V4L/DVB (3934): Support new dvb-ttusb-budget boards with stv0297
Added config switch to stv0297 to control i2c STOP during write behaviour. Update frontend init in dvb-ttusb-budget. Enable i2c STOP on other users of stv0297. Signed-off-by: Thomas Kaiser <linux-dvb AT kaiser-linux.li> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
parent
21c2858235
commit
b8d4c235d5
|
@ -68,12 +68,12 @@ static int stv0297_readreg(struct stv0297_state *state, u8 reg)
|
|||
int ret;
|
||||
u8 b0[] = { reg };
|
||||
u8 b1[] = { 0 };
|
||||
struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len =
|
||||
1},
|
||||
struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 1},
|
||||
{.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1}
|
||||
};
|
||||
|
||||
// this device needs a STOP between the register and data
|
||||
if (state->config->stop_during_read) {
|
||||
if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) {
|
||||
dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret);
|
||||
return -1;
|
||||
|
@ -82,6 +82,12 @@ static int stv0297_readreg(struct stv0297_state *state, u8 reg)
|
|||
dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret);
|
||||
return -1;
|
||||
}
|
||||
} else {
|
||||
if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
|
||||
dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret);
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
return b1[0];
|
||||
}
|
||||
|
@ -107,6 +113,7 @@ static int stv0297_readregs(struct stv0297_state *state, u8 reg1, u8 * b, u8 len
|
|||
};
|
||||
|
||||
// this device needs a STOP between the register and data
|
||||
if (state->config->stop_during_read) {
|
||||
if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) {
|
||||
dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret);
|
||||
return -1;
|
||||
|
@ -115,6 +122,12 @@ static int stv0297_readregs(struct stv0297_state *state, u8 reg1, u8 * b, u8 len
|
|||
dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret);
|
||||
return -1;
|
||||
}
|
||||
} else {
|
||||
if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
|
||||
dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret);
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
|
@ -37,6 +37,9 @@ struct stv0297_config
|
|||
|
||||
/* does the "inversion" need inverted? */
|
||||
u8 invert:1;
|
||||
|
||||
/* set to 1 if the device requires an i2c STOP during reading */
|
||||
u8 stop_during_read:1;
|
||||
};
|
||||
|
||||
extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config,
|
||||
|
|
|
@ -1859,6 +1859,7 @@ static struct stv0297_config nexusca_stv0297_config = {
|
|||
.demod_address = 0x1C,
|
||||
.inittab = nexusca_stv0297_inittab,
|
||||
.invert = 1,
|
||||
.stop_during_read = 1,
|
||||
};
|
||||
|
||||
|
||||
|
|
|
@ -977,6 +977,7 @@ static struct stv0297_config dvbc_philips_tdm1316l_config = {
|
|||
.demod_address = 0x1c,
|
||||
.inittab = dvbc_philips_tdm1316l_inittab,
|
||||
.invert = 0,
|
||||
.stop_during_read = 1,
|
||||
};
|
||||
|
||||
|
||||
|
|
|
@ -6,6 +6,7 @@ config DVB_TTUSB_BUDGET
|
|||
select DVB_VES1820
|
||||
select DVB_TDA8083
|
||||
select DVB_STV0299
|
||||
select DVB_STV0297
|
||||
select DVB_LNBP21
|
||||
help
|
||||
Support for external USB adapters designed by Technotrend and
|
||||
|
|
|
@ -30,6 +30,7 @@
|
|||
#include "tda1004x.h"
|
||||
#include "stv0299.h"
|
||||
#include "tda8083.h"
|
||||
#include "stv0297.h"
|
||||
#include "lnbp21.h"
|
||||
|
||||
#include <linux/dvb/frontend.h>
|
||||
|
@ -1380,6 +1381,174 @@ static u8 read_pwm(struct ttusb* ttusb)
|
|||
}
|
||||
|
||||
|
||||
static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
||||
{
|
||||
struct ttusb *ttusb = (struct ttusb *) fe->dvb->priv;
|
||||
u8 tuner_buf[5];
|
||||
struct i2c_msg tuner_msg = {.addr = 0x60,
|
||||
.flags = 0,
|
||||
.buf = tuner_buf,
|
||||
.len = sizeof(tuner_buf) };
|
||||
int tuner_frequency = 0;
|
||||
u8 band, cp, filter;
|
||||
|
||||
// determine charge pump
|
||||
tuner_frequency = params->frequency;
|
||||
if (tuner_frequency < 87000000) {return -EINVAL;}
|
||||
else if (tuner_frequency < 130000000) {cp = 3; band = 1;}
|
||||
else if (tuner_frequency < 160000000) {cp = 5; band = 1;}
|
||||
else if (tuner_frequency < 200000000) {cp = 6; band = 1;}
|
||||
else if (tuner_frequency < 290000000) {cp = 3; band = 2;}
|
||||
else if (tuner_frequency < 420000000) {cp = 5; band = 2;}
|
||||
else if (tuner_frequency < 480000000) {cp = 6; band = 2;}
|
||||
else if (tuner_frequency < 620000000) {cp = 3; band = 4;}
|
||||
else if (tuner_frequency < 830000000) {cp = 5; band = 4;}
|
||||
else if (tuner_frequency < 895000000) {cp = 7; band = 4;}
|
||||
else {return -EINVAL;}
|
||||
|
||||
// assume PLL filter should always be 8MHz for the moment.
|
||||
filter = 1;
|
||||
|
||||
// calculate divisor
|
||||
// (Finput + Fif)/Fref; Fif = 36125000 Hz, Fref = 62500 Hz
|
||||
tuner_frequency = ((params->frequency + 36125000) / 62500);
|
||||
|
||||
// setup tuner buffer
|
||||
tuner_buf[0] = tuner_frequency >> 8;
|
||||
tuner_buf[1] = tuner_frequency & 0xff;
|
||||
tuner_buf[2] = 0xc8;
|
||||
tuner_buf[3] = (cp << 5) | (filter << 3) | band;
|
||||
tuner_buf[4] = 0x80;
|
||||
|
||||
if (fe->ops->i2c_gate_ctrl)
|
||||
fe->ops->i2c_gate_ctrl(fe, 1);
|
||||
if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) {
|
||||
printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 1\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
msleep(50);
|
||||
|
||||
if (fe->ops->i2c_gate_ctrl)
|
||||
fe->ops->i2c_gate_ctrl(fe, 1);
|
||||
if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) {
|
||||
printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 2\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
msleep(1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static u8 dvbc_philips_tdm1316l_inittab[] = {
|
||||
0x80, 0x21,
|
||||
0x80, 0x20,
|
||||
0x81, 0x01,
|
||||
0x81, 0x00,
|
||||
0x00, 0x09,
|
||||
0x01, 0x69,
|
||||
0x03, 0x00,
|
||||
0x04, 0x00,
|
||||
0x07, 0x00,
|
||||
0x08, 0x00,
|
||||
0x20, 0x00,
|
||||
0x21, 0x40,
|
||||
0x22, 0x00,
|
||||
0x23, 0x00,
|
||||
0x24, 0x40,
|
||||
0x25, 0x88,
|
||||
0x30, 0xff,
|
||||
0x31, 0x00,
|
||||
0x32, 0xff,
|
||||
0x33, 0x00,
|
||||
0x34, 0x50,
|
||||
0x35, 0x7f,
|
||||
0x36, 0x00,
|
||||
0x37, 0x20,
|
||||
0x38, 0x00,
|
||||
0x40, 0x1c,
|
||||
0x41, 0xff,
|
||||
0x42, 0x29,
|
||||
0x43, 0x20,
|
||||
0x44, 0xff,
|
||||
0x45, 0x00,
|
||||
0x46, 0x00,
|
||||
0x49, 0x04,
|
||||
0x4a, 0xff,
|
||||
0x4b, 0x7f,
|
||||
0x52, 0x30,
|
||||
0x55, 0xae,
|
||||
0x56, 0x47,
|
||||
0x57, 0xe1,
|
||||
0x58, 0x3a,
|
||||
0x5a, 0x1e,
|
||||
0x5b, 0x34,
|
||||
0x60, 0x00,
|
||||
0x63, 0x00,
|
||||
0x64, 0x00,
|
||||
0x65, 0x00,
|
||||
0x66, 0x00,
|
||||
0x67, 0x00,
|
||||
0x68, 0x00,
|
||||
0x69, 0x00,
|
||||
0x6a, 0x02,
|
||||
0x6b, 0x00,
|
||||
0x70, 0xff,
|
||||
0x71, 0x00,
|
||||
0x72, 0x00,
|
||||
0x73, 0x00,
|
||||
0x74, 0x0c,
|
||||
0x80, 0x00,
|
||||
0x81, 0x00,
|
||||
0x82, 0x00,
|
||||
0x83, 0x00,
|
||||
0x84, 0x04,
|
||||
0x85, 0x80,
|
||||
0x86, 0x24,
|
||||
0x87, 0x78,
|
||||
0x88, 0x00,
|
||||
0x89, 0x00,
|
||||
0x90, 0x01,
|
||||
0x91, 0x01,
|
||||
0xa0, 0x00,
|
||||
0xa1, 0x00,
|
||||
0xa2, 0x00,
|
||||
0xb0, 0x91,
|
||||
0xb1, 0x0b,
|
||||
0xc0, 0x4b,
|
||||
0xc1, 0x00,
|
||||
0xc2, 0x00,
|
||||
0xd0, 0x00,
|
||||
0xd1, 0x00,
|
||||
0xd2, 0x00,
|
||||
0xd3, 0x00,
|
||||
0xd4, 0x00,
|
||||
0xd5, 0x00,
|
||||
0xde, 0x00,
|
||||
0xdf, 0x00,
|
||||
0x61, 0x38,
|
||||
0x62, 0x0a,
|
||||
0x53, 0x13,
|
||||
0x59, 0x08,
|
||||
0x55, 0x00,
|
||||
0x56, 0x40,
|
||||
0x57, 0x08,
|
||||
0x58, 0x3d,
|
||||
0x88, 0x10,
|
||||
0xa0, 0x00,
|
||||
0xa0, 0x00,
|
||||
0xa0, 0x00,
|
||||
0xa0, 0x04,
|
||||
0xff, 0xff,
|
||||
};
|
||||
|
||||
static struct stv0297_config dvbc_philips_tdm1316l_config = {
|
||||
.demod_address = 0x1c,
|
||||
.inittab = dvbc_philips_tdm1316l_inittab,
|
||||
.invert = 0,
|
||||
};
|
||||
|
||||
static void frontend_init(struct ttusb* ttusb)
|
||||
{
|
||||
switch(le16_to_cpu(ttusb->dev->descriptor.idProduct)) {
|
||||
|
@ -1413,6 +1582,12 @@ static void frontend_init(struct ttusb* ttusb)
|
|||
ttusb->fe->ops->tuner_ops.set_params = alps_tdbe2_tuner_set_params;
|
||||
break;
|
||||
}
|
||||
|
||||
ttusb->fe = stv0297_attach(&dvbc_philips_tdm1316l_config, &ttusb->i2c_adap);
|
||||
if (ttusb->fe != NULL) {
|
||||
ttusb->fe->ops->tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params;
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
case 0x1005: // Hauppauge/TT Nova-USB-t budget (tda10046/Philips td1316(tda6651tt) OR cx22700/ALPS TDMB7(??))
|
||||
|
|
Loading…
Reference in New Issue