hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

x86/mm: Flush more aggressively in lazy TLB mode 

Since commit:

  94b1b03b51 ("x86/mm: Rework lazy TLB mode and TLB freshness tracking")

x86's lazy TLB mode has been all the way lazy: when running a kernel thread
(including the idle thread), the kernel keeps using the last user mm's
page tables without attempting to maintain user TLB coherence at all.

From a pure semantic perspective, this is fine -- kernel threads won't
attempt to access user pages, so having stale TLB entries doesn't matter.

Unfortunately, I forgot about a subtlety.  By skipping TLB flushes,
we also allow any paging-structure caches that may exist on the CPU
to become incoherent.  This means that we can have a
paging-structure cache entry that references a freed page table, and
the CPU is within its rights to do a speculative page walk starting
at the freed page table.

I can imagine this causing two different problems:

 - A speculative page walk starting from a bogus page table could read
   IO addresses.  I haven't seen any reports of this causing problems.

 - A speculative page walk that involves a bogus page table can install
   garbage in the TLB.  Such garbage would always be at a user VA, but
   some AMD CPUs have logic that triggers a machine check when it notices
   these bogus entries.  I've seen a couple reports of this.

Boris further explains the failure mode:

> It is actually more of an optimization which assumes that paging-structure
> entries are in WB DRAM:
>
> "TlbCacheDis: cacheable memory disable. Read-write. 0=Enables
> performance optimization that assumes PML4, PDP, PDE, and PTE entries
> are in cacheable WB-DRAM; memory type checks may be bypassed, and
> addresses outside of WB-DRAM may result in undefined behavior or NB
> protocol errors. 1=Disables performance optimization and allows PML4,
> PDP, PDE and PTE entries to be in any memory type. Operating systems
> that maintain page tables in memory types other than WB- DRAM must set
> TlbCacheDis to insure proper operation."
>
> The MCE generated is an NB protocol error to signal that
>
> "Link: A specific coherent-only packet from a CPU was issued to an
> IO link. This may be caused by software which addresses page table
> structures in a memory type other than cacheable WB-DRAM without
> properly configuring MSRC001_0015[TlbCacheDis]. This may occur, for
> example, when page table structure addresses are above top of memory. In
> such cases, the NB will generate an MCE if it sees a mismatch between
> the memory operation generated by the core and the link type."
>
> I'm assuming coherent-only packets don't go out on IO links, thus the
> error.

To fix this, reinstate TLB coherence in lazy mode.  With this patch
applied, we do it in one of two ways:

 - If we have PCID, we simply switch back to init_mm's page tables
   when we enter a kernel thread -- this seems to be quite cheap
   except for the cost of serializing the CPU.

 - If we don't have PCID, then we set a flag and switch to init_mm
   the first time we would otherwise need to flush the TLB.

The /sys/kernel/debug/x86/tlb_use_lazy_mode debug switch can be changed
to override the default mode for benchmarking.

In theory, we could optimize this better by only flushing the TLB in
lazy CPUs when a page table is freed.  Doing that would require
auditing the mm code to make sure that all page table freeing goes
through tlb_remove_page() as well as reworking some data structures
to implement the improved flush logic.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Johannes Hirte <johannes.hirte@datenkhaos.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 94b1b03b51 ("x86/mm: Rework lazy TLB mode and TLB freshness tracking")
Link: http://lkml.kernel.org/r/20171009170231.fkpraqokz6e4zeco@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit is contained in:
Andy Lutomirski 2017-10-09 09:50:49 -07:00 committed by Ingo Molnar
parent 616dd5872e
commit b956575bed
3 changed files with 136 additions and 49 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
arch/x86/include/asm/mmu_context.h
View File

@ -126,13 +126,7 @@ static inline void switch_ldt(struct mm_struct *prev, struct mm_struct *next)
DEBUG_LOCKS_WARN_ON(preemptible());
}
static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
int cpu = smp_processor_id();
if (cpumask_test_cpu(cpu, mm_cpumask(mm)))
cpumask_clear_cpu(cpu, mm_cpumask(mm));
}
void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk);
static inline int init_new_context(struct task_struct *tsk,
struct mm_struct *mm)

24
arch/x86/include/asm/tlbflush.h
View File

@ -82,6 +82,13 @@ static inline u64 inc_mm_tlb_gen(struct mm_struct *mm)
#define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
#endif
/*
* If tlb_use_lazy_mode is true, then we try to avoid switching CR3 to point
* to init_mm when we switch to a kernel thread (e.g. the idle thread). If
* it's false, then we immediately switch CR3 when entering a kernel thread.
*/
DECLARE_STATIC_KEY_TRUE(tlb_use_lazy_mode);
/*
* 6 because 6 should be plenty and struct tlb_state will fit in
* two cache lines.
@ -104,6 +111,23 @@ struct tlb_state {
u16 loaded_mm_asid;
u16 next_asid;
/*
* We can be in one of several states:
*
* - Actively using an mm. Our CPU's bit will be set in
* mm_cpumask(loaded_mm) and is_lazy == false;
*
* - Not using a real mm. loaded_mm == &init_mm. Our CPU's bit
* will not be set in mm_cpumask(&init_mm) and is_lazy == false.
*
* - Lazily using a real mm. loaded_mm != &init_mm, our bit
* is set in mm_cpumask(loaded_mm), but is_lazy == true.
* We're heuristically guessing that the CR3 load we
* skipped more than makes up for the overhead added by
* lazy mode.
*/
bool is_lazy;
/*
* Access to this CR4 shadow and to H/W CR4 is protected by
* disabling interrupts when modifying either one.

153
arch/x86/mm/tlb.c
View File

@ -30,6 +30,8 @@
atomic64_t last_mm_ctx_id = ATOMIC64_INIT(1);
DEFINE_STATIC_KEY_TRUE(tlb_use_lazy_mode);
static void choose_new_asid(struct mm_struct *next, u64 next_tlb_gen,
u16 *new_asid, bool *need_flush)
{
@ -80,7 +82,7 @@ void leave_mm(int cpu)
return;
/* Warn if we're not lazy. */
WARN_ON(cpumask_test_cpu(smp_processor_id(), mm_cpumask(loaded_mm)));
WARN_ON(!this_cpu_read(cpu_tlbstate.is_lazy));
switch_mm(NULL, &init_mm, NULL);
}
@ -142,45 +144,24 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
__flush_tlb_all();
}
#endif
this_cpu_write(cpu_tlbstate.is_lazy, false);
if (real_prev == next) {
VM_BUG_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) !=
next->context.ctx_id);
if (cpumask_test_cpu(cpu, mm_cpumask(next))) {
/*
* There's nothing to do: we weren't lazy, and we
* aren't changing our mm. We don't need to flush
* anything, nor do we need to update CR3, CR4, or
* LDTR.
*/
return;
}
/* Resume remote flushes and then read tlb_gen. */
cpumask_set_cpu(cpu, mm_cpumask(next));
next_tlb_gen = atomic64_read(&next->context.tlb_gen);
if (this_cpu_read(cpu_tlbstate.ctxs[prev_asid].tlb_gen) <
next_tlb_gen) {
/*
* Ideally, we'd have a flush_tlb() variant that
* takes the known CR3 value as input. This would
* be faster on Xen PV and on hypothetical CPUs
* on which INVPCID is fast.
*/
this_cpu_write(cpu_tlbstate.ctxs[prev_asid].tlb_gen,
next_tlb_gen);
write_cr3(build_cr3(next, prev_asid));
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH,
TLB_FLUSH_ALL);
}
/*
* We just exited lazy mode, which means that CR4 and/or LDTR
* may be stale. (Changes to the required CR4 and LDTR states
* are not reflected in tlb_gen.)
* We don't currently support having a real mm loaded without
* our cpu set in mm_cpumask(). We have all the bookkeeping
* in place to figure out whether we would need to flush
* if our cpu were cleared in mm_cpumask(), but we don't
* currently use it.
*/
if (WARN_ON_ONCE(real_prev != &init_mm &&
!cpumask_test_cpu(cpu, mm_cpumask(next))))
cpumask_set_cpu(cpu, mm_cpumask(next));
return;
} else {
u16 new_asid;
bool need_flush;
@ -199,10 +180,9 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
}
/* Stop remote flushes for the previous mm */
if (cpumask_test_cpu(cpu, mm_cpumask(real_prev)))
cpumask_clear_cpu(cpu, mm_cpumask(real_prev));
VM_WARN_ON_ONCE(cpumask_test_cpu(cpu, mm_cpumask(next)));
VM_WARN_ON_ONCE(!cpumask_test_cpu(cpu, mm_cpumask(real_prev)) &&
real_prev != &init_mm);
cpumask_clear_cpu(cpu, mm_cpumask(real_prev));
/*
* Start remote flushes and then read tlb_gen.
@ -232,6 +212,37 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
switch_ldt(real_prev, next);
}
/*
* enter_lazy_tlb() is a hint from the scheduler that we are entering a
* kernel thread or other context without an mm. Acceptable implementations
* include doing nothing whatsoever, switching to init_mm, or various clever
* lazy tricks to try to minimize TLB flushes.
*
* The scheduler reserves the right to call enter_lazy_tlb() several times
* in a row. It will notify us that we're going back to a real mm by
* calling switch_mm_irqs_off().
*/
void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
if (this_cpu_read(cpu_tlbstate.loaded_mm) == &init_mm)
return;
if (static_branch_unlikely(&tlb_use_lazy_mode)) {
/*
* There's a significant optimization that may be possible
* here. We have accurate enough TLB flush tracking that we
* don't need to maintain coherence of TLB per se when we're
* lazy. We do, however, need to maintain coherence of
* paging-structure caches. We could, in principle, leave our
* old mm loaded and only switch to init_mm when
* tlb_remove_page() happens.
*/
this_cpu_write(cpu_tlbstate.is_lazy, true);
} else {
switch_mm(NULL, &init_mm, NULL);
}
}
/*
* Call this when reinitializing a CPU. It fixes the following potential
* problems:
@ -303,16 +314,20 @@ static void flush_tlb_func_common(const struct flush_tlb_info *f,
/* This code cannot presently handle being reentered. */
VM_WARN_ON(!irqs_disabled());
if (unlikely(loaded_mm == &init_mm))
return;
VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[loaded_mm_asid].ctx_id) !=
loaded_mm->context.ctx_id);
if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(loaded_mm))) {
if (this_cpu_read(cpu_tlbstate.is_lazy)) {
/*
* We're in lazy mode -- don't flush. We can get here on
* remote flushes due to races and on local flushes if a
* kernel thread coincidentally flushes the mm it's lazily
* still using.
* We're in lazy mode. We need to at least flush our
* paging-structure cache to avoid speculatively reading
* garbage into our TLB. Since switching to init_mm is barely
* slower than a minimal flush, just switch to init_mm.
*/
switch_mm_irqs_off(NULL, &init_mm, NULL);
return;
}
@ -611,3 +626,57 @@ static int __init create_tlb_single_page_flush_ceiling(void)
return 0;
}
late_initcall(create_tlb_single_page_flush_ceiling);
static ssize_t tlblazy_read_file(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
char buf[2];
buf[0] = static_branch_likely(&tlb_use_lazy_mode) ? '1' : '0';
buf[1] = '\n';
return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
}
static ssize_t tlblazy_write_file(struct file *file,
const char __user *user_buf, size_t count, loff_t *ppos)
{
bool val;
if (kstrtobool_from_user(user_buf, count, &val))
return -EINVAL;
if (val)
static_branch_enable(&tlb_use_lazy_mode);
else
static_branch_disable(&tlb_use_lazy_mode);
return count;
}
static const struct file_operations fops_tlblazy = {
.read = tlblazy_read_file,
.write = tlblazy_write_file,
.llseek = default_llseek,
};
static int __init init_tlb_use_lazy_mode(void)
{
if (boot_cpu_has(X86_FEATURE_PCID)) {
/*
* Heuristic: with PCID on, switching to and from
* init_mm is reasonably fast, but remote flush IPIs
* as expensive as ever, so turn off lazy TLB mode.
*
* We can't do this in setup_pcid() because static keys
* haven't been initialized yet, and it would blow up
* badly.
*/
static_branch_disable(&tlb_use_lazy_mode);
}
debugfs_create_file("tlb_use_lazy_mode", S_IRUSR | S_IWUSR,
arch_debugfs_dir, NULL, &fops_tlblazy);
return 0;
}
late_initcall(init_tlb_use_lazy_mode);