hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'cns3xxx/multiplatform' into next/multiplatform 

I've looked at all the platforms recently to see what their
state is. cns3xxx seems quite clean but not very actively
maintained. Since it is really easy to convert to multiplatform,
that's what I did here.

* cns3xxx/multiplatform:
  ARM: cns3xxx: initial DT support
  ARM: cns3xxx: enable multiplatform support
  ARM: cns3xxx: move debug_ll code to include/debug/
  ARM: cns3xxx: enable sparse IRQ support
  ARM: cns3xxx: make mach header files local

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2013-03-15 22:29:38 +01:00
parent 0203e0f7d7 415f59142d
commit b83e139caf
17 changed files with 158 additions and 119 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
arch/arm/Kconfig
View File

@ -382,17 +382,6 @@ config ARCH_BCM2835
This enables support for the Broadcom BCM2835 SoC. This SoC is
use in the Raspberry Pi, and Roku 2 devices.
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family"
select ARM_GIC
select CPU_V6K
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
help
Support for Cavium Networks CNS3XXX platform.
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB

8
arch/arm/Kconfig.debug
View File

@ -103,6 +103,13 @@ choice
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
config DEBUG_CNS3XXX
bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
depends on ARCH_CNS3XXX
help
Say Y here if you want the debug print routines to direct
their output to the CNS3xxx UART0.
config DEBUG_DAVINCI_DA8XX_UART1
bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
depends on ARCH_DAVINCI_DA8XX
@ -586,6 +593,7 @@ endchoice
config DEBUG_LL_INCLUDE
string
default "debug/cns3xxx.S" if DEBUG_CNS3XXX
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \

3
arch/arm/configs/cns3420vb_defconfig
View File

@ -19,8 +19,11 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_IOSCHED_CFQ=m
CONFIG_ARCH_MULTI_V6=y
#CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_CNS3XXX=y
CONFIG_MACH_CNS3420VB=y
CONFIG_DEBUG_CNS3XXX=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0

0
arch/arm/mach-cns3xxx/include/mach/debug-macro.S → arch/arm/include/debug/cns3xxx.S
View File

12
arch/arm/mach-cns3xxx/Kconfig
View File

@ -1,8 +1,20 @@
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
select ARM_GIC
select CPU_V6K
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
help
Support for Cavium Networks CNS3XXX platform.
menu "CNS3XXX platform type"
depends on ARCH_CNS3XXX
config MACH_CNS3420VB
bool "Support for CNS3420 Validation Board"
depends on ATAGS
help
Include support for the Cavium Networks CNS3420 MPCore Platform
Baseboard.

8
arch/arm/mach-cns3xxx/Makefile
View File

@ -1,3 +1,5 @@
obj-$(CONFIG_ARCH_CNS3XXX) += core.o pm.o devices.o
obj-$(CONFIG_PCI) += pcie.o
obj-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o
cns3xxx-y += core.o pm.o
cns3xxx-$(CONFIG_ATAGS) += devices.o
cns3xxx-$(CONFIG_PCI) += pcie.o
cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o

6
arch/arm/mach-cns3xxx/cns3420vb.c
View File

@ -31,9 +31,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/cns3xxx.h>
#include <mach/irqs.h>
#include <mach/pm.h>
#include "cns3xxx.h"
#include "pm.h"
#include "core.h"
#include "devices.h"
@ -247,6 +246,7 @@ static void __init cns3420_map_io(void)
MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
.atag_offset = 0x100,
.nr_irqs = NR_IRQS_CNS3XXX,
.map_io = cns3420_map_io,
.init_irq = cns3xxx_init_irq,
.init_time = cns3xxx_timer_init,

7
arch/arm/mach-cns3xxx/include/mach/cns3xxx.h → arch/arm/mach-cns3xxx/cns3xxx.h
View File

@ -553,6 +553,8 @@ int cns3xxx_cpu_clock(void);
/*
* ARM11 MPCore interrupt sources (primary GIC)
*/
#define IRQ_TC11MP_GIC_START 32
#define IRQ_CNS3XXX_PMU (IRQ_TC11MP_GIC_START + 0)
#define IRQ_CNS3XXX_SDIO (IRQ_TC11MP_GIC_START + 1)
#define IRQ_CNS3XXX_L2CC (IRQ_TC11MP_GIC_START + 2)
@ -624,9 +626,4 @@ int cns3xxx_cpu_clock(void);
#define NR_IRQS_CNS3XXX (IRQ_TC11MP_GIC_START + 64)
#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX)
#undef NR_IRQS
#define NR_IRQS NR_IRQS_CNS3XXX
#endif
#endif /* __MACH_BOARD_CNS3XXX_H */

121
arch/arm/mach-cns3xxx/core.c
View File

@ -13,12 +13,18 @@
#include <linux/clockchips.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/cns3xxx.h>
#include "cns3xxx.h"
#include "core.h"
#include "pm.h"
static struct map_desc cns3xxx_io_desc[] __initdata = {
{
@ -276,3 +282,116 @@ void __init cns3xxx_l2x0_init(void)
}
#endif /* CONFIG_CACHE_L2X0 */
static int csn3xxx_usb_power_on(struct platform_device *pdev)
{
/*
* EHCI and OHCI share the same clock and power,
* resetting twice would cause the 1st controller been reset.
* Therefore only do power up at the first up device, and
* power down at the last down device.
*
* Set USB AHB INCR length to 16
*/
if (atomic_inc_return(&usb_pwr_ref) == 1) {
cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
MISC_CHIP_CONFIG_REG);
}
return 0;
}
static void csn3xxx_usb_power_off(struct platform_device *pdev)
{
/*
* EHCI and OHCI share the same clock and power,
* resetting twice would cause the 1st controller been reset.
* Therefore only do power up at the first up device, and
* power down at the last down device.
*/
if (atomic_dec_return(&usb_pwr_ref) == 0)
cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
}
static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
.power_on = csn3xxx_usb_power_on,
.power_off = csn3xxx_usb_power_off,
};
static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
.num_ports = 1,
.power_on = csn3xxx_usb_power_on,
.power_off = csn3xxx_usb_power_off,
};
static struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
{ "cavium,cns3420-sdhci", CNS3XXX_SDIO_BASE, "ahci", NULL },
{},
};
static void __init cns3xxx_init(void)
{
struct device_node *dn;
cns3xxx_l2x0_init();
dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-ahci");
if (of_device_is_available(dn)) {
u32 tmp;
tmp = __raw_readl(MISC_SATA_POWER_MODE);
tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
__raw_writel(tmp, MISC_SATA_POWER_MODE);
/* Enable SATA PHY */
cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
/* Enable SATA Clock */
cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
/* De-Asscer SATA Reset */
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
}
dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
if (of_device_is_available(dn)) {
u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
u32 gpioa_pins = __raw_readl(gpioa);
/* MMC/SD pins share with GPIOA */
gpioa_pins |= 0x1fff0004;
__raw_writel(gpioa_pins, gpioa);
cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
}
pm_power_off = cns3xxx_power_off;
of_platform_populate(NULL, of_default_bus_match_table,
cns3xxx_auxdata, NULL);
}
static const char *cns3xxx_dt_compat[] __initdata = {
"cavium,cns3410",
"cavium,cns3420",
NULL,
};
DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
.dt_compat = cns3xxx_dt_compat,
.nr_irqs = NR_IRQS_CNS3XXX,
.map_io = cns3xxx_map_io,
.init_irq = cns3xxx_init_irq,
.init_time = cns3xxx_timer_init,
.init_machine = cns3xxx_init,
.restart = cns3xxx_restart,
MACHINE_END

5
arch/arm/mach-cns3xxx/devices.c
View File

@ -16,9 +16,8 @@
#include <linux/compiler.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <mach/cns3xxx.h>
#include <mach/irqs.h>
#include <mach/pm.h>
#include "cns3xxx.h"
#include "pm.h"
#include "core.h"
#include "devices.h"

24
arch/arm/mach-cns3xxx/include/mach/irqs.h
View File

@ -1,24 +0,0 @@
/*
* Copyright 2000 Deep Blue Solutions Ltd.
* Copyright 2003 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
#define IRQ_TC11MP_GIC_START 32
#include <mach/cns3xxx.h>
#ifndef NR_IRQS
#error "NR_IRQS not defined by the board-specific files"
#endif
#endif

12
arch/arm/mach-cns3xxx/include/mach/timex.h
View File

@ -1,12 +0,0 @@
/*
* Cavium Networks architecture timex specifications
*
* Copyright 2003 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#define CLOCK_TICK_RATE (50000000 / 16)

53
arch/arm/mach-cns3xxx/include/mach/uncompress.h
View File

@ -1,53 +0,0 @@
/*
* Copyright 2003 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#include <asm/mach-types.h>
#include <mach/cns3xxx.h>
#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30))
#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18))
/*
* Return the UART base address
*/
static inline unsigned long get_uart_base(void)
{
if (machine_is_cns3420vb())
return CNS3XXX_UART0_BASE;
else
return 0;
}
/*
* This does not append a newline
*/
static inline void putc(int c)
{
unsigned long base = get_uart_base();
while (AMBA_UART_FR(base) & (1 << 5))
barrier();
AMBA_UART_DR(base) = c;
}
static inline void flush(void)
{
unsigned long base = get_uart_base();
while (AMBA_UART_FR(base) & (1 << 3))
barrier();
}
/*
* nothing to do
*/
#define arch_decomp_setup()

2
arch/arm/mach-cns3xxx/pcie.c
View File

@ -20,7 +20,7 @@
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <asm/mach/map.h>
#include <mach/cns3xxx.h>
#include "cns3xxx.h"
#include "core.h"
enum cns3xxx_access_type {

4
arch/arm/mach-cns3xxx/pm.c
View File

@ -11,8 +11,8 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/atomic.h>
#include <mach/cns3xxx.h>
#include <mach/pm.h>
#include "cns3xxx.h"
#include "pm.h"
#include "core.h"
void cns3xxx_pwr_clk_en(unsigned int block)

0
arch/arm/mach-cns3xxx/include/mach/pm.h → arch/arm/mach-cns3xxx/pm.h
View File

1
drivers/mmc/host/sdhci-cns3xxx.c
View File

@ -16,7 +16,6 @@
#include <linux/device.h>
#include <linux/mmc/host.h>
#include <linux/module.h>
#include <mach/cns3xxx.h>
#include "sdhci-pltfm.h"
static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host)