diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h index e14bcd7a1ba1..c142532db8cb 100644 --- a/drivers/cxl/cxlmem.h +++ b/drivers/cxl/cxlmem.h @@ -66,6 +66,45 @@ struct cxl_memdev * devm_cxl_add_memdev(struct cxl_mem *cxlm, const struct cdevm_file_operations *cdevm_fops); +/** + * struct cxl_mbox_cmd - A command to be submitted to hardware. + * @opcode: (input) The command set and command submitted to hardware. + * @payload_in: (input) Pointer to the input payload. + * @payload_out: (output) Pointer to the output payload. Must be allocated by + * the caller. + * @size_in: (input) Number of bytes to load from @payload_in. + * @size_out: (input) Max number of bytes loaded into @payload_out. + * (output) Number of bytes generated by the device. For fixed size + * outputs commands this is always expected to be deterministic. For + * variable sized output commands, it tells the exact number of bytes + * written. + * @return_code: (output) Error code returned from hardware. + * + * This is the primary mechanism used to send commands to the hardware. + * All the fields except @payload_* correspond exactly to the fields described in + * Command Register section of the CXL 2.0 8.2.8.4.5. @payload_in and + * @payload_out are written to, and read from the Command Payload Registers + * defined in CXL 2.0 8.2.8.4.8. + */ +struct cxl_mbox_cmd { + u16 opcode; + void *payload_in; + void *payload_out; + size_t size_in; + size_t size_out; + u16 return_code; +#define CXL_MBOX_SUCCESS 0 +}; + +/* + * CXL 2.0 - Memory capacity multiplier + * See Section 8.2.9.5 + * + * Volatile, Persistent, and Partition capacities are specified to be in + * multiples of 256MB - define a multiplier to convert to/from bytes. + */ +#define CXL_CAPACITY_MULTIPLIER SZ_256M + /** * struct cxl_mem - A CXL memory device * @dev: The device associated with this CXL device. @@ -88,6 +127,7 @@ devm_cxl_add_memdev(struct cxl_mem *cxlm, * @active_persistent_bytes: sum of hard + soft persistent * @next_volatile_bytes: volatile capacity change pending device reset * @next_persistent_bytes: persistent capacity change pending device reset + * @mbox_send: @dev specific transport for transmitting mailbox commands * * See section 8.2.9.5.2 Capacity Configuration and Label Storage for * details on capacity parameters. @@ -115,5 +155,7 @@ struct cxl_mem { u64 active_persistent_bytes; u64 next_volatile_bytes; u64 next_persistent_bytes; + + int (*mbox_send)(struct cxl_mem *cxlm, struct cxl_mbox_cmd *cmd); }; #endif /* __CXL_MEM_H__ */ diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c index 8077d907e7d3..e2f27671c6b2 100644 --- a/drivers/cxl/pci.c +++ b/drivers/cxl/pci.c @@ -64,45 +64,6 @@ enum opcode { CXL_MBOX_OP_MAX = 0x10000 }; -/* - * CXL 2.0 - Memory capacity multiplier - * See Section 8.2.9.5 - * - * Volatile, Persistent, and Partition capacities are specified to be in - * multiples of 256MB - define a multiplier to convert to/from bytes. - */ -#define CXL_CAPACITY_MULTIPLIER SZ_256M - -/** - * struct mbox_cmd - A command to be submitted to hardware. - * @opcode: (input) The command set and command submitted to hardware. - * @payload_in: (input) Pointer to the input payload. - * @payload_out: (output) Pointer to the output payload. Must be allocated by - * the caller. - * @size_in: (input) Number of bytes to load from @payload_in. - * @size_out: (input) Max number of bytes loaded into @payload_out. - * (output) Number of bytes generated by the device. For fixed size - * outputs commands this is always expected to be deterministic. For - * variable sized output commands, it tells the exact number of bytes - * written. - * @return_code: (output) Error code returned from hardware. - * - * This is the primary mechanism used to send commands to the hardware. - * All the fields except @payload_* correspond exactly to the fields described in - * Command Register section of the CXL 2.0 8.2.8.4.5. @payload_in and - * @payload_out are written to, and read from the Command Payload Registers - * defined in CXL 2.0 8.2.8.4.8. - */ -struct mbox_cmd { - u16 opcode; - void *payload_in; - void *payload_out; - size_t size_in; - size_t size_out; - u16 return_code; -#define CXL_MBOX_SUCCESS 0 -}; - static DECLARE_RWSEM(cxl_memdev_rwsem); static struct dentry *cxl_debugfs; static bool cxl_raw_allow_all; @@ -266,7 +227,7 @@ static bool cxl_is_security_command(u16 opcode) } static void cxl_mem_mbox_timeout(struct cxl_mem *cxlm, - struct mbox_cmd *mbox_cmd) + struct cxl_mbox_cmd *mbox_cmd) { struct device *dev = cxlm->dev; @@ -297,7 +258,7 @@ static void cxl_mem_mbox_timeout(struct cxl_mem *cxlm, * mailbox. */ static int __cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, - struct mbox_cmd *mbox_cmd) + struct cxl_mbox_cmd *mbox_cmd) { void __iomem *payload = cxlm->regs.mbox + CXLDEV_MBOX_PAYLOAD_OFFSET; struct device *dev = cxlm->dev; @@ -472,6 +433,20 @@ static void cxl_mem_mbox_put(struct cxl_mem *cxlm) mutex_unlock(&cxlm->mbox_mutex); } +static int cxl_pci_mbox_send(struct cxl_mem *cxlm, struct cxl_mbox_cmd *cmd) +{ + int rc; + + rc = cxl_mem_mbox_get(cxlm); + if (rc) + return rc; + + rc = __cxl_mem_mbox_send_cmd(cxlm, cmd); + cxl_mem_mbox_put(cxlm); + + return rc; +} + /** * handle_mailbox_cmd_from_user() - Dispatch a mailbox command for userspace. * @cxlm: The CXL memory device to communicate with. @@ -503,7 +478,7 @@ static int handle_mailbox_cmd_from_user(struct cxl_mem *cxlm, s32 *size_out, u32 *retval) { struct device *dev = cxlm->dev; - struct mbox_cmd mbox_cmd = { + struct cxl_mbox_cmd mbox_cmd = { .opcode = cmd->opcode, .size_in = cmd->info.size_in, .size_out = cmd->info.size_out, @@ -525,10 +500,6 @@ static int handle_mailbox_cmd_from_user(struct cxl_mem *cxlm, } } - rc = cxl_mem_mbox_get(cxlm); - if (rc) - goto out; - dev_dbg(dev, "Submitting %s command for user\n" "\topcode: %x\n" @@ -539,8 +510,7 @@ static int handle_mailbox_cmd_from_user(struct cxl_mem *cxlm, dev_WARN_ONCE(dev, cmd->info.id == CXL_MEM_COMMAND_ID_RAW, "raw command path used\n"); - rc = __cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd); - cxl_mem_mbox_put(cxlm); + rc = cxlm->mbox_send(cxlm, &mbox_cmd); if (rc) goto out; @@ -874,7 +844,7 @@ static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, u16 opcode, void *out, size_t out_size) { const struct cxl_mem_command *cmd = cxl_mem_find_command(opcode); - struct mbox_cmd mbox_cmd = { + struct cxl_mbox_cmd mbox_cmd = { .opcode = opcode, .payload_in = in, .size_in = in_size, @@ -886,12 +856,7 @@ static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, u16 opcode, if (out_size > cxlm->payload_size) return -E2BIG; - rc = cxl_mem_mbox_get(cxlm); - if (rc) - return rc; - - rc = __cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd); - cxl_mem_mbox_put(cxlm); + rc = cxlm->mbox_send(cxlm, &mbox_cmd); if (rc) return rc; @@ -913,6 +878,7 @@ static int cxl_mem_setup_mailbox(struct cxl_mem *cxlm) { const int cap = readl(cxlm->regs.mbox + CXLDEV_MBOX_CAPS_OFFSET); + cxlm->mbox_send = cxl_pci_mbox_send; cxlm->payload_size = 1 << FIELD_GET(CXLDEV_MBOX_CAP_PAYLOAD_SIZE_MASK, cap);