diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 038179ecf6a9..d8ed6676ae86 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -55,8 +55,21 @@ config GENERIC_TIME config GENERIC_CLOCKEVENTS def_bool n +config SYS_SUPPORTS_PM + bool + config SYS_SUPPORTS_APM_EMULATION bool + select SYS_SUPPORTS_PM + +config SYS_SUPPORTS_SMP + bool + +config SYS_SUPPORTS_NUMA + bool + +config SYS_SUPPORTS_PCI + bool config ARCH_MAY_HAVE_PC_FDC bool @@ -81,257 +94,8 @@ source "init/Kconfig" menu "System type" -config SOLUTION_ENGINE - bool - -choice - prompt "SuperH system type" - default SH_UNKNOWN - -config SH_SOLUTION_ENGINE - bool "SolutionEngine" - select SOLUTION_ENGINE - help - Select SolutionEngine if configuring for a Hitachi SH7709 - or SH7750 evaluation board. - -config SH_7722_SOLUTION_ENGINE - bool "SolutionEngine7722" - select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7722 - help - Select 7722 SolutionEngine if configuring for a Hitachi SH772 - evaluation board. - -config SH_7751_SOLUTION_ENGINE - bool "SolutionEngine7751" - select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7751 - help - Select 7751 SolutionEngine if configuring for a Hitachi SH7751 - evaluation board. - -config SH_7780_SOLUTION_ENGINE - bool "SolutionEngine7780" - select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7780 - help - Select 7780 SolutionEngine if configuring for a Renesas SH7780 - evaluation board. - -config SH_7300_SOLUTION_ENGINE - bool "SolutionEngine7300" - select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7300 - help - Select 7300 SolutionEngine if configuring for a Hitachi - SH7300(SH-Mobile V) evaluation board. - -config SH_7343_SOLUTION_ENGINE - bool "SolutionEngine7343" - select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7343 - help - Select 7343 SolutionEngine if configuring for a Hitachi - SH7343 (SH-Mobile 3AS) evaluation board. - -config SH_73180_SOLUTION_ENGINE - bool "SolutionEngine73180" - select SOLUTION_ENGINE - select CPU_SUBTYPE_SH73180 - help - Select 73180 SolutionEngine if configuring for a Hitachi - SH73180(SH-Mobile 3) evaluation board. - -config SH_7751_SYSTEMH - bool "SystemH7751R" - select CPU_SUBTYPE_SH7751R - help - Select SystemH if you are configuring for a Renesas SystemH - 7751R evaluation board. - -config SH_HP6XX - bool "HP6XX" - select SYS_SUPPORTS_APM_EMULATION - help - Select HP6XX if configuring for a HP jornada HP6xx. - More information (hardware only) at - . - -config SH_SATURN - bool "Saturn" - select CPU_SUBTYPE_SH7604 - help - Select Saturn if configuring for a SEGA Saturn. - -config SH_DREAMCAST - bool "Dreamcast" - select CPU_SUBTYPE_SH7091 - help - Select Dreamcast if configuring for a SEGA Dreamcast. - More information at - . There is a - Dreamcast project is at . - -config SH_MPC1211 - bool "Interface MPC1211" - help - CTP/PCI-SH02 is a CPU module computer that is produced - by Interface Corporation. - More information at - -config SH_SH03 - bool "Interface CTP/PCI-SH03" - help - CTP/PCI-SH03 is a CPU module computer that is produced - by Interface Corporation. - More information at - -config SH_SECUREEDGE5410 - bool "SecureEdge5410" - select CPU_SUBTYPE_SH7751R - help - Select SecureEdge5410 if configuring for a SnapGear SH board. - This includes both the OEM SecureEdge products as well as the - SME product line. - -config SH_HS7751RVOIP - bool "HS7751RVOIP" - select CPU_SUBTYPE_SH7751R - help - Select HS7751RVOIP if configuring for a Renesas Technology - Sales VoIP board. - -config SH_7710VOIPGW - bool "SH7710-VOIP-GW" - select CPU_SUBTYPE_SH7710 - help - Select this option to build a kernel for the SH7710 based - VOIP GW. - -config SH_RTS7751R2D - bool "RTS7751R2D" - select CPU_SUBTYPE_SH7751R - help - Select RTS7751R2D if configuring for a Renesas Technology - Sales SH-Graphics board. - -config SH_HIGHLANDER - bool "Highlander" - -config SH_EDOSK7705 - bool "EDOSK7705" - select CPU_SUBTYPE_SH7705 - -config SH_SH4202_MICRODEV - bool "SH4-202 MicroDev" - select CPU_SUBTYPE_SH4_202 - help - Select SH4-202 MicroDev if configuring for a SuperH MicroDev board - with an SH4-202 CPU. - -config SH_LANDISK - bool "LANDISK" - select CPU_SUBTYPE_SH7751R - help - I-O DATA DEVICE, INC. "LANDISK Series" support. - -config SH_TITAN - bool "TITAN" - select CPU_SUBTYPE_SH7751R - help - Select Titan if you are configuring for a Nimble Microsystems - NetEngine NP51R. - -config SH_SHMIN - bool "SHMIN" - select CPU_SUBTYPE_SH7706 - help - Select SHMIN if configuring for the SHMIN board. - -config SH_7206_SOLUTION_ENGINE - bool "SolutionEngine7206" - select CPU_SUBTYPE_SH7206 - help - Select 7206 SolutionEngine if configuring for a Hitachi SH7206 - evaluation board. - -config SH_7619_SOLUTION_ENGINE - bool "SolutionEngine7619" - select CPU_SUBTYPE_SH7619 - help - Select 7619 SolutionEngine if configuring for a Hitachi SH7619 - evaluation board. - -config SH_LBOX_RE2 - bool "L-BOX RE2" - select CPU_SUBTYPE_SH7751R - help - Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. - -config SH_UNKNOWN - bool "BareCPU" - help - "Bare CPU" aka "unknown" means an SH-based system which is not one - of the specific ones mentioned above, which means you need to enter - all sorts of stuff like CONFIG_MEMORY_START because the config - system doesn't already know what it is. You get a machine vector - without any platform-specific code in it, so things like the RTC may - not work. - - This option is for the early stages of porting to a new machine. - -endchoice - -source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" -source "arch/sh/boards/renesas/rts7751r2d/Kconfig" -source "arch/sh/boards/renesas/r7780rp/Kconfig" - source "arch/sh/mm/Kconfig" -config CF_ENABLER - bool "Compact Flash Enabler support" - depends on SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_SH03 - ---help--- - Compact Flash is a small, removable mass storage device introduced - in 1994 originally as a PCMCIA device. If you say `Y' here, you - compile in support for Compact Flash devices directly connected to - a SuperH processor. A Compact Flash FAQ is available at - . - - If your board has "Directly Connected" CompactFlash at area 5 or 6, - you may want to enable this option. Then, you can use CF as - primary IDE drive (only tested for SanDisk). - - If in doubt, select 'N'. - -choice - prompt "Compact Flash Connection Area" - depends on CF_ENABLER - default CF_AREA6 - -config CF_AREA5 - bool "Area5" - help - If your board has "Directly Connected" CompactFlash, You should - select the area where your CF is connected to. - - - "Area5" if CompactFlash is connected to Area 5 (0x14000000) - - "Area6" if it is connected to Area 6 (0x18000000) - - "Area6" will work for most boards. - -config CF_AREA6 - bool "Area6" - -endchoice - -config CF_BASE_ADDR - hex - depends on CF_ENABLER - default "0xb8000000" if CF_AREA6 - default "0xb4000000" if CF_AREA5 - menu "Processor features" choice @@ -351,7 +115,7 @@ endchoice config SH_FPU bool "FPU support" - depends on !CPU_SH3 + depends on CPU_SH4 default y help Selecting this option will enable support for SH processors that @@ -437,6 +201,209 @@ config CPU_HAS_PTEA endmenu +menu "Board support" + +config SOLUTION_ENGINE + bool + +config SH_SOLUTION_ENGINE + bool "SolutionEngine" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750 + help + Select SolutionEngine if configuring for a Hitachi SH7709 + or SH7750 evaluation board. + +config SH_7206_SOLUTION_ENGINE + bool "SolutionEngine7206" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7206 + help + Select 7206 SolutionEngine if configuring for a Hitachi SH7206 + evaluation board. + +config SH_7619_SOLUTION_ENGINE + bool "SolutionEngine7619" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7619 + help + Select 7619 SolutionEngine if configuring for a Hitachi SH7619 + evaluation board. + +config SH_7722_SOLUTION_ENGINE + bool "SolutionEngine7722" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7722 + help + Select 7722 SolutionEngine if configuring for a Hitachi SH772 + evaluation board. + +config SH_7751_SOLUTION_ENGINE + bool "SolutionEngine7751" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7751 + help + Select 7751 SolutionEngine if configuring for a Hitachi SH7751 + evaluation board. + +config SH_7780_SOLUTION_ENGINE + bool "SolutionEngine7780" + select SOLUTION_ENGINE + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7780 + help + Select 7780 SolutionEngine if configuring for a Renesas SH7780 + evaluation board. + +config SH_7300_SOLUTION_ENGINE + bool "SolutionEngine7300" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7300 + help + Select 7300 SolutionEngine if configuring for a Hitachi + SH7300(SH-Mobile V) evaluation board. + +config SH_7343_SOLUTION_ENGINE + bool "SolutionEngine7343" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7343 + help + Select 7343 SolutionEngine if configuring for a Hitachi + SH7343 (SH-Mobile 3AS) evaluation board. + +config SH_73180_SOLUTION_ENGINE + bool "SolutionEngine73180" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH73180 + help + Select 73180 SolutionEngine if configuring for a Hitachi + SH73180(SH-Mobile 3) evaluation board. + +config SH_7751_SYSTEMH + bool "SystemH7751R" + depends on CPU_SUBTYPE_SH7751R + help + Select SystemH if you are configuring for a Renesas SystemH + 7751R evaluation board. + +config SH_HP6XX + bool "HP6XX" + select SYS_SUPPORTS_APM_EMULATION + select HD6446X_SERIES + depends on CPU_SUBTYPE_SH7709 + help + Select HP6XX if configuring for a HP jornada HP6xx. + More information (hardware only) at + . + +config SH_DREAMCAST + bool "Dreamcast" + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7091 + help + Select Dreamcast if configuring for a SEGA Dreamcast. + More information at + . There is a + Dreamcast project is at . + +config SH_MPC1211 + bool "Interface MPC1211" + depends on CPU_SUBTYPE_SH7751 && BROKEN + help + CTP/PCI-SH02 is a CPU module computer that is produced + by Interface Corporation. + More information at + +config SH_SH03 + bool "Interface CTP/PCI-SH03" + depends on CPU_SUBTYPE_SH7751 && BROKEN + select SYS_SUPPORTS_PCI + help + CTP/PCI-SH03 is a CPU module computer that is produced + by Interface Corporation. + More information at + +config SH_SECUREEDGE5410 + bool "SecureEdge5410" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + Select SecureEdge5410 if configuring for a SnapGear SH board. + This includes both the OEM SecureEdge products as well as the + SME product line. + +config SH_HS7751RVOIP + bool "HS7751RVOIP" + depends on CPU_SUBTYPE_SH7751R + help + Select HS7751RVOIP if configuring for a Renesas Technology + Sales VoIP board. + +config SH_7710VOIPGW + bool "SH7710-VOIP-GW" + depends on CPU_SUBTYPE_SH7710 + help + Select this option to build a kernel for the SH7710 based + VOIP GW. + +config SH_RTS7751R2D + bool "RTS7751R2D" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + Select RTS7751R2D if configuring for a Renesas Technology + Sales SH-Graphics board. + +config SH_HIGHLANDER + bool "Highlander" + depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + +config SH_EDOSK7705 + bool "EDOSK7705" + depends on CPU_SUBTYPE_SH7705 + +config SH_SH4202_MICRODEV + bool "SH4-202 MicroDev" + depends on CPU_SUBTYPE_SH4_202 + help + Select SH4-202 MicroDev if configuring for a SuperH MicroDev board + with an SH4-202 CPU. + +config SH_LANDISK + bool "LANDISK" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + I-O DATA DEVICE, INC. "LANDISK Series" support. + +config SH_TITAN + bool "TITAN" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + Select Titan if you are configuring for a Nimble Microsystems + NetEngine NP51R. + +config SH_SHMIN + bool "SHMIN" + depends on CPU_SUBTYPE_SH7706 + help + Select SHMIN if configuring for the SHMIN board. + +config SH_LBOX_RE2 + bool "L-BOX RE2" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. + +endmenu + +source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" +source "arch/sh/boards/renesas/rts7751r2d/Kconfig" +source "arch/sh/boards/renesas/r7780rp/Kconfig" + menu "Timer and clock configuration" config SH_TMU @@ -473,13 +440,13 @@ config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343 default "31250000" if CPU_SUBTYPE_SH7619 + default "32000000" if CPU_SUBTYPE_SH7722 default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7206 - default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 || \ - CPU_SUBTYPE_SH7785 - default "60000000" if CPU_SUBTYPE_SH7751 + default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 + default "50000000" help This option is used to specify the peripheral clock frequency. This is necessary for determining the reference clock value on @@ -487,8 +454,10 @@ config SH_PCLK_FREQ config SH_CLK_MD int "CPU Mode Pin Setting" - default 0 depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 + default 6 if CPU_SUBTYPE_SH7206 + default 5 if CPU_SUBTYPE_SH7619 + default 0 help MD2 - MD0 pin setting. @@ -560,6 +529,7 @@ config CRASH_DUMP config SMP bool "Symmetric multi-processing support" + depends on SYS_SUPPORTS_SMP ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -584,6 +554,7 @@ config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP + default "4" if CPU_SHX3 default "2" help This allows you to specify the maximum number of CPUs which this @@ -623,6 +594,7 @@ config BOOT_LINK_OFFSET config UBC_WAKEUP bool "Wakeup UBC on startup" + depends on CPU_SH4 help Selecting this option will wakeup the User Break Controller (UBC) on startup. Although the UBC is left in an awake state when the processor @@ -651,8 +623,8 @@ menu "Bus options" # we're not using PCMCIA, so we make it dependent on # PCMCIA outright. -- PFM. config ISA - bool - default y if PCMCIA + def_bool y + depends on PCMCIA && HD6446X_SERIES help Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff @@ -690,6 +662,49 @@ config SUPERHYWAY tristate "SuperHyway Bus support" depends on CPU_SUBTYPE_SH4_202 +config CF_ENABLER + bool "Compact Flash Enabler support" + depends on SOLUTION_ENGINE || SH_SH03 + ---help--- + Compact Flash is a small, removable mass storage device introduced + in 1994 originally as a PCMCIA device. If you say `Y' here, you + compile in support for Compact Flash devices directly connected to + a SuperH processor. A Compact Flash FAQ is available at + . + + If your board has "Directly Connected" CompactFlash at area 5 or 6, + you may want to enable this option. Then, you can use CF as + primary IDE drive (only tested for SanDisk). + + If in doubt, select 'N'. + +choice + prompt "Compact Flash Connection Area" + depends on CF_ENABLER + default CF_AREA6 + +config CF_AREA5 + bool "Area5" + help + If your board has "Directly Connected" CompactFlash, You should + select the area where your CF is connected to. + + - "Area5" if CompactFlash is connected to Area 5 (0x14000000) + - "Area6" if it is connected to Area 6 (0x18000000) + + "Area6" will work for most boards. + +config CF_AREA6 + bool "Area6" + +endchoice + +config CF_BASE_ADDR + hex + depends on CF_ENABLER + default "0xb8000000" if CF_AREA6 + default "0xb4000000" if CF_AREA5 + source "arch/sh/drivers/pci/Kconfig" source "drivers/pci/Kconfig" @@ -707,7 +722,7 @@ source "fs/Kconfig.binfmt" endmenu menu "Power management options (EXPERIMENTAL)" -depends on EXPERIMENTAL +depends on EXPERIMENTAL && SYS_SUPPORTS_PM source kernel/power/Kconfig diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index b56307294b67..52f6a99c8ecc 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -52,6 +52,10 @@ config EARLY_PRINTK select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using the kernel command line option to toggle back and forth. +config DEBUG_BOOTMEM + depends on DEBUG_KERNEL + bool "Debug BOOTMEM initialization" + config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL @@ -82,6 +86,7 @@ config SH_KGDB bool "Include KGDB kernel debugger" select FRAME_POINTER select DEBUG_INFO + depends on CPU_SH3 || CPU_SH4 help Include in-kernel hooks for kgdb, the Linux kernel source level debugger. See for more information. diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 883b03b040c4..77fecc62a056 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -34,20 +34,20 @@ isa-y := $(isa-y)-nofpu endif endif -cflags-$(CONFIG_CPU_SH2) := -m2 -cflags-$(CONFIG_CPU_SH2A) := -m2a $(call cc-option,-m2a-nofpu,) -cflags-$(CONFIG_CPU_SH3) := -m3 -cflags-$(CONFIG_CPU_SH4) := -m4 \ +cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,) +cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \ + $(call cc-option,-m2a-nofpu,) +cflags-$(CONFIG_CPU_SH3) := $(call cc-option,-m3,) +cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \ $(call cc-option,-mno-implicit-fp,-m4-nofpu) -cflags-$(CONFIG_CPU_SH4A) := $(call cc-option,-m4a,) $(call cc-option,-m4a-nofpu,) +cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \ + $(call cc-option,-m4a-nofpu,) cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding -cflags-$(CONFIG_SH_DSP) += -Wa,-dsp - cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \ $(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g') @@ -87,39 +87,37 @@ core-y += arch/sh/kernel/ arch/sh/mm/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ # Boards -machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x -machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) := se/7722 -machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751 -machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) := se/7780 -machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300 -machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) := se/7343 -machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180 -machdir-$(CONFIG_SH_HP6XX) := hp6xx -machdir-$(CONFIG_SH_SATURN) := saturn -machdir-$(CONFIG_SH_DREAMCAST) := dreamcast -machdir-$(CONFIG_SH_MPC1211) := mpc1211 -machdir-$(CONFIG_SH_SH03) := sh03 -machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear -machdir-$(CONFIG_SH_HS7751RVOIP) := renesas/hs7751rvoip -machdir-$(CONFIG_SH_RTS7751R2D) := renesas/rts7751r2d -machdir-$(CONFIG_SH_7751_SYSTEMH) := renesas/systemh -machdir-$(CONFIG_SH_EDOSK7705) := renesas/edosk7705 -machdir-$(CONFIG_SH_HIGHLANDER) := renesas/r7780rp -machdir-$(CONFIG_SH_7710VOIPGW) := renesas/sh7710voipgw -machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev -machdir-$(CONFIG_SH_LANDISK) := landisk -machdir-$(CONFIG_SH_TITAN) := titan -machdir-$(CONFIG_SH_SHMIN) := shmin -machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) := se/7206 -machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) := se/7619 -machdir-$(CONFIG_SH_LBOX_RE2) := lboxre2 -machdir-$(CONFIG_SH_UNKNOWN) := unknown +machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x +machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722 +machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751 +machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780 +machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) += se/7300 +machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 +machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) += se/73180 +machdir-$(CONFIG_SH_HP6XX) += hp6xx +machdir-$(CONFIG_SH_DREAMCAST) += dreamcast +machdir-$(CONFIG_SH_MPC1211) += mpc1211 +machdir-$(CONFIG_SH_SH03) += sh03 +machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear +machdir-$(CONFIG_SH_HS7751RVOIP) += renesas/hs7751rvoip +machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d +machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh +machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 +machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp +machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw +machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev +machdir-$(CONFIG_SH_LANDISK) += landisk +machdir-$(CONFIG_SH_TITAN) += titan +machdir-$(CONFIG_SH_SHMIN) += shmin +machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206 +machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619 +machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2 -incdir-y := $(notdir $(machdir-y)) -incdir-$(CONFIG_SH_HP6XX) := hp6xx +incdir-y := $(notdir $(machdir-y)) ifneq ($(machdir-y),) -core-y += arch/sh/boards/$(machdir-y)/ +core-y += $(addprefix arch/sh/boards/, \ + $(filter-out ., $(patsubst %,%/,$(machdir-y)))) endif # Companion chips @@ -157,19 +155,31 @@ include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \ # Most boards have their own mach directories. For the ones that # don't, just reference the parent directory so the semantics are # kept roughly the same. +# +# When multiple boards are compiled in at the same time, preference +# for the mach link is given to whichever has a directory for its +# headers. However, this is only a workaround until platforms that +# can live in the same kernel image back away from relying on the +# mach link. include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \ include/config/auto.conf FORCE - @echo -n ' SYMLINK include/asm-sh/mach -> ' $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)if [ -d $(incdir-prefix)$(incdir-y) ]; then \ - echo -e 'include/asm-sh/$(incdir-y)'; \ - ln -fsn $(incdir-prefix)$(incdir-y) \ + $(Q)rm -f include/asm-sh/mach + $(Q)for i in $(incdir-y); do \ + if [ -d $(incdir-prefix)$$i ]; then \ + echo -n ' SYMLINK include/asm-sh/mach -> '; \ + echo -e "include/asm-sh/$$i"; \ + ln -fsn $(incdir-prefix)$$i \ include/asm-sh/mach; \ else \ - echo -e 'include/asm-sh'; \ - ln -fsn $(incdir-prefix) include/asm-sh/mach; \ - fi + if [ ! -d include/asm-sh/mach ]; then \ + echo -n ' SYMLINK include/asm-sh/mach -> '; \ + echo -e 'include/asm-sh'; \ + ln -fsn $(incdir-prefix) include/asm-sh/mach; \ + fi; \ + fi; \ + done @touch $@ archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools @@ -188,7 +198,9 @@ compressed: zImage archclean: $(Q)$(MAKE) $(clean)=$(boot) -CLEAN_FILES += include/asm-sh/machtypes.h +CLEAN_FILES += include/asm-sh/machtypes.h \ + include/asm-sh/cpu include/asm-sh/.cpu \ + include/asm-sh/mach include/asm-sh/.mach define archhelp @echo '* zImage - Compressed kernel image' diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c index f13017eeeb27..8799df6e866a 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/dreamcast/setup.c @@ -60,7 +60,7 @@ static void __init dreamcast_setup(char **cmdline_p) #endif } -struct sh_machine_vector mv_dreamcast __initmv = { +static struct sh_machine_vector mv_dreamcast __initmv = { .mv_name = "Sega Dreamcast", .mv_setup = dreamcast_setup, .mv_irq_demux = systemasic_irq_demux, @@ -70,4 +70,3 @@ struct sh_machine_vector mv_dreamcast __initmv = { .mv_consistent_free = dreamcast_consistent_free, #endif }; -ALIAS_MV(dreamcast) diff --git a/arch/sh/boards/hp6xx/mach.c b/arch/sh/boards/hp6xx/mach.c deleted file mode 100644 index 08dbba910f74..000000000000 --- a/arch/sh/boards/hp6xx/mach.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/arch/sh/boards/hp6xx/mach.c - * - * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the HP680 - */ -#include -#include -#include -#include - -struct sh_machine_vector mv_hp6xx __initmv = { - .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM, - - .mv_inb = hd64461_inb, - .mv_inw = hd64461_inw, - .mv_inl = hd64461_inl, - .mv_outb = hd64461_outb, - .mv_outw = hd64461_outw, - .mv_outl = hd64461_outl, - - .mv_inb_p = hd64461_inb_p, - .mv_inw_p = hd64461_inw, - .mv_inl_p = hd64461_inl, - .mv_outb_p = hd64461_outb_p, - .mv_outw_p = hd64461_outw, - .mv_outl_p = hd64461_outl, - - .mv_insb = hd64461_insb, - .mv_insw = hd64461_insw, - .mv_insl = hd64461_insl, - .mv_outsb = hd64461_outsb, - .mv_outsw = hd64461_outsw, - .mv_outsl = hd64461_outsl, - - .mv_readw = hd64461_readw, - .mv_writew = hd64461_writew, - - .mv_irq_demux = hd64461_irq_demux, -}; - -ALIAS_MV(hp6xx) diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c index 6aeee85c9785..7ae708930bac 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -98,10 +98,9 @@ static void __init hp6xx_setup(char **cmdline_p) } device_initcall(hp6xx_devices_setup); -struct sh_machine_vector mv_hp6xx __initmv = { +static struct sh_machine_vector mv_hp6xx __initmv = { .mv_name = "hp6xx", .mv_setup = hp6xx_setup, .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM, .mv_irq_demux = hd64461_irq_demux, }; -ALIAS_MV(hp6xx) diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c index f953c7427769..eda71763ecc5 100644 --- a/arch/sh/boards/landisk/setup.c +++ b/arch/sh/boards/landisk/setup.c @@ -97,10 +97,9 @@ static void __init landisk_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_landisk __initmv = { +static struct sh_machine_vector mv_landisk __initmv = { .mv_name = "LANDISK", .mv_nr_irqs = 72, .mv_setup = landisk_setup, .mv_init_irq = init_landisk_IRQ, }; -ALIAS_MV(landisk) diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/lboxre2/setup.c index 4e20f7c63bf3..9c830fdc411b 100644 --- a/arch/sh/boards/lboxre2/setup.c +++ b/arch/sh/boards/lboxre2/setup.c @@ -77,9 +77,8 @@ device_initcall(lboxre2_devices_setup); /* * The Machine Vector */ -struct sh_machine_vector mv_lboxre2 __initmv = { +static struct sh_machine_vector mv_lboxre2 __initmv = { .mv_name = "L-BOX RE2", .mv_nr_irqs = 72, .mv_init_irq = init_lboxre2_IRQ, }; -ALIAS_MV(lboxre2) diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c index 1a0604b23ce0..8ce03e00b0ae 100644 --- a/arch/sh/boards/mpc1211/setup.c +++ b/arch/sh/boards/mpc1211/setup.c @@ -338,11 +338,10 @@ static void __init mpc1211_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_mpc1211 __initmv = { +static struct sh_machine_vector mv_mpc1211 __initmv = { .mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)", .mv_setup = mpc1211_setup, .mv_nr_irqs = 48, .mv_irq_demux = mpc1211_irq_demux, .mv_init_irq = init_mpc1211_IRQ, }; -ALIAS_MV(mpc1211) diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/renesas/edosk7705/setup.c index ec5be0107719..f076c45308dd 100644 --- a/arch/sh/boards/renesas/edosk7705/setup.c +++ b/arch/sh/boards/renesas/edosk7705/setup.c @@ -21,7 +21,7 @@ static void __init sh_edosk7705_init_irq(void) /* * The Machine Vector */ -struct sh_machine_vector mv_edosk7705 __initmv = { +static struct sh_machine_vector mv_edosk7705 __initmv = { .mv_name = "EDOSK7705", .mv_nr_irqs = 80, @@ -41,4 +41,3 @@ struct sh_machine_vector mv_edosk7705 __initmv = { .mv_isa_port2addr = sh_edosk7705_isa_port2addr, .mv_init_irq = sh_edosk7705_init_irq, }; -ALIAS_MV(edosk7705) diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c index f7d0e304d899..fa5fa3920222 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/setup.c +++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c @@ -89,7 +89,7 @@ static void __init hs7751rvoip_setup(char **cmdline_p) printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n"); } -struct sh_machine_vector mv_hs7751rvoip __initmv = { +static struct sh_machine_vector mv_hs7751rvoip __initmv = { .mv_name = "HS7751RVoIP", .mv_setup = hs7751rvoip_setup, .mv_nr_irqs = 72, @@ -118,4 +118,3 @@ struct sh_machine_vector mv_hs7751rvoip __initmv = { .mv_init_irq = hs7751rvoip_init_irq, .mv_ioport_map = hs7751rvoip_ioport_map, }; -ALIAS_MV(hs7751rvoip) diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig index 9fb11641fe13..fc8f28e04ba3 100644 --- a/arch/sh/boards/renesas/r7780rp/Kconfig +++ b/arch/sh/boards/renesas/r7780rp/Kconfig @@ -6,18 +6,18 @@ choice config SH_R7780RP bool "R7780RP-1 board support" - select CPU_SUBTYPE_SH7780 + depends on CPU_SUBTYPE_SH7780 config SH_R7780MP bool "R7780MP board support" - select CPU_SUBTYPE_SH7780 + depends on CPU_SUBTYPE_SH7780 help Selecting this option will enable support for the mass-production version of the R7780RP. If in doubt, say Y. config SH_R7785RP bool "R7785RP board support" - select CPU_SUBTYPE_SH7785 + depends on CPU_SUBTYPE_SH7785 endchoice diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index 0727ef92f2b3..5afb864a1ec5 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -166,10 +166,9 @@ static void __init highlander_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_highlander __initmv = { +static struct sh_machine_vector mv_highlander __initmv = { .mv_name = "Highlander", .mv_nr_irqs = 109, .mv_setup = highlander_setup, .mv_init_irq = highlander_init_irq, }; -ALIAS_MV(highlander) diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 593f26a85e9c..656fda30ef70 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -176,7 +176,7 @@ static void __init rts7751r2d_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_rts7751r2d __initmv = { +static struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_name = "RTS7751R2D", .mv_setup = rts7751r2d_setup, .mv_nr_irqs = 72, @@ -189,4 +189,3 @@ struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_consistent_free = voyagergx_consistent_free, #endif }; -ALIAS_MV(rts7751r2d) diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c index 180810b12107..2dce8bd97f90 100644 --- a/arch/sh/boards/renesas/sh7710voipgw/setup.c +++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c @@ -88,9 +88,8 @@ static void __init sh7710voipgw_init_irq(void) /* * The Machine Vector */ -struct sh_machine_vector mv_sh7710voipgw __initmv = { +static struct sh_machine_vector mv_sh7710voipgw __initmv = { .mv_name = "SH7710 VoIP Gateway", .mv_nr_irqs = 104, .mv_init_irq = sh7710voipgw_init_irq, }; -ALIAS_MV(sh7710voipgw) diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/renesas/systemh/setup.c index 936117659b74..ee78af842778 100644 --- a/arch/sh/boards/renesas/systemh/setup.c +++ b/arch/sh/boards/renesas/systemh/setup.c @@ -28,7 +28,7 @@ static void __init sh7751systemh_init_irq(void) make_systemh_irq(0xb); /* Ethernet interrupt */ } -struct sh_machine_vector mv_7751systemh __initmv = { +static struct sh_machine_vector mv_7751systemh __initmv = { .mv_name = "7751 SystemH", .mv_nr_irqs = 72, @@ -55,4 +55,3 @@ struct sh_machine_vector mv_7751systemh __initmv = { .mv_init_irq = sh7751systemh_init_irq, }; -ALIAS_MV(7751systemh) diff --git a/arch/sh/boards/saturn/Makefile b/arch/sh/boards/saturn/Makefile deleted file mode 100644 index 75a3042e252e..000000000000 --- a/arch/sh/boards/saturn/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the Sega Saturn specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - -obj-$(CONFIG_SMP) += smp.o - diff --git a/arch/sh/boards/saturn/io.c b/arch/sh/boards/saturn/io.c deleted file mode 100644 index c6e4f7f2e686..000000000000 --- a/arch/sh/boards/saturn/io.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/sh/boards/saturn/io.c - * - * I/O routines for the Sega Saturn. - * - * Copyright (C) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - */ -#include -#include - -unsigned long saturn_isa_port2addr(unsigned long offset) -{ - return offset; -} - -void *saturn_ioremap(unsigned long offset, unsigned long size) -{ - return (void *)offset; -} - -void saturn_iounmap(void *addr) -{ -} - diff --git a/arch/sh/boards/saturn/irq.c b/arch/sh/boards/saturn/irq.c deleted file mode 100644 index 15d1d3f0f787..000000000000 --- a/arch/sh/boards/saturn/irq.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * arch/sh/boards/saturn/irq.c - * - * Copyright (C) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - */ -#include -#include -#include -#include -#include - -/* - * Interrupts map out as follows: - * - * Vector Name Mask - * - * 64 VBLANKIN 0x0001 - * 65 VBLANKOUT 0x0002 - * 66 HBLANKIN 0x0004 - * 67 TIMER0 0x0008 - * 68 TIMER1 0x0010 - * 69 DSPEND 0x0020 - * 70 SOUNDREQUEST 0x0040 - * 71 SYSTEMMANAGER 0x0080 - * 72 PAD 0x0100 - * 73 LEVEL2DMAEND 0x0200 - * 74 LEVEL1DMAEND 0x0400 - * 75 LEVEL0DMAEND 0x0800 - * 76 DMAILLEGAL 0x1000 - * 77 SRITEDRAWEND 0x2000 - * 78 ABUS 0x8000 - * - */ -#define SATURN_IRQ_MIN 64 /* VBLANKIN */ -#define SATURN_IRQ_MAX 78 /* ABUS */ - -#define SATURN_IRQ_MASK 0xbfff - -static inline u32 saturn_irq_mask(unsigned int irq_nr) -{ - u32 mask; - - mask = (1 << (irq_nr - SATURN_IRQ_MIN)); - mask <<= (irq_nr == SATURN_IRQ_MAX); - mask &= SATURN_IRQ_MASK; - - return mask; -} - -static inline void mask_saturn_irq(unsigned int irq_nr) -{ - u32 mask; - - mask = ctrl_inl(SATURN_IMR); - mask |= saturn_irq_mask(irq_nr); - ctrl_outl(mask, SATURN_IMR); -} - -static inline void unmask_saturn_irq(unsigned int irq_nr) -{ - u32 mask; - - mask = ctrl_inl(SATURN_IMR); - mask &= ~saturn_irq_mask(irq_nr); - ctrl_outl(mask, SATURN_IMR); -} - -static void disable_saturn_irq(unsigned int irq_nr) -{ - mask_saturn_irq(irq_nr); -} - -static void enable_saturn_irq(unsigned int irq_nr) -{ - unmask_saturn_irq(irq_nr); -} - -static void mask_and_ack_saturn_irq(unsigned int irq_nr) -{ - mask_saturn_irq(irq_nr); -} - -static void end_saturn_irq(unsigned int irq_nr) -{ - if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - unmask_saturn_irq(irq_nr); -} - -static unsigned int startup_saturn_irq(unsigned int irq_nr) -{ - unmask_saturn_irq(irq_nr); - - return 0; -} - -static void shutdown_saturn_irq(unsigned int irq_nr) -{ - mask_saturn_irq(irq_nr); -} - -static struct hw_interrupt_type saturn_int = { - .typename = "Saturn", - .enable = enable_saturn_irq, - .disable = disable_saturn_irq, - .ack = mask_and_ack_saturn_irq, - .end = end_saturn_irq, - .startup = startup_saturn_irq, - .shutdown = shutdown_saturn_irq, -}; - -int saturn_irq_demux(int irq_nr) -{ - /* FIXME */ - return irq_nr; -} - diff --git a/arch/sh/boards/saturn/setup.c b/arch/sh/boards/saturn/setup.c deleted file mode 100644 index a3a37c9aad2e..000000000000 --- a/arch/sh/boards/saturn/setup.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/sh/boards/saturn/setup.c - * - * Hardware support for the Sega Saturn. - * - * Copyright (c) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - */ -#include -#include -#include -#include -#include - -extern int saturn_irq_demux(int irq_nr); - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_saturn __initmv = { - .mv_name = "Sega Saturn", - .mv_nr_irqs = 80, /* Fix this later */ - - .mv_isa_port2addr = saturn_isa_port2addr, - .mv_irq_demux = saturn_irq_demux, - - .mv_ioremap = saturn_ioremap, - .mv_iounmap = saturn_iounmap, -}; -ALIAS_MV(saturn) diff --git a/arch/sh/boards/saturn/smp.c b/arch/sh/boards/saturn/smp.c deleted file mode 100644 index 76460918c9cd..000000000000 --- a/arch/sh/boards/saturn/smp.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/sh/boards/saturn/smp.c - * - * SMP support for the Sega Saturn. - * - * Copyright (c) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - */ -#include -#include -#include - -#include - -extern void start_secondary(void); - -void __smp_send_ipi(unsigned int cpu, unsigned int action) -{ - /* Nothing here yet .. */ -} - -unsigned int __smp_probe_cpus(void) -{ - /* - * This is just a straightforward master/slave configuration, - * and probing isn't really supported.. - */ - return 2; -} - -/* - * We're only allowed to do byte-access to SMPC registers. In - * addition to which, we treat them as write-only, since - * reading from them will return undefined data. - */ -static inline void smpc_slave_stop(unsigned int cpu) -{ - smpc_barrier(); - ctrl_outb(1, SMPC_STATUS); - - ctrl_outb(SMPC_CMD_SSHOFF, SMPC_COMMAND); - smpc_barrier(); -} - -static inline void smpc_slave_start(unsigned int cpu) -{ - ctrl_outb(1, SMPC_STATUS); - ctrl_outb(SMPC_CMD_SSHON, SMPC_COMMAND); - - smpc_barrier(); -} - -void __smp_slave_init(unsigned int cpu) -{ - register unsigned long vbr; - void **entry; - - __asm__ __volatile__ ("stc vbr, %0\n\t" : "=r" (vbr)); - entry = (void **)(vbr + 0x310 + 0x94); - - smpc_slave_stop(cpu); - - *(void **)entry = (void *)start_secondary; - - smpc_slave_start(cpu); -} - diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c index ca714879f559..a074b62505ef 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/se/7206/setup.c @@ -70,7 +70,7 @@ __initcall(se7206_devices_setup); * The Machine Vector */ -struct sh_machine_vector mv_se __initmv = { +static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_nr_irqs = 256, .mv_inb = se7206_inb, @@ -96,4 +96,3 @@ struct sh_machine_vector mv_se __initmv = { .mv_init_irq = init_se7206_IRQ, }; -ALIAS_MV(se) diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c index f1960956bad0..eb469f5b6e97 100644 --- a/arch/sh/boards/se/7300/setup.c +++ b/arch/sh/boards/se/7300/setup.c @@ -46,7 +46,7 @@ __initcall(se7300_devices_setup); /* * The Machine Vector */ -struct sh_machine_vector mv_7300se __initmv = { +static struct sh_machine_vector mv_7300se __initmv = { .mv_name = "SolutionEngine 7300", .mv_nr_irqs = 109, .mv_inb = sh7300se_inb, @@ -72,4 +72,3 @@ struct sh_machine_vector mv_7300se __initmv = { .mv_init_irq = init_7300se_IRQ, }; -ALIAS_MV(7300se) diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c index e143017c8975..1deee8556642 100644 --- a/arch/sh/boards/se/73180/setup.c +++ b/arch/sh/boards/se/73180/setup.c @@ -46,7 +46,7 @@ __initcall(se73180_devices_setup); /* * The Machine Vector */ -struct sh_machine_vector mv_73180se __initmv = { +static struct sh_machine_vector mv_73180se __initmv = { .mv_name = "SolutionEngine 73180", .mv_nr_irqs = 108, .mv_inb = sh73180se_inb, @@ -73,4 +73,3 @@ struct sh_machine_vector mv_73180se __initmv = { .mv_init_irq = init_73180se_IRQ, .mv_irq_demux = shmse_irq_demux, }; -ALIAS_MV(73180se) diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index 3fdb16f2cef1..8fec155e2ff7 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -64,7 +64,7 @@ static void __init sh7343se_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_7343se __initmv = { +static struct sh_machine_vector mv_7343se __initmv = { .mv_name = "SolutionEngine 7343", .mv_setup = sh7343se_setup, .mv_nr_irqs = 108, @@ -92,4 +92,3 @@ struct sh_machine_vector mv_7343se __initmv = { .mv_init_irq = init_7343se_IRQ, .mv_irq_demux = shmse_irq_demux, }; -ALIAS_MV(7343se) diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/se/7619/setup.c index 52d2c4d5d2fa..1d0ef7faa10d 100644 --- a/arch/sh/boards/se/7619/setup.c +++ b/arch/sh/boards/se/7619/setup.c @@ -15,8 +15,7 @@ * The Machine Vector */ -struct sh_machine_vector mv_se __initmv = { +static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_nr_irqs = 108, }; -ALIAS_MV(se) diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c index c8eccff77a04..cdb0807928a5 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/se/770x/irq.c @@ -15,46 +15,7 @@ #include #include -/* - * If the problem of make_ipr_irq is solved, - * this code will become unnecessary. :-) - */ -static void se770x_disable_ipr_irq(unsigned int irq) -{ - struct ipr_data *p = get_irq_chip_data(irq); - - ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); -} - -static void se770x_enable_ipr_irq(unsigned int irq) -{ - struct ipr_data *p = get_irq_chip_data(irq); - - ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); -} - -static struct irq_chip se770x_irq_chip = { - .name = "MS770xSE-FPGA", - .mask = se770x_disable_ipr_irq, - .unmask = se770x_enable_ipr_irq, - .mask_ack = se770x_disable_ipr_irq, -}; - -void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs) -{ - int i; - - for (i = 0; i < nr_irqs; i++) { - unsigned int irq = table[i].irq; - disable_irq_nosync(irq); - set_irq_chip_and_handler_name(irq, &se770x_irq_chip, - handle_level_irq, "level"); - set_irq_chip_data(irq, &table[i]); - se770x_enable_ipr_irq(irq); - } -} - -static struct ipr_data se770x_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* * Super I/O (Just mimic PC): * 1: keyboard @@ -68,46 +29,67 @@ static struct ipr_data se770x_ipr_map[] = { */ #if defined(CONFIG_CPU_SUBTYPE_SH7705) /* This is default value */ - { 13, 0, 8, 0x0f-13 ,BCR_ILCRA}, - { 5 , 0, 4, 0x0f- 5 ,BCR_ILCRA}, - { 10, 0, 0, 0x0f-10, BCR_ILCRB}, - { 7 , 0, 4, 0x0f- 7, BCR_ILCRC}, - { 3 , 0, 0, 0x0f- 3, BCR_ILCRC}, - { 1 , 0, 12, 0x0f- 1, BCR_ILCRD}, - { 12, 0, 4, 0x0f-12, BCR_ILCRD}, /* LAN */ - { 2 , 0, 8, 0x0f- 2, BCR_ILCRE}, /* PCIRQ2 */ - { 6 , 0, 4, 0x0f- 6, BCR_ILCRE}, /* PCIRQ1 */ - { 14, 0, 0, 0x0f-14, BCR_ILCRE}, /* PCIRQ0 */ - { 0 , 0, 12, 0x0f , BCR_ILCRF}, - { 4 , 0, 4, 0x0f- 4, BCR_ILCRF}, - { 8 , 0, 12, 0x0f- 8, BCR_ILCRG}, - { 9 , 0, 8, 0x0f- 9, BCR_ILCRG}, - { 11, 0, 4, 0x0f-11, BCR_ILCRG}, + { 13, 0, 8, 0x0f-13, }, + { 5 , 0, 4, 0x0f- 5, }, + { 10, 1, 0, 0x0f-10, }, + { 7 , 2, 4, 0x0f- 7, }, + { 3 , 2, 0, 0x0f- 3, }, + { 1 , 3, 12, 0x0f- 1, }, + { 12, 3, 4, 0x0f-12, }, /* LAN */ + { 2 , 4, 8, 0x0f- 2, }, /* PCIRQ2 */ + { 6 , 4, 4, 0x0f- 6, }, /* PCIRQ1 */ + { 14, 4, 0, 0x0f-14, }, /* PCIRQ0 */ + { 0 , 5, 12, 0x0f , }, + { 4 , 5, 4, 0x0f- 4, }, + { 8 , 6, 12, 0x0f- 8, }, + { 9 , 6, 8, 0x0f- 9, }, + { 11, 6, 4, 0x0f-11, }, #else - { 14, 0, 8, 0x0f-14 ,BCR_ILCRA}, - { 12, 0, 4, 0x0f-12 ,BCR_ILCRA}, - { 8, 0, 4, 0x0f- 8 ,BCR_ILCRB}, - { 6, 0, 12, 0x0f- 6 ,BCR_ILCRC}, - { 5, 0, 8, 0x0f- 5 ,BCR_ILCRC}, - { 4, 0, 4, 0x0f- 4 ,BCR_ILCRC}, - { 3, 0, 0, 0x0f- 3 ,BCR_ILCRC}, - { 1, 0, 12, 0x0f- 1 ,BCR_ILCRD}, + { 14, 0, 8, 0x0f-14, }, + { 12, 0, 4, 0x0f-12, }, + { 8, 1, 4, 0x0f- 8, }, + { 6, 2, 12, 0x0f- 6, }, + { 5, 2, 8, 0x0f- 5, }, + { 4, 2, 4, 0x0f- 4, }, + { 3, 2, 0, 0x0f- 3, }, + { 1, 3, 12, 0x0f- 1, }, #if defined(CONFIG_STNIC) /* ST NIC */ - { 10, 0, 4, 0x0f-10 ,BCR_ILCRD}, /* LAN */ + { 10, 3, 4, 0x0f-10, }, /* LAN */ #endif /* MRSHPC IRQs setting */ - { 0, 0, 12, 0x0f- 0 ,BCR_ILCRE}, /* PCIRQ3 */ - { 11, 0, 8, 0x0f-11 ,BCR_ILCRE}, /* PCIRQ2 */ - { 9, 0, 4, 0x0f- 9 ,BCR_ILCRE}, /* PCIRQ1 */ - { 7, 0, 0, 0x0f- 7 ,BCR_ILCRE}, /* PCIRQ0 */ + { 0, 4, 12, 0x0f- 0, }, /* PCIRQ3 */ + { 11, 4, 8, 0x0f-11, }, /* PCIRQ2 */ + { 9, 4, 4, 0x0f- 9, }, /* PCIRQ1 */ + { 7, 4, 0, 0x0f- 7, }, /* PCIRQ0 */ /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ /* NOTE: #2 and #13 are not used on PC */ - { 13, 0, 4, 0x0f-13 ,BCR_ILCRG}, /* SLOTIRQ2 */ - { 2, 0, 0, 0x0f- 2 ,BCR_ILCRG}, /* SLOTIRQ1 */ + { 13, 6, 4, 0x0f-13, }, /* SLOTIRQ2 */ + { 2, 6, 0, 0x0f- 2, }, /* SLOTIRQ1 */ #endif }; +static unsigned long ipr_offsets[] = { + BCR_ILCRA, + BCR_ILCRB, + BCR_ILCRC, + BCR_ILCRD, + BCR_ILCRE, + BCR_ILCRF, + BCR_ILCRG, +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + .chip = { + .name = "IPR-se770x", + }, +}; + /* * Initialize IRQ setting */ @@ -122,5 +104,5 @@ void __init init_se_IRQ(void) ctrl_outw(0, BCR_ILCRF); ctrl_outw(0, BCR_ILCRG); - make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 17a2631de3ba..2962da148f3f 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -122,7 +122,7 @@ device_initcall(se_devices_setup); /* * The Machine Vector */ -struct sh_machine_vector mv_se __initmv = { +static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_setup = smsc_setup, #if defined(CONFIG_CPU_SH4) @@ -160,4 +160,3 @@ struct sh_machine_vector mv_se __initmv = { .mv_init_irq = init_se_IRQ, }; -ALIAS_MV(se) diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/se/7722/irq.c index 099e5deb77f8..26cff0efda40 100644 --- a/arch/sh/boards/se/7722/irq.c +++ b/arch/sh/boards/se/7722/irq.c @@ -19,15 +19,24 @@ #define INTC_INTMSK0 0xFFD00044 #define INTC_INTMSKCLR0 0xFFD00064 +struct se7722_data { + unsigned char irq; + unsigned char ipr_idx; + unsigned char shift; + unsigned short priority; + unsigned long addr; +}; + + static void disable_se7722_irq(unsigned int irq) { - struct ipr_data *p = get_irq_chip_data(irq); + struct se7722_data *p = get_irq_chip_data(irq); ctrl_outw( ctrl_inw( p->addr ) | p->priority , p->addr ); } static void enable_se7722_irq(unsigned int irq) { - struct ipr_data *p = get_irq_chip_data(irq); + struct se7722_data *p = get_irq_chip_data(irq); ctrl_outw( ctrl_inw( p->addr ) & ~p->priority , p->addr ); } @@ -38,7 +47,7 @@ static struct irq_chip se7722_irq_chip __read_mostly = { .mask_ack = disable_se7722_irq, }; -static struct ipr_data ipr_irq_table[] = { +static struct se7722_data ipr_irq_table[] = { /* irq ,idx,sft, priority , addr */ { MRSHPC_IRQ0 , 0 , 0 , MRSHPC_BIT0 , IRQ01_MASK } , { MRSHPC_IRQ1 , 0 , 0 , MRSHPC_BIT1 , IRQ01_MASK } , diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index 636ca6c987e0..6cca6cbc8069 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -137,7 +137,7 @@ static void __init se7722_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_se7722 __initmv = { +static struct sh_machine_vector mv_se7722 __initmv = { .mv_name = "Solution Engine 7722" , .mv_setup = se7722_setup , .mv_nr_irqs = 109 , @@ -145,4 +145,3 @@ struct sh_machine_vector mv_se7722 __initmv = { .mv_irq_demux = se7722_irq_demux, }; -ALIAS_MV(se7722) diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c index e4c63a48296c..c3d12590e5db 100644 --- a/arch/sh/boards/se/7751/irq.c +++ b/arch/sh/boards/se/7751/irq.c @@ -14,44 +14,31 @@ #include #include -static struct ipr_data se7751_ipr_map[] = { - /* Leave old Solution Engine code in for reference. */ -#if defined(CONFIG_SH_SOLUTION_ENGINE) - /* - * Super I/O (Just mimic PC): - * 1: keyboard - * 3: serial 0 - * 4: serial 1 - * 5: printer - * 6: floppy - * 8: rtc - * 12: mouse - * 14: ide0 - */ - { 14, BCR_ILCRA, 2, 0x0f-14 }, - { 12, BCR_ILCRA, 1, 0x0f-12 }, - { 8, BCR_ILCRB, 1, 0x0f- 8 }, - { 6, BCR_ILCRC, 3, 0x0f- 6 }, - { 5, BCR_ILCRC, 2, 0x0f- 5 }, - { 4, BCR_ILCRC, 1, 0x0f- 4 }, - { 3, BCR_ILCRC, 0, 0x0f- 3 }, - { 1, BCR_ILCRD, 3, 0x0f- 1 }, - - { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */ - - { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */ - { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */ - { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */ - { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */ - - /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ - /* NOTE: #2 and #13 are not used on PC */ - { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */ - { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */ -#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE) - { 13, BCR_ILCRD, 3, 2 }, +static struct ipr_data ipr_irq_table[] = { + { 13, 3, 3, 2 }, /* Add additional entries here as drivers are added and tested. */ -#endif +}; + +static unsigned long ipr_offsets[] = { + BCR_ILCRA, + BCR_ILCRB, + BCR_ILCRC, + BCR_ILCRD, + BCR_ILCRE, + BCR_ILCRF, + BCR_ILCRG, +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-se7751", + }, }; /* @@ -59,5 +46,5 @@ static struct ipr_data se7751_ipr_map[] = { */ void __init init_7751se_IRQ(void) { - make_ipr_irq(se7751_ipr_map, ARRAY_SIZE(se7751_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c index 52c7bfa57c2c..7873d07e40c1 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/se/7751/setup.c @@ -48,7 +48,7 @@ __initcall(se7751_devices_setup); /* * The Machine Vector */ -struct sh_machine_vector mv_7751se __initmv = { +static struct sh_machine_vector mv_7751se __initmv = { .mv_name = "7751 SolutionEngine", .mv_nr_irqs = 72, @@ -71,4 +71,3 @@ struct sh_machine_vector mv_7751se __initmv = { .mv_init_irq = init_7751se_IRQ, }; -ALIAS_MV(7751se) diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c index 3d0625c2d07b..874914746009 100644 --- a/arch/sh/boards/se/7780/irq.c +++ b/arch/sh/boards/se/7780/irq.c @@ -16,28 +16,6 @@ #include #include -#define INTC_INTMSK0 0xFFD00044 -#define INTC_INTMSKCLR0 0xFFD00064 - -static void disable_se7780_irq(unsigned int irq) -{ - struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, INTC_INTMSK0 + p->msk_offset); -} - -static void enable_se7780_irq(unsigned int irq) -{ - struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, INTC_INTMSKCLR0 + p->msk_offset); -} - -static struct irq_chip se7780_irq_chip __read_mostly = { - .name = "SE7780", - .mask = disable_se7780_irq, - .unmask = enable_se7780_irq, - .mask_ack = disable_se7780_irq, -}; - static struct intc2_data intc2_irq_table[] = { { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */ { 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */ @@ -51,13 +29,24 @@ static struct intc2_data intc2_irq_table[] = { { 0 , 0, 24, 0, 24, 3 }, /* SM501 */ }; +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0, /* N/A */ + .msk_base = 0xffd00044, + .mskclr_base = 0xffd00064, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-se7780", + }, +}; + /* * Initialize IRQ setting */ void __init init_se7780_IRQ(void) { - int i ; - /* enable all interrupt at FPGA */ ctrl_outw(0, FPGA_INTMSK1); /* mask SM501 interrupt */ @@ -79,11 +68,5 @@ void __init init_se7780_IRQ(void) /* FPGA + 0x0A */ ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); - for (i = 0; i < ARRAY_SIZE(intc2_irq_table); i++) { - disable_irq_nosync(intc2_irq_table[i].irq); - set_irq_chip_and_handler_name( intc2_irq_table[i].irq, &se7780_irq_chip, - handle_level_irq, "level"); - set_irq_chip_data( intc2_irq_table[i].irq, &intc2_irq_table[i] ); - disable_se7780_irq(intc2_irq_table[i].irq); - } + register_intc2_controller(&intc2_irq_desc); } diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c index df7d08a24c9f..723f2fd4d55b 100644 --- a/arch/sh/boards/se/7780/setup.c +++ b/arch/sh/boards/se/7780/setup.c @@ -113,10 +113,9 @@ static void __init se7780_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_se7780 __initmv = { +static struct sh_machine_vector mv_se7780 __initmv = { .mv_name = "Solution Engine 7780" , .mv_setup = se7780_setup , .mv_nr_irqs = 111 , .mv_init_irq = init_se7780_IRQ, }; -ALIAS_MV(se7780) diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index c069c444b4ec..9c031a8c0a1c 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -15,17 +15,33 @@ #include #include -static struct ipr_data sh03_ipr_map[] = { - { IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY }, - { IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY }, - { IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY }, - { IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY }, +static struct ipr_data ipr_irq_table[] = { + { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY }, + { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY }, + { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY }, + { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY }, +}; + +static unsigned long ipr_offsets[] = { + INTC_IPRD, +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh03", + }, }; static void __init init_sh03_IRQ(void) { ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - make_ipr_irq(sh03_ipr_map, ARRAY_SIZE(sh03_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } extern void *cf_io_base; @@ -74,11 +90,10 @@ static int __init sh03_devices_setup(void) } __initcall(sh03_devices_setup); -struct sh_machine_vector mv_sh03 __initmv = { +static struct sh_machine_vector mv_sh03 __initmv = { .mv_name = "Interface (CTP/PCI-SH03)", .mv_setup = sh03_setup, .mv_nr_irqs = 48, .mv_ioport_map = sh03_ioport_map, .mv_init_irq = init_sh03_IRQ, }; -ALIAS_MV(sh03) diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index 4a9df4a6b034..dfd124509f42 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -6,28 +6,44 @@ * SHMIN Support. */ #include +#include #include #include #include -#include #include #define PFC_PHCR 0xa400010eUL #define INTC_ICR1 0xa4000010UL #define INTC_IPRC 0xa4000016UL -static struct ipr_data shmin_ipr_map[] = { - { .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 }, - { .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 }, - { .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 }, - { .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 }, +static struct ipr_data ipr_irq_table[] = { + { 32, 0, 0, 0 }, + { 33, 0, 4, 0 }, + { 34, 0, 8, 8 }, + { 35, 0, 12, 0 }, +}; + +static unsigned long ipr_offsets[] = { + INTC_IPRC, +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-shmin", + }, }; static void __init init_shmin_irq(void) { ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. - make_ipr_irq(shmin_ipr_map, ARRAY_SIZE(shmin_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size) @@ -43,9 +59,8 @@ static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size) } -struct sh_machine_vector mv_shmin __initmv = { +static struct sh_machine_vector mv_shmin __initmv = { .mv_name = "SHMIN", .mv_init_irq = init_shmin_irq, .mv_ioport_map = shmin_ioport_map, }; -ALIAS_MV(shmin) diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index 650fb3645947..84271d85a8dd 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -68,11 +68,27 @@ module_init(eraseconfig_init); * IRL3 = crypto */ -static struct ipr_data snapgear_ipr_map[] = { - make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); - make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); - make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); - make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); +static struct ipr_data ipr_irq_table[] = { + { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY }, + { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY }, + { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY }, + { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY }, +}; + +static unsigned long ipr_offsets[] = { + INTC_IPRD, +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-snapgear", + }, }; static void __init init_snapgear_IRQ(void) @@ -82,7 +98,7 @@ static void __init init_snapgear_IRQ(void) printk("Setup SnapGear IRQ/IPR ...\n"); - make_ipr_irq(snapgear_ipr_map, ARRAY_SIZE(snapgear_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } /* @@ -96,7 +112,7 @@ static void __init snapgear_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_snapgear __initmv = { +static struct sh_machine_vector mv_snapgear __initmv = { .mv_name = "SnapGear SecureEdge5410", .mv_setup = snapgear_setup, .mv_nr_irqs = 72, @@ -117,4 +133,3 @@ struct sh_machine_vector mv_snapgear __initmv = { .mv_init_irq = init_snapgear_IRQ, }; -ALIAS_MV(snapgear) diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c index 6396cea1c896..fc8cd06d66cf 100644 --- a/arch/sh/boards/superh/microdev/setup.c +++ b/arch/sh/boards/superh/microdev/setup.c @@ -371,7 +371,7 @@ static void __init microdev_setup(char **cmdline_p) /* * The Machine Vector */ -struct sh_machine_vector mv_sh4202_microdev __initmv = { +static struct sh_machine_vector mv_sh4202_microdev __initmv = { .mv_name = "SH4-202 MicroDev", .mv_setup = microdev_setup, .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */ @@ -403,4 +403,3 @@ struct sh_machine_vector mv_sh4202_microdev __initmv = { .mv_heartbeat = microdev_heartbeat, #endif }; -ALIAS_MV(sh4202_microdev) diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c index 6bcd939bfaed..606d25a4b870 100644 --- a/arch/sh/boards/titan/setup.c +++ b/arch/sh/boards/titan/setup.c @@ -12,7 +12,7 @@ #include #include -static struct ipr_data titan_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR idx, shift, prio */ { TITAN_IRQ_WAN, 3, 12, 8 }, /* eth0 (WAN) */ { TITAN_IRQ_LAN, 3, 8, 8 }, /* eth1 (LAN) */ @@ -20,15 +20,33 @@ static struct ipr_data titan_ipr_map[] = { { TITAN_IRQ_USB, 3, 0, 8 }, /* mPCI B (bottom), USB */ }; +static unsigned long ipr_offsets[] = { /* stolen from setup-sh7750.c */ + 0xffd00004UL, /* 0: IPRA */ + 0xffd00008UL, /* 1: IPRB */ + 0xffd0000cUL, /* 2: IPRC */ + 0xffd00010UL, /* 3: IPRD */ +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-titan", + }, +}; static void __init init_titan_irq(void) { /* enable individual interrupt mode for externals */ ipr_irq_enable_irlm(); /* register ipr irqs */ - make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } -struct sh_machine_vector mv_titan __initmv = { +static struct sh_machine_vector mv_titan __initmv = { .mv_name = "Titan", .mv_inb = titan_inb, @@ -52,4 +70,3 @@ struct sh_machine_vector mv_titan __initmv = { .mv_init_irq = init_titan_irq, }; -ALIAS_MV(titan) diff --git a/arch/sh/boards/unknown/Makefile b/arch/sh/boards/unknown/Makefile deleted file mode 100644 index 7d18f408b0c5..000000000000 --- a/arch/sh/boards/unknown/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for unknown SH boards -# - -obj-y := setup.o - diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c deleted file mode 100644 index bee4612de59b..000000000000 --- a/arch/sh/boards/unknown/setup.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/arch/sh/boards/unknown/setup.c - * - * Copyright (C) 2002 Paul Mundt - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Setup code for an unknown machine (internal peripherals only) - * - * This is the simplest of all boards, and serves only as a quick and dirty - * method to start debugging a new board during bring-up until proper board - * setup code is written. - */ -#include -#include - -struct sh_machine_vector mv_unknown __initmv = { - .mv_name = "Unknown", -}; -ALIAS_MV(unknown) diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig index 0582ca8346b6..2e516e9a6ede 100644 --- a/arch/sh/cchips/Kconfig +++ b/arch/sh/cchips/Kconfig @@ -13,10 +13,8 @@ config VOYAGERGX are additional GPIO bits that can be used to interface to external as well. -# A board must have defined HD6446X_SERIES in order to see these config HD6446X_SERIES - bool "HD6446x support" - default n + bool choice prompt "HD6446x options" @@ -25,7 +23,6 @@ choice config HD64461 bool "Hitachi HD64461 companion chip support" - depends on CPU_SUBTYPE_SH7709 ---help--- The Hitachi HD64461 provides an interface for the SH7709 CPU, supporting a LCD controller, @@ -40,7 +37,6 @@ config HD64461 config HD64465 bool "Hitachi HD64465 companion chip support" - depends on CPU_SUBTYPE_SH7750 ---help--- The Hitachi HD64465 provides an interface for the SH7750 CPU, supporting a LCD controller, diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index 8b6b5a779de8..3fdd270eecf7 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,15 +1,23 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 10:51:55 2006 +# Linux kernel version: 2.6.22-rc4 +# Sat Jul 7 03:47:45 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -28,6 +36,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set @@ -35,8 +44,10 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -50,14 +61,19 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -93,44 +109,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -CONFIG_SH_DREAMCAST=y -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set @@ -138,79 +119,93 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# -CONFIG_CPU_SUBTYPE_SH7750=y +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set CONFIG_CPU_SUBTYPE_SH7091=y -CONFIG_CPU_SUBTYPE_SH7750R=y +# CONFIG_CPU_SUBTYPE_SH7750R is not set # CONFIG_CPU_SUBTYPE_SH7750S is not set # CONFIG_CPU_SUBTYPE_SH7751 is not set # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set # CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y # CONFIG_SH_DSP is not set CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y # -# Timer support +# Board support +# +CONFIG_SH_DREAMCAST=y + +# +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=49876504 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set # # CPU Frequency scaling @@ -232,6 +227,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y # # DMA support # +CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_NR_ONCHIP_DMA_CHANNELS=4 CONFIG_NR_DMA_CHANNELS_BOOL=y @@ -240,17 +236,23 @@ CONFIG_NR_DMA_CHANNELS=9 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -269,32 +271,22 @@ CONFIG_CMDLINE="console=ttySC1,115200 panic=3" # Bus options # CONFIG_PCI=y -# CONFIG_SH_PCIDMA_NONCOHERENT is not set +CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -303,13 +295,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -327,30 +319,20 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -376,7 +358,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -394,10 +385,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set # @@ -408,6 +395,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -421,13 +409,16 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # -# ATA/ATAPI/MFM/RLL support +# Misc devices # +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -436,10 +427,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -455,6 +442,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # @@ -470,15 +458,7 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -521,47 +501,16 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_QLA3XXX is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set - -# -# Token Ring devices -# +# CONFIG_SC92031 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -604,17 +553,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -660,10 +611,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -680,14 +627,8 @@ CONFIG_SH_WDT=y # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -695,11 +636,7 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -711,44 +648,51 @@ CONFIG_HW_RANDOM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -763,13 +707,17 @@ CONFIG_FB_PVR2=y # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set # CONFIG_FB_VIRTUAL is not set # @@ -789,10 +737,6 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set @@ -800,13 +744,18 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -823,10 +772,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -874,10 +819,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -956,6 +903,11 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + # # Profiling support # @@ -965,17 +917,18 @@ CONFIG_PROFILING=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options @@ -991,8 +944,13 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig new file mode 100644 index 000000000000..17f7402b31d8 --- /dev/null +++ b/arch/sh/configs/r7780mp_defconfig @@ -0,0 +1,1223 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc4 +# Mon Jun 11 10:24:57 2007 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +CONFIG_CPU_SUBTYPE_SH7780=y +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +# CONFIG_32BIT is not set +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set +# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_DSP is not set +CONFIG_SH_STORE_QUEUES=y +CONFIG_SPECULATIVE_EXECUTION=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_INTC2_IRQ=y +CONFIG_CPU_HAS_SR_RB=y + +# +# Board support +# +# CONFIG_SH_7780_SOLUTION_ENGINE is not set +CONFIG_SH_HIGHLANDER=y +# CONFIG_SH_R7780RP is not set +CONFIG_SH_R7780MP=y +# CONFIG_SH_R7785RP is not set + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=32000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +CONFIG_PUSH_SWITCH=y + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_BLINK is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_PLATFORM=y + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=m +# CONFIG_PCNET32_NAPI is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_8139CP=m +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +CONFIG_8139TOO_8129=y +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +CONFIG_VIA_RHINE=m +CONFIG_VIA_RHINE_MMIO=y +# CONFIG_VIA_RHINE_NAPI is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=m +# CONFIG_OSS_OBSOLETE is not set +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_FRAME_POINTER is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 0f5ec649daf8..5c29338532da 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc3 -# Mon Mar 12 14:26:33 2007 +# Linux kernel version: 2.6.22-rc4 +# Thu Jul 12 12:33:15 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -11,7 +11,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -43,6 +45,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set @@ -60,13 +63,18 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -102,55 +110,11 @@ CONFIG_DEFAULT_IOSCHED="noop" # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -CONFIG_SH_HIGHLANDER=y -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_UNKNOWN is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_R7780MP is not set -CONFIG_SH_R7785RP=y - -# -# Processor selection -# CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SHX2=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set @@ -158,10 +122,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -170,23 +131,12 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set CONFIG_CPU_SUBTYPE_SH7785=y - -# -# SH4AL-DSP Processor Support -# +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set @@ -194,6 +144,7 @@ CONFIG_CPU_SUBTYPE_SH7785=y # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 @@ -201,6 +152,12 @@ CONFIG_MEMORY_SIZE=0x08000000 CONFIG_32BIT=y # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -215,17 +172,17 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set # CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set # # Processor features @@ -240,13 +197,23 @@ CONFIG_CPU_HAS_INTC2_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +# +# Board support +# +CONFIG_SH_HIGHLANDER=y +# CONFIG_SH_R7780RP is not set +# CONFIG_SH_R7780MP is not set +CONFIG_SH_R7785RP=y + # # Timer and clock configuration # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=28 -CONFIG_NO_IDLE_HZ=y CONFIG_SH_PCLK_FREQ=50000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set # # CPU Frequency scaling @@ -261,7 +228,6 @@ CONFIG_SH_PCLK_FREQ=50000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers @@ -278,7 +244,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_KEXEC=y -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -300,30 +266,21 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -332,7 +289,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -377,20 +333,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_BRIDGE=m @@ -417,8 +361,16 @@ CONFIG_LLC=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -438,10 +390,6 @@ CONFIG_FW_LOADER=m # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set # @@ -475,12 +423,10 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # +# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -509,6 +455,7 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -554,10 +501,6 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set @@ -580,6 +523,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -629,6 +573,7 @@ CONFIG_PATA_PLATFORM=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # @@ -644,15 +589,7 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -673,10 +610,7 @@ CONFIG_MII=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -689,55 +623,26 @@ CONFIG_R8169=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_MLX4_CORE is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -789,6 +694,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -831,14 +737,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set @@ -848,10 +748,7 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -864,16 +761,15 @@ CONFIG_HW_RANDOM=y # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -885,22 +781,30 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # # CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -908,7 +812,7 @@ CONFIG_FB=y # CONFIG_FB_TILEBLITTING is not set # -# Frambuffer hardware drivers +# Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set @@ -930,12 +834,11 @@ CONFIG_FB=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set # CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set # @@ -952,13 +855,10 @@ CONFIG_SOUND=m # Open Sound System # CONFIG_SOUND_PRIME=m -# CONFIG_OBSOLETE_OSS is not set -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ICH is not set +# CONFIG_OSS_OBSOLETE is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set # # HID Devices @@ -982,10 +882,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -1026,17 +922,29 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_SH=y -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + # # DMA Engine support # @@ -1050,14 +958,6 @@ CONFIG_RTC_DRV_SH=y # DMA Devices # -# -# Auxiliary Display support -# - -# -# Virtualization -# - # # File systems # @@ -1157,6 +1057,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1239,7 +1140,6 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1266,6 +1166,7 @@ CONFIG_FORCED_INLINING=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_4KSTACKS is not set @@ -1300,6 +1201,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -1328,7 +1230,9 @@ CONFIG_CRYPTO_DES=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 87ab9080fd1d..f2f2a3c9c32d 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,18 +1,22 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 6 14:40:15 2006 +# Linux kernel version: 2.6.22-rc4 +# Fri Jun 15 19:37:46 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -34,8 +38,10 @@ CONFIG_LOCALVERSION="" # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -48,12 +54,17 @@ CONFIG_BUG=y # CONFIG_ELF_CORE is not set # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SLAB=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 -# CONFIG_SLOB is not set # # Loadable module support @@ -83,53 +94,10 @@ CONFIG_DEFAULT_IOSCHED="noop" # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -CONFIG_SH_7206_SOLUTION_ENGINE=y -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH2=y CONFIG_CPU_SH2A=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# CONFIG_CPU_SUBTYPE_SH7206=y - -# -# SH-3 Processor Support -# # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set @@ -137,10 +105,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -149,32 +114,28 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -184,35 +145,42 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set # CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set # # Processor features # # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_SH_FPU is not set # CONFIG_SH_FPU_EMU is not set # CONFIG_SH_DSP is not set +CONFIG_CPU_HAS_IPR_IRQ=y # -# Timer support +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7206_SOLUTION_ENGINE=y + +# +# Timer and clock configuration # CONFIG_SH_CMT=y # CONFIG_SH_MTU2 is not set CONFIG_SH_TIMER_IRQ=140 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_MD=6 +# CONFIG_TICK_ONESHOT is not set # # CPU Frequency scaling @@ -227,11 +195,11 @@ CONFIG_SH_CLK_MD=6 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers # +# CONFIG_HEARTBEAT is not set # CONFIG_PUSH_SWITCH is not set # @@ -239,10 +207,11 @@ CONFIG_SH_CLK_MD=6 # CONFIG_HZ_100=y # CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -252,22 +221,17 @@ CONFIG_PREEMPT_NONE=y # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # # Bus options # -# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # -# -# PCI Hotplug Support -# - # # Executable file formats # @@ -276,11 +240,6 @@ CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -289,7 +248,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set # CONFIG_UNIX is not set # CONFIG_NET_KEY is not set @@ -314,25 +272,14 @@ CONFIG_IP_FIB_HASH=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -358,7 +305,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -375,10 +331,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y @@ -393,6 +345,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -424,7 +377,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -452,16 +404,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -471,6 +420,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -479,18 +429,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -499,10 +444,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -510,19 +451,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # # CONFIG_MD is not set -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - # # Network device support # @@ -531,10 +459,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -544,27 +468,14 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_STNIC is not set CONFIG_SMC91X=y +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -604,6 +515,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -639,29 +551,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -674,27 +572,30 @@ CONFIG_SERIAL_CORE_CONSOLE=y # Dallas's 1-wire bus # # CONFIG_W1 is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -702,6 +603,12 @@ CONFIG_SERIAL_CORE_CONSOLE=y # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -717,10 +624,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -802,7 +705,6 @@ CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -816,7 +718,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -848,6 +749,11 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + # # Profiling support # @@ -861,14 +767,11 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_UNWIND_INFO is not set # CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set # # Security options @@ -883,8 +786,13 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig index 20ac7f4c53fb..3a3c3c1f507d 100644 --- a/arch/sh/configs/se7619_defconfig +++ b/arch/sh/configs/se7619_defconfig @@ -1,18 +1,22 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 6 16:35:36 2006 +# Linux kernel version: 2.6.22-rc4 +# Fri Jun 15 19:43:06 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -31,8 +35,10 @@ CONFIG_LOCALVERSION="" # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_UTS_NS is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -45,12 +51,17 @@ CONFIG_BUG=y # CONFIG_ELF_CORE is not set # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SLAB=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 -# CONFIG_SLOB is not set # # Loadable module support @@ -80,52 +91,9 @@ CONFIG_DEFAULT_IOSCHED="noop" # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -CONFIG_SH_7619_SOLUTION_ENGINE=y -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH2=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set CONFIG_CPU_SUBTYPE_SH7619=y - -# -# SH-2A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set @@ -133,10 +101,7 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -145,32 +110,28 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -180,34 +141,41 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set CONFIG_SH_WRITETHROUGH=y -# CONFIG_SH_OCRAM is not set # # Processor features # # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_SH_FPU is not set # CONFIG_SH_FPU_EMU is not set # CONFIG_SH_DSP is not set +CONFIG_CPU_HAS_IPR_IRQ=y # -# Timer support +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7619_SOLUTION_ENGINE=y + +# +# Timer and clock configuration # CONFIG_SH_CMT=y CONFIG_SH_TIMER_IRQ=86 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=31250000 CONFIG_SH_CLK_MD=5 +# CONFIG_TICK_ONESHOT is not set # # CPU Frequency scaling @@ -222,11 +190,11 @@ CONFIG_SH_CLK_MD=5 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers # +# CONFIG_HEARTBEAT is not set # CONFIG_PUSH_SWITCH is not set # @@ -234,10 +202,11 @@ CONFIG_SH_CLK_MD=5 # CONFIG_HZ_100=y # CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -247,22 +216,17 @@ CONFIG_PREEMPT_NONE=y # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # # Bus options # -# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # -# -# PCI Hotplug Support -# - # # Executable file formats # @@ -271,11 +235,6 @@ CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -295,10 +254,6 @@ CONFIG_BINFMT_ZFLAT=y # # Connector - unified userspace <-> kernelspace linker # - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y @@ -313,6 +268,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -344,7 +300,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -372,16 +327,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -391,6 +343,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -398,17 +351,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # # Misc devices # -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -417,10 +365,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -428,19 +372,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_MD is not set -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - # # ISDN subsystem # @@ -471,6 +402,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -506,29 +438,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -541,26 +459,29 @@ CONFIG_SERIAL_CORE_CONSOLE=y # Dallas's 1-wire bus # # CONFIG_W1 is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# +CONFIG_DAB=y # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -568,6 +489,12 @@ CONFIG_SERIAL_CORE_CONSOLE=y # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -583,10 +510,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -668,7 +591,6 @@ CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -682,7 +604,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -715,14 +636,11 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_UNWIND_INFO is not set # CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set # # Security options @@ -737,8 +655,13 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig index ca4c663dfa37..764b813c4051 100644 --- a/arch/sh/configs/se7722_defconfig +++ b/arch/sh/configs/se7722_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc7 -# Fri Apr 27 16:30:30 2007 +# Linux kernel version: 2.6.22-rc4 +# Wed Jun 20 18:08:04 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -11,7 +11,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -43,6 +45,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -60,14 +63,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -103,57 +112,12 @@ CONFIG_DEFAULT_IOSCHED="noop" # # System type # -CONFIG_SOLUTION_ENGINE=y -# CONFIG_SH_SOLUTION_ENGINE is not set -CONFIG_SH_7722_SOLUTION_ENGINE=y -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7780_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_LBOX_RE2 is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SH4AL_DSP=y CONFIG_CPU_SHX2=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set @@ -162,10 +126,6 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set - -# -# SH-4 Processor Support -# # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -174,23 +134,11 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set CONFIG_CPU_SUBTYPE_SH7722=y @@ -198,15 +146,21 @@ CONFIG_CPU_SUBTYPE_SH7722=y # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 -# CONFIG_32BIT is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y -CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_NUMA=y +CONFIG_NODES_SHIFT=1 +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=2 CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -216,26 +170,25 @@ CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set # CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 # # Processor features @@ -251,13 +204,21 @@ CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7722_SOLUTION_ENGINE=y + # # Timer and clock configuration # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -CONFIG_NO_IDLE_HZ=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y # # CPU Frequency scaling @@ -272,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=33333333 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers @@ -290,7 +250,6 @@ CONFIG_HZ_250=y CONFIG_HZ=250 CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set -# CONFIG_SMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -307,29 +266,23 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -# CONFIG_PCI is not set +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -338,7 +291,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -375,20 +327,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -414,7 +354,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -432,10 +381,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set # @@ -464,10 +409,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -496,6 +438,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -511,10 +454,6 @@ CONFIG_BLK_DEV_SD=y # # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_PATA_PLATFORM=y @@ -524,19 +463,6 @@ CONFIG_PATA_PLATFORM=y # # CONFIG_MD is not set -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - # # Network device support # @@ -545,10 +471,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -558,27 +480,14 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_STNIC is not set CONFIG_SMC91X=y +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -627,6 +536,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -667,14 +577,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -682,10 +586,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -698,16 +598,15 @@ CONFIG_HW_RANDOM=y # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -719,16 +618,19 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support # # CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -757,10 +659,6 @@ CONFIG_HID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -800,17 +698,29 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_SH=y -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + # # DMA Engine support # @@ -824,14 +734,6 @@ CONFIG_RTC_DRV_SH=y # DMA Devices # -# -# Auxiliary Display support -# - -# -# Virtualization -# - # # File systems # @@ -937,23 +839,24 @@ CONFIG_MSDOS_PARTITION=y # # Profiling support # -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +# CONFIG_OPROFILE is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set +CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_EARLY_PRINTK is not set # CONFIG_SH_KGDB is not set # @@ -973,8 +876,10 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig new file mode 100644 index 000000000000..219bad558b10 --- /dev/null +++ b/arch/sh/configs/shx3_defconfig @@ -0,0 +1,756 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc4 +# Wed Jun 20 14:09:27 2007 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_UTS_NS is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX3=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +CONFIG_CPU_SUBTYPE_SHX3=y +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set +# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_SH_FPU is not set +# CONFIG_SH_FPU_EMU is not set +CONFIG_SH_DSP=y +CONFIG_SH_STORE_QUEUES=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_INTC2_IRQ=y +CONFIG_CPU_HAS_SR_RB=y + +# +# Board support +# + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 ip=192.168.1.2:::255.255.255.0 root=/dev/nfs nfsroot=192.168.1.1:/exports/devel/rfs/mobiler noaliencache earlyprintk=bios ignore_loglevel" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_PATA_PLATFORM=y + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# ISDN subsystem +# + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +# CONFIG_HID is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +# CONFIG_OPROFILE is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_SLAB_LEAK=y +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +# CONFIG_PROVE_LOCKING is not set +CONFIG_LOCKDEP=y +CONFIG_DEBUG_LOCKDEP=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_4KSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index 99935f9daf4b..333898077c7c 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -36,23 +36,6 @@ config NR_DMA_CHANNELS support. Setting this to a higher value allows for cascading DMACs with additional channels. -config DMA_PAGE_OPS - bool "Use DMAC for page copy/clear" - depends on SH_DMA && BROKEN - help - Selecting this option will use a dual-address mode configured channel - in the SH DMAC for copy_page()/clear_page(). Primarily a performance - hack. - -config DMA_PAGE_OPS_CHANNEL - depends on DMA_PAGE_OPS - int "DMA channel for sh memory-manager page copy/clear" - default "3" - help - This allows the specification of the dual address dma channel, - in case channel 3 is unavailable. On the SH4, channels 1,2, and 3 - are dual-address capable. - config SH_DMABRG bool "SH7760 DMABRG support" depends on CPU_SUBTYPE_SH7760 diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index 6d1cbbe6745c..fbc6f2c8649f 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -1,5 +1,6 @@ config PCI bool "PCI support" + depends on SYS_SUPPORTS_PCI help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 9104b6257644..1f141a8ba17c 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -4,10 +4,9 @@ extra-y := head.o init_task.o vmlinux.lds -obj-y := process.o signal.o traps.o irq.o \ - ptrace.o setup.o time.o sys_sh.o semaphore.o \ - io.o io_generic.o sh_ksyms.o syscalls.o \ - debugtraps.o +obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process.o ptrace.o \ + semaphore.o setup.o signal.o sys_sh.o syscalls.o \ + time.o topology.o traps.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ @@ -17,7 +16,7 @@ obj-$(CONFIG_CF_ENABLER) += cf-enabler.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o -obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_MODULES) += sh_ksyms.o module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index ebc73b85094a..1c3b99642e1c 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -75,11 +75,7 @@ static int __init cf_init_default(void) #if defined(CONFIG_CPU_SH4) allocate_cf_area(); #endif -#if defined(CONFIG_SH_UNKNOWN) - /* This should be done in each board's init_xxx_irq. */ - make_imask_irq(14); - disable_irq(14); -#endif + return 0; } diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 6451ad630174..9172e97dc26a 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -21,8 +21,7 @@ #include #include #include - -extern void detect_cpu_and_cache_system(void); +#include /* * Generic wrapper for command line arguments to disable on-chip @@ -152,15 +151,6 @@ static void __init cache_init(void) flags |= CCR_CACHE_CB; #endif -#ifdef CONFIG_SH_OCRAM - /* Turn on OCRAM -- halve the OC */ - flags |= CCR_CACHE_ORA; - current_cpu_data.dcache.sets >>= 1; - - current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets * - current_cpu_data.dcache.linesz; -#endif - ctrl_outl(flags, CCR); back_to_P1(); } @@ -269,7 +259,6 @@ asmlinkage void __init sh_cpu_init(void) } #endif -#ifdef CONFIG_UBC_WAKEUP /* * Some brain-damaged loaders decided it would be a good idea to put * the UBC to sleep. This causes some issues when it comes to things @@ -277,7 +266,5 @@ asmlinkage void __init sh_cpu_init(void) * we wake it up and hope that all is well. */ ubc_wakeup(); -#endif - speculative_execution_init(); } diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c index d8e22f4ff0f0..cc5221390e09 100644 --- a/arch/sh/kernel/cpu/irq/intc2.c +++ b/arch/sh/kernel/cpu/irq/intc2.c @@ -13,36 +13,31 @@ #include #include #include +#include -#if defined(CONFIG_CPU_SUBTYPE_SH7760) -#define INTC2_BASE 0xfe080000 -#define INTC2_INTMSK (INTC2_BASE + 0x40) -#define INTC2_INTMSKCLR (INTC2_BASE + 0x60) -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) -#define INTC2_BASE 0xffd40000 -#define INTC2_INTMSK (INTC2_BASE + 0x38) -#define INTC2_INTMSKCLR (INTC2_BASE + 0x3c) -#endif +static inline struct intc2_desc *get_intc2_desc(unsigned int irq) +{ + struct irq_chip *chip = get_irq_chip(irq); + return (void *)((char *)chip - offsetof(struct intc2_desc, chip)); +} static void disable_intc2_irq(unsigned int irq) { struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, INTC2_INTMSK + p->msk_offset); + struct intc2_desc *d = get_intc2_desc(irq); + + ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset + + (hard_smp_processor_id() * 4)); } static void enable_intc2_irq(unsigned int irq) { struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, INTC2_INTMSKCLR + p->msk_offset); -} + struct intc2_desc *d = get_intc2_desc(irq); -static struct irq_chip intc2_irq_chip = { - .name = "INTC2", - .mask = disable_intc2_irq, - .unmask = enable_intc2_irq, - .mask_ack = disable_intc2_irq, -}; + ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset + + (hard_smp_processor_id() * 4)); +} /* * Setup an INTC2 style interrupt. @@ -56,30 +51,36 @@ static struct irq_chip intc2_irq_chip = { * * in the intc2_data table. */ -void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs) +void register_intc2_controller(struct intc2_desc *desc) { int i; - for (i = 0; i < nr_irqs; i++) { + desc->chip.mask = disable_intc2_irq; + desc->chip.unmask = enable_intc2_irq; + desc->chip.mask_ack = disable_intc2_irq; + + for (i = 0; i < desc->nr_irqs; i++) { unsigned long ipr, flags; - struct intc2_data *p = table + i; + struct intc2_data *p = desc->intc2_data + i; disable_irq_nosync(p->irq); - /* Set the priority level */ - local_irq_save(flags); + if (desc->prio_base) { + /* Set the priority level */ + local_irq_save(flags); - ipr = ctrl_inl(INTC2_BASE + p->ipr_offset); - ipr &= ~(0xf << p->ipr_shift); - ipr |= p->priority << p->ipr_shift; - ctrl_outl(ipr, INTC2_BASE + p->ipr_offset); + ipr = ctrl_inl(desc->prio_base + p->ipr_offset); + ipr &= ~(0xf << p->ipr_shift); + ipr |= p->priority << p->ipr_shift; + ctrl_outl(ipr, desc->prio_base + p->ipr_offset); - local_irq_restore(flags); + local_irq_restore(flags); + } - set_irq_chip_and_handler_name(p->irq, &intc2_irq_chip, + set_irq_chip_and_handler_name(p->irq, &desc->chip, handle_level_irq, "level"); set_irq_chip_data(p->irq, p); - enable_intc2_irq(p->irq); + disable_intc2_irq(p->irq); } } diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index 210280b6fddf..98e84f40c713 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -22,58 +22,57 @@ #include #include +static inline struct ipr_desc *get_ipr_desc(unsigned int irq) +{ + struct irq_chip *chip = get_irq_chip(irq); + return (void *)((char *)chip - offsetof(struct ipr_desc, chip)); +} + static void disable_ipr_irq(unsigned int irq) { struct ipr_data *p = get_irq_chip_data(irq); + unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx]; /* Set the priority in IPR to 0 */ - ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); + ctrl_outw(ctrl_inw(addr) & (0xffff ^ (0xf << p->shift)), addr); } static void enable_ipr_irq(unsigned int irq) { struct ipr_data *p = get_irq_chip_data(irq); + unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx]; /* Set priority in IPR back to original value */ - ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); + ctrl_outw(ctrl_inw(addr) | (p->priority << p->shift), addr); } -static struct irq_chip ipr_irq_chip = { - .name = "IPR", - .mask = disable_ipr_irq, - .unmask = enable_ipr_irq, - .mask_ack = disable_ipr_irq, -}; +/* + * The shift value is now the number of bits to shift, not the number of + * bits/4. This is to make it easier to read the value directly from the + * datasheets. The IPR address is calculated using the ipr_offset table. + */ -unsigned int map_ipridx_to_addr(int idx) __attribute__ ((weak)); -unsigned int map_ipridx_to_addr(int idx) -{ - return 0; -} - -void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) +void register_ipr_controller(struct ipr_desc *desc) { int i; - for (i = 0; i < nr_irqs; i++) { - unsigned int irq = table[i].irq; + desc->chip.mask = disable_ipr_irq; + desc->chip.unmask = enable_ipr_irq; + desc->chip.mask_ack = disable_ipr_irq; - if (!irq) - irq = table[i].irq = i; + for (i = 0; i < desc->nr_irqs; i++) { + struct ipr_data *p = desc->ipr_data + i; - /* could the IPR index be mapped, if not we ignore this */ - if (!table[i].addr) { - table[i].addr = map_ipridx_to_addr(table[i].ipr_idx); - if (!table[i].addr) - continue; - } + BUG_ON(p->ipr_idx >= desc->nr_offsets); + BUG_ON(!desc->ipr_offsets[p->ipr_idx]); - disable_irq_nosync(irq); - set_irq_chip_and_handler_name(irq, &ipr_irq_chip, + disable_irq_nosync(p->irq); + set_irq_chip_and_handler_name(p->irq, &desc->chip, handle_level_irq, "level"); - set_irq_chip_data(irq, &table[i]); - enable_ipr_irq(irq); + set_irq_chip_data(p->irq, p); + disable_ipr_irq(p->irq); } } -EXPORT_SYMBOL(make_ipr_irq); + +EXPORT_SYMBOL(register_ipr_controller); #if !defined(CONFIG_CPU_HAS_PINT_IRQ) int ipr_irq_demux(int irq) diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index c16dc8fec489..ee8f1fe84b08 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -311,6 +311,7 @@ restore_all: rte nop + .align 2 #ifdef CONFIG_TRACE_IRQFLAGS 1: .long trace_hardirqs_off #endif diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c index 108e81b682ed..abbf17427e52 100644 --- a/arch/sh/kernel/cpu/sh2/probe.c +++ b/arch/sh/kernel/cpu/sh2/probe.c @@ -9,23 +9,14 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ - - #include +#include #include #include int __init detect_cpu_and_cache_system(void) { -#if defined(CONFIG_CPU_SUBTYPE_SH7604) - current_cpu_data.type = CPU_SH7604; - current_cpu_data.dcache.ways = 4; - current_cpu_data.dcache.way_incr = (1<<10); - current_cpu_data.dcache.sets = 64; - current_cpu_data.dcache.entry_shift = 4; - current_cpu_data.dcache.linesz = L1_CACHE_BYTES; - current_cpu_data.dcache.flags = 0; -#elif defined(CONFIG_CPU_SUBTYPE_SH7619) +#if defined(CONFIG_CPU_SUBTYPE_SH7619) current_cpu_data.type = CPU_SH7619; current_cpu_data.dcache.ways = 4; current_cpu_data.dcache.way_incr = (1<<12); diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index f83ff8a68f35..1a107fe22dde 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -52,7 +52,7 @@ static int __init sh7619_devices_setup(void) } __initcall(sh7619_devices_setup); -static struct ipr_data sh7619_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { { 86, 0, 4, 2 }, /* CMI0 */ { 88, 1, 12, 3 }, /* SCIF0_ERI */ { 89, 1, 12, 3 }, /* SCIF0_RXI */ @@ -68,7 +68,7 @@ static struct ipr_data sh7619_ipr_map[] = { { 99, 1, 4, 3 }, /* SCIF2_TXI */ }; -static unsigned int ipr_offsets[] = { +static unsigned long ipr_offsets[] = { 0xf8080000, /* IPRC */ 0xf8080002, /* IPRD */ 0xf8080004, /* IPRE */ @@ -76,15 +76,19 @@ static unsigned int ipr_offsets[] = { 0xf8080008, /* IPRG */ }; -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) -{ - if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) - return 0; - return ipr_offsets[idx]; -} +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7619", + }, +}; void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7619_ipr_map, ARRAY_SIZE(sh7619_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index 4ed9110632bc..b6e3a6351fa6 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -57,7 +57,7 @@ static int __init sh7206_devices_setup(void) } __initcall(sh7206_devices_setup); -static struct ipr_data sh7206_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { { 140, 7, 12, 2 }, /* CMI0 */ { 164, 8, 4, 2 }, /* MTU2_TGI1A */ { 240, 13, 12, 3 }, /* SCIF0_BRI */ @@ -78,7 +78,7 @@ static struct ipr_data sh7206_ipr_map[] = { { 255, 13, 0, 3 }, /* SCIF3_TXI */ }; -static unsigned int ipr_offsets[] = { +static unsigned long ipr_offsets[] = { 0xfffe0818, /* IPR01 */ 0xfffe081a, /* IPR02 */ 0, /* unused */ @@ -95,15 +95,19 @@ static unsigned int ipr_offsets[] = { 0xfffe0c10, /* IPR14 */ }; -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) -{ - if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) - return 0; - return ipr_offsets[idx]; -} +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7206", + }, +}; void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7206_ipr_map, ARRAY_SIZE(sh7206_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index b0b59d4a33ca..d8e122971c3e 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -340,8 +340,27 @@ ENTRY(vbr_base) general_exception: mov.l 1f, k2 mov.l 2f, k3 +#ifdef CONFIG_CPU_SUBTYPE_SHX3 + mov.l @k2, k2 + + ! Is EXPEVT larger than 0x800? + mov #0x8, k0 + shll8 k0 + cmp/hs k0, k2 + bf 0f + + ! then add 0x580 (k2 is 0xd80 or 0xda0) + mov #0x58, k0 + shll2 k0 + shll2 k0 + add k0, k2 +0: + bra handle_exception + nop +#else bra handle_exception mov.l @k2, k2 +#endif .align 2 1: .long EXPEVT 2: .long ret_from_exception diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index 1983fb7ad6ea..a55b8ce2c54c 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -48,7 +48,7 @@ static int __init sh7705_devices_setup(void) } __initcall(sh7705_devices_setup); -static struct ipr_data sh7705_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR-idx, shift, priority */ { 16, 0, 12, 2 }, /* TMU0 TUNI*/ { 17, 0, 8, 2 }, /* TMU1 TUNI */ @@ -70,25 +70,29 @@ static struct ipr_data sh7705_ipr_map[] = { }; static unsigned long ipr_offsets[] = { - 0xFFFFFEE2 /* 0: IPRA */ -, 0xFFFFFEE4 /* 1: IPRB */ -, 0xA4000016 /* 2: IPRC */ -, 0xA4000018 /* 3: IPRD */ -, 0xA400001A /* 4: IPRE */ -, 0xA4080000 /* 5: IPRF */ -, 0xA4080002 /* 6: IPRG */ -, 0xA4080004 /* 7: IPRH */ + 0xFFFFFEE2, /* 0: IPRA */ + 0xFFFFFEE4, /* 1: IPRB */ + 0xA4000016, /* 2: IPRC */ + 0xA4000018, /* 3: IPRD */ + 0xA400001A, /* 4: IPRE */ + 0xA4080000, /* 5: IPRF */ + 0xA4080002, /* 6: IPRG */ + 0xA4080004, /* 7: IPRH */ }; -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) -{ - if (idx >= ARRAY_SIZE(ipr_offsets)) - return 0; - return ipr_offsets[idx]; -} +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), -void __init init_IRQ_ipr() + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7705", + }, +}; + +void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7705_ipr_map, ARRAY_SIZE(sh7705_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c index c7d7c35fc834..d79ec0c0522f 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c @@ -12,6 +12,26 @@ #include #include +static struct resource rtc_resources[] = { + [0] = { + .start = 0xfffffec0, + .end = 0xfffffec0 + 0x1e, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 22, + .flags = IORESOURCE_IRQ, + }, +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xfffffe80, @@ -41,8 +61,16 @@ static struct platform_device sci_device = { }, }; +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + static struct platform_device *sh7709_devices[] __initdata = { &sci_device, + &rtc_device, }; static int __init sh7709_devices_setup(void) @@ -52,32 +80,66 @@ static int __init sh7709_devices_setup(void) } __initcall(sh7709_devices_setup); -#define IPRx(A,N) .addr=A, .shift=N -#define IPRA(N) IPRx(0xfffffee2UL,N) -#define IPRB(N) IPRx(0xfffffee4UL,N) -#define IPRC(N) IPRx(0xa4000016UL,N) -#define IPRD(N) IPRx(0xa4000018UL,N) -#define IPRE(N) IPRx(0xa400001aUL,N) +static struct ipr_data ipr_irq_table[] = { + { 16, 0, 12, 2 }, /* TMU TUNI0 */ + { 17, 0, 8, 4 }, /* TMU TUNI1 */ + { 18, 0, 4, 1 }, /* TMU TUNI1 */ + { 19, 0, 4, 1 }, /* TMU TUNI1 */ + { 20, 0, 0, 2 }, /* RTC CUI */ + { 21, 0, 0, 2 }, /* RTC CUI */ + { 22, 0, 0, 2 }, /* RTC CUI */ -static struct ipr_data sh7709_ipr_map[] = { - [16] = { IPRA(12), 2 }, /* TMU TUNI0 */ - [17] = { IPRA(8), 4 }, /* TMU TUNI1 */ - [18 ... 19] = { IPRA(4), 1 }, /* TMU TUNI1 */ - [20 ... 22] = { IPRA(0), 2 }, /* RTC CUI */ - [23 ... 26] = { IPRB(4), 3 }, /* SCI */ - [27] = { IPRB(12), 2 }, /* WDT ITI */ - [32] = { IPRC(0), 1 }, /* IRQ 0 */ - [33] = { IPRC(4), 1 }, /* IRQ 1 */ - [34] = { IPRC(8), 1 }, /* IRQ 2 APM */ - [35] = { IPRC(12), 1 }, /* IRQ 3 TOUCHSCREEN */ - [36] = { IPRD(0), 1 }, /* IRQ 4 */ - [37] = { IPRD(4), 1 }, /* IRQ 5 */ - [48 ... 51] = { IPRE(12), 7 }, /* DMA */ - [52 ... 55] = { IPRE(8), 3 }, /* IRDA */ - [56 ... 59] = { IPRE(4), 3 }, /* SCIF */ + { 23, 1, 4, 3 }, /* SCI */ + { 24, 1, 4, 3 }, /* SCI */ + { 25, 1, 4, 3 }, /* SCI */ + { 26, 1, 4, 3 }, /* SCI */ + { 27, 1, 12, 3 }, /* WDT ITI */ + + { 32, 2, 0, 1 }, /* IRQ 0 */ + { 33, 2, 4, 1 }, /* IRQ 1 */ + { 34, 2, 8, 1 }, /* IRQ 2 APM */ + { 35, 2, 12, 1 }, /* IRQ 3 TOUCHSCREEN */ + + { 36, 3, 0, 1 }, /* IRQ 4 */ + { 37, 3, 4, 1 }, /* IRQ 5 */ + + { 48, 4, 12, 7 }, /* DMA */ + { 49, 4, 12, 7 }, /* DMA */ + { 50, 4, 12, 7 }, /* DMA */ + { 51, 4, 12, 7 }, /* DMA */ + + { 52, 4, 8, 3 }, /* IRDA */ + { 53, 4, 8, 3 }, /* IRDA */ + { 54, 4, 8, 3 }, /* IRDA */ + { 55, 4, 8, 3 }, /* IRDA */ + + { 56, 4, 4, 3 }, /* SCIF */ + { 57, 4, 4, 3 }, /* SCIF */ + { 58, 4, 4, 3 }, /* SCIF */ + { 59, 4, 4, 3 }, /* SCIF */ }; -void __init init_IRQ_ipr() +static unsigned long ipr_offsets[] = { + 0xfffffee2, /* 0: IPRA */ + 0xfffffee4, /* 1: IPRB */ + 0xa4000016, /* 2: IPRC */ + 0xa4000018, /* 3: IPRD */ + 0xa400001a, /* 4: IPRE */ +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7709", + }, +}; + +void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7709_ipr_map, ARRAY_SIZE(sh7709_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 51760a7e7f1c..f40e6dac337d 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -49,7 +49,7 @@ static int __init sh7710_devices_setup(void) } __initcall(sh7710_devices_setup); -static struct ipr_data sh7710_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR-idx, shift, priority */ { 16, 0, 12, 2 }, /* TMU0 TUNI*/ { 17, 0, 8, 2 }, /* TMU1 TUNI */ @@ -78,26 +78,30 @@ static struct ipr_data sh7710_ipr_map[] = { }; static unsigned long ipr_offsets[] = { - 0xA414FEE2 /* 0: IPRA */ -, 0xA414FEE4 /* 1: IPRB */ -, 0xA4140016 /* 2: IPRC */ -, 0xA4140018 /* 3: IPRD */ -, 0xA414001A /* 4: IPRE */ -, 0xA4080000 /* 5: IPRF */ -, 0xA4080002 /* 6: IPRG */ -, 0xA4080004 /* 7: IPRH */ -, 0xA4080006 /* 8: IPRI */ + 0xA414FEE2, /* 0: IPRA */ + 0xA414FEE4, /* 1: IPRB */ + 0xA4140016, /* 2: IPRC */ + 0xA4140018, /* 3: IPRD */ + 0xA414001A, /* 4: IPRE */ + 0xA4080000, /* 5: IPRF */ + 0xA4080002, /* 6: IPRG */ + 0xA4080004, /* 7: IPRH */ + 0xA4080006, /* 8: IPRI */ }; -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) -{ - if (idx >= ARRAY_SIZE(ipr_offsets)) - return 0; - return ipr_offsets[idx]; -} +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), -void __init init_IRQ_ipr() + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7710", + }, +}; + +void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7710_ipr_map, ARRAY_SIZE(sh7710_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index 8add10bd8268..dadd6bffc128 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -10,7 +10,11 @@ obj-$(CONFIG_SH_STORE_QUEUES) += sq.o # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o +obj-$(CONFIG_CPU_SUBTYPE_SH7750R) += setup-sh7750.o +obj-$(CONFIG_CPU_SUBTYPE_SH7750S) += setup-sh7750.o +obj-$(CONFIG_CPU_SUBTYPE_SH7091) += setup-sh7750.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o +obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += setup-sh7750.o obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index fab2eb07196b..66c3f75647b2 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -141,6 +141,14 @@ int __init detect_cpu_and_cache_system(void) current_cpu_data.flags |= CPU_HAS_LLSC; } break; + case 0x4000: /* 1st cut */ + case 0x4001: /* 2nd cut */ + current_cpu_data.type = CPU_SHX3; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + CPU_HAS_LLSC; + break; case 0x8000: current_cpu_data.type = CPU_ST40RA; current_cpu_data.flags |= CPU_HAS_FPU; diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 03b14cf78ddf..da153bcdfeb2 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -82,7 +82,7 @@ static int __init sh7750_devices_setup(void) } __initcall(sh7750_devices_setup); -static struct ipr_data sh7750_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR-idx, shift, priority */ { 16, 0, 12, 2 }, /* TMU0 TUNI*/ { 17, 0, 12, 2 }, /* TMU1 TUNI */ @@ -106,8 +106,27 @@ static struct ipr_data sh7750_ipr_map[] = { { 38, 2, 8, 7 }, /* DMAC DMAE */ }; +static unsigned long ipr_offsets[] = { + 0xffd00004UL, /* 0: IPRA */ + 0xffd00008UL, /* 1: IPRB */ + 0xffd0000cUL, /* 2: IPRC */ + 0xffd00010UL, /* 3: IPRD */ +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7750", + }, +}; + #ifdef CONFIG_CPU_SUBTYPE_SH7751 -static struct ipr_data sh7751_ipr_map[] = { +static struct ipr_data ipr_irq_table_sh7751[] = { { 44, 2, 8, 7 }, /* DMAC DMTE4 */ { 45, 2, 8, 7 }, /* DMAC DMTE5 */ { 46, 2, 8, 7 }, /* DMAC DMTE6 */ @@ -118,21 +137,26 @@ static struct ipr_data sh7751_ipr_map[] = { /*{ 72, INTPRI00, 8, ? },*/ /* TMU3 TUNI */ /*{ 76, INTPRI00, 12, ? },*/ /* TMU4 TUNI */ }; + +static struct ipr_desc ipr_irq_desc_sh7751 = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table_sh7751, + .nr_irqs = ARRAY_SIZE(ipr_irq_table_sh7751), + + .chip = { + .name = "IPR-sh7751", + }, +}; #endif -static unsigned long ipr_offsets[] = { - 0xffd00004UL, /* 0: IPRA */ - 0xffd00008UL, /* 1: IPRB */ - 0xffd0000cUL, /* 2: IPRC */ - 0xffd00010UL, /* 3: IPRD */ -}; - -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) +void __init init_IRQ_ipr(void) { - if (idx >= ARRAY_SIZE(ipr_offsets)) - return 0; - return ipr_offsets[idx]; + register_ipr_controller(&ipr_irq_desc); +#ifdef CONFIG_CPU_SUBTYPE_SH7751 + register_ipr_controller(&ipr_irq_desc_sh7751); +#endif } #define INTC_ICR 0xffd00000UL @@ -143,11 +167,3 @@ void ipr_irq_enable_irlm(void) { ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); } - -void __init init_IRQ_ipr() -{ - make_ipr_irq(sh7750_ipr_map, ARRAY_SIZE(sh7750_ipr_map)); -#ifdef CONFIG_CPU_SUBTYPE_SH7751 - make_ipr_irq(sh7751_ipr_map, ARRAY_SIZE(sh7751_ipr_map)); -#endif -} diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index b7c702821e6f..3df169755673 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -96,7 +96,25 @@ static struct intc2_data intc2_irq_table[] = { {109,12, 0, 4, 0, 3}, /* CMTI */ }; -static struct ipr_data sh7760_ipr_map[] = { +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0xfe080000, + .msk_base = 0xfe080040, + .mskclr_base = 0xfe080060, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-sh7760", + }, +}; + +void __init init_IRQ_intc2(void) +{ + register_intc2_controller(&intc2_irq_desc); +} + +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR-idx, shift, priority */ { 16, 0, 12, 2 }, /* TMU0 TUNI*/ { 17, 0, 8, 2 }, /* TMU1 TUNI */ @@ -133,20 +151,19 @@ static unsigned long ipr_offsets[] = { 0xffd00010UL, /* 3: IPRD */ }; -/* given the IPR index return the address of the IPR register */ -unsigned int map_ipridx_to_addr(int idx) -{ - if (idx >= ARRAY_SIZE(ipr_offsets)) - return 0; - return ipr_offsets[idx]; -} +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), -void __init init_IRQ_intc2(void) -{ - make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); -} + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), -void __init init_IRQ_ipr(void) + .chip = { + .name = "IPR-sh7760", + }, +}; + +void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7760_ipr_map, ARRAY_SIZE(sh7760_ipr_map)); + register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index ab7422f8f820..400623286487 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o +obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o @@ -17,5 +18,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o +clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c new file mode 100644 index 000000000000..c630b29e06a8 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c @@ -0,0 +1,135 @@ +/* + * arch/sh/kernel/cpu/sh4/clock-shx3.c + * + * SH-X3 support for the clock framework + * + * Copyright (C) 2006-2007 Renesas Technology Corp. + * Copyright (C) 2006-2007 Renesas Solutions Corp. + * Copyright (C) 2006-2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static int ifc_divisors[] = { 1, 2, 4 ,6 }; +static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18, 24, 32, 36, 48 }; +static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, 24, 32, 36, 48 }; +static int cfc_divisors[] = { 1, 1, 4, 6 }; + +#define IFC_POS 28 +#define IFC_MSK 0x0003 +#define BFC_MSK 0x000f +#define PFC_MSK 0x000f +#define CFC_MSK 0x0003 +#define BFC_POS 16 +#define PFC_POS 0 +#define CFC_POS 20 + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK]; +} + +static struct clk_ops shx3_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops shx3_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK); + clk->rate = clk->parent->rate / bfc_divisors[idx]; +} + +static struct clk_ops shx3_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK); + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops shx3_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *shx3_clk_ops[] = { + &shx3_master_clk_ops, + &shx3_module_clk_ops, + &shx3_bus_clk_ops, + &shx3_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(shx3_clk_ops)) + *ops = shx3_clk_ops[idx]; +} + +static void shyway_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK); + clk->rate = clk->parent->rate / cfc_divisors[idx]; +} + +static struct clk_ops shx3_shyway_clk_ops = { + .recalc = shyway_clk_recalc, +}; + +static struct clk shx3_shyway_clk = { + .name = "shyway_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &shx3_shyway_clk_ops, +}; + +/* + * Additional SHx3-specific on-chip clocks that aren't already part of the + * clock framework + */ +static struct clk *shx3_onchip_clocks[] = { + &shx3_shyway_clk, +}; + +static int __init shx3_clk_init(void) +{ + struct clk *clk = clk_get(NULL, "master_clk"); + int i; + + for (i = 0; i < ARRAY_SIZE(shx3_onchip_clocks); i++) { + struct clk *clkp = shx3_onchip_clocks[i]; + + clkp->parent = clk; + clk_register(clkp); + clk_enable(clkp); + } + + /* + * Now that we have the rest of the clocks registered, we need to + * force the parent clock to propagate so that these clocks will + * automatically figure out their rate. We cheat by handing the + * parent clock its current rate and forcing child propagation. + */ + clk_set_rate(clk, clk_get_rate(clk)); + + clk_put(clk); + + return 0; +} +arch_initcall(shx3_clk_init); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 1143fbf65faf..a3e159ef6dfe 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -1,7 +1,7 @@ /* * SH7722 Setup * - * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -10,6 +10,8 @@ #include #include #include +#include +#include #include static struct plat_sci_port sci_platform_data[] = { @@ -42,7 +44,7 @@ static int __init sh7722_devices_setup(void) } __initcall(sh7722_devices_setup); -static struct ipr_data sh7722_ipr_map[] = { +static struct ipr_data ipr_irq_table[] = { /* IRQ, IPR-idx, shift, prio */ { 16, 0, 12, 2 }, /* TMU0 */ { 17, 0, 8, 2 }, /* TMU1 */ @@ -67,14 +69,25 @@ static unsigned long ipr_offsets[] = { 0xa408002c, /* 11: IPRL */ }; -unsigned int map_ipridx_to_addr(int idx) -{ - if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) - return 0; - return ipr_offsets[idx]; -} +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-sh7722", + }, +}; void __init init_IRQ_ipr(void) { - make_ipr_irq(sh7722_ipr_map, ARRAY_SIZE(sh7722_ipr_map)); + register_ipr_controller(&ipr_irq_desc); +} + +void __init plat_mem_setup(void) +{ + /* Register the URAM space as Node 1 */ + setup_bootmem_node(1, 0x055f0000, 0x05610000); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 9aeaa2ddaa28..b57c760bffde 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -102,7 +102,20 @@ static struct intc2_data intc2_irq_table[] = { { 68, 0x14, 8, 0, 18, 2 }, /* PCIC4 */ }; +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0xffd40000, + .msk_base = 0xffd40038, + .mskclr_base = 0xffd4003c, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-sh7780", + }, +}; + void __init init_IRQ_intc2(void) { - make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); + register_intc2_controller(&intc2_irq_desc); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 07b0de82cfe6..ce10ec5d6914 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -97,7 +97,21 @@ static struct intc2_data intc2_irq_table[] = { { 60, 12, 16, 0, 7, 3 }, /* SCIF5 ERI, RXI, BRI, TXI */ }; +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0xffd40000, + .msk_base = 0xffd40038, + .mskclr_base = 0xffd4003c, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-sh7785", + }, +}; + void __init init_IRQ_intc2(void) { - make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); + register_intc2_controller(&intc2_irq_desc); } + diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c new file mode 100644 index 000000000000..70683ea12b83 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -0,0 +1,85 @@ +/* + * SH-X3 Setup + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffc30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, { + .mapbase = 0xffc40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 44, 45, 47, 46 }, + }, { + .mapbase = 0xffc50000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 48, 49, 51, 50 }, + }, { + .mapbase = 0xffc60000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 53, 55, 54 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *shx3_devices[] __initdata = { + &sci_device, +}; + +static int __init shx3_devices_setup(void) +{ + return platform_add_devices(shx3_devices, + ARRAY_SIZE(shx3_devices)); +} +__initcall(shx3_devices_setup); + +static struct intc2_data intc2_irq_table[] = { + { 16, 0, 0, 0, 1, 2 }, /* TMU0 */ + { 40, 4, 0, 0x20, 0, 3 }, /* SCIF0 ERI */ + { 41, 4, 0, 0x20, 1, 3 }, /* SCIF0 RXI */ + { 42, 4, 0, 0x20, 2, 3 }, /* SCIF0 BRI */ + { 43, 4, 0, 0x20, 3, 3 }, /* SCIF0 TXI */ +}; + +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0xfe410000, + .msk_base = 0xfe410820, + .mskclr_base = 0xfe410850, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-SHX3", + }, +}; + +void __init init_IRQ_intc2(void) +{ + register_intc2_controller(&intc2_irq_desc); +} diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 27b923c45b3d..27897798867a 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -158,15 +158,11 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs) } #ifdef CONFIG_4KSTACKS -/* - * These should really be __section__(".bss.page_aligned") as well, but - * gcc's 3.0 and earlier don't handle that correctly. - */ static char softirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__aligned__(THREAD_SIZE))); + __attribute__((__section__(".bss.page_aligned"))); static char hardirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__aligned__(THREAD_SIZE))); + __attribute__((__section__(".bss.page_aligned"))); /* * allocate per-cpu stacks for hardirq and for softirq processing diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c new file mode 100644 index 000000000000..23c5948f0124 --- /dev/null +++ b/arch/sh/kernel/machvec.c @@ -0,0 +1,130 @@ +/* + * arch/sh/kernel/machvec.c + * + * The SuperH machine vector setup handlers, yanked from setup.c + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +#define MV_NAME_SIZE 32 + +#define for_each_mv(mv) \ + for ((mv) = (struct sh_machine_vector *)&__machvec_start; \ + (mv) && (unsigned long)(mv) < (unsigned long)&__machvec_end; \ + (mv)++) + +static struct sh_machine_vector * __init get_mv_byname(const char *name) +{ + struct sh_machine_vector *mv; + + for_each_mv(mv) + if (strcasecmp(name, mv->mv_name) == 0) + return mv; + + return NULL; +} + +static unsigned int __initdata machvec_selected; + +static int __init early_parse_mv(char *from) +{ + char mv_name[MV_NAME_SIZE] = ""; + char *mv_end; + char *mv_comma; + int mv_len; + struct sh_machine_vector *mvp; + + mv_end = strchr(from, ' '); + if (mv_end == NULL) + mv_end = from + strlen(from); + + mv_comma = strchr(from, ','); + mv_len = mv_end - from; + if (mv_len > (MV_NAME_SIZE-1)) + mv_len = MV_NAME_SIZE-1; + memcpy(mv_name, from, mv_len); + mv_name[mv_len] = '\0'; + from = mv_end; + + machvec_selected = 1; + + /* Boot with the generic vector */ + if (strcmp(mv_name, "generic") == 0) + return 0; + + mvp = get_mv_byname(mv_name); + if (unlikely(!mvp)) { + printk("Available vectors:\n\n\t'%s', ", sh_mv.mv_name); + for_each_mv(mvp) + printk("'%s', ", mvp->mv_name); + printk("\n\n"); + panic("Failed to select machvec '%s' -- halting.\n", + mv_name); + } else + sh_mv = *mvp; + + return 0; +} +early_param("sh_mv", early_parse_mv); + +void __init sh_mv_setup(void) +{ + /* + * Only overload the machvec if one hasn't been selected on + * the command line with sh_mv= + */ + if (!machvec_selected) { + unsigned long machvec_size; + + machvec_size = ((unsigned long)&__machvec_end - + (unsigned long)&__machvec_start); + + /* + * If the machvec hasn't been preselected, use the first + * vector (usually the only one) from .machvec.init. + */ + if (machvec_size >= sizeof(struct sh_machine_vector)) + sh_mv = *(struct sh_machine_vector *)&__machvec_start; + } + + printk(KERN_NOTICE "Booting machvec: %s\n", get_system_type()); + + /* + * Manually walk the vec, fill in anything that the board hasn't yet + * by hand, wrapping to the generic implementation. + */ +#define mv_set(elem) do { \ + if (!sh_mv.mv_##elem) \ + sh_mv.mv_##elem = generic_##elem; \ +} while (0) + + mv_set(inb); mv_set(inw); mv_set(inl); + mv_set(outb); mv_set(outw); mv_set(outl); + + mv_set(inb_p); mv_set(inw_p); mv_set(inl_p); + mv_set(outb_p); mv_set(outw_p); mv_set(outl_p); + + mv_set(insb); mv_set(insw); mv_set(insl); + mv_set(outsb); mv_set(outsw); mv_set(outsl); + + mv_set(readb); mv_set(readw); mv_set(readl); + mv_set(writeb); mv_set(writew); mv_set(writel); + + mv_set(ioport_map); + mv_set(ioport_unmap); + mv_set(irq_demux); + + if (!sh_mv.mv_nr_irqs) + sh_mv.mv_nr_irqs = NR_IRQS; +} diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index a11e2aa73cbc..6334a4c54c7c 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -319,9 +320,7 @@ static void ubc_set_tracing(int asid, unsigned long pc) ctrl_outl(pc, UBC_BARA); #ifdef CONFIG_MMU - /* We don't have any ASID settings for the SH-2! */ - if (current_cpu_data.type != CPU_SH7604) - ctrl_outb(asid, UBC_BASRA); + ctrl_outb(asid, UBC_BASRA); #endif ctrl_outl(0, UBC_BAMRA); @@ -405,8 +404,8 @@ asmlinkage int sys_fork(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs __regs) { - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); #ifdef CONFIG_MMU + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); return do_fork(SIGCHLD, regs->regs[15], regs, 0, NULL, NULL); #else /* fork almost works, enough to trick you into looking elsewhere :-( */ @@ -449,23 +448,20 @@ asmlinkage int sys_vfork(unsigned long r4, unsigned long r5, /* * sys_execve() executes a new program. */ -asmlinkage int sys_execve(char *ufilename, char **uargv, - char **uenvp, unsigned long r7, +asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv, + char __user * __user *uenvp, unsigned long r7, struct pt_regs __regs) { struct pt_regs *regs = RELOC_HIDE(&__regs, 0); int error; char *filename; - filename = getname((char __user *)ufilename); + filename = getname(ufilename); error = PTR_ERR(filename); if (IS_ERR(filename)) goto out; - error = do_execve(filename, - (char __user * __user *)uargv, - (char __user * __user *)uenvp, - regs); + error = do_execve(filename, uargv, uenvp, regs); if (error == 0) { task_lock(current); current->ptrace &= ~PT_DTRACE; diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c index 3fb5fc0b550d..f2eaa485d04d 100644 --- a/arch/sh/kernel/ptrace.c +++ b/arch/sh/kernel/ptrace.c @@ -99,7 +99,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) ret = -EIO; if (copied != sizeof(tmp)) break; - ret = put_user(tmp,(unsigned long *) data); + ret = put_user(tmp,(unsigned long __user *) data); break; } @@ -128,7 +128,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) tmp = !!tsk_used_math(child); else tmp = 0; - ret = put_user(tmp, (unsigned long *)data); + ret = put_user(tmp, (unsigned long __user *)data); break; } @@ -196,7 +196,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case PTRACE_SINGLESTEP: { /* set the trap flag. */ long pc; - struct pt_regs *dummy = NULL; + struct pt_regs *regs = NULL; ret = -EIO; if (!valid_signal(data)) @@ -207,7 +207,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) child->ptrace |= PT_DTRACE; } - pc = get_stack_long(child, (long)&dummy->pc); + pc = get_stack_long(child, (long)®s->pc); /* Next scheduling will set up UBC */ if (child->thread.ubc_pc == 0) diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index c27729135935..de8e6e2f2c87 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -41,20 +42,19 @@ extern void * __rd_start, * __rd_end; * The bigger value means no problem. */ struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, }; + +/* + * The machine vector. First entry in .machvec.init, or clobbered by + * sh_mv= on the command line, prior to .machvec.init teardown. + */ +struct sh_machine_vector sh_mv = { .mv_name = "generic", }; + #ifdef CONFIG_VT struct screen_info screen_info; #endif -#if defined(CONFIG_SH_UNKNOWN) -struct sh_machine_vector sh_mv; -#endif - extern int root_mountflags; -#define MV_NAME_SIZE 32 - -static struct sh_machine_vector* __init get_mv_byname(const char* name); - /* * This is set up by the setup-routine at boot-time */ @@ -80,131 +80,17 @@ static struct resource data_resource = { .name = "Kernel data", }; unsigned long memory_start, memory_end; -static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE], - struct sh_machine_vector** mvp, - unsigned long *mv_io_base) +static int __init early_parse_mem(char *p) { - char c = ' ', *to = command_line, *from = COMMAND_LINE; - int len = 0; - - /* Save unparsed command line copy for /proc/cmdline */ - memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); - boot_command_line[COMMAND_LINE_SIZE-1] = '\0'; + unsigned long size; memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; - memory_end = memory_start + __MEMORY_SIZE; - - for (;;) { - /* - * "mem=XXX[kKmM]" defines a size of memory. - */ - if (c == ' ' && !memcmp(from, "mem=", 4)) { - if (to != command_line) - to--; - { - unsigned long mem_size; - - mem_size = memparse(from+4, &from); - memory_end = memory_start + mem_size; - } - } - - if (c == ' ' && !memcmp(from, "sh_mv=", 6)) { - char* mv_end; - char* mv_comma; - int mv_len; - if (to != command_line) - to--; - from += 6; - mv_end = strchr(from, ' '); - if (mv_end == NULL) - mv_end = from + strlen(from); - - mv_comma = strchr(from, ','); - if ((mv_comma != NULL) && (mv_comma < mv_end)) { - int ints[3]; - get_options(mv_comma+1, ARRAY_SIZE(ints), ints); - *mv_io_base = ints[1]; - mv_len = mv_comma - from; - } else { - mv_len = mv_end - from; - } - if (mv_len > (MV_NAME_SIZE-1)) - mv_len = MV_NAME_SIZE-1; - memcpy(mv_name, from, mv_len); - mv_name[mv_len] = '\0'; - from = mv_end; - - *mvp = get_mv_byname(mv_name); - } - - c = *(from++); - if (!c) - break; - if (COMMAND_LINE_SIZE <= ++len) - break; - *(to++) = c; - } - *to = '\0'; - *cmdline_p = command_line; -} - -static int __init sh_mv_setup(char **cmdline_p) -{ -#ifdef CONFIG_SH_UNKNOWN - extern struct sh_machine_vector mv_unknown; -#endif - struct sh_machine_vector *mv = NULL; - char mv_name[MV_NAME_SIZE] = ""; - unsigned long mv_io_base = 0; - - parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base); - -#ifdef CONFIG_SH_UNKNOWN - if (mv == NULL) { - mv = &mv_unknown; - if (*mv_name != '\0') { - printk("Warning: Unsupported machine %s, using unknown\n", - mv_name); - } - } - sh_mv = *mv; -#endif - - /* - * Manually walk the vec, fill in anything that the board hasn't yet - * by hand, wrapping to the generic implementation. - */ -#define mv_set(elem) do { \ - if (!sh_mv.mv_##elem) \ - sh_mv.mv_##elem = generic_##elem; \ -} while (0) - - mv_set(inb); mv_set(inw); mv_set(inl); - mv_set(outb); mv_set(outw); mv_set(outl); - - mv_set(inb_p); mv_set(inw_p); mv_set(inl_p); - mv_set(outb_p); mv_set(outw_p); mv_set(outl_p); - - mv_set(insb); mv_set(insw); mv_set(insl); - mv_set(outsb); mv_set(outsw); mv_set(outsl); - - mv_set(readb); mv_set(readw); mv_set(readl); - mv_set(writeb); mv_set(writew); mv_set(writel); - - mv_set(ioport_map); - mv_set(ioport_unmap); - mv_set(irq_demux); - -#ifdef CONFIG_SH_UNKNOWN - __set_io_port_base(mv_io_base); -#endif - - if (!sh_mv.mv_nr_irqs) - sh_mv.mv_nr_irqs = NR_IRQS; + size = memparse(p, &p); + memory_end = memory_start + size; return 0; } +early_param("mem", early_parse_mem); /* * Register fully available low RAM pages with the bootmem allocator. @@ -230,7 +116,7 @@ static void __init register_bootmem_low_pages(void) free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(pages)); } -void __init setup_bootmem_allocator(unsigned long start_pfn) +void __init setup_bootmem_allocator(unsigned long free_pfn) { unsigned long bootmap_size; @@ -239,9 +125,10 @@ void __init setup_bootmem_allocator(unsigned long start_pfn) * bootstrap step all allocations (until the page allocator * is intact) must be done via bootmem_alloc(). */ - bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, + bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn, min_low_pfn, max_low_pfn); + add_active_range(0, min_low_pfn, max_low_pfn); register_bootmem_low_pages(); node_set_online(0); @@ -254,7 +141,7 @@ void __init setup_bootmem_allocator(unsigned long start_pfn) * an invalid RAM area. */ reserve_bootmem(__MEMORY_START+PAGE_SIZE, - (PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START); + (PFN_PHYS(free_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START); /* * reserve physical page 0 - it's a special BIOS page on many boxes, @@ -262,6 +149,8 @@ void __init setup_bootmem_allocator(unsigned long start_pfn) */ reserve_bootmem(__MEMORY_START, PAGE_SIZE); + sparse_memory_present_with_active_regions(0); + #ifdef CONFIG_BLK_DEV_INITRD ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); if (&__rd_start != &__rd_end) { @@ -315,10 +204,6 @@ void __init setup_arch(char **cmdline_p) { enable_mmu(); -#ifdef CONFIG_CMDLINE_BOOL - strcpy(COMMAND_LINE, CONFIG_CMDLINE); -#endif - ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); #ifdef CONFIG_BLK_DEV_RAM @@ -339,9 +224,22 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; + memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; + memory_end = memory_start + __MEMORY_SIZE; + +#ifdef CONFIG_CMDLINE_BOOL + strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line)); +#else + strlcpy(command_line, COMMAND_LINE, sizeof(command_line)); +#endif + + /* Save unparsed command line copy for /proc/cmdline */ + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; + parse_early_param(); - sh_mv_setup(cmdline_p); + sh_mv_setup(); /* * Find the highest page frame number we have available @@ -355,8 +253,9 @@ void __init setup_arch(char **cmdline_p) min_low_pfn = __MEMORY_START >> PAGE_SHIFT; nodes_clear(node_online_map); + + /* Setup bootmem with available RAM */ setup_memory(); - paging_init(); sparse_init(); #ifdef CONFIG_DUMMY_CONSOLE @@ -366,46 +265,13 @@ void __init setup_arch(char **cmdline_p) /* Perform the machine specific initialisation */ if (likely(sh_mv.mv_setup)) sh_mv.mv_setup(cmdline_p); + + paging_init(); } -struct sh_machine_vector* __init get_mv_byname(const char* name) -{ - extern long __machvec_start, __machvec_end; - struct sh_machine_vector *all_vecs = - (struct sh_machine_vector *)&__machvec_start; - - int i, n = ((unsigned long)&__machvec_end - - (unsigned long)&__machvec_start)/ - sizeof(struct sh_machine_vector); - - for (i = 0; i < n; ++i) { - struct sh_machine_vector *mv = &all_vecs[i]; - if (mv == NULL) - continue; - if (strcasecmp(name, get_system_type()) == 0) { - return mv; - } - } - return NULL; -} - -static struct cpu cpu[NR_CPUS]; - -static int __init topology_init(void) -{ - int cpu_id; - - for_each_possible_cpu(cpu_id) - register_cpu(&cpu[cpu_id], cpu_id); - - return 0; -} - -subsys_initcall(topology_init); - static const char *cpu_name[] = { [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", - [CPU_SH7604] = "SH7604", [CPU_SH7300] = "SH7300", + [CPU_SH7300] = "SH7300", [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", @@ -419,7 +285,7 @@ static const char *cpu_name[] = { [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722", - [CPU_SH_NONE] = "Unknown" + [CPU_SHX3] = "SH-X3", [CPU_SH_NONE] = "Unknown" }; const char *get_cpu_subtype(struct sh_cpuinfo *c) diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index c1cfcb9f047c..c968dcf09eee 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -78,6 +78,16 @@ DECLARE_EXPORT(__movstr); DECLARE_EXPORT(__movmem_i4_even); DECLARE_EXPORT(__movmem_i4_odd); DECLARE_EXPORT(__movmemSI12_i4); + +#if (__GNUC_MINOR__ == 2 || defined(__GNUC_STM_RELEASE__)) +/* + * GCC 4.2 emits these for division, as do GCC 4.1.x versions of the ST + * compiler which include backported patches. + */ +DECLARE_EXPORT(__sdivsi3_i4i); +DECLARE_EXPORT(__udiv_qrnnd_16); +DECLARE_EXPORT(__udivsi3_i4i); +#endif #else /* GCC 3.x */ DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index e323e299878b..706d81ccd101 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -261,7 +262,7 @@ asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5, goto badframe; /* It is more difficult to avoid calling this function than to call it and ignore errors. */ - do_sigaltstack(&st, NULL, regs->regs[15]); + do_sigaltstack((const stack_t __user *)&st, NULL, (unsigned long)frame); return r0; diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S index 7db1c2dc5992..ff5656e60c05 100644 --- a/arch/sh/kernel/syscalls.S +++ b/arch/sh/kernel/syscalls.S @@ -308,9 +308,9 @@ ENTRY(sys_call_table) .long sys_utimes .long sys_fadvise64_64_wrapper .long sys_ni_syscall /* Reserved for vserver */ - .long sys_ni_syscall /* Reserved for mbind */ - .long sys_ni_syscall /* 275 - get_mempolicy */ - .long sys_ni_syscall /* set_mempolicy */ + .long sys_mbind + .long sys_get_mempolicy /* 275 */ + .long sys_set_mempolicy .long sys_mq_open .long sys_mq_unlink .long sys_mq_timedsend diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 2d997e2a5b6c..097ebd49f1bf 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -30,7 +30,7 @@ static int tmu_timer_start(void) { - ctrl_outb(ctrl_inb(TMU_TSTR) | 0x3, TMU_TSTR); + ctrl_outb(ctrl_inb(TMU_012_TSTR) | 0x3, TMU_012_TSTR); return 0; } @@ -52,7 +52,7 @@ static void tmu0_timer_set_interval(unsigned long interval, unsigned int reload) static int tmu_timer_stop(void) { - ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x3, TMU_TSTR); + ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~0x3, TMU_012_TSTR); return 0; } @@ -174,7 +174,8 @@ static int tmu_timer_init(void) #if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \ !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ - !defined(CONFIG_CPU_SUBTYPE_SH7785) + !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ + !defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); #endif diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c new file mode 100644 index 000000000000..9b5844a1bdaa --- /dev/null +++ b/arch/sh/kernel/topology.c @@ -0,0 +1,49 @@ +/* + * arch/sh/kernel/topology.c + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +static DEFINE_PER_CPU(struct cpu, cpu_devices); + +static int __init topology_init(void) +{ + int i, ret; + +#ifdef CONFIG_NEED_MULTIPLE_NODES + for_each_online_node(i) + register_one_node(i); +#endif + + for_each_present_cpu(i) { + ret = register_cpu(&per_cpu(cpu_devices, i), i); + if (unlikely(ret)) + printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n", + __FUNCTION__, i, ret); + } + +#if defined(CONFIG_NUMA) && !defined(CONFIG_SMP) + /* + * In the UP case, make sure the CPU association is still + * registered under each node. Without this, sysfs fails + * to make the connection between nodes other than node0 + * and cpu0. + */ + for_each_online_node(i) + if (i != numa_node_id()) + register_cpu_under_node(raw_smp_processor_id(), i); +#endif + + return 0; +} +subsys_initcall(topology_init); diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 09480887076b..05a40f3c30bf 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -584,7 +584,7 @@ uspace_segv: info.si_signo = SIGBUS; info.si_errno = 0; info.si_code = si_code; - info.si_addr = (void *) address; + info.si_addr = (void __user *)address; force_sig_info(SIGBUS, &info, current); } else { if (regs->pc & 1) @@ -617,7 +617,7 @@ uspace_segv: */ int is_dsp_inst(struct pt_regs *regs) { - unsigned short inst; + unsigned short inst = 0; /* * Safe guard if DSP mode is already enabled or we're lacking @@ -645,7 +645,6 @@ asmlinkage void do_divide_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs __regs) { - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); siginfo_t info; switch (r4) { diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 4c5b57e9c3c1..0696402f446a 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -97,18 +97,20 @@ SECTIONS __initramfs_end = .; #endif + . = ALIGN(4); __machvec_start = .; - .init.machvec : { *(.init.machvec) } + .machvec.init : { *(.machvec.init) } __machvec_end = .; + . = ALIGN(PAGE_SIZE); - __init_end = .; - - . = ALIGN(4); - __bss_start = .; /* BSS */ - .bss : { *(.bss) } - - . = ALIGN(4); - _end = . ; + .bss : { + __init_end = .; + __bss_start = .; /* BSS */ + *(.bss.page_aligned) + *(.bss) + . = ALIGN(4); + _end = . ; + } /* When something in the kernel is NOT compiled as a module, the * module cleanup code and data are put into these segments. Both diff --git a/arch/sh/lib/div64-generic.c b/arch/sh/lib/div64-generic.c index c02473afd581..4bef3b5d964a 100644 --- a/arch/sh/lib/div64-generic.c +++ b/arch/sh/lib/div64-generic.c @@ -4,16 +4,15 @@ #include -extern u64 __xdiv64_32(u64 n, u32 d); +extern uint64_t __xdiv64_32(u64 n, u32 d); -u64 __div64_32(u64 *xp, u32 y) +uint32_t __div64_32(u64 *xp, u32 y) { - u64 rem; - u64 q = __xdiv64_32(*xp, y); + uint32_t rem; + uint64_t q = __xdiv64_32(*xp, y); rem = *xp - q * y; *xp = q; return rem; } - diff --git a/arch/sh/lib/div64.S b/arch/sh/lib/div64.S index eefc275d64a7..5ee7334ea64f 100644 --- a/arch/sh/lib/div64.S +++ b/arch/sh/lib/div64.S @@ -1,12 +1,12 @@ /* - * unsigned long long __xdiv64_32(unsigned long long n, unsigned long d); + * unsigned long __xdiv64_32(unsigned long long n, unsigned long d); */ #include .text ENTRY(__xdiv64_32) -#ifdef __LITTLE_ENDIAN__ +#ifdef CONFIG_CPU_LITTLE_ENDIAN mov r4, r0 mov r5, r1 #else @@ -34,7 +34,7 @@ ENTRY(__xdiv64_32) rotcl r0 div1 r6, r1 .endr -#ifdef __LITTLE_ENDIAN__ +#ifdef CONFIG_CPU_LITTLE_ENDIAN mov r2, r1 rts rotcl r0 diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c index a38e1eed9e77..ac2d7abd2567 100644 --- a/arch/sh/math-emu/math.c +++ b/arch/sh/math-emu/math.c @@ -507,6 +507,7 @@ static int ieee_fpe_handler(struct pt_regs *regs) unsigned short insn = *(unsigned short *)regs->pc; unsigned short finsn; unsigned long nextpc; + siginfo_t info; int nib[4] = { (insn >> 12) & 0xf, (insn >> 8) & 0xf, @@ -559,9 +560,11 @@ static int ieee_fpe_handler(struct pt_regs *regs) ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); set_tsk_thread_flag(tsk, TIF_USEDFPU); } else { - tsk->thread.trap_no = 11; - tsk->thread.error_code = 0; - force_sig(SIGFPE, tsk); + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = FPE_FLTINV; + info.si_addr = (void __user *)regs->pc; + force_sig_info(SIGFPE, &info, tsk); } regs->pc = nextpc; @@ -576,14 +579,17 @@ asmlinkage void do_fpu_error(unsigned long r4, unsigned long r5, struct pt_regs regs) { struct task_struct *tsk = current; + siginfo_t info; if (ieee_fpe_handler (®s)) return; regs.pc += 2; - tsk->thread.trap_no = 11; - tsk->thread.error_code = 0; - force_sig(SIGFPE, tsk); + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = FPE_FLTINV; + info.si_addr = (void __user *)regs.pc; + force_sig_info(SIGFPE, &info, tsk); } /** diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 253346d7b316..28d79a474cde 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -1,5 +1,3 @@ -menu "Processor selection" - # # Processor families # @@ -38,27 +36,31 @@ config CPU_SUBTYPE_ST40 config CPU_SHX2 bool +config CPU_SHX3 + bool + +choice + prompt "Processor sub-type selection" + # # Processor subtypes # -comment "SH-2 Processor Support" - -config CPU_SUBTYPE_SH7604 - bool "Support SH7604 processor" - select CPU_SH2 +# SH-2 Processor Support config CPU_SUBTYPE_SH7619 bool "Support SH7619 processor" select CPU_SH2 + select CPU_HAS_IPR_IRQ -comment "SH-2A Processor Support" +# SH-2A Processor Support config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A + select CPU_HAS_IPR_IRQ -comment "SH-3 Processor Support" +# SH-3 Processor Support config CPU_SUBTYPE_SH7300 bool "Support SH7300 processor" @@ -113,7 +115,7 @@ config CPU_SUBTYPE_SH7712 help Select SH7712 if you have a SH3-DSP SH7712 CPU. -comment "SH-4 Processor Support" +# SH-4 Processor Support config CPU_SUBTYPE_SH7750 bool "Support SH7750 processor" @@ -125,7 +127,7 @@ config CPU_SUBTYPE_SH7750 config CPU_SUBTYPE_SH7091 bool "Support SH7091 processor" select CPU_SH4 - select CPU_SUBTYPE_SH7750 + select CPU_HAS_IPR_IRQ help Select SH7091 if you have an SH-4 based Sega device (such as the Dreamcast, Naomi, and Naomi 2). @@ -133,13 +135,11 @@ config CPU_SUBTYPE_SH7091 config CPU_SUBTYPE_SH7750R bool "Support SH7750R processor" select CPU_SH4 - select CPU_SUBTYPE_SH7750 select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7750S bool "Support SH7750S processor" select CPU_SH4 - select CPU_SUBTYPE_SH7750 select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7751 @@ -153,7 +153,6 @@ config CPU_SUBTYPE_SH7751 config CPU_SUBTYPE_SH7751R bool "Support SH7751R processor" select CPU_SH4 - select CPU_SUBTYPE_SH7751 select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7760 @@ -166,7 +165,7 @@ config CPU_SUBTYPE_SH4_202 bool "Support SH4-202 processor" select CPU_SH4 -comment "ST40 Processor Support" +# ST40 Processor Support config CPU_SUBTYPE_ST40STB1 bool "Support ST40STB1/ST40RA processors" @@ -181,7 +180,7 @@ config CPU_SUBTYPE_ST40GX1 help Select ST40GX1 if you have a ST40GX1 CPU. -comment "SH-4A Processor Support" +# SH-4A Processor Support config CPU_SUBTYPE_SH7770 bool "Support SH7770 processor" @@ -198,7 +197,13 @@ config CPU_SUBTYPE_SH7785 select CPU_SHX2 select CPU_HAS_INTC2_IRQ -comment "SH4AL-DSP Processor Support" +config CPU_SUBTYPE_SHX3 + bool "Support SH-X3 processor" + select CPU_SH4A + select CPU_SHX3 + select CPU_HAS_INTC2_IRQ + +# SH4AL-DSP Processor Support config CPU_SUBTYPE_SH73180 bool "Support SH73180 processor" @@ -213,8 +218,10 @@ config CPU_SUBTYPE_SH7722 select CPU_SH4AL_DSP select CPU_SHX2 select CPU_HAS_IPR_IRQ + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA -endmenu +endchoice menu "Memory management options" @@ -266,7 +273,7 @@ config MEMORY_SIZE config 32BIT bool "Support 32-bit physical addressing through PMB" - depends on CPU_SH4A && MMU && (!X2TLB || BROKEN) + depends on MMU && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785) default y help If you say Y here, physical addressing will be extended to @@ -295,6 +302,17 @@ config VSYSCALL For systems with an MMU that can afford to give up a page, (the default value) say Y. +config NUMA + bool "Non Uniform Memory Access (NUMA) Support" + depends on MMU && SYS_SUPPORTS_NUMA && EXPERIMENTAL + default n + help + Some SH systems have many various memories scattered around + the address space, each with varying latencies. This enables + support for these blocks by binding them to nodes and allowing + memory policies to be used for prioritizing and controlling + allocation behaviour. + config NODES_SHIFT int default "1" @@ -302,14 +320,34 @@ config NODES_SHIFT config ARCH_FLATMEM_ENABLE def_bool y + depends on !NUMA + +config ARCH_SPARSEMEM_ENABLE + def_bool y + select SPARSEMEM_STATIC + +config ARCH_SPARSEMEM_DEFAULT + def_bool y config MAX_ACTIVE_REGIONS int + default "2" if (CPU_SUBTYPE_SH7722 && SPARSEMEM) default "1" config ARCH_POPULATES_NODE_MAP def_bool y +config ARCH_SELECT_MEMORY_MODEL + def_bool y + +config ARCH_ENABLE_MEMORY_HOTPLUG + def_bool y + depends on SPARSEMEM + +config ARCH_MEMORY_PROBE + def_bool y + depends on MEMORY_HOTPLUG + choice prompt "Kernel page size" default PAGE_SIZE_4KB @@ -394,15 +432,4 @@ config SH_WRITETHROUGH If unsure, say N. -config SH_OCRAM - bool "Operand Cache RAM (OCRAM) support" - help - Selecting this option will automatically tear down the number of - sets in the dcache by half, which in turn exposes a memory range. - - The addresses for the OC RAM base will vary according to the - processor version. Consult vendor documentation for specifics. - - If unsure, say N. - endmenu diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index 3ffd7f68c0a2..d677d7f3afc1 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -8,9 +8,6 @@ obj-$(CONFIG_CPU_SH2) += cache-sh2.o obj-$(CONFIG_CPU_SH3) += cache-sh3.o obj-$(CONFIG_CPU_SH4) += cache-sh4.o -obj-$(CONFIG_DMA_PAGE_OPS) += pg-dma.o -obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o - mmu-y := fault-nommu.o tlb-nommu.o pg-nommu.o mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o tlb-flush.o \ ioremap.o @@ -27,5 +24,7 @@ obj-$(CONFIG_CPU_SH4) += tlb-sh4.o pg-sh4.o obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o endif +obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o obj-$(CONFIG_32BIT) += pmb.o +obj-$(CONFIG_NUMA) += numa.o diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index c878faa4ae46..0b3eaf6fbb28 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -32,7 +32,6 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, struct task_struct *tsk; struct mm_struct *mm; struct vm_area_struct * vma; - unsigned long page; int si_code; siginfo_t info; @@ -170,24 +169,38 @@ no_context: * terminate things with extreme prejudice. * */ - if (address < PAGE_SIZE) - printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); - else - printk(KERN_ALERT "Unable to handle kernel paging request"); - printk(" at virtual address %08lx\n", address); - printk(KERN_ALERT "pc = %08lx\n", regs->pc); - page = (unsigned long)get_TTB(); - if (page) { - page = ((unsigned long *) page)[address >> PGDIR_SHIFT]; - printk(KERN_ALERT "*pde = %08lx\n", page); - if (page & _PAGE_PRESENT) { - page &= PAGE_MASK; - address &= 0x003ff000; - page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT]; - printk(KERN_ALERT "*pte = %08lx\n", page); + + bust_spinlocks(1); + + if (oops_may_print()) { + __typeof__(pte_val(__pte(0))) page; + + if (address < PAGE_SIZE) + printk(KERN_ALERT "Unable to handle kernel NULL " + "pointer dereference"); + else + printk(KERN_ALERT "Unable to handle kernel paging " + "request"); + printk(" at virtual address %08lx\n", address); + printk(KERN_ALERT "pc = %08lx\n", regs->pc); + page = (unsigned long)get_TTB(); + if (page) { + page = ((__typeof__(page) *) __va(page))[address >> + PGDIR_SHIFT]; + printk(KERN_ALERT "*pde = %08lx\n", page); + if (page & _PAGE_PRESENT) { + page &= PAGE_MASK; + address &= 0x003ff000; + page = ((__typeof__(page) *) + __va(page))[address >> + PAGE_SHIFT]; + printk(KERN_ALERT "*pte = %08lx\n", page); + } } } + die("Oops", regs, writeaccess); + bust_spinlocks(0); do_exit(SIGKILL); /* diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index e0e644ff3204..82b68c789a5f 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -18,6 +18,7 @@ #include #include #include +#include #include DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -36,14 +37,11 @@ void show_mem(void) show_free_areas(); for_each_online_pgdat(pgdat) { - struct page *page, *end; - unsigned long flags; + unsigned long flags, i; pgdat_resize_lock(pgdat, &flags); - page = pgdat->node_mem_map; - end = page + pgdat->node_spanned_pages; - - do { + for (i = 0; i < pgdat->node_spanned_pages; i++) { + struct page *page = pgdat_page_nr(pgdat, i); total++; if (PageReserved(page)) reserved++; @@ -55,9 +53,7 @@ void show_mem(void) free++; else shared += page_count(page) - 1; - page++; - } while (page < end); - + } pgdat_resize_unlock(pgdat, &flags); } @@ -137,16 +133,12 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) } #endif /* CONFIG_MMU */ -/* References to section boundaries */ - -extern char _text, _etext, _edata, __bss_start, _end; -extern char __init_begin, __init_end; - /* * paging_init() sets up the page tables */ void __init paging_init(void) { + unsigned long max_zone_pfns[MAX_NR_ZONES]; int nid; /* We don't need to map the kernel through the TLB, as @@ -158,43 +150,39 @@ void __init paging_init(void) * check for a null value. */ set_TTB(swapper_pg_dir); + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); + for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); - unsigned long max_zone_pfns[MAX_NR_ZONES]; unsigned long low, start_pfn; - memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); - start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT; low = pgdat->bdata->node_low_pfn; - max_zone_pfns[ZONE_NORMAL] = low; - add_active_range(nid, start_pfn, low); + if (max_zone_pfns[ZONE_NORMAL] < low) + max_zone_pfns[ZONE_NORMAL] = low; printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n", nid, start_pfn, low); - - free_area_init_nodes(max_zone_pfns); - - printk("Node %u: mem_map starts at %p\n", - pgdat->node_id, pgdat->node_mem_map); } + + free_area_init_nodes(max_zone_pfns); } static struct kcore_list kcore_mem, kcore_vmalloc; void __init mem_init(void) { - int codesize, reservedpages, datasize, initsize; + int codesize, datasize, initsize; int nid; - reservedpages = 0; + num_physpages = 0; + high_memory = NULL; for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); unsigned long node_pages = 0; void *node_high_memory; - int i; num_physpages += pgdat->node_present_pages; @@ -203,13 +191,9 @@ void __init mem_init(void) totalram_pages += node_pages; - for (i = 0; i < node_pages; i++) - if (PageReserved(pgdat->node_mem_map + i)) - reservedpages++; - - node_high_memory = (void *)((pgdat->node_start_pfn + - pgdat->node_spanned_pages) << - PAGE_SHIFT); + node_high_memory = (void *)__va((pgdat->node_start_pfn + + pgdat->node_spanned_pages) << + PAGE_SHIFT); if (node_high_memory > high_memory) high_memory = node_high_memory; } @@ -239,11 +223,10 @@ void __init mem_init(void) VMALLOC_END - VMALLOC_START); printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, " - "%dk reserved, %dk data, %dk init)\n", + "%dk data, %dk init)\n", (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), - totalram_pages << (PAGE_SHIFT-10), + num_physpages << (PAGE_SHIFT-10), codesize >> 10, - reservedpages << (PAGE_SHIFT-10), datasize >> 10, initsize >> 10); @@ -264,7 +247,9 @@ void free_initmem(void) free_page(addr); totalram_pages++; } - printk ("Freeing unused kernel memory: %dk freed\n", (&__init_end - &__init_begin) >> 10); + printk("Freeing unused kernel memory: %ldk freed\n", + ((unsigned long)&__init_end - + (unsigned long)&__init_begin) >> 10); } #ifdef CONFIG_BLK_DEV_INITRD @@ -277,6 +262,50 @@ void free_initrd_mem(unsigned long start, unsigned long end) free_page(p); totalram_pages++; } - printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); + printk("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); } #endif + +#ifdef CONFIG_MEMORY_HOTPLUG +void online_page(struct page *page) +{ + ClearPageReserved(page); + init_page_count(page); + __free_page(page); + totalram_pages++; + num_physpages++; +} + +int arch_add_memory(int nid, u64 start, u64 size) +{ + pg_data_t *pgdat; + unsigned long start_pfn = start >> PAGE_SHIFT; + unsigned long nr_pages = size >> PAGE_SHIFT; + int ret; + + pgdat = NODE_DATA(nid); + + /* We only have ZONE_NORMAL, so this is easy.. */ + ret = __add_pages(pgdat->node_zones + ZONE_NORMAL, start_pfn, nr_pages); + if (unlikely(ret)) + printk("%s: Failed, __add_pages() == %d\n", __FUNCTION__, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(arch_add_memory); + +int remove_memory(u64 start, u64 size) +{ + return -EINVAL; +} +EXPORT_SYMBOL_GPL(remove_memory); + +#ifdef CONFIG_NUMA +int memory_add_physaddr_to_nid(u64 addr) +{ + /* Node 0 for now.. */ + return 0; +} +EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); +#endif +#endif diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c new file mode 100644 index 000000000000..8aff065dd307 --- /dev/null +++ b/arch/sh/mm/numa.c @@ -0,0 +1,92 @@ +/* + * arch/sh/mm/numa.c - Multiple node support for SH machines + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +static bootmem_data_t plat_node_bdata[MAX_NUMNODES]; +struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; +EXPORT_SYMBOL_GPL(node_data); + +/* + * On SH machines the conventional approach is to stash system RAM + * in node 0, and other memory blocks in to node 1 and up, ordered by + * latency. Each node's pgdat is node-local at the beginning of the node, + * immediately followed by the node mem map. + */ +void __init setup_memory(void) +{ + unsigned long free_pfn = PFN_UP(__pa(_end)); + + /* + * Node 0 sets up its pgdat at the first available pfn, + * and bumps it up before setting up the bootmem allocator. + */ + NODE_DATA(0) = pfn_to_kaddr(free_pfn); + memset(NODE_DATA(0), 0, sizeof(struct pglist_data)); + free_pfn += PFN_UP(sizeof(struct pglist_data)); + NODE_DATA(0)->bdata = &plat_node_bdata[0]; + + /* Set up node 0 */ + setup_bootmem_allocator(free_pfn); + + /* Give the platforms a chance to hook up their nodes */ + plat_mem_setup(); +} + +void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end) +{ + unsigned long bootmap_pages, bootmap_start, bootmap_size; + unsigned long start_pfn, free_pfn, end_pfn; + + /* Don't allow bogus node assignment */ + BUG_ON(nid > MAX_NUMNODES || nid == 0); + + /* + * The free pfn starts at the beginning of the range, and is + * advanced as necessary for pgdat and node map allocations. + */ + free_pfn = start_pfn = start >> PAGE_SHIFT; + end_pfn = end >> PAGE_SHIFT; + + add_active_range(nid, start_pfn, end_pfn); + + /* Node-local pgdat */ + NODE_DATA(nid) = pfn_to_kaddr(free_pfn); + free_pfn += PFN_UP(sizeof(struct pglist_data)); + memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); + + NODE_DATA(nid)->bdata = &plat_node_bdata[nid]; + NODE_DATA(nid)->node_start_pfn = start_pfn; + NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn; + + /* Node-local bootmap */ + bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn); + bootmap_start = (unsigned long)pfn_to_kaddr(free_pfn); + bootmap_size = init_bootmem_node(NODE_DATA(nid), free_pfn, start_pfn, + end_pfn); + + free_bootmem_with_active_regions(nid, end_pfn); + + /* Reserve the pgdat and bootmap space with the bootmem allocator */ + reserve_bootmem_node(NODE_DATA(nid), start_pfn << PAGE_SHIFT, + sizeof(struct pglist_data)); + reserve_bootmem_node(NODE_DATA(nid), free_pfn << PAGE_SHIFT, + bootmap_pages << PAGE_SHIFT); + + /* It's up */ + node_set_online(nid); + + /* Kick sparsemem */ + sparse_memory_present_with_active_regions(nid); +} diff --git a/arch/sh/mm/pg-dma.c b/arch/sh/mm/pg-dma.c deleted file mode 100644 index bb23679369d6..000000000000 --- a/arch/sh/mm/pg-dma.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * arch/sh/mm/pg-dma.c - * - * Fast clear_page()/copy_page() implementation using the SH DMAC - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Channel to use for page ops, must be dual-address mode capable. */ -static int dma_channel = CONFIG_DMA_PAGE_OPS_CHANNEL; - -static void copy_page_dma(void *to, void *from) -{ - /* - * This doesn't seem to get triggered until further along in the - * boot process, at which point the DMAC is already initialized. - * Fix this in the same fashion as clear_page_dma() in the event - * that this crashes due to the DMAC not being initialized. - */ - - flush_icache_range((unsigned long)from, PAGE_SIZE); - dma_write_page(dma_channel, (unsigned long)from, (unsigned long)to); - dma_wait_for_completion(dma_channel); -} - -static void clear_page_dma(void *to) -{ - /* - * We get invoked quite early on, if the DMAC hasn't been initialized - * yet, fall back on the slow manual implementation. - */ - if (dma_info[dma_channel].chan != dma_channel) { - clear_page_slow(to); - return; - } - - dma_write_page(dma_channel, (unsigned long)empty_zero_page, - (unsigned long)to); - - /* - * FIXME: Something is a bit racy here, if we poll the counter right - * away, we seem to lock. flushing the page from the dcache doesn't - * seem to make a difference one way or the other, though either a full - * icache or dcache flush does. - * - * The location of this is important as well, and must happen prior to - * the completion loop but after the transfer was initiated. - * - * Oddly enough, this doesn't appear to be an issue for copy_page().. - */ - flush_icache_range((unsigned long)to, PAGE_SIZE); - - dma_wait_for_completion(dma_channel); -} - -static int __init pg_dma_init(void) -{ - int ret; - - ret = request_dma(dma_channel, "page ops"); - if (ret != 0) - return ret; - - copy_page = copy_page_dma; - clear_page = clear_page_dma; - - return ret; -} - -static void __exit pg_dma_exit(void) -{ - free_dma(dma_channel); -} - -module_init(pg_dma_init); -module_exit(pg_dma_exit); - -MODULE_AUTHOR("Paul Mundt "); -MODULE_DESCRIPTION("Optimized page copy/clear routines using a dual-address mode capable DMAC channel"); -MODULE_LICENSE("GPL"); - diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile index 3c370a113291..567516b58acc 100644 --- a/arch/sh/tools/Makefile +++ b/arch/sh/tools/Makefile @@ -12,4 +12,5 @@ include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' + $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index fb40f188aff9..4b5e9305092e 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -18,7 +18,6 @@ SE SH_SOLUTION_ENGINE HP6XX SH_HP6XX HD64461 HD64461 HD64465 HD64465 -SATURN SH_SATURN DREAMCAST SH_DREAMCAST MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 @@ -34,3 +33,4 @@ R7785RP SH_R7785RP TITAN SH_TITAN SHMIN SH_SHMIN 7710VOIPGW SH_7710VOIPGW +LBOXRE2 SH_LBOX_RE2 diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 1f89496d530e..672cd1042539 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -367,7 +367,9 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) } else { #ifdef CONFIG_CPU_SUBTYPE_SH7343 /* Nothing */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */ #else ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */ diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index fb04fb5f9843..247fb66bf0f4 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -53,7 +53,12 @@ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) +#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ + defined(CONFIG_CPU_SUBTYPE_SH7091) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) # define SCSPTR1 0xffe0001c /* 8 bit SCI */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ @@ -73,7 +78,7 @@ # define SCPDR 0xA4050136 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ # define SCIF_ONLY -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ # define SCI_NPORTS 2 # define SCIF_ORER 0x0001 /* overrun error bit */ @@ -168,6 +173,14 @@ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +# define SCSPTR0 0xffc30020 /* 16 bit SCIF */ +# define SCSPTR1 0xffc40020 /* 16 bit SCIF */ +# define SCSPTR2 0xffc50020 /* 16 bit SCIF */ +# define SCSPTR3 0xffc60020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* Overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCIF_ONLY #else # error CPU subtype not defined #endif @@ -177,10 +190,15 @@ #define SCI_CTRL_FLAGS_RIE 0x40 /* all */ #define SCI_CTRL_FLAGS_TE 0x20 /* all */ #define SCI_CTRL_FLAGS_RE 0x10 /* all */ -#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) +#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ + defined(CONFIG_CPU_SUBTYPE_SH7091) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SHX3) #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ #else #define SCI_CTRL_FLAGS_REIE 0 @@ -514,8 +532,12 @@ static inline void set_sh771x_scif_pfc(struct uart_port *port) } } -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ +#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ + defined(CONFIG_CPU_SUBTYPE_SH7091) || \ defined(CONFIG_CPU_SUBTYPE_SH4_202) static inline int sci_rxd_in(struct uart_port *port) { @@ -653,6 +675,18 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } +#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffc30000) + return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffc40000) + return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffc50000) + return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffc60000) + return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ +} #endif /* diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index df2909ae704c..2ba959a83eb0 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -115,11 +115,11 @@ enum { VO_PAL, VO_NTSC, VO_VGA }; enum { PAL_ARGB1555, PAL_RGB565, PAL_ARGB4444, PAL_ARGB8888 }; struct pvr2_params { unsigned int val; char *name; }; -static struct pvr2_params cables[] __initdata = { +static struct pvr2_params cables[] __devinitdata = { { CT_VGA, "VGA" }, { CT_RGB, "RGB" }, { CT_COMPOSITE, "COMPOSITE" }, }; -static struct pvr2_params outputs[] __initdata = { +static struct pvr2_params outputs[] __devinitdata = { { VO_PAL, "PAL" }, { VO_NTSC, "NTSC" }, { VO_VGA, "VGA" }, }; @@ -147,16 +147,16 @@ static struct pvr2fb_par { static struct fb_info *fb_info; -static struct fb_fix_screeninfo pvr2_fix __initdata = { +static struct fb_fix_screeninfo pvr2_fix __devinitdata = { .id = "NEC PowerVR2", - .type = FB_TYPE_PACKED_PIXELS, - .visual = FB_VISUAL_TRUECOLOR, + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_TRUECOLOR, .ypanstep = 1, .ywrapstep = 1, - .accel = FB_ACCEL_NONE, + .accel = FB_ACCEL_NONE, }; -static struct fb_var_screeninfo pvr2_var __initdata = { +static struct fb_var_screeninfo pvr2_var __devinitdata = { .xres = 640, .yres = 480, .xres_virtual = 640, @@ -195,10 +195,6 @@ static unsigned int shdma = PVR2_CASCADE_CHAN; static unsigned int pvr2dma = ONCHIP_NR_DMA_CHANNELS; #endif -/* Interface used by the world */ - -int pvr2fb_setup(char*); - static int pvr2fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, unsigned int blue, unsigned int transp, struct fb_info *info); static int pvr2fb_blank(int blank, struct fb_info *info); @@ -227,12 +223,12 @@ static struct fb_ops pvr2fb_ops = { #ifdef CONFIG_SH_DMA .fb_write = pvr2fb_write, #endif - .fb_fillrect = cfb_fillrect, + .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, }; -static struct fb_videomode pvr2_modedb[] __initdata = { +static struct fb_videomode pvr2_modedb[] __devinitdata = { /* * Broadcast video modes (PAL and NTSC). I'm unfamiliar with * PAL-M and PAL-N, but from what I've read both modes parallel PAL and @@ -252,7 +248,7 @@ static struct fb_videomode pvr2_modedb[] __initdata = { /* 640x480 @ 60hz (VGA) */ "vga_640x480", 60, 640, 480, VGA_CLK, 38, 33, 0, 18, 146, 26, 0, FB_VMODE_YWRAP - }, + }, }; #define NUM_TOTAL_MODES ARRAY_SIZE(pvr2_modedb) @@ -262,7 +258,7 @@ static struct fb_videomode pvr2_modedb[] __initdata = { #define DEFMODE_VGA 2 static int defmode = DEFMODE_NTSC; -static char *mode_option __initdata = NULL; +static char *mode_option __devinitdata = NULL; static inline void pvr2fb_set_pal_type(unsigned int type) { @@ -293,7 +289,7 @@ static void set_color_bitfields(struct fb_var_screeninfo *var) { switch (var->bits_per_pixel) { case 16: /* RGB 565 */ - pvr2fb_set_pal_type(PAL_RGB565); + pvr2fb_set_pal_type(PAL_RGB565); var->red.offset = 11; var->red.length = 5; var->green.offset = 5; var->green.length = 6; var->blue.offset = 0; var->blue.length = 5; @@ -306,7 +302,7 @@ static void set_color_bitfields(struct fb_var_screeninfo *var) var->transp.offset = 0; var->transp.length = 0; break; case 32: /* ARGB 8888 */ - pvr2fb_set_pal_type(PAL_ARGB8888); + pvr2fb_set_pal_type(PAL_ARGB8888); var->red.offset = 16; var->red.length = 8; var->green.offset = 8; var->green.length = 8; var->blue.offset = 0; var->blue.length = 8; @@ -379,13 +375,13 @@ static int pvr2fb_set_par(struct fb_info *info) var->vmode &= FB_VMODE_MASK; if (var->vmode & FB_VMODE_INTERLACED && video_output != VO_VGA) par->is_interlaced = 1; - /* + /* * XXX: Need to be more creative with this (i.e. allow doublecan for * PAL/NTSC output). */ if (var->vmode & FB_VMODE_DOUBLE && video_output == VO_VGA) par->is_doublescan = 1; - + par->hsync_total = var->left_margin + var->xres + var->right_margin + var->hsync_len; par->vsync_total = var->upper_margin + var->yres + var->lower_margin + @@ -408,7 +404,7 @@ static int pvr2fb_set_par(struct fb_info *info) } else { /* VGA mode */ /* XXX: What else needs to be checked? */ - /* + /* * XXX: We have a little freedom in VGA modes, what ranges * should be here (i.e. hsync/vsync totals, etc.)? */ @@ -419,8 +415,8 @@ static int pvr2fb_set_par(struct fb_info *info) /* Calculate the remainding offsets */ par->diwstart_h = par->borderstart_h + var->left_margin; par->diwstart_v = par->borderstart_v + var->upper_margin; - par->borderstop_h = par->diwstart_h + var->xres + - var->right_margin; + par->borderstop_h = par->diwstart_h + var->xres + + var->right_margin; par->borderstop_v = par->diwstart_v + var->yres + var->lower_margin; @@ -465,12 +461,12 @@ static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) set_color_bitfields(var); if (var->vmode & FB_VMODE_YWRAP) { - if (var->xoffset || var->yoffset < 0 || + if (var->xoffset || var->yoffset < 0 || var->yoffset >= var->yres_virtual) { var->xoffset = var->yoffset = 0; } else { if (var->xoffset > var->xres_virtual - var->xres || - var->yoffset > var->yres_virtual - var->yres || + var->yoffset > var->yres_virtual - var->yres || var->xoffset < 0 || var->yoffset < 0) var->xoffset = var->yoffset = 0; } @@ -478,7 +474,7 @@ static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) var->xoffset = var->yoffset = 0; } - /* + /* * XXX: Need to be more creative with this (i.e. allow doublecan for * PAL/NTSC output). */ @@ -507,7 +503,7 @@ static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) var->vsync_len = par->borderstop_v + (par->vsync_total - par->borderstop_v); } - + hsync_total = var->left_margin + var->xres + var->right_margin + var->hsync_len; vtotal = var->upper_margin + var->yres + var->lower_margin + @@ -531,7 +527,7 @@ static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) } } } - + /* Check memory sizes */ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel); if (line_length * var->yres_virtual > info->fix.smem_len) @@ -552,7 +548,7 @@ static void pvr2_update_display(struct fb_info *info) DISP_DIWADDRS); } -/* +/* * Initialize the video mode. Currently, the 16bpp and 24bpp modes aren't * very stable. It's probably due to the fact that a lot of the 2D video * registers are still undocumented. @@ -592,18 +588,18 @@ static void pvr2_init_display(struct fb_info *info) /* display window start position */ fb_writel(par->diwstart_h, DISP_DIWHSTRT); fb_writel((par->diwstart_v << 16) | par->diwstart_v, DISP_DIWVSTRT); - + /* misc. settings */ fb_writel((0x16 << 16) | par->is_lowres, DISP_DIWCONF); /* clock doubler (for VGA), scan doubler, display enable */ - fb_writel(((video_output == VO_VGA) << 23) | + fb_writel(((video_output == VO_VGA) << 23) | (par->is_doublescan << 1) | 1, DISP_DIWMODE); /* bits per pixel */ fb_writel(fb_readl(DISP_DIWMODE) | (--bytesperpixel << 2), DISP_DIWMODE); - /* video enable, color sync, interlace, + /* video enable, color sync, interlace, * hsync and vsync polarity (currently unused) */ fb_writel(0x100 | ((par->is_interlaced /*|4*/) << 4), DISP_SYNCCONF); } @@ -657,7 +653,7 @@ static irqreturn_t pvr2fb_interrupt(int irq, void *dev_id) static int pvr2_init_cable(void) { if (cable_type < 0) { - fb_writel((fb_readl(PCTRA) & 0xfff0ffff) | 0x000a0000, + fb_writel((fb_readl(PCTRA) & 0xfff0ffff) | 0x000a0000, PCTRA); cable_type = (fb_readw(PDTRA) >> 8) & 3; } @@ -687,7 +683,7 @@ static ssize_t pvr2fb_write(struct fb_info *info, const char *buf, pages = kmalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); if (!pages) return -ENOMEM; - + down_read(¤t->mm->mmap_sem); ret = get_user_pages(current, current->mm, (unsigned long)buf, nr_pages, WRITE, 0, pages, NULL); @@ -700,7 +696,7 @@ static ssize_t pvr2fb_write(struct fb_info *info, const char *buf, } dma_configure_channel(shdma, 0x12c1); - + dst = (unsigned long)fb_info->screen_base + *ppos; start = (unsigned long)page_address(pages[0]); end = (unsigned long)page_address(pages[nr_pages]); @@ -744,7 +740,7 @@ out_unmap: kfree(pages); return ret; -} +} #endif /* CONFIG_SH_DMA */ /** @@ -765,21 +761,21 @@ out_unmap: * in for flexibility anyways. Who knows, maybe someone has tv-out on a * PCI-based version of these things ;-) */ -static int __init pvr2fb_common_init(void) +static int __devinit pvr2fb_common_init(void) { struct pvr2fb_par *par = currentpar; unsigned long modememused, rev; fb_info->screen_base = ioremap_nocache(pvr2_fix.smem_start, pvr2_fix.smem_len); - + if (!fb_info->screen_base) { printk(KERN_ERR "pvr2fb: Failed to remap smem space\n"); goto out_err; } par->mmio_base = (unsigned long)ioremap_nocache(pvr2_fix.mmio_start, - pvr2_fix.mmio_len); + pvr2_fix.mmio_len); if (!par->mmio_base) { printk(KERN_ERR "pvr2fb: Failed to remap mmio space\n"); goto out_err; @@ -820,7 +816,7 @@ static int __init pvr2fb_common_init(void) printk("fb%d: %s (rev %ld.%ld) frame buffer device, using %ldk/%ldk of video memory\n", fb_info->node, fb_info->fix.id, (rev >> 4) & 0x0f, rev & 0x0f, modememused >> 10, (unsigned long)(fb_info->fix.smem_len >> 10)); - printk("fb%d: Mode %dx%d-%d pitch = %ld cable: %s video output: %s\n", + printk("fb%d: Mode %dx%d-%d pitch = %ld cable: %s video output: %s\n", fb_info->node, fb_info->var.xres, fb_info->var.yres, fb_info->var.bits_per_pixel, get_line_length(fb_info->var.xres, fb_info->var.bits_per_pixel), @@ -878,8 +874,8 @@ static int __init pvr2fb_dc_init(void) video_output = VO_NTSC; } } - - /* + + /* * Nothing exciting about the DC PVR2 .. only a measly 8MiB. */ pvr2_fix.smem_start = 0xa5000000; /* RAM starts here */ @@ -903,7 +899,7 @@ static int __init pvr2fb_dc_init(void) return pvr2fb_common_init(); } -static void pvr2fb_dc_exit(void) +static void __exit pvr2fb_dc_exit(void) { if (fb_info->screen_base) { iounmap(fb_info->screen_base); @@ -987,13 +983,13 @@ static int __init pvr2fb_pci_init(void) return pci_register_driver(&pvr2fb_pci_driver); } -static void pvr2fb_pci_exit(void) +static void __exit pvr2fb_pci_exit(void) { pci_unregister_driver(&pvr2fb_pci_driver); } #endif /* CONFIG_PCI */ -static int __init pvr2_get_param(const struct pvr2_params *p, const char *s, +static int __devinit pvr2_get_param(const struct pvr2_params *p, const char *s, int val, int size) { int i; @@ -1021,7 +1017,7 @@ static int __init pvr2_get_param(const struct pvr2_params *p, const char *s, */ #ifndef MODULE -int __init pvr2fb_setup(char *options) +static int __init pvr2fb_setup(char *options) { char *this_opt; char cable_arg[80]; @@ -1061,7 +1057,7 @@ static struct pvr2_board { int (*init)(void); void (*exit)(void); char name[16]; -} board_list[] = { +} board_driver[] = { #ifdef CONFIG_SH_DREAMCAST { pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" }, #endif @@ -1071,7 +1067,7 @@ static struct pvr2_board { { 0, }, }; -int __init pvr2fb_init(void) +static int __init pvr2fb_init(void) { int i, ret = -ENODEV; int size; @@ -1095,8 +1091,8 @@ int __init pvr2fb_init(void) currentpar = (struct pvr2fb_par *)(fb_info + 1); - for (i = 0; i < ARRAY_SIZE(board_list); i++) { - struct pvr2_board *pvr_board = board_list + i; + for (i = 0; i < ARRAY_SIZE(board_driver); i++) { + struct pvr2_board *pvr_board = board_driver + i; if (!pvr_board->init) continue; @@ -1118,13 +1114,13 @@ static void __exit pvr2fb_exit(void) { int i; - for (i = 0; i < ARRAY_SIZE(board_list); i++) { - struct pvr2_board *pvr_board = board_list + i; + for (i = 0; i < ARRAY_SIZE(board_driver); i++) { + struct pvr2_board *pvr_board = board_driver + i; if (pvr_board->exit) pvr_board->exit(); } - + #ifdef CONFIG_SH_STORE_QUEUES sq_unmap(pvr2fb_map); #endif @@ -1139,4 +1135,3 @@ module_exit(pvr2fb_exit); MODULE_AUTHOR("Paul Mundt , M. R. Brown "); MODULE_DESCRIPTION("Framebuffer driver for NEC PowerVR 2 based graphics boards"); MODULE_LICENSE("GPL"); - diff --git a/fs/Kconfig b/fs/Kconfig index 94b9d861bf9b..ee11f8d94085 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -991,7 +991,7 @@ config TMPFS_POSIX_ACL config HUGETLBFS bool "HugeTLB file system support" - depends on X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN + depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || BROKEN help hugetlbfs is a filesystem backing for HugeTLB pages, based on ramfs. For architectures that support it, say Y here and read diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index 5a117ec43c77..aeee8da9c54f 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -22,7 +22,7 @@ static void __init check_bugs(void) current_cpu_data.loops_per_jiffy = loops_per_jiffy; switch (current_cpu_data.type) { - case CPU_SH7604 ... CPU_SH7619: + case CPU_SH7619: *p++ = '2'; break; case CPU_SH7206: @@ -35,7 +35,7 @@ static void __init check_bugs(void) case CPU_SH7750 ... CPU_SH4_501: *p++ = '4'; break; - case CPU_SH7770 ... CPU_SH7785: + case CPU_SH7770 ... CPU_SHX3: *p++ = '4'; *p++ = 'a'; break; diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h index 9a3cb6ba9d15..7a18649d1ccb 100644 --- a/include/asm-sh/cache.h +++ b/include/asm-sh/cache.h @@ -9,6 +9,7 @@ #define __ASM_SH_CACHE_H #ifdef __KERNEL__ +#include #include #define SH_CACHE_VALID 1 @@ -48,6 +49,9 @@ struct cache_info { unsigned long flags; }; + +int __init detect_cpu_and_cache_system(void); + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* __ASM_SH_CACHE_H */ diff --git a/include/asm-sh/cpu-sh2/cache.h b/include/asm-sh/cpu-sh2/cache.h index 20b9796842dc..f02ba7a672b2 100644 --- a/include/asm-sh/cpu-sh2/cache.h +++ b/include/asm-sh/cpu-sh2/cache.h @@ -12,23 +12,7 @@ #define L1_CACHE_SHIFT 4 -#if defined(CONFIG_CPU_SUBTYPE_SH7604) -#define CCR 0xfffffe92 /* Address of Cache Control Register */ - -#define CCR_CACHE_CE 0x01 /* Cache enable */ -#define CCR_CACHE_ID 0x02 /* Instruction Replacement disable */ -#define CCR_CACHE_OD 0x04 /* Data Replacement disable */ -#define CCR_CACHE_TW 0x08 /* Two-way mode */ -#define CCR_CACHE_CP 0x10 /* Cache purge */ - -#define CACHE_OC_ADDRESS_ARRAY 0x60000000 - -#define CCR_CACHE_ENABLE CCR_CACHE_CE -#define CCR_CACHE_INVALIDATE CCR_CACHE_CP -#define CCR_CACHE_ORA CCR_CACHE_TW -#define CCR_CACHE_WT 0x00 /* SH-2 is _always_ write-through */ - -#elif defined(CONFIG_CPU_SUBTYPE_SH7619) +#if defined(CONFIG_CPU_SUBTYPE_SH7619) #define CCR1 0xffffffec #define CCR CCR1 @@ -49,5 +33,5 @@ #define CCR_CACHE_ENABLE CCR_CACHE_CE #define CCR_CACHE_INVALIDATE CCR_CACHE_CF #endif -#endif /* __ASM_CPU_SH2_CACHE_H */ +#endif /* __ASM_CPU_SH2_CACHE_H */ diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h index b2394cf76f49..4928b08f9d19 100644 --- a/include/asm-sh/cpu-sh3/timer.h +++ b/include/asm-sh/cpu-sh3/timer.h @@ -29,7 +29,7 @@ #endif #if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710) -#define TMU_TSTR 0xa412fe92 /* Byte access */ +#define TMU_012_TSTR 0xa412fe92 /* Byte access */ #define TMU0_TCOR 0xa412fe94 /* Long access */ #define TMU0_TCNT 0xa412fe98 /* Long access */ @@ -44,7 +44,7 @@ #define TMU2_TCR 0xa412feb4 /* Word access */ #else -#define TMU_TSTR 0xfffffe92 /* Byte access */ +#define TMU_012_TSTR 0xfffffe92 /* Byte access */ #define TMU0_TCOR 0xfffffe94 /* Long access */ #define TMU0_TCNT 0xfffffe98 /* Long access */ diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h index 39f41fcd509d..026025b51cea 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/include/asm-sh/cpu-sh4/freq.h @@ -22,6 +22,8 @@ #define FRQCR0 0xffc80000 #define FRQCR1 0xffc80004 #define FRQMR1 0xffc80014 +#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +#define FRQCR 0xffc00014 #else #define FRQCR 0xffc00000 #define FRQCR_PSTBY 0x0200 diff --git a/include/asm-sh/cpu-sh4/timer.h b/include/asm-sh/cpu-sh4/timer.h index 8a4af126c890..d1e796b96888 100644 --- a/include/asm-sh/cpu-sh4/timer.h +++ b/include/asm-sh/cpu-sh4/timer.h @@ -1,7 +1,7 @@ /* * include/asm-sh/cpu-sh4/timer.h * - * Copyright (C) 2004 Lineo Solutions, Inc. + * Copyright (C) 2004 Lineo Solutions, Inc. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -16,36 +16,45 @@ * SH7750S/SH7750R * SH7751/SH7751R * SH7760 + * SH-X3 * --------------------------------------------------------------------------- */ - -#if !defined(CONFIG_CPU_SUBTYPE_SH7760) -#define TMU_TOCR 0xffd80000 /* Byte access */ +#ifdef CONFIG_CPU_SUBTYPE_SHX3 +#define TMU_012_BASE 0xffc10000 +#define TMU_345_BASE 0xffc20000 +#else +#define TMU_012_BASE 0xffd80000 +#define TMU_345_BASE 0xfe100000 #endif -#define TMU_TSTR 0xffd80004 /* Byte access */ -#define TMU0_TCOR 0xffd80008 /* Long access */ -#define TMU0_TCNT 0xffd8000c /* Long access */ -#define TMU0_TCR 0xffd80010 /* Word access */ +#define TMU_TOCR TMU_012_BASE /* Not supported on all CPUs */ -#define TMU1_TCOR 0xffd80014 /* Long access */ -#define TMU1_TCNT 0xffd80018 /* Long access */ -#define TMU1_TCR 0xffd8001c /* Word access */ +#define TMU_012_TSTR (TMU_012_BASE + 0x04) +#define TMU_345_TSTR (TMU_345_BASE + 0x04) -#define TMU2_TCOR 0xffd80020 /* Long access */ -#define TMU2_TCNT 0xffd80024 /* Long access */ -#define TMU2_TCR 0xffd80028 /* Word access */ -#define TMU2_TCPR 0xffd8002c /* Long access */ +#define TMU0_TCOR (TMU_012_BASE + 0x08) +#define TMU0_TCNT (TMU_012_BASE + 0x0c) +#define TMU0_TCR (TMU_012_BASE + 0x10) -#if !defined(CONFIG_CPU_SUBTYPE_SH7760) -#define TMU3_TCOR 0xfe100008 /* Long access */ -#define TMU3_TCNT 0xfe10000c /* Long access */ -#define TMU3_TCR 0xfe100010 /* Word access */ +#define TMU1_TCOR (TMU_012_BASE + 0x14) +#define TMU1_TCNT (TMU_012_BASE + 0x18) +#define TMU1_TCR (TMU_012_BASE + 0x1c) -#define TMU4_TCOR 0xfe100014 /* Long access */ -#define TMU4_TCNT 0xfe100018 /* Long access */ -#define TMU4_TCR 0xfe10001c /* Word access */ -#endif +#define TMU2_TCOR (TMU_012_BASE + 0x20) +#define TMU2_TCNT (TMU_012_BASE + 0x24) +#define TMU2_TCR (TMU_012_BASE + 0x28) +#define TMU2_TCPR (TMU_012_BASE + 0x2c) + +#define TMU3_TCOR (TMU_345_BASE + 0x08) +#define TMU3_TCNT (TMU_345_BASE + 0x0c) +#define TMU3_TCR (TMU_345_BASE + 0x10) + +#define TMU4_TCOR (TMU_345_BASE + 0x14) +#define TMU4_TCNT (TMU_345_BASE + 0x18) +#define TMU4_TCR (TMU_345_BASE + 0x1c) + +#define TMU5_TCOR (TMU_345_BASE + 0x20) +#define TMU5_TCNT (TMU_345_BASE + 0x24) +#define TMU5_TCR (TMU_345_BASE + 0x28) #endif /* __ASM_CPU_SH4_TIMER_H */ - diff --git a/include/asm-sh/futex-irq.h b/include/asm-sh/futex-irq.h new file mode 100644 index 000000000000..a9f16a7f9aea --- /dev/null +++ b/include/asm-sh/futex-irq.h @@ -0,0 +1,111 @@ +#ifndef __ASM_SH_FUTEX_IRQ_H +#define __ASM_SH_FUTEX_IRQ_H + +#include + +static inline int atomic_futex_op_xchg_set(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_add(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval + oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_or(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval | oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_and(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval & oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_xor(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval ^ oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_cmpxchg_inatomic(int __user *uaddr, + int oldval, int newval) +{ + unsigned long flags; + int ret, prev = 0; + + local_irq_save(flags); + + ret = get_user(prev, uaddr); + if (!ret && oldval == prev) + ret = put_user(newval, uaddr); + + local_irq_restore(flags); + + if (ret) + return ret; + + return prev; +} + +#endif /* __ASM_SH_FUTEX_IRQ_H */ diff --git a/include/asm-sh/futex.h b/include/asm-sh/futex.h index 6a332a9f099c..74ed3681d33c 100644 --- a/include/asm-sh/futex.h +++ b/include/asm-sh/futex.h @@ -1,6 +1,77 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H +#ifndef __ASM_SH_FUTEX_H +#define __ASM_SH_FUTEX_H -#include +#ifdef __KERNEL__ -#endif +#include +#include +#include + +/* XXX: UP variants, fix for SH-4A and SMP.. */ +#include + +static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval); + break; + case FUTEX_OP_ADD: + ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval); + break; + case FUTEX_OP_OR: + ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval); + break; + case FUTEX_OP_ANDN: + ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval); + break; + case FUTEX_OP_XOR: + ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval); + break; + default: + ret = -ENOSYS; + break; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + return atomic_futex_op_cmpxchg_inatomic(uaddr, oldval, newval); +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_FUTEX_H */ diff --git a/include/asm-sh/hd64461.h b/include/asm-sh/hd64461.h index 27e5c34e2659..4dd8592ca014 100644 --- a/include/asm-sh/hd64461.h +++ b/include/asm-sh/hd64461.h @@ -1,200 +1,241 @@ #ifndef __ASM_SH_HD64461 #define __ASM_SH_HD64461 /* - * $Id: hd64461.h,v 1.5 2004/03/16 00:07:51 lethal Exp $ + * Copyright (C) 2007 Kristoffer Ericson + * Copyright (C) 2004 Paul Mundt * Copyright (C) 2000 YAEGASHI Takeshi - * Hitachi HD64461 companion chip support + * + * Hitachi HD64461 companion chip support + * (please note manual reference 0x10000000 = 0xb0000000) */ /* Constants for PCMCIA mappings */ -#define HD64461_PCC_WINDOW 0x01000000 +#define HD64461_PCC_WINDOW 0x01000000 -#define HD64461_PCC0_BASE 0xb8000000 /* area 6 */ -#define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) -#define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) -#define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) +/* Area 6 - Slot 0 - memory and/or IO card */ +#define HD64461_PCC0_BASE (CONFIG_HD64461_IOBASE + 0x8000000) +#define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) /* 0xb80000000 */ +#define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) /* 0xb90000000 */ +#define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) /* 0xba0000000 */ -#define HD64461_PCC1_BASE 0xb4000000 /* area 5 */ -#define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) -#define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) +/* Area 5 - Slot 1 - memory card only */ +#define HD64461_PCC1_BASE (CONFIG_HD64461_IOBASE + 0x4000000) +#define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) /* 0xb4000000 */ +#define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */ -#define HD64461_STBCR 0x10000 -#define HD64461_STBCR_CKIO_STBY 0x2000 -#define HD64461_STBCR_SAFECKE_IST 0x1000 -#define HD64461_STBCR_SLCKE_IST 0x0800 -#define HD64461_STBCR_SAFECKE_OST 0x0400 -#define HD64461_STBCR_SLCKE_OST 0x0200 -#define HD64461_STBCR_SMIAST 0x0100 -#define HD64461_STBCR_SLCDST 0x0080 -#define HD64461_STBCR_SPC0ST 0x0040 -#define HD64461_STBCR_SPC1ST 0x0020 -#define HD64461_STBCR_SAFEST 0x0010 -#define HD64461_STBCR_STM0ST 0x0008 -#define HD64461_STBCR_STM1ST 0x0004 -#define HD64461_STBCR_SIRST 0x0002 -#define HD64461_STBCR_SURTST 0x0001 +/* Standby Control Register for HD64461 */ +#define HD64461_STBCR CONFIG_HD64461_IOBASE +#define HD64461_STBCR_CKIO_STBY 0x2000 +#define HD64461_STBCR_SAFECKE_IST 0x1000 +#define HD64461_STBCR_SLCKE_IST 0x0800 +#define HD64461_STBCR_SAFECKE_OST 0x0400 +#define HD64461_STBCR_SLCKE_OST 0x0200 +#define HD64461_STBCR_SMIAST 0x0100 +#define HD64461_STBCR_SLCDST 0x0080 +#define HD64461_STBCR_SPC0ST 0x0040 +#define HD64461_STBCR_SPC1ST 0x0020 +#define HD64461_STBCR_SAFEST 0x0010 +#define HD64461_STBCR_STM0ST 0x0008 +#define HD64461_STBCR_STM1ST 0x0004 +#define HD64461_STBCR_SIRST 0x0002 +#define HD64461_STBCR_SURTST 0x0001 -#define HD64461_SYSCR 0x10002 -#define HD64461_SCPUCR 0x10004 +/* System Configuration Register */ +#define HD64461_SYSCR (CONFIG_HD64461_IOBASE + 0x02) -#define HD64461_LCDCBAR 0x11000 -#define HD64461_LCDCLOR 0x11002 -#define HD64461_LCDCCR 0x11004 -#define HD64461_LCDCCR_STBACK 0x0400 -#define HD64461_LCDCCR_STREQ 0x0100 -#define HD64461_LCDCCR_MOFF 0x0080 -#define HD64461_LCDCCR_REFSEL 0x0040 -#define HD64461_LCDCCR_EPON 0x0020 -#define HD64461_LCDCCR_SPON 0x0010 +/* CPU Data Bus Control Register */ +#define HD64461_SCPUCR (CONFIG_HD64461_IOBASE + 0x04) -#define HD64461_LDR1 0x11010 -#define HD64461_LDR1_DON 0x01 -#define HD64461_LDR1_DINV 0x80 +/* Base Adress Register */ +#define HD64461_LCDCBAR (CONFIG_HD64461_IOBASE + 0x1000) -#define HD64461_LDR2 0x11012 -#define HD64461_LDHNCR 0x11014 -#define HD64461_LDHNSR 0x11016 -#define HD64461_LDVNTR 0x11018 -#define HD64461_LDVNDR 0x1101a -#define HD64461_LDVSPR 0x1101c -#define HD64461_LDR3 0x1101e +/* Line increment adress */ +#define HD64461_LCDCLOR (CONFIG_HD64461_IOBASE + 0x1002) -#define HD64461_CPTWAR 0x11030 -#define HD64461_CPTWDR 0x11032 -#define HD64461_CPTRAR 0x11034 -#define HD64461_CPTRDR 0x11036 +/* Controls LCD controller */ +#define HD64461_LCDCCR (CONFIG_HD64461_IOBASE + 0x1004) -#define HD64461_GRDOR 0x11040 -#define HD64461_GRSCR 0x11042 -#define HD64461_GRCFGR 0x11044 -#define HD64461_GRCFGR_ACCSTATUS 0x10 -#define HD64461_GRCFGR_ACCRESET 0x08 -#define HD64461_GRCFGR_ACCSTART_BITBLT 0x06 -#define HD64461_GRCFGR_ACCSTART_LINE 0x04 -#define HD64461_GRCFGR_COLORDEPTH16 0x01 +/* LCCDR control bits */ +#define HD64461_LCDCCR_STBACK 0x0400 /* Standby Back */ +#define HD64461_LCDCCR_STREQ 0x0100 /* Standby Request */ +#define HD64461_LCDCCR_MOFF 0x0080 /* Memory Off */ +#define HD64461_LCDCCR_REFSEL 0x0040 /* Refresh Select */ +#define HD64461_LCDCCR_EPON 0x0020 /* End Power On */ +#define HD64461_LCDCCR_SPON 0x0010 /* Start Power On */ -#define HD64461_LNSARH 0x11046 -#define HD64461_LNSARL 0x11048 -#define HD64461_LNAXLR 0x1104a -#define HD64461_LNDGR 0x1104c -#define HD64461_LNAXR 0x1104e -#define HD64461_LNERTR 0x11050 -#define HD64461_LNMDR 0x11052 -#define HD64461_BBTSSARH 0x11054 -#define HD64461_BBTSSARL 0x11056 -#define HD64461_BBTDSARH 0x11058 -#define HD64461_BBTDSARL 0x1105a -#define HD64461_BBTDWR 0x1105c -#define HD64461_BBTDHR 0x1105e -#define HD64461_BBTPARH 0x11060 -#define HD64461_BBTPARL 0x11062 -#define HD64461_BBTMARH 0x11064 -#define HD64461_BBTMARL 0x11066 -#define HD64461_BBTROPR 0x11068 -#define HD64461_BBTMDR 0x1106a +/* Controls LCD (1) */ +#define HD64461_LDR1 (CONFIG_HD64461_IOBASE + 0x1010) +#define HD64461_LDR1_DON 0x01 /* Display On */ +#define HD64461_LDR1_DINV 0x80 /* Display Invert */ + +/* Controls LCD (2) */ +#define HD64461_LDR2 (CONFIG_HD64461_IOBASE + 0x1012) +#define HD64461_LDHNCR (CONFIG_HD64461_IOBASE + 0x1014) /* Number of horizontal characters */ +#define HD64461_LDHNSR (CONFIG_HD64461_IOBASE + 0x1016) /* Specify output start position + width of CL1 */ +#define HD64461_LDVNTR (CONFIG_HD64461_IOBASE + 0x1018) /* Specify total vertical lines */ +#define HD64461_LDVNDR (CONFIG_HD64461_IOBASE + 0x101a) /* specify number of display vertical lines */ +#define HD64461_LDVSPR (CONFIG_HD64461_IOBASE + 0x101c) /* specify vertical synchronization pos and AC nr */ + +/* Controls LCD (3) */ +#define HD64461_LDR3 (CONFIG_HD64461_IOBASE + 0x101e) + +/* Palette Registers */ +#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Adress Register */ +#define HD64461_CPTWDR (CONFIG_HD64461_IOBASE + 0x1032) /* Color Palette Write Data Register */ +#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Adress Register */ +#define HD64461_CPTRDR (CONFIG_HD64461_IOBASE + 0x1036) /* Color Palette Read Data Register */ + +#define HD64461_GRDOR (CONFIG_HD64461_IOBASE + 0x1040) /* Display Resolution Offset Register */ +#define HD64461_GRSCR (CONFIG_HD64461_IOBASE + 0x1042) /* Solid Color Register */ +#define HD64461_GRCFGR (CONFIG_HD64461_IOBASE + 0x1044) /* Accelerator Configuration Register */ + +#define HD64461_GRCFGR_ACCSTATUS 0x10 /* Accelerator Status */ +#define HD64461_GRCFGR_ACCRESET 0x08 /* Accelerator Reset */ +#define HD64461_GRCFGR_ACCSTART_BITBLT 0x06 /* Accelerator Start BITBLT */ +#define HD64461_GRCFGR_ACCSTART_LINE 0x04 /* Accelerator Start Line Drawing */ +#define HD64461_GRCFGR_COLORDEPTH16 0x01 /* Sets Colordepth 16 for Accelerator */ +#define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */ + +/* Line Drawing Registers */ +#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Adress Register (H) */ +#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Adress Register (L) */ +#define HD64461_LNAXLR (CONFIG_HD64461_IOBASE + 0x104a) /* Axis Pixel Length Register */ +#define HD64461_LNDGR (CONFIG_HD64461_IOBASE + 0x104c) /* Diagonal Register */ +#define HD64461_LNAXR (CONFIG_HD64461_IOBASE + 0x104e) /* Axial Register */ +#define HD64461_LNERTR (CONFIG_HD64461_IOBASE + 0x1050) /* Start Error Term Register */ +#define HD64461_LNMDR (CONFIG_HD64461_IOBASE + 0x1052) /* Line Mode Register */ + +/* BitBLT Registers */ +#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Adress Register (H) */ +#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Adress Register (L) */ +#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Adress Register (H) */ +#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Adress Register (L) */ +#define HD64461_BBTDWR (CONFIG_HD64461_IOBASE + 0x105c) /* Destination Block Width Register */ +#define HD64461_BBTDHR (CONFIG_HD64461_IOBASE + 0x105e) /* Destination Block Height Register */ +#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Adress Register (H) */ +#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Adress Register (L) */ +#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Adress Register (H) */ +#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Adress Register (L) */ +#define HD64461_BBTROPR (CONFIG_HD64461_IOBASE + 0x1068) /* ROP Register */ +#define HD64461_BBTMDR (CONFIG_HD64461_IOBASE + 0x106a) /* BitBLT Mode Register */ /* PC Card Controller Registers */ -#define HD64461_PCC0ISR 0x12000 /* socket 0 interface status */ -#define HD64461_PCC0GCR 0x12002 /* socket 0 general control */ -#define HD64461_PCC0CSCR 0x12004 /* socket 0 card status change */ -#define HD64461_PCC0CSCIER 0x12006 /* socket 0 card status change interrupt enable */ -#define HD64461_PCC0SCR 0x12008 /* socket 0 software control */ -#define HD64461_PCC1ISR 0x12010 /* socket 1 interface status */ -#define HD64461_PCC1GCR 0x12012 /* socket 1 general control */ -#define HD64461_PCC1CSCR 0x12014 /* socket 1 card status change */ -#define HD64461_PCC1CSCIER 0x12016 /* socket 1 card status change interrupt enable */ -#define HD64461_PCC1SCR 0x12018 /* socket 1 software control */ +/* Maps to Physical Area 6 */ +#define HD64461_PCC0ISR (CONFIG_HD64461_IOBASE + 0x2000) /* socket 0 interface status */ +#define HD64461_PCC0GCR (CONFIG_HD64461_IOBASE + 0x2002) /* socket 0 general control */ +#define HD64461_PCC0CSCR (CONFIG_HD64461_IOBASE + 0x2004) /* socket 0 card status change */ +#define HD64461_PCC0CSCIER (CONFIG_HD64461_IOBASE + 0x2006) /* socket 0 card status change interrupt enable */ +#define HD64461_PCC0SCR (CONFIG_HD64461_IOBASE + 0x2008) /* socket 0 software control */ +/* Maps to Physical Area 5 */ +#define HD64461_PCC1ISR (CONFIG_HD64461_IOBASE + 0x2010) /* socket 1 interface status */ +#define HD64461_PCC1GCR (CONFIG_HD64461_IOBASE + 0x2012) /* socket 1 general control */ +#define HD64461_PCC1CSCR (CONFIG_HD64461_IOBASE + 0x2014) /* socket 1 card status change */ +#define HD64461_PCC1CSCIER (CONFIG_HD64461_IOBASE + 0x2016) /* socket 1 card status change interrupt enable */ +#define HD64461_PCC1SCR (CONFIG_HD64461_IOBASE + 0x2018) /* socket 1 software control */ /* PCC Interface Status Register */ -#define HD64461_PCCISR_READY 0x80 /* card ready */ -#define HD64461_PCCISR_MWP 0x40 /* card write-protected */ -#define HD64461_PCCISR_VS2 0x20 /* voltage select pin 2 */ -#define HD64461_PCCISR_VS1 0x10 /* voltage select pin 1 */ -#define HD64461_PCCISR_CD2 0x08 /* card detect 2 */ -#define HD64461_PCCISR_CD1 0x04 /* card detect 1 */ -#define HD64461_PCCISR_BVD2 0x02 /* battery 1 */ -#define HD64461_PCCISR_BVD1 0x01 /* battery 1 */ +#define HD64461_PCCISR_READY 0x80 /* card ready */ +#define HD64461_PCCISR_MWP 0x40 /* card write-protected */ +#define HD64461_PCCISR_VS2 0x20 /* voltage select pin 2 */ +#define HD64461_PCCISR_VS1 0x10 /* voltage select pin 1 */ +#define HD64461_PCCISR_CD2 0x08 /* card detect 2 */ +#define HD64461_PCCISR_CD1 0x04 /* card detect 1 */ +#define HD64461_PCCISR_BVD2 0x02 /* battery 1 */ +#define HD64461_PCCISR_BVD1 0x01 /* battery 1 */ -#define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */ -#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */ -#define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */ -#define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */ -#define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */ -#define HD64461_PCCISR_BVD_BATDEAD2 0x00 /* battery dead */ +#define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */ +#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */ +#define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */ +#define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */ +#define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */ +#define HD64461_PCCISR_BVD_BATDEAD2 0x00 /* battery dead */ /* PCC General Control Register */ -#define HD64461_PCCGCR_DRVE 0x80 /* output drive */ -#define HD64461_PCCGCR_PCCR 0x40 /* PC card reset */ -#define HD64461_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ -#define HD64461_PCCGCR_VCC0 0x10 /* voltage control pin VCC0SEL0 */ -#define HD64461_PCCGCR_PMMOD 0x08 /* memory mode */ -#define HD64461_PCCGCR_PA25 0x04 /* pin A25 */ -#define HD64461_PCCGCR_PA24 0x02 /* pin A24 */ -#define HD64461_PCCGCR_REG 0x01 /* pin PCC0REG# */ +#define HD64461_PCCGCR_DRVE 0x80 /* output drive */ +#define HD64461_PCCGCR_PCCR 0x40 /* PC card reset */ +#define HD64461_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ +#define HD64461_PCCGCR_VCC0 0x10 /* voltage control pin VCC0SEL0 */ +#define HD64461_PCCGCR_PMMOD 0x08 /* memory mode */ +#define HD64461_PCCGCR_PA25 0x04 /* pin A25 */ +#define HD64461_PCCGCR_PA24 0x02 /* pin A24 */ +#define HD64461_PCCGCR_REG 0x01 /* pin PCC0REG# */ /* PCC Card Status Change Register */ -#define HD64461_PCCCSCR_SCDI 0x80 /* sw card detect intr */ -#define HD64461_PCCCSCR_SRV1 0x40 /* reserved */ -#define HD64461_PCCCSCR_IREQ 0x20 /* IREQ intr req */ -#define HD64461_PCCCSCR_SC 0x10 /* STSCHG (status change) pin */ -#define HD64461_PCCCSCR_CDC 0x08 /* CD (card detect) change */ -#define HD64461_PCCCSCR_RC 0x04 /* READY change */ -#define HD64461_PCCCSCR_BW 0x02 /* battery warning change */ -#define HD64461_PCCCSCR_BD 0x01 /* battery dead change */ +#define HD64461_PCCCSCR_SCDI 0x80 /* sw card detect intr */ +#define HD64461_PCCCSCR_SRV1 0x40 /* reserved */ +#define HD64461_PCCCSCR_IREQ 0x20 /* IREQ intr req */ +#define HD64461_PCCCSCR_SC 0x10 /* STSCHG (status change) pin */ +#define HD64461_PCCCSCR_CDC 0x08 /* CD (card detect) change */ +#define HD64461_PCCCSCR_RC 0x04 /* READY change */ +#define HD64461_PCCCSCR_BW 0x02 /* battery warning change */ +#define HD64461_PCCCSCR_BD 0x01 /* battery dead change */ /* PCC Card Status Change Interrupt Enable Register */ -#define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */ -#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */ -#define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */ -#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */ -#define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */ -#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */ +#define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */ +#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */ +#define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */ +#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */ +#define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */ +#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */ -#define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */ -#define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */ -#define HD64461_PCCCSCIER_RE 0x04 /* ready change enable */ -#define HD64461_PCCCSCIER_BWE 0x02 /* battery warn change enable */ -#define HD64461_PCCCSCIER_BDE 0x01 /* battery dead change enable*/ +#define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */ +#define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */ +#define HD64461_PCCCSCIER_RE 0x04 /* ready change enable */ +#define HD64461_PCCCSCIER_BWE 0x02 /* battery warn change enable */ +#define HD64461_PCCCSCIER_BDE 0x01 /* battery dead change enable*/ /* PCC Software Control Register */ -#define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */ -#define HD64461_PCCSCR_SWP 0x01 /* write protect */ +#define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */ +#define HD64461_PCCSCR_SWP 0x01 /* write protect */ -#define HD64461_P0OCR 0x1202a -#define HD64461_P1OCR 0x1202c -#define HD64461_PGCR 0x1202e +/* PCC0 Output Pins Control Register */ +#define HD64461_P0OCR (CONFIG_HD64461_IOBASE + 0x202a) -#define HD64461_GPACR 0x14000 -#define HD64461_GPBCR 0x14002 -#define HD64461_GPCCR 0x14004 -#define HD64461_GPDCR 0x14006 -#define HD64461_GPADR 0x14010 -#define HD64461_GPBDR 0x14012 -#define HD64461_GPCDR 0x14014 -#define HD64461_GPDDR 0x14016 -#define HD64461_GPAICR 0x14020 -#define HD64461_GPBICR 0x14022 -#define HD64461_GPCICR 0x14024 -#define HD64461_GPDICR 0x14026 -#define HD64461_GPAISR 0x14040 -#define HD64461_GPBISR 0x14042 -#define HD64461_GPCISR 0x14044 -#define HD64461_GPDISR 0x14046 +/* PCC1 Output Pins Control Register */ +#define HD64461_P1OCR (CONFIG_HD64461_IOBASE + 0x202c) -#define HD64461_NIRR 0x15000 -#define HD64461_NIMR 0x15002 +/* PC Card General Control Register */ +#define HD64461_PGCR (CONFIG_HD64461_IOBASE + 0x202e) -#define HD64461_IRQBASE OFFCHIP_IRQ_BASE -#define HD64461_IRQ_NUM 16 +/* Port Control Registers */ +#define HD64461_GPACR (CONFIG_HD64461_IOBASE + 0x4000) /* Port A - Handles IRDA/TIMER */ +#define HD64461_GPBCR (CONFIG_HD64461_IOBASE + 0x4002) /* Port B - Handles UART */ +#define HD64461_GPCCR (CONFIG_HD64461_IOBASE + 0x4004) /* Port C - Handles PCMCIA 1 */ +#define HD64461_GPDCR (CONFIG_HD64461_IOBASE + 0x4006) /* Port D - Handles PCMCIA 1 */ -#define HD64461_IRQ_UART (HD64461_IRQBASE+5) -#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6) -#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9) -#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10) -#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11) -#define HD64461_IRQ_AFE (HD64461_IRQBASE+12) -#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13) -#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14) +/* Port Control Data Registers */ +#define HD64461_GPADR (CONFIG_HD64461_IOBASE + 0x4010) /* A */ +#define HD64461_GPBDR (CONFIG_HD64461_IOBASE + 0x4012) /* B */ +#define HD64461_GPCDR (CONFIG_HD64461_IOBASE + 0x4014) /* C */ +#define HD64461_GPDDR (CONFIG_HD64461_IOBASE + 0x4016) /* D */ + +/* Interrupt Control Registers */ +#define HD64461_GPAICR (CONFIG_HD64461_IOBASE + 0x4020) /* A */ +#define HD64461_GPBICR (CONFIG_HD64461_IOBASE + 0x4022) /* B */ +#define HD64461_GPCICR (CONFIG_HD64461_IOBASE + 0x4024) /* C */ +#define HD64461_GPDICR (CONFIG_HD64461_IOBASE + 0x4026) /* D */ + +/* Interrupt Status Registers */ +#define HD64461_GPAISR (CONFIG_HD64461_IOBASE + 0x4040) /* A */ +#define HD64461_GPBISR (CONFIG_HD64461_IOBASE + 0x4042) /* B */ +#define HD64461_GPCISR (CONFIG_HD64461_IOBASE + 0x4044) /* C */ +#define HD64461_GPDISR (CONFIG_HD64461_IOBASE + 0x4046) /* D */ + +/* Interrupt Request Register & Interrupt Mask Register */ +#define HD64461_NIRR (CONFIG_HD64461_IOBASE + 0x5000) +#define HD64461_NIMR (CONFIG_HD64461_IOBASE + 0x5002) + +#define HD64461_IRQBASE OFFCHIP_IRQ_BASE +#define HD64461_IRQ_NUM 16 + +#define HD64461_IRQ_UART (HD64461_IRQBASE+5) +#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6) +#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9) +#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10) +#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11) +#define HD64461_IRQ_AFE (HD64461_IRQBASE+12) +#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13) +#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14) #define __IO_PREFIX hd64461 #include diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h index 80ee1cda7498..4ca3f765bacc 100644 --- a/include/asm-sh/hw_irq.h +++ b/include/asm-sh/hw_irq.h @@ -5,4 +5,46 @@ extern atomic_t irq_err_count; +struct intc2_data { + unsigned short irq; + unsigned char ipr_offset, ipr_shift; + unsigned char msk_offset, msk_shift; + unsigned char priority; +}; + +struct intc2_desc { + unsigned long prio_base; + unsigned long msk_base; + unsigned long mskclr_base; + struct intc2_data *intc2_data; + unsigned int nr_irqs; + struct irq_chip chip; +}; + +void register_intc2_controller(struct intc2_desc *); +void init_IRQ_intc2(void); + +struct ipr_data { + unsigned char irq; + unsigned char ipr_idx; /* Index for the IPR registered */ + unsigned char shift; /* Number of bits to shift the data */ + unsigned char priority; /* The priority */ +}; + +struct ipr_desc { + unsigned long *ipr_offsets; + unsigned int nr_offsets; + struct ipr_data *ipr_data; + unsigned int nr_irqs; + struct irq_chip chip; +}; + +void register_ipr_controller(struct ipr_desc *); +void init_IRQ_ipr(void); + +/* + * Enable individual interrupt mode for external IPR IRQs. + */ +void ipr_irq_enable_irlm(void); + #endif /* __ASM_SH_HW_IRQ_H */ diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h index e81bf21c801e..c61d902b8bff 100644 --- a/include/asm-sh/irq.h +++ b/include/asm-sh/irq.h @@ -31,47 +31,7 @@ extern unsigned short *irq_mask_register; * PINT IRQs */ void init_IRQ_pint(void); - -/* - * The shift value is now the number of bits to shift, not the number of - * bits/4. This is to make it easier to read the value directly from the - * datasheets. The IPR address, addr, will be set from ipr_idx via the - * map_ipridx_to_addr function. - */ -struct ipr_data { - unsigned int irq; - int ipr_idx; /* Index for the IPR registered */ - int shift; /* Number of bits to shift the data */ - int priority; /* The priority */ - unsigned int addr; /* Address of Interrupt Priority Register */ -}; - -/* - * Given an IPR IDX, map the value to an IPR register address. - */ -unsigned int map_ipridx_to_addr(int idx); - -/* - * Enable individual interrupt mode for external IPR IRQs. - */ -void ipr_irq_enable_irlm(void); - -/* - * Function for "on chip support modules". - */ -void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs); void make_imask_irq(unsigned int irq); -void init_IRQ_ipr(void); - -struct intc2_data { - unsigned short irq; - unsigned char ipr_offset, ipr_shift; - unsigned char msk_offset, msk_shift; - unsigned char priority; -}; - -void make_intc2_irq(struct intc2_data *, unsigned int nr_irqs); -void init_IRQ_intc2(void); static inline int generic_irq_demux(int irq) { diff --git a/include/asm-sh/machvec.h b/include/asm-sh/machvec.h index 70389b72ffef..088698bacf2f 100644 --- a/include/asm-sh/machvec.h +++ b/include/asm-sh/machvec.h @@ -13,7 +13,6 @@ #include #include #include -#include struct device; @@ -68,4 +67,7 @@ extern struct sh_machine_vector sh_mv; #define get_system_type() sh_mv.mv_name +#define __initmv \ + __attribute_used__ __attribute__((__section__ (".machvec.init"))) + #endif /* _ASM_SH_MACHVEC_H */ diff --git a/include/asm-sh/machvec_init.h b/include/asm-sh/machvec_init.h deleted file mode 100644 index e397798ebd94..000000000000 --- a/include/asm-sh/machvec_init.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * include/asm-sh/machvec_init.h - * - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file has goodies to help simplify instantiation of machine vectors. - */ - -#ifndef __SH_MACHVEC_INIT_H -#define __SH_MACHVEC_INIT_H - - -/* - * In a GENERIC kernel, we have lots of these vectors floating about, - * all but one of which we want to go away. In a non-GENERIC kernel, - * we want only one, ever. - * - * Accomplish this in the GENERIC kernel by puting all of the vectors - * in the .init.data section where they'll go away. We'll copy the - * one we want to the real alpha_mv vector in setup_arch. - * - * Accomplish this in a non-GENERIC kernel by ifdef'ing out all but - * one of the vectors, which will not reside in .init.data. We then - * alias this one vector to alpha_mv, so no copy is needed. - * - * Upshot: set __initdata to nothing for non-GENERIC kernels. - * - * Note we do the same thing for the UNKNOWN kernel, as we need to write - * to the machine vector while setting it up. - */ - -#if defined(CONFIG_SH_GENERIC) || defined(CONFIG_SH_UNKNOWN) -#define __initmv __attribute__((unused,__section__ (".machvec.init"))) -#define ALIAS_MV(x) -#else -#define __initmv - -/* GCC actually has a syntax for defining aliases, but is under some - delusion that you shouldn't be able to declare it extern somewhere - else beforehand. Fine. We'll do it ourselves. */ -#if 0 -#define ALIAS_MV(system) \ - struct sh_machine_vector sh_mv __attribute__((alias("mv_"#system))); -#else -#define ALIAS_MV(system) \ - asm(".global sh_mv\nsh_mv = mv_"#system ); -#endif -#endif /* GENERIC */ - -#endif /* __SH_MACHVEC_INIT_H */ diff --git a/include/asm-sh/mmzone.h b/include/asm-sh/mmzone.h new file mode 100644 index 000000000000..7969f381dff2 --- /dev/null +++ b/include/asm-sh/mmzone.h @@ -0,0 +1,46 @@ +#ifndef __ASM_SH_MMZONE_H +#define __ASM_SH_MMZONE_H + +#ifdef __KERNEL__ + +#ifdef CONFIG_NEED_MULTIPLE_NODES +extern struct pglist_data *node_data[]; +#define NODE_DATA(nid) (node_data[nid]) + +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \ + NODE_DATA(nid)->node_spanned_pages) + +static inline int pfn_to_nid(unsigned long pfn) +{ + int nid; + + for (nid = 0; nid < MAX_NUMNODES; nid++) + if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid)) + break; + + return nid; +} + +static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn) +{ + return NODE_DATA(pfn_to_nid(pfn)); +} + +/* arch/sh/mm/numa.c */ +void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end); +#else +static inline void +setup_bootmem_node(int nid, unsigned long start, unsigned long end) +{ +} +#endif /* CONFIG_NEED_MULTIPLE_NODES */ + +/* Platform specific mem init */ +void __init plat_mem_setup(void); + +/* arch/sh/kernel/setup.c */ +void __init setup_bootmem_allocator(unsigned long start_pfn); + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_MMZONE_H */ diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index 7464de4ba07d..6bc9bba10105 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -60,6 +60,7 @@ extern void (*copy_page)(void *to, void *from); extern unsigned long shm_align_mask; extern unsigned long max_low_pfn, min_low_pfn; +extern unsigned long memory_start, memory_end; #ifdef CONFIG_MMU extern void clear_page_slow(void *to); @@ -134,7 +135,9 @@ typedef struct { unsigned long pgd; } pgd_t; #define PFN_START (__MEMORY_START >> PAGE_SHIFT) #define ARCH_PFN_OFFSET (PFN_START) #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#ifdef CONFIG_FLATMEM #define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn) +#endif #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ @@ -148,5 +151,12 @@ typedef struct { unsigned long pgd; } pgd_t; #define __HAVE_ARCH_GATE_AREA #endif +/* + * Slub defaults to 8-byte alignment, we're only interested in 4. + * Slab defaults to BYTES_PER_WORD, which ends up being the same anyways. + */ +#define ARCH_KMALLOC_MINALIGN 4 +#define ARCH_SLAB_MINALIGN 4 + #endif /* __KERNEL__ */ #endif /* __ASM_SH_PAGE_H */ diff --git a/include/asm-sh/parport.h b/include/asm-sh/parport.h new file mode 100644 index 000000000000..f67ba60a2acd --- /dev/null +++ b/include/asm-sh/parport.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + */ +#ifndef __ASM_SH_PARPORT_H +#define __ASM_SH_PARPORT_H + +static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); + +static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) +{ + return parport_pc_find_isa_ports(autoirq, autodma); +} + +#endif /* __ASM_SH_PARPORT_H */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index d42f68e724fa..2252e75daa26 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -36,7 +36,7 @@ */ enum cpu_type { /* SH-2 types */ - CPU_SH7604, CPU_SH7619, + CPU_SH7619, /* SH-2A types */ CPU_SH7206, @@ -52,7 +52,7 @@ enum cpu_type { CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501, /* SH-4A types */ - CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, + CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3, /* SH4AL-DSP types */ CPU_SH73180, CPU_SH7343, CPU_SH7722, @@ -228,11 +228,7 @@ static __inline__ void grab_fpu(struct pt_regs *regs) regs->sr &= ~SR_FD; } -#ifdef CONFIG_CPU_SH4 extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); -#else -#define save_fpu(tsk) do { } while (0) -#endif #define unlazy_fpu(tsk, regs) do { \ if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ diff --git a/include/asm-sh/rwsem.h b/include/asm-sh/rwsem.h index 4931ba817d73..1987f3ea7f1b 100644 --- a/include/asm-sh/rwsem.h +++ b/include/asm-sh/rwsem.h @@ -1,11 +1,15 @@ /* - * include/asm-ppc/rwsem.h: R/W semaphores for SH using the stuff + * include/asm-sh/rwsem.h: R/W semaphores for SH using the stuff * in lib/rwsem.c. */ #ifndef _ASM_SH_RWSEM_H #define _ASM_SH_RWSEM_H +#ifndef _LINUX_RWSEM_H +#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" +#endif + #ifdef __KERNEL__ #include #include diff --git a/include/asm-sh/saturn/io.h b/include/asm-sh/saturn/io.h deleted file mode 100644 index f1b9b5d633f4..000000000000 --- a/include/asm-sh/saturn/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-sh/saturn/io.h - * - * I/O functions for use on the Sega Saturn. - * - * Copyright (C) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - */ -#ifndef __ASM_SH_SATURN_IO_H -#define __ASM_SH_SATURN_IO_H - -/* arch/sh/boards/saturn/io.c */ -extern unsigned long saturn_isa_port2addr(unsigned long offset); -extern void *saturn_ioremap(unsigned long offset, unsigned long size); -extern void saturn_iounmap(void *addr); - -#endif /* __ASM_SH_SATURN_IO_H */ - diff --git a/include/asm-sh/saturn/smpc.h b/include/asm-sh/saturn/smpc.h deleted file mode 100644 index 5de5c12d6347..000000000000 --- a/include/asm-sh/saturn/smpc.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * include/asm-sh/saturn/smpc.h - * - * System Manager / Peripheral Control definitions. - * - * Copyright (C) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - */ -#ifndef __ASM_SH_SATURN_SMPC_H -#define __ASM_SH_SATURN_SMPC_H - -#include - -#define SMPC_COMMAND 0x2010001f /* SMPC command register */ -#define SMPC_RESULT 0x2010005f /* SMPC result register */ -#define SMPC_STATUS 0x20100063 /* SMPC status register */ - -#define SMPC_CMD_MSHON 0x0001 /* Master SH On */ -#define SMPC_CMD_SSHON 0x0002 /* Slave SH On */ -#define SMPC_CMD_SSHOFF 0x0003 /* Slave SH Off */ -#define SMPC_CMD_SNDON 0x0004 /* Sound On */ -#define SMPC_CMD_SNDOFF 0x0005 /* Sound Off */ -#define SMPC_CMD_CDON 0x0006 /* CD On */ -#define SMPC_CMD_CDOFF 0x0007 /* CD Off */ - -static inline void smpc_barrier(void) -{ - while ((ctrl_inb(SMPC_STATUS) & 0x0001) == 0x0001) - ; -} - -#endif /* __ASM_SH_SATURN_SMPC_H */ - diff --git a/include/asm-sh/sections.h b/include/asm-sh/sections.h index 57abd708b236..2a696b8ee4f5 100644 --- a/include/asm-sh/sections.h +++ b/include/asm-sh/sections.h @@ -3,7 +3,7 @@ #include -extern char _end[]; +extern long __machvec_start, __machvec_end; #endif /* __ASM_SH_SECTIONS_H */ diff --git a/include/asm-sh/setup.h b/include/asm-sh/setup.h index 1583c6b7bdaa..586a9711a75d 100644 --- a/include/asm-sh/setup.h +++ b/include/asm-sh/setup.h @@ -6,6 +6,7 @@ #ifdef __KERNEL__ int setup_early_printk(char *); +void sh_mv_setup(void); #endif /* __KERNEL__ */ diff --git a/include/asm-sh/sh03/io.h b/include/asm-sh/sh03/io.h index df3b187ef883..4ff1eb900301 100644 --- a/include/asm-sh/sh03/io.h +++ b/include/asm-sh/sh03/io.h @@ -14,22 +14,18 @@ #define INTC_IPRD 0xffd00010UL #define IRL0_IRQ 2 -#define IRL0_IPR_ADDR INTC_IPRD #define IRL0_IPR_POS 3 #define IRL0_PRIORITY 13 #define IRL1_IRQ 5 -#define IRL1_IPR_ADDR INTC_IPRD #define IRL1_IPR_POS 2 #define IRL1_PRIORITY 10 #define IRL2_IRQ 8 -#define IRL2_IPR_ADDR INTC_IPRD #define IRL2_IPR_POS 1 #define IRL2_PRIORITY 7 #define IRL3_IRQ 11 -#define IRL3_IPR_ADDR INTC_IPRD #define IRL3_IPR_POS 0 #define IRL3_PRIORITY 4 diff --git a/include/asm-sh/smp.h b/include/asm-sh/smp.h index caa7b93f1bce..b99ca786c0c1 100644 --- a/include/asm-sh/smp.h +++ b/include/asm-sh/smp.h @@ -39,4 +39,6 @@ extern struct smp_fn_call_struct smp_fn_call; #endif /* CONFIG_SMP */ +#define hard_smp_processor_id() (0) + #endif /* __ASM_SH_SMP_H */ diff --git a/include/asm-sh/snapgear.h b/include/asm-sh/snapgear.h index 2d712e72c9e5..3554e3a74e99 100644 --- a/include/asm-sh/snapgear.h +++ b/include/asm-sh/snapgear.h @@ -20,22 +20,18 @@ */ #define IRL0_IRQ 2 -#define IRL0_IPR_ADDR INTC_IPRD #define IRL0_IPR_POS 3 #define IRL0_PRIORITY 13 #define IRL1_IRQ 5 -#define IRL1_IPR_ADDR INTC_IPRD #define IRL1_IPR_POS 2 #define IRL1_PRIORITY 10 #define IRL2_IRQ 8 -#define IRL2_IPR_ADDR INTC_IPRD #define IRL2_IPR_POS 1 #define IRL2_PRIORITY 7 #define IRL3_IRQ 11 -#define IRL3_IPR_ADDR INTC_IPRD #define IRL3_IPR_POS 0 #define IRL3_PRIORITY 4 #endif diff --git a/include/asm-sh/sparsemem.h b/include/asm-sh/sparsemem.h new file mode 100644 index 000000000000..547a540b6667 --- /dev/null +++ b/include/asm-sh/sparsemem.h @@ -0,0 +1,16 @@ +#ifndef __ASM_SH_SPARSEMEM_H +#define __ASM_SH_SPARSEMEM_H + +#ifdef __KERNEL__ +/* + * SECTION_SIZE_BITS 2^N: how big each section will be + * MAX_PHYSADDR_BITS 2^N: how much physical address space we have + * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space + */ +#define SECTION_SIZE_BITS 26 +#define MAX_PHYSADDR_BITS 32 +#define MAX_PHYSMEM_BITS 32 + +#endif + +#endif /* __ASM_SH_SPARSEMEM_H */ diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 82f3e229e621..7c75045ae22b 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -8,9 +8,13 @@ #include #include +#include #include #include +struct task_struct *__switch_to(struct task_struct *prev, + struct task_struct *next); + /* * switch_to() should switch tasks to task nr n, first */ @@ -122,7 +126,7 @@ static inline void sched_cacheflush(void) #define smp_read_barrier_depends() do { } while(0) #endif -#define set_mb(var, value) do { xchg(&var, value); } while (0) +#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) /* * Jump to P2 area. @@ -271,6 +275,16 @@ extern unsigned int instruction_size(unsigned int insn); void disable_hlt(void); void enable_hlt(void); +void default_idle(void); + +asmlinkage void break_point_trap(void); +asmlinkage void debug_trap_handler(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs); +asmlinkage void bug_trap_handler(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs); + #define arch_align_stack(x) (x) #endif diff --git a/include/asm-sh/topology.h b/include/asm-sh/topology.h index cff001c316fe..f402a3b1cfa4 100644 --- a/include/asm-sh/topology.h +++ b/include/asm-sh/topology.h @@ -1,6 +1,36 @@ #ifndef _ASM_SH_TOPOLOGY_H #define _ASM_SH_TOPOLOGY_H +#ifdef CONFIG_NUMA + +/* sched_domains SD_NODE_INIT for sh machines */ +#define SD_NODE_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .child = NULL, \ + .groups = NULL, \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 2, \ + .busy_idx = 3, \ + .idle_idx = 2, \ + .newidle_idx = 0, \ + .wake_idx = 1, \ + .forkexec_idx = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_FORK \ + | SD_BALANCE_EXEC \ + | SD_SERIALIZE \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ + .nr_balance_failed = 0, \ +} + +#endif + #include #endif /* _ASM_SH_TOPOLOGY_H */ diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h index 5c49ed6715f2..f18a1a5c95c0 100644 --- a/include/asm-sh/uaccess.h +++ b/include/asm-sh/uaccess.h @@ -61,8 +61,6 @@ static inline void set_fs(mm_segment_t s) */ static inline int __access_ok(unsigned long addr, unsigned long size) { - extern unsigned long memory_start, memory_end; - return ((addr >= memory_start) && ((addr + size) < memory_end)); } #else /* CONFIG_MMU */ @@ -76,7 +74,7 @@ static inline int __access_ok(unsigned long addr, unsigned long size) * __access_ok: Check if address with size is OK or not. * * We do three checks: - * (1) is it user space? + * (1) is it user space? * (2) addr + size --> carry? * (3) addr + size >= 0x80000000 (PAGE_OFFSET) * @@ -142,11 +140,12 @@ static inline int access_ok(int type, const void __user *p, unsigned long size) __get_user_nocheck((x),(ptr),sizeof(*(ptr))) struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) +#define __m(x) (*(struct __large_struct __user *)(x)) #define __get_user_size(x,ptr,size,retval) \ do { \ retval = 0; \ + __chk_user_ptr(ptr); \ switch (size) { \ case 1: \ __get_user_asm(x, ptr, retval, "b"); \ @@ -175,6 +174,7 @@ do { \ #define __get_user_check(x,ptr,size) \ ({ \ long __gu_err, __gu_val; \ + __chk_user_ptr(ptr); \ switch (size) { \ case 1: \ __get_user_1(__gu_val, (ptr), __gu_err); \ @@ -300,6 +300,7 @@ extern void __get_user_unknown(void); #define __put_user_size(x,ptr,size,retval) \ do { \ retval = 0; \ + __chk_user_ptr(ptr); \ switch (size) { \ case 1: \ __put_user_asm(x, ptr, retval, "b"); \ @@ -328,7 +329,7 @@ do { \ #define __put_user_check(x,ptr,size) \ ({ \ long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ \ if (__access_ok((unsigned long)__pu_addr,size)) \ __put_user_size((x),__pu_addr,(size),__pu_err); \ @@ -406,10 +407,10 @@ __asm__ __volatile__( \ #endif extern void __put_user_unknown(void); - + /* Generic arbitrary sized copy. */ /* Return the number of bytes NOT copied */ -extern __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); +__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); #define copy_to_user(to,from,n) ({ \ void *__copy_to = (void *) (to); \ @@ -420,14 +421,6 @@ __copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \ } else __copy_res = __copy_size; \ __copy_res; }) -#define __copy_to_user(to,from,n) \ - __copy_user((void *)(to), \ - (void *)(from), n) - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - - #define copy_from_user(to,from,n) ({ \ void *__copy_to = (void *) (to); \ void *__copy_from = (void *) (from); \ @@ -438,9 +431,20 @@ __copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \ } else __copy_res = __copy_size; \ __copy_res; }) -#define __copy_from_user(to,from,n) \ - __copy_user((void *)(to), \ - (void *)(from), n) +static __always_inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __copy_user(to, (__force void *)from, n); +} + +static __always_inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __copy_user((__force void *)to, from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user /* * Clear the area and return remaining number of bytes diff --git a/include/asm-sh/ubc.h b/include/asm-sh/ubc.h index ae9bbdeefbe1..38d46e01b846 100644 --- a/include/asm-sh/ubc.h +++ b/include/asm-sh/ubc.h @@ -51,9 +51,14 @@ #define BRCR_UBDE (1 << 0) #ifndef __ASSEMBLY__ -/* arch/sh/kernel/ubc.S */ -extern void ubc_wakeup(void); +/* arch/sh/kernel/cpu/ubc.S */ extern void ubc_sleep(void); + +#ifdef CONFIG_UBC_WAKEUP +extern void ubc_wakeup(void); +#else +#define ubc_wakeup() do { } while (0) +#endif #endif #endif /* __KERNEL__ */ diff --git a/mm/Kconfig b/mm/Kconfig index 40559cfd49f7..086af703da43 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -117,7 +117,7 @@ config MEMORY_HOTPLUG bool "Allow for memory hot-add" depends on SPARSEMEM || X86_64_ACPI_NUMA depends on HOTPLUG && !SOFTWARE_SUSPEND && ARCH_ENABLE_MEMORY_HOTPLUG - depends on (IA64 || X86 || PPC64) + depends on (IA64 || X86 || PPC64 || SUPERH) comment "Memory hotplug is currently incompatible with Software Suspend" depends on SPARSEMEM && HOTPLUG && SOFTWARE_SUSPEND