump);
if (IS_ERR_OR_NULL(fmc->dbg_sdb_dump))
pr_err("FMC: Cannot create debugfs file %s\n",
FMC_DBG_SDB_DUMP);
return 0;
}
void fmc_debug_exit(struct fmc_device *fmc)
{
if (fmc->dbg_dir)
debugfs_remove_recursive(fmc->dbg_dir);
}

41
drivers/fmc/fmc-dump.c
View File

@ -15,8 +15,6 @@
static int fmc_must_dump_eeprom;
module_param_named(dump_eeprom, fmc_must_dump_eeprom, int, 0644);
static int fmc_must_dump_sdb;
module_param_named(dump_sdb, fmc_must_dump_sdb, int, 0644);
#define LINELEN 16
@ -59,42 +57,3 @@ void fmc_dump_eeprom(const struct fmc_device *fmc)
for (i = 0; i < fmc->eeprom_len; i += LINELEN, line += LINELEN)
prev = dump_line(i, line, prev);
}
void fmc_dump_sdb(const struct fmc_device *fmc)
{
const uint8_t *line, *prev;
int i, len;
if (!fmc->sdb)
return;
if (!fmc_must_dump_sdb)
return;
/* If the argument is not-zero, do simple dump (== show) */
if (fmc_must_dump_sdb > 0)
fmc_show_sdb_tree(fmc);
if (fmc_must_dump_sdb == 1)
return;
/* If bigger than 1, dump it seriously, to help debugging */
/*
* Here we should really use libsdbfs (which is designed to
* work in kernel space as well) , but it doesn't support
* directories yet, and it requires better intergration (it
* should be used instead of fmc-specific code).
*
* So, lazily, just dump the top-level array
*/
pr_info("FMC: %s (%s), slot %i, device %s\n", dev_name(fmc->hwdev),
fmc->carrier_name, fmc->slot_id, dev_name(&fmc->dev));
pr_info("FMC: poor dump of sdb first level:\n");
len = fmc->sdb->len * sizeof(union sdb_record);
line = (void *)fmc->sdb->record;
prev = NULL;
for (i = 0; i < len; i += LINELEN, line += LINELEN)
prev = dump_line(i, line, prev);
return;
}

2
drivers/fmc/fmc-match.c
View File

@ -63,7 +63,7 @@ int fmc_fill_id_info(struct fmc_device *fmc)
if (!fmc->eeprom)
return -ENOMEM;
allocated = 1;
ret = fmc->op->read_ee(fmc, 0, fmc->eeprom, fmc->eeprom_len);
ret = fmc_read_ee(fmc, 0, fmc->eeprom, fmc->eeprom_len);
if (ret < 0)
goto out;
}

9
drivers/fmc/fmc-private.h Normal file
View File

@ -0,0 +1,9 @@
/*
* Copyright (C) 2015 CERN (www.cern.ch)
* Author: Federico Vaga <federico.vaga@cern.ch>
*
* Released according to the GNU GPL, version 2 or any later version.
*/
extern int fmc_debug_init(struct fmc_device *fmc);
extern void fmc_debug_exit(struct fmc_device *fmc);

123
drivers/fmc/fmc-sdb.c
View File

@ -126,6 +126,30 @@ int fmc_free_sdb_tree(struct fmc_device *fmc)
}
EXPORT_SYMBOL(fmc_free_sdb_tree);
/* This helper calls reprogram and inizialized sdb as well */
int fmc_reprogram_raw(struct fmc_device *fmc, struct fmc_driver *d,
void *gw, unsigned long len, int sdb_entry)
{
int ret;
ret = fmc->op->reprogram_raw(fmc, d, gw, len);
if (ret < 0)
return ret;
if (sdb_entry < 0)
return ret;
/* We are required to find SDB at a given offset */
ret = fmc_scan_sdb_tree(fmc, sdb_entry);
if (ret < 0) {
dev_err(&fmc->dev, "Can't find SDB at address 0x%x\n",
sdb_entry);
return -ENODEV;
}
return 0;
}
EXPORT_SYMBOL(fmc_reprogram_raw);
/* This helper calls reprogram and inizialized sdb as well */
int fmc_reprogram(struct fmc_device *fmc, struct fmc_driver *d, char *gw,
int sdb_entry)
@ -145,108 +169,15 @@ int fmc_reprogram(struct fmc_device *fmc, struct fmc_driver *d, char *gw,
sdb_entry);
return -ENODEV;
}
fmc_dump_sdb(fmc);
return 0;
}
EXPORT_SYMBOL(fmc_reprogram);
static char *__strip_trailing_space(char *buf, char *str, int len)
{
int i = len - 1;
memcpy(buf, str, len);
while(i >= 0 && buf[i] == ' ')
buf[i--] = '\0';
return buf;
}
#define __sdb_string(buf, field) ({ \
BUILD_BUG_ON(sizeof(buf) < sizeof(field)); \
__strip_trailing_space(buf, (void *)(field), sizeof(field)); \
})
static void __fmc_show_sdb_tree(const struct fmc_device *fmc,
const struct sdb_array *arr)
{
unsigned long base = arr->baseaddr;
int i, j, n = arr->len, level = arr->level;
char buf[64];
for (i = 0; i < n; i++) {
union sdb_record *r;
struct sdb_product *p;
struct sdb_component *c;
r = &arr->record[i];
c = &r->dev.sdb_component;
p = &c->product;
dev_info(&fmc->dev, "SDB: ");
for (j = 0; j < level; j++)
printk(KERN_CONT " ");
switch (r->empty.record_type) {
case sdb_type_interconnect:
printk(KERN_CONT "%08llx:%08x %.19s\n",
__be64_to_cpu(p->vendor_id),
__be32_to_cpu(p->device_id),
p->name);
break;
case sdb_type_device:
printk(KERN_CONT "%08llx:%08x %.19s (%08llx-%08llx)\n",
__be64_to_cpu(p->vendor_id),
__be32_to_cpu(p->device_id),
p->name,
__be64_to_cpu(c->addr_first) + base,
__be64_to_cpu(c->addr_last) + base);
break;
case sdb_type_bridge:
printk(KERN_CONT "%08llx:%08x %.19s (bridge: %08llx)\n",
__be64_to_cpu(p->vendor_id),
__be32_to_cpu(p->device_id),
p->name,
__be64_to_cpu(c->addr_first) + base);
if (IS_ERR(arr->subtree[i])) {
dev_info(&fmc->dev, "SDB: (bridge error %li)\n",
PTR_ERR(arr->subtree[i]));
break;
}
__fmc_show_sdb_tree(fmc, arr->subtree[i]);
break;
case sdb_type_integration:
printk(KERN_CONT "integration\n");
break;
case sdb_type_repo_url:
printk(KERN_CONT "Synthesis repository: %s\n",
__sdb_string(buf, r->repo_url.repo_url));
break;
case sdb_type_synthesis:
printk(KERN_CONT "Bitstream '%s' ",
__sdb_string(buf, r->synthesis.syn_name));
printk(KERN_CONT "synthesized %08x by %s ",
__be32_to_cpu(r->synthesis.date),
__sdb_string(buf, r->synthesis.user_name));
printk(KERN_CONT "(%s version %x), ",
__sdb_string(buf, r->synthesis.tool_name),
__be32_to_cpu(r->synthesis.tool_version));
printk(KERN_CONT "commit %pm\n",
r->synthesis.commit_id);
break;
case sdb_type_empty:
printk(KERN_CONT "empty\n");
break;
default:
printk(KERN_CONT "UNKNOWN TYPE 0x%02x\n",
r->empty.record_type);
break;
}
}
}
void fmc_show_sdb_tree(const struct fmc_device *fmc)
{
if (!fmc->sdb)
return;
__fmc_show_sdb_tree(fmc, fmc->sdb);
pr_err("%s: not supported anymore, use debugfs to dump SDB\n",
__func__);
}
EXPORT_SYMBOL(fmc_show_sdb_tree);

20
drivers/fmc/fmc-trivial.c
View File

@ -24,7 +24,7 @@ static irqreturn_t t_handler(int irq, void *dev_id)
{
struct fmc_device *fmc = dev_id;
fmc->op->irq_ack(fmc);
fmc_irq_ack(fmc);
dev_info(&fmc->dev, "received irq %i\n", irq);
return IRQ_HANDLED;
}
@ -46,25 +46,21 @@ static int t_probe(struct fmc_device *fmc)
int ret;
int index = 0;
if (fmc->op->validate)
index = fmc->op->validate(fmc, &t_drv);
index = fmc_validate(fmc, &t_drv);
if (index < 0)
return -EINVAL; /* not our device: invalid */
ret = fmc->op->irq_request(fmc, t_handler, "fmc-trivial", IRQF_SHARED);
ret = fmc_irq_request(fmc, t_handler, "fmc-trivial", IRQF_SHARED);
if (ret < 0)
return ret;
/* ignore error code of call below, we really don't care */
fmc->op->gpio_config(fmc, t_gpio, ARRAY_SIZE(t_gpio));
fmc_gpio_config(fmc, t_gpio, ARRAY_SIZE(t_gpio));
/* Reprogram, if asked to. ESRCH == no filename specified */
ret = -ESRCH;
if (fmc->op->reprogram)
ret = fmc->op->reprogram(fmc, &t_drv, "");
if (ret == -ESRCH)
ret = fmc_reprogram(fmc, &t_drv, "", 0);
if (ret == -EPERM) /* programming not supported */
ret = 0;
if (ret < 0)
fmc->op->irq_free(fmc);
fmc_irq_free(fmc);
/* FIXME: reprogram LM32 too */
return ret;
@ -72,7 +68,7 @@ static int t_probe(struct fmc_device *fmc)
static int t_remove(struct fmc_device *fmc)
{
fmc->op->irq_free(fmc);
fmc_irq_free(fmc);
return 0;
}

8
drivers/fmc/fmc-write-eeprom.c
View File

@ -50,7 +50,7 @@ static int fwe_run_tlv(struct fmc_device *fmc, const struct firmware *fw,
if (write) {
dev_info(&fmc->dev, "write %i bytes at 0x%04x\n",
thislen, thisaddr);
err = fmc->op->write_ee(fmc, thisaddr, p + 5, thislen);
err = fmc_write_ee(fmc, thisaddr, p + 5, thislen);
}
if (err < 0) {
dev_err(&fmc->dev, "write failure @0x%04x\n",
@ -70,7 +70,7 @@ static int fwe_run_bin(struct fmc_device *fmc, const struct firmware *fw)
int ret;
dev_info(&fmc->dev, "programming %zi bytes\n", fw->size);
ret = fmc->op->write_ee(fmc, 0, (void *)fw->data, fw->size);
ret = fmc_write_ee(fmc, 0, (void *)fw->data, fw->size);
if (ret < 0) {
dev_info(&fmc->dev, "write_eeprom: error %i\n", ret);
return ret;
@ -115,8 +115,8 @@ static int fwe_probe(struct fmc_device *fmc)
KBUILD_MODNAME);
return -ENODEV;
}
if (fmc->op->validate)
index = fmc->op->validate(fmc, &fwe_drv);
index = fmc_validate(fmc, &fwe_drv);
if (index < 0) {
pr_err("%s: refusing device \"%s\"\n", KBUILD_MODNAME,
dev_name(dev));

3
drivers/fmc/fru-parse.c
View File

@ -31,12 +31,11 @@ static char *__fru_alloc_get_tl(struct fru_common_header *header, int nr)
{
struct fru_type_length *tl;
char *res;
int len;
tl = __fru_get_board_tl(header, nr);
if (!tl)
return NULL;
len = fru_strlen(tl);
res = fru_alloc(fru_strlen(tl) + 1);
if (!res)
return NULL;

20
drivers/fpga/Kconfig
View File

@ -2,9 +2,7 @@
# FPGA framework configuration
#
menu "FPGA Configuration Support"
config FPGA
menuconfig FPGA
tristate "FPGA Configuration Framework"
help
Say Y here if you want support for configuring FPGAs from the
@ -26,6 +24,20 @@ config FPGA_MGR_ICE40_SPI
help
FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
config FPGA_MGR_ALTERA_CVP
tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager"
depends on PCI
help
FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V
and Arria 10 Altera FPGAs using the CvP interface over PCIe.
config FPGA_MGR_ALTERA_PS_SPI
tristate "Altera FPGA Passive Serial over SPI"
depends on SPI
help
FPGA manager driver support for Altera Arria/Cyclone/Stratix
using the passive serial interface over SPI.
config FPGA_MGR_SOCFPGA
tristate "Altera SOCFPGA FPGA Manager"
depends on ARCH_SOCFPGA || COMPILE_TEST
@ -106,5 +118,3 @@ config XILINX_PR_DECOUPLER
being reprogrammed during partial reconfig.
endif # FPGA
endmenu

2
drivers/fpga/Makefile
View File

@ -6,6 +6,8 @@
obj-$(CONFIG_FPGA) += fpga-mgr.o
# FPGA Manager Drivers
obj-$(CONFIG_FPGA_MGR_ALTERA_CVP) += altera-cvp.o
obj-$(CONFIG_FPGA_MGR_ALTERA_PS_SPI) += altera-ps-spi.o
obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o
obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o

500
drivers/fpga/altera-cvp.c Normal file
View File

@ -0,0 +1,500 @@
/*
* FPGA Manager Driver for Altera Arria/Cyclone/Stratix CvP
*
* Copyright (C) 2017 DENX Software Engineering
*
* Anatolij Gustschin <agust@denx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Manage Altera FPGA firmware using PCIe CvP.
* Firmware must be in binary "rbf" format.
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/fpga/fpga-mgr.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/sizes.h>
#define CVP_BAR 0 /* BAR used for data transfer in memory mode */
#define CVP_DUMMY_WR 244 /* dummy writes to clear CvP state machine */
#define TIMEOUT_US 2000 /* CVP STATUS timeout for USERMODE polling */
/* Vendor Specific Extended Capability Registers */
#define VSE_PCIE_EXT_CAP_ID 0x200
#define VSE_PCIE_EXT_CAP_ID_VAL 0x000b /* 16bit */
#define VSE_CVP_STATUS 0x21c /* 32bit */
#define VSE_CVP_STATUS_CFG_RDY BIT(18) /* CVP_CONFIG_READY */
#define VSE_CVP_STATUS_CFG_ERR BIT(19) /* CVP_CONFIG_ERROR */
#define VSE_CVP_STATUS_CVP_EN BIT(20) /* ctrl block is enabling CVP */
#define VSE_CVP_STATUS_USERMODE BIT(21) /* USERMODE */
#define VSE_CVP_STATUS_CFG_DONE BIT(23) /* CVP_CONFIG_DONE */
#define VSE_CVP_STATUS_PLD_CLK_IN_USE BIT(24) /* PLD_CLK_IN_USE */
#define VSE_CVP_MODE_CTRL 0x220 /* 32bit */
#define VSE_CVP_MODE_CTRL_CVP_MODE BIT(0) /* CVP (1) or normal mode (0) */
#define VSE_CVP_MODE_CTRL_HIP_CLK_SEL BIT(1) /* PMA (1) or fabric clock (0) */
#define VSE_CVP_MODE_CTRL_NUMCLKS_OFF 8 /* NUMCLKS bits offset */
#define VSE_CVP_MODE_CTRL_NUMCLKS_MASK GENMASK(15, 8)
#define VSE_CVP_DATA 0x228 /* 32bit */
#define VSE_CVP_PROG_CTRL 0x22c /* 32bit */
#define VSE_CVP_PROG_CTRL_CONFIG BIT(0)
#define VSE_CVP_PROG_CTRL_START_XFER BIT(1)
#define VSE_UNCOR_ERR_STATUS 0x234 /* 32bit */
#define VSE_UNCOR_ERR_CVP_CFG_ERR BIT(5) /* CVP_CONFIG_ERROR_LATCHED */
#define DRV_NAME "altera-cvp"
#define ALTERA_CVP_MGR_NAME "Altera CvP FPGA Manager"
/* Optional CvP config error status check for debugging */
static bool altera_cvp_chkcfg;
struct altera_cvp_conf {
struct fpga_manager *mgr;
struct pci_dev *pci_dev;
void __iomem *map;
void (*write_data)(struct altera_cvp_conf *, u32);
char mgr_name[64];
u8 numclks;
};
static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr)
{
struct altera_cvp_conf *conf = mgr->priv;
u32 status;
pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &status);
if (status & VSE_CVP_STATUS_CFG_DONE)
return FPGA_MGR_STATE_OPERATING;
if (status & VSE_CVP_STATUS_CVP_EN)
return FPGA_MGR_STATE_POWER_UP;
return FPGA_MGR_STATE_UNKNOWN;
}
static void altera_cvp_write_data_iomem(struct altera_cvp_conf *conf, u32 val)
{
writel(val, conf->map);
}
static void altera_cvp_write_data_config(struct altera_cvp_conf *conf, u32 val)
{
pci_write_config_dword(conf->pci_dev, VSE_CVP_DATA, val);
}
/* switches between CvP clock and internal clock */
static void altera_cvp_dummy_write(struct altera_cvp_conf *conf)
{
unsigned int i;
u32 val;
/* set 1 CVP clock cycle for every CVP Data Register Write */
pci_read_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, &val);
val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
val |= 1 << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
pci_write_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, val);
for (i = 0; i < CVP_DUMMY_WR; i++)
conf->write_data(conf, 0); /* dummy data, could be any value */
}
static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
u32 status_val, int timeout_us)
{
unsigned int retries;
u32 val;
retries = timeout_us / 10;
if (timeout_us % 10)
retries++;
do {
pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
if ((val & status_mask) == status_val)
return 0;
/* use small usleep value to re-check and break early */
usleep_range(10, 11);
} while (--retries);
return -ETIMEDOUT;
}
static int altera_cvp_teardown(struct fpga_manager *mgr,
struct fpga_image_info *info)
{
struct altera_cvp_conf *conf = mgr->priv;
struct pci_dev *pdev = conf->pci_dev;
int ret;
u32 val;
/* STEP 12 - reset START_XFER bit */
pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
val &= ~VSE_CVP_PROG_CTRL_START_XFER;
pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
/* STEP 13 - reset CVP_CONFIG bit */
val &= ~VSE_CVP_PROG_CTRL_CONFIG;
pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
/*
* STEP 14
* - set CVP_NUMCLKS to 1 and then issue CVP_DUMMY_WR dummy
* writes to the HIP
*/
altera_cvp_dummy_write(conf); /* from CVP clock to internal clock */
/* STEP 15 - poll CVP_CONFIG_READY bit for 0 with 10us timeout */
ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0, 10);
if (ret)
dev_err(&mgr->dev, "CFG_RDY == 0 timeout\n");
return ret;
}
static int altera_cvp_write_init(struct fpga_manager *mgr,
struct fpga_image_info *info,
const char *buf, size_t count)
{
struct altera_cvp_conf *conf = mgr->priv;
struct pci_dev *pdev = conf->pci_dev;
u32 iflags, val;
int ret;
iflags = info ? info->flags : 0;
if (iflags & FPGA_MGR_PARTIAL_RECONFIG) {
dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
return -EINVAL;
}
/* Determine allowed clock to data ratio */
if (iflags & FPGA_MGR_COMPRESSED_BITSTREAM)
conf->numclks = 8; /* ratio for all compressed images */
else if (iflags & FPGA_MGR_ENCRYPTED_BITSTREAM)
conf->numclks = 4; /* for uncompressed and encrypted images */
else
conf->numclks = 1; /* for uncompressed and unencrypted images */
/* STEP 1 - read CVP status and check CVP_EN flag */
pci_read_config_dword(pdev, VSE_CVP_STATUS, &val);
if (!(val & VSE_CVP_STATUS_CVP_EN)) {
dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val);
return -ENODEV;
}
if (val & VSE_CVP_STATUS_CFG_RDY) {
dev_warn(&mgr->dev, "CvP already started, teardown first\n");
ret = altera_cvp_teardown(mgr, info);
if (ret)
return ret;
}
/*
* STEP 2
* - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned)
*/
/* switch from fabric to PMA clock */
pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
val |= VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
/* set CVP mode */
pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
val |= VSE_CVP_MODE_CTRL_CVP_MODE;
pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
/*
* STEP 3
* - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
*/
altera_cvp_dummy_write(conf);
/* STEP 4 - set CVP_CONFIG bit */
pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
/* request control block to begin transfer using CVP */
val |= VSE_CVP_PROG_CTRL_CONFIG;
pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
/* STEP 5 - poll CVP_CONFIG READY for 1 with 10us timeout */
ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY,
VSE_CVP_STATUS_CFG_RDY, 10);
if (ret) {
dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
return ret;
}
/*
* STEP 6
* - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
*/
altera_cvp_dummy_write(conf);
/* STEP 7 - set START_XFER */
pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
val |= VSE_CVP_PROG_CTRL_START_XFER;
pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
/* STEP 8 - start transfer (set CVP_NUMCLKS for bitstream) */
pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
return 0;
}
static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
{
struct altera_cvp_conf *conf = mgr->priv;
u32 val;
/* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
if (val & VSE_CVP_STATUS_CFG_ERR) {
dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
bytes);
return -EPROTO;
}
return 0;
}
static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
size_t count)
{
struct altera_cvp_conf *conf = mgr->priv;
const u32 *data;
size_t done, remaining;
int status = 0;
u32 mask;
/* STEP 9 - write 32-bit data from RBF file to CVP data register */
data = (u32 *)buf;
remaining = count;
done = 0;
while (remaining >= 4) {
conf->write_data(conf, *data++);
done += 4;
remaining -= 4;
/*
* STEP 10 (optional) and STEP 11
* - check error flag
* - loop until data transfer completed
* Config images can be huge (more than 40 MiB), so
* only check after a new 4k data block has been written.
* This reduces the number of checks and speeds up the
* configuration process.
*/
if (altera_cvp_chkcfg && !(done % SZ_4K)) {
status = altera_cvp_chk_error(mgr, done);
if (status < 0)
return status;
}
}
/* write up to 3 trailing bytes, if any */
mask = BIT(remaining * 8) - 1;
if (mask)
conf->write_data(conf, *data & mask);
if (altera_cvp_chkcfg)
status = altera_cvp_chk_error(mgr, count);
return status;
}
static int altera_cvp_write_complete(struct fpga_manager *mgr,
struct fpga_image_info *info)
{
struct altera_cvp_conf *conf = mgr->priv;
struct pci_dev *pdev = conf->pci_dev;
int ret;
u32 mask;
u32 val;
ret = altera_cvp_teardown(mgr, info);
if (ret)
return ret;
/* STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit */
pci_read_config_dword(pdev, VSE_UNCOR_ERR_STATUS, &val);
if (val & VSE_UNCOR_ERR_CVP_CFG_ERR) {
dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n");
return -EPROTO;
}
/* STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit */
pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
val &= ~VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
val &= ~VSE_CVP_MODE_CTRL_CVP_MODE;
pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
/* STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits */
mask = VSE_CVP_STATUS_PLD_CLK_IN_USE | VSE_CVP_STATUS_USERMODE;
ret = altera_cvp_wait_status(conf, mask, mask, TIMEOUT_US);
if (ret)
dev_err(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n");
return ret;
}
static const struct fpga_manager_ops altera_cvp_ops = {
.state = altera_cvp_state,
.write_init = altera_cvp_write_init,
.write = altera_cvp_write,
.write_complete = altera_cvp_write_complete,
};
static ssize_t show_chkcfg(struct device_driver *dev, char *buf)
{
return snprintf(buf, 3, "%d\n", altera_cvp_chkcfg);
}
static ssize_t store_chkcfg(struct device_driver *drv, const char *buf,
size_t count)
{
int ret;
ret = kstrtobool(buf, &altera_cvp_chkcfg);
if (ret)
return ret;
return count;
}
static DRIVER_ATTR(chkcfg, 0600, show_chkcfg, store_chkcfg);
static int altera_cvp_probe(struct pci_dev *pdev,
const struct pci_device_id *dev_id);
static void altera_cvp_remove(struct pci_dev *pdev);
#define PCI_VENDOR_ID_ALTERA 0x1172
static struct pci_device_id altera_cvp_id_tbl[] = {
{ PCI_VDEVICE(ALTERA, PCI_ANY_ID) },
{ }
};
MODULE_DEVICE_TABLE(pci, altera_cvp_id_tbl);
static struct pci_driver altera_cvp_driver = {
.name = DRV_NAME,
.id_table = altera_cvp_id_tbl,
.probe = altera_cvp_probe,
.remove = altera_cvp_remove,
};
static int altera_cvp_probe(struct pci_dev *pdev,
const struct pci_device_id *dev_id)
{
struct altera_cvp_conf *conf;
u16 cmd, val;
int ret;
/*
* First check if this is the expected FPGA device. PCI config
* space access works without enabling the PCI device, memory
* space access is enabled further down.
*/
pci_read_config_word(pdev, VSE_PCIE_EXT_CAP_ID, &val);
if (val != VSE_PCIE_EXT_CAP_ID_VAL) {
dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val);
return -ENODEV;
}
conf = devm_kzalloc(&pdev->dev, sizeof(*conf), GFP_KERNEL);
if (!conf)
return -ENOMEM;
/*
* Enable memory BAR access. We cannot use pci_enable_device() here
* because it will make the driver unusable with FPGA devices that
* have additional big IOMEM resources (e.g. 4GiB BARs) on 32-bit
* platform. Such BARs will not have an assigned address range and
* pci_enable_device() will fail, complaining about not claimed BAR,
* even if the concerned BAR is not needed for FPGA configuration
* at all. Thus, enable the device via PCI config space command.
*/
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
if (!(cmd & PCI_COMMAND_MEMORY)) {
cmd |= PCI_COMMAND_MEMORY;
pci_write_config_word(pdev, PCI_COMMAND, cmd);
}
ret = pci_request_region(pdev, CVP_BAR, "CVP");
if (ret) {
dev_err(&pdev->dev, "Requesting CVP BAR region failed\n");
goto err_disable;
}
conf->pci_dev = pdev;
conf->write_data = altera_cvp_write_data_iomem;
conf->map = pci_iomap(pdev, CVP_BAR, 0);
if (!conf->map) {
dev_warn(&pdev->dev, "Mapping CVP BAR failed\n");
conf->write_data = altera_cvp_write_data_config;
}
snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s @%s",
ALTERA_CVP_MGR_NAME, pci_name(pdev));
ret = fpga_mgr_register(&pdev->dev, conf->mgr_name,
&altera_cvp_ops, conf);
if (ret)
goto err_unmap;
ret = driver_create_file(&altera_cvp_driver.driver,
&driver_attr_chkcfg);
if (ret) {
dev_err(&pdev->dev, "Can't create sysfs chkcfg file\n");
fpga_mgr_unregister(&pdev->dev);
goto err_unmap;
}
return 0;
err_unmap:
pci_iounmap(pdev, conf->map);
pci_release_region(pdev, CVP_BAR);
err_disable:
cmd &= ~PCI_COMMAND_MEMORY;
pci_write_config_word(pdev, PCI_COMMAND, cmd);
return ret;
}
static void altera_cvp_remove(struct pci_dev *pdev)
{
struct fpga_manager *mgr = pci_get_drvdata(pdev);
struct altera_cvp_conf *conf = mgr->priv;
u16 cmd;
driver_remove_file(&altera_cvp_driver.driver, &driver_attr_chkcfg);
fpga_mgr_unregister(&pdev->dev);
pci_iounmap(pdev, conf->map);
pci_release_region(pdev, CVP_BAR);
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
cmd &= ~PCI_COMMAND_MEMORY;
pci_write_config_word(pdev, PCI_COMMAND, cmd);
}
module_pci_driver(altera_cvp_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
MODULE_DESCRIPTION("Module to load Altera FPGA over CvP");

12
drivers/fpga/altera-hps2fpga.c
View File

@ -66,7 +66,7 @@ static int alt_hps2fpga_enable_show(struct fpga_bridge *bridge)
/* The L3 REMAP register is write only, so keep a cached value. */
static unsigned int l3_remap_shadow;
static spinlock_t l3_remap_lock;
static DEFINE_SPINLOCK(l3_remap_lock);
static int _alt_hps2fpga_enable_set(struct altera_hps2fpga_data *priv,
bool enable)
@ -143,9 +143,15 @@ static int alt_fpga_bridge_probe(struct platform_device *pdev)
int ret;
of_id = of_match_device(altera_fpga_of_match, dev);
if (!of_id) {
dev_err(dev, "failed to match device\n");
return -ENODEV;
}
priv = (struct altera_hps2fpga_data *)of_id->data;
priv->bridge_reset = of_reset_control_get_by_index(dev->of_node, 0);
priv->bridge_reset = of_reset_control_get_exclusive_by_index(dev->of_node,
0);
if (IS_ERR(priv->bridge_reset)) {
dev_err(dev, "Could not get %s reset control\n", priv->name);
return PTR_ERR(priv->bridge_reset);
@ -171,8 +177,6 @@ static int alt_fpga_bridge_probe(struct platform_device *pdev)
return -EBUSY;
}
spin_lock_init(&l3_remap_lock);
if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
if (enable > 1) {
dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);

308
drivers/fpga/altera-ps-spi.c Normal file
View File

@ -0,0 +1,308 @@
/*
* Altera Passive Serial SPI Driver
*
* Copyright (c) 2017 United Western Technologies, Corporation
*
* Joshua Clayton <stillcompiling@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* Manage Altera FPGA firmware that is loaded over SPI using the passive
* serial configuration method.
* Firmware must be in binary "rbf" format.
* Works on Arria 10, Cyclone V and Stratix V. Should work on Cyclone series.
* May work on other Altera FPGAs.
*/
#include <linux/bitrev.h>
#include <linux/delay.h>
#include <linux/fpga/fpga-mgr.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/of_device.h>
#include <linux/spi/spi.h>
#include <linux/sizes.h>
enum altera_ps_devtype {
CYCLONE5,
ARRIA10,
};
struct altera_ps_data {
enum altera_ps_devtype devtype;
int status_wait_min_us;
int status_wait_max_us;
int t_cfg_us;
int t_st2ck_us;
};
struct altera_ps_conf {
struct gpio_desc *config;
struct gpio_desc *confd;
struct gpio_desc *status;
struct spi_device *spi;
const struct altera_ps_data *data;
u32 info_flags;
char mgr_name[64];
};
/* | Arria 10 | Cyclone5 | Stratix5 |
* t_CF2ST0 | [; 600] | [; 600] | [; 600] |ns
* t_CFG | [2;] | [2;] | [2;] |µs
* t_STATUS | [268; 3000] | [268; 1506] | [268; 1506] |µs
* t_CF2ST1 | [; 3000] | [; 1506] | [; 1506] |µs
* t_CF2CK | [3010;] | [1506;] | [1506;] |µs
* t_ST2CK | [10;] | [2;] | [2;] |µs
* t_CD2UM | [175; 830] | [175; 437] | [175; 437] |µs
*/
static struct altera_ps_data c5_data = {
/* these values for Cyclone5 are compatible with Stratix5 */
.devtype = CYCLONE5,
.status_wait_min_us = 268,
.status_wait_max_us = 1506,
.t_cfg_us = 2,
.t_st2ck_us = 2,
};
static struct altera_ps_data a10_data = {
.devtype = ARRIA10,
.status_wait_min_us = 268, /* min(t_STATUS) */
.status_wait_max_us = 3000, /* max(t_CF2ST1) */
.t_cfg_us = 2, /* max { min(t_CFG), max(tCF2ST0) } */
.t_st2ck_us = 10, /* min(t_ST2CK) */
};
static const struct of_device_id of_ef_match[] = {
{ .compatible = "altr,fpga-passive-serial", .data = &c5_data },
{ .compatible = "altr,fpga-arria10-passive-serial", .data = &a10_data },
{}
};
MODULE_DEVICE_TABLE(of, of_ef_match);
static enum fpga_mgr_states altera_ps_state(struct fpga_manager *mgr)
{
struct altera_ps_conf *conf = mgr->priv;
if (gpiod_get_value_cansleep(conf->status))
return FPGA_MGR_STATE_RESET;
return FPGA_MGR_STATE_UNKNOWN;
}
static inline void altera_ps_delay(int delay_us)
{
if (delay_us > 10)
usleep_range(delay_us, delay_us + 5);
else
udelay(delay_us);
}
static int altera_ps_write_init(struct fpga_manager *mgr,
struct fpga_image_info *info,
const char *buf, size_t count)
{
struct altera_ps_conf *conf = mgr->priv;
int min, max, waits;
int i;
conf->info_flags = info->flags;
if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
return -EINVAL;
}
gpiod_set_value_cansleep(conf->config, 1);
/* wait min reset pulse time */
altera_ps_delay(conf->data->t_cfg_us);
if (!gpiod_get_value_cansleep(conf->status)) {
dev_err(&mgr->dev, "Status pin failed to show a reset\n");
return -EIO;
}
gpiod_set_value_cansleep(conf->config, 0);
min = conf->data->status_wait_min_us;
max = conf->data->status_wait_max_us;
waits = max / min;
if (max % min)
waits++;
/* wait for max { max(t_STATUS), max(t_CF2ST1) } */
for (i = 0; i < waits; i++) {
usleep_range(min, min + 10);
if (!gpiod_get_value_cansleep(conf->status)) {
/* wait for min(t_ST2CK)*/
altera_ps_delay(conf->data->t_st2ck_us);
return 0;
}
}
dev_err(&mgr->dev, "Status pin not ready.\n");
return -EIO;
}
static void rev_buf(char *buf, size_t len)
{
u32 *fw32 = (u32 *)buf;
size_t extra_bytes = (len & 0x03);
const u32 *fw_end = (u32 *)(buf + len - extra_bytes);
/* set buffer to lsb first */
while (fw32 < fw_end) {
*fw32 = bitrev8x4(*fw32);
fw32++;
}
if (extra_bytes) {
buf = (char *)fw_end;
while (extra_bytes) {
*buf = bitrev8(*buf);
buf++;
extra_bytes--;
}
}
}
static int altera_ps_write(struct fpga_manager *mgr, const char *buf,
size_t count)
{
struct altera_ps_conf *conf = mgr->priv;
const char *fw_data = buf;
const char *fw_data_end = fw_data + count;
while (fw_data < fw_data_end) {
int ret;
size_t stride = min_t(size_t, fw_data_end - fw_data, SZ_4K);
if (!(conf->info_flags & FPGA_MGR_BITSTREAM_LSB_FIRST))
rev_buf((char *)fw_data, stride);
ret = spi_write(conf->spi, fw_data, stride);
if (ret) {
dev_err(&mgr->dev, "spi error in firmware write: %d\n",
ret);
return ret;
}
fw_data += stride;
}
return 0;
}
static int altera_ps_write_complete(struct fpga_manager *mgr,
struct fpga_image_info *info)
{
struct altera_ps_conf *conf = mgr->priv;
const char dummy[] = {0};
int ret;
if (gpiod_get_value_cansleep(conf->status)) {
dev_err(&mgr->dev, "Error during configuration.\n");
return -EIO;
}
if (!IS_ERR(conf->confd)) {
if (!gpiod_get_raw_value_cansleep(conf->confd)) {
dev_err(&mgr->dev, "CONF_DONE is inactive!\n");
return -EIO;
}
}
/*
* After CONF_DONE goes high, send two additional falling edges on DCLK
* to begin initialization and enter user mode
*/
ret = spi_write(conf->spi, dummy, 1);
if (ret) {
dev_err(&mgr->dev, "spi error during end sequence: %d\n", ret);
return ret;
}
return 0;
}
static const struct fpga_manager_ops altera_ps_ops = {
.state = altera_ps_state,
.write_init = altera_ps_write_init,
.write = altera_ps_write,
.write_complete = altera_ps_write_complete,
};
static int altera_ps_probe(struct spi_device *spi)
{
struct altera_ps_conf *conf;
const struct of_device_id *of_id;
conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
if (!conf)
return -ENOMEM;
of_id = of_match_device(of_ef_match, &spi->dev);
if (!of_id)
return -ENODEV;
conf->data = of_id->data;
conf->spi = spi;
conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_HIGH);
if (IS_ERR(conf->config)) {
dev_err(&spi->dev, "Failed to get config gpio: %ld\n",
PTR_ERR(conf->config));
return PTR_ERR(conf->config);
}
conf->status = devm_gpiod_get(&spi->dev, "nstat", GPIOD_IN);
if (IS_ERR(conf->status)) {
dev_err(&spi->dev, "Failed to get status gpio: %ld\n",
PTR_ERR(conf->status));
return PTR_ERR(conf->status);
}
conf->confd = devm_gpiod_get(&spi->dev, "confd", GPIOD_IN);
if (IS_ERR(conf->confd)) {
dev_warn(&spi->dev, "Not using confd gpio: %ld\n",
PTR_ERR(conf->confd));
}
/* Register manager with unique name */
snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s %s",
dev_driver_string(&spi->dev), dev_name(&spi->dev));
return fpga_mgr_register(&spi->dev, conf->mgr_name,
&altera_ps_ops, conf);
}
static int altera_ps_remove(struct spi_device *spi)
{
fpga_mgr_unregister(&spi->dev);
return 0;
}
static const struct spi_device_id altera_ps_spi_ids[] = {
{"cyclone-ps-spi", 0},
{}
};
MODULE_DEVICE_TABLE(spi, altera_ps_spi_ids);
static struct spi_driver altera_ps_driver = {
.driver = {
.name = "altera-ps-spi",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(of_ef_match),
},
.id_table = altera_ps_spi_ids,
.probe = altera_ps_probe,
.remove = altera_ps_remove,
};
module_spi_driver(altera_ps_driver)
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Joshua Clayton <stillcompiling@gmail.com>");
MODULE_DESCRIPTION("Module to load Altera FPGA firmware over SPI");

4
drivers/fpga/fpga-region.c
View File

@ -319,8 +319,8 @@ static int child_regions_with_firmware(struct device_node *overlay)
of_node_put(child_region);
if (ret)
pr_err("firmware-name not allowed in child FPGA region: %s",
child_region->full_name);
pr_err("firmware-name not allowed in child FPGA region: %pOF",
child_region);
return ret;
}

4
drivers/fsi/fsi-core.c
View File

@ -475,7 +475,7 @@ static ssize_t fsi_slave_sysfs_raw_write(struct file *file,
return count;
}
static struct bin_attribute fsi_slave_raw_attr = {
static const struct bin_attribute fsi_slave_raw_attr = {
.attr = {
.name = "raw",
.mode = 0600,
@ -499,7 +499,7 @@ static ssize_t fsi_slave_sysfs_term_write(struct file *file,
return count;
}
static struct bin_attribute fsi_slave_term_attr = {
static const struct bin_attribute fsi_slave_term_attr = {
.attr = {
.name = "term",
.mode = 0200,

10
drivers/fsi/fsi-scom.c
View File

@ -57,12 +57,6 @@ static int put_scom(struct scom_device *scom_dev, uint64_t value,
int rc;
uint32_t data;
data = cpu_to_be32(SCOM_RESET_CMD);
rc = fsi_device_write(scom_dev->fsi_dev, SCOM_RESET_REG, &data,
sizeof(uint32_t));
if (rc)
return rc;
data = cpu_to_be32((value >> 32) & 0xffffffff);
rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
sizeof(uint32_t));
@ -186,6 +180,7 @@ static const struct file_operations scom_fops = {
static int scom_probe(struct device *dev)
{
uint32_t data;
struct fsi_device *fsi_dev = to_fsi_dev(dev);
struct scom_device *scom;
@ -202,6 +197,9 @@ static int scom_probe(struct device *dev)
scom->mdev.parent = dev;
list_add(&scom->link, &scom_devices);
data = cpu_to_be32(SCOM_RESET_CMD);
fsi_device_write(fsi_dev, SCOM_RESET_REG, &data, sizeof(uint32_t));
return misc_register(&scom->mdev);
}

14
drivers/hv/channel.c
View File

@ -177,6 +177,11 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size,
&vmbus_connection.chn_msg_list);
spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
if (newchannel->rescind) {
err = -ENODEV;
goto error_free_gpadl;
}
ret = vmbus_post_msg(open_msg,
sizeof(struct vmbus_channel_open_channel), true);
@ -421,6 +426,11 @@ int vmbus_establish_gpadl(struct vmbus_channel *channel, void *kbuffer,
spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
if (channel->rescind) {
ret = -ENODEV;
goto cleanup;
}
ret = vmbus_post_msg(gpadlmsg, msginfo->msgsize -
sizeof(*msginfo), true);
if (ret != 0)
@ -494,6 +504,10 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
list_add_tail(&info->msglistentry,
&vmbus_connection.chn_msg_list);
spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
if (channel->rescind)
goto post_msg_err;
ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown),
true);

29
drivers/hv/channel_mgmt.c
View File

@ -451,6 +451,12 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
/* Make sure this is a new offer */
mutex_lock(&vmbus_connection.channel_mutex);
/*
* Now that we have acquired the channel_mutex,
* we can release the potentially racing rescind thread.
*/
atomic_dec(&vmbus_connection.offer_in_progress);
list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) {
if (!uuid_le_cmp(channel->offermsg.offer.if_type,
newchannel->offermsg.offer.if_type) &&
@ -481,7 +487,6 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
channel->num_sc++;
spin_unlock_irqrestore(&channel->lock, flags);
} else {
atomic_dec(&vmbus_connection.offer_in_progress);
goto err_free_chan;
}
}
@ -510,7 +515,6 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
if (!fnew) {
if (channel->sc_creation_callback != NULL)
channel->sc_creation_callback(newchannel);
atomic_dec(&vmbus_connection.offer_in_progress);
return;
}
@ -541,7 +545,7 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
goto err_deq_chan;
}
atomic_dec(&vmbus_connection.offer_in_progress);
newchannel->probe_done = true;
return;
err_deq_chan:
@ -882,8 +886,27 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr)
channel->rescind = true;
spin_unlock_irqrestore(&channel->lock, flags);
/*
* Now that we have posted the rescind state, perform
* rescind related cleanup.
*/
vmbus_rescind_cleanup(channel);
/*
* Now wait for offer handling to complete.
*/
while (READ_ONCE(channel->probe_done) == false) {
/*
* We wait here until any channel offer is currently
* being processed.
*/
msleep(1);
}
/*
* At this point, the rescind handling can proceed safely.
*/
if (channel->device_obj) {
if (channel->chn_rescind_callback) {
channel->chn_rescind_callback(channel);

12
drivers/hv/hv_balloon.c
View File

@ -584,10 +584,6 @@ static int hv_memory_notifier(struct notifier_block *nb, unsigned long val,
switch (val) {
case MEM_ONLINE:
spin_lock_irqsave(&dm_device.ha_lock, flags);
dm_device.num_pages_onlined += mem->nr_pages;
spin_unlock_irqrestore(&dm_device.ha_lock, flags);
/* Fall through */
case MEM_CANCEL_ONLINE:
if (dm_device.ha_waiting) {
dm_device.ha_waiting = false;
@ -644,6 +640,9 @@ static void hv_page_online_one(struct hv_hotadd_state *has, struct page *pg)
__online_page_set_limits(pg);
__online_page_increment_counters(pg);
__online_page_free(pg);
WARN_ON_ONCE(!spin_is_locked(&dm_device.ha_lock));
dm_device.num_pages_onlined++;
}
static void hv_bring_pgs_online(struct hv_hotadd_state *has,
@ -1036,8 +1035,8 @@ static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg)
if (info_hdr->data_size == sizeof(__u64)) {
__u64 *max_page_count = (__u64 *)&info_hdr[1];
pr_info("INFO_TYPE_MAX_PAGE_CNT = %llu\n",
*max_page_count);
pr_info("Max. dynamic memory size: %llu MB\n",
(*max_page_count) >> (20 - PAGE_SHIFT));
}
break;
@ -1656,6 +1655,7 @@ static int balloon_probe(struct hv_device *dev,
}
dm_device.state = DM_INITIALIZED;
last_post_time = jiffies;
return 0;

2
drivers/hv/hv_kvp.c
View File

@ -304,7 +304,7 @@ static int process_ob_ipinfo(void *in_msg, void *out_msg, int op)
strlen((char *)in->body.kvp_ip_val.adapter_id),
UTF16_HOST_ENDIAN,
(wchar_t *)out->kvp_ip_val.adapter_id,
MAX_IP_ADDR_SIZE);
MAX_ADAPTER_ID_SIZE);
if (len < 0)
return len;

167
drivers/hv/ring_buffer.c
View File

@ -29,6 +29,7 @@
#include <linux/uio.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/prefetch.h>
#include "hyperv_vmbus.h"
@ -94,30 +95,6 @@ hv_set_next_write_location(struct hv_ring_buffer_info *ring_info,
ring_info->ring_buffer->write_index = next_write_location;
}
/* Get the next read location for the specified ring buffer. */
static inline u32
hv_get_next_read_location(const struct hv_ring_buffer_info *ring_info)
{
return ring_info->ring_buffer->read_index;
}
/*
* Get the next read location + offset for the specified ring buffer.
* This allows the caller to skip.
*/
static inline u32
hv_get_next_readlocation_withoffset(const struct hv_ring_buffer_info *ring_info,
u32 offset)
{
u32 next = ring_info->ring_buffer->read_index;
next += offset;
if (next >= ring_info->ring_datasize)
next -= ring_info->ring_datasize;
return next;
}
/* Set the next read location for the specified ring buffer. */
static inline void
hv_set_next_read_location(struct hv_ring_buffer_info *ring_info,
@ -141,29 +118,6 @@ hv_get_ring_bufferindices(struct hv_ring_buffer_info *ring_info)
return (u64)ring_info->ring_buffer->write_index << 32;
}
/*
* Helper routine to copy to source from ring buffer.
* Assume there is enough room. Handles wrap-around in src case only!!
*/
static u32 hv_copyfrom_ringbuffer(
const struct hv_ring_buffer_info *ring_info,
void *dest,
u32 destlen,
u32 start_read_offset)
{
void *ring_buffer = hv_get_ring_buffer(ring_info);
u32 ring_buffer_size = hv_get_ring_buffersize(ring_info);
memcpy(dest, ring_buffer + start_read_offset, destlen);
start_read_offset += destlen;
if (start_read_offset >= ring_buffer_size)
start_read_offset -= ring_buffer_size;
return start_read_offset;
}
/*
* Helper routine to copy from source to ring buffer.
* Assume there is enough room. Handles wrap-around in dest case only!!
@ -334,33 +288,22 @@ int hv_ringbuffer_write(struct vmbus_channel *channel,
return 0;
}
static inline void
init_cached_read_index(struct hv_ring_buffer_info *rbi)
{
rbi->cached_read_index = rbi->ring_buffer->read_index;
}
int hv_ringbuffer_read(struct vmbus_channel *channel,
void *buffer, u32 buflen, u32 *buffer_actual_len,
u64 *requestid, bool raw)
{
u32 bytes_avail_toread;
u32 next_read_location;
u64 prev_indices = 0;
struct vmpacket_descriptor desc;
u32 offset;
u32 packetlen;
struct hv_ring_buffer_info *inring_info = &channel->inbound;
struct vmpacket_descriptor *desc;
u32 packetlen, offset;
if (buflen <= 0)
if (unlikely(buflen == 0))
return -EINVAL;
*buffer_actual_len = 0;
*requestid = 0;
bytes_avail_toread = hv_get_bytes_to_read(inring_info);
/* Make sure there is something to read */
if (bytes_avail_toread < sizeof(desc)) {
desc = hv_pkt_iter_first(channel);
if (desc == NULL) {
/*
* No error is set when there is even no header, drivers are
* supposed to analyze buffer_actual_len.
@ -368,48 +311,22 @@ int hv_ringbuffer_read(struct vmbus_channel *channel,
return 0;
}
init_cached_read_index(inring_info);
next_read_location = hv_get_next_read_location(inring_info);
next_read_location = hv_copyfrom_ringbuffer(inring_info, &desc,
sizeof(desc),
next_read_location);
offset = raw ? 0 : (desc.offset8 << 3);
packetlen = (desc.len8 << 3) - offset;
offset = raw ? 0 : (desc->offset8 << 3);
packetlen = (desc->len8 << 3) - offset;
*buffer_actual_len = packetlen;
*requestid = desc.trans_id;
*requestid = desc->trans_id;
if (bytes_avail_toread < packetlen + offset)
return -EAGAIN;
if (packetlen > buflen)
if (unlikely(packetlen > buflen))
return -ENOBUFS;
next_read_location =
hv_get_next_readlocation_withoffset(inring_info, offset);
/* since ring is double mapped, only one copy is necessary */
memcpy(buffer, (const char *)desc + offset, packetlen);
next_read_location = hv_copyfrom_ringbuffer(inring_info,
buffer,
packetlen,
next_read_location);
/* Advance ring index to next packet descriptor */
__hv_pkt_iter_next(channel, desc);
next_read_location = hv_copyfrom_ringbuffer(inring_info,
&prev_indices,
sizeof(u64),
next_read_location);
/*
* Make sure all reads are done before we update the read index since
* the writer may start writing to the read area once the read index
* is updated.
*/
virt_mb();
/* Update the read index */
hv_set_next_read_location(inring_info, next_read_location);
hv_signal_on_read(channel);
/* Notify host of update */
hv_pkt_iter_close(channel);
return 0;
}
@ -440,14 +357,16 @@ static u32 hv_pkt_iter_avail(const struct hv_ring_buffer_info *rbi)
struct vmpacket_descriptor *hv_pkt_iter_first(struct vmbus_channel *channel)
{
struct hv_ring_buffer_info *rbi = &channel->inbound;
/* set state for later hv_signal_on_read() */
init_cached_read_index(rbi);
struct vmpacket_descriptor *desc;
if (hv_pkt_iter_avail(rbi) < sizeof(struct vmpacket_descriptor))
return NULL;
return hv_get_ring_buffer(rbi) + rbi->priv_read_index;
desc = hv_get_ring_buffer(rbi) + rbi->priv_read_index;
if (desc)
prefetch((char *)desc + (desc->len8 << 3));
return desc;
}
EXPORT_SYMBOL_GPL(hv_pkt_iter_first);
@ -471,10 +390,7 @@ __hv_pkt_iter_next(struct vmbus_channel *channel,
rbi->priv_read_index -= dsize;
/* more data? */
if (hv_pkt_iter_avail(rbi) < sizeof(struct vmpacket_descriptor))
return NULL;
else
return hv_get_ring_buffer(rbi) + rbi->priv_read_index;
return hv_pkt_iter_first(channel);
}
EXPORT_SYMBOL_GPL(__hv_pkt_iter_next);
@ -484,6 +400,7 @@ EXPORT_SYMBOL_GPL(__hv_pkt_iter_next);
void hv_pkt_iter_close(struct vmbus_channel *channel)
{
struct hv_ring_buffer_info *rbi = &channel->inbound;
u32 orig_write_sz = hv_get_bytes_to_write(rbi);
/*
* Make sure all reads are done before we update the read index since
@ -493,6 +410,40 @@ void hv_pkt_iter_close(struct vmbus_channel *channel)
virt_rmb();
rbi->ring_buffer->read_index = rbi->priv_read_index;
hv_signal_on_read(channel);
/*
* Issue a full memory barrier before making the signaling decision.
* Here is the reason for having this barrier:
* If the reading of the pend_sz (in this function)
* were to be reordered and read before we commit the new read
* index (in the calling function) we could
* have a problem. If the host were to set the pending_sz after we
* have sampled pending_sz and go to sleep before we commit the
* read index, we could miss sending the interrupt. Issue a full
* memory barrier to address this.
*/
virt_mb();
/* If host has disabled notifications then skip */
if (rbi->ring_buffer->interrupt_mask)
return;
if (rbi->ring_buffer->feature_bits.feat_pending_send_sz) {
u32 pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz);
/*
* If there was space before we began iteration,
* then host was not blocked. Also handles case where
* pending_sz is zero then host has nothing pending
* and does not need to be signaled.
*/
if (orig_write_sz > pending_sz)
return;
/* If pending write will not fit, don't give false hope. */
if (hv_get_bytes_to_write(rbi) < pending_sz)
return;
}
vmbus_setevent(channel);
}
EXPORT_SYMBOL_GPL(hv_pkt_iter_close);

3
drivers/hv/vmbus_drv.c
View File

@ -940,6 +940,9 @@ static void vmbus_chan_sched(struct hv_per_cpu_context *hv_cpu)
if (channel->offermsg.child_relid != relid)
continue;
if (channel->rescind)
continue;
switch (channel->callback_mode) {
case HV_CALL_ISR:
vmbus_channel_isr(channel);

10
drivers/hwtracing/coresight/Kconfig
View File

@ -70,13 +70,13 @@ config CORESIGHT_SOURCE_ETM4X
for instruction level tracing. Depending on the implemented version
data tracing may also be available.
config CORESIGHT_QCOM_REPLICATOR
bool "Qualcomm CoreSight Replicator driver"
config CORESIGHT_DYNAMIC_REPLICATOR
bool "CoreSight Programmable Replicator driver"
depends on CORESIGHT_LINKS_AND_SINKS
help
This enables support for Qualcomm CoreSight link driver. The
programmable ATB replicator sends the ATB trace stream from the
ETB/ETF to the TPIUi and ETR.
This enables support for dynamic CoreSight replicator link driver.
The programmable ATB replicator allows independent filtering of the
trace data based on the traceid.
config CORESIGHT_STM
bool "CoreSight System Trace Macrocell driver"

2
drivers/hwtracing/coresight/Makefile
View File

@ -14,6 +14,6 @@ obj-$(CONFIG_CORESIGHT_SOURCE_ETM3X) += coresight-etm3x.o coresight-etm-cp14.o \
coresight-etm3x-sysfs.o
obj-$(CONFIG_CORESIGHT_SOURCE_ETM4X) += coresight-etm4x.o \
coresight-etm4x-sysfs.o
obj-$(CONFIG_CORESIGHT_QCOM_REPLICATOR) += coresight-replicator-qcom.o
obj-$(CONFIG_CORESIGHT_DYNAMIC_REPLICATOR) += coresight-dynamic-replicator.o
obj-$(CONFIG_CORESIGHT_STM) += coresight-stm.o
obj-$(CONFIG_CORESIGHT_CPU_DEBUG) += coresight-cpu-debug.o

2
drivers/hwtracing/coresight/coresight-cpu-debug.c
View File

@ -667,7 +667,7 @@ static int debug_remove(struct amba_device *adev)
return 0;
}
static struct amba_id debug_ids[] = {
static const struct amba_id debug_ids[] = {
{ /* Debug for Cortex-A53 */
.id = 0x000bbd03,
.mask = 0x000fffff,

34
drivers/hwtracing/coresight/coresight-replicator-qcom.c → drivers/hwtracing/coresight/coresight-dynamic-replicator.c
View File

@ -95,6 +95,28 @@ static const struct coresight_ops replicator_cs_ops = {
.link_ops = &replicator_link_ops,
};
#define coresight_replicator_reg(name, offset) \
coresight_simple_reg32(struct replicator_state, name, offset)
coresight_replicator_reg(idfilter0, REPLICATOR_IDFILTER0);
coresight_replicator_reg(idfilter1, REPLICATOR_IDFILTER1);
static struct attribute *replicator_mgmt_attrs[] = {
&dev_attr_idfilter0.attr,
&dev_attr_idfilter1.attr,
NULL,
};
static const struct attribute_group replicator_mgmt_group = {
.attrs = replicator_mgmt_attrs,
.name = "mgmt",
};
static const struct attribute_group *replicator_groups[] = {
&replicator_mgmt_group,
NULL,
};
static int replicator_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret;
@ -139,11 +161,11 @@ static int replicator_probe(struct amba_device *adev, const struct amba_id *id)
desc.ops = &replicator_cs_ops;
desc.pdata = adev->dev.platform_data;
desc.dev = &adev->dev;
desc.groups = replicator_groups;
drvdata->csdev = coresight_register(&desc);
if (IS_ERR(drvdata->csdev))
return PTR_ERR(drvdata->csdev);
dev_info(dev, "%s initialized\n", (char *)id->data);
return 0;
}
@ -175,18 +197,22 @@ static const struct dev_pm_ops replicator_dev_pm_ops = {
NULL)
};
static struct amba_id replicator_ids[] = {
static const struct amba_id replicator_ids[] = {
{
.id = 0x0003b909,
.mask = 0x0003ffff,
.data = "REPLICATOR 1.0",
},
{
/* Coresight SoC-600 */
.id = 0x000bb9ec,
.mask = 0x000fffff,
},
{ 0, 0 },
};
static struct amba_driver replicator_driver = {
.drv = {
.name = "coresight-replicator-qcom",
.name = "coresight-dynamic-replicator",
.pm = &replicator_dev_pm_ops,
.suppress_bind_attrs = true,
},

68
drivers/hwtracing/coresight/coresight-etb10.c
View File

@ -200,8 +200,10 @@ static void etb_disable_hw(struct etb_drvdata *drvdata)
static void etb_dump_hw(struct etb_drvdata *drvdata)
{
bool lost = false;
int i;
u8 *buf_ptr;
const u32 *barrier;
u32 read_data, depth;
u32 read_ptr, write_ptr;
u32 frame_off, frame_endoff;
@ -223,20 +225,26 @@ static void etb_dump_hw(struct etb_drvdata *drvdata)
}
if ((readl_relaxed(drvdata->base + ETB_STATUS_REG)
& ETB_STATUS_RAM_FULL) == 0)
& ETB_STATUS_RAM_FULL) == 0) {
writel_relaxed(0x0, drvdata->base + ETB_RAM_READ_POINTER);
else
} else {
writel_relaxed(write_ptr, drvdata->base + ETB_RAM_READ_POINTER);
lost = true;
}
depth = drvdata->buffer_depth;
buf_ptr = drvdata->buf;
barrier = barrier_pkt;
for (i = 0; i < depth; i++) {
read_data = readl_relaxed(drvdata->base +
ETB_RAM_READ_DATA_REG);
*buf_ptr++ = read_data >> 0;
*buf_ptr++ = read_data >> 8;
*buf_ptr++ = read_data >> 16;
*buf_ptr++ = read_data >> 24;
if (lost && *barrier) {
read_data = *barrier;
barrier++;
}
*(u32 *)buf_ptr = read_data;
buf_ptr += 4;
}
if (frame_off) {
@ -353,8 +361,10 @@ static void etb_update_buffer(struct coresight_device *csdev,
struct perf_output_handle *handle,
void *sink_config)
{
bool lost = false;
int i, cur;
u8 *buf_ptr;
const u32 *barrier;
u32 read_ptr, write_ptr, capacity;
u32 status, read_data, to_read;
unsigned long offset;
@ -366,8 +376,8 @@ static void etb_update_buffer(struct coresight_device *csdev,
capacity = drvdata->buffer_depth * ETB_FRAME_SIZE_WORDS;
CS_UNLOCK(drvdata->base);
etb_disable_hw(drvdata);
CS_UNLOCK(drvdata->base);
/* unit is in words, not bytes */
read_ptr = readl_relaxed(drvdata->base + ETB_RAM_READ_POINTER);
@ -384,7 +394,7 @@ static void etb_update_buffer(struct coresight_device *csdev,
(unsigned long)write_ptr);
write_ptr &= ~(ETB_FRAME_SIZE_WORDS - 1);
perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
lost = true;
}
/*
@ -395,7 +405,7 @@ static void etb_update_buffer(struct coresight_device *csdev,
*/
status = readl_relaxed(drvdata->base + ETB_STATUS_REG);
if (status & ETB_STATUS_RAM_FULL) {
perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
lost = true;
to_read = capacity;
read_ptr = write_ptr;
} else {
@ -428,22 +438,30 @@ static void etb_update_buffer(struct coresight_device *csdev,
if (read_ptr > (drvdata->buffer_depth - 1))
read_ptr -= drvdata->buffer_depth;
/* let the decoder know we've skipped ahead */
perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
lost = true;
}
if (lost)
perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
/* finally tell HW where we want to start reading from */
writel_relaxed(read_ptr, drvdata->base + ETB_RAM_READ_POINTER);
cur = buf->cur;
offset = buf->offset;
barrier = barrier_pkt;
for (i = 0; i < to_read; i += 4) {
buf_ptr = buf->data_pages[cur] + offset;
read_data = readl_relaxed(drvdata->base +
ETB_RAM_READ_DATA_REG);
*buf_ptr++ = read_data >> 0;
*buf_ptr++ = read_data >> 8;
*buf_ptr++ = read_data >> 16;
*buf_ptr++ = read_data >> 24;
if (lost && *barrier) {
read_data = *barrier;
barrier++;
}
*(u32 *)buf_ptr = read_data;
buf_ptr += 4;
offset += 4;
if (offset >= PAGE_SIZE) {
@ -557,17 +575,17 @@ static const struct file_operations etb_fops = {
.llseek = no_llseek,
};
#define coresight_etb10_simple_func(name, offset) \
coresight_simple_func(struct etb_drvdata, NULL, name, offset)
#define coresight_etb10_reg(name, offset) \
coresight_simple_reg32(struct etb_drvdata, name, offset)
coresight_etb10_simple_func(rdp, ETB_RAM_DEPTH_REG);
coresight_etb10_simple_func(sts, ETB_STATUS_REG);
coresight_etb10_simple_func(rrp, ETB_RAM_READ_POINTER);
coresight_etb10_simple_func(rwp, ETB_RAM_WRITE_POINTER);
coresight_etb10_simple_func(trg, ETB_TRG);
coresight_etb10_simple_func(ctl, ETB_CTL_REG);
coresight_etb10_simple_func(ffsr, ETB_FFSR);
coresight_etb10_simple_func(ffcr, ETB_FFCR);
coresight_etb10_reg(rdp, ETB_RAM_DEPTH_REG);
coresight_etb10_reg(sts, ETB_STATUS_REG);
coresight_etb10_reg(rrp, ETB_RAM_READ_POINTER);
coresight_etb10_reg(rwp, ETB_RAM_WRITE_POINTER);
coresight_etb10_reg(trg, ETB_TRG);
coresight_etb10_reg(ctl, ETB_CTL_REG);
coresight_etb10_reg(ffsr, ETB_FFSR);
coresight_etb10_reg(ffcr, ETB_FFCR);
static struct attribute *coresight_etb_mgmt_attrs[] = {
&dev_attr_rdp.attr,
@ -728,7 +746,7 @@ static const struct dev_pm_ops etb_dev_pm_ops = {
SET_RUNTIME_PM_OPS(etb_runtime_suspend, etb_runtime_resume, NULL)
};
static struct amba_id etb_ids[] = {
static const struct amba_id etb_ids[] = {
{
.id = 0x0003b907,
.mask = 0x0003ffff,

4
drivers/hwtracing/coresight/coresight-etm-perf.c
View File

@ -53,14 +53,16 @@ static DEFINE_PER_CPU(struct coresight_device *, csdev_src);
/* ETMv3.5/PTM's ETMCR is 'config' */
PMU_FORMAT_ATTR(cycacc, "config:" __stringify(ETM_OPT_CYCACC));
PMU_FORMAT_ATTR(timestamp, "config:" __stringify(ETM_OPT_TS));
PMU_FORMAT_ATTR(retstack, "config:" __stringify(ETM_OPT_RETSTK));
static struct attribute *etm_config_formats_attr[] = {
&format_attr_cycacc.attr,
&format_attr_timestamp.attr,
&format_attr_retstack.attr,
NULL,
};
static struct attribute_group etm_pmu_format_group = {
static const struct attribute_group etm_pmu_format_group = {
.name = "format",
.attrs = etm_config_formats_attr,
};

1
drivers/hwtracing/coresight/coresight-etm.h
View File

@ -106,6 +106,7 @@
#define ETMTECR1_START_STOP BIT(25)
/* ETMCCER - 0x1E8 */
#define ETMCCER_TIMESTAMP BIT(22)
#define ETMCCER_RETSTACK BIT(23)
#define ETM_MODE_EXCLUDE BIT(0)
#define ETM_MODE_CYCACC BIT(1)

24
drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
View File

@ -1232,19 +1232,19 @@ static struct attribute *coresight_etm_attrs[] = {
NULL,
};
#define coresight_etm3x_simple_func(name, offset) \
coresight_simple_func(struct etm_drvdata, NULL, name, offset)
#define coresight_etm3x_reg(name, offset) \
coresight_simple_reg32(struct etm_drvdata, name, offset)
coresight_etm3x_simple_func(etmccr, ETMCCR);
coresight_etm3x_simple_func(etmccer, ETMCCER);
coresight_etm3x_simple_func(etmscr, ETMSCR);
coresight_etm3x_simple_func(etmidr, ETMIDR);
coresight_etm3x_simple_func(etmcr, ETMCR);
coresight_etm3x_simple_func(etmtraceidr, ETMTRACEIDR);
coresight_etm3x_simple_func(etmteevr, ETMTEEVR);
coresight_etm3x_simple_func(etmtssvr, ETMTSSCR);
coresight_etm3x_simple_func(etmtecr1, ETMTECR1);
coresight_etm3x_simple_func(etmtecr2, ETMTECR2);
coresight_etm3x_reg(etmccr, ETMCCR);
coresight_etm3x_reg(etmccer, ETMCCER);
coresight_etm3x_reg(etmscr, ETMSCR);
coresight_etm3x_reg(etmidr, ETMIDR);
coresight_etm3x_reg(etmcr, ETMCR);
coresight_etm3x_reg(etmtraceidr, ETMTRACEIDR);
coresight_etm3x_reg(etmteevr, ETMTEEVR);
coresight_etm3x_reg(etmtssvr, ETMTSSCR);
coresight_etm3x_reg(etmtecr1, ETMTECR1);
coresight_etm3x_reg(etmtecr2, ETMTECR2);
static struct attribute *coresight_etm_mgmt_attrs[] = {
&dev_attr_etmccr.attr,

22
drivers/hwtracing/coresight/coresight-etm3x.c
View File

@ -243,6 +243,8 @@ void etm_set_default(struct etm_config *config)
}
config->ctxid_mask = 0x0;
/* Setting default to 1024 as per TRM recommendation */
config->sync_freq = 0x400;
}
void etm_config_trace_mode(struct etm_config *config)
@ -308,7 +310,9 @@ void etm_config_trace_mode(struct etm_config *config)
config->addr_type[1] = ETM_ADDR_TYPE_RANGE;
}
#define ETM3X_SUPPORTED_OPTIONS (ETMCR_CYC_ACC | ETMCR_TIMESTAMP_EN)
#define ETM3X_SUPPORTED_OPTIONS (ETMCR_CYC_ACC | \
ETMCR_TIMESTAMP_EN | \
ETMCR_RETURN_STACK)
static int etm_parse_event_config(struct etm_drvdata *drvdata,
struct perf_event *event)
@ -339,14 +343,24 @@ static int etm_parse_event_config(struct etm_drvdata *drvdata,
etm_config_trace_mode(config);
/*
* At this time only cycle accurate and timestamp options are
* available.
* At this time only cycle accurate, return stack and timestamp
* options are available.
*/
if (attr->config & ~ETM3X_SUPPORTED_OPTIONS)
return -EINVAL;
config->ctrl = attr->config;
/*
* Possible to have cores with PTM (supports ret stack) and ETM
* (never has ret stack) on the same SoC. So if we have a request
* for return stack that can't be honoured on this core then
* clear the bit - trace will still continue normally
*/
if ((config->ctrl & ETMCR_RETURN_STACK) &&
!(drvdata->etmccer & ETMCCER_RETSTACK))
config->ctrl &= ~ETMCR_RETURN_STACK;
return 0;
}
@ -885,7 +899,7 @@ static const struct dev_pm_ops etm_dev_pm_ops = {
SET_RUNTIME_PM_OPS(etm_runtime_suspend, etm_runtime_resume, NULL)
};
static struct amba_id etm_ids[] = {
static const struct amba_id etm_ids[] = {
{ /* ETM 3.3 */
.id = 0x0003b921,
.mask = 0x0003ffff,

24
drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
View File

@ -2066,23 +2066,23 @@ static u32 etmv4_cross_read(const struct device *dev, u32 offset)
return reg.data;
}
#define coresight_etm4x_simple_func(name, offset) \
coresight_simple_func(struct etmv4_drvdata, NULL, name, offset)
#define coresight_etm4x_reg(name, offset) \
coresight_simple_reg32(struct etmv4_drvdata, name, offset)
#define coresight_etm4x_cross_read(name, offset) \
coresight_simple_func(struct etmv4_drvdata, etmv4_cross_read, \
name, offset)
coresight_etm4x_simple_func(trcpdcr, TRCPDCR);
coresight_etm4x_simple_func(trcpdsr, TRCPDSR);
coresight_etm4x_simple_func(trclsr, TRCLSR);
coresight_etm4x_simple_func(trcauthstatus, TRCAUTHSTATUS);
coresight_etm4x_simple_func(trcdevid, TRCDEVID);
coresight_etm4x_simple_func(trcdevtype, TRCDEVTYPE);
coresight_etm4x_simple_func(trcpidr0, TRCPIDR0);
coresight_etm4x_simple_func(trcpidr1, TRCPIDR1);
coresight_etm4x_simple_func(trcpidr2, TRCPIDR2);
coresight_etm4x_simple_func(trcpidr3, TRCPIDR3);
coresight_etm4x_reg(trcpdcr, TRCPDCR);
coresight_etm4x_reg(trcpdsr, TRCPDSR);
coresight_etm4x_reg(trclsr, TRCLSR);
coresight_etm4x_reg(trcauthstatus, TRCAUTHSTATUS);
coresight_etm4x_reg(trcdevid, TRCDEVID);
coresight_etm4x_reg(trcdevtype, TRCDEVTYPE);
coresight_etm4x_reg(trcpidr0, TRCPIDR0);
coresight_etm4x_reg(trcpidr1, TRCPIDR1);
coresight_etm4x_reg(trcpidr2, TRCPIDR2);
coresight_etm4x_reg(trcpidr3, TRCPIDR3);
coresight_etm4x_cross_read(trcoslsr, TRCOSLSR);
coresight_etm4x_cross_read(trcconfig, TRCCONFIGR);
coresight_etm4x_cross_read(trctraceid, TRCTRACEIDR);

6
drivers/hwtracing/coresight/coresight-etm4x.c
View File

@ -224,6 +224,10 @@ static int etm4_parse_event_config(struct etmv4_drvdata *drvdata,
if (attr->config & BIT(ETM_OPT_TS))
/* bit[11], Global timestamp tracing bit */
config->cfg |= BIT(11);
/* return stack - enable if selected and supported */
if ((attr->config & BIT(ETM_OPT_RETSTK)) && drvdata->retstack)
/* bit[12], Return stack enable bit */
config->cfg |= BIT(12);
out:
return ret;
@ -1048,7 +1052,7 @@ err_arch_supported:
return ret;
}
static struct amba_id etm4_ids[] = {
static const struct amba_id etm4_ids[] = {
{ /* ETM 4.0 - Cortex-A53 */
.id = 0x000bb95d,
.mask = 0x000fffff,

7
drivers/hwtracing/coresight/coresight-funnel.c
View File

@ -246,11 +246,16 @@ static const struct dev_pm_ops funnel_dev_pm_ops = {
SET_RUNTIME_PM_OPS(funnel_runtime_suspend, funnel_runtime_resume, NULL)
};
static struct amba_id funnel_ids[] = {
static const struct amba_id funnel_ids[] = {
{
.id = 0x0003b908,
.mask = 0x0003ffff,
},
{
/* Coresight SoC-600 */
.id = 0x000bb9eb,
.mask = 0x000fffff,
},
{ 0, 0},
};

39
drivers/hwtracing/coresight/coresight-priv.h
View File

@ -39,23 +39,33 @@
#define ETM_MODE_EXCL_USER BIT(31)
typedef u32 (*coresight_read_fn)(const struct device *, u32 offset);
#define coresight_simple_func(type, func, name, offset) \
#define __coresight_simple_func(type, func, name, lo_off, hi_off) \
static ssize_t name##_show(struct device *_dev, \
struct device_attribute *attr, char *buf) \
{ \
type *drvdata = dev_get_drvdata(_dev->parent); \
coresight_read_fn fn = func; \
u32 val; \
u64 val; \
pm_runtime_get_sync(_dev->parent); \
if (fn) \
val = fn(_dev->parent, offset); \
val = (u64)fn(_dev->parent, lo_off); \
else \
val = readl_relaxed(drvdata->base + offset); \
val = coresight_read_reg_pair(drvdata->base, \
lo_off, hi_off); \
pm_runtime_put_sync(_dev->parent); \
return scnprintf(buf, PAGE_SIZE, "0x%x\n", val); \
return scnprintf(buf, PAGE_SIZE, "0x%llx\n", val); \
} \
static DEVICE_ATTR_RO(name)
#define coresight_simple_func(type, func, name, offset) \
__coresight_simple_func(type, func, name, offset, -1)
#define coresight_simple_reg32(type, name, offset) \
__coresight_simple_func(type, NULL, name, offset, -1)
#define coresight_simple_reg64(type, name, lo_off, hi_off) \
__coresight_simple_func(type, NULL, name, lo_off, hi_off)
extern const u32 barrier_pkt[5];
enum etm_addr_type {
ETM_ADDR_TYPE_NONE,
ETM_ADDR_TYPE_SINGLE,
@ -106,6 +116,25 @@ static inline void CS_UNLOCK(void __iomem *addr)
} while (0);
}
static inline u64
coresight_read_reg_pair(void __iomem *addr, s32 lo_offset, s32 hi_offset)
{
u64 val;
val = readl_relaxed(addr + lo_offset);
val |= (hi_offset < 0) ? 0 :
(u64)readl_relaxed(addr + hi_offset) << 32;
return val;
}
static inline void coresight_write_reg_pair(void __iomem *addr, u64 val,
s32 lo_offset, s32 hi_offset)
{
writel_relaxed((u32)val, addr + lo_offset);
if (hi_offset >= 0)
writel_relaxed((u32)(val >> 32), addr + hi_offset);
}
void coresight_disable_path(struct list_head *path);
int coresight_enable_path(struct list_head *path, u32 mode);
struct coresight_device *coresight_get_sink(struct list_head *path);

47
drivers/hwtracing/coresight/coresight-stm.c
View File

@ -276,7 +276,7 @@ static void stm_disable(struct coresight_device *csdev,
spin_unlock(&drvdata->spinlock);
/* Wait until the engine has completely stopped */
coresight_timeout(drvdata, STMTCSR, STMTCSR_BUSY_BIT, 0);
coresight_timeout(drvdata->base, STMTCSR, STMTCSR_BUSY_BIT, 0);
pm_runtime_put(drvdata->dev);
@ -307,7 +307,8 @@ static inline bool stm_addr_unaligned(const void *addr, u8 write_bytes)
return ((unsigned long)addr & (write_bytes - 1));
}
static void stm_send(void *addr, const void *data, u32 size, u8 write_bytes)
static void stm_send(void __iomem *addr, const void *data,
u32 size, u8 write_bytes)
{
u8 paload[8];
@ -414,7 +415,7 @@ static ssize_t notrace stm_generic_packet(struct stm_data *stm_data,
unsigned int size,
const unsigned char *payload)
{
unsigned long ch_addr;
void __iomem *ch_addr;
struct stm_drvdata *drvdata = container_of(stm_data,
struct stm_drvdata, stm);
@ -424,7 +425,7 @@ static ssize_t notrace stm_generic_packet(struct stm_data *stm_data,
if (channel >= drvdata->numsp)
return -EINVAL;
ch_addr = (unsigned long)stm_channel_addr(drvdata, channel);
ch_addr = stm_channel_addr(drvdata, channel);
flags = (flags == STP_PACKET_TIMESTAMPED) ? STM_FLAG_TIMESTAMPED : 0;
flags |= test_bit(channel, drvdata->chs.guaranteed) ?
@ -437,20 +438,20 @@ static ssize_t notrace stm_generic_packet(struct stm_data *stm_data,
switch (packet) {
case STP_PACKET_FLAG:
ch_addr |= stm_channel_off(STM_PKT_TYPE_FLAG, flags);
ch_addr += stm_channel_off(STM_PKT_TYPE_FLAG, flags);
/*
* The generic STM core sets a size of '0' on flag packets.
* As such send a flag packet of size '1' and tell the
* core we did so.
*/
stm_send((void *)ch_addr, payload, 1, drvdata->write_bytes);
stm_send(ch_addr, payload, 1, drvdata->write_bytes);
size = 1;
break;
case STP_PACKET_DATA:
ch_addr |= stm_channel_off(STM_PKT_TYPE_DATA, flags);
stm_send((void *)ch_addr, payload, size,
ch_addr += stm_channel_off(STM_PKT_TYPE_DATA, flags);
stm_send(ch_addr, payload, size,
drvdata->write_bytes);
break;
@ -635,21 +636,21 @@ static ssize_t traceid_store(struct device *dev,
}
static DEVICE_ATTR_RW(traceid);
#define coresight_stm_simple_func(name, offset) \
coresight_simple_func(struct stm_drvdata, NULL, name, offset)
#define coresight_stm_reg(name, offset) \
coresight_simple_reg32(struct stm_drvdata, name, offset)
coresight_stm_simple_func(tcsr, STMTCSR);
coresight_stm_simple_func(tsfreqr, STMTSFREQR);
coresight_stm_simple_func(syncr, STMSYNCR);
coresight_stm_simple_func(sper, STMSPER);
coresight_stm_simple_func(spter, STMSPTER);
coresight_stm_simple_func(privmaskr, STMPRIVMASKR);
coresight_stm_simple_func(spscr, STMSPSCR);
coresight_stm_simple_func(spmscr, STMSPMSCR);
coresight_stm_simple_func(spfeat1r, STMSPFEAT1R);
coresight_stm_simple_func(spfeat2r, STMSPFEAT2R);
coresight_stm_simple_func(spfeat3r, STMSPFEAT3R);
coresight_stm_simple_func(devid, CORESIGHT_DEVID);
coresight_stm_reg(tcsr, STMTCSR);
coresight_stm_reg(tsfreqr, STMTSFREQR);
coresight_stm_reg(syncr, STMSYNCR);
coresight_stm_reg(sper, STMSPER);
coresight_stm_reg(spter, STMSPTER);
coresight_stm_reg(privmaskr, STMPRIVMASKR);
coresight_stm_reg(spscr, STMSPSCR);
coresight_stm_reg(spmscr, STMSPMSCR);
coresight_stm_reg(spfeat1r, STMSPFEAT1R);
coresight_stm_reg(spfeat2r, STMSPFEAT2R);
coresight_stm_reg(spfeat3r, STMSPFEAT3R);
coresight_stm_reg(devid, CORESIGHT_DEVID);
static struct attribute *coresight_stm_attrs[] = {
&dev_attr_hwevent_enable.attr,
@ -914,7 +915,7 @@ static const struct dev_pm_ops stm_dev_pm_ops = {
SET_RUNTIME_PM_OPS(stm_runtime_suspend, stm_runtime_resume, NULL)
};
static struct amba_id stm_ids[] = {
static const struct amba_id stm_ids[] = {
{
.id = 0x0003b962,
.mask = 0x0003ffff,

42
drivers/hwtracing/coresight/coresight-tmc-etf.c
View File

@ -43,17 +43,34 @@ static void tmc_etb_enable_hw(struct tmc_drvdata *drvdata)
static void tmc_etb_dump_hw(struct tmc_drvdata *drvdata)
{
bool lost = false;
char *bufp;
u32 read_data;
const u32 *barrier;
u32 read_data, status;
int i;
/*
* Get a hold of the status register and see if a wrap around
* has occurred.
*/
status = readl_relaxed(drvdata->base + TMC_STS);
if (status & TMC_STS_FULL)
lost = true;
bufp = drvdata->buf;
drvdata->len = 0;
barrier = barrier_pkt;
while (1) {
for (i = 0; i < drvdata->memwidth; i++) {
read_data = readl_relaxed(drvdata->base + TMC_RRD);
if (read_data == 0xFFFFFFFF)
return;
if (lost && *barrier) {
read_data = *barrier;
barrier++;
}
memcpy(bufp, &read_data, 4);
bufp += 4;
drvdata->len += 4;
@ -369,9 +386,11 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
struct perf_output_handle *handle,
void *sink_config)
{
bool lost = false;
int i, cur;
const u32 *barrier;
u32 *buf_ptr;
u32 read_ptr, write_ptr;
u64 read_ptr, write_ptr;
u32 status, to_read;
unsigned long offset;
struct cs_buffers *buf = sink_config;
@ -388,8 +407,8 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
tmc_flush_and_stop(drvdata);
read_ptr = readl_relaxed(drvdata->base + TMC_RRP);
write_ptr = readl_relaxed(drvdata->base + TMC_RWP);
read_ptr = tmc_read_rrp(drvdata);
write_ptr = tmc_read_rwp(drvdata);
/*
* Get a hold of the status register and see if a wrap around
@ -397,7 +416,7 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
*/
status = readl_relaxed(drvdata->base + TMC_STS);
if (status & TMC_STS_FULL) {
perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
lost = true;
to_read = drvdata->size;
} else {
to_read = CIRC_CNT(write_ptr, read_ptr, drvdata->size);
@ -441,18 +460,27 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
if (read_ptr > (drvdata->size - 1))
read_ptr -= drvdata->size;
/* Tell the HW */
writel_relaxed(read_ptr, drvdata->base + TMC_RRP);
perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
tmc_write_rrp(drvdata, read_ptr);
lost = true;
}
if (lost)
perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
cur = buf->cur;
offset = buf->offset;
barrier = barrier_pkt;
/* for every byte to read */
for (i = 0; i < to_read; i += 4) {
buf_ptr = buf->data_pages[cur] + offset;
*buf_ptr = readl_relaxed(drvdata->base + TMC_RRD);
if (lost && *barrier) {
*buf_ptr = *barrier;
barrier++;
}
offset += 4;
if (offset >= PAGE_SIZE) {
offset = 0;

51
drivers/hwtracing/coresight/coresight-tmc-etr.c
View File

@ -22,7 +22,7 @@
static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
{
u32 axictl;
u32 axictl, sts;
/* Zero out the memory to help with debug */
memset(drvdata->vaddr, 0, drvdata->size);
@ -36,17 +36,29 @@ static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
writel_relaxed(TMC_MODE_CIRCULAR_BUFFER, drvdata->base + TMC_MODE);
axictl = readl_relaxed(drvdata->base + TMC_AXICTL);
axictl |= TMC_AXICTL_WR_BURST_16;
writel_relaxed(axictl, drvdata->base + TMC_AXICTL);
axictl &= ~TMC_AXICTL_SCT_GAT_MODE;
writel_relaxed(axictl, drvdata->base + TMC_AXICTL);
axictl = (axictl &
~(TMC_AXICTL_PROT_CTL_B0 | TMC_AXICTL_PROT_CTL_B1)) |
TMC_AXICTL_PROT_CTL_B1;
writel_relaxed(axictl, drvdata->base + TMC_AXICTL);
axictl &= ~TMC_AXICTL_CLEAR_MASK;
axictl |= (TMC_AXICTL_PROT_CTL_B1 | TMC_AXICTL_WR_BURST_16);
axictl |= TMC_AXICTL_AXCACHE_OS;
if (tmc_etr_has_cap(drvdata, TMC_ETR_AXI_ARCACHE)) {
axictl &= ~TMC_AXICTL_ARCACHE_MASK;
axictl |= TMC_AXICTL_ARCACHE_OS;
}
writel_relaxed(axictl, drvdata->base + TMC_AXICTL);
tmc_write_dba(drvdata, drvdata->paddr);
/*
* If the TMC pointers must be programmed before the session,
* we have to set it properly (i.e, RRP/RWP to base address and
* STS to "not full").
*/
if (tmc_etr_has_cap(drvdata, TMC_ETR_SAVE_RESTORE)) {
tmc_write_rrp(drvdata, drvdata->paddr);
tmc_write_rwp(drvdata, drvdata->paddr);
sts = readl_relaxed(drvdata->base + TMC_STS) & ~TMC_STS_FULL;
writel_relaxed(sts, drvdata->base + TMC_STS);
}
writel_relaxed(drvdata->paddr, drvdata->base + TMC_DBALO);
writel_relaxed(0x0, drvdata->base + TMC_DBAHI);
writel_relaxed(TMC_FFCR_EN_FMT | TMC_FFCR_EN_TI |
TMC_FFCR_FON_FLIN | TMC_FFCR_FON_TRIG_EVT |
TMC_FFCR_TRIGON_TRIGIN,
@ -59,9 +71,12 @@ static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
static void tmc_etr_dump_hw(struct tmc_drvdata *drvdata)
{
u32 rwp, val;
const u32 *barrier;
u32 val;
u32 *temp;
u64 rwp;
rwp = readl_relaxed(drvdata->base + TMC_RWP);
rwp = tmc_read_rwp(drvdata);
val = readl_relaxed(drvdata->base + TMC_STS);
/*
@ -71,6 +86,16 @@ static void tmc_etr_dump_hw(struct tmc_drvdata *drvdata)
if (val & TMC_STS_FULL) {
drvdata->buf = drvdata->vaddr + rwp - drvdata->paddr;
drvdata->len = drvdata->size;
barrier = barrier_pkt;
temp = (u32 *)drvdata->buf;
while (*barrier) {
*temp = *barrier;
temp++;
barrier++;
}
} else {
drvdata->buf = drvdata->vaddr;
drvdata->len = rwp - drvdata->paddr;

106
drivers/hwtracing/coresight/coresight-tmc.c
View File

@ -217,20 +217,24 @@ static enum tmc_mem_intf_width tmc_get_memwidth(u32 devid)
return memwidth;
}
#define coresight_tmc_simple_func(name, offset) \
coresight_simple_func(struct tmc_drvdata, NULL, name, offset)
#define coresight_tmc_reg(name, offset) \
coresight_simple_reg32(struct tmc_drvdata, name, offset)
#define coresight_tmc_reg64(name, lo_off, hi_off) \
coresight_simple_reg64(struct tmc_drvdata, name, lo_off, hi_off)
coresight_tmc_simple_func(rsz, TMC_RSZ);
coresight_tmc_simple_func(sts, TMC_STS);
coresight_tmc_simple_func(rrp, TMC_RRP);
coresight_tmc_simple_func(rwp, TMC_RWP);
coresight_tmc_simple_func(trg, TMC_TRG);
coresight_tmc_simple_func(ctl, TMC_CTL);
coresight_tmc_simple_func(ffsr, TMC_FFSR);
coresight_tmc_simple_func(ffcr, TMC_FFCR);
coresight_tmc_simple_func(mode, TMC_MODE);
coresight_tmc_simple_func(pscr, TMC_PSCR);
coresight_tmc_simple_func(devid, CORESIGHT_DEVID);
coresight_tmc_reg(rsz, TMC_RSZ);
coresight_tmc_reg(sts, TMC_STS);
coresight_tmc_reg(trg, TMC_TRG);
coresight_tmc_reg(ctl, TMC_CTL);
coresight_tmc_reg(ffsr, TMC_FFSR);
coresight_tmc_reg(ffcr, TMC_FFCR);
coresight_tmc_reg(mode, TMC_MODE);
coresight_tmc_reg(pscr, TMC_PSCR);
coresight_tmc_reg(axictl, TMC_AXICTL);
coresight_tmc_reg(devid, CORESIGHT_DEVID);
coresight_tmc_reg64(rrp, TMC_RRP, TMC_RRPHI);
coresight_tmc_reg64(rwp, TMC_RWP, TMC_RWPHI);
coresight_tmc_reg64(dba, TMC_DBALO, TMC_DBAHI);
static struct attribute *coresight_tmc_mgmt_attrs[] = {
&dev_attr_rsz.attr,
@ -244,6 +248,8 @@ static struct attribute *coresight_tmc_mgmt_attrs[] = {
&dev_attr_mode.attr,
&dev_attr_pscr.attr,
&dev_attr_devid.attr,
&dev_attr_dba.attr,
&dev_attr_axictl.attr,
NULL,
};
@ -293,6 +299,42 @@ const struct attribute_group *coresight_tmc_groups[] = {
NULL,
};
/* Detect and initialise the capabilities of a TMC ETR */
static int tmc_etr_setup_caps(struct tmc_drvdata *drvdata,
u32 devid, void *dev_caps)
{
u32 dma_mask = 0;
/* Set the unadvertised capabilities */
tmc_etr_init_caps(drvdata, (u32)(unsigned long)dev_caps);
if (!(devid & TMC_DEVID_NOSCAT))
tmc_etr_set_cap(drvdata, TMC_ETR_SG);
/* Check if the AXI address width is available */
if (devid & TMC_DEVID_AXIAW_VALID)
dma_mask = ((devid >> TMC_DEVID_AXIAW_SHIFT) &
TMC_DEVID_AXIAW_MASK);
/*
* Unless specified in the device configuration, ETR uses a 40-bit
* AXI master in place of the embedded SRAM of ETB/ETF.
*/
switch (dma_mask) {
case 32:
case 40:
case 44:
case 48:
case 52:
dev_info(drvdata->dev, "Detected dma mask %dbits\n", dma_mask);
break;
default:
dma_mask = 40;
}
return dma_set_mask_and_coherent(drvdata->dev, DMA_BIT_MASK(dma_mask));
}
static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
@ -354,25 +396,29 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
desc.dev = dev;
desc.groups = coresight_tmc_groups;
if (drvdata->config_type == TMC_CONFIG_TYPE_ETB) {
switch (drvdata->config_type) {
case TMC_CONFIG_TYPE_ETB:
desc.type = CORESIGHT_DEV_TYPE_SINK;
desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
desc.ops = &tmc_etb_cs_ops;
} else if (drvdata->config_type == TMC_CONFIG_TYPE_ETR) {
break;
case TMC_CONFIG_TYPE_ETR:
desc.type = CORESIGHT_DEV_TYPE_SINK;
desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
desc.ops = &tmc_etr_cs_ops;
/*
* ETR configuration uses a 40-bit AXI master in place of
* the embedded SRAM of ETB/ETF.
*/
ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
ret = tmc_etr_setup_caps(drvdata, devid, id->data);
if (ret)
goto out;
} else {
break;
case TMC_CONFIG_TYPE_ETF:
desc.type = CORESIGHT_DEV_TYPE_LINKSINK;
desc.subtype.link_subtype = CORESIGHT_DEV_SUBTYPE_LINK_FIFO;
desc.ops = &tmc_etf_cs_ops;
break;
default:
pr_err("%s: Unsupported TMC config\n", pdata->name);
ret = -EINVAL;
goto out;
}
drvdata->csdev = coresight_register(&desc);
@ -391,11 +437,27 @@ out:
return ret;
}
static struct amba_id tmc_ids[] = {
static const struct amba_id tmc_ids[] = {
{
.id = 0x0003b961,
.mask = 0x0003ffff,
},
{
/* Coresight SoC 600 TMC-ETR/ETS */
.id = 0x000bb9e8,
.mask = 0x000fffff,
.data = (void *)(unsigned long)CORESIGHT_SOC_600_ETR_CAPS,
},
{
/* Coresight SoC 600 TMC-ETB */
.id = 0x000bb9e9,
.mask = 0x000fffff,
},
{
/* Coresight SoC 600 TMC-ETF */
.id = 0x000bb9ea,
.mask = 0x000fffff,
},
{ 0, 0},
};

85
drivers/hwtracing/coresight/coresight-tmc.h
View File

@ -54,11 +54,32 @@
#define TMC_STS_TMCREADY_BIT 2
#define TMC_STS_FULL BIT(0)
#define TMC_STS_TRIGGERED BIT(1)
/* TMC_AXICTL - 0x110 */
/*
* TMC_AXICTL - 0x110
*
* TMC AXICTL format for SoC-400
* Bits [0-1] : ProtCtrlBit0-1
* Bits [2-5] : CacheCtrlBits 0-3 (AXCACHE)
* Bit 6 : Reserved
* Bit 7 : ScatterGatherMode
* Bits [8-11] : WrBurstLen
* Bits [12-31] : Reserved.
* TMC AXICTL format for SoC-600, as above except:
* Bits [2-5] : AXI WCACHE
* Bits [16-19] : AXI RCACHE
* Bits [20-31] : Reserved
*/
#define TMC_AXICTL_CLEAR_MASK 0xfbf
#define TMC_AXICTL_ARCACHE_MASK (0xf << 16)
#define TMC_AXICTL_PROT_CTL_B0 BIT(0)
#define TMC_AXICTL_PROT_CTL_B1 BIT(1)
#define TMC_AXICTL_SCT_GAT_MODE BIT(7)
#define TMC_AXICTL_WR_BURST_16 0xF00
/* Write-back Read and Write-allocate */
#define TMC_AXICTL_AXCACHE_OS (0xf << 2)
#define TMC_AXICTL_ARCACHE_OS (0xf << 16)
/* TMC_FFCR - 0x304 */
#define TMC_FFCR_FLUSHMAN_BIT 6
#define TMC_FFCR_EN_FMT BIT(0)
@ -69,6 +90,12 @@
#define TMC_FFCR_STOP_ON_FLUSH BIT(12)
#define TMC_DEVID_NOSCAT BIT(24)
#define TMC_DEVID_AXIAW_VALID BIT(16)
#define TMC_DEVID_AXIAW_SHIFT 17
#define TMC_DEVID_AXIAW_MASK 0x7f
enum tmc_config_type {
TMC_CONFIG_TYPE_ETB,
TMC_CONFIG_TYPE_ETR,
@ -88,6 +115,24 @@ enum tmc_mem_intf_width {
TMC_MEM_INTF_WIDTH_256BITS = 8,
};
/* TMC ETR Capability bit definitions */
#define TMC_ETR_SG (0x1U << 0)
/* ETR has separate read/write cache encodings */
#define TMC_ETR_AXI_ARCACHE (0x1U << 1)
/*
* TMC_ETR_SAVE_RESTORE - Values of RRP/RWP/STS.Full are
* retained when TMC leaves Disabled state, allowing us to continue
* the tracing from a point where we stopped. This also implies that
* the RRP/RWP/STS.Full should always be programmed to the correct
* value. Unfortunately this is not advertised by the hardware,
* so we have to rely on PID of the IP to detect the functionality.
*/
#define TMC_ETR_SAVE_RESTORE (0x1U << 2)
/* Coresight SoC-600 TMC-ETR unadvertised capabilities */
#define CORESIGHT_SOC_600_ETR_CAPS \
(TMC_ETR_SAVE_RESTORE | TMC_ETR_AXI_ARCACHE)
/**
* struct tmc_drvdata - specifics associated to an TMC component
* @base: memory mapped base address for this component.
@ -104,6 +149,8 @@ enum tmc_mem_intf_width {
* @config_type: TMC variant, must be of type @tmc_config_type.
* @memwidth: width of the memory interface databus, in bytes.
* @trigger_cntr: amount of words to store after a trigger.
* @etr_caps: Bitmask of capabilities of the TMC ETR, inferred from the
* device configuration register (DEVID)
*/
struct tmc_drvdata {
void __iomem *base;
@ -121,6 +168,7 @@ struct tmc_drvdata {
enum tmc_config_type config_type;
enum tmc_mem_intf_width memwidth;
u32 trigger_cntr;
u32 etr_caps;
};
/* Generic functions */
@ -139,4 +187,39 @@ extern const struct coresight_ops tmc_etf_cs_ops;
int tmc_read_prepare_etr(struct tmc_drvdata *drvdata);
int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata);
extern const struct coresight_ops tmc_etr_cs_ops;
#define TMC_REG_PAIR(name, lo_off, hi_off) \
static inline u64 \
tmc_read_##name(struct tmc_drvdata *drvdata) \
{ \
return coresight_read_reg_pair(drvdata->base, lo_off, hi_off); \
} \
static inline void \
tmc_write_##name(struct tmc_drvdata *drvdata, u64 val) \
{ \
coresight_write_reg_pair(drvdata->base, val, lo_off, hi_off); \
}
TMC_REG_PAIR(rrp, TMC_RRP, TMC_RRPHI)
TMC_REG_PAIR(rwp, TMC_RWP, TMC_RWPHI)
TMC_REG_PAIR(dba, TMC_DBALO, TMC_DBAHI)
/* Initialise the caps from unadvertised static capabilities of the device */
static inline void tmc_etr_init_caps(struct tmc_drvdata *drvdata, u32 dev_caps)
{
WARN_ON(drvdata->etr_caps);
drvdata->etr_caps = dev_caps;
}
static inline void tmc_etr_set_cap(struct tmc_drvdata *drvdata, u32 cap)
{
drvdata->etr_caps |= cap;
}
static inline bool tmc_etr_has_cap(struct tmc_drvdata *drvdata, u32 cap)
{
return !!(drvdata->etr_caps & cap);
}
#endif

7
drivers/hwtracing/coresight/coresight-tpiu.c
View File

@ -192,7 +192,7 @@ static const struct dev_pm_ops tpiu_dev_pm_ops = {
SET_RUNTIME_PM_OPS(tpiu_runtime_suspend, tpiu_runtime_resume, NULL)
};
static struct amba_id tpiu_ids[] = {
static const struct amba_id tpiu_ids[] = {
{
.id = 0x0003b912,
.mask = 0x0003ffff,
@ -201,6 +201,11 @@ static struct amba_id tpiu_ids[] = {
.id = 0x0004b912,
.mask = 0x0007ffff,
},
{
/* Coresight SoC-600 */
.id = 0x000bb9e7,
.mask = 0x000fffff,
},
{ 0, 0},
};

8
drivers/hwtracing/coresight/coresight.c
View File

@ -53,6 +53,14 @@ static DEFINE_PER_CPU(struct list_head *, tracer_path);
*/
static struct list_head *stm_path;
/*
* When losing synchronisation a new barrier packet needs to be inserted at the
* beginning of the data collected in a buffer. That way the decoder knows that
* it needs to look for another sync sequence.
*/
const u32 barrier_pkt[5] = {0x7fffffff, 0x7fffffff,
0x7fffffff, 0x7fffffff, 0x0};
static int coresight_id_match(struct device *dev, void *data)
{
int trace_id, i_trace_id;

371
drivers/hwtracing/intel_th/core.c
View File

@ -101,17 +101,53 @@ out_pm:
return ret;
}
static void intel_th_device_remove(struct intel_th_device *thdev);
static int intel_th_remove(struct device *dev)
{
struct intel_th_driver *thdrv = to_intel_th_driver(dev->driver);
struct intel_th_device *thdev = to_intel_th_device(dev);
struct intel_th_device *hub = to_intel_th_device(dev->parent);
struct intel_th_device *hub = to_intel_th_hub(thdev);
int err;
if (thdev->type == INTEL_TH_SWITCH) {
struct intel_th *th = to_intel_th(hub);
int i, lowest;
/* disconnect outputs */
err = device_for_each_child(dev, thdev, intel_th_child_remove);
if (err)
return err;
/*
* Remove outputs, that is, hub's children: they are created
* at hub's probe time by having the hub call
* intel_th_output_enable() for each of them.
*/
for (i = 0, lowest = -1; i < th->num_thdevs; i++) {
/*
* Move the non-output devices from higher up the
* th->thdev[] array to lower positions to maintain
* a contiguous array.
*/
if (th->thdev[i]->type != INTEL_TH_OUTPUT) {
if (lowest >= 0) {
th->thdev[lowest] = th->thdev[i];
th->thdev[i] = NULL;
++lowest;
}
continue;
}
if (lowest == -1)
lowest = i;
intel_th_device_remove(th->thdev[i]);
th->thdev[i] = NULL;
}
th->num_thdevs = lowest;
}
if (thdrv->attr_group)
@ -156,21 +192,6 @@ static struct device_type intel_th_source_device_type = {
.release = intel_th_device_release,
};
static struct intel_th *to_intel_th(struct intel_th_device *thdev)
{
/*
* subdevice tree is flat: if this one is not a switch, its
* parent must be
*/
if (thdev->type != INTEL_TH_SWITCH)
thdev = to_intel_th_hub(thdev);
if (WARN_ON_ONCE(!thdev || thdev->type != INTEL_TH_SWITCH))
return NULL;
return dev_get_drvdata(thdev->dev.parent);
}
static char *intel_th_output_devnode(struct device *dev, umode_t *mode,
kuid_t *uid, kgid_t *gid)
{
@ -205,6 +226,7 @@ static int intel_th_output_activate(struct intel_th_device *thdev)
{
struct intel_th_driver *thdrv =
to_intel_th_driver_or_null(thdev->dev.driver);
struct intel_th *th = to_intel_th(thdev);
int ret = 0;
if (!thdrv)
@ -215,15 +237,28 @@ static int intel_th_output_activate(struct intel_th_device *thdev)
pm_runtime_get_sync(&thdev->dev);
if (th->activate)
ret = th->activate(th);
if (ret)
goto fail_put;
if (thdrv->activate)
ret = thdrv->activate(thdev);
else
intel_th_trace_enable(thdev);
if (ret) {
pm_runtime_put(&thdev->dev);
module_put(thdrv->driver.owner);
}
if (ret)
goto fail_deactivate;
return 0;
fail_deactivate:
if (th->deactivate)
th->deactivate(th);
fail_put:
pm_runtime_put(&thdev->dev);
module_put(thdrv->driver.owner);
return ret;
}
@ -232,6 +267,7 @@ static void intel_th_output_deactivate(struct intel_th_device *thdev)
{
struct intel_th_driver *thdrv =
to_intel_th_driver_or_null(thdev->dev.driver);
struct intel_th *th = to_intel_th(thdev);
if (!thdrv)
return;
@ -241,6 +277,9 @@ static void intel_th_output_deactivate(struct intel_th_device *thdev)
else
intel_th_trace_disable(thdev);
if (th->deactivate)
th->deactivate(th);
pm_runtime_put(&thdev->dev);
module_put(thdrv->driver.owner);
}
@ -326,10 +365,10 @@ intel_th_device_alloc(struct intel_th *th, unsigned int type, const char *name,
struct device *parent;
struct intel_th_device *thdev;
if (type == INTEL_TH_SWITCH)
parent = th->dev;
else
if (type == INTEL_TH_OUTPUT)
parent = &th->hub->dev;
else
parent = th->dev;
thdev = kzalloc(sizeof(*thdev) + strlen(name) + 1, GFP_KERNEL);
if (!thdev)
@ -392,13 +431,14 @@ static const struct intel_th_subdevice {
unsigned otype;
unsigned scrpd;
int id;
} intel_th_subdevices[TH_SUBDEVICE_MAX] = {
} intel_th_subdevices[] = {
{
.nres = 1,
.res = {
{
/* Handle TSCU from GTH driver */
.start = REG_GTH_OFFSET,
.end = REG_GTH_OFFSET + REG_GTH_LENGTH - 1,
.end = REG_TSCU_OFFSET + REG_TSCU_LENGTH - 1,
.flags = IORESOURCE_MEM,
},
},
@ -479,6 +519,21 @@ static const struct intel_th_subdevice {
.otype = GTH_PTI,
.scrpd = SCRPD_PTI_IS_PRIM_DEST,
},
{
.nres = 1,
.res = {
{
.start = REG_PTI_OFFSET,
.end = REG_PTI_OFFSET + REG_PTI_LENGTH - 1,
.flags = IORESOURCE_MEM,
},
},
.id = -1,
.name = "lpp",
.type = INTEL_TH_OUTPUT,
.otype = GTH_LPP,
.scrpd = SCRPD_PTI_IS_PRIM_DEST,
},
{
.nres = 1,
.res = {
@ -526,98 +581,182 @@ static inline void intel_th_request_hub_module_flush(struct intel_th *th)
}
#endif /* CONFIG_MODULES */
static int intel_th_populate(struct intel_th *th, struct resource *devres,
unsigned int ndevres, int irq)
static struct intel_th_device *
intel_th_subdevice_alloc(struct intel_th *th,
const struct intel_th_subdevice *subdev)
{
struct intel_th_device *thdev;
struct resource res[3];
unsigned int req = 0;
int src, dst, err;
int r, err;
thdev = intel_th_device_alloc(th, subdev->type, subdev->name,
subdev->id);
if (!thdev)
return ERR_PTR(-ENOMEM);
thdev->drvdata = th->drvdata;
memcpy(res, subdev->res,
sizeof(struct resource) * subdev->nres);
for (r = 0; r < subdev->nres; r++) {
struct resource *devres = th->resource;
int bar = TH_MMIO_CONFIG;
/*
* Take .end == 0 to mean 'take the whole bar',
* .start then tells us which bar it is. Default to
* TH_MMIO_CONFIG.
*/
if (!res[r].end && res[r].flags == IORESOURCE_MEM) {
bar = res[r].start;
res[r].start = 0;
res[r].end = resource_size(&devres[bar]) - 1;
}
if (res[r].flags & IORESOURCE_MEM) {
res[r].start += devres[bar].start;
res[r].end += devres[bar].start;
dev_dbg(th->dev, "%s:%d @ %pR\n",
subdev->name, r, &res[r]);
} else if (res[r].flags & IORESOURCE_IRQ) {
res[r].start = th->irq;
}
}
err = intel_th_device_add_resources(thdev, res, subdev->nres);
if (err) {
put_device(&thdev->dev);
goto fail_put_device;
}
if (subdev->type == INTEL_TH_OUTPUT) {
thdev->dev.devt = MKDEV(th->major, th->num_thdevs);
thdev->output.type = subdev->otype;
thdev->output.port = -1;
thdev->output.scratchpad = subdev->scrpd;
} else if (subdev->type == INTEL_TH_SWITCH) {
thdev->host_mode = host_mode;
th->hub = thdev;
}
err = device_add(&thdev->dev);
if (err) {
put_device(&thdev->dev);
goto fail_free_res;
}
/* need switch driver to be loaded to enumerate the rest */
if (subdev->type == INTEL_TH_SWITCH && !req) {
err = intel_th_request_hub_module(th);
if (!err)
req++;
}
return thdev;
fail_free_res:
kfree(thdev->resource);
fail_put_device:
put_device(&thdev->dev);
return ERR_PTR(err);
}
/**
* intel_th_output_enable() - find and enable a device for a given output type
* @th: Intel TH instance
* @otype: output type
*
* Go through the unallocated output devices, find the first one whos type
* matches @otype and instantiate it. These devices are removed when the hub
* device is removed, see intel_th_remove().
*/
int intel_th_output_enable(struct intel_th *th, unsigned int otype)
{
struct intel_th_device *thdev;
int src = 0, dst = 0;
for (src = 0, dst = 0; dst <= th->num_thdevs; src++, dst++) {
for (; src < ARRAY_SIZE(intel_th_subdevices); src++) {
if (intel_th_subdevices[src].type != INTEL_TH_OUTPUT)
continue;
if (intel_th_subdevices[src].otype != otype)
continue;
break;
}
/* no unallocated matching subdevices */
if (src == ARRAY_SIZE(intel_th_subdevices))
return -ENODEV;
for (; dst < th->num_thdevs; dst++) {
if (th->thdev[dst]->type != INTEL_TH_OUTPUT)
continue;
if (th->thdev[dst]->output.type != otype)
continue;
break;
}
/*
* intel_th_subdevices[src] matches our requirements and is
* not matched in th::thdev[]
*/
if (dst == th->num_thdevs)
goto found;
}
return -ENODEV;
found:
thdev = intel_th_subdevice_alloc(th, &intel_th_subdevices[src]);
if (IS_ERR(thdev))
return PTR_ERR(thdev);
th->thdev[th->num_thdevs++] = thdev;
return 0;
}
EXPORT_SYMBOL_GPL(intel_th_output_enable);
static int intel_th_populate(struct intel_th *th)
{
int src;
/* create devices for each intel_th_subdevice */
for (src = 0, dst = 0; src < ARRAY_SIZE(intel_th_subdevices); src++) {
for (src = 0; src < ARRAY_SIZE(intel_th_subdevices); src++) {
const struct intel_th_subdevice *subdev =
&intel_th_subdevices[src];
struct intel_th_device *thdev;
int r;
/* only allow SOURCE and SWITCH devices in host mode */
if (host_mode && subdev->type == INTEL_TH_OUTPUT)
continue;
thdev = intel_th_device_alloc(th, subdev->type, subdev->name,
subdev->id);
if (!thdev) {
err = -ENOMEM;
goto kill_subdevs;
}
/*
* don't enable port OUTPUTs in this path; SWITCH enables them
* via intel_th_output_enable()
*/
if (subdev->type == INTEL_TH_OUTPUT &&
subdev->otype != GTH_NONE)
continue;
memcpy(res, subdev->res,
sizeof(struct resource) * subdev->nres);
thdev = intel_th_subdevice_alloc(th, subdev);
/* note: caller should free subdevices from th::thdev[] */
if (IS_ERR(thdev))
return PTR_ERR(thdev);
for (r = 0; r < subdev->nres; r++) {
int bar = TH_MMIO_CONFIG;
/*
* Take .end == 0 to mean 'take the whole bar',
* .start then tells us which bar it is. Default to
* TH_MMIO_CONFIG.
*/
if (!res[r].end && res[r].flags == IORESOURCE_MEM) {
bar = res[r].start;
res[r].start = 0;
res[r].end = resource_size(&devres[bar]) - 1;
}
if (res[r].flags & IORESOURCE_MEM) {
res[r].start += devres[bar].start;
res[r].end += devres[bar].start;
dev_dbg(th->dev, "%s:%d @ %pR\n",
subdev->name, r, &res[r]);
} else if (res[r].flags & IORESOURCE_IRQ) {
res[r].start = irq;
}
}
err = intel_th_device_add_resources(thdev, res, subdev->nres);
if (err) {
put_device(&thdev->dev);
goto kill_subdevs;
}
if (subdev->type == INTEL_TH_OUTPUT) {
thdev->dev.devt = MKDEV(th->major, dst);
thdev->output.type = subdev->otype;
thdev->output.port = -1;
thdev->output.scratchpad = subdev->scrpd;
} else if (subdev->type == INTEL_TH_SWITCH) {
thdev->host_mode = host_mode;
}
err = device_add(&thdev->dev);
if (err) {
put_device(&thdev->dev);
goto kill_subdevs;
}
/* need switch driver to be loaded to enumerate the rest */
if (subdev->type == INTEL_TH_SWITCH && !req) {
th->hub = thdev;
err = intel_th_request_hub_module(th);
if (!err)
req++;
}
th->thdev[dst++] = thdev;
th->thdev[th->num_thdevs++] = thdev;
}
return 0;
kill_subdevs:
for (; dst >= 0; dst--)
intel_th_device_remove(th->thdev[dst]);
return err;
}
static int match_devt(struct device *dev, void *data)
@ -670,8 +809,8 @@ static const struct file_operations intel_th_output_fops = {
* @irq: irq number
*/
struct intel_th *
intel_th_alloc(struct device *dev, struct resource *devres,
unsigned int ndevres, int irq)
intel_th_alloc(struct device *dev, struct intel_th_drvdata *drvdata,
struct resource *devres, unsigned int ndevres, int irq)
{
struct intel_th *th;
int err;
@ -693,6 +832,11 @@ intel_th_alloc(struct device *dev, struct resource *devres,
goto err_ida;
}
th->dev = dev;
th->drvdata = drvdata;
th->resource = devres;
th->num_resources = ndevres;
th->irq = irq;
dev_set_drvdata(dev, th);
@ -700,18 +844,15 @@ intel_th_alloc(struct device *dev, struct resource *devres,
pm_runtime_put(dev);
pm_runtime_allow(dev);
err = intel_th_populate(th, devres, ndevres, irq);
if (err)
goto err_chrdev;
err = intel_th_populate(th);
if (err) {
/* free the subdevices and undo everything */
intel_th_free(th);
return ERR_PTR(err);
}
return th;
err_chrdev:
pm_runtime_forbid(dev);
__unregister_chrdev(th->major, 0, TH_POSSIBLE_OUTPUTS,
"intel_th/output");
err_ida:
ida_simple_remove(&intel_th_ida, th->id);
@ -727,11 +868,15 @@ void intel_th_free(struct intel_th *th)
int i;
intel_th_request_hub_module_flush(th);
for (i = 0; i < TH_SUBDEVICE_MAX; i++)
if (th->thdev[i] && th->thdev[i] != th->hub)
intel_th_device_remove(th->thdev[i]);
intel_th_device_remove(th->hub);
for (i = 0; i < th->num_thdevs; i++) {
if (th->thdev[i] != th->hub)
intel_th_device_remove(th->thdev[i]);
th->thdev[i] = NULL;
}
th->num_thdevs = 0;
pm_runtime_get_sync(th->dev);
pm_runtime_forbid(th->dev);

40
drivers/hwtracing/intel_th/gth.c
View File

@ -285,16 +285,16 @@ gth_output_parm_get(struct gth_device *gth, int port, unsigned int parm)
*/
static int intel_th_gth_reset(struct gth_device *gth)
{
u32 scratchpad;
u32 reg;
int port, i;
scratchpad = ioread32(gth->base + REG_GTH_SCRPD0);
if (scratchpad & SCRPD_DEBUGGER_IN_USE)
reg = ioread32(gth->base + REG_GTH_SCRPD0);
if (reg & SCRPD_DEBUGGER_IN_USE)
return -EBUSY;
/* Always save/restore STH and TU registers in S0ix entry/exit */
scratchpad |= SCRPD_STH_IS_ENABLED | SCRPD_TRIGGER_IS_ENABLED;
iowrite32(scratchpad, gth->base + REG_GTH_SCRPD0);
reg |= SCRPD_STH_IS_ENABLED | SCRPD_TRIGGER_IS_ENABLED;
iowrite32(reg, gth->base + REG_GTH_SCRPD0);
/* output ports */
for (port = 0; port < 8; port++) {
@ -512,6 +512,15 @@ static void intel_th_gth_disable(struct intel_th_device *thdev,
iowrite32(reg, gth->base + REG_GTH_SCRPD0);
}
static void gth_tscu_resync(struct gth_device *gth)
{
u32 reg;
reg = ioread32(gth->base + REG_TSCU_TSUCTRL);
reg &= ~TSUCTRL_CTCRESYNC;
iowrite32(reg, gth->base + REG_TSCU_TSUCTRL);
}
/**
* intel_th_gth_enable() - enable tracing to an output device
* @thdev: GTH device
@ -524,6 +533,7 @@ static void intel_th_gth_enable(struct intel_th_device *thdev,
struct intel_th_output *output)
{
struct gth_device *gth = dev_get_drvdata(&thdev->dev);
struct intel_th *th = to_intel_th(thdev);
u32 scr = 0xfc0000, scrpd;
int master;
@ -539,6 +549,9 @@ static void intel_th_gth_enable(struct intel_th_device *thdev,
output->active = true;
spin_unlock(&gth->gth_lock);
if (INTEL_TH_CAP(th, tscu_enable))
gth_tscu_resync(gth);
scrpd = ioread32(gth->base + REG_GTH_SCRPD0);
scrpd |= output->scratchpad;
iowrite32(scrpd, gth->base + REG_GTH_SCRPD0);
@ -639,6 +652,7 @@ intel_th_gth_set_output(struct intel_th_device *thdev, unsigned int master)
static int intel_th_gth_probe(struct intel_th_device *thdev)
{
struct device *dev = &thdev->dev;
struct intel_th *th = dev_get_drvdata(dev->parent);
struct gth_device *gth;
struct resource *res;
void __iomem *base;
@ -660,6 +674,8 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
gth->base = base;
spin_lock_init(&gth->gth_lock);
dev_set_drvdata(dev, gth);
/*
* Host mode can be signalled via SW means or via SCRPD_DEBUGGER_IN_USE
* bit. Either way, don't reset HW in this case, and don't export any
@ -667,7 +683,7 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
* drivers to ports, see intel_th_gth_assign().
*/
if (thdev->host_mode)
goto done;
return 0;
ret = intel_th_gth_reset(gth);
if (ret) {
@ -676,7 +692,7 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
thdev->host_mode = true;
goto done;
return 0;
}
for (i = 0; i < TH_CONFIGURABLE_MASTERS + 1; i++)
@ -687,6 +703,13 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
gth->output[i].index = i;
gth->output[i].port_type =
gth_output_parm_get(gth, i, TH_OUTPUT_PARM(port));
if (gth->output[i].port_type == GTH_NONE)
continue;
ret = intel_th_output_enable(th, gth->output[i].port_type);
/* -ENODEV is ok, we just won't have that device enumerated */
if (ret && ret != -ENODEV)
return ret;
}
if (intel_th_output_attributes(gth) ||
@ -698,9 +721,6 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
return -ENOMEM;
}
done:
dev_set_drvdata(dev, gth);
return 0;
}

5
drivers/hwtracing/intel_th/gth.h
View File

@ -55,9 +55,14 @@ enum {
REG_GTH_SCRPD1 = 0xe4, /* ScratchPad[1] */
REG_GTH_SCRPD2 = 0xe8, /* ScratchPad[2] */
REG_GTH_SCRPD3 = 0xec, /* ScratchPad[3] */
REG_TSCU_TSUCTRL = 0x2000, /* TSCU control register */
REG_TSCU_TSCUSTAT = 0x2004, /* TSCU status register */
};
/* waiting for Pipeline Empty bit(s) to assert for GTH */
#define GTH_PLE_WAITLOOP_DEPTH 10000
#define TSUCTRL_CTCRESYNC BIT(0)
#define TSCUSTAT_CTCSYNCING BIT(1)
#endif /* __INTEL_TH_GTH_H__ */

104
drivers/hwtracing/intel_th/intel_th.h
View File

@ -47,9 +47,20 @@ struct intel_th_output {
bool active;
};
/**
* struct intel_th_drvdata - describes hardware capabilities and quirks
* @tscu_enable: device needs SW to enable time stamping unit
*/
struct intel_th_drvdata {
unsigned int tscu_enable : 1;
};
#define INTEL_TH_CAP(_th, _cap) ((_th)->drvdata ? (_th)->drvdata->_cap : 0)
/**
* struct intel_th_device - device on the intel_th bus
* @dev: device
* @drvdata: hardware capabilities/quirks
* @resource: array of resources available to this device
* @num_resources: number of resources in @resource array
* @type: INTEL_TH_{SOURCE,OUTPUT,SWITCH}
@ -59,11 +70,12 @@ struct intel_th_output {
* @name: device name to match the driver
*/
struct intel_th_device {
struct device dev;
struct resource *resource;
unsigned int num_resources;
unsigned int type;
int id;
struct device dev;
struct intel_th_drvdata *drvdata;
struct resource *resource;
unsigned int num_resources;
unsigned int type;
int id;
/* INTEL_TH_SWITCH specific */
bool host_mode;
@ -96,6 +108,17 @@ intel_th_device_get_resource(struct intel_th_device *thdev, unsigned int type,
return NULL;
}
/*
* GTH, output ports configuration
*/
enum {
GTH_NONE = 0,
GTH_MSU, /* memory/usb */
GTH_CTP, /* Common Trace Port */
GTH_LPP, /* Low Power Path */
GTH_PTI, /* MIPI-PTI */
};
/**
* intel_th_output_assigned() - if an output device is assigned to a switch port
* @thdev: the output device
@ -106,7 +129,8 @@ static inline bool
intel_th_output_assigned(struct intel_th_device *thdev)
{
return thdev->type == INTEL_TH_OUTPUT &&
thdev->output.port >= 0;
(thdev->output.port >= 0 ||
thdev->output.type == GTH_NONE);
}
/**
@ -161,8 +185,18 @@ struct intel_th_driver {
#define to_intel_th_driver_or_null(_d) \
((_d) ? to_intel_th_driver(_d) : NULL)
/*
* Subdevice tree structure is as follows:
* + struct intel_th device (pci; dev_{get,set}_drvdata()
* + struct intel_th_device INTEL_TH_SWITCH (GTH)
* + struct intel_th_device INTEL_TH_OUTPUT (MSU, PTI)
* + struct intel_th_device INTEL_TH_SOURCE (STH)
*
* In other words, INTEL_TH_OUTPUT devices are children of INTEL_TH_SWITCH;
* INTEL_TH_SWITCH and INTEL_TH_SOURCE are children of the intel_th device.
*/
static inline struct intel_th_device *
to_intel_th_hub(struct intel_th_device *thdev)
to_intel_th_parent(struct intel_th_device *thdev)
{
struct device *parent = thdev->dev.parent;
@ -172,9 +206,20 @@ to_intel_th_hub(struct intel_th_device *thdev)
return to_intel_th_device(parent);
}
static inline struct intel_th *to_intel_th(struct intel_th_device *thdev)
{
if (thdev->type == INTEL_TH_OUTPUT)
thdev = to_intel_th_parent(thdev);
if (WARN_ON_ONCE(!thdev || thdev->type == INTEL_TH_OUTPUT))
return NULL;
return dev_get_drvdata(thdev->dev.parent);
}
struct intel_th *
intel_th_alloc(struct device *dev, struct resource *devres,
unsigned int ndevres, int irq);
intel_th_alloc(struct device *dev, struct intel_th_drvdata *drvdata,
struct resource *devres, unsigned int ndevres, int irq);
void intel_th_free(struct intel_th *th);
int intel_th_driver_register(struct intel_th_driver *thdrv);
@ -184,6 +229,7 @@ int intel_th_trace_enable(struct intel_th_device *thdev);
int intel_th_trace_disable(struct intel_th_device *thdev);
int intel_th_set_output(struct intel_th_device *thdev,
unsigned int master);
int intel_th_output_enable(struct intel_th *th, unsigned int otype);
enum {
TH_MMIO_CONFIG = 0,
@ -191,8 +237,9 @@ enum {
TH_MMIO_END,
};
#define TH_SUBDEVICE_MAX 6
#define TH_POSSIBLE_OUTPUTS 8
/* Total number of possible subdevices: outputs + GTH + STH */
#define TH_SUBDEVICE_MAX (TH_POSSIBLE_OUTPUTS + 2)
#define TH_CONFIGURABLE_MASTERS 256
#define TH_MSC_MAX 2
@ -201,6 +248,10 @@ enum {
* @dev: driver core's device
* @thdev: subdevices
* @hub: "switch" subdevice (GTH)
* @resource: resources of the entire controller
* @num_thdevs: number of devices in the @thdev array
* @num_resources: number or resources in the @resource array
* @irq: irq number
* @id: this Intel TH controller's device ID in the system
* @major: device node major for output devices
*/
@ -209,6 +260,14 @@ struct intel_th {
struct intel_th_device *thdev[TH_SUBDEVICE_MAX];
struct intel_th_device *hub;
struct intel_th_drvdata *drvdata;
struct resource *resource;
int (*activate)(struct intel_th *);
void (*deactivate)(struct intel_th *);
unsigned int num_thdevs;
unsigned int num_resources;
int irq;
int id;
int major;
@ -220,6 +279,17 @@ struct intel_th {
#endif
};
static inline struct intel_th_device *
to_intel_th_hub(struct intel_th_device *thdev)
{
if (thdev->type == INTEL_TH_SWITCH)
return thdev;
else if (thdev->type == INTEL_TH_OUTPUT)
return to_intel_th_parent(thdev);
return to_intel_th(thdev)->hub;
}
/*
* Register windows
*/
@ -228,6 +298,10 @@ enum {
REG_GTH_OFFSET = 0x0000,
REG_GTH_LENGTH = 0x2000,
/* Timestamp counter unit (TSCU) */
REG_TSCU_OFFSET = 0x2000,
REG_TSCU_LENGTH = 0x1000,
/* Software Trace Hub (STH) [0x4000..0x4fff] */
REG_STH_OFFSET = 0x4000,
REG_STH_LENGTH = 0x2000,
@ -249,16 +323,6 @@ enum {
REG_DCIH_LENGTH = REG_MSU_LENGTH,
};
/*
* GTH, output ports configuration
*/
enum {
GTH_NONE = 0,
GTH_MSU, /* memory/usb */
GTH_CTP, /* Common Trace Port */
GTH_PTI = 4, /* MIPI-PTI */
};
/*
* Scratchpad bits: tell firmware and external debuggers
* what we are up to.

12
drivers/hwtracing/intel_th/msu.c
View File

@ -709,17 +709,17 @@ static int msc_buffer_win_alloc(struct msc *msc, unsigned int nr_blocks)
}
for (i = 0; i < nr_blocks; i++) {
win->block[i].bdesc = dma_alloc_coherent(msc_dev(msc), size,
&win->block[i].addr,
GFP_KERNEL);
win->block[i].bdesc =
dma_alloc_coherent(msc_dev(msc)->parent->parent, size,
&win->block[i].addr, GFP_KERNEL);
if (!win->block[i].bdesc)
goto err_nomem;
#ifdef CONFIG_X86
/* Set the page as uncached */
set_memory_uc((unsigned long)win->block[i].bdesc, 1);
#endif
if (!win->block[i].bdesc)
goto err_nomem;
}
win->msc = msc;

67
drivers/hwtracing/intel_th/pci.c
View File

@ -27,9 +27,53 @@
#define BAR_MASK (BIT(TH_MMIO_CONFIG) | BIT(TH_MMIO_SW))
#define PCI_REG_NPKDSC 0x80
#define NPKDSC_TSACT BIT(5)
static int intel_th_pci_activate(struct intel_th *th)
{
struct pci_dev *pdev = to_pci_dev(th->dev);
u32 npkdsc;
int err;
if (!INTEL_TH_CAP(th, tscu_enable))
return 0;
err = pci_read_config_dword(pdev, PCI_REG_NPKDSC, &npkdsc);
if (!err) {
npkdsc |= NPKDSC_TSACT;
err = pci_write_config_dword(pdev, PCI_REG_NPKDSC, npkdsc);
}
if (err)
dev_err(&pdev->dev, "failed to read NPKDSC register\n");
return err;
}
static void intel_th_pci_deactivate(struct intel_th *th)
{
struct pci_dev *pdev = to_pci_dev(th->dev);
u32 npkdsc;
int err;
if (!INTEL_TH_CAP(th, tscu_enable))
return;
err = pci_read_config_dword(pdev, PCI_REG_NPKDSC, &npkdsc);
if (!err) {
npkdsc |= NPKDSC_TSACT;
err = pci_write_config_dword(pdev, PCI_REG_NPKDSC, npkdsc);
}
if (err)
dev_err(&pdev->dev, "failed to read NPKDSC register\n");
}
static int intel_th_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct intel_th_drvdata *drvdata = (void *)id->driver_data;
struct intel_th *th;
int err;
@ -41,11 +85,16 @@ static int intel_th_pci_probe(struct pci_dev *pdev,
if (err)
return err;
th = intel_th_alloc(&pdev->dev, pdev->resource,
th = intel_th_alloc(&pdev->dev, drvdata, pdev->resource,
DEVICE_COUNT_RESOURCE, pdev->irq);
if (IS_ERR(th))
return PTR_ERR(th);
th->activate = intel_th_pci_activate;
th->deactivate = intel_th_pci_deactivate;
pci_set_master(pdev);
return 0;
}
@ -56,6 +105,10 @@ static void intel_th_pci_remove(struct pci_dev *pdev)
intel_th_free(th);
}
static const struct intel_th_drvdata intel_th_2x = {
.tscu_enable = 1,
};
static const struct pci_device_id intel_th_pci_id_table[] = {
{
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x9d26),
@ -93,7 +146,17 @@ static const struct pci_device_id intel_th_pci_id_table[] = {
{
/* Gemini Lake */
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x318e),
.driver_data = (kernel_ulong_t)0,
.driver_data = (kernel_ulong_t)&intel_th_2x,
},
{
/* Cannon Lake H */
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa326),
.driver_data = (kernel_ulong_t)&intel_th_2x,
},
{
/* Cannon Lake LP */
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x9da6),
.driver_data = (kernel_ulong_t)&intel_th_2x,
},
{ 0 },
};

115
drivers/hwtracing/intel_th/pti.c
View File

@ -1,7 +1,7 @@
/*
* Intel(R) Trace Hub PTI output driver
*
* Copyright (C) 2014-2015 Intel Corporation.
* Copyright (C) 2014-2016 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -34,6 +34,8 @@ struct pti_device {
unsigned int freeclk;
unsigned int clkdiv;
unsigned int patgen;
unsigned int lpp_dest_mask;
unsigned int lpp_dest;
};
/* map PTI widths to MODE settings of PTI_CTL register */
@ -163,6 +165,7 @@ static int intel_th_pti_activate(struct intel_th_device *thdev)
ctl |= PTI_FCEN;
ctl |= pti->mode << __ffs(PTI_MODE);
ctl |= pti->clkdiv << __ffs(PTI_CLKDIV);
ctl |= pti->lpp_dest << __ffs(LPP_DEST);
iowrite32(ctl, pti->base + REG_PTI_CTL);
@ -192,6 +195,15 @@ static void read_hw_config(struct pti_device *pti)
pti->mode = pti_width_mode(4);
if (!pti->clkdiv)
pti->clkdiv = 1;
if (pti->thdev->output.type == GTH_LPP) {
if (ctl & LPP_PTIPRESENT)
pti->lpp_dest_mask |= LPP_DEST_PTI;
if (ctl & LPP_BSSBPRESENT)
pti->lpp_dest_mask |= LPP_DEST_EXI;
if (ctl & LPP_DEST)
pti->lpp_dest = 1;
}
}
static int intel_th_pti_probe(struct intel_th_device *thdev)
@ -239,10 +251,103 @@ static struct intel_th_driver intel_th_pti_driver = {
},
};
module_driver(intel_th_pti_driver,
intel_th_driver_register,
intel_th_driver_unregister);
static const char * const lpp_dest_str[] = { "pti", "exi" };
static ssize_t lpp_dest_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct pti_device *pti = dev_get_drvdata(dev);
ssize_t ret = 0;
int i;
for (i = ARRAY_SIZE(lpp_dest_str) - 1; i >= 0; i--) {
const char *fmt = pti->lpp_dest == i ? "[%s] " : "%s ";
if (!(pti->lpp_dest_mask & BIT(i)))
continue;
ret += scnprintf(buf + ret, PAGE_SIZE - ret,
fmt, lpp_dest_str[i]);
}
if (ret)
buf[ret - 1] = '\n';
return ret;
}
static ssize_t lpp_dest_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
{
struct pti_device *pti = dev_get_drvdata(dev);
ssize_t ret = -EINVAL;
int i;
for (i = 0; i < ARRAY_SIZE(lpp_dest_str); i++)
if (sysfs_streq(buf, lpp_dest_str[i]))
break;
if (i < ARRAY_SIZE(lpp_dest_str) && pti->lpp_dest_mask & BIT(i)) {
pti->lpp_dest = i;
ret = size;
}
return ret;
}
static DEVICE_ATTR_RW(lpp_dest);
static struct attribute *lpp_output_attrs[] = {
&dev_attr_mode.attr,
&dev_attr_freerunning_clock.attr,
&dev_attr_clock_divider.attr,
&dev_attr_lpp_dest.attr,
NULL,
};
static struct attribute_group lpp_output_group = {
.attrs = lpp_output_attrs,
};
static struct intel_th_driver intel_th_lpp_driver = {
.probe = intel_th_pti_probe,
.remove = intel_th_pti_remove,
.activate = intel_th_pti_activate,
.deactivate = intel_th_pti_deactivate,
.attr_group = &lpp_output_group,
.driver = {
.name = "lpp",
.owner = THIS_MODULE,
},
};
static int __init intel_th_pti_lpp_init(void)
{
int err;
err = intel_th_driver_register(&intel_th_pti_driver);
if (err)
return err;
err = intel_th_driver_register(&intel_th_lpp_driver);
if (err) {
intel_th_driver_unregister(&intel_th_pti_driver);
return err;
}
return 0;
}
module_init(intel_th_pti_lpp_init);
static void __exit intel_th_pti_lpp_exit(void)
{
intel_th_driver_unregister(&intel_th_pti_driver);
intel_th_driver_unregister(&intel_th_lpp_driver);
}
module_exit(intel_th_pti_lpp_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Intel(R) Trace Hub PTI output driver");
MODULE_DESCRIPTION("Intel(R) Trace Hub PTI/LPP output driver");
MODULE_AUTHOR("Alexander Shishkin <alexander.shishkin@linux.intel.com>");

8
drivers/hwtracing/intel_th/pti.h
View File

@ -23,7 +23,15 @@ enum {
#define PTI_EN BIT(0)
#define PTI_FCEN BIT(1)
#define PTI_MODE 0xf0
#define LPP_PTIPRESENT BIT(8)
#define LPP_BSSBPRESENT BIT(9)
#define PTI_CLKDIV 0x000f0000
#define PTI_PATGENMODE 0x00f00000
#define LPP_DEST BIT(25)
#define LPP_BSSBACT BIT(30)
#define LPP_LPPBUSY BIT(31)
#define LPP_DEST_PTI BIT(0)
#define LPP_DEST_EXI BIT(1)
#endif /* __INTEL_TH_STH_H__ */

2
drivers/hwtracing/stm/core.c
View File

@ -566,7 +566,7 @@ static int stm_char_policy_set_ioctl(struct stm_file *stmf, void __user *arg)
if (copy_from_user(&size, arg, sizeof(size)))
return -EFAULT;
if (size >= PATH_MAX + sizeof(*id))
if (size < sizeof(*id) || size >= PATH_MAX + sizeof(*id))
return -EINVAL;
/*

15
drivers/mcb/mcb-lpc.c
View File

@ -114,6 +114,12 @@ static struct resource sc24_fpga_resource = {
.flags = IORESOURCE_MEM,
};
static struct resource sc31_fpga_resource = {
.start = 0xf000e000,
.end = 0xf000e000 + CHAM_HEADER_SIZE,
.flags = IORESOURCE_MEM,
};
static struct platform_driver mcb_lpc_driver = {
.driver = {
.name = "mcb-lpc",
@ -132,6 +138,15 @@ static const struct dmi_system_id mcb_lpc_dmi_table[] = {
.driver_data = (void *)&sc24_fpga_resource,
.callback = mcb_lpc_create_platform_device,
},
{
.ident = "SC31",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MEN"),
DMI_MATCH(DMI_PRODUCT_VERSION, "14SC31"),
},
.driver_data = (void *)&sc31_fpga_resource,
.callback = mcb_lpc_create_platform_device,
},
{}
};
MODULE_DEVICE_TABLE(dmi, mcb_lpc_dmi_table);

6
drivers/mcb/mcb-parse.c
View File

@ -182,7 +182,7 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase,
int num_cells = 0;
uint32_t dtype;
int bar_count;
int ret = 0;
int ret;
u32 hsize;
hsize = sizeof(struct chameleon_fpga_header);
@ -210,8 +210,10 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase,
header->filename);
bar_count = chameleon_get_bar(&p, mapbase, &cb);
if (bar_count < 0)
if (bar_count < 0) {
ret = bar_count;
goto free_header;
}
for_each_chameleon_cell(dtype, p) {
switch (dtype) {

1
drivers/misc/Makefile
View File

@ -60,6 +60,7 @@ lkdtm-$(CONFIG_LKDTM) += lkdtm_core.o
lkdtm-$(CONFIG_LKDTM) += lkdtm_bugs.o
lkdtm-$(CONFIG_LKDTM) += lkdtm_heap.o
lkdtm-$(CONFIG_LKDTM) += lkdtm_perms.o
lkdtm-$(CONFIG_LKDTM) += lkdtm_refcount.o
lkdtm-$(CONFIG_LKDTM) += lkdtm_rodata_objcopy.o
lkdtm-$(CONFIG_LKDTM) += lkdtm_usercopy.o

4
drivers/misc/apds9802als.c
View File

@ -197,7 +197,7 @@ static struct attribute *mid_att_als[] = {
NULL
};
static struct attribute_group m_als_gr = {
static const struct attribute_group m_als_gr = {
.name = "apds9802als",
.attrs = mid_att_als
};
@ -298,7 +298,7 @@ static UNIVERSAL_DEV_PM_OPS(apds9802als_pm_ops, apds9802als_suspend,
#define APDS9802ALS_PM_OPS NULL
#endif /* CONFIG_PM */
static struct i2c_device_id apds9802als_id[] = {
static const struct i2c_device_id apds9802als_id[] = {
{ DRIVER_NAME, 0 },
{ }
};

2
drivers/misc/apds990x.c
View File

@ -1051,7 +1051,7 @@ static struct attribute *sysfs_attrs_ctrl[] = {
NULL
};
static struct attribute_group apds990x_attribute_group[] = {
static const struct attribute_group apds990x_attribute_group[] = {
{.attrs = sysfs_attrs_ctrl },
};

34
drivers/misc/aspeed-lpc-snoop.c
View File

@ -20,6 +20,7 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@ -51,6 +52,13 @@
#define HICRB_ENSNP0D BIT(14)
#define HICRB_ENSNP1D BIT(15)
struct aspeed_lpc_snoop_model_data {
/* The ast2400 has bits 14 and 15 as reserved, whereas the ast2500
* can use them.
*/
unsigned int has_hicrb_ensnp;
};
struct aspeed_lpc_snoop {
struct regmap *regmap;
int irq;
@ -123,10 +131,13 @@ static int aspeed_lpc_snoop_config_irq(struct aspeed_lpc_snoop *lpc_snoop,
}
static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
int channel, u16 lpc_port)
struct device *dev,
int channel, u16 lpc_port)
{
int rc = 0;
u32 hicr5_en, snpwadr_mask, snpwadr_shift, hicrb_en;
const struct aspeed_lpc_snoop_model_data *model_data =
of_device_get_match_data(dev);
/* Create FIFO datastructure */
rc = kfifo_alloc(&lpc_snoop->snoop_fifo[channel],
@ -155,7 +166,9 @@ static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
regmap_update_bits(lpc_snoop->regmap, HICR5, hicr5_en, hicr5_en);
regmap_update_bits(lpc_snoop->regmap, SNPWADR, snpwadr_mask,
lpc_port << snpwadr_shift);
regmap_update_bits(lpc_snoop->regmap, HICRB, hicrb_en, hicrb_en);
if (model_data->has_hicrb_ensnp)
regmap_update_bits(lpc_snoop->regmap, HICRB,
hicrb_en, hicrb_en);
return rc;
}
@ -213,14 +226,14 @@ static int aspeed_lpc_snoop_probe(struct platform_device *pdev)
if (rc)
return rc;
rc = aspeed_lpc_enable_snoop(lpc_snoop, 0, port);
rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 0, port);
if (rc)
return rc;
/* Configuration of 2nd snoop channel port is optional */
if (of_property_read_u32_index(dev->of_node, "snoop-ports",
1, &port) == 0) {
rc = aspeed_lpc_enable_snoop(lpc_snoop, 1, port);
rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 1, port);
if (rc)
aspeed_lpc_disable_snoop(lpc_snoop, 0);
}
@ -239,8 +252,19 @@ static int aspeed_lpc_snoop_remove(struct platform_device *pdev)
return 0;
}
static const struct aspeed_lpc_snoop_model_data ast2400_model_data = {
.has_hicrb_ensnp = 0,
};
static const struct aspeed_lpc_snoop_model_data ast2500_model_data = {
.has_hicrb_ensnp = 1,
};
static const struct of_device_id aspeed_lpc_snoop_match[] = {
{ .compatible = "aspeed,ast2500-lpc-snoop" },
{ .compatible = "aspeed,ast2400-lpc-snoop",
.data = &ast2400_model_data },
{ .compatible = "aspeed,ast2500-lpc-snoop",
.data = &ast2500_model_data },
{ },
};

2
drivers/misc/bh1770glc.c
View File

@ -1175,7 +1175,7 @@ static struct attribute *sysfs_attrs[] = {
NULL
};
static struct attribute_group bh1770_attribute_group = {
static const struct attribute_group bh1770_attribute_group = {
.attrs = sysfs_attrs
};

Some files were not shown because too many files have changed in this diff Show More