hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ARM: OMAP3: mmc-twl4030 uses regulator framework 

Decouple the HSMMC glue from the twl4030 as the only
regulator provider, using the regulator framework instead.
This makes the glue's "mmc-twl4030" name become a complete
misnomer ... this code could probably all migrate into the
HSMMC driver now.

Tested on 3430SDP (SD and low-voltage MMC) and Beagle (SD),
plus some other boards (including Overo) after they were
converted to set up MMC regulators properly.

Eventually all boards should just associate a regulator with
each MMC controller they use.  In some cases (Overo MMC2 and
Pandora MMC3, at least) that would be a fixed-voltage regulator
with no real software control.  As a temporary hack (pending
regulator-next updates to make the "fixed.c" regulator become
usable) there's a new ocr_mask field for those boards.

Patch updated with a fix for disabling vcc_aux by
Adrian Hunter <adrian.hunter@nokia.com>

Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
David Brownell 2009-05-28 14:04:03 -07:00 committed by Tony Lindgren
parent 4a899d5e93
commit b583f26d51
3 changed files with 118 additions and 171 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

280
arch/arm/mach-omap2/mmc-twl4030.c
View File

@ -16,8 +16,8 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
#include <linux/regulator/machine.h>
#include <linux/mmc/host.h>
#include <linux/regulator/consumer.h>
#include <mach/hardware.h>
#include <mach/control.h>
@ -26,32 +26,10 @@
#include "mmc-twl4030.h"
#if defined(CONFIG_TWL4030_CORE) && \
#if defined(CONFIG_REGULATOR) && \
(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
#define LDO_CLR 0x00
#define VSEL_S2_CLR 0x40
#define VMMC1_DEV_GRP 0x27
#define VMMC1_CLR 0x00
#define VMMC1_315V 0x03
#define VMMC1_300V 0x02
#define VMMC1_285V 0x01
#define VMMC1_185V 0x00
#define VMMC1_DEDICATED 0x2A
#define VMMC2_DEV_GRP 0x2B
#define VMMC2_CLR 0x40
#define VMMC2_315V 0x0c
#define VMMC2_300V 0x0b
#define VMMC2_285V 0x0a
#define VMMC2_280V 0x09
#define VMMC2_260V 0x08
#define VMMC2_185V 0x06
#define VMMC2_DEDICATED 0x2E
#define VMMC_DEV_GRP_P1 0x20
static u16 control_pbias_offset;
static u16 control_devconf1_offset;
@ -59,19 +37,16 @@ static u16 control_devconf1_offset;
static struct twl_mmc_controller {
struct omap_mmc_platform_data *mmc;
u8 twl_vmmc_dev_grp;
u8 twl_mmc_dedicated;
char name[HSMMC_NAME_LEN + 1];
} hsmmc[OMAP34XX_NR_MMC] = {
{
.twl_vmmc_dev_grp = VMMC1_DEV_GRP,
.twl_mmc_dedicated = VMMC1_DEDICATED,
},
{
.twl_vmmc_dev_grp = VMMC2_DEV_GRP,
.twl_mmc_dedicated = VMMC2_DEDICATED,
},
};
/* Vcc == configured supply
* Vcc_alt == optional
* - MMC1, supply for DAT4..DAT7
* - MMC2/MMC2, external level shifter voltage supply, for
* chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
*/
struct regulator *vcc;
struct regulator *vcc_aux;
char name[HSMMC_NAME_LEN + 1];
} hsmmc[OMAP34XX_NR_MMC];
static int twl_mmc_card_detect(int irq)
{
@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev)
int ret = 0;
int i;
ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
if (ret)
goto done;
ret = gpio_direction_input(mmc->slots[0].switch_pin);
if (ret)
goto err;
/* MMC/SD/SDIO doesn't require a card detect switch */
if (gpio_is_valid(mmc->slots[0].switch_pin)) {
ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
if (ret)
goto done;
ret = gpio_direction_input(mmc->slots[0].switch_pin);
if (ret)
goto err;
}
/* require at least main regulator */
for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
if (hsmmc[i].name == mmc->slots[0].name) {
struct regulator *reg;
hsmmc[i].mmc = mmc;
reg = regulator_get(dev, "vmmc");
if (IS_ERR(reg)) {
dev_dbg(dev, "vmmc regulator missing\n");
/* HACK: until fixed.c regulator is usable,
* we don't require a main regulator
* for MMC2 or MMC3
*/
if (i != 0)
break;
ret = PTR_ERR(reg);
goto err;
}
hsmmc[i].vcc = reg;
mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
/* allow an aux regulator */
reg = regulator_get(dev, "vmmc_aux");
hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
/* UGLY HACK: workaround regulator framework bugs.
* When the bootloader leaves a supply active, it's
* initialized with zero usecount ... and we can't
* disable it without first enabling it. Until the
* framework is fixed, we need a workaround like this
* (which is safe for MMC, but not in general).
*/
if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
regulator_enable(hsmmc[i].vcc);
regulator_disable(hsmmc[i].vcc);
}
if (hsmmc[i].vcc_aux) {
if (regulator_is_enabled(reg) > 0) {
regulator_enable(reg);
regulator_disable(reg);
}
}
break;
}
}
@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot)
#define twl_mmc_resume NULL
#endif
/*
* Sets the MMC voltage in twl4030
*/
#define MMC1_OCR (MMC_VDD_165_195 \
|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
#define MMC2_OCR (MMC_VDD_165_195 \
|MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
{
int ret;
u8 vmmc = 0, dev_grp_val;
if (!vdd)
goto doit;
if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
/* VMMC1: max 220 mA. And for 8-bit mode,
* VSIM: max 50 mA
*/
switch (1 << vdd) {
case MMC_VDD_165_195:
vmmc = VMMC1_185V;
/* and VSIM_180V */
break;
case MMC_VDD_28_29:
vmmc = VMMC1_285V;
/* and VSIM_280V */
break;
case MMC_VDD_29_30:
case MMC_VDD_30_31:
vmmc = VMMC1_300V;
/* and VSIM_300V */
break;
case MMC_VDD_31_32:
vmmc = VMMC1_315V;
/* error if VSIM needed */
break;
default:
return -EINVAL;
}
} else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
/* VMMC2: max 100 mA */
switch (1 << vdd) {
case MMC_VDD_165_195:
vmmc = VMMC2_185V;
break;
case MMC_VDD_25_26:
case MMC_VDD_26_27:
vmmc = VMMC2_260V;
break;
case MMC_VDD_27_28:
vmmc = VMMC2_280V;
break;
case MMC_VDD_28_29:
vmmc = VMMC2_285V;
break;
case MMC_VDD_29_30:
case MMC_VDD_30_31:
vmmc = VMMC2_300V;
break;
case MMC_VDD_31_32:
vmmc = VMMC2_315V;
break;
default:
return -EINVAL;
}
} else {
return -EINVAL;
}
doit:
if (vdd)
dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */
else
dev_grp_val = LDO_CLR; /* Power down */
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
dev_grp_val, c->twl_vmmc_dev_grp);
if (ret || !vdd)
return ret;
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
vmmc, c->twl_mmc_dedicated);
return ret;
}
static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
* card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
* card with Vcc regulator (from twl4030 or whatever). OMAP has both
* 1.8V and 3.0V modes, controlled by the PBIAS register.
*
* In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
* is most naturally TWL VSIM; those pins also use PBIAS.
*
* FIXME handle VMMC1A as needed ...
*/
if (power_on) {
if (cpu_is_omap2430()) {
@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
ret = twl_mmc_set_voltage(c, vdd);
ret = mmc_regulator_set_ocr(c->vcc, vdd);
/* 100ms delay required for PBIAS configuration */
msleep(100);
@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
ret = twl_mmc_set_voltage(c, 0);
ret = mmc_regulator_set_ocr(c->vcc, 0);
/* 100ms delay required for PBIAS configuration */
msleep(100);
@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
return ret;
}
static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
{
int ret;
int ret = 0;
struct twl_mmc_controller *c = &hsmmc[1];
struct omap_mmc_platform_data *mmc = dev->platform_data;
/* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.
*/
if (!c->vcc)
return 0;
/*
* Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
* Assume Vcc regulator is used only to power the card ... OMAP
* VDDS is used to power the pins, optionally with a transceiver to
* support cards using voltages other than VDDS (1.8V nominal). When a
* transceiver is used, DAT3..7 are muxed as transceiver control pins.
*
* In some cases this regulator won't support enable/disable;
* e.g. it's a fixed rail for a WLAN chip.
*
* In other cases vcc_aux switches interface power. Example, for
* eMMC cards it represents VccQ. Sometimes transceivers or SDIO
* chips/cards need an interface voltage rail too.
*/
if (power_on) {
/* only MMC2 supports a CLKIN */
if (mmc->slots[0].internal_clock) {
u32 reg;
@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
ret = twl_mmc_set_voltage(c, vdd);
ret = mmc_regulator_set_ocr(c->vcc, vdd);
/* enable interface voltage rail, if needed */
if (ret == 0 && c->vcc_aux) {
ret = regulator_enable(c->vcc_aux);
if (ret < 0)
ret = mmc_regulator_set_ocr(c->vcc, 0);
}
} else {
ret = twl_mmc_set_voltage(c, 0);
if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
ret = regulator_disable(c->vcc_aux);
if (ret == 0)
ret = mmc_regulator_set_ocr(c->vcc, 0);
}
return ret;
}
static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
/*
* Assume MMC3 has self-powered device connected, for example on-board
* chip with external power source.
*/
return 0;
}
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
mmc->slots[0].wires = c->wires;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
mmc->init = twl_mmc_late_init;
/* note: twl4030 card detect GPIOs normally switch VMMCx ... */
/* note: twl4030 card detect GPIOs can disable VMMCx ... */
if (gpio_is_valid(c->gpio_cd)) {
mmc->init = twl_mmc_late_init;
mmc->cleanup = twl_mmc_cleanup;
mmc->suspend = twl_mmc_suspend;
mmc->resume = twl_mmc_resume;
@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
} else
mmc->slots[0].gpio_wp = -EINVAL;
/* NOTE: we assume OMAP's MMC1 and MMC2 use
* the TWL4030's VMMC1 and VMMC2, respectively;
* and that MMC3 device has it's own power source.
/* NOTE: MMC slots should have a Vcc regulator set up.
* This may be from a TWL4030-family chip, another
* controllable regulator, or a fixed supply.
*
* temporary HACK: ocr_mask instead of fixed supply
*/
mmc->slots[0].ocr_mask = c->ocr_mask;
switch (c->mmc) {
case 1:
/* on-chip level shifting via PBIAS0/PBIAS1 */
mmc->slots[0].set_power = twl_mmc1_set_power;
mmc->slots[0].ocr_mask = MMC1_OCR;
break;
case 2:
mmc->slots[0].set_power = twl_mmc2_set_power;
if (c->transceiver)
mmc->slots[0].ocr_mask = MMC2_OCR;
else
mmc->slots[0].ocr_mask = MMC_VDD_165_195;
break;
if (c->ext_clock)
c->transceiver = 1;
if (c->transceiver && c->wires > 4)
c->wires = 4;
/* FALLTHROUGH */
case 3:
mmc->slots[0].set_power = twl_mmc3_set_power;
mmc->slots[0].ocr_mask = MMC_VDD_165_195;
/* off-chip level shifting, or none */
mmc->slots[0].set_power = twl_mmc23_set_power;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);

3
arch/arm/mach-omap2/mmc-twl4030.h
View File

@ -16,9 +16,10 @@ struct twl4030_hsmmc_info {
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct device *dev; /* returned: pointer to mmc adapter */
int ocr_mask; /* temporary HACK */
};
#if defined(CONFIG_TWL4030_CORE) && \
#if defined(CONFIG_REGULATOR) && \
(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))

6
drivers/mmc/host/omap_hsmmc.c
View File

@ -1073,7 +1073,6 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
mmc->ocr_avail = mmc_slot(host).ocr_mask;
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
if (pdata->slots[host->slot_id].wires >= 8)
@ -1110,13 +1109,14 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
goto err_irq;
}
/* initialize power supplies, gpios, etc */
if (pdata->init != NULL) {
if (pdata->init(&pdev->dev) != 0) {
dev_dbg(mmc_dev(host->mmc),
"Unable to configure MMC IRQs\n");
dev_dbg(mmc_dev(host->mmc), "late init error\n");
goto err_irq_cd_init;
}
}
mmc->ocr_avail = mmc_slot(host).ocr_mask;
/* Request IRQ for card detect */
if ((mmc_slot(host).card_detect_irq)) {