From d9663c8c21491267c064cdb028b767404a39d7c7 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:49:42 -0500 Subject: [PATCH 1/9] amd-xgbe-phy: Use phydev advertising field vs supported With ethtool being able to control what is advertised, the advertising field is what should be used for priming the auto-negotiation registers and for various other checks, instead of the supported field. Also, move the initial setting of the supported and advertising fields into the probe function so that they are not reset each time the device is brought up, thus allowing the user to set as desired before bringing the device up. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/phy/amd-xgbe-phy.c | 77 +++++++++++++++++----------------- 1 file changed, 38 insertions(+), 39 deletions(-) diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c index 32efbd48f326..acb444928c76 100644 --- a/drivers/net/phy/amd-xgbe-phy.c +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -932,8 +932,8 @@ static enum amd_xgbe_phy_an amd_xgbe_an_incompat_link(struct phy_device *phydev) if (amd_xgbe_phy_in_kr_mode(phydev)) { priv->kr_state = AMD_XGBE_RX_ERROR; - if (!(phydev->supported & SUPPORTED_1000baseKX_Full) && - !(phydev->supported & SUPPORTED_2500baseX_Full)) + if (!(phydev->advertising & SUPPORTED_1000baseKX_Full) && + !(phydev->advertising & SUPPORTED_2500baseX_Full)) return AMD_XGBE_AN_NO_LINK; if (priv->kx_state != AMD_XGBE_RX_BPA) @@ -941,7 +941,7 @@ static enum amd_xgbe_phy_an amd_xgbe_an_incompat_link(struct phy_device *phydev) } else { priv->kx_state = AMD_XGBE_RX_ERROR; - if (!(phydev->supported & SUPPORTED_10000baseKR_Full)) + if (!(phydev->advertising & SUPPORTED_10000baseKR_Full)) return AMD_XGBE_AN_NO_LINK; if (priv->kr_state != AMD_XGBE_RX_BPA) @@ -1101,7 +1101,7 @@ static int amd_xgbe_an_init(struct phy_device *phydev) if (ret < 0) return ret; - if (phydev->supported & SUPPORTED_10000baseR_FEC) + if (phydev->advertising & SUPPORTED_10000baseR_FEC) ret |= 0xc000; else ret &= ~0xc000; @@ -1113,13 +1113,13 @@ static int amd_xgbe_an_init(struct phy_device *phydev) if (ret < 0) return ret; - if (phydev->supported & SUPPORTED_10000baseKR_Full) + if (phydev->advertising & SUPPORTED_10000baseKR_Full) ret |= 0x80; else ret &= ~0x80; - if ((phydev->supported & SUPPORTED_1000baseKX_Full) || - (phydev->supported & SUPPORTED_2500baseX_Full)) + if ((phydev->advertising & SUPPORTED_1000baseKX_Full) || + (phydev->advertising & SUPPORTED_2500baseX_Full)) ret |= 0x20; else ret &= ~0x20; @@ -1131,12 +1131,12 @@ static int amd_xgbe_an_init(struct phy_device *phydev) if (ret < 0) return ret; - if (phydev->supported & SUPPORTED_Pause) + if (phydev->advertising & SUPPORTED_Pause) ret |= 0x400; else ret &= ~0x400; - if (phydev->supported & SUPPORTED_Asym_Pause) + if (phydev->advertising & SUPPORTED_Asym_Pause) ret |= 0x800; else ret &= ~0x800; @@ -1212,38 +1212,14 @@ static int amd_xgbe_phy_config_init(struct phy_device *phydev) priv->an_irq_allocated = 1; } - ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_ABILITY); - if (ret < 0) - return ret; - priv->fec_ability = ret & XGBE_PHY_FEC_MASK; - - /* Initialize supported features */ - phydev->supported = SUPPORTED_Autoneg; - phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; - phydev->supported |= SUPPORTED_Backplane; - phydev->supported |= SUPPORTED_10000baseKR_Full; - switch (priv->speed_set) { - case AMD_XGBE_PHY_SPEEDSET_1000_10000: - phydev->supported |= SUPPORTED_1000baseKX_Full; - break; - case AMD_XGBE_PHY_SPEEDSET_2500_10000: - phydev->supported |= SUPPORTED_2500baseX_Full; - break; - } - - if (priv->fec_ability & XGBE_PHY_FEC_ENABLE) - phydev->supported |= SUPPORTED_10000baseR_FEC; - - phydev->advertising = phydev->supported; - /* Set initial mode - call the mode setting routines * directly to insure we are properly configured */ - if (phydev->supported & SUPPORTED_10000baseKR_Full) + if (phydev->advertising & SUPPORTED_10000baseKR_Full) ret = amd_xgbe_phy_xgmii_mode(phydev); - else if (phydev->supported & SUPPORTED_1000baseKX_Full) + else if (phydev->advertising & SUPPORTED_1000baseKX_Full) ret = amd_xgbe_phy_gmii_mode(phydev); - else if (phydev->supported & SUPPORTED_2500baseX_Full) + else if (phydev->advertising & SUPPORTED_2500baseX_Full) ret = amd_xgbe_phy_gmii_2500_mode(phydev); else ret = -EINVAL; @@ -1315,10 +1291,10 @@ static int __amd_xgbe_phy_config_aneg(struct phy_device *phydev) disable_irq(priv->an_irq); /* Start auto-negotiation in a supported mode */ - if (phydev->supported & SUPPORTED_10000baseKR_Full) + if (phydev->advertising & SUPPORTED_10000baseKR_Full) ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR); - else if ((phydev->supported & SUPPORTED_1000baseKX_Full) || - (phydev->supported & SUPPORTED_2500baseX_Full)) + else if ((phydev->advertising & SUPPORTED_1000baseKX_Full) || + (phydev->advertising & SUPPORTED_2500baseX_Full)) ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX); else ret = -EINVAL; @@ -1746,6 +1722,29 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev) sizeof(priv->serdes_dfe_tap_ena)); } + /* Initialize supported features */ + phydev->supported = SUPPORTED_Autoneg; + phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; + phydev->supported |= SUPPORTED_Backplane; + phydev->supported |= SUPPORTED_10000baseKR_Full; + switch (priv->speed_set) { + case AMD_XGBE_PHY_SPEEDSET_1000_10000: + phydev->supported |= SUPPORTED_1000baseKX_Full; + break; + case AMD_XGBE_PHY_SPEEDSET_2500_10000: + phydev->supported |= SUPPORTED_2500baseX_Full; + break; + } + + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_ABILITY); + if (ret < 0) + return ret; + priv->fec_ability = ret & XGBE_PHY_FEC_MASK; + if (priv->fec_ability & XGBE_PHY_FEC_ENABLE) + phydev->supported |= SUPPORTED_10000baseR_FEC; + + phydev->advertising = phydev->supported; + phydev->priv = priv; if (!priv->adev || acpi_disabled) From 65f57cb152ea0ad464793927e79074eb6da0064a Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:49:53 -0500 Subject: [PATCH 2/9] amd-xgbe-phy: Use the phy_driver flags field Remove the setting of the transceiver type when retrieving the device settings using ethtool and instead set the transceiver type in the phy_driver structure flags field. Change the transceiver type to be internal, also. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 1 - drivers/net/phy/amd-xgbe-phy.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c index ebf489351555..43e5571fe858 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c @@ -291,7 +291,6 @@ static int xgbe_get_settings(struct net_device *netdev, return -ENODEV; ret = phy_ethtool_gset(pdata->phydev, cmd); - cmd->transceiver = XCVR_EXTERNAL; DBGPR("<--xgbe_get_settings\n"); diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c index acb444928c76..4b95caf08aa9 100644 --- a/drivers/net/phy/amd-xgbe-phy.c +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -1816,6 +1816,7 @@ static struct phy_driver amd_xgbe_phy_driver[] = { .phy_id_mask = XGBE_PHY_MASK, .name = "AMD XGBE PHY", .features = 0, + .flags = PHY_IS_INTERNAL, .probe = amd_xgbe_phy_probe, .remove = amd_xgbe_phy_remove, .soft_reset = amd_xgbe_phy_soft_reset, From 9ae5eecdba7297725b280e81e905f48f85f9ffe7 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:50:04 -0500 Subject: [PATCH 3/9] amd-xgbe-phy: Provide support for auto-negotiation timeout Currently, there is no interrupt code that indicates auto-negotiation has timed out. If the auto-negotiation has timed out then the start of a new auto-negotiation will begin again with a new base page being received. The state machine could be in a state that is not expecting this interrupt code which results in an error during auto-negotiation. Update the code to timestamp when the auto-negotiation starts. Should another page received interrupt code occur before auto-negotiation has completed but after the auto-negotiation timeout, then reset the state machine to allow the auto-negotiation to continue. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/phy/amd-xgbe-phy.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c index 4b95caf08aa9..fb276f64cd64 100644 --- a/drivers/net/phy/amd-xgbe-phy.c +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -78,6 +78,7 @@ #include #include #include +#include MODULE_AUTHOR("Tom Lendacky "); MODULE_LICENSE("Dual BSD/GPL"); @@ -100,6 +101,8 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); #define XGBE_PHY_SPEED_2500 1 #define XGBE_PHY_SPEED_10000 2 +#define XGBE_AN_MS_TIMEOUT 500 + #define XGBE_AN_INT_CMPLT 0x01 #define XGBE_AN_INC_LINK 0x02 #define XGBE_AN_PG_RCV 0x04 @@ -434,6 +437,7 @@ struct amd_xgbe_phy_priv { unsigned int an_supported; unsigned int parallel_detect; unsigned int fec_ability; + unsigned long an_start; unsigned int lpm_ctrl; /* CTRL1 for resume */ }; @@ -902,8 +906,23 @@ static enum amd_xgbe_phy_an amd_xgbe_an_page_received(struct phy_device *phydev) { struct amd_xgbe_phy_priv *priv = phydev->priv; enum amd_xgbe_phy_rx *state; + unsigned long an_timeout; int ret; + if (!priv->an_start) { + priv->an_start = jiffies; + } else { + an_timeout = priv->an_start + + msecs_to_jiffies(XGBE_AN_MS_TIMEOUT); + if (time_after(jiffies, an_timeout)) { + /* Auto-negotiation timed out, reset state */ + priv->kr_state = AMD_XGBE_RX_BPA; + priv->kx_state = AMD_XGBE_RX_BPA; + + priv->an_start = jiffies; + } + } + state = amd_xgbe_phy_in_kr_mode(phydev) ? &priv->kr_state : &priv->kx_state; @@ -1078,6 +1097,7 @@ again: priv->an_state = AMD_XGBE_AN_READY; priv->kr_state = AMD_XGBE_RX_BPA; priv->kx_state = AMD_XGBE_RX_BPA; + priv->an_start = 0; } if (cur_state != priv->an_state) From 600c8811d3f608d28a6a79bfbcca08bb7962f301 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:50:10 -0500 Subject: [PATCH 4/9] amd-xgbe: Clarify output message about queues Clarify that the queues referred to in a message when the device is brought up are hardware queues and not necessarily related to the Linux network queues. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c index 400757b49872..29137c9e2200 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c @@ -2004,7 +2004,8 @@ static void xgbe_config_tx_fifo_size(struct xgbe_prv_data *pdata) for (i = 0; i < pdata->tx_q_count; i++) XGMAC_MTL_IOWRITE_BITS(pdata, i, MTL_Q_TQOMR, TQS, fifo_size); - netdev_notice(pdata->netdev, "%d Tx queues, %d byte fifo per queue\n", + netdev_notice(pdata->netdev, + "%d Tx hardware queues, %d byte fifo per queue\n", pdata->tx_q_count, ((fifo_size + 1) * 256)); } @@ -2019,7 +2020,8 @@ static void xgbe_config_rx_fifo_size(struct xgbe_prv_data *pdata) for (i = 0; i < pdata->rx_q_count; i++) XGMAC_MTL_IOWRITE_BITS(pdata, i, MTL_Q_RQOMR, RQS, fifo_size); - netdev_notice(pdata->netdev, "%d Rx queues, %d byte fifo per queue\n", + netdev_notice(pdata->netdev, + "%d Rx hardware queues, %d byte fifo per queue\n", pdata->rx_q_count, ((fifo_size + 1) * 256)); } From ceb8f6be7e5a254cb5b894be7a032170ec34607b Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:50:16 -0500 Subject: [PATCH 5/9] amd-xgbe: Use the new DMA memory barriers where appropriate Use the new lighter weight memory barriers when working with the device descriptors. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 15 +++++++++------ drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 5 ++++- 2 files changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c index 29137c9e2200..e165d069d6b0 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c @@ -1068,7 +1068,7 @@ static void xgbe_tx_desc_reset(struct xgbe_ring_data *rdata) rdesc->desc3 = 0; /* Make sure ownership is written to the descriptor */ - wmb(); + dma_wmb(); } static void xgbe_tx_desc_init(struct xgbe_channel *channel) @@ -1124,12 +1124,12 @@ static void xgbe_rx_desc_reset(struct xgbe_ring_data *rdata) * is written to the descriptor(s) before setting the OWN bit * for the descriptor */ - wmb(); + dma_wmb(); XGMAC_SET_BITS_LE(rdesc->desc3, RX_NORMAL_DESC3, OWN, 1); /* Make sure ownership is written to the descriptor */ - wmb(); + dma_wmb(); } static void xgbe_rx_desc_init(struct xgbe_channel *channel) @@ -1358,6 +1358,9 @@ static void xgbe_tx_start_xmit(struct xgbe_channel *channel, struct xgbe_prv_data *pdata = channel->pdata; struct xgbe_ring_data *rdata; + /* Make sure everything is written before the register write */ + wmb(); + /* Issue a poll command to Tx DMA by writing address * of next immediate free descriptor */ rdata = XGBE_GET_DESC_DATA(ring, ring->cur); @@ -1565,7 +1568,7 @@ static void xgbe_dev_xmit(struct xgbe_channel *channel) * is written to the descriptor(s) before setting the OWN bit * for the first descriptor */ - wmb(); + dma_wmb(); /* Set OWN bit for the first descriptor */ rdata = XGBE_GET_DESC_DATA(ring, start_index); @@ -1577,7 +1580,7 @@ static void xgbe_dev_xmit(struct xgbe_channel *channel) #endif /* Make sure ownership is written to the descriptor */ - wmb(); + dma_wmb(); ring->cur = cur_index + 1; if (!packet->skb->xmit_more || @@ -1613,7 +1616,7 @@ static int xgbe_dev_read(struct xgbe_channel *channel) return 1; /* Make sure descriptor fields are read after reading the OWN bit */ - rmb(); + dma_rmb(); #ifdef XGMAC_ENABLE_RX_DESC_DUMP xgbe_dump_rx_desc(ring, rdesc, ring->cur); diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 885b02b5be07..8635c9484b3a 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -1800,6 +1800,9 @@ static void xgbe_rx_refresh(struct xgbe_channel *channel) ring->dirty++; } + /* Make sure everything is written before the register write */ + wmb(); + /* Update the Rx Tail Pointer Register with address of * the last cleaned entry */ rdata = XGBE_GET_DESC_DATA(ring, ring->dirty - 1); @@ -1863,7 +1866,7 @@ static int xgbe_tx_poll(struct xgbe_channel *channel) /* Make sure descriptor fields are read after reading the OWN * bit */ - rmb(); + dma_rmb(); #ifdef XGMAC_ENABLE_TX_DESC_DUMP xgbe_dump_tx_desc(ring, ring->dirty, 1, 0); From 386d325dbdf16919f3416a1b6f26fcfd1c9549ff Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:50:22 -0500 Subject: [PATCH 6/9] amd-xgbe: Set DMA mask based on hardware register value The hardware supplies a value that indicates the DMA range that it is capable of using. Use this value rather than hard-coding it in the driver. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-common.h | 2 ++ drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 16 ++++++++++++++++ drivers/net/ethernet/amd/xgbe/xgbe-main.c | 19 ++++++++++--------- drivers/net/ethernet/amd/xgbe/xgbe.h | 1 + 4 files changed, 29 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h index 29a09271b64a..34c28aac767f 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h @@ -365,6 +365,8 @@ #define MAC_HWF0R_TXCOESEL_WIDTH 1 #define MAC_HWF0R_VLHASH_INDEX 4 #define MAC_HWF0R_VLHASH_WIDTH 1 +#define MAC_HWF1R_ADDR64_INDEX 14 +#define MAC_HWF1R_ADDR64_WIDTH 2 #define MAC_HWF1R_ADVTHWORD_INDEX 13 #define MAC_HWF1R_ADVTHWORD_WIDTH 1 #define MAC_HWF1R_DBGMEMA_INDEX 19 diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 8635c9484b3a..ef4625e48976 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -519,6 +519,7 @@ void xgbe_get_all_hw_features(struct xgbe_prv_data *pdata) RXFIFOSIZE); hw_feat->tx_fifo_size = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, TXFIFOSIZE); + hw_feat->dma_width = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, ADDR64); hw_feat->dcb = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, DCBEN); hw_feat->sph = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, SPHEN); hw_feat->tso = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, TSOEN); @@ -553,6 +554,21 @@ void xgbe_get_all_hw_features(struct xgbe_prv_data *pdata) break; } + /* Translate the address width setting into actual number */ + switch (hw_feat->dma_width) { + case 0: + hw_feat->dma_width = 32; + break; + case 1: + hw_feat->dma_width = 40; + break; + case 2: + hw_feat->dma_width = 48; + break; + default: + hw_feat->dma_width = 32; + } + /* The Queue, Channel and TC counts are zero based so increment them * to get the actual number */ diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-main.c b/drivers/net/ethernet/amd/xgbe/xgbe-main.c index 32dd65137051..2e4c22d94a6b 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c @@ -374,15 +374,6 @@ static int xgbe_probe(struct platform_device *pdev) pdata->awcache = XGBE_DMA_SYS_AWCACHE; } - /* Set the DMA mask */ - if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40)); - if (ret) { - dev_err(dev, "dma_set_mask_and_coherent failed\n"); - goto err_io; - } - /* Get the device interrupt */ ret = platform_get_irq(pdev, 0); if (ret < 0) { @@ -409,6 +400,16 @@ static int xgbe_probe(struct platform_device *pdev) /* Set default configuration data */ xgbe_default_config(pdata); + /* Set the DMA mask */ + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + ret = dma_set_mask_and_coherent(dev, + DMA_BIT_MASK(pdata->hw_feat.dma_width)); + if (ret) { + dev_err(dev, "dma_set_mask_and_coherent failed\n"); + goto err_io; + } + /* Calculate the number of Tx and Rx rings to be created * -Tx (DMA) Channels map 1-to-1 to Tx Queues so set * the number of Tx queues to the number of Tx channels diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h index 1eea3e5a5d08..bfe11fb06036 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe.h @@ -632,6 +632,7 @@ struct xgbe_hw_features { unsigned int rx_fifo_size; /* MTL Receive FIFO Size */ unsigned int tx_fifo_size; /* MTL Transmit FIFO Size */ unsigned int adv_ts_hi; /* Advance Timestamping High Word */ + unsigned int dma_width; /* DMA width */ unsigned int dcb; /* DCB Feature */ unsigned int sph; /* Split Header Feature */ unsigned int tso; /* TCP Segmentation Offload */ From c635eaacbf77bd6dae917925ef1e76d044b0da07 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:50:28 -0500 Subject: [PATCH 7/9] amd-xgbe: Remove Tx coalescing The Tx coalescing support in the driver was a software implementation for something lacking in the hardware. Using hrtimers, the idea was to trigger a timer interrupt after having queued a packet for transmit. Unfortunately, as the timer value was lowered, the timer expired before the hardware actually did the transmit and so it was racey and resulted in unnecessary interrupts. Remove the Tx coalescing support and hrtimer and replace with a Tx timer that is used as a reclaim timer in case of inactivity. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 7 +++---- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 16 +++++----------- drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 6 ++---- drivers/net/ethernet/amd/xgbe/xgbe.h | 4 ++-- 4 files changed, 12 insertions(+), 21 deletions(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c index e165d069d6b0..80dd7a92f357 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c @@ -1367,12 +1367,11 @@ static void xgbe_tx_start_xmit(struct xgbe_channel *channel, XGMAC_DMA_IOWRITE(channel, DMA_CH_TDTR_LO, lower_32_bits(rdata->rdesc_dma)); - /* Start the Tx coalescing timer */ + /* Start the Tx timer */ if (pdata->tx_usecs && !channel->tx_timer_active) { channel->tx_timer_active = 1; - hrtimer_start(&channel->tx_timer, - ktime_set(0, pdata->tx_usecs * NSEC_PER_USEC), - HRTIMER_MODE_REL); + mod_timer(&channel->tx_timer, + jiffies + usecs_to_jiffies(pdata->tx_usecs)); } ring->tx.xmit_more = 0; diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index ef4625e48976..122a631c4ce0 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -411,11 +411,9 @@ static irqreturn_t xgbe_dma_isr(int irq, void *data) return IRQ_HANDLED; } -static enum hrtimer_restart xgbe_tx_timer(struct hrtimer *timer) +static void xgbe_tx_timer(unsigned long data) { - struct xgbe_channel *channel = container_of(timer, - struct xgbe_channel, - tx_timer); + struct xgbe_channel *channel = (struct xgbe_channel *)data; struct xgbe_prv_data *pdata = channel->pdata; struct napi_struct *napi; @@ -437,8 +435,6 @@ static enum hrtimer_restart xgbe_tx_timer(struct hrtimer *timer) channel->tx_timer_active = 0; DBGPR("<--xgbe_tx_timer\n"); - - return HRTIMER_NORESTART; } static void xgbe_init_tx_timers(struct xgbe_prv_data *pdata) @@ -454,9 +450,8 @@ static void xgbe_init_tx_timers(struct xgbe_prv_data *pdata) break; DBGPR(" %s adding tx timer\n", channel->name); - hrtimer_init(&channel->tx_timer, CLOCK_MONOTONIC, - HRTIMER_MODE_REL); - channel->tx_timer.function = xgbe_tx_timer; + setup_timer(&channel->tx_timer, xgbe_tx_timer, + (unsigned long)channel); } DBGPR("<--xgbe_init_tx_timers\n"); @@ -475,8 +470,7 @@ static void xgbe_stop_tx_timers(struct xgbe_prv_data *pdata) break; DBGPR(" %s deleting tx timer\n", channel->name); - channel->tx_timer_active = 0; - hrtimer_cancel(&channel->tx_timer); + del_timer_sync(&channel->tx_timer); } DBGPR("<--xgbe_stop_tx_timers\n"); diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c index 43e5571fe858..376d6a529ea1 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c @@ -388,7 +388,6 @@ static int xgbe_get_coalesce(struct net_device *netdev, ec->rx_coalesce_usecs = hw_if->riwt_to_usec(pdata, riwt); ec->rx_max_coalesced_frames = pdata->rx_frames; - ec->tx_coalesce_usecs = pdata->tx_usecs; ec->tx_max_coalesced_frames = pdata->tx_frames; DBGPR("<--xgbe_get_coalesce\n"); @@ -402,13 +401,14 @@ static int xgbe_set_coalesce(struct net_device *netdev, struct xgbe_prv_data *pdata = netdev_priv(netdev); struct xgbe_hw_if *hw_if = &pdata->hw_if; unsigned int rx_frames, rx_riwt, rx_usecs; - unsigned int tx_frames, tx_usecs; + unsigned int tx_frames; DBGPR("-->xgbe_set_coalesce\n"); /* Check for not supported parameters */ if ((ec->rx_coalesce_usecs_irq) || (ec->rx_max_coalesced_frames_irq) || + (ec->tx_coalesce_usecs) || (ec->tx_coalesce_usecs_irq) || (ec->tx_max_coalesced_frames_irq) || (ec->stats_block_coalesce_usecs) || @@ -457,7 +457,6 @@ static int xgbe_set_coalesce(struct net_device *netdev, return -EINVAL; } - tx_usecs = ec->tx_coalesce_usecs; tx_frames = ec->tx_max_coalesced_frames; /* Check the bounds of values for Tx */ @@ -471,7 +470,6 @@ static int xgbe_set_coalesce(struct net_device *netdev, pdata->rx_frames = rx_frames; hw_if->config_rx_coalesce(pdata); - pdata->tx_usecs = tx_usecs; pdata->tx_frames = tx_frames; hw_if->config_tx_coalesce(pdata); diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h index bfe11fb06036..72b8f27e7216 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe.h @@ -222,7 +222,7 @@ ((_idx) & ((_ring)->rdesc_count - 1))) /* Default coalescing parameters */ -#define XGMAC_INIT_DMA_TX_USECS 50 +#define XGMAC_INIT_DMA_TX_USECS 1000 #define XGMAC_INIT_DMA_TX_FRAMES 25 #define XGMAC_MAX_DMA_RIWT 0xff @@ -410,7 +410,7 @@ struct xgbe_channel { unsigned int saved_ier; unsigned int tx_timer_active; - struct hrtimer tx_timer; + struct timer_list tx_timer; struct xgbe_ring *tx_ring; struct xgbe_ring *rx_ring; From 4a57ebcc2c1e8a924c3897df2c11c5d4620ec89e Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:50:34 -0500 Subject: [PATCH 8/9] amd-xgbe: Fix Rx coalescing reporting The Rx coalescing value is internally converted from usecs to a value that the hardware can use. When reporting the Rx coalescing value, this internal value is converted back to usecs. During the conversion from and back to usecs some rounding occurs. So, for example, when setting an Rx usec of 30, it will be reported as 29. Fix this reporting issue by keeping the original usec value and using that during reporting. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 1 + drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 12 +++++------- drivers/net/ethernet/amd/xgbe/xgbe.h | 1 + 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 122a631c4ce0..fc362be5472b 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -702,6 +702,7 @@ void xgbe_init_rx_coalesce(struct xgbe_prv_data *pdata) DBGPR("-->xgbe_init_rx_coalesce\n"); pdata->rx_riwt = hw_if->usec_to_riwt(pdata, XGMAC_INIT_DMA_RX_USECS); + pdata->rx_usecs = XGMAC_INIT_DMA_RX_USECS; pdata->rx_frames = XGMAC_INIT_DMA_RX_FRAMES; hw_if->config_rx_coalesce(pdata); diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c index 376d6a529ea1..b4f6eaaa08f0 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c @@ -377,15 +377,12 @@ static int xgbe_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { struct xgbe_prv_data *pdata = netdev_priv(netdev); - struct xgbe_hw_if *hw_if = &pdata->hw_if; - unsigned int riwt; DBGPR("-->xgbe_get_coalesce\n"); memset(ec, 0, sizeof(struct ethtool_coalesce)); - riwt = pdata->rx_riwt; - ec->rx_coalesce_usecs = hw_if->riwt_to_usec(pdata, riwt); + ec->rx_coalesce_usecs = pdata->rx_usecs; ec->rx_max_coalesced_frames = pdata->rx_frames; ec->tx_max_coalesced_frames = pdata->tx_frames; @@ -438,17 +435,17 @@ static int xgbe_set_coalesce(struct net_device *netdev, } rx_riwt = hw_if->usec_to_riwt(pdata, ec->rx_coalesce_usecs); + rx_usecs = ec->rx_coalesce_usecs; rx_frames = ec->rx_max_coalesced_frames; /* Use smallest possible value if conversion resulted in zero */ - if (ec->rx_coalesce_usecs && !rx_riwt) + if (rx_usecs && !rx_riwt) rx_riwt = 1; /* Check the bounds of values for Rx */ if (rx_riwt > XGMAC_MAX_DMA_RIWT) { - rx_usecs = hw_if->riwt_to_usec(pdata, XGMAC_MAX_DMA_RIWT); netdev_alert(netdev, "rx-usec is limited to %d usecs\n", - rx_usecs); + hw_if->riwt_to_usec(pdata, XGMAC_MAX_DMA_RIWT)); return -EINVAL; } if (rx_frames > pdata->rx_desc_count) { @@ -467,6 +464,7 @@ static int xgbe_set_coalesce(struct net_device *netdev, } pdata->rx_riwt = rx_riwt; + pdata->rx_usecs = rx_usecs; pdata->rx_frames = rx_frames; hw_if->config_rx_coalesce(pdata); diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h index 72b8f27e7216..dd742426eb04 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe.h @@ -716,6 +716,7 @@ struct xgbe_prv_data { /* Rx coalescing settings */ unsigned int rx_riwt; + unsigned int rx_usecs; unsigned int rx_frames; /* Current Rx buffer size */ From 385565a1f0d365793e1f90746237d508bfeef9af Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:50:41 -0500 Subject: [PATCH 9/9] amd-xgbe: Use napi_alloc_skb when allocating skb in softirq Use the napi_alloc_skb function to allocate an skb when running within the softirq context to avoid calls to local_irq_save/restore. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index fc362be5472b..347fe2419a18 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -1821,16 +1821,15 @@ static void xgbe_rx_refresh(struct xgbe_channel *channel) lower_32_bits(rdata->rdesc_dma)); } -static struct sk_buff *xgbe_create_skb(struct xgbe_prv_data *pdata, +static struct sk_buff *xgbe_create_skb(struct napi_struct *napi, struct xgbe_ring_data *rdata, unsigned int *len) { - struct net_device *netdev = pdata->netdev; struct sk_buff *skb; u8 *packet; unsigned int copy_len; - skb = netdev_alloc_skb_ip_align(netdev, rdata->rx.hdr.dma_len); + skb = napi_alloc_skb(napi, rdata->rx.hdr.dma_len); if (!skb) return NULL; @@ -2000,7 +1999,7 @@ read_again: rdata->rx.hdr.dma_len, DMA_FROM_DEVICE); - skb = xgbe_create_skb(pdata, rdata, &put_len); + skb = xgbe_create_skb(napi, rdata, &put_len); if (!skb) { error = 1; goto skip_data;