arm/imx6q: add core definitions and low-level debug uart

It adds the core definitions and low-level debug uart support
for imx6q.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Shawn Guo 2011-10-02 15:09:11 +08:00 committed by Arnd Bergmann
parent 7d740f87fd
commit bac89d754b
12 changed files with 118 additions and 3 deletions

View File

@ -1402,7 +1402,7 @@ config SMP
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || SOC_IMX6Q
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
help

View File

@ -184,6 +184,13 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
config DEBUG_IMX6Q_UART
bool "i.MX6Q Debug UART"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
on i.MX6Q.
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
bool "Use S3C UART 0 for low-level debug"

View File

@ -160,6 +160,7 @@ machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
machine-$(CONFIG_ARCH_MX3) := imx
machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MX6) := imx
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik

View File

@ -592,3 +592,18 @@ config MACH_VPR200
configurations for the board and its peripherals.
endif
if ARCH_MX6
comment "i.MX6 family:"
config SOC_IMX6Q
bool "i.MX6 Quad support"
select ARM_GIC
select CACHE_L2X0
select CPU_V7
select USE_OF
help
This enables support for Freescale i.MX6 Quad processor.
endif

View File

@ -60,3 +60,5 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
obj-$(CONFIG_DEBUG_LL) += lluart.o

View File

@ -17,3 +17,7 @@ initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
zreladdr-$(CONFIG_ARCH_MX3) := 0x80008000
params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000

View File

@ -0,0 +1,32 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/init.h>
#include <asm/page.h>
#include <asm/sizes.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
static struct map_desc imx_lluart_desc = {
#ifdef CONFIG_DEBUG_IMX6Q_UART
.virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
.pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
.length = MX6Q_UART4_SIZE,
.type = MT_DEVICE,
#endif
};
void __init imx_lluart_map_io(void)
{
if (imx_lluart_desc.virtual)
iotable_init(&imx_lluart_desc, 1);
}

View File

@ -29,6 +29,13 @@ config ARCH_MX5
This enables support for machines using Freescale's i.MX50 and i.MX51
processors.
config ARCH_MX6
bool "i.MX6"
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
help
This enables support for systems based on the Freescale i.MX6 family
endchoice
source "arch/arm/mach-imx/Kconfig"

View File

@ -24,6 +24,8 @@
#define UART_PADDR MX51_UART1_BASE_ADDR
#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR MX53_UART1_BASE_ADDR
#elif defined (CONFIG_DEBUG_IMX6Q_UART)
#define UART_PADDR MX6Q_UART4_BASE_ADDR
#endif
#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)

View File

@ -91,6 +91,11 @@
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx6q:
* SCU 0x00a00000+0x001000 -> 0xf4000000+0x001000
* CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000
* ANATOP 0x020c8000+0x001000 -> 0xf42c8000+0x001000
* UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000
*/
#define IMX_IO_P2V(x) ( \
0xf4000000 + \
@ -102,6 +107,7 @@
#include <mach/mxc.h>
#include <mach/mx6q.h>
#include <mach/mx50.h>
#include <mach/mx51.h>
#include <mach/mx53.h>

View File

@ -14,9 +14,15 @@
#include <asm-generic/gpio.h>
/*
* SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
* SoCs with GIC interrupt controller have 160 IRQs, those with TZIC
* have 128 IRQs, and those with AVIC have 64.
*
* To support single image, the biggest number should be defined on
* top of the list.
*/
#ifdef CONFIG_MXC_TZIC
#if defined CONFIG_ARM_GIC
#define MXC_INTERNAL_IRQS 160
#elif defined CONFIG_MXC_TZIC
#define MXC_INTERNAL_IRQS 128
#else
#define MXC_INTERNAL_IRQS 64

View File

@ -0,0 +1,33 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#ifndef __MACH_MX6Q_H__
#define __MACH_MX6Q_H__
#define MX6Q_IO_P2V(x) IMX_IO_P2V(x)
#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x))
/*
* The following are the blocks that need to be statically mapped.
* For other blocks, the base address really should be retrieved from
* device tree.
*/
#define MX6Q_SCU_BASE_ADDR 0x00a00000
#define MX6Q_SCU_SIZE 0x1000
#define MX6Q_CCM_BASE_ADDR 0x020c4000
#define MX6Q_CCM_SIZE 0x4000
#define MX6Q_ANATOP_BASE_ADDR 0x020c8000
#define MX6Q_ANATOP_SIZE 0x1000
#define MX6Q_UART4_BASE_ADDR 0x021f0000
#define MX6Q_UART4_SIZE 0x4000
#endif /* __MACH_MX6Q_H__ */