From b90b925fd52c75ee7531df739d850a1f7c58ef06 Mon Sep 17 00:00:00 2001 From: Sameer Pujar Date: Wed, 19 Aug 2020 21:02:10 +0530 Subject: [PATCH] ALSA: hda: avoid reset of sdo_limit By default 'sdo_limit' is initialized with a default value of '8' as per spec. This is overridden in cases where a different value is required. However this is getting reset when snd_hdac_bus_init_chip() is called again, which happens during runtime PM cycle. Avoid this reset by moving 'sdo_limit' setup to 'snd_hdac_bus_init()' function which would be called only once. Fixes: 67ae482a59e9 ("ALSA: hda: add member to store ratio for stripe control") Cc: Signed-off-by: Sameer Pujar Link: https://lore.kernel.org/r/1597851130-6765-1-git-send-email-spujar@nvidia.com Signed-off-by: Takashi Iwai --- sound/hda/hdac_bus.c | 12 ++++++++++++ sound/hda/hdac_controller.c | 11 ----------- 2 files changed, 12 insertions(+), 11 deletions(-) diff --git a/sound/hda/hdac_bus.c b/sound/hda/hdac_bus.c index 09ddab5f5cae..9766f6af8743 100644 --- a/sound/hda/hdac_bus.c +++ b/sound/hda/hdac_bus.c @@ -46,6 +46,18 @@ int snd_hdac_bus_init(struct hdac_bus *bus, struct device *dev, INIT_LIST_HEAD(&bus->hlink_list); init_waitqueue_head(&bus->rirb_wq); bus->irq = -1; + + /* + * Default value of '8' is as per the HD audio specification (Rev 1.0a). + * Following relation is used to derive STRIPE control value. + * For sample rate <= 48K: + * { ((num_channels * bits_per_sample) / number of SDOs) >= 8 } + * For sample rate > 48K: + * { ((num_channels * bits_per_sample * rate/48000) / + * number of SDOs) >= 8 } + */ + bus->sdo_limit = 8; + return 0; } EXPORT_SYMBOL_GPL(snd_hdac_bus_init); diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c index 011b17cc1efa..b98449fd92f3 100644 --- a/sound/hda/hdac_controller.c +++ b/sound/hda/hdac_controller.c @@ -529,17 +529,6 @@ bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset) bus->chip_init = true; - /* - * Default value of '8' is as per the HD audio specification (Rev 1.0a). - * Following relation is used to derive STRIPE control value. - * For sample rate <= 48K: - * { ((num_channels * bits_per_sample) / number of SDOs) >= 8 } - * For sample rate > 48K: - * { ((num_channels * bits_per_sample * rate/48000) / - * number of SDOs) >= 8 } - */ - bus->sdo_limit = 8; - return true; } EXPORT_SYMBOL_GPL(snd_hdac_bus_init_chip);