media: ov5640: Fix timings setup code
As of: commit476dec012f
("media: ov5640: Add horizontal and vertical totals") the timings parameters gets programmed separately from the static register values array. When changing capture mode, the vertical and horizontal totals gets inspected by the set_mode_exposure_calc() functions, and only later programmed with the new values. This means exposure, light banding filter and shutter gain are calculated using the previous timings, and are thus not correct. Fix this by programming timings right after the static register value table has been sent to the sensor in the ov5640_load_regs() function. Fixes:476dec012f
("media: ov5640: Add horizontal and vertical totals") Tested-by: Steve Longerbeam <slongerbeam@gmail.com> # i.MX6q SabreSD, CSI-2 Tested-by: Loic Poulain <loic.poulain@linaro.org> # Dragonboard-410c, CSI-2 Signed-off-by: Samuel Bobrowicz <sam@elite-embedded.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This commit is contained in:
parent
aa4bb8b883
commit
bad1774ed4
|
@ -909,6 +909,26 @@ static int ov5640_mod_reg(struct ov5640_dev *sensor, u16 reg,
|
|||
}
|
||||
|
||||
/* download ov5640 settings to sensor through i2c */
|
||||
static int ov5640_set_timings(struct ov5640_dev *sensor,
|
||||
const struct ov5640_mode_info *mode)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPHO, mode->hact);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPVO, mode->vact);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_HTS, mode->htot);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return ov5640_write_reg16(sensor, OV5640_REG_TIMING_VTS, mode->vtot);
|
||||
}
|
||||
|
||||
static int ov5640_load_regs(struct ov5640_dev *sensor,
|
||||
const struct ov5640_mode_info *mode)
|
||||
{
|
||||
|
@ -936,7 +956,7 @@ static int ov5640_load_regs(struct ov5640_dev *sensor,
|
|||
usleep_range(1000 * delay_ms, 1000 * delay_ms + 100);
|
||||
}
|
||||
|
||||
return ret;
|
||||
return ov5640_set_timings(sensor, mode);
|
||||
}
|
||||
|
||||
/* read exposure, in number of line periods */
|
||||
|
@ -1399,30 +1419,6 @@ static int ov5640_set_virtual_channel(struct ov5640_dev *sensor)
|
|||
return ov5640_write_reg(sensor, OV5640_REG_DEBUG_MODE, temp);
|
||||
}
|
||||
|
||||
static int ov5640_set_timings(struct ov5640_dev *sensor,
|
||||
const struct ov5640_mode_info *mode)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPHO, mode->hact);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPVO, mode->vact);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_HTS, mode->htot);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_VTS, mode->vtot);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct ov5640_mode_info *
|
||||
ov5640_find_mode(struct ov5640_dev *sensor, enum ov5640_frame_rate fr,
|
||||
int width, int height, bool nearest)
|
||||
|
@ -1663,10 +1659,6 @@ static int ov5640_set_mode(struct ov5640_dev *sensor,
|
|||
ret = ov5640_set_mode_direct(sensor, mode, exposure);
|
||||
}
|
||||
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = ov5640_set_timings(sensor, mode);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
|
|
Loading…
Reference in New Issue