ARM: davinci: da830-evm: use gpio descriptor for mmc pins
Currently the mmc driver is polling the gpio to know if the card was removed. By using a gpio descriptor instead of the platform callbacks, the driver will be able to register the gpio using the mmc core APIs designed for this purpose. This has the advantage that an irq will be registered, and polling is no longer needed. Also, a dependency on platform callbacks is removed for this board. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> [nsekhar@ti.com: minor commit message edit] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This commit is contained in:
parent
bdf0e8364f
commit
b5e1438cf9
|
@ -14,6 +14,7 @@
|
|||
#include <linux/console.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c/pcf857x.h>
|
||||
|
@ -204,22 +205,16 @@ static const short da830_evm_mmc_sd_pins[] = {
|
|||
-1
|
||||
};
|
||||
|
||||
#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1)
|
||||
#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2)
|
||||
|
||||
static int da830_evm_mmc_get_ro(int index)
|
||||
{
|
||||
return gpio_get_value(DA830_MMCSD_WP_PIN);
|
||||
}
|
||||
|
||||
static int da830_evm_mmc_get_cd(int index)
|
||||
{
|
||||
return !gpio_get_value(DA830_MMCSD_CD_PIN);
|
||||
}
|
||||
static struct gpiod_lookup_table mmc_gpios_table = {
|
||||
.dev_id = "da830-mmc.0",
|
||||
.table = {
|
||||
/* gpio chip 1 contains gpio range 32-63 */
|
||||
GPIO_LOOKUP("davinci_gpio.1", 2, "cd", GPIO_ACTIVE_LOW),
|
||||
GPIO_LOOKUP("davinci_gpio.1", 1, "wp", GPIO_ACTIVE_LOW),
|
||||
},
|
||||
};
|
||||
|
||||
static struct davinci_mmc_config da830_evm_mmc_config = {
|
||||
.get_ro = da830_evm_mmc_get_ro,
|
||||
.get_cd = da830_evm_mmc_get_cd,
|
||||
.wires = 8,
|
||||
.max_freq = 50000000,
|
||||
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
|
||||
|
@ -235,26 +230,12 @@ static inline void da830_evm_init_mmc(void)
|
|||
return;
|
||||
}
|
||||
|
||||
ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP");
|
||||
if (ret) {
|
||||
pr_warn("%s: can not open GPIO %d\n",
|
||||
__func__, DA830_MMCSD_WP_PIN);
|
||||
return;
|
||||
}
|
||||
gpio_direction_input(DA830_MMCSD_WP_PIN);
|
||||
|
||||
ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n");
|
||||
if (ret) {
|
||||
pr_warn("%s: can not open GPIO %d\n",
|
||||
__func__, DA830_MMCSD_CD_PIN);
|
||||
return;
|
||||
}
|
||||
gpio_direction_input(DA830_MMCSD_CD_PIN);
|
||||
gpiod_add_lookup_table(&mmc_gpios_table);
|
||||
|
||||
ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
|
||||
if (ret) {
|
||||
pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret);
|
||||
gpio_free(DA830_MMCSD_WP_PIN);
|
||||
gpiod_remove_lookup_table(&mmc_gpios_table);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in New Issue