thermal: exynos: Move register definitions from driver to data file
This patch migrates the TMU register definition/bitfields to data file. This is needed to support SoC's which use the same TMU controller but register validity, offsets or bitfield may slightly vary across SOC's. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
This commit is contained in:
Amit Daniel Kachhap
Eduardo Valentin
parent
bb34b4c8cf
commit
b8d582b940
|
|
@ -32,76 +32,6 @@
|
|||
#include "exynos_tmu.h"
|
||||
#include "exynos_tmu_data.h"
|
||||
|
||||
/* Exynos generic registers */
|
||||
#define EXYNOS_TMU_REG_TRIMINFO 0x0
|
||||
#define EXYNOS_TMU_REG_CONTROL 0x20
|
||||
#define EXYNOS_TMU_REG_STATUS 0x28
|
||||
#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40
|
||||
#define EXYNOS_TMU_REG_INTEN 0x70
|
||||
#define EXYNOS_TMU_REG_INTSTAT 0x74
|
||||
#define EXYNOS_TMU_REG_INTCLEAR 0x78
|
||||
|
||||
#define EXYNOS_TMU_TRIM_TEMP_MASK 0xff
|
||||
#define EXYNOS_TMU_GAIN_SHIFT 8
|
||||
#define EXYNOS_TMU_GAIN_MASK 0xf
|
||||
#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
|
||||
#define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f
|
||||
#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf
|
||||
#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
|
||||
#define EXYNOS_TMU_CORE_EN_SHIFT 0
|
||||
|
||||
/* Exynos4210 specific registers */
|
||||
#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
|
||||
#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
|
||||
#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54
|
||||
#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58
|
||||
#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C
|
||||
#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60
|
||||
#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64
|
||||
#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68
|
||||
#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C
|
||||
|
||||
#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1
|
||||
#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
|
||||
#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
|
||||
#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
|
||||
#define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111
|
||||
#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
|
||||
|
||||
/* Exynos5250 and Exynos4412 specific registers */
|
||||
#define EXYNOS_TMU_TRIMINFO_CON 0x14
|
||||
#define EXYNOS_THD_TEMP_RISE 0x50
|
||||
#define EXYNOS_THD_TEMP_FALL 0x54
|
||||
#define EXYNOS_EMUL_CON 0x80
|
||||
|
||||
#define EXYNOS_TRIMINFO_RELOAD 0x1
|
||||
#define EXYNOS_TRIMINFO_SHIFT 0x0
|
||||
#define EXYNOS_TMU_RISE_INT_MASK 0x111
|
||||
#define EXYNOS_TMU_RISE_INT_SHIFT 0
|
||||
#define EXYNOS_TMU_FALL_INT_MASK 0x111
|
||||
#define EXYNOS_TMU_FALL_INT_SHIFT 12
|
||||
#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
|
||||
#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
|
||||
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
|
||||
#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
|
||||
|
||||
#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
|
||||
#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
|
||||
#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
|
||||
#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
|
||||
#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
|
||||
#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20
|
||||
#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24
|
||||
|
||||
#ifdef CONFIG_THERMAL_EMULATION
|
||||
#define EXYNOS_EMUL_TIME 0x57F0
|
||||
#define EXYNOS_EMUL_TIME_MASK 0xffff
|
||||
#define EXYNOS_EMUL_TIME_SHIFT 16
|
||||
#define EXYNOS_EMUL_DATA_SHIFT 8
|
||||
#define EXYNOS_EMUL_DATA_MASK 0xFF
|
||||
#define EXYNOS_EMUL_ENABLE 0x1
|
||||
#endif /* CONFIG_THERMAL_EMULATION */
|
||||
|
||||
struct exynos_tmu_data {
|
||||
struct exynos_tmu_platform_data *pdata;
|
||||
struct resource *mem;
|
||||
|
|
@ -186,6 +116,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
|
|||
{
|
||||
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
|
||||
struct exynos_tmu_platform_data *pdata = data->pdata;
|
||||
const struct exynos_tmu_registers *reg = pdata->registers;
|
||||
unsigned int status, trim_info;
|
||||
unsigned int rising_threshold = 0, falling_threshold = 0;
|
||||
int ret = 0, threshold_code, i, trigger_levs = 0;
|
||||
|
|
@ -193,20 +124,20 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
|
|||
mutex_lock(&data->lock);
|
||||
clk_enable(data->clk);
|
||||
|
||||
status = readb(data->base + EXYNOS_TMU_REG_STATUS);
|
||||
status = readb(data->base + reg->tmu_status);
|
||||
if (!status) {
|
||||
ret = -EBUSY;
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (data->soc == SOC_ARCH_EXYNOS) {
|
||||
__raw_writel(EXYNOS_TRIMINFO_RELOAD,
|
||||
data->base + EXYNOS_TMU_TRIMINFO_CON);
|
||||
}
|
||||
if (data->soc == SOC_ARCH_EXYNOS)
|
||||
__raw_writel(1, data->base + reg->triminfo_ctrl);
|
||||
|
||||
/* Save trimming info in order to perform calibration */
|
||||
trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
|
||||
data->temp_error1 = trim_info & EXYNOS_TMU_TRIM_TEMP_MASK;
|
||||
data->temp_error2 = ((trim_info >> 8) & EXYNOS_TMU_TRIM_TEMP_MASK);
|
||||
trim_info = readl(data->base + reg->triminfo_data);
|
||||
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
|
||||
data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
|
||||
EXYNOS_TMU_TEMP_MASK);
|
||||
|
||||
if ((pdata->min_efuse_value > data->temp_error1) ||
|
||||
(data->temp_error1 > pdata->max_efuse_value) ||
|
||||
|
|
@ -226,13 +157,12 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
|
|||
goto out;
|
||||
}
|
||||
writeb(threshold_code,
|
||||
data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
|
||||
data->base + reg->threshold_temp);
|
||||
for (i = 0; i < trigger_levs; i++)
|
||||
writeb(pdata->trigger_levels[i],
|
||||
data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
|
||||
writeb(pdata->trigger_levels[i], data->base +
|
||||
reg->threshold_th0 + i * sizeof(reg->threshold_th0));
|
||||
|
||||
writel(EXYNOS4210_TMU_INTCLEAR_VAL,
|
||||
data->base + EXYNOS_TMU_REG_INTCLEAR);
|
||||
writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
|
||||
} else if (data->soc == SOC_ARCH_EXYNOS) {
|
||||
/* Write temperature code for rising and falling threshold */
|
||||
for (i = 0; i < trigger_levs; i++) {
|
||||
|
|
@ -254,12 +184,13 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
|
|||
}
|
||||
|
||||
writel(rising_threshold,
|
||||
data->base + EXYNOS_THD_TEMP_RISE);
|
||||
data->base + reg->threshold_th0);
|
||||
writel(falling_threshold,
|
||||
data->base + EXYNOS_THD_TEMP_FALL);
|
||||
data->base + reg->threshold_th1);
|
||||
|
||||
writel(EXYNOS_TMU_CLEAR_RISE_INT | EXYNOS_TMU_CLEAR_FALL_INT,
|
||||
data->base + EXYNOS_TMU_REG_INTCLEAR);
|
||||
writel((reg->inten_rise_mask << reg->inten_rise_shift) |
|
||||
(reg->inten_fall_mask << reg->inten_fall_shift),
|
||||
data->base + reg->tmu_intclear);
|
||||
}
|
||||
out:
|
||||
clk_disable(data->clk);
|
||||
|
|
@ -272,46 +203,46 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
|
|||
{
|
||||
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
|
||||
struct exynos_tmu_platform_data *pdata = data->pdata;
|
||||
const struct exynos_tmu_registers *reg = pdata->registers;
|
||||
unsigned int con, interrupt_en;
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
clk_enable(data->clk);
|
||||
|
||||
con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
|
||||
con = readl(data->base + reg->tmu_ctrl);
|
||||
|
||||
if (pdata->reference_voltage) {
|
||||
con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK <<
|
||||
EXYNOS_TMU_REF_VOLTAGE_SHIFT);
|
||||
con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
|
||||
con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
|
||||
con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
|
||||
}
|
||||
|
||||
if (pdata->gain) {
|
||||
con &= ~(EXYNOS_TMU_GAIN_MASK << EXYNOS_TMU_GAIN_SHIFT);
|
||||
con |= (pdata->gain << EXYNOS_TMU_GAIN_SHIFT);
|
||||
con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
|
||||
con |= (pdata->gain << reg->buf_slope_sel_shift);
|
||||
}
|
||||
|
||||
if (pdata->noise_cancel_mode) {
|
||||
con &= ~(EXYNOS_TMU_TRIP_MODE_MASK <<
|
||||
EXYNOS_TMU_TRIP_MODE_SHIFT);
|
||||
con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT);
|
||||
con &= ~(reg->therm_trip_mode_mask <<
|
||||
reg->therm_trip_mode_shift);
|
||||
con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
|
||||
}
|
||||
|
||||
if (on) {
|
||||
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
|
||||
con |= (1 << reg->core_en_shift);
|
||||
interrupt_en =
|
||||
pdata->trigger_enable[3] << EXYNOS_TMU_INTEN_RISE3_SHIFT |
|
||||
pdata->trigger_enable[2] << EXYNOS_TMU_INTEN_RISE2_SHIFT |
|
||||
pdata->trigger_enable[1] << EXYNOS_TMU_INTEN_RISE1_SHIFT |
|
||||
pdata->trigger_enable[0] << EXYNOS_TMU_INTEN_RISE0_SHIFT;
|
||||
pdata->trigger_enable[3] << reg->inten_rise3_shift |
|
||||
pdata->trigger_enable[2] << reg->inten_rise2_shift |
|
||||
pdata->trigger_enable[1] << reg->inten_rise1_shift |
|
||||
pdata->trigger_enable[0] << reg->inten_rise0_shift;
|
||||
if (pdata->threshold_falling)
|
||||
interrupt_en |=
|
||||
interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
|
||||
interrupt_en << reg->inten_fall0_shift;
|
||||
} else {
|
||||
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
|
||||
con &= ~(1 << reg->core_en_shift);
|
||||
interrupt_en = 0; /* Disable all interrupts */
|
||||
}
|
||||
writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
|
||||
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
|
||||
writel(interrupt_en, data->base + reg->tmu_inten);
|
||||
writel(con, data->base + reg->tmu_ctrl);
|
||||
|
||||
clk_disable(data->clk);
|
||||
mutex_unlock(&data->lock);
|
||||
|
|
@ -319,13 +250,15 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
|
|||
|
||||
static int exynos_tmu_read(struct exynos_tmu_data *data)
|
||||
{
|
||||
struct exynos_tmu_platform_data *pdata = data->pdata;
|
||||
const struct exynos_tmu_registers *reg = pdata->registers;
|
||||
u8 temp_code;
|
||||
int temp;
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
clk_enable(data->clk);
|
||||
|
||||
temp_code = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
|
||||
temp_code = readb(data->base + reg->tmu_cur_temp);
|
||||
temp = code_to_temp(data, temp_code);
|
||||
|
||||
clk_disable(data->clk);
|
||||
|
|
@ -338,7 +271,9 @@ static int exynos_tmu_read(struct exynos_tmu_data *data)
|
|||
static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
|
||||
{
|
||||
struct exynos_tmu_data *data = drv_data;
|
||||
unsigned int reg;
|
||||
struct exynos_tmu_platform_data *pdata = data->pdata;
|
||||
const struct exynos_tmu_registers *reg = pdata->registers;
|
||||
unsigned int val;
|
||||
int ret = -EINVAL;
|
||||
|
||||
if (data->soc == SOC_ARCH_EXYNOS4210)
|
||||
|
|
@ -350,19 +285,19 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
|
|||
mutex_lock(&data->lock);
|
||||
clk_enable(data->clk);
|
||||
|
||||
reg = readl(data->base + EXYNOS_EMUL_CON);
|
||||
val = readl(data->base + reg->emul_con);
|
||||
|
||||
if (temp) {
|
||||
temp /= MCELSIUS;
|
||||
|
||||
reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) |
|
||||
val = (EXYNOS_EMUL_TIME << reg->emul_time_shift) |
|
||||
(temp_to_code(data, temp)
|
||||
<< EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE;
|
||||
<< reg->emul_temp_shift) | EXYNOS_EMUL_ENABLE;
|
||||
} else {
|
||||
reg &= ~EXYNOS_EMUL_ENABLE;
|
||||
val &= ~EXYNOS_EMUL_ENABLE;
|
||||
}
|
||||
|
||||
writel(reg, data->base + EXYNOS_EMUL_CON);
|
||||
writel(val, data->base + reg->emul_con);
|
||||
|
||||
clk_disable(data->clk);
|
||||
mutex_unlock(&data->lock);
|
||||
|
|
@ -379,17 +314,20 @@ static void exynos_tmu_work(struct work_struct *work)
|
|||
{
|
||||
struct exynos_tmu_data *data = container_of(work,
|
||||
struct exynos_tmu_data, irq_work);
|
||||
struct exynos_tmu_platform_data *pdata = data->pdata;
|
||||
const struct exynos_tmu_registers *reg = pdata->registers;
|
||||
|
||||
exynos_report_trigger();
|
||||
mutex_lock(&data->lock);
|
||||
clk_enable(data->clk);
|
||||
|
||||
if (data->soc == SOC_ARCH_EXYNOS)
|
||||
writel(EXYNOS_TMU_CLEAR_RISE_INT |
|
||||
EXYNOS_TMU_CLEAR_FALL_INT,
|
||||
data->base + EXYNOS_TMU_REG_INTCLEAR);
|
||||
writel((reg->inten_rise_mask << reg->inten_rise_shift) |
|
||||
(reg->inten_fall_mask << reg->inten_fall_shift),
|
||||
data->base + reg->tmu_intclear);
|
||||
else
|
||||
writel(EXYNOS4210_TMU_INTCLEAR_VAL,
|
||||
data->base + EXYNOS_TMU_REG_INTCLEAR);
|
||||
writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
|
||||
|
||||
clk_disable(data->clk);
|
||||
mutex_unlock(&data->lock);
|
||||
|
||||
|
|
|
|||
|
|
@ -42,6 +42,136 @@ enum soc_type {
|
|||
SOC_ARCH_EXYNOS,
|
||||
};
|
||||
|
||||
/**
|
||||
* struct exynos_tmu_register - register descriptors to access registers and
|
||||
* bitfields. The register validity, offsets and bitfield values may vary
|
||||
* slightly across different exynos SOC's.
|
||||
* @triminfo_data: register containing 2 pont trimming data
|
||||
* @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
|
||||
* @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
|
||||
* @triminfo_ctrl: trim info controller register.
|
||||
* @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
|
||||
reg.
|
||||
* @tmu_ctrl: TMU main controller register.
|
||||
* @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
|
||||
* @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register.
|
||||
* @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
|
||||
* @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register.
|
||||
* @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register.
|
||||
* @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl
|
||||
register.
|
||||
* @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register.
|
||||
* @therm_trip_tq_en_shift: shift bits of thermal trip enable by TQ pin in
|
||||
tmu_ctrl register.
|
||||
* @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register.
|
||||
* @tmu_status: register drescribing the TMU status.
|
||||
* @tmu_cur_temp: register containing the current temperature of the TMU.
|
||||
* @tmu_cur_temp_shift: shift bits of current temp value in tmu_cur_temp
|
||||
register.
|
||||
* @threshold_temp: register containing the base threshold level.
|
||||
* @threshold_th0: Register containing first set of rising levels.
|
||||
* @threshold_th0_l0_shift: shift bits of level0 threshold temperature.
|
||||
* @threshold_th0_l1_shift: shift bits of level1 threshold temperature.
|
||||
* @threshold_th0_l2_shift: shift bits of level2 threshold temperature.
|
||||
* @threshold_th0_l3_shift: shift bits of level3 threshold temperature.
|
||||
* @threshold_th1: Register containing second set of rising levels.
|
||||
* @threshold_th1_l0_shift: shift bits of level0 threshold temperature.
|
||||
* @threshold_th1_l1_shift: shift bits of level1 threshold temperature.
|
||||
* @threshold_th1_l2_shift: shift bits of level2 threshold temperature.
|
||||
* @threshold_th1_l3_shift: shift bits of level3 threshold temperature.
|
||||
* @threshold_th2: Register containing third set of rising levels.
|
||||
* @threshold_th2_l0_shift: shift bits of level0 threshold temperature.
|
||||
* @threshold_th3: Register containing fourth set of rising levels.
|
||||
* @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
|
||||
* @tmu_inten: register containing the different threshold interrupt
|
||||
enable bits.
|
||||
* @inten_rise_shift: shift bits of all rising interrupt bits.
|
||||
* @inten_rise_mask: mask bits of all rising interrupt bits.
|
||||
* @inten_fall_shift: shift bits of all rising interrupt bits.
|
||||
* @inten_fall_mask: mask bits of all rising interrupt bits.
|
||||
* @inten_rise0_shift: shift bits of rising 0 interrupt bits.
|
||||
* @inten_rise1_shift: shift bits of rising 1 interrupt bits.
|
||||
* @inten_rise2_shift: shift bits of rising 2 interrupt bits.
|
||||
* @inten_rise3_shift: shift bits of rising 3 interrupt bits.
|
||||
* @inten_fall0_shift: shift bits of falling 0 interrupt bits.
|
||||
* @inten_fall1_shift: shift bits of falling 1 interrupt bits.
|
||||
* @inten_fall2_shift: shift bits of falling 2 interrupt bits.
|
||||
* @inten_fall3_shift: shift bits of falling 3 interrupt bits.
|
||||
* @tmu_intstat: Register containing the interrupt status values.
|
||||
* @tmu_intclear: Register for clearing the raised interrupt status.
|
||||
* @emul_con: TMU emulation controller register.
|
||||
* @emul_temp_shift: shift bits of emulation temperature.
|
||||
* @emul_time_shift: shift bits of emulation time.
|
||||
* @emul_time_mask: mask bits of emulation time.
|
||||
*/
|
||||
struct exynos_tmu_registers {
|
||||
u32 triminfo_data;
|
||||
u32 triminfo_25_shift;
|
||||
u32 triminfo_85_shift;
|
||||
|
||||
u32 triminfo_ctrl;
|
||||
u32 triminfo_reload_shift;
|
||||
|
||||
u32 tmu_ctrl;
|
||||
u32 buf_vref_sel_shift;
|
||||
u32 buf_vref_sel_mask;
|
||||
u32 therm_trip_mode_shift;
|
||||
u32 therm_trip_mode_mask;
|
||||
u32 therm_trip_en_shift;
|
||||
u32 buf_slope_sel_shift;
|
||||
u32 buf_slope_sel_mask;
|
||||
u32 therm_trip_tq_en_shift;
|
||||
u32 core_en_shift;
|
||||
|
||||
u32 tmu_status;
|
||||
|
||||
u32 tmu_cur_temp;
|
||||
u32 tmu_cur_temp_shift;
|
||||
|
||||
u32 threshold_temp;
|
||||
|
||||
u32 threshold_th0;
|
||||
u32 threshold_th0_l0_shift;
|
||||
u32 threshold_th0_l1_shift;
|
||||
u32 threshold_th0_l2_shift;
|
||||
u32 threshold_th0_l3_shift;
|
||||
|
||||
u32 threshold_th1;
|
||||
u32 threshold_th1_l0_shift;
|
||||
u32 threshold_th1_l1_shift;
|
||||
u32 threshold_th1_l2_shift;
|
||||
u32 threshold_th1_l3_shift;
|
||||
|
||||
u32 threshold_th2;
|
||||
u32 threshold_th2_l0_shift;
|
||||
|
||||
u32 threshold_th3;
|
||||
u32 threshold_th3_l0_shift;
|
||||
|
||||
u32 tmu_inten;
|
||||
u32 inten_rise_shift;
|
||||
u32 inten_rise_mask;
|
||||
u32 inten_fall_shift;
|
||||
u32 inten_fall_mask;
|
||||
u32 inten_rise0_shift;
|
||||
u32 inten_rise1_shift;
|
||||
u32 inten_rise2_shift;
|
||||
u32 inten_rise3_shift;
|
||||
u32 inten_fall0_shift;
|
||||
u32 inten_fall1_shift;
|
||||
u32 inten_fall2_shift;
|
||||
u32 inten_fall3_shift;
|
||||
|
||||
u32 tmu_intstat;
|
||||
|
||||
u32 tmu_intclear;
|
||||
|
||||
u32 emul_con;
|
||||
u32 emul_temp_shift;
|
||||
u32 emul_time_shift;
|
||||
u32 emul_time_mask;
|
||||
};
|
||||
|
||||
/**
|
||||
* struct exynos_tmu_platform_data
|
||||
* @threshold: basic temperature for generating interrupt
|
||||
|
|
@ -90,6 +220,8 @@ enum soc_type {
|
|||
* @freq_clip_table: Table representing frequency reduction percentage.
|
||||
* @freq_tab_count: Count of the above table as frequency reduction may
|
||||
* applicable to only some of the trigger levels.
|
||||
* @registers: Pointer to structure containing all the TMU controller registers
|
||||
* and bitfields shifts and masks.
|
||||
*
|
||||
* This structure is required for configuration of exynos_tmu driver.
|
||||
*/
|
||||
|
|
@ -116,5 +248,6 @@ struct exynos_tmu_platform_data {
|
|||
enum soc_type type;
|
||||
struct freq_clip_table freq_tab[4];
|
||||
unsigned int freq_tab_count;
|
||||
const struct exynos_tmu_registers *registers;
|
||||
};
|
||||
#endif /* _EXYNOS_TMU_H */
|
||||
|
|
|
|||
|
|
@ -25,6 +25,28 @@
|
|||
#include "exynos_tmu_data.h"
|
||||
|
||||
#if defined(CONFIG_CPU_EXYNOS4210)
|
||||
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
|
||||
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
|
||||
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
|
||||
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
|
||||
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
|
||||
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
|
||||
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
|
||||
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
|
||||
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
|
||||
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
|
||||
.tmu_status = EXYNOS_TMU_REG_STATUS,
|
||||
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
|
||||
.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
|
||||
.threshold_th0 = EXYNOS4210_TMU_REG_TRIG_LEVEL0,
|
||||
.tmu_inten = EXYNOS_TMU_REG_INTEN,
|
||||
.inten_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
|
||||
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
|
||||
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
|
||||
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
|
||||
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
|
||||
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
|
||||
};
|
||||
struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
|
||||
.threshold = 80,
|
||||
.trigger_levels[0] = 5,
|
||||
|
|
@ -56,10 +78,46 @@ struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
|
|||
},
|
||||
.freq_tab_count = 2,
|
||||
.type = SOC_ARCH_EXYNOS4210,
|
||||
.registers = &exynos4210_tmu_registers,
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
|
||||
static const struct exynos_tmu_registers exynos5250_tmu_registers = {
|
||||
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
|
||||
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
|
||||
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
|
||||
.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
|
||||
.triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
|
||||
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
|
||||
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
|
||||
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
|
||||
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
|
||||
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
|
||||
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
|
||||
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
|
||||
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
|
||||
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
|
||||
.tmu_status = EXYNOS_TMU_REG_STATUS,
|
||||
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
|
||||
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
|
||||
.threshold_th1 = EXYNOS_THD_TEMP_FALL,
|
||||
.tmu_inten = EXYNOS_TMU_REG_INTEN,
|
||||
.inten_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
|
||||
.inten_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
|
||||
.inten_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
|
||||
.inten_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT,
|
||||
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
|
||||
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
|
||||
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
|
||||
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
|
||||
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
|
||||
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
|
||||
.emul_con = EXYNOS_EMUL_CON,
|
||||
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
|
||||
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
|
||||
.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
|
||||
};
|
||||
struct exynos_tmu_platform_data const exynos5250_default_tmu_data = {
|
||||
.threshold_falling = 10,
|
||||
.trigger_levels[0] = 85,
|
||||
|
|
@ -93,5 +151,6 @@ struct exynos_tmu_platform_data const exynos5250_default_tmu_data = {
|
|||
},
|
||||
.freq_tab_count = 2,
|
||||
.type = SOC_ARCH_EXYNOS,
|
||||
.registers = &exynos5250_tmu_registers,
|
||||
};
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -23,6 +23,74 @@
|
|||
#ifndef _EXYNOS_TMU_DATA_H
|
||||
#define _EXYNOS_TMU_DATA_H
|
||||
|
||||
/* Exynos generic registers */
|
||||
#define EXYNOS_TMU_REG_TRIMINFO 0x0
|
||||
#define EXYNOS_TMU_REG_CONTROL 0x20
|
||||
#define EXYNOS_TMU_REG_STATUS 0x28
|
||||
#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40
|
||||
#define EXYNOS_TMU_REG_INTEN 0x70
|
||||
#define EXYNOS_TMU_REG_INTSTAT 0x74
|
||||
#define EXYNOS_TMU_REG_INTCLEAR 0x78
|
||||
|
||||
#define EXYNOS_TMU_TEMP_MASK 0xff
|
||||
#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
|
||||
#define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f
|
||||
#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf
|
||||
#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
|
||||
#define EXYNOS_TMU_CORE_EN_SHIFT 0
|
||||
|
||||
/* Exynos4210 specific registers */
|
||||
#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
|
||||
#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
|
||||
#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54
|
||||
#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58
|
||||
#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C
|
||||
#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60
|
||||
#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64
|
||||
#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68
|
||||
#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C
|
||||
|
||||
#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1
|
||||
#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
|
||||
#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
|
||||
#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
|
||||
#define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111
|
||||
#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
|
||||
|
||||
/* Exynos5250 and Exynos4412 specific registers */
|
||||
#define EXYNOS_TMU_TRIMINFO_CON 0x14
|
||||
#define EXYNOS_THD_TEMP_RISE 0x50
|
||||
#define EXYNOS_THD_TEMP_FALL 0x54
|
||||
#define EXYNOS_EMUL_CON 0x80
|
||||
|
||||
#define EXYNOS_TRIMINFO_RELOAD_SHIFT 1
|
||||
#define EXYNOS_TRIMINFO_25_SHIFT 0
|
||||
#define EXYNOS_TRIMINFO_85_SHIFT 8
|
||||
#define EXYNOS_TMU_RISE_INT_MASK 0x111
|
||||
#define EXYNOS_TMU_RISE_INT_SHIFT 0
|
||||
#define EXYNOS_TMU_FALL_INT_MASK 0x111
|
||||
#define EXYNOS_TMU_FALL_INT_SHIFT 12
|
||||
#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
|
||||
#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
|
||||
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
|
||||
#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
|
||||
#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
|
||||
|
||||
#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
|
||||
#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
|
||||
#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
|
||||
#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
|
||||
#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
|
||||
#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20
|
||||
#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24
|
||||
|
||||
#define EXYNOS_EMUL_TIME 0x57F0
|
||||
#define EXYNOS_EMUL_TIME_MASK 0xffff
|
||||
#define EXYNOS_EMUL_TIME_SHIFT 16
|
||||
#define EXYNOS_EMUL_DATA_SHIFT 8
|
||||
#define EXYNOS_EMUL_DATA_MASK 0xFF
|
||||
#define EXYNOS_EMUL_ENABLE 0x1
|
||||
|
||||
#if defined(CONFIG_CPU_EXYNOS4210)
|
||||
extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data;
|
||||
#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
|
||||
|
|
|
|||
Loading…
Reference in New Issue